| Age | Commit message (Collapse) | Author |
|---|
|
commit 278bcb7300f61785dba63840bd2a8cf79f14554c upstream.
By just cancelling the deferred rx worker during GLINK instance teardown
any pending deferred commands are leaked, so free them.
Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver")
Cc: stable@vger.kernel.org
Acked-by: Chris Lew <clew@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit c3dadc19b7564c732598b30d637c6f275c3b77b6 upstream.
Attempting to transmit rx_done messages after the GLINK instance is
being torn down will cause use after free and memory leaks. So cancel
the intent_work and free up the pending intents.
With this there are no concurrent accessors of the channel left during
qcom_glink_native_remove() and there is therefor no need to hold the
spinlock during this operation - which would prohibit the use of
cancel_work_sync() in the release function. So remove this.
Fixes: 1d2ea36eead9 ("rpmsg: glink: Add rx done command")
Cc: stable@vger.kernel.org
Acked-by: Chris Lew <clew@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit f7e714988edaffe6ac578318e99501149b067ba0 upstream.
The device release function is set before registering with rpmsg. If
rpmsg registration fails, the framework will call device_put(), which
invokes the release function. The channel create logic does not need to
free rpdev if rpmsg_register_device() fails and release is called.
Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver")
Cc: stable@vger.kernel.org
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit b646293e272816dd0719529dcebbd659de0722f7 upstream.
In a remote processor crash scenario, there is no guarantee the remote
processor sent close requests before it went into a bad state. Remove
the reference that is normally handled by the close command in the
so channel resources can be released.
Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver")
Cc: stable@vger.kernel.org
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Chris Lew <clew@codeaurora.org>
Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit ac74ea01860170699fb3b6ea80c0476774c8e94f upstream.
Extra channel reference put when remote sending OPEN_ACK after timeout
causes use-after-free while handling next remote CLOSE command.
Remove extra reference put in timeout case to avoid use-after-free.
Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver")
Cc: stable@vger.kernel.org
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit b85f6b601407347f5425c4c058d1b7871f5bf4f0 upstream.
Memory allocated for re-usable intents are not freed during channel
cleanup which causes memory leak in system.
Check and free all re-usable memory to avoid memory leak.
Fixes: 933b45da5d1d ("rpmsg: glink: Add support for TX intents")
Cc: stable@vger.kernel.org
Acked-By: Chris Lew <clew@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 4623e8bf1de0b86e23a56cdb39a72f054e89c3bd upstream.
When wrapping around the FIFO, the remote expects the tail pointer to
be reset to 0 on the edge case where the tail equals the FIFO length.
Fixes: caf989c350e8 ("rpmsg: glink: Introduce glink smem based transport")
Cc: stable@vger.kernel.org
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit bbe692e349e2a1edf3fe0a29a0e05899c9c94d51 upstream.
In rpmsg_eptdev_write_iter, if copy_from_iter_full fails the allocated
buffer needs to be released.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
Make header files alphabetical order.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Remoteproc is now capable to create one specific sub-device per
virtio link to associate a dedicated memory pool.
This implies to change device used by virtio_rpmsg for
buffer allocation from grand-parent to parent.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The current rx peak function fails to read the data if size is
less than 4bytes.
Use memcpy_fromio to support data reads of size less than 4 bytes.
Cc: stable@vger.kernel.org
Fixes: f0beb4ba9b18 ("rpmsg: glink: Remove chunk size word align warning")
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Currently a failed allocation of channel->name leads to an
immediate return without freeing channel. Fix this by setting
ret to -ENOMEM and jumping to an exit path that kfree's channel.
Detected by CoverityScan, CID#1473692 ("Resource Leak")
Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend")
Cc: stable@vger.kernel.org
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
It is possible for the chunk sizes coming from the non RPM remote procs
to not be word aligned. Remove the alignment warning and continue to
read from the FIFO so execution is not stalled.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-remoteproc@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
In order to be able to use the aio interface for writing to a rpmsg_char
the write_iter function must be implemented, so migrate to iter version
for read and write functions.
Regular read and write uses the iter methods if present and is as such
unaffected.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add compat ioctl callback to support 32bit user space applications.
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Channels may need to identify the edge their channel was probed for.
Store the edge name by reading the label property from device tree or
default to the node name.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Some of the rpmsg devices need to switch on power domains to communicate
with remote processor. For example on Qualcomm DB820c platform LPASS
power domain needs to switched on for any kind of audio services.
This patch adds the missing power domain support in rpmsg core.
Without this patch attempting to play audio via QDSP on DB820c would
reboot the system.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This patch fixes below kerneldoc warnings
qcom_smd.c:141: warning: Function parameter or member 'dev' not described in 'qcom_smd_edge'
qcom_smd.c:141: warning: Function parameter or member 'name' not described in 'qcom_smd_edge'
qcom_smd.c:141: warning: Function parameter or member 'new_channel_event' not described in 'qcom_smd_edge'
qcom_smd.c:222: warning: Function parameter or member 'qsept' not described in 'qcom_smd_channel'
qcom_smd.c:222: warning: Function parameter or member 'registered' not described in 'qcom_smd_channel'
qcom_smd.c:222: warning: Function parameter or member 'state_change_event' not described in 'qcom_smd_channel'
qcom_smd.c:222: warning: Function parameter or member 'drvdata' not described in 'qcom_smd_channel'
qcom_smd.c:737: warning: Function parameter or member 'wait' not described in '__qcom_smd_send'
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Fix below kerneldoc warnings while building with W=1
qcom_glink_native.c:53: warning: Function parameter or member 'data' not described in 'glink_defer_cmd'
qcom_glink_native.c:75: warning: Function parameter or member 'data' not described in 'glink_core_rx_intent'
qcom_glink_native.c:75: warning: Function parameter or member 'id' not described in 'glink_core_rx_intent'
qcom_glink_native.c:75: warning: Function parameter or member 'size' not described in 'glink_core_rx_intent'
qcom_glink_native.c:75: warning: Function parameter or member 'reuse' not described in 'glink_core_rx_intent'
qcom_glink_native.c:75: warning: Function parameter or member 'in_use' not described in 'glink_core_rx_intent'
qcom_glink_native.c:75: warning: Function parameter or member 'offset' not described in 'glink_core_rx_intent'
qcom_glink_native.c:75: warning: Function parameter or member 'node' not described in 'glink_core_rx_intent'
qcom_glink_native.c:116: warning: Function parameter or member 'features' not described in 'qcom_glink'
qcom_glink_native.c:116: warning: Function parameter or member 'intentless' not described in 'qcom_glink'
qcom_glink_native.c:524: warning: Function parameter or member 'version' not described in 'qcom_glink_receive_version'
qcom_glink_native.c:524: warning: Function parameter or member 'features' not described in 'qcom_glink_receive_version'
qcom_glink_native.c:524: warning: Excess function parameter 'r_version' description in 'qcom_glink_receive_version'
qcom_glink_native.c:524: warning: Excess function parameter 'r_features' description in 'qcom_glink_receive_version'
qcom_glink_native.c:551: warning: Function parameter or member 'version' not described in 'qcom_glink_receive_version_ack'
qcom_glink_native.c:551: warning: Function parameter or member 'features' not described in 'qcom_glink_receive_version_ack'
qcom_glink_native.c:551: warning: Excess function parameter 'r_version' description in 'qcom_glink_receive_version_ack'
qcom_glink_native.c:551: warning: Excess function parameter 'r_features' description in 'qcom_glink_receive_version_ack'
qcom_glink_native.c:570: warning: bad line: wire format and transmit
qcom_glink_native.c:604: warning: Function parameter or member 'intent' not described in 'qcom_glink_advertise_intent'
qcom_glink_native.c:604: warning: Excess function parameter 'size' description in 'qcom_glink_advertise_intent'
qcom_glink_native.c:710: warning: Function parameter or member 'glink' not described in 'qcom_glink_handle_intent_req'
qcom_glink_native.c:710: warning: Function parameter or member 'cid' not described in 'qcom_glink_handle_intent_req'
qcom_glink_native.c:710: warning: Function parameter or member 'size' not described in 'qcom_glink_handle_intent_req'
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
As intent structure members are not correctly annotated, leading to below warnings
qcom_glink_native.c:614:16: warning: incorrect type in assignment (different base types)
qcom_glink_native.c:614:16: expected unsigned short [unsigned] [usertype] id
qcom_glink_native.c:614:16: got restricted __le16 [usertype] <noident>
qcom_glink_native.c:615:18: warning: incorrect type in assignment (different base types)
qcom_glink_native.c:615:18: expected unsigned short [unsigned] [usertype] lcid
qcom_glink_native.c:615:18: got restricted __le16 [usertype] <noident>
qcom_glink_native.c:616:19: warning: incorrect type in assignment (different base types)
qcom_glink_native.c:616:19: expected unsigned int [unsigned] [usertype] count
qcom_glink_native.c:616:19: got restricted __le32 [usertype] <noident>
qcom_glink_native.c:617:18: warning: incorrect type in assignment (different base types)
qcom_glink_native.c:617:18: expected unsigned int [unsigned] [usertype] size
qcom_glink_native.c:617:18: got restricted __le32 [usertype] <noident>
qcom_glink_native.c:618:18: warning: incorrect type in assignment (different base types)
qcom_glink_native.c:618:18: expected unsigned int [unsigned] [usertype] liid
qcom_glink_native.c:618:18: got restricted __le32 [usertype] <noident>
Fix this by correctly annotating them.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add missing include of sizes.h.
drivers/rpmsg/qcom_smd.c: In function ‘qcom_smd_channel_open’:
drivers/rpmsg/qcom_smd.c:809:36: error: ‘SZ_4K’ undeclared (first use in this function)
bb_size = min(channel->fifo_size, SZ_4K);
^~~~~
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
All the managed resources would be freed by the time release function
is invoked. Handling such memory in qcom_smd_edge_release() would do
bad things.
Found this issue while testing Audio usecase where the dsp is started up
and shutdown in a loop.
This patch fixes this issue by using simple kzalloc for allocating
channel->name and channel which is then freed in qcom_smd_edge_release().
Without this patch restarting a remoteproc would crash the system.
Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend")
Cc: <stable@vger.kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Use the appropriate SPDX license identifier in the rpmsg char driver
source file and drop the previous boilerplate license text. The uapi
header file already had the SPDX license identifier added as part of
a mass update but the license text removal was deferred for later,
and this patch drops the same.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Use the appropriate SPDX license identifier in various rpmsg
glink driver source files and drop the previous boilerplate
license text.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Use the appropriate SPDX license identifier in the rpmsg SMD backend
driver source file and drop the previous boilerplate license text.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Use the appropriate SPDX license identifier in the virtio rpmsg
bus driver source file and drop the previous boilerplate license
text.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Use the appropriate SPDX license identifier in the rpmsg core
source files and drop the previous boilerplate license text.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Pick up fixes from rproc-v4.17-1
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Attempt to acquire the APCS IPC through the mailbox framework and fall
back to the old syscon based approach, to allow us to move away from
using the syscon.
Reviewed-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This patch adds "driver_override" device attribute for rpmsg_device which
will allow users to explicitly specify the rpmsg_driver to be used via
sysfs entry.
The "driver_override" device attribute implemented here is very similar
to "driver_override" implemented for platform, pci, and amba bus types.
One important use-case of "driver_override" device attribute is to force
use of rpmsg_chrdev driver for certain rpmsg_device instances.
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Added "rpmsg:rpmsg_chrdev" MODULE_ALIAS to autoload
rpmg_chrdev module automatically.
Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
It is possible that incoming data arrives before the client driver has
reached a point in the probe method where adequate context for handling
the incoming message has been established.
In the event that the client's callback function returns an error the
message will be left on the FIFO and by invoking the receive handler
after the device has been probed the message will be picked off the FIFO
and the callback invoked again.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
For special rpmsg devices without a primary endpoint there is nothing to
announce so don't call the backend announce create function if we didn't
create an endpoint.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The container_of macros should not use the same name for the parameter
as the member to use for lookup, as this will result in a compilation
error unless the passed parameter has the same name as the member.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
In an effort to pick up channels that are in a funky state we
optimistically tried to open all channels that we found, with the
addition that we failed if the other side did not handshake the opening.
But as we're starting the modem a second time all channels are found -
in a "funky" state - and we try to open them. But the modem firmware
requires the IPCRTR to be up in order to initialize. So any channels we
try to open before that will fail and will not be opened again.
This takes care of the regression, at the cost of reintroducing the
previous behavior of handling of channels with "funky" states.
Reverts commit c12fc4519f60 ("rpmsg: smd: Create device for all channels")
Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Switch the tx_lock to a spinlock we allow clients to use rpmsg_trysend()
from atomic context.
In order to allow clients to sleep while waiting for space in the FIFO
we release the lock temporarily around the delay; which should be
replaced by sending a READ_NOTIF and waiting for the remote to signal
us that space has been made available.
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
By switching the tx_lock to a spinlock we allow clients to use
rpmsg_trysend() from atomic context.
The mutex was interruptable as it was previously held for the duration
of some client waiting for available space in the FIFO, but this was
recently changed to only be held temporarily - allowing us to replace it
with a spinlock.
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
if device_register() returned an error! Always use put_device()
to give up the reference initialized. unregister device for
other return error.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
if device_register() returned an error! Always use put_device()
to give up the reference initialized. And unregister device for
other return error.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull rpmsg updates from Bjorn Andersson:
"This fixes a few issues found in the SMD and GLINK drivers and
corrects the handling of SMD channels that are found in an
(previously) unexpected state"
* tag 'rpmsg-v4.16' of git://github.com/andersson/remoteproc:
rpmsg: smd: Fix double unlock in __qcom_smd_send()
rpmsg: glink: Fix missing mutex_init() in qcom_glink_alloc_channel()
rpmsg: smd: Don't hold the tx lock during wait
rpmsg: smd: Fail send on a closed channel
rpmsg: smd: Wake up all waiters
rpmsg: smd: Create device for all channels
rpmsg: smd: Perform handshake during open
rpmsg: glink: smem: Ensure ordering during tx
drivers: rpmsg: remove duplicate includes
remoteproc: qcom: Use PTR_ERR_OR_ZERO() in glink prob
|
|
We're not holding the lock here, so we shouldn't unlock.
Fixes: 178f3f75bb4e ("rpmsg: smd: Don't hold the tx lock during wait")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[bjorn: renamed "out" label to further distinguish the two exit paths]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
qcom_glink_alloc_channel() allocates the mutex but not initialize it.
Use mutex_init() on it to initialize it correctly.
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Holding the tx lock while waiting for tx-drain events from the remote
side blocks try_send requests from failing quickly, so temporarily drop
the tx lock while waiting.
While this allows try_send to fail quickly it also could allow a
subsequent send to succeed putting a smaller packet in the FIFO while
we're waiting for room for our large packet. But as this lock is per
channel we expect that clients with ordering concerns implements their
own ordering mechanism.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Move the check for a closed channel out from the tx-full loop to fail
any send request on a non-open channel.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
It's possible to have multiple contexts waiting for new channel events
and with an upcoming change it's possible to have multiple contexts
waiting for a full FIFO. As such we need to wake them all up.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Rather than selectively creating devices only for the channels that the
remote have moved to "opening" state let's create devices for all
channels found. The driver model will match drivers to the ones we care
about and attempt to open these.
The one case where this fails is if the user loads a firmware that lacks
a particular channel of the previous firmware that was running, in which
case we would find the old channel and attempt to probe it. The channel
opening handshake will ensure this will result in a graceful failure.
The result of this patch is that we will actively open the RPM channel
even though it's left in a state other than "opening" after the boot
loader's closing of the channel.
Tested-by: Will Newton <will.newton@gmail.com>
Reported-by: Jeremy McNicoll <jmcnicol@redhat.com>
Reported-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Validate the the remote side is opening the channel that we've found by
performing a handshake when opening the channel.
Tested-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Ensure the ordering of the fifo write and the update of the write index,
so that the index is not updated before the data has landed in the fifo.
Acked-By: Chris Lew <clew@codeaurora.org>
Reported-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
Bjorn Andersson
Chris Lew
Arun Kumar Neelakantam
Navid Emamdoost
Loic Pallardy
Colin Ian King
Rob Herring
Srinivas Kandagatla
Niklas Cassel
Suman Anna
Anup Patel
Ramon Fried
Arvind Yadav
Linus Torvalds
Dan Carpenter
Wei Yongjun