Age | Commit message (Collapse) | Author |
|
commit ddcdc368b1033e19fd3a5f750752e10e28a87826 upstream.
get_zeroed_page() returns a virtual address for the page which is better
than allocating a struct page and doing a permanent kmap on it.
Cc: stable@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8f0916c6dc5cd5e3bc52416fa2a9ff4075080180 ]
ethtool user spaces needs to know ring count via ETHTOOL_GRXRINGS when
executing (ethtool -x) which is retrieved via ethtool get_rxnfc callback,
in mlx5 this callback is disabled when CONFIG_MLX5_EN_RXNFC=n.
This patch allows only ETHTOOL_GRXRINGS command on mlx5e_get_rxnfc() when
CONFIG_MLX5_EN_RXNFC is disabled, so ethtool -x will continue working.
Fixes: fe6d86b3c316 ("net/mlx5e: Add CONFIG_MLX5_EN_RXNFC for ethtool rx nfc")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bad861f31bb15a99becef31aab59640eaeb247e2 ]
mlxfw can be compiled as external module while mlx5_core can be
builtin, in such case mlx5 will act like mlxfw is disabled.
Since mlxfw is just a service library for mlx* drivers,
imply it in mlx5_core to make it always reachable if it was enabled.
Fixes: 3ffaabecd1a1 ("net/mlx5e: Support the flash device ethtool callback")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c979c445a88e1c9dd7d8f90838c10456ae4ecd09 ]
Flow destination comparison has an inaccuracy: code see no
difference between same vf ports, which belong to different pfs.
Example: If start ping from VF0 (PF1) to VF1 (PF1) and mirror
all traffic to VF0 (PF2), icmp reply to VF0 (PF1) and mirrored
flow to VF0 (PF2) would be determined as same destination. It lead
to creating flow handler with rule nodes, which not added to node
tree. When later driver try to delete this flow rules we got
kernel crash.
Add comparison of vhca_id field to avoid this.
Fixes: 1228e912c934 ("net/mlx5: Consider encapsulation properties when comparing destinations")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cf83c8fdcd4756644595521f48748ec22f7efede ]
For all representors added firmware version info to show in
ethtool driver info.
For uplink representor, because only it is tied to the pci device
sysfs, added pci bus info.
Fixes: ff9b85de5d5d ("net/mlx5e: Add some ethtool port control entries to the uplink rep netdev")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Gavi Teitz <gavi@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cb07d915bf278a7a3938b983bbcb4921366b5eff ]
Add rcu locks when accessing netdev when processing route request
and tunnel keep alive messages received from hardware.
Fixes: 8e6a9046b66a ("nfp: flower vxlan neighbour offload")
Fixes: 856f5b135758 ("nfp: flower vxlan neighbour keep-alive")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 00f9fec48157f3734e52130a119846e67a12314b ]
The error print within mlx4_flow_steer_promisc_add() should
be a info print.
Fixes: 592e49dda812 ('net/mlx4: Implement promiscuous mode with device managed flow-steering')
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ee0df19305d9fabd9479b785918966f6e25b733b ]
When changing the number of buffers in the RX ring while the interface
is running, the following Oops is encountered due to the new number
of buffers being taken into account immediately while their allocation
is done when opening the device only.
[ 69.882706] Unable to handle kernel paging request for data at address 0xf0000100
[ 69.890172] Faulting instruction address: 0xc033e164
[ 69.895122] Oops: Kernel access of bad area, sig: 11 [#1]
[ 69.900494] BE PREEMPT CMPCPRO
[ 69.907120] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.115-00006-g179ade8ce3-dirty #269
[ 69.915956] task: c0684310 task.stack: c06da000
[ 69.920470] NIP: c033e164 LR: c02e44d0 CTR: c02e41fc
[ 69.925504] REGS: dfff1e20 TRAP: 0300 Not tainted (4.14.115-00006-g179ade8ce3-dirty)
[ 69.934161] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 22004428 XER: 20000000
[ 69.940869] DAR: f0000100 DSISR: 20000000
[ 69.940869] GPR00: c0352d70 dfff1ed0 c0684310 f00000a4 00000040 dfff1f68 00000000 0000001f
[ 69.940869] GPR08: df53f410 1cc00040 00000021 c0781640 42004424 100c82b6 f00000a4 df53f5b0
[ 69.940869] GPR16: df53f6c0 c05daf84 00000040 00000000 00000040 c0782be4 00000000 00000001
[ 69.940869] GPR24: 00000000 df53f400 000001b0 df53f410 df53f000 0000003f df708220 1cc00044
[ 69.978348] NIP [c033e164] skb_put+0x0/0x5c
[ 69.982528] LR [c02e44d0] ucc_geth_poll+0x2d4/0x3f8
[ 69.987384] Call Trace:
[ 69.989830] [dfff1ed0] [c02e4554] ucc_geth_poll+0x358/0x3f8 (unreliable)
[ 69.996522] [dfff1f20] [c0352d70] net_rx_action+0x248/0x30c
[ 70.002099] [dfff1f80] [c04e93e4] __do_softirq+0xfc/0x310
[ 70.007492] [dfff1fe0] [c0021124] irq_exit+0xd0/0xd4
[ 70.012458] [dfff1ff0] [c000e7e0] call_do_irq+0x24/0x3c
[ 70.017683] [c06dbe80] [c0006bac] do_IRQ+0x64/0xc4
[ 70.022474] [c06dbea0] [c001097c] ret_from_except+0x0/0x14
[ 70.027964] --- interrupt: 501 at rcu_idle_exit+0x84/0x90
[ 70.027964] LR = rcu_idle_exit+0x74/0x90
[ 70.037585] [c06dbf60] [20000000] 0x20000000 (unreliable)
[ 70.042984] [c06dbf80] [c004bb0c] do_idle+0xb4/0x11c
[ 70.047945] [c06dbfa0] [c004bd14] cpu_startup_entry+0x18/0x1c
[ 70.053682] [c06dbfb0] [c05fb034] start_kernel+0x370/0x384
[ 70.059153] [c06dbff0] [00003438] 0x3438
[ 70.063062] Instruction dump:
[ 70.066023] 38a00000 38800000 90010014 4bfff015 80010014 7c0803a6 3123ffff 7c691910
[ 70.073767] 38210010 4e800020 38600000 4e800020 <80e3005c> 80c30098 3107ffff 7d083910
[ 70.081690] ---[ end trace be7ccd9c1e1a9f12 ]---
This patch forbids the modification of the number of buffers in the
ring while the interface is running.
Fixes: ac421852b3a0 ("ucc_geth: add ethtool support")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5afcd14cfc7fed1bcc8abcee2cef82732772bfc2 ]
The old MIPS implementation of dma_cache_sync() didn't use the dev argument,
but commit c9eb6172c328 ("dma-mapping: turn dma_cache_sync into a
dma_map_ops method") changed that, so we now need to set dev.parent.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0504453139ef5a593c9587e1e851febee859c7d8 ]
Current order in open:
-> Enable interrupts (macb_init_hw)
-> Enable NAPI
-> Start PHY
Sequence of RX handling:
-> RX interrupt occurs
-> Interrupt is cleared and interrupt bits disabled in handler
-> NAPI is scheduled
-> In NAPI, RX budget is processed and RX interrupts are re-enabled
With the above, on QEMU or fixed link setups (where PHY state doesn't
matter), there's a chance macb RX interrupt occurs before NAPI is
enabled. This will result in NAPI being scheduled before it is enabled.
Fix this macb open by changing the order.
Fixes: ae1f2a56d273 ("net: macb: Added support for many RX queues")
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d4c26eb6e721683a0f93e346ce55bc8dc3cbb175 ]
When adding more MAC addresses to a dwmac-sun8i interface, the device goes
directly in promiscuous mode.
This is due to IFF_UNICAST_FLT missing flag.
So since the hardware support unicast filtering, let's add IFF_UNICAST_FLT.
Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 17170e6570c082717c142733d9a638bcd20551f8 ]
Fix issue with the entry indexing in the sg frame cleanup code being
off-by-1. This problem showed up when doing some basic iperf tests and
manifested in traffic coming to a halt.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8b318f30ab4ef9bbc1241e6f8c1db366dbd347f2 ]
The Phylink validate function is the Marvell PPv2 driver makes a check
on the GoP id. This is valid an has to be done when using PPv2.2 engines
but makes no sense when using PPv2.1. The check done when using an RGMII
interface makes sure the GoP id is not 0, but this breaks PPv2.1. Fixes
it.
Fixes: 0fb628f0f250 ("net: mvpp2: fix phylink handling of invalid PHY modes")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
|
|
[ Upstream commit a8fd48b50deaa20808bbf0f6685f6f1acba6a64c ]
Preemption disabled at:
[<ffff000008cabd54>] dev_set_rx_mode+0x1c/0x38
Call trace:
[<ffff00000808a5c0>] dump_backtrace+0x0/0x3d0
[<ffff00000808a9a4>] show_stack+0x14/0x20
[<ffff000008e6c0c0>] dump_stack+0xac/0xe4
[<ffff0000080fe76c>] ___might_sleep+0x164/0x238
[<ffff0000080fe890>] __might_sleep+0x50/0x88
[<ffff0000082261e4>] kmem_cache_alloc+0x17c/0x1d0
[<ffff000000ea0ae8>] ocelot_set_rx_mode+0x108/0x188 [mscc_ocelot_common]
[<ffff000008cabcf0>] __dev_set_rx_mode+0x58/0xa0
[<ffff000008cabd5c>] dev_set_rx_mode+0x24/0x38
Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0d72c2ac89185f179da1e8a91c40c82f3fa38f0b ]
Separate the overflow handling from the hardware interrupt status analysis.
The interrupt status is a single register and is common for all PFs. The
first PF reading the register is not necessarily the one who overflowed.
All PFs must check their overflow status on every attention.
In this change we clear the sticky indication in the attention handler to
allow doorbells to be processed again as soon as possible, but running
the doorbell recovery is scheduled for the periodic handler to reduce the
time spent in the attention handler.
Checking the need for DORQ flush was changed to "db_bar_no_edpm" because
qed_edpm_enabled()'s result could change dynamically and might have
prevented a needed flush.
Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4476b8a6151b2dd86c09b5acec64f66430db55d ]
When the DORQ (doorbell block) is overflowed, all PFs get attentions at the
same time. If one PF finished handling the attention before another PF even
started, the second PF might miss the DORQ's attention bit and not handle
the attention at all.
If the DORQ attention is missed and the issue is not resolved, another
attention will not be sent, therefore each attention is treated as a
potential DORQ attention.
As a result, the attention callback is called more frequently so the debug
print was moved to reduce its quantity.
The number of periodic doorbell recovery handler schedules was reduced
because it was the previous way to mitigating the missed attention issue.
Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b61b04ad81d5f975349d66abbecabf96ba211140 ]
Fix the condition which verifies that doorbell address is inside the
doorbell bar by checking that the end of the address is within range
as well.
Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9ac6bb1414ac0d45fe9cefbd1f5b06f0e1a3c98a ]
DB_REC_DRY_RUN (running doorbell recovery without sending doorbells) is
never used. DB_REC_ONCE (send a single doorbell from the doorbell recovery)
is not needed anymore because by running the periodic handler we make sure
we check the overflow status later instead.
This patch is needed because in the next patches, the only doorbell
recovery type being used is DB_REC_REAL_DEAL, and the fixes are much
cleaner without this enum.
Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1dc2b3d65523780ed1972d446c76e62e13f3e8f5 ]
The err2 error return path calls qede_ptp_disable that cleans up
on an error and frees ptp. After this, the free'd ptp is dereferenced
when ptp->clock is set to NULL and the code falls-through to error
path err1 that frees ptp again.
Fix this by calling qede_ptp_disable and exiting via an error
return path that does not set ptp->clock or kfree ptp.
Addresses-Coverity: ("Write to pointer after free")
Fixes: 035744975aec ("qede: Add support for PTP resource locking.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a2c34f18c94b596562bf3d019fceab998b8b584 ]
Currently if a pci dma mapping failure is detected a free'd
memblock address is returned rather than a NULL (that indicates
an error). Fix this by ensuring NULL is returned on this error case.
Addresses-Coverity: ("Use after free")
Fixes: 528f727279ae ("vxge: code cleanup and reorganization")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f87db4dbd52f2f8a170a2b51cb0926221ca7c9e2 upstream.
gcc warn this:
drivers/net/ethernet/stmicro/stmmac/norm_desc.c: In function ndesc_init_rx_desc:
drivers/net/ethernet/stmicro/stmmac/norm_desc.c:138:6: warning: variable 'bfsize1' set but not used [-Wunused-but-set-variable]
Like enh_desc_init_rx_desc, we should use bfsize1
in ndesc_init_rx_desc to calculate 'p->des1'
Fixes: 583e63614149 ("net: stmmac: use correct DMA buffer size in the RX descriptor")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cc5a726c79158bd307150e8d4176ec79b52001ea ]
BITS_TO_LONGS() uses DIV_ROUND_UP() because of
this ppmax value can be greater than available
per cpu page pods.
This patch removes BITS_TO_LONGS() to fix this
issue.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit 8601a99d7c0256b7a7fdd1ab14cf6c1f1dfcadc6 ]
When enable SMMU, remove HNS driver will cause a WARNING:
[ 141.924177] WARNING: CPU: 36 PID: 2708 at drivers/iommu/dma-iommu.c:443 __iommu_dma_unmap+0xc0/0xc8
[ 141.954673] Modules linked in: hns_enet_drv(-)
[ 141.963615] CPU: 36 PID: 2708 Comm: rmmod Tainted: G W 5.0.0-rc1-28723-gb729c57de95c-dirty #32
[ 141.983593] Hardware name: Huawei D05/D05, BIOS Hisilicon D05 UEFI Nemo 1.8 RC0 08/31/2017
[ 142.000244] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 142.009886] pc : __iommu_dma_unmap+0xc0/0xc8
[ 142.018476] lr : __iommu_dma_unmap+0xc0/0xc8
[ 142.027066] sp : ffff000013533b90
[ 142.033728] x29: ffff000013533b90 x28: ffff8013e6983600
[ 142.044420] x27: 0000000000000000 x26: 0000000000000000
[ 142.055113] x25: 0000000056000000 x24: 0000000000000015
[ 142.065806] x23: 0000000000000028 x22: ffff8013e66eee68
[ 142.076499] x21: ffff8013db919800 x20: 0000ffffefbff000
[ 142.087192] x19: 0000000000001000 x18: 0000000000000007
[ 142.097885] x17: 000000000000000e x16: 0000000000000001
[ 142.108578] x15: 0000000000000019 x14: 363139343a70616d
[ 142.119270] x13: 6e75656761705f67 x12: 0000000000000000
[ 142.129963] x11: 00000000ffffffff x10: 0000000000000006
[ 142.140656] x9 : 1346c1aa88093500 x8 : ffff0000114de4e0
[ 142.151349] x7 : 6662666578303d72 x6 : ffff0000105ffec8
[ 142.162042] x5 : 0000000000000000 x4 : 0000000000000000
[ 142.172734] x3 : 00000000ffffffff x2 : ffff0000114de500
[ 142.183427] x1 : 0000000000000000 x0 : 0000000000000035
[ 142.194120] Call trace:
[ 142.199030] __iommu_dma_unmap+0xc0/0xc8
[ 142.206920] iommu_dma_unmap_page+0x20/0x28
[ 142.215335] __iommu_unmap_page+0x40/0x60
[ 142.223399] hnae_unmap_buffer+0x110/0x134
[ 142.231639] hnae_free_desc+0x6c/0x10c
[ 142.239177] hnae_fini_ring+0x14/0x34
[ 142.246540] hnae_fini_queue+0x2c/0x40
[ 142.254080] hnae_put_handle+0x38/0xcc
[ 142.261619] hns_nic_dev_remove+0x54/0xfc [hns_enet_drv]
[ 142.272312] platform_drv_remove+0x24/0x64
[ 142.280552] device_release_driver_internal+0x17c/0x20c
[ 142.291070] driver_detach+0x4c/0x90
[ 142.298259] bus_remove_driver+0x5c/0xd8
[ 142.306148] driver_unregister+0x2c/0x54
[ 142.314037] platform_driver_unregister+0x10/0x18
[ 142.323505] hns_nic_dev_driver_exit+0x14/0xf0c [hns_enet_drv]
[ 142.335248] __arm64_sys_delete_module+0x214/0x25c
[ 142.344891] el0_svc_common+0xb0/0x10c
[ 142.352430] el0_svc_handler+0x24/0x80
[ 142.359968] el0_svc+0x8/0x7c0
[ 142.366104] ---[ end trace 60ad1cd58e63c407 ]---
The tx ring buffer map when xmit and unmap when xmit done. So in
hnae_init_ring() did not map tx ring buffer, but in hnae_fini_ring()
have a unmap operation for tx ring buffer, which is already unmapped
when xmit done, than cause this WARNING.
The hnae_alloc_buffers() is called in hnae_init_ring(),
so the hnae_free_buffers() should be in hnae_fini_ring(), not in
hnae_free_desc().
In hnae_fini_ring(), adds a check is_rx_ring() as in hnae_init_ring().
When the ring buffer is tx ring, adds a piece of code to ensure that
the tx ring is unmap.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit f058e46855dcbc28edb2ed4736f38a71fd19cadb ]
ICMP6 neighbor solicitation messages will be discard by the Hip06
chips, because of not setting forwarding pool. Enable promisc mode
has the same problem.
This patch fix the wrong forwarding table configs for the multicast
vague matching when enable promisc mode, and add forwarding pool
for the forwarding table.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit c0b0984426814f3a9251873b689e67d34d8ccd84 ]
When reboot the system again and again, may cause a memory
overwrite.
[ 15.638922] systemd[1]: Reached target Swap.
[ 15.667561] tun: Universal TUN/TAP device driver, 1.6
[ 15.676756] Bridge firewalling registered
[ 17.344135] Unable to handle kernel paging request at virtual address 0000000200000040
[ 17.352179] Mem abort info:
[ 17.355007] ESR = 0x96000004
[ 17.358105] Exception class = DABT (current EL), IL = 32 bits
[ 17.364112] SET = 0, FnV = 0
[ 17.367209] EA = 0, S1PTW = 0
[ 17.370393] Data abort info:
[ 17.373315] ISV = 0, ISS = 0x00000004
[ 17.377206] CM = 0, WnR = 0
[ 17.380214] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____)
[ 17.386926] [0000000200000040] pgd=0000000000000000
[ 17.391878] Internal error: Oops: 96000004 [#1] SMP
[ 17.396824] CPU: 23 PID: 95 Comm: kworker/u130:0 Tainted: G E 4.19.25-1.2.78.aarch64 #1
[ 17.414175] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.54 08/16/2018
[ 17.425615] Workqueue: events_unbound async_run_entry_fn
[ 17.435151] pstate: 00000005 (nzcv daif -PAN -UAO)
[ 17.444139] pc : __mutex_lock.isra.1+0x74/0x540
[ 17.453002] lr : __mutex_lock.isra.1+0x3c/0x540
[ 17.461701] sp : ffff000100d9bb60
[ 17.469146] x29: ffff000100d9bb60 x28: 0000000000000000
[ 17.478547] x27: 0000000000000000 x26: ffff802fb8945000
[ 17.488063] x25: 0000000000000000 x24: ffff802fa32081a8
[ 17.497381] x23: 0000000000000002 x22: ffff801fa2b15220
[ 17.506701] x21: ffff000009809000 x20: ffff802fa23a0888
[ 17.515980] x19: ffff801fa2b15220 x18: 0000000000000000
[ 17.525272] x17: 0000000200000000 x16: 0000000200000000
[ 17.534511] x15: 0000000000000000 x14: 0000000000000000
[ 17.543652] x13: ffff000008d95db8 x12: 000000000000000d
[ 17.552780] x11: ffff000008d95d90 x10: 0000000000000b00
[ 17.561819] x9 : ffff000100d9bb90 x8 : ffff802fb89d6560
[ 17.570829] x7 : 0000000000000004 x6 : 00000004a1801d05
[ 17.579839] x5 : 0000000000000000 x4 : 0000000000000000
[ 17.588852] x3 : ffff802fb89d5a00 x2 : 0000000000000000
[ 17.597734] x1 : 0000000200000000 x0 : 0000000200000000
[ 17.606631] Process kworker/u130:0 (pid: 95, stack limit = 0x(____ptrval____))
[ 17.617438] Call trace:
[ 17.623349] __mutex_lock.isra.1+0x74/0x540
[ 17.630927] __mutex_lock_slowpath+0x24/0x30
[ 17.638602] mutex_lock+0x50/0x60
[ 17.645295] drain_workqueue+0x34/0x198
[ 17.652623] __sas_drain_work+0x7c/0x168
[ 17.659903] sas_drain_work+0x60/0x68
[ 17.666947] hisi_sas_scan_finished+0x30/0x40 [hisi_sas_main]
[ 17.676129] do_scsi_scan_host+0x70/0xb0
[ 17.683534] do_scan_async+0x20/0x228
[ 17.690586] async_run_entry_fn+0x4c/0x1d0
[ 17.697997] process_one_work+0x1b4/0x3f8
[ 17.705296] worker_thread+0x54/0x470
Every time the call trace is not the same, but the overwrite address
is always the same:
Unable to handle kernel paging request at virtual address 0000000200000040
The root cause is, when write the reg XGMAC_MAC_TX_LF_RF_CONTROL_REG,
didn't use the io_base offset.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit acb1ce15a61154aa501891d67ebf79bc9ea26818 ]
When the HNS driver loaded, always have an error print:
"netif_napi_add() called with weight 256"
This is because the kernel checks the NAPI polling weights
requested by drivers and it prints an error message if a driver
requests a weight bigger than 64.
So use NAPI_POLL_WEIGHT to fix it.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit 3a39a12ad364a9acd1038ba8da67cd8430f30de4 ]
This patch is trying to fix the issue due to:
[27237.844750] BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x708/0xa18[hns_enet_drv]
After hnae_queue_xmit() in hns_nic_net_xmit_hw(), can be
interrupted by interruptions, and than call hns_nic_tx_poll_one()
to handle the new packets, and free the skb. So, when turn back to
hns_nic_net_xmit_hw(), calling skb->len will cause use-after-free.
This patch update tx ring statistics in hns_nic_tx_poll_one() to
fix the bug.
Signed-off-by: Liubin Shu <shuliubin@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit 057a0c5642a2ff2db7c421cdcde34294a23bf37b ]
This is log is harmful as it can trigger multiple times per packet. Delete
it.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit 8ac0c24fe1c256af6644caf3d311029440ec2fbd ]
Packets without the last descriptor set should be dropped early. If we
receive a frame larger than the DMA buffer, the HW will continue using the
next descriptor. Driver mistakes these as individual frames, and sometimes
a truncated frame (without the LD set) may look like a valid packet.
This fixes a strange issue where the system replies to 4098-byte ping
although the MTU/DMA buffer size is set to 4096, and yet at the same
time it's logging an oversized packet.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit 1b746ce8b397e58f9e40ce5c63b7198de6930482 ]
If we have error bits set, the discard_frame status will get overwritten
by checksum bit checks, which might set the status back to good one.
Fix by checking the COE status only if the frame is good.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit 07b3975352374c3f5ebb4a42ef0b253fe370542d ]
Currently, if we drop a packet, we exit from NAPI loop before the budget
is consumed. In some situations this will make the RX processing stall
e.g. when flood pinging the system with oversized packets, as the
errorneous packets are not dropped efficiently.
If we drop a packet, we should just continue to the next one as long as
the budget allows.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit 972c9be784e077bc56472c78243e0326e525b689 ]
Ratelimit RX error logs.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit 583e6361414903c5206258a30e5bd88cb03c0254 ]
We always program the maximum DMA buffer size into the receive descriptor,
although the allocated size may be less. E.g. with the default MTU size
we allocate only 1536 bytes. If somebody sends us a bigger frame, then
memory may get corrupted.
Fix by using exact buffer sizes.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit eca4a928585ac08147e5cc8e2111ecbc6279ee31 ]
Traditionally, the PF (Physical Function) which resides on vport 0 was
the E-switch manager. Since the ECPF (Embedded CPU Physical Function),
which resides on vport 0xfffe, was introduced as the E-Switch manager,
the assumption that the E-switch manager is on vport 0 is incorrect.
Since the eswitch code already uses the actual vport value, all we
need is to always set other_vport=1.
Signed-off-by: Omri Kahalon <omrik@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit 5c1d260ed10cf08dd7a0299c103ad0a3f9a9f7a1 ]
The esw offloads structures share a union with the legacy mode structs.
Reset the offloads struct to zero in init to protect from null
assumptions made by the legacy mode code.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit 669efc76b317b3aa550ffbf0b79d064cb00a5f96 ]
Currently, the rules for configuring search paths in Kbuild have
changed, this will lead some erros when compiling hns3 with the
following command:
make O=DIR M=drivers/net/ethernet/hisilicon/hns3
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c:11:10:
fatal error: hnae3.h: No such file or directory
This patch fix it by adding $(srctree)/ prefix to the serach paths.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit f669d24f3dd00beab452c0fc9257f6a942ffca9b ]
The current check for WoL on i40e is broken. Code comment says only
magic packet is supported, so only check for that.
Fixes: 540a152da762 (i40e/ixgbe/igb: fail on new WoL flag setting WAKE_MAGICSECURE)
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit 7ec52b9df7d7472240fa96223185894b1897aeb0 ]
The ixgbe ignores errors returned from mdiobus_register() and leaves
adapter->mii_bus non-NULL and MDIO bus state as MDIOBUS_ALLOCATED.
This triggers a BUG from mdiobus_unregister() during ixgbe_remove() call.
Fixes: 8fa10ef01260 ("ixgbe: register a mdiobus")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit dabb8338be533c18f50255cf39ff4f66d4dabdbe ]
The runtime_suspend device callbacks are not supposed to save
configuration state or change the power state. Commit fb29f76cc566
("igb: Fix an issue that PME is not enabled during runtime suspend")
changed the driver to not save configuration state during runtime
suspend, however the driver callback still put the device into a
low-power state. This causes a warning in the pci pm core and results in
pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend.
Fix this by not changing the power state either, leaving that to pci pm
core, and make the same change for suspend callback as well.
Also move a couple of defines into the appropriate header file instead
of inline in the .c file.
Fixes: fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend")
Signed-off-by: Arvind Sankar <niveditas98@gmail.com>
Reviewed-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit b3ccbbce1e455b8454d3935eb9ae0a5f18939e24 ]
Commit 0ac30ce43323 ("i40e: fix up 32 bit timespec references",
2017-07-26) claims to be cleaning up references to 32-bit timespecs.
The actual contents of the commit make no sense, as it converts a call
to timespec64_add into timespec64_add_ns. This would seem ok, if (a) the
change was documented in the commit message, and (b) timespec64_add_ns
supported negative numbers.
timespec64_add_ns doesn't work with signed deltas, because the
implementation is based around iter_div_u64_rem. This change resulted in
a regression where i40e_ptp_adjtime would interpret small negative
adjustments as large positive additions, resulting in incorrect
behavior.
This commit doesn't appear to fix anything, is not well explained, and
introduces a bug, so lets just revert it.
Reverts: 0ac30ce43323 ("i40e: fix up 32 bit timespec references", 2017-07-26)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit 0b397b17a4120cb80f7bf89eb30587b3dd9b0d1d ]
In bnxt_rx_pkt(), if the driver encounters BD errors, it will recycle
the buffers and jump to the end where the uninitailized variable "len"
is referenced. Fix it by adding a new jump label that will skip
the length update. This is the most correct fix since the length
may not be valid when we get this type of error.
Fixes: 6a8788f25625 ("bnxt_en: add support for software dynamic interrupt moderation")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3f93cd3f098e284c851acb89265ebe35b994a5c8 ]
In an earlier commit that fixes the number of stats contexts to
reserve for the RDMA driver, we added a function parameter to pass in
the number of stats contexts to all the relevant functions. The passed
in parameter should have been used to set the enables field of the
firmware message.
Fixes: 780baad44f0f ("bnxt_en: Reserve 1 stat_ctx for RDMA driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ad361adf0d08f1135f3845c6b3a36be7cc0bfda5 ]
If driver determines that extended TX port statistics are not supported
or allocation of the data structure fails, make sure to pass 0 TX stats
size to firmware to disable it. The firmware returned TX stats size should
also be set to 0 for consistency. This will prevent
bnxt_get_ethtool_stats() from accessing the NULL TX stats pointer in
case there is mismatch between firmware and driver.
Fixes: 36e53349b60b ("bnxt_en: Add additional extended port statistics.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1f83391bd6fc48f92f627b0ec0bce686d100c6a5 ]
If we encounter errors during open and proceed to clean up,
bnxt_hwrm_ring_free() may crash if the rings we try to free have never
been allocated. bnxt_cp_ring_for_rx() or bnxt_cp_ring_for_tx()
may reference pointers that have not been allocated.
Fix it by checking for valid fw_ring_id first before calling
bnxt_cp_ring_for_rx() or bnxt_cp_ring_for_tx().
Fixes: 2c61d2117ecb ("bnxt_en: Add helper functions to get firmware CP ring ID.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f9099d611449836a51a65f40ea7dc9cb5f2f665e ]
In the bnxt_init_one() error path, short FW command request memory
is not freed. This patch fixes it.
Fixes: e605db801bde ("bnxt_en: Support for Short Firmware Message")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b4e30e8e7ea1d1e35ffd64ca46f7d9a7f227b4bf ]
The driver builds a list of multicast addresses and sends it to the
firmware when the driver's ndo_set_rx_mode() is called. In rare
cases, the firmware can fail this call if internal resources to
add multicast addresses are exhausted. In that case, we should
try the call again by setting the ALL_MCAST flag which is more
guaranteed to succeed.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 75eac7b5f68b0a0671e795ac636457ee27cc11d8 ]
The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/net/ethernet/ti/netcp_ethss.c:3661:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function.
./drivers/net/ethernet/ti/netcp_ethss.c:3665:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Wingman Kwok <w-kwok2@ti.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit be693df3cf9dd113ff1d2c0d8150199efdba37f6 ]
The call to ehea_get_eth_dn returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/net/ethernet/ibm/ehea/ehea_main.c:3163:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3154, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Douglas Miller <dougmill@linux.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit fa3a419d2f674b431d38748cb58fb7da17ee8949 ]
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1624:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1569, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Anirudha Sarangi <anirudh@xilinx.com>
Cc: John Linn <John.Linn@xilinx.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|
|
[ Upstream commit cd5afa91f078c0787be0a62b5ef90301c00b0271 ]
Both PCLK and HCLK are "required" clocks according to macb devicetree
documentation. There is a chance that devm_clk_get doesn't return a
negative error but just a NULL clock structure instead. In such a case
the driver proceeds as usual and uses pclk value 0 to calculate MDC
divisor which is incorrect. Hence fix the same in clock initialization.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
|