aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/qlogic
AgeCommit message (Collapse)Author
2018-02-12qlcnic: fix deadlock bugJunxiao Bi
[ Upstream commit 233ac3891607f501f08879134d623b303838f478 ] The following soft lockup was caught. This is a deadlock caused by recusive locking. Process kworker/u40:1:28016 was holding spin lock "mbx->queue_lock" in qlcnic_83xx_mailbox_worker(), while a softirq came in and ask the same spin lock in qlcnic_83xx_enqueue_mbx_cmd(). This lock should be hold by disable bh.. [161846.962125] NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [kworker/u40:1:28016] [161846.962367] Modules linked in: tun ocfs2 xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn xenfs xen_privcmd autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc sunrpc 8021q mrp garp bridge stp llc bonding dm_round_robin dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 shpchp lpc_ich mfd_core ioatdma ipmi_devintf ipmi_si ipmi_msghandler sg ext4 jbd2 mbcache2 sr_mod cdrom sd_mod igb i2c_algo_bit i2c_core ahci libahci megaraid_sas ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel qla2xxx scsi_transport_fc qlcnic crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod [161846.962454] [161846.962460] CPU: 1 PID: 28016 Comm: kworker/u40:1 Not tainted 4.1.12-94.5.9.el6uek.x86_64 #2 [161846.962463] Hardware name: Oracle Corporation SUN SERVER X4-2L /ASSY,MB,X4-2L , BIOS 26050100 09/19/2017 [161846.962489] Workqueue: qlcnic_mailbox qlcnic_83xx_mailbox_worker [qlcnic] [161846.962493] task: ffff8801f2e34600 ti: ffff88004ca5c000 task.ti: ffff88004ca5c000 [161846.962496] RIP: e030:[<ffffffff810013aa>] [<ffffffff810013aa>] xen_hypercall_sched_op+0xa/0x20 [161846.962506] RSP: e02b:ffff880202e43388 EFLAGS: 00000206 [161846.962509] RAX: 0000000000000000 RBX: ffff8801f6996b70 RCX: ffffffff810013aa [161846.962511] RDX: ffff880202e433cc RSI: ffff880202e433b0 RDI: 0000000000000003 [161846.962513] RBP: ffff880202e433d0 R08: 0000000000000000 R09: ffff8801fe893200 [161846.962516] R10: ffff8801fe400538 R11: 0000000000000206 R12: ffff880202e4b000 [161846.962518] R13: 0000000000000050 R14: 0000000000000001 R15: 000000000000020d [161846.962528] FS: 0000000000000000(0000) GS:ffff880202e40000(0000) knlGS:ffff880202e40000 [161846.962531] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [161846.962533] CR2: 0000000002612640 CR3: 00000001bb796000 CR4: 0000000000042660 [161846.962536] Stack: [161846.962538] ffff880202e43608 0000000000000000 ffffffff813f0442 ffff880202e433b0 [161846.962543] 0000000000000000 ffff880202e433cc ffffffff00000001 0000000000000000 [161846.962547] 00000009813f03d6 ffff880202e433e0 ffffffff813f0460 ffff880202e43440 [161846.962552] Call Trace: [161846.962555] <IRQ> [161846.962565] [<ffffffff813f0442>] ? xen_poll_irq_timeout+0x42/0x50 [161846.962570] [<ffffffff813f0460>] xen_poll_irq+0x10/0x20 [161846.962578] [<ffffffff81014222>] xen_lock_spinning+0xe2/0x110 [161846.962583] [<ffffffff81013f01>] __raw_callee_save_xen_lock_spinning+0x11/0x20 [161846.962592] [<ffffffff816e5c57>] ? _raw_spin_lock+0x57/0x80 [161846.962609] [<ffffffffa028acfc>] qlcnic_83xx_enqueue_mbx_cmd+0x7c/0xe0 [qlcnic] [161846.962623] [<ffffffffa028e008>] qlcnic_83xx_issue_cmd+0x58/0x210 [qlcnic] [161846.962636] [<ffffffffa028caf2>] qlcnic_83xx_sre_macaddr_change+0x162/0x1d0 [qlcnic] [161846.962649] [<ffffffffa028cb8b>] qlcnic_83xx_change_l2_filter+0x2b/0x30 [qlcnic] [161846.962657] [<ffffffff8160248b>] ? __skb_flow_dissect+0x18b/0x650 [161846.962670] [<ffffffffa02856e5>] qlcnic_send_filter+0x205/0x250 [qlcnic] [161846.962682] [<ffffffffa0285c77>] qlcnic_xmit_frame+0x547/0x7b0 [qlcnic] [161846.962691] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962696] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962701] [<ffffffff81630112>] sch_direct_xmit+0x112/0x220 [161846.962706] [<ffffffff8160b80f>] __dev_queue_xmit+0x1df/0x5e0 [161846.962710] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962721] [<ffffffffa0575bd5>] bond_dev_queue_xmit+0x35/0x80 [bonding] [161846.962729] [<ffffffffa05769fb>] __bond_start_xmit+0x1cb/0x210 [bonding] [161846.962736] [<ffffffffa0576a71>] bond_start_xmit+0x31/0x60 [bonding] [161846.962740] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962745] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962749] [<ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0 [161846.962754] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962760] [<ffffffffa05cfa72>] vlan_dev_hard_start_xmit+0xb2/0x150 [8021q] [161846.962764] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962769] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962773] [<ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0 [161846.962777] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962789] [<ffffffffa05adf74>] br_dev_queue_push_xmit+0x54/0xa0 [bridge] [161846.962797] [<ffffffffa05ae4ff>] br_forward_finish+0x2f/0x90 [bridge] [161846.962807] [<ffffffff810b0dad>] ? ttwu_do_wakeup+0x1d/0x100 [161846.962811] [<ffffffff815f929b>] ? __alloc_skb+0x8b/0x1f0 [161846.962818] [<ffffffffa05ae04d>] __br_forward+0x8d/0x120 [bridge] [161846.962822] [<ffffffff815f613b>] ? __kmalloc_reserve+0x3b/0xa0 [161846.962829] [<ffffffff810be55e>] ? update_rq_runnable_avg+0xee/0x230 [161846.962836] [<ffffffffa05ae176>] br_forward+0x96/0xb0 [bridge] [161846.962845] [<ffffffffa05af85e>] br_handle_frame_finish+0x1ae/0x420 [bridge] [161846.962853] [<ffffffffa05afc4f>] br_handle_frame+0x17f/0x260 [bridge] [161846.962862] [<ffffffffa05afad0>] ? br_handle_frame_finish+0x420/0x420 [bridge] [161846.962867] [<ffffffff8160d057>] __netif_receive_skb_core+0x1f7/0x870 [161846.962872] [<ffffffff8160d6f2>] __netif_receive_skb+0x22/0x70 [161846.962877] [<ffffffff8160d913>] netif_receive_skb_internal+0x23/0x90 [161846.962884] [<ffffffffa07512ea>] ? xenvif_idx_release+0xea/0x100 [xen_netback] [161846.962889] [<ffffffff816e5a10>] ? _raw_spin_unlock_irqrestore+0x20/0x50 [161846.962893] [<ffffffff8160e624>] netif_receive_skb_sk+0x24/0x90 [161846.962899] [<ffffffffa075269a>] xenvif_tx_submit+0x2ca/0x3f0 [xen_netback] [161846.962906] [<ffffffffa0753f0c>] xenvif_tx_action+0x9c/0xd0 [xen_netback] [161846.962915] [<ffffffffa07567f5>] xenvif_poll+0x35/0x70 [xen_netback] [161846.962920] [<ffffffff8160e01b>] napi_poll+0xcb/0x1e0 [161846.962925] [<ffffffff8160e1c0>] net_rx_action+0x90/0x1c0 [161846.962931] [<ffffffff8108aaba>] __do_softirq+0x10a/0x350 [161846.962938] [<ffffffff8108ae75>] irq_exit+0x125/0x130 [161846.962943] [<ffffffff813f03a9>] xen_evtchn_do_upcall+0x39/0x50 [161846.962950] [<ffffffff816e7ffe>] xen_do_hypervisor_callback+0x1e/0x40 [161846.962952] <EOI> [161846.962959] [<ffffffff816e5c4a>] ? _raw_spin_lock+0x4a/0x80 [161846.962964] [<ffffffff816e5b1e>] ? _raw_spin_lock_irqsave+0x1e/0xa0 [161846.962978] [<ffffffffa028e279>] ? qlcnic_83xx_mailbox_worker+0xb9/0x2a0 [qlcnic] [161846.962991] [<ffffffff810a14e1>] ? process_one_work+0x151/0x4b0 [161846.962995] [<ffffffff8100c3f2>] ? check_events+0x12/0x20 [161846.963001] [<ffffffff810a1960>] ? worker_thread+0x120/0x480 [161846.963005] [<ffffffff816e187b>] ? __schedule+0x30b/0x890 [161846.963010] [<ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0 [161846.963015] [<ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0 [161846.963021] [<ffffffff810a6b3e>] ? kthread+0xce/0xf0 [161846.963025] [<ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70 [161846.963031] [<ffffffff816e6522>] ? ret_from_fork+0x42/0x70 [161846.963035] [<ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70 [161846.963037] Code: cc 51 41 53 b8 1c 00 00 00 0f 05 41 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 51 41 53 b8 1d 00 00 00 0f 05 <41> 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-24qed: Free reserved MR tidMichal Kalderon
A tid was allocated for reserved MR during initialization but not freed. This lead to an annoying output message during rdma unload flow. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24qed: Remove reserveration of dpi for kernelMichal Kalderon
Double reservation for kernel dedicated dpi was performed. Once in the core module and once in qedr. Remove the reservation from core. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16qed: Fix potential use-after-free in qed_spq_post()Roland Dreier
We need to check if p_ent->comp_mode is QED_SPQ_MODE_EBLOCK before calling qed_spq_add_entry(). The test is fine is the mode is EBLOCK, but if it isn't then qed_spq_add_entry() might kfree(p_ent). Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Revert regression inducing change to the IPSEC template resolver, from Steffen Klassert. 2) Peeloffs can cause the wrong sk to be waken up in SCTP, fix from Xin Long. 3) Min packet MTU size is wrong in cpsw driver, from Grygorii Strashko. 4) Fix build failure in netfilter ctnetlink, from Arnd Bergmann. 5) ISDN hisax driver checks pnp_irq() for errors incorrectly, from Arvind Yadav. 6) Fix fealnx driver build failure on MIPS, from Huacai Chen. 7) Fix into leak in SCTP, the scope_id of socket addresses is not always filled in. From Eric W. Biederman. 8) MTU inheritance between physical function and representor fix in nfp driver, from Dirk van der Merwe. 9) Fix memory leak in rsi driver, from Colin Ian King. 10) Fix expiration and generation ID handling of cached ipv4 redirect routes, from Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits) net: usb: hso.c: remove unneeded DRIVER_LICENSE #define ibmvnic: fix dma_mapping_error call ipvlan: NULL pointer dereference panic in ipvlan_port_destroy route: also update fnhe_genid when updating a route cache route: update fnhe_expires for redirect when the fnhe exists sctp: set frag_point in sctp_setsockopt_maxseg correctly rsi: fix memory leak on buf and usb_reg_buf net/netlabel: Add list_next_rcu() in rcu_dereference(). nfp: remove false positive offloads in flower vxlan nfp: register flower reprs for egress dev offload nfp: inherit the max_mtu from the PF netdev nfp: fix vlan receive MAC statistics typo nfp: fix flower offload metadata flag usage virto_net: remove empty file 'virtio_net.' net/sctp: Always set scope_id in sctp_inet6_skb_msgname fealnx: Fix building error on MIPS isdn: hisax: Fix pnp_irq's error checking for setup_teles3 isdn: hisax: Fix pnp_irq's error checking for setup_sedlbauer_isapnp isdn: hisax: Fix pnp_irq's error checking for setup_niccy isdn: hisax: Fix pnp_irq's error checking for setup_ix1micro ...
2017-11-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge updates from Andrew Morton: - a few misc bits - ocfs2 updates - almost all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits) memory hotplug: fix comments when adding section mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP mm: simplify nodemask printing mm,oom_reaper: remove pointless kthread_run() error check mm/page_ext.c: check if page_ext is not prepared writeback: remove unused function parameter mm: do not rely on preempt_count in print_vma_addr mm, sparse: do not swamp log with huge vmemmap allocation failures mm/hmm: remove redundant variable align_end mm/list_lru.c: mark expected switch fall-through mm/shmem.c: mark expected switch fall-through mm/page_alloc.c: broken deferred calculation mm: don't warn about allocations which stall for too long fs: fuse: account fuse_inode slab memory as reclaimable mm, page_alloc: fix potential false positive in __zone_watermark_ok mm: mlock: remove lru_add_drain_all() mm, sysctl: make NUMA stats configurable shmem: convert shmem_init_inodecache() to void Unify migrate_pages and move_pages access checks mm, pagevec: rename pagevec drained field ...
2017-11-15mm: remove __GFP_COLDMel Gorman
As the page free path makes no distinction between cache hot and cold pages, there is no real useful ordering of pages in the free list that allocation requests can take advantage of. Juding from the users of __GFP_COLD, it is likely that a number of them are the result of copying other sites instead of actually measuring the impact. Remove the __GFP_COLD parameter which simplifies a number of paths in the page allocator. This is potentially controversial but bear in mind that the size of the per-cpu pagelists versus modern cache sizes means that the whole per-cpu list can often fit in the L3 cache. Hence, there is only a potential benefit for microbenchmarks that alloc/free pages in a tight loop. It's even worse when THP is taken into account which has little or no chance of getting a cache-hot page as the per-cpu list is bypassed and the zeroing of multiple pages will thrash the cache anyway. The truncate microbenchmarks are not shown as this patch affects the allocation path and not the free path. A page fault microbenchmark was tested but it showed no sigificant difference which is not surprising given that the __GFP_COLD branches are a miniscule percentage of the fault path. Link: http://lkml.kernel.org/r/20171018075952.10627-9-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16qed: use kzalloc instead of kmalloc and memsetColin Ian King
Replace kmalloc followed by a memset with kzalloc Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Ariel Elior <aelior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-11qlge: remove duplicated assignment to mbcpColin Ian King
The assignment to mbcp is identical to the initiatialized value assigned to mbcp at declaration time a few lines earlier, hence we can remove the second redundant assignment. Cleans up clang warning: drivers/net/ethernet/qlogic/qlge/qlge_mpi.c:209:22: warning: Value stored to 'mbcp' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-05net: bpf: rename ndo_xdp to ndo_bpfJakub Kicinski
ndo_xdp is a control path callback for setting up XDP in the driver. We can reuse it for other forms of communication between the eBPF stack and the drivers. Rename the callback and associated structures and definitions. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19qed: Fix iWARP out of order flowMichal Kalderon
Out of order flow is not working for iWARP. This patch got cut out from initial series that added out of order support for iWARP. Make out of order code common for iWARP and iSCSI. Add new configuration option CONFIG_QED_OOO. Set by qedr and qedi Kconfigs. Fixes: d1abfd0b4ee2 ("qed: Add iWARP out of order support") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09qed: Add iWARP support for fpdu spanned over more than two tcp packetsMichal Kalderon
We continue to maintain a maximum of three buffers per fpdu, to ensure that there are enough buffers for additional unaligned mpa packets. To support this, if a fpdu is split over more than two tcp packets, we use an intermediate buffer to copy the data to the previous buffer, then we can release the data. We need an intermediate buffer as the initial buffer partial packet could be located at the end of the packet, not leaving room for additional data. This is a corner case, and will usually not be the case. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09qed: Add support for MPA header being split over two tcp packetsMichal Kalderon
There is a special case where an MPA header is split over to tcp packets, in this case we need to wait for the next packet to get the fpdu length. We use the incomplete_bytes to mark this fpdu as a "special" one which requires updating the length with the next packet Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09qed: Add support for freeing two ll2 buffers for corner casesMichal Kalderon
When posting a packet on the ll2 tx, we can provide a cookie that will be returned upon tx completion. This cookie is the ll2 iwarp buffer which is then reposted to the rx ring. Part of the unaligned mpa flow is determining when a buffer can be reposted. Each buffer needs to be sent only once as a cookie for on the tx ring. In packed fpdu case, only the last packet will be sent with the buffer, meaning we need to handle the case that a cookie can be NULL on tx complete. In addition, when a fpdu splits over two buffers, but there are no more fpdus on the second buffer, two buffers need to be provided as a cookie. To avoid changing the ll2 interface to provide two cookies, we introduce a piggy buf pointer, relevant for iWARP only, that holds a pointer to a second buffer that needs to be released during tx completion. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09qed: Add unaligned and packed packet processingMichal Kalderon
The fpdu data structure is preallocated per connection. Each connection stores the current status of the connection: either nothing pending, or there is a partial fpdu that is waiting for the rest of the fpdu (incomplete bytes != 0). The same structure is also used for splitting a packet when there are packed fpdus. The structure is initialized with all data required for sending the fpdu back to the FW. A fpdu will always be spanned across a maximum of 3 tx bds. One for the header, one for the partial fdpu received and one for the remainder (unaligned) packet. In case of packed fpdu's, two fragments are used, one for the header and one for the data. Corner cases are not handled in the patch for clarity, and will be added as a separate patch. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09qed: Add mpa buffer descriptors for storing and processing mpa fpdusMichal Kalderon
The mpa buff is a descriptor for iwarp ll2 buffers that contains additional information required for aligining fpdu's. In some cases, an additional packet will arrive which will complete the alignment of a fpdu, but we won't be able to post the fpdu due to insufficient place on the tx ring. In this case we can't loose the data and require storing it for later. Processing is therefore done in two places, during rx completion, where we initialize a mpa buffer descriptor and add it to the pending list, and during tx-completion, since we free up an entry in the tx chain we can process any pending mpa packets. The mpa buff descriptors are pre-allocated since we have to ensure that we won't reach a state where we can't store an incoming unaligned packet. All packets received on the ll2 MUST be processed by the driver at some stage. Since they are preallocated, we hold a free list. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09qed: Add ll2 connection for processing unaligned MPA packetsMichal Kalderon
This patch adds only the establishment and termination of the ll2 connection that handles unaligned MPA packets. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09qed: Add LL2 slowpath handlingMichal Kalderon
For iWARP unaligned MPA flow, a slowpath event of flushing an MPA connection that entered an unaligned state is required. The flush ramrod is received on the ll2 queue, and a pre-registered callback function is called to handle the flush event. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09qed: Add the source of a packet sent on an iWARP ll2 connectionMichal Kalderon
When a packet is sent back to iWARP FW via the tx ll2 connection the FW needs to know the source of the packet. Whether it is OOO or unaligned MPA related. Since OOO is implemented entirely inside the ll2 code (and shared with iSCSI), packets are marked as IN_ORDER inside the ll2 code. For unaligned mpa the value will be determined in the iWARP code and sent on the pkt->vlan field. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09qed: Fix initialization of ll2 offload featureMichal Kalderon
enable_ip_cksum, enable_l4_cksum, calc_ip_len were added in commit stated below but not passed through to FW. This was OK until now as it wasn't used, but is required for the iWARP unaligned flow Fixes:7c7973b2ae27 ("qed: LL2 to use packed information for tx") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09qed: Add ll2 option for dropping a tx packetMichal Kalderon
The option of sending a packet on the ll2 and dropping it exists in hardware and was not used until now, thus not exposed. The iWARP unaligned MPA flow requires this functionality for flushing the tx queue. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09qed: Add ll2 ability of opening a secondary queueMichal Kalderon
When more than one ll2 queue is opened ( that is not an OOO queue ) ll2 code does not have enough information to determine whether the queue is the main one or not, so a new field is added to the acquire input data to expose the control of determining whether the queue is the main queue or a secondary queue. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09qed: Add ll2 option to limit the number of bds per packetMichal Kalderon
iWARP uses 3 ll2 connections, the maximum number of bds is known during connection setup. This patch modifies the static array in the ll2_tx_packet descriptor to be a flexible array and significantlly reduces memory size. In addition, some redundant fields in the ll2_tx_packet were removed, which also contributed to decreasing the descriptor size. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-08qed: Delete redundant check on dcb_app priorityChristos Gkekas
dcb_app priority is unsigned thus checking whether it is less than zero is redundant. Signed-off-by: Christos Gkekas <chris.gekas@gmail.com> Acked-By: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05timer: Remove init_timer_deferrable() in favor of timer_setup()Kees Cook
This refactors the only users of init_timer_deferrable() to use the new timer_setup() and from_timer(). Removes definition of init_timer_deferrable(). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David S. Miller <davem@davemloft.net> # for networking parts Acked-by: Sebastian Reichel <sre@kernel.org> # for drivers/hsi parts Cc: linux-mips@linux-mips.org Cc: Petr Mladek <pmladek@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: linux1394-devel@lists.sourceforge.net Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: linux-s390@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ursula Braun <ubraun@linux.vnet.ibm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Harish Patil <harish.patil@cavium.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Manish Chopra <manish.chopra@cavium.com> Cc: Len Brown <len.brown@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-pm@vger.kernel.org Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Mark Gross <mark.gross@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: linux-watchdog@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-wireless@vger.kernel.org Cc: Sebastian Reichel <sre@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Michael Reed <mdr@sgi.com> Cc: netdev@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lkml.kernel.org/r/1507159627-127660-6-git-send-email-keescook@chromium.org
2017-09-26bpf: add meta pointer for direct accessDaniel Borkmann
This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26qed: iWARP - Add check for errors on a SYN packetMichal Kalderon
A SYN packet which arrives with errors from FW should be dropped. This required adding an additional field to the ll2 rx completion data. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26qed: Fix maximum number of CQs for iWARPMichal Kalderon
The maximum number of CQs supported is bound to the number of connections supported, which differs between RoCE and iWARP. This fixes a crash that occurred in iWARP when running 1000 sessions using perftest. Fixes: 67b40dccc45 ("qed: Implement iWARP initialization, teardown and qp operations") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26qed: Add iWARP out of order supportMichal Kalderon
iWARP requires OOO support which is already provided by the ll2 interface (until now was used only for iSCSI offload). The changes mostly include opening a ll2 dedicated connection for OOO and notifiying the FW about the handle id. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26qed: Add iWARP enablement supportMichal Kalderon
This patch is the last of the initial iWARP patch series. It adds the possiblity to actually detect iWARP from the device and enable it in the critical locations which basically make iWARP available. It wasn't submitted until now as iWARP hadn't been accepted into the rdma tree. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21drivers: net: qlogic: use setup_timer() helper.Allen Pais
Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15qed: remove unnecessary call to memsetHimanshu Jha
call to memset to assign 0 value immediately after allocating memory with kzalloc is unnecesaary as kzalloc allocates the memory filled with 0 value. Semantic patch used to resolve this issue: @@ expression e,e2; constant c; statement S; @@ e = kzalloc(e2, c); if(e == NULL) S - memset(e, 0, e2); Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Acked-by: Sudarsana Kalluru <sudarsana.kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01qlcnic: remove redundant zero check on retries counterColin Ian King
At the end of the do while loop the integer counter retries will always be zero and so the subsequent check to see if it is zero is always true and therefore redundant. Remove the redundant check and always return -EIO on this return path. Also unbreak the literal string in dev_err message to clean up a checkpatch warning. Detected by CoverityScan, CID#744279 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30qed: fix spelling mistake: "calescing" -> "coalescing"Colin Ian King
Trivial fix to spelling mistake in DP_NOTICE message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24qlge: avoid memcpy buffer overflowArnd Bergmann
gcc-8.0.0 (snapshot) points out that we copy a variable-length string into a fixed length field using memcpy() with the destination length, and that ends up copying whatever follows the string: inlined from 'ql_core_dump' at drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:1106:2: drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:708:2: error: 'memcpy' reading 15 bytes from a region of size 14 [-Werror=stringop-overflow=] memcpy(seg_hdr->description, desc, (sizeof(seg_hdr->description)) - 1); Changing it to use strncpy() will instead zero-pad the destination, which seems to be the right thing to do here. The bug is probably harmless, but it seems like a good idea to address it in stable kernels as well, if only for the purpose of building with gcc-8 without warnings. Fixes: a61f80261306 ("qlge: Add ethtool register dump function.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-08-21qlogic: make device_attribute constBhumika Goyal
Make these const as they are only passed as an argument to the function device_create_file and device_remove_file and the corresponding arguments are of type const. Done using Coccinelle Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18netxen: fix incorrect loop counter decrementColin Ian King
The loop counter k is currently being decremented from zero which is incorrect. Fix this by incrementing k instead Detected by CoverityScan, CID#401847 ("Infinite loop") Fixes: 83f18a557c6d ("netxen_nic: fw dump support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14qlge: fix duplicated code for different branchesGustavo A. R. Silva
Refactor code in order to avoid identical code for different branches. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The UDP offload conflict is dealt with by simply taking what is in net-next where we have removed all of the UFO handling code entirely. The TCP conflict was a case of local variables in a function being removed from both net and net-next. In netvsc we had an assignment right next to where a missing set of u64 stats sync object inits were added. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07qed: Fix a memory allocation failure test in 'qed_mcp_cmd_init()'Christophe Jaillet
We allocate 'p_info->mfw_mb_cur' and 'p_info->mfw_mb_shadow' but we check 'p_info->mfw_mb_addr' instead of 'p_info->mfw_mb_cur'. 'p_info->mfw_mb_addr' is never 0, because it is initiliazed a few lines above in 'qed_load_mcp_offsets()'. Update the test and check the result of the 2 'kzalloc()' instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03qlcnic: add const to bin_attribute structureBhumika Goyal
Add const to bin_attribute structure as it is only passed to the functions sysfs_{remove/create}_bin_file. The corresponding arguments are of type const, so declare the structure to be const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-27qed: Read per queue coalesce from hardwareRahul Verma
Retrieve the actual coalesce value from hardware for every Rx/Tx queue, instead of Rx/Tx coalesce value cached during set coalesce. Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-27qed: Add support for vf coalesce configuration.Rahul Verma
This patch add the ethtool support to set RX/Tx coalesce value to the VF associated Rx/Tx queues. Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-26 04:36:41 +0000