summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/netronome
AgeCommit message (Collapse)Author
2018-07-28nfp: flower: fix port metadata conversion bugJohn Hurley
Function nfp_flower_repr_get_type_and_port expects an enum nfp_repr_type return value but, if the repr type is unknown, returns a value of type enum nfp_flower_cmsg_port_type. This means that if FW encodes the port ID in a way the driver does not understand instead of dropping the frame driver may attribute it to a physical port (uplink) provided the port number is less than physical port count. Fix this and ensure a net_device of NULL is returned if the repr can not be determined. Fixes: 1025351a88a4 ("nfp: add flower app") Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-22nfp: flower: ensure dead neighbour entries are not offloadedJohn Hurley
Previously only the neighbour state was checked to decide if an offloaded entry should be removed. However, there can be situations when the entry is dead but still marked as valid. This can lead to dead entries not being removed from fw tables or even incorrect data being added. Check the entry dead bit before deciding if it should be added to or removed from fw neighbour tables. Fixes: 8e6a9046b66a ("nfp: flower vxlan neighbour offload") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-08Merge tag 'pci-v4.18-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Fix a use-after-free in the endpoint code (Dan Carpenter) - Stop defaulting CONFIG_PCIE_DW_PLAT_HOST to yes (Geert Uytterhoeven) - Fix an nfp regression caused by a change in how we limit the number of VFs we can enable (Jakub Kicinski) - Fix failure path cleanup issues in the new R-Car gen3 PHY support (Marek Vasut) - Fix leaks of OF nodes in faraday, xilinx-nwl, xilinx (Nicholas Mc Guire) * tag 'pci-v4.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: nfp: stop limiting VFs to 0 PCI/IOV: Reset total_VFs limit after detaching PF driver PCI: faraday: Add missing of_node_put() PCI: xilinx-nwl: Add missing of_node_put() PCI: xilinx: Add missing of_node_put() PCI: endpoint: Use after free in pci_epf_unregister_driver() PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes PCI: rcar: Clean up PHY init on failure PCI: rcar: Shut the PHY down in failpath
2018-07-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-07-01 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) A bpf_fib_lookup() helper fix to change the API before freeze to return an encoding of the FIB lookup result and return the nexthop device index in the params struct (instead of device index as return code that we had before), from David. 2) Various BPF JIT fixes to address syzkaller fallout, that is, do not reject progs when set_memory_*() fails since it could still be RO. Also arm32 JIT was not using bpf_jit_binary_lock_ro() API which was an issue, and a memory leak in s390 JIT found during review, from Daniel. 3) Multiple fixes for sockmap/hash to address most of the syzkaller triggered bugs. Usage with IPv6 was crashing, a GPF in bpf_tcp_close(), a missing sock_map_release() routine to hook up to callbacks, and a fix for an omitted bucket lock in sock_close(), from John. 4) Two bpftool fixes to remove duplicated error message on program load, and another one to close the libbpf object after program load. One additional fix for nfp driver's BPF offload to avoid stopping offload completely if replace of program failed, from Jakub. 5) Couple of BPF selftest fixes that bail out in some of the test scripts if the user does not have the right privileges, from Jeffrin. 6) Fixes in test_bpf for s390 when CONFIG_BPF_JIT_ALWAYS_ON is set where we need to set the flag that some of the test cases are expected to fail, from Kleber. 7) Fix to detangle BPF_LIRC_MODE2 dependency from CONFIG_CGROUP_BPF since it has no relation to it and lirc2 users often have configs without cgroups enabled and thus would not be able to use it, from Sean. 8) Fix a selftest failure in sockmap by removing a useless setrlimit() call that would set a too low limit where at the same time we are already including bpf_rlimit.h that does the job, from Yonghong. 9) Fix BPF selftest config with missing missing NET_SCHED, from Anders. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29nfp: stop limiting VFs to 0Jakub Kicinski
Before 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"), pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual functions". After 8d85a7a4f2c9, it means "we can't enable *any* VFs". That broke this scenario where nfp intends to remove any limit on the number of VFs that can be enabled: nfp_pci_probe nfp_pcie_sriov_read_nfd_limit nfp_rtsym_read_le("nfd_vf_cfg_max_vfs", &err) pci_sriov_set_totalvfs(pf->pdev, 0) # if FW didn't expose a limit ... # userspace writes N to sysfs "sriov_numvfs": sriov_numvfs_store pci_sriov_get_totalvfs # now returns 0 return -ERANGE Prior to 8d85a7a4f2c9, pci_sriov_get_totalvfs() returned TotalVFs, but it now returns 0. Remove the pci_sriov_set_totalvfs(pdev, 0) calls so we don't limit the number of VFs that can be enabled. Fixes: 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-27nfp: cast sizeof() to int when comparing with error codeChengguang Xu
sizeof() will return unsigned value so in the error check negative error code will be always larger than sizeof(). Fixes: a0d8e02c35ff ("nfp: add support for reading nffw info") Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-27nfp: reject binding to shared blocksJohn Hurley
TC shared blocks allow multiple qdiscs to be grouped together and filters shared between them. Currently the chains of filters attached to a block are only flushed when the block is removed. If a qdisc is removed from a block but the block still exists, flow del messages are not passed to the callback registered for that qdisc. For the NFP, this presents the possibility of rules still existing in hw when they should be removed. Prevent binding to shared blocks until the kernel can send per qdisc del messages when block unbinds occur. tcf_block_shared() was not used outside of the core until now, so also add an empty implementation for builds with CONFIG_NET_CLS=n. Fixes: 4861738775d7 ("net: sched: introduce shared filter blocks infrastructure") Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-27nfp: flower: fix mpls ether type detectionPieter Jansen van Vuuren
Previously it was not possible to distinguish between mpls ether types and other ether types. This leads to incorrect classification of offloaded filters that match on mpls ether type. For example the following two filters overlap: # tc filter add dev eth0 parent ffff: \ protocol 0x8847 flower \ action mirred egress redirect dev eth1 # tc filter add dev eth0 parent ffff: \ protocol 0x0800 flower \ action mirred egress redirect dev eth2 The driver now correctly includes the mac_mpls layer where HW stores mpls fields, when it detects an mpls ether type. It also sets the MPLS_Q bit to indicate that the filter should match mpls packets. Fixes: bb055c198d9b ("nfp: add mpls match offloading support") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-25nfp: bpf: don't stop offload if replace failedJakub Kicinski
Stopping offload completely if replace of program failed dates back to days of transparent offload. Back then we wanted to silently fall back to the in-driver processing. Today we mark programs for offload when they are loaded into the kernel, so the transparent offload is no longer a reality. Flags check in the driver will only allow replace of a driver program with another driver program or an offload program with another offload program. When driver program is replaced stopping offload is a no-op, because driver program isn't offloaded. When replacing offloaded program if the offload fails the entire operation will fail all the way back to user space and we should continue using the old program. IOW when replacing a driver program stopping offload is unnecessary and when replacing offloaded program - it's a bug, old program should continue to run. In practice this bug would mean that if offload operation was to fail (either due to FW communication error, kernel OOM or new program being offloaded but for a different netdev) driver would continue reporting that previous XDP program is offloaded but in fact no program will be loaded in hardware. The failure is fairly unlikely (found by inspection, when working on the code) but it's unpleasant. Backport note: even though the bug was introduced in commit cafa92ac2553 ("nfp: bpf: add support for XDP_FLAGS_HW_MODE"), this fix depends on commit 441a33031fe5 ("net: xdp: don't allow device-bound programs in driver mode"), so this fix is sufficient only in v4.15 or newer. Kernels v4.13.x and v4.14.x do need to stop offload if it was transparent/opportunistic, i.e. if XDP_FLAGS_HW_MODE was not set on running program. Fixes: cafa92ac2553 ("nfp: bpf: add support for XDP_FLAGS_HW_MODE") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Various netfilter fixlets from Pablo and the netfilter team. 2) Fix regression in IPVS caused by lack of PMTU exceptions on local routes in ipv6, from Julian Anastasov. 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia. 4) Don't crash on poll in TLS, from Daniel Borkmann. 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things including Avahi mDNS. From Bart Van Assche. 6) Missing of_node_put in qcom/emac driver, from Yue Haibing. 7) We lack checking of the TCP checking in one special case during SYN receive, from Frank van der Linden. 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg. 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman. 10) Must grab HW caps before doing quirk checks in stmmac driver, from Jose Abreu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) net: stmmac: Run HWIF Quirks after getting HW caps neighbour: skip NTF_EXT_LEARNED entries during forced gc net: cxgb3: add error handling for sysfs_create_group tls: fix waitall behavior in tls_sw_recvmsg tls: fix use-after-free in tls_push_record l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl() l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels mlxsw: spectrum_switchdev: Fix port_vlan refcounting mlxsw: spectrum_router: Align with new route replace logic mlxsw: spectrum_router: Allow appending to dev-only routes ipv6: Only emit append events for appended routes stmmac: added support for 802.1ad vlan stripping cfg80211: fix rcu in cfg80211_unregister_wdev mac80211: Move up init of TXQs mac80211_hwsim: fix module init error paths cfg80211: initialize sinfo in cfg80211_get_station nl80211: fix some kernel doc tag mistakes hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload rds: avoid unenecessary cong_update in loop transport l2tp: clean up stale tunnel or session in pppol2tp_connect's error path ...
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kvzalloc() -> kvcalloc()Kees Cook
The kvzalloc() function has a 2-factor argument form, kvcalloc(). This patch replaces cases of: kvzalloc(a * b, gfp) with: kvcalloc(a * b, gfp) as well as handling cases of: kvzalloc(a * b * c, gfp) with: kvzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kvcalloc(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kvzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kvzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kvzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kvzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(char) * COUNT + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kvzalloc + kvcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kvzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kvzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kvzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kvzalloc(C1 * C2 * C3, ...) | kvzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kvzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kvzalloc(sizeof(THING) * C2, ...) | kvzalloc(sizeof(TYPE) * C2, ...) | kvzalloc(C1 * C2 * C3, ...) | kvzalloc(C1 * C2, ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - (E1) * E2 + E1, E2 , ...) | - kvzalloc + kvcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kvzalloc + kvcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12nfp: flower: free dst_entry in route tablePieter Jansen van Vuuren
We need to release the refcnt on dst_entry in the route table, otherwise we will leak the route. Fixes: 8e6a9046b66a ("nfp: flower vxlan neighbour offload") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12nfp: remove phys_port_name on flower's vNICJakub Kicinski
.ndo_get_phys_port_name was recently extended to support multi-vNIC FWs. These are firmwares which can have more than one vNIC per PF without associated port (e.g. Adaptive Buffer Management FW), therefore we need a way of distinguishing the vNICs. Unfortunately, it's too late to make flower use the same naming. Flower users may depend on .ndo_get_phys_port_name returning -EOPNOTSUPP, for example the name udev gave the PF vNIC was just the bare PCI device-based name before the change, and will have 'nn0' appended after. To ensure flower's vNIC doesn't have phys_port_name attribute, add a flag to vNIC struct and set it in flower code. New projects will not set the flag adhere to the naming scheme from the start. Fixes: 51c1df83e35c ("nfp: assign vNIC id as phys_port_name of vNICs which are not ports") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12nfp: include all ring counters in interface statsJakub Kicinski
We are gathering software statistics on per-ring basis. .ndo_get_stats64 handler adds the rings up. Unfortunately we are currently only adding up active rings, which means that if user decreases the number of active rings the statistics from deactivated rings will no longer be counted and total interface statistics may go backwards. Always sum all possible rings, the stats are allocated statically for max number of rings, so we don't have to worry about them being removed. We could add the stats up when user changes the ring count, but it seems unnecessary.. Adding up inactive rings will be very quick since no datapath will be touching them. Fixes: 164d1e9e5d52 ("nfp: add support for ethtool .set_channels") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12nfp: don't pad strings in nfp_cpp_resource_find() to avoid gcc 8 warningJakub Kicinski
Once upon a time nfp_cpp_resource_find() took a name parameter, which could be any user-chosen string. Resources are identified by a CRC32 hash of a 8 byte string, so we had to pad user input with zeros to make sure CRC32 gave the correct result. Since then nfp_cpp_resource_find() was made to operate on allocated resources only (struct nfp_resource). We kzalloc those so there is no need to pad the strings and use memcmp. This avoids a GCC 8 stringop-truncation warning: In function ‘nfp_cpp_resource_find’, inlined from ‘nfp_resource_try_acquire’ at .../nfpcore/nfp_resource.c:153:8, inlined from ‘nfp_resource_acquire’ at .../nfpcore/nfp_resource.c:206:9: .../nfpcore/nfp_resource.c:108:2: warning: strncpy’ output may be truncated copying 8 bytes from a string of length 8 [-Wstringop-truncation] strncpy(name_pad, res->name, sizeof(name_pad)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05devlink: Add extack to reload and port_{un, }split operationsDavid Ahern
Add extack argument to reload, port_split and port_unsplit operations. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: report correct MQ statsJakub Kicinski
Report the stat diff to make sure MQ stats add up to child stats. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: multi-queue RED offloadJakub Kicinski
Add support for MQ offload and setting RED parameters on queue-by-queue basis. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: expose all PF queuesJakub Kicinski
Allocate the PF representor as multi-queue to allow setting the configuration per-queue. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: expose the internal stats in ethtoolJakub Kicinski
There is a handful of statistics exposing some internal details of the implementation. Expose those via ethtool. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: allow apps to add extra stats to portsJakub Kicinski
Allow nfp apps to add extra ethtool stats. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: report statistics from RED offloadJakub Kicinski
Report basic and extended RED statistics back to TC. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: add simple RED offloadJakub Kicinski
Offload simple RED configurations. For now support only DCTCP like scenarios where min and max are the same. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: add helpers for configuring queue marking levelsJakub Kicinski
Queue levels for simple ECN marking are stored in _abi_nfd_out_q_lvls_X symbol, where X is the PCIe PF id. Find out the location of that symbol and add helpers for modifying it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: enable advanced queuing on demandJakub Kicinski
ABM NIC FW has a cut-through mode where the PCIe queuing is bypassed, thus working like our standard NIC FWs. Use this mode by default and only enable queuing in switchdev mode where users can configure it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: prefix vNIC phys_port_name with 'n'Jakub Kicinski
Some drivers are using a bare number inside phys_port_name as VF id and OpenStack's regexps will pick it up. We can't use a bare number for your vNICs, prefix the names with 'n'. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: return -EOPNOTSUPP from .ndo_get_phys_port_name for VFsJakub Kicinski
After recent change we started returning 0 from ndo_get_phys_port_name for VFs. The name parameter for ndo_get_phys_port_name is not initialized by the stack so this can lead to a crash. We should have kept returning -EOPNOTSUPP in the first place. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24nfp: flower: compute link aggregation actionJohn Hurley
If the egress device of an offloaded rule is a LAG port, then encode the output port to the NFP with a LAG identifier and the offloaded group ID. A prelag action is also offloaded which must be the first action of the series (although may appear after other pre-actions - e.g. tunnels). This causes the FW to check that it has the necessary information to output to the requested LAG port. If it does not, the packet is sent to the kernel before any other actions are applied to it. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24nfp: flower: implement host cmsg handler for LAGJohn Hurley
Adds the control message handler to synchronize offloaded group config with that of the kernel. Such messages are sent from fw to driver and feature the following 3 flags: - Data: an attached cmsg could not be processed - store for retransmission - Xon: FW can accept new messages - retransmit any stored cmsgs - Sync: full sync requested so retransmit all kernel LAG group info Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24nfp: flower: monitor and offload LAG groupsJohn Hurley
Monitor LAG events via the NETDEV_CHANGEUPPER/NETDEV_CHANGELOWERSTATE notifiers to maintain a list of offloadable groups. Sync these groups with HW via a delayed workqueue to prevent excessive re-configuration. When the workqueue is triggered it may generate multiple control messages for different groups. These messages are linked via a batch ID and flags to indicate a new batch and the end of a batch. Update private data in each repr to track their LAG lower state flags. The state of a repr is used to determine the active netdevs that can be offloaded. For example, in active-backup mode, we only offload the netdev currently active. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24nfp: flower: add per repr private data for LAG offloadJohn Hurley
Add a bitmap to each flower repr to track its state if it is enslaved by a bond. This LAG state may be different to the port state - for example, the port may be up but LAG state may be down due to the selection in an active/backup bond. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24nfp: flower: check for/turn on LAG support in firmwareJohn Hurley
Check if the fw contains the _abi_flower_balance_sync_enable symbol. If it does then write a 1 to this indicating that the driver is willing to receive NIC to kernel LAG related control messages. If the write is successful, update the list of extra features supported by the fw and add a stub to accept LAG cmsgs. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24nfp: nfpcore: add rtsym writing functionJohn Hurley
Add an rtsym API function that combines the lookup of a symbol and the writing of a value to it. Values can be written as unsigned 32 or 64 bits. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24nfp: add ndo_set_mac_address for representorsJohn Hurley
Adding a netdev to a bond requires that its mac address can be modified. The default eth_mac_addr is sufficient to satisfy this requirement. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2018-05-24 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Björn Töpel cleans up AF_XDP (removes rebind, explicit cache alignment from uapi, etc). 2) David Ahern adds mtu checks to bpf_ipv{4,6}_fib_lookup() helpers. 3) Jesper Dangaard Brouer adds bulking support to ndo_xdp_xmit. 4) Jiong Wang adds support for indirect and arithmetic shifts to NFP 5) Martin KaFai Lau cleans up BTF uapi and makes the btf_header extensible. 6) Mathieu Xhonneux adds an End.BPF action to seg6local with BPF helpers allowing to edit/grow/shrink a SRH and apply on a packet generic SRv6 actions. 7) Sandipan Das adds support for bpf2bpf function calls in ppc64 JIT. 8) Yonghong Song adds BPF_TASK_FD_QUERY command for introspection of tracing events. 9) other misc fixes from Gustavo A. R. Silva, Sirio Balmelli, John Fastabend, and Magnus Karlsson ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nfp: assign vNIC id as phys_port_name of vNICs which are not portsJakub Kicinski
When NFP is modelled as a switch we assign phys_port_name to respective port(representor )s: vNIC0 - | - PF port (pf%d) MAC/PHY (p%d[s%d]) - |E== In most cases there is only one vNIC for communication with the switch. If there is more than one we need to be able to identify them. Use %d as phys_port_name of the vNICs. We don't have to pass ID to nfp_net_debugfs_vnic_add() separately any more. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nfp: use split in naming of PCIe PF portsJakub Kicinski
PCI PFs can host more than one logical endpoint. In NFP terms this means having more than one vNIC for PCIe PF. The vNICs are usually corresponding 1:1 to Ethernet ports. In core NIC we use the legacy idea of vNIC *being* the Ethernet port, hence netdevs put pX(sY) in their phys_port_name, like Ethernet ports would. When ASIC ports are fully represented we need to be able to name different PCIe PF ports, too. Use a scheme similar to Ethernet ports - pfXsY, for PCIe PF number X, sub-port Y. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nfp: abm: force Ethternet port upJakub Kicinski
Current control firmware does not cater too well to multi-host applications. There is no way to check which hosts are up or otherwise negotiate what the state of the external port (the Ethernet port) should be. Make sure the link is up when driver loads, and don't take it down when Ethernet port netdev is closed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nfp: abm: spawn port netdevsJakub Kicinski
To configure buffering points we need full set of netdevs: ASIC user netdev -- | -- PCIe port MAC port -- | -- Configuring egrees qdiscs on user netdev configures standard Linux TC software qdiscs, configuring PCIe port qdiscs will provide a way of setting ASIC queuing parameters for PCIe block. MAC port netdev egress qdiscs correspond to ASIC MAC Traffic Manager block. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nfp: add devlink_eswitch_mode_set callbackJakub Kicinski
Our previous apps all assumed to use only one eswitch mode (legacy or switchdev) without the ability to change it. ABM NIC will want to support the switch so plumb devlink_eswitch_mode_set through. The devlink_eswitch_mode_set is expected to spawn representors and potentially devlink ports so it's called under big devlink lock and pf->lock. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nfp: add app pointer to port representorsJakub Kicinski
nfp_apps can currently associate their structures with vNICs but not representors. Add app priv pointer to representors as well. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nfp: abm: create project-specific vNIC structureJakub Kicinski
ABM NIC requires more complex vNIC handling, allocate per-vNIC structure. Find out RX queue base and PCI PF id. There will be multiple PFs sharing the same MAC port, therefore the MAC address assigned to the vNIC must be looked up in the HWInfo database. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nfp: abm: add initial active buffer management NIC skeletonJakub Kicinski
Add a very rudimentary active buffer management NIC support. For now it's like a core NIC without SR-IOV support. Next commits will extend its functionality. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nfp: core: allow 4-byte aligned accesses to Memory UnitsJakub Kicinski
Current code doesn't enforce length requirements on 32bit accesses with action NFP_CPP_ACTION_RW to memory units, but if the access is only aligned to 4 bytes as well we will fall into the explicit access case and error out. Such accesses are correct, allow them by lowering the width earlier. While at it use a switch statement to improve readability. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nfp: add shared buffer configurationJakub Kicinski
Allow app FW to advertise its shared buffer pool information. Use the per-PF mailbox to configure them from devlink. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nfp: add support for per-PCI PF mailboxJakub Kicinski
When working with devlink-related functionality for locking reasons it's easier to create a new mailbox per-PCI PF device than try to use one of the netdev/vNIC mailboxes. Define new mailbox structure and resolve its symbol during probe. For forward compatibility allow silent truncation of mailbox command data. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nfp: move rtsym helpers to pf codeJakub Kicinski
nfp_net_pf_rtsym_read_optional() and nfp_net_pf_map_rtsym() are not really related to networking code. Move them to the PF code and remove the net from their names. They will soon be needed by code outside of nfp_net_main.c anyway. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
S390 bpf_jit.S is removed in net-next and had changes in 'net', since that code isn't used any more take the removal. TLS data structures split the TX and RX components in 'net-next', put the new struct members from the bug fix in 'net' into the RX part. The 'net-next' tree had some reworking of how the ERSPAN code works in the GRE tunneling code, overlapping with a one-line headroom calculation fix in 'net'. Overlapping changes in __sock_map_ctx_update_elem(), keep the bits that read the prog members via READ_ONCE() into local variables before using them. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19devlink: extend attrs_set for setting port flavoursJiri Pirko
Devlink ports can have specific flavour according to the purpose of use. This patch extend attrs_set so the driver can say which flavour port has. Initial flavours are: physical, cpu, dsa User can query this to see right away what is the purpose of each port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-02 06:20:23 +0000