aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c
AgeCommit message (Collapse)Author
2020-09-21net/mlx5e: Use synchronize_rcu to sync with NAPIMaxim Mikityanskiy
As described in the previous commit, napi_synchronize doesn't quite fit the purpose when we just need to wait until the currently running NAPI quits. Its implementation waits until NAPI is not running by polling and waiting for 1ms in between. In cases where we need to deactivate one queue (e.g., recovery flows) or where we deactivate them one-by-one (deactivate channel flow), we may get stuck in napi_synchronize forever if other queues keep NAPI active, causing a soft lockup. Depending on kernel configuration (CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC), it may result in a kernel panic. To fix the issue, use synchronize_rcu to wait for NAPI to quit, and wrap the whole NAPI in rcu_read_lock. Fixes: acc6c5953af1 ("net/mlx5e: Split open/close channels to stages") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5e: Use indirect call wrappers for RX post WQEs functionsTariq Toukan
Use the indirect call wrapper API macros for declaration and scope of the RX post WQEs functions. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-27net/mlx5e: Turn XSK ICOSQ into a general asynchronous oneTariq Toukan
There is an upcoming demand (in downstream patches) for an ICOSQ to be populated out of the NAPI context, asynchronously. There is already an existing one serving XSK-related use case. In this patch, promote this ICOSQ to serve as general async ICOSQ, to be used for XSK and non-XSK flows. As part of this, the reg_umr bit of the SQ context is now set (if capable), as the general async ICOSQ should support possible posts of UMR WQEs. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-09net/mlx5e: Enhance ICOSQ WQE info fieldsTariq Toukan
The same WQE opcode might be used in different ICOSQ flows and WQE types. To have a better distinguishability, replace it with an enum that better indicates the WQE type and flow it is used for. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-09net/mlx5e: Use struct assignment for WQE info updatesTariq Toukan
Struct assignment looks more clean, and implies resetting the not assigned fields to zero, instead of holding values from older ring cycles. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-30net/mlx5e: Rename ICOSQ WQE info struct and fieldMaxim Mikityanskiy
Structs mlx5e_txqsq and mlx5e_xdpsq contain wqe_info arrays to store supplementary information corresponding to WQEs in the queue. Struct mlx5e_icosq also has such an array, but it's called differently - ico_wqe. This patch renames it to unify with the other SQs. In addition, rename the struct to emphasize its specific usage. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-20net/mlx5e: Don't trigger IRQ multiple times on XSK wakeup to avoid WQ overrunsMaxim Mikityanskiy
XSK wakeup function triggers NAPI by posting a NOP WQE to a special XSK ICOSQ. When the application floods the driver with wakeup requests by calling sendto() in a certain pattern that ends up in mlx5e_trigger_irq, the XSK ICOSQ may overflow. Multiple NOPs are not required and won't accelerate the process, so avoid posting a second NOP if there is one already on the way. This way we also avoid increasing the queue size (which might not help anyway). Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-24net/mlx5e: Enhance ICOSQ WQE info fieldsAya Levin
Add number of WQEBBs (WQE's Basic Block) to WQE info struct. Set the number of WQEBBs on WQE post, and increment the consumer counter (cc) on completion. In case of error completions, the cc was mistakenly not incremented, keeping a gap between cc and pc (producer counter). This failed the recovery flow on the ICOSQ from a CQE error which timed-out waiting for the cc and pc to meet. Fixes: be5323c8379f ("net/mlx5e: Report and recover from CQE error on ICOSQ") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-25net/mlx5e: RX, Use indirect calls wrapper for posting descriptorsTariq Toukan
We can avoid an indirect call per NAPI cycle wrapping the RX descriptors posting call with the appropriate helper. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-17net/mlx5e: Add AF_XDP need_wakeup supportMaxim Mikityanskiy
This commit adds support for the new need_wakeup feature of AF_XDP. The applications can opt-in by using the XDP_USE_NEED_WAKEUP bind() flag. When this feature is enabled, some behavior changes: RX side: If the Fill Ring is empty, instead of busy-polling, set the flag to tell the application to kick the driver when it refills the Fill Ring. TX side: If there are pending completions or packets queued for transmission, set the flag to tell the application that it can skip the sendto() syscall and save time. The performance testing was performed on a machine with the following configuration: - 24 cores of Intel Xeon E5-2620 v3 @ 2.40 GHz - Mellanox ConnectX-5 Ex with 100 Gbit/s link The results with retpoline disabled: | without need_wakeup | with need_wakeup | |----------------------|----------------------| | one core | two cores | one core | two cores | -------|----------|-----------|----------|-----------| txonly | 20.1 | 33.5 | 29.0 | 34.2 | rxdrop | 0.065 | 14.1 | 12.0 | 14.1 | l2fwd | 0.032 | 7.3 | 6.6 | 7.2 | "One core" means the application and NAPI run on the same core. "Two cores" means they are pinned to different cores. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-17net/mlx5e: Move the SW XSK code from NAPI poll to a separate functionMaxim Mikityanskiy
Two XSK tasks are performed during NAPI polling, that are not bound to hardware interrupts: TXing packets and polling for frames in the Fill Ring. They are special in a way that the hardware doesn't know about these tasks, so it doesn't trigger interrupts if there is still some work to be done, it's our driver's responsibility to ensure NAPI will be rescheduled if needed. Create a new function to handle these tasks and move the corresponding code from mlx5e_napi_poll to the new function to improve modularity and prepare for the changes in the following patch. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-25linux/dim: Fix overflow in dim calculationYamin Friedman
While using net_dim, a dim_sample was used without ever initializing the comps value. Added use of DIV_ROUND_DOWN_ULL() to prevent potential overflow, it should not be a problem to save the final result in an int because after the division by epms the value should not be larger than a few thousand. [ 1040.127124] UBSAN: Undefined behaviour in lib/dim/dim.c:78:23 [ 1040.130118] signed integer overflow: [ 1040.131643] 134718714 * 100 cannot be represented in type 'int' Fixes: 398c2b05bbee ("linux/dim: Add completions count to dim_sample") Signed-off-by: Yamin Friedman <yaminf@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05Merge tag 'mlx5-updates-2019-07-04-v2' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-update-2019-07-04 This series adds mlx5 support for devlink fw versions query. 1) Implement the required low level firmware commands 2) Implement the devlink knobs and callbacks for fw versions query. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-04Merge branch 'mlx5-next' of ↵Saeed Mahameed
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Misc updates from mlx5-next branch: 1) Add the required HW definitions and structures for upcoming TLS support. 2) Add support for MCQI and MCQS hardware registers for fw version query. 3) Added hardware bits and structures definitions for sub-functions 4) Small code cleanup and improvement for PF pci driver. 5) Bluefield (ECPF) updates and refactoring for better E-Switch management on ECPF embedded CPU NIC: 5.1) Consolidate querying eswitch number of VFs 5.2) Register event handler at the correct E-Switch init stage 5.3) Setup PF's inline mode and vlan pop when the ECPF is the E-Swtich manager ( the host PF is basically a VF ). 5.4) Handle Vport UC address changes in switchdev mode. 6) Cleanup the rep and netdev reference when unloading IB rep. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> i# All conflicts fixed but you are still merging.
2019-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-07-03 The following pull-request contains BPF updates for your *net-next* tree. There is a minor merge conflict in mlx5 due to 8960b38932be ("linux/dim: Rename externally used net_dim members") which has been pulled into your tree in the meantime, but resolution seems not that bad ... getting current bpf-next out now before there's coming more on mlx5. ;) I'm Cc'ing Saeed just so he's aware of the resolution below: ** First conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c: <<<<<<< HEAD static int mlx5e_open_cq(struct mlx5e_channel *c, struct dim_cq_moder moder, struct mlx5e_cq_param *param, struct mlx5e_cq *cq) ======= int mlx5e_open_cq(struct mlx5e_channel *c, struct net_dim_cq_moder moder, struct mlx5e_cq_param *param, struct mlx5e_cq *cq) >>>>>>> e5a3e259ef239f443951d401db10db7d426c9497 Resolution is to take the second chunk and rename net_dim_cq_moder into dim_cq_moder. Also the signature for mlx5e_open_cq() in ... drivers/net/ethernet/mellanox/mlx5/core/en.h +977 ... and in mlx5e_open_xsk() ... drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c +64 ... needs the same rename from net_dim_cq_moder into dim_cq_moder. ** Second conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c: <<<<<<< HEAD int cpu = cpumask_first(mlx5_comp_irq_get_affinity_mask(priv->mdev, ix)); struct dim_cq_moder icocq_moder = {0, 0}; struct net_device *netdev = priv->netdev; struct mlx5e_channel *c; unsigned int irq; ======= struct net_dim_cq_moder icocq_moder = {0, 0}; >>>>>>> e5a3e259ef239f443951d401db10db7d426c9497 Take the second chunk and rename net_dim_cq_moder into dim_cq_moder as well. Let me know if you run into any issues. Anyway, the main changes are: 1) Long-awaited AF_XDP support for mlx5e driver, from Maxim. 2) Addition of two new per-cgroup BPF hooks for getsockopt and setsockopt along with a new sockopt program type which allows more fine-grained pass/reject settings for containers. Also add a sock_ops callback that can be selectively enabled on a per-socket basis and is executed for every RTT to help tracking TCP statistics, both features from Stanislav. 3) Follow-up fix from loops in precision tracking which was not propagating precision marks and as a result verifier assumed that some branches were not taken and therefore wrongly removed as dead code, from Alexei. 4) Fix BPF cgroup release synchronization race which could lead to a double-free if a leaf's cgroup_bpf object is released and a new BPF program is attached to the one of ancestor cgroups in parallel, from Roman. 5) Support for bulking XDP_TX on veth devices which improves performance in some cases by around 9%, from Toshiaki. 6) Allow for lookups into BPF devmap and improve feedback when calling into bpf_redirect_map() as lookup is now performed right away in the helper itself, from Toke. 7) Add support for fq's Earliest Departure Time to the Host Bandwidth Manager (HBM) sample BPF program, from Lawrence. 8) Various cleanups and minor fixes all over the place from many others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03net/mlx5: Report EQE data upon CQ completionYishai Hadas
Report EQE data upon CQ completion to let upper layers use this data. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-06-27net/mlx5e: Add XSK zero-copy supportMaxim Mikityanskiy
This commit adds support for AF_XDP zero-copy RX and TX. We create a dedicated XSK RQ inside the channel, it means that two RQs are running simultaneously: one for non-XSK traffic and the other for XSK traffic. The regular and XSK RQs use a single ID namespace split into two halves: the lower half is regular RQs, and the upper half is XSK RQs. When any zero-copy AF_XDP socket is active, changing the number of channels is not allowed, because it would break to mapping between XSK RQ IDs and channels. XSK requires different page allocation and release routines. Such functions as mlx5e_{alloc,free}_rx_mpwqe and mlx5e_{get,put}_rx_frag are generic enough to be used for both regular and XSK RQs, and they use the mlx5e_page_{alloc,release} wrappers around the real allocation functions. Function pointers are not used to avoid losing the performance with retpolines. Wherever it's certain that the regular (non-XSK) page release function should be used, it's called directly. Only the stats that could be meaningful for XSK are exposed to the userspace. Those that don't take part in the XSK flow are not considered. Note that we don't wait for WQEs on the XSK RQ (unlike the regular RQ), because the newer xdpsock sample doesn't provide any Fill Ring entries at the setup stage. We create a dedicated XSK SQ in the channel. This separation has its advantages: 1. When the UMEM is closed, the XSK SQ can also be closed and stop receiving completions. If an existing SQ was used for XSK, it would continue receiving completions for the packets of the closed socket. If a new UMEM was opened at that point, it would start getting completions that don't belong to it. 2. Calculating statistics separately. When the userspace kicks the TX, the driver triggers a hardware interrupt by posting a NOP to a dedicated XSK ICO (internal control operations) SQ, in order to trigger NAPI on the right CPU core. This XSK ICO SQ is protected by a spinlock, as the userspace application may kick the TX from any core. Store the pointers to the UMEMs in the net device private context, independently from the kernel. This way the driver can distinguish between the zero-copy and non-zero-copy UMEMs. The kernel function xdp_get_umem_from_qid does not care about this difference, but the driver is only interested in zero-copy UMEMs, particularly, on the cleanup it determines whether to close the XSK RQ and SQ or not by looking at the presence of the UMEM. Use state_lock to protect the access to this area of UMEM pointers. LRO isn't compatible with XDP, but there may be active UMEMs while XDP is off. If this is the case, don't allow LRO to ensure XDP can be reenabled at any time. The validation of XSK parameters typically happens when XSK queues open. However, when the interface is down or the XDP program isn't set, it's still possible to have active AF_XDP sockets and even to open new, but the XSK queues will be closed. To cover these cases, perform the validation also in these flows: 1. A new UMEM is registered, but the XSK queues aren't going to be created due to missing XDP program or interface being down. 2. MTU changes while there are UMEMs registered. Having this early check prevents mlx5e_open_channels from failing at a later stage, where recovery is impossible and the application has no chance to handle the error, because it got the successful return value for an MTU change or XSK open operation. The performance testing was performed on a machine with the following configuration: - 24 cores of Intel Xeon E5-2620 v3 @ 2.40 GHz - Mellanox ConnectX-5 Ex with 100 Gbit/s link The results with retpoline disabled, single stream: txonly: 33.3 Mpps (21.5 Mpps with queue and app pinned to the same CPU) rxdrop: 12.2 Mpps l2fwd: 9.4 Mpps The results with retpoline enabled, single stream: txonly: 21.3 Mpps (14.1 Mpps with queue and app pinned to the same CPU) rxdrop: 9.9 Mpps l2fwd: 6.8 Mpps Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-27net/mlx5e: Share the XDP SQ for XDP_TX between RQsMaxim Mikityanskiy
Put the XDP SQ that is used for XDP_TX into the channel. It used to be a part of the RQ, but with introduction of AF_XDP there will be one more RQ that could share the same XDP SQ. This patch is a preparation for that change. Separate XDP_TX statistics per RQ were implemented in one of the previous patches. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-27net/mlx5e: Allow ICO SQ to be used by multiple RQsMaxim Mikityanskiy
Prepare to creation of the XSK RQ, which will require posting UMRs, too. The same ICO SQ will be used for both RQs and also to trigger interrupts by posting NOPs. UMR WQEs can't be reused any more. Optimization introduced in commit ab966d7e4ff98 ("net/mlx5e: RX, Recycle buffer of UMR WQEs") is reverted. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-25linux/dim: Rename externally used net_dim membersTal Gilboa
Removed 'net' prefix from functions and structs used by external drivers. Signed-off-by: Tal Gilboa <talgi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-25linux/dim: Rename net_dim_sample() to net_dim_update_sample()Tal Gilboa
In order to avoid confusion between the function and the similarly named struct. In preparation for removing the 'net' prefix from dim members. Signed-off-by: Tal Gilboa <talgi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-23net/mlx5e: Take HW interrupt trigger into a functionMaxim Mikityanskiy
mlx5e_trigger_irq posts a NOP to the ICO SQ just to trigger an IRQ and enter the NAPI poll on the right CPU according to the affinity. Use it in mlx5e_activate_rq. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: XDP, Change the XDP SQ redirect indicationTariq Toukan
Do not maintain an SQ state bit to indicate whether an XDP SQ serves redirect operations. Instead, rely on the fact that such an XDP SQ doesn't reside in an RQ instance, while the others do. This info is not known to the XDP SQ functions themselves, and they rely on their callers to distinguish between the cases. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-07-26net/mlx5e: Add support for XDP_REDIRECT in device-out sideTariq Toukan
Add implementation for the ndo_xdp_xmit callback. Dedicate a new set of XDP-SQ instances to satisfy the XDP_REDIRECT requests. These instances are totally separated from the existing XDP-SQ objects that satisfy local XDP_TX actions. Performance tests: xdp_redirect_map from ConnectX-5 to ConnectX-5. CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Packet-rate of 64B packets. Single queue: 7 Mpps. Multi queue: 55 Mpps. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-07-26net/mlx5e: Move XDP related code into new XDP filesTariq Toukan
Take XDP code out of the general EN header and RX file into new XDP files. Currently, XDP-SQ resides only within an RQ and used from a single flow (XDP_TX) triggered upon RX completions. In a downstream patch, additional type of XDP-SQ instances will be presented and used for the XDP_REDIRECT flow, totally unrelated to the RX context. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-28net/mlx5e: Add channel events counterTariq Toukan
Add per-channel and global ethtool counters for channel events. Each event indicates an interrupt on one of the channel's completion queues. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-28net/mlx5e: Add NAPI statisticsTariq Toukan
Add per-channel and global ethtool counters for NAPI. This helps us monitor and analyze performance in general. - ch[i]_poll: the number of times the channel's NAPI poll was invoked. - ch[i]_arm: the number of times the channel's NAPI poll completed and armed the completion queues. - ch[i]_aff_change: the number of times the channel's NAPI poll explicitly stopped execution on a cpu due to a change in affinity. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-25net/mlx5e: Avoid reset netdev stats on configuration changesEran Ben Elisha
Move all RQ, SQ and channel counters from the channel objects into the priv structure. With this change, counters will not be reset upon channel configuration changes. Channel's statistics for SQs which are associated with TCs higher than zero will be presented in ethtool -S, only for SQs which were opened at least once since the module was loaded (regardless of their open/close current status). This is done in order to decrease the total amount of statistics presented and calculated for the common out of box use (no QoS). mlx5e_channel_stats is a compound of CH,RQ,SQs stats in order to create locality for the NAPI when handling TX and RX of the same channel. Align the new statistics struct per ring to avoid several channels update to the same cache line at the same time. Packet rate was tested, no degradation sensed. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> CC: Qing Huang <qing.huang@oracle.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-14net/mlx5e: Remove MLX5E_TEST_BIT macroGal Pressman
MLX5E_TEST_BIT macro is the same as the already existent test_bit, remove it and replace all usages. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-04-24net/mlx5e: Enable adaptive-TX moderationTal Gilboa
Add support for adaptive TX moderation. This greatly reduces TX interrupt rate and increases bandwidth, mostly for TCP bandwidth over ARM architecture (below). There is a slight single stream TCP with very large message sizes degradation (x86). In this case if there's any moderation on transmitted packets the bandwidth would reduce due to hitting TCP output limit. Since this is a synthetic case, this is still worth doing. Performance improvement (ConnectX-4Lx 40GbE, ARM) TCP 64B bandwidth with 1-50 streams increased 6-35%. TCP 64B bandwidth with 100-500 streams increased 20-70%. Performance improvement (ConnectX-5 100GbE, x86) Bandwidth: increased up to 40% (1024B with 10s of streams). Interrupt rate: reduced up to 50% (1024B with 1000s of streams). Performance degradation (ConnectX-5 100GbE, x86) Bandwidth: up to 10% decrease single stream TCP (1MB message size from 51Gb/s to 47Gb/s). Signed-off-by: Tal Gilboa <talgi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10net/dim: use struct net_dim_sample as arg to net_dimAndy Gospodarek
Simplify the arguments net_dim() by formatting them into a struct net_dim_sample before calling the function. Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Suggested-by: Tal Gilboa <talgi@mellanox.com> Acked-by: Tal Gilboa <talgi@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10net/mlx5e: Change Mellanox references in DIM codeAndy Gospodarek
Change all appropriate mlx5_am* and MLX5_AM* references to net_dim and NET_DIM, respectively, in code that handles dynamic interrupt moderation. Also change all references from 'am' to 'dim' when used as local variables and add generic profile references. Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Acked-by: Tal Gilboa <talgi@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10net/mlx5e: Remove rq references in mlx5e_rx_amAndy Gospodarek
This makes mlx5e_am_sample more generic so that it can be called easily from a driver that does not use the same data structure to store these values in a single structure. Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Acked-by: Tal Gilboa <talgi@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net/mlx5e: Fix napi poll with zero budgetSaeed Mahameed
napi->poll can be called with budget 0, e.g. in netpoll scenarios where the caller only wants to poll TX rings (poll_one_napi@net/core/netpoll.c). The below commit changed RX polling from "while" loop to "do {} while", which caused to ignore the initial budget and handle at least one RX packet. This fixes the following warning: [ 2852.049194] mlx5e_napi_poll+0x0/0x260 [mlx5_core] exceeded budget in poll [ 2852.049195] ------------[ cut here ]------------ [ 2852.049195] WARNING: CPU: 0 PID: 25691 at net/core/netpoll.c:171 netpoll_poll_dev+0x18a/0x1a0 Fixes: 4b7dfc992514 ("net/mlx5e: Early-return on empty completion queues") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Reported-by: Martin KaFai Lau <kafai@fb.com> Tested-by: Martin KaFai Lau <kafai@fb.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-03net/mlx5e: Stop NAPI when irq balancer changes affinityTariq Toukan
NAPI context keeps rescheduling on same CPU as long as it's busy. This doesn't give the oppurtunity for changes in irq affinities to take effect. Fix that by calling napi_complete_done() upon a change in affinity. This would stop the NAPI and reschedule it on the new CPU. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-03net/mlx5e: Use kernel's mechanism to avoid missing NAPIsTariq Toukan
We used a channel state bit MLX5E_CHANNEL_NAPI_SCHED to make sure no NAPI is missed when a channel's napi_schedule() is called for completion events of the different channel's resources/rings while NAPI is currently running. Now, as similar mechanism is implemented in kernel, ("39e6c8208d7b net: solve a NAPI race"), we obsolete our own implementation and rely on the return value of napi_complete_done(). This patch removes a redundant overhead of atomic bit operations. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-03net/mlx5e: Type-specific optimizations for RX post WQEs functionTariq Toukan
Separate the RX post WQEs function of the different RQ types. This enables RQ type-specific optimizations in data-path. Poll the ICOSQ completion queue only for Striding RQ, and only when a UMR post completion could be possibly available. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-03net/mlx5e: Non-atomic indicator for ring enabled stateTariq Toukan
Rings enabled state change occurs in control path only, and is always followed by a napi_sychronize(), so that following NAPIs read the new value. This read does not need to be atomic. The RQ auto-moderation bit is not set/cleared in data-path. No need for atomic read, a regular read operation is sufficient. In RQ creation time as well, there's no multiple threads trying to access it yet, hence a regular read can be used. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-06-27net/mlx5: Make get_cqe routine not ethernet-specificIlan Tayari
Move mlx5e_get_cqe routine to wq.h and rename it to mlx5_cqwq_get_cqe. This allows it to be used by other CQ users outside of the ethernet driver code. A later patch in this patchset will make use of it from FPGA code for the FPGA high-speed connection. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-30net/mlx5e: Use u8 as ownership type in mlx5e_get_cqe()Tariq Toukan
CQE ownership indication is as small as a single bit. Use u8 to speedup the comparison. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-30net/mlx5e: Optimize poll ICOSQ completion queueTariq Toukan
UMR operations are more frequent and important. Check them first, and add a compiler branch predictor hint. According to current design, ICOSQ CQ can contain at most one pending CQE per napi. Poll function is optimized accordingly. Performance: Single-stream packet-rate tested with pktgen. Packets are dropped in tc level to zoom into driver data-path. Larger gain is expected for larger packet sizes, as BW is higher and UMR posts are more frequent. --------------------------------------------- packet size | before | after | gain | 64B | 4,092,370 | 4,113,306 | 0.5% | 1024B | 3,421,435 | 3,633,819 | 6.2% | Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-03-27net/mlx5e: CQ and RQ don't need priv pointerSaeed Mahameed
Remove mlx5e_priv pointer from CQ and RQ structs, it was needed only to access mdev pointer from priv pointer. Instead we now pass mdev where needed. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2017-03-24net/mlx5e: Different SQ typesSaeed Mahameed
Different SQ types (tx, xdp, ico) are growing apart, we separate them and remove unwanted parts in each one of them, to simplify data path and utilize data cache. Remove DB union from SQ structures since it is not needed anymore as we now have different SQ data type for each SQ. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net/mlx5e: Poll XDP TX CQ before RX CQSaeed Mahameed
Handle XDP TX completions before handling RX packets, to make sure more free space is available for XDP TX packets a moment before handling RX packets. Performance improvement: System: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz Test case Before Now improvement --------------------------------------------------------------- XDP Drop (1 core) 16.9Mpps 16.9Mpps No change XDP TX (1 core) 12Mpps 13Mpps 8% Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net/mlx5e: Move XDP SQ instance into RQSaeed Mahameed
To save many rq->channel->sq dereferences in fast-path. And rename it to xdpsq. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net/mlx5e: Move XDP completion functions to rx fileSaeed Mahameed
XDP code belongs to RX path, move mlx5e_poll_xdp_tx_cq and mlx5e_free_xdp_tx_descs to en_rx.c. Rename them to mlx5e_poll_xdpsq_cq and mlx5e_free_xdpsq_descs. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net/mlx5e: Use dma_rmb rather than rmb in CQE fetch routineSaeed Mahameed
Use dma_rmb in mlx5e_get_cqe rather than aggressive rmb (at least on some architectures), this should help improve the performance on such CPU archs where dma_rmb is optimized. Performance improvement: System: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz Test case Baseline Now improvement --------------------------------------------------------------- TX packets (24 threads) 45Mpps 50Mpps 11% TC stack Drop (1 core) 3.45Mpps 3.6Mpps 5% XDP Drop (1 core) 14Mpps 16.9Mpps 20% XDP TX (1 core) 10.4Mpps 12Mpps 15% Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net/mlx5e: Change the SQ/RQ operational state to positive logicMohamad Haj Yahia
When using the negative logic (i.e. FLUSH state), after the RQ/SQ reopen we will have a time interval that the RQ/SQ is not really ready and the state indicates that its not in FLUSH state because the initial SQ/RQ struct memory starts as zeros. Now we changed the state to indicate if the SQ/RQ is opened and we will set the READY state after finishing preparing all the SQ/RQ resources. Fixes: 6e8dd6d6f4bd ("net/mlx5e: Don't wait for SQ completions on close") Fixes: f2fde18c52a7 ("net/mlx5e: Don't wait for RQ completions on close") Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net/mlx5e: XDP TX forwarding supportSaeed Mahameed
Adding support for XDP_TX forwarding from xdp program. Using XDP, now user can loop packets out of the same port. We create a dedicated TX SQ for each channel that will serve XDP programs that return XDP_TX action to loop packets back to the wire directly from the channel RQ RX path. For that RX pages will now need to be mapped bi-directionally, and on XDP_TX action we will sync the page back to device then queue it into SQ for transmission. The XDP xmit frame function will report back to the RX path if the page was consumed (transmitted), if so, RX path will forget about that page as if it were released to the stack. Later on, on XDP TX completion, the page will be released back to the page cache. For simplicity this patch will hit a doorbell on every XDP TX packet. Next patch will introduce a xmit more like mechanism that will queue up more than one packet into SQ w/o notifying the hardware, once RX napi loop is done we will hit doorbell once for all XDP TX packets form the previous loop. This should drastically improve XDP TX performance. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-23 11:48:23 +0000