aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
AgeCommit message (Collapse)Author
2015-11-18mlx4: remove mlx4_en_low_latency_recv()Eric Dumazet
Busy polling can now be handled in generic NAPI poll infrastructure. This removes complexity and fast path overhead : mlx4 used two spin_lock()/spin_unlock() pair per napi->poll() call in mlx4_en_cq_lock_napi()/mlx4_en_cq_unlock_napi() Tested: Without busy polling : lpaa23:~# echo 0 >/proc/sys/net/core/busy_read lpaa24:~# echo 0 >/proc/sys/net/core/busy_read lpaa23:~# ./netperf -H lpaa24 -t TCP_RR MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to lpaa24.prod.google.com () port 0 AF_INET : first burst 0 Local /Remote Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 10.00 47330.78 With busy polling : lpaa23:~# echo 70 >/proc/sys/net/core/busy_read lpaa24:~# echo 70 >/proc/sys/net/core/busy_read lpaa23:~# ./netperf -H lpaa24 -t TCP_RR MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to lpaa24.prod.google.com () port 0 AF_INET : first burst 0 Local /Remote Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 10.00 97643.55 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18mlx4: mlx4_en_low_latency_recv() called with BH disabledEric Dumazet
mlx4_en_low_latency_recv() is called with BH disabled, as other ndo_busy_poll() methods. No need for spin_lock_bh()/spin_unlock_bh() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21net/mlx4_en: Implement mcast loopback prevention for ETH qpsMaor Gottlieb
Set the mcast loopback prevention bit in the QPC for ETH MLX QPs (not RSS QPs), when the firmware supports this feature. In addition, all rx ring QPs need to be updated in order not to enforce loopback checks. This prevents getting packets we sent both from the network stack and the HCA. Loopback prevention is done by comparing the counter indices of the sent and receiving QPs. If they're equal, packets aren't loopback-ed. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-27net/mlx4_en: Add support for hardware accelerated 802.1ad vlanHadar Hen Zion
To enable device support in accelerated 802.1ad vlan, the port capability "packet has vlan enable" (phv_en) should be set. Firmware won't work properly, in case phv_en is not set. The user can enable "phv_en" port capability with the new ethtool private flag phv-bit. The phv-bit private flag default value is OFF, users who are interested in 802.1ad hardware acceleration should turn ON the phv-bit private flag: $ ethtool --set-priv-flags eth1 phv-bit on Once the private flag is set, the device is ready for 802.1ad vlan acceleration. The user should also change the interface device features and turn on "tx-vlan-stag-hw-insert" which is off by default: $ ethtool -K eth1 tx-vlan-stag-hw-insert on "phv-bit" private flag setting is available only for Physical Functions(PF), the Virtual Function (VF) will be able to use the feature by setting "tx-vlan-stag-hw-insert" ethtool device feature only if the feature was enabled by the Hypervisor. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25net/mlx4_en: Wake TX queues only when there's enough roomIdo Shamay
Indication of a single completed packet, marked by txbbs_skipped being bigger then zero, in not enough in order to wake up a stopped TX queue. The completed packet may contain a single TXBB, while next packet to be sent (after the wake up) may have multiple TXBBs (LSO/TSO packets for example), causing overflow in queue followed by WQE corruption and TX queue timeout. Instead, wake the stopped queue only when there's enough room for the worst case (maximum sized WQE) packet that we should need to handle after the queue is opened again. Also created an helper routine - mlx4_en_is_tx_ring_full, which checks if the current TX ring is full or not. It provides better code readability and removes code duplication. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25net/mlx4_en: Release TX QP when destroying TX ringEran Ben Elisha
TX ring QP wasn't released at mlx4_en_destroy_tx_ring. Instead, the code used the deprecated base_tx_qpn field. Move TX QP release to mlx4_en_destroy_tx_ring and remove the base_tx_qpn field. Fixes: ddae0349fdb7 ('net/mlx4: Change QP allocation scheme') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15net/mlx4_en: Show PF own statistics via ethtoolEran Ben Elisha
Allow the user to observe the PF own statistics using ethtool with pf_ prefixed counter names. Those counters are the PF statistics out of the overall port statistics. Every PF QP is attached to a counter and the summary of those counters is the PF statistics. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15net/mlx4_core: Allocate default counter per portEran Ben Elisha
Default counter per port will be allocated at the mlx4 core driver load. Every QP opened by the Ethernet driver will be attached to the port's default counter. This is an infrastructure step to collect VF statistics from the PF. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx4: Add EQ poolMatan Barak
Previously, mlx4_en allocated EQs and used them exclusively. This affected RoCE performance, as applications which are events sensitive were limited to use only the legacy EQs. Change that by introducing an EQ pool. This pool is managed by mlx4_core. EQs are assigned to ports (when there are limited number of EQs, multiple ports could be assigned to the same EQs). An exception to this rule is the ASYNC EQ which handles various events. Legacy EQs are completely removed as all EQs could be shared. When a consumer (mlx4_ib/mlx4_en) requests an EQ, it asks for EQ serving on a specific port. The core driver calculates which EQ should be assigned to that request. Because IRQs are shared between IB and Ethernet modules, their names only include the PCI device BDF address. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30net/mlx4_en: Schedule napi when RX buffers allocation failsIdo Shamay
When system is out of memory, refilling of RX buffers fails while the driver continue to pass the received packets to the kernel stack. At some point, when all RX buffers deplete, driver may fall into a sleep, and not recover when memory for new RX buffers is once again availible. This is because hardware does not have valid descriptors, so no interrupt will be generated for the driver to return to work in napi context. Fix it by schedule the napi poll function from stats_task delayed workqueue, as long as the allocations fail. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4_en: Add interface identify supportIdo Shamay
Add support for the interface ethtool identify feature. Make the physical port LED to blink with green and yellow colors. The device handles the LED blink by itself (synchrous use of set_phys_id), by returning 0 to ETHTOOL_ID_ACTIVE command. Signed-off-by: Eyal Grossman <eyalgr@mellanox.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31net/mlx4_en: Add Flow control statistics display via ethtoolMatan Barak
Flow control per priority and Global pause counters are now visible via ethtool. The counters shows statistics regarding pauses in the device. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31net/mlx4_en: Protect access to the statistics bitmapEran Ben Elisha
This will allow parallel access to the statistics bitmap. A pre-step for adding PFC counters, where the statistics bitmap can be dynamically changed when modifying the PFC setting. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31net/mlx4_en: Support general selective view of ethtool statisticsEran Ben Elisha
The driver uses a bitmask to indicate which statistics should be displayed to the user in ethtool. The bitmask is u64, therefore we are limited for a selective view of up to 64 statistics. Extend the bitmap in order to show more than 64 statistics. In addition, add packet statistics to the ethtool display for PF. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31net/mlx4_en: Move statistics bitmap setting to the Ethernet driverEran Ben Elisha
The statistics bitmap belongs to the Ethernet driver, move it there. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31net/mlx4_en: Create new header file for all statistics infoEran Ben Elisha
Add mlx4_stats.h file and move there all statistics structs and marcos. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/emulex/benet/be_main.c net/core/sysctl_net_core.c net/ipv4/inet_diag.c The be_main.c conflict resolution was really tricky. The conflict hunks generated by GIT were very unhelpful, to say the least. It split functions in half and moved them around, when the real actual conflict only existed solely inside of one function, that being be_map_pci_bars(). So instead, to resolve this, I checked out be_main.c from the top of net-next, then I applied the be_main.c changes from 'net' since the last time I merged. And this worked beautifully. The inet_diag.c and sysctl_net_core.c conflicts were simple overlapping changes, and were easily to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18net/mlx4_en: Fix off-by-one in ethtool statistics displayEran Ben Elisha
NUM_PORT_STATS was 9 instead of 10, which caused off-by-one bug when displaying the statistics starting from tx_chksum_offload in ethtool. Fixes: f8c6455bb04b ('net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06net/mlx4_en: Add QCN parameters and statistics handlingShani Michaeli
Implement the IEEE DCB handlers for set/get QCN parameters and statistics reading per TC. Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04net/mlx4_en: Port aggregation configurationMoni Shoua
Capture NETDEV events generated by the bonding driver and based on that make decisions of how to configure port aggregation in the mlx4 core driver. This includes setting the V2P port table and re-creating the interested interfaces in bonded/non-bonded mode. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11net/mlx4: Change QP allocation schemeEugenia Emantayev
When using BF (Blue-Flame), the QPN overrides the VLAN, CV, and SV fields in the WQE. Thus, BF may only be used for QPNs with bits 6,7 unset. The current Ethernet driver code reserves a Tx QP range with 256b alignment. This is wrong because if there are more than 64 Tx QPs in use, QPNs >= base + 65 will have bits 6/7 set. This problem is not specific for the Ethernet driver, any entity that tries to reserve more than 64 BF-enabled QPs should fail. Also, using ranges is not necessary here and is wasteful. The new mechanism introduced here will support reservation for "Eth QPs eligible for BF" for all drivers: bare-metal, multi-PF, and VFs (when hypervisors support WC in VMs). The flow we use is: 1. In mlx4_en, allocate Tx QPs one by one instead of a range allocation, and request "BF enabled QPs" if BF is supported for the function 2. In the ALLOC_RES FW command, change param1 to: a. param1[23:0] - number of QPs b. param1[31-24] - flags controlling QPs reservation Bit 31 refers to Eth blueflame supported QPs. Those QPs must have bits 6 and 7 unset in order to be used in Ethernet. Bits 24-30 of the flags are currently reserved. When a function tries to allocate a QP, it states the required attributes for this QP. Those attributes are considered "best-effort". If an attribute, such as Ethernet BF enabled QP, is a must-have attribute, the function has to check that attribute is supported before trying to do the allocation. In a lower layer of the code, mlx4_qp_reserve_range masks out the bits which are unsupported. If SRIOV is used, the PF validates those attributes and masks out unsupported attributes as well. In order to notify VFs which attributes are supported, the VF uses QUERY_FUNC_CAP command. This command's mailbox is filled by the PF, which notifies which QP allocation attributes it supports. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-08net/mlx4_en: Support for configurable RSS hash functionEyal Perry
The ConnectX HW is capable of using one of the following hash functions: Toeplitz and an XOR hash function. This patch extends the implementation of the mlx4_en driver set/get_rxfh callbacks to support getting and setting the RSS hash function used by the device. Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23mlx4: fix mlx4_en_set_rxfh()Eric Dumazet
mlx4_en_set_rxfh() can crash if no RSS indir table is provided. While we are at it, allow RSS key to be changed with ethtool -X Tested: myhost:~# cat /proc/sys/net/core/netdev_rss_key b6:89:91:f3:b2:c3:c2:90:11:e8:ce:45:e8:a9:9d:1c:f2:f6:d4:53:61:8b:26:3a:b3:9a:57:97:c3:b6:79:4d:2e:d9:66:5c:72:ed:b6:8e:c5:5d:4d:8c:22:67:30:ab:8a:6e:c3:6a myhost:~# ethtool -x eth0 RX flow hash indirection table for eth0 with 8 RX ring(s): 0: 0 1 2 3 4 5 6 7 RSS hash key: b6:89:91:f3:b2:c3:c2:90:11:e8:ce:45:e8:a9:9d:1c:f2:f6:d4:53:61:8b:26:3a:b3:9a:57:97:c3:b6:79:4d:2e:d9:66:5c:72:ed:b6:8e myhost:~# ethtool -X eth0 hkey \ 03:0e:e2:43:fa:82:0e:73:14:2d:c0:68:21:9e:82:99:b9:84:d0:22:e2:b3:64:9f:4a:af:00:fa:cc:05:b4:4a:17:05:14:73:76:58:bd:2f myhost:~# ethtool -x eth0 RX flow hash indirection table for eth0 with 8 RX ring(s): 0: 0 1 2 3 4 5 6 7 RSS hash key: 03:0e:e2:43:fa:82:0e:73:14:2d:c0:68:21:9e:82:99:b9:84:d0:22:e2:b3:64:9f:4a:af:00:fa:cc:05:b4:4a:17:05:14:73:76:58:bd:2f Reported-by: Ben Hutchings <ben@decadent.org.uk> Fixes: b9d1ab7eb42e ("mlx4: use netdev_rss_key_fill() helper") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETEShani Michaeli
When processing received traffic, pass CHECKSUM_COMPLETE status to the stack, with calculated checksum for non TCP/UDP packets (such as GRE or ICMP). Although the stack expects checksum which doesn't include the pseudo header, the HW adds it. To address that, we are subtracting the pseudo header checksum from the checksum value provided by the HW. In the IPv6 case, we also compute/add the IP header checksum which is not added by the HW for such packets. Cc: Jerry Chu <hkchu@google.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03net/mlx4_en: Remove RX buffers alignment to IP_ALIGNIdo Shamay
When IP_ALIGN has a non zero value, hardware will write to a non aligned address. The only reader from this address is when copying the header from the first frag into the linear buffer (further access to the IP address will be from the linear buffer, in which the headers are aligned). Since the penalty of non align access by the hardware is greater than the software memcpy, changing the frag_align to always be 0. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net/mlx4_en: Add support for setting rxvlan offload OFF/ONSaeed Mahameed
Rename mlx4_en_timestamp_config to mlx4_en_reset_config and extend it to support choosing RX vlan offload configuration. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net/mlx4_en: Use PTYS register to query ethtool settingsSaeed Mahameed
- If dev cap MLX4_DEV_CAP_FLAG2_ETH_PROT_CTRL is ON, query PTYS register to fill ethtool settings. else use default values. - Use autoneg port cap and dev backplane autoneg cap to reprort autoneg interface capbilities. - Fix typo in mlx4_en_port_state struct field (transciver to transceiver). Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: Use the new tx_copybreak to set inline thresholdEric Dumazet
Instead of setting inline threshold using module parameter only on driver load, use set_tunable() to set it dynamically. No need to store the threshold per ring, using instead the netdev global priv->prof->inline_thold Initial value still is set using the module parameter, therefore backward compatability is kept. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: Avoid a cache line miss in TX completion for single frag skb'sEric Dumazet
Add frag0_dma/frag0_byte_count into mlx4_en_tx_info to avoid a cache line miss in TX completion for frames having one dma element. (We avoid reading back the tx descriptor) Note this could be extended to 2/3 dma elements later, as we have free room in mlx4_en_tx_info Also, mlx4_en_free_tx_desc() no longer accesses skb_shinfo(). We use a new nr_maps fields in mlx4_en_tx_info to avoid 2 or 3 cache misses. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: Avoid calling bswap in tx fast pathEric Dumazet
- doorbell_qpn is stored in the cpu_to_be32() way to avoid bswap() in fast path. - mdev->mr.key stored in ring->mr_key to also avoid bswap() and access to cold cache line. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: Align tx path structures to cache linesEric Dumazet
Reorganize struct mlx4_en_tx_ring to have: - One cache line containing last_nr_txbb & cons & wake_queue, used by tx completion. - One cache line containing fields dirtied by mlx4_en_xmit() - Following part is read mostly and shared by cpus. Align struct mlx4_en_tx_info to a cache line Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: Code cleanups in tx pathEric Dumazet
- Remove unused variable ring->poll_cnt - No need to set some fields if using blueflame - Add missing const's - Use unlikely - Remove unneeded new line - Make some comments more precise - struct mlx4_bf @offset field reduced to unsigned int to save space Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-04mlx4: add a new xmit_more counterEric Dumazet
ethtool -S reports a new counter, tracking number of time doorbell was not triggered, because skb->xmit_more was set. $ ethtool -S eth0 | egrep "tx_packet|xmit_more" tx_packets: 2413288400 xmit_more: 666121277 I merged the tso_packet false sharing avoidance in this patch as well. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26mellanox: Change en_print to return voidJoe Perches
No caller or macro uses the return value so make it void. Signed-off-by: Joe Perches <joe@perches.com> Acked-By: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net/mlx4_en: Add mlx4_en_get_cqe helperIdo Shamay
This function derives the base address of the CQE from the CQE size, and calculates the real CQE context segment in it from the factor (this is like before). Before this change the code used the factor to calculate the base address of the CQE as well. The factor indicates in which segment of the cqe stride the cqe information is located. For 32-byte strides, the segment is 0, and for 64 byte strides, the segment is 1 (bytes 32..63). Using the factor was ok as long as we had only 32 and 64 byte strides. However, with larger strides, the factor is zero, and so cannot be used to calculate the base of the CQE. The helper uses the same method of CQE buffer pulling made by all other components that reads the CQE buffer (mlx4_ib driver and libmlx4). Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22net/mlx4_en: Reduce memory consumption on kdump kernelAmir Vadai
When memory is limited, reduce number of rx and tx rings. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22net/mlx4_en: Disable blueflame using ethtool private flagsAmir Vadai
Enable the user to turn off the hardware feature called BlueFlame. Since it is something specific to mlx4_en hardware, we control the feature via ethtool private flags. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/mlx4_en: Ignore budget on TX napi pollingAmir Vadai
It is recommended that TX work not count against the quota. The cost of TX packet liberation is a minute percentage of what it costs to process an RX frame. Furthermore, that SKB freeing makes memory available for other paths in the stack. Give the TX a larger budget and be more aggressive about cleaning up the Tx descriptors this budget could be changed using ethtool: $ ethtool -C eth1 tx-frames-irq <budget> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/mlx4_en: Fix mac_hash database inconsistencyNoa Osherovich
Using a local copy of dev_addr in mlx4_en_set_mac() to prevent dev_addr from being modified during error flow or when dev_addr is modified in another context (which is another problem that is being discussed over the mailing list [1]). Also fixing bad naming of priv->prev_mac into priv->current_mac. [1] - http://patchwork.ozlabs.org/patch/351489/ Reviewed-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/mlx4_en: Do not count LLC/SNAP in MTU calculationYishai Hadas
LLC/SNAP 8 bytes should not be added as part of header calculation. If used, payload will be decreased accordingly. For MTU of 1500 we'll set 1522 instead of 1523. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Liran Liss <liranl@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-02net/mlx4_en: Don't use irq_affinity_notifier to track changes in IRQ ↵Amir Vadai
affinity map IRQ affinity notifier can only have a single notifier - cpu_rmap notifier. Can't use it to track changes in IRQ affinity map. Detect IRQ affinity changes by comparing CPU to current IRQ affinity map during NAPI poll thread. CC: Thomas Gleixner <tglx@linutronix.de> CC: Ben Hutchings <ben@decadent.org.uk> Fixes: 2eacc23 ("net/mlx4_core: Enforce irq affinity changes immediatly") Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net/mlx4_en: Use affinity hintYuval Atias
The “affinity hint” mechanism is used by the user space daemon, irqbalancer, to indicate a preferred CPU mask for irqs. Irqbalancer can use this hint to balance the irqs between the cpus indicated by the mask. We wish the HCA to preferentially map the IRQs it uses to numa cores close to it. To accomplish this, we use cpumask_set_cpu_local_first(), that sets the affinity hint according the following policy: First it maps IRQs to “close” numa cores. If these are exhausted, the remaining IRQs are mapped to “far” numa cores. Signed-off-by: Yuval Atias <yuvala@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02Revert "net/mlx4_en: Use affinity hint"David S. Miller
This reverts commit 70a640d0dae3a9b1b222ce673eb5d92c263ddd61. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-01net/mlx4_en: Use affinity hintYuval Atias
The “affinity hint” mechanism is used by the user space daemon, irqbalancer, to indicate a preferred CPU mask for irqs. Irqbalancer can use this hint to balance the irqs between the cpus indicated by the mask. We wish the HCA to preferentially map the IRQs it uses to numa cores close to it. To accomplish this, we use cpumask_set_cpu_local_first(), that sets the affinity hint according the following policy: First it maps IRQs to “close” numa cores. If these are exhausted, the remaining IRQs are mapped to “far” numa cores. Signed-off-by: Yuval Atias <yuvala@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-08mellanox: Logging message cleanupsJoe Perches
Use a more current logging style. o Coalesce formats o Add missing spaces for coalesced formats o Align arguments for modified formats o Add missing newlines for some logging messages o Use DRV_NAME as part of format instead of %s, DRV_NAME to reduce overall text. o Use ..., ##__VA_ARGS__ instead of args... in macros o Correct a few format typos o Use a single line message where appropriate Signed-off-by: Joe Perches <joe@perches.com> Acked-By: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16mlx4_en: don't use napi_synchronize inside mlx4_en_netpollChris Mason
The mlx4 driver is triggering schedules while atomic inside mlx4_en_netpoll: spin_lock_irqsave(&cq->lock, flags); napi_synchronize(&cq->napi); ^^^^^ msleep here mlx4_en_process_rx_cq(dev, cq, 0); spin_unlock_irqrestore(&cq->lock, flags); This was part of a patch by Alexander Guller from Mellanox in 2011, but it still isn't upstream. Signed-off-by: Chris Mason <clm@fb.com> cc: stable@vger.kernel.org Acked-By: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-01net/mlx4: Set proper build dependancy with vxlanOr Gerlitz
Make sure that vxlan_get_rx_port() is present in the kernel build in a manner consistent with mlx4, else mlx4 can be made built-in where vxlan a module and the phase of the build linking fails. Add CONFIG_MLX4_EN_VXLAN for that. Also, #ifdef the advertizement and implementation of the mlx4 vxlan ndo calls and related code under this config directive. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28net/mlx4: Implement vxlan ndo callsOr Gerlitz
Add implementation for the add/del vxlan port ndo calls, using the CONFIG_DEV firmware command. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-27 04:04:40 +0000