aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/cavium
AgeCommit message (Collapse)Author
2019-03-27thunderx: eliminate extra calls to put_page() for pages held for recyclingDean Nelson
For the non-XDP case, commit 773225388dae15e72790 ("net: thunderx: Optimize page recycling for XDP") added code to nicvf_free_rbdr() that, when releasing the additional receive buffer page reference held for recycling, repeatedly calls put_page() until the page's _refcount goes to zero. Which results in the page being freed. This is not okay if the page's _refcount was greater than 1 (in the non-XDP case), because nicvf_free_rbdr() should not be subtracting more than what nicvf_alloc_page() had previously added to the page's _refcount, which was only 1 (in the non-XDP case). This can arise if a received packet is still being processed and the receive buffer (i.e., skb->head) has not yet been freed via skb_free_head() when nicvf_free_rbdr() is spinning through the aforementioned put_page() loop. If this should occur, when the received packet finishes processing and skb_free_head() is called, various problems can ensue. Exactly what, depends on whether the page has already been reallocated or not, anything from "BUG: Bad page state ... ", to "Unable to handle kernel NULL pointer dereference ..." or "Unable to handle kernel paging request...". So this patch changes nicvf_free_rbdr() to only call put_page() once for pages held for recycling (in the non-XDP case). Fixes: 773225388dae ("net: thunderx: Optimize page recycling for XDP") Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27thunderx: enable page recycling for non-XDP caseDean Nelson
Commit 773225388dae15e72790 ("net: thunderx: Optimize page recycling for XDP") added code to nicvf_alloc_page() that inadvertently disables receive buffer page recycling for the non-XDP case by always NULL'ng the page pointer. This patch corrects two if-conditionals to allow for the recycling of non-XDP mode pages by only setting the page pointer to NULL when the page is not ready for recycling. Fixes: 773225388dae ("net: thunderx: Optimize page recycling for XDP") Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-24net: devlink: select NET_DEVLINK from driversJiri Pirko
Some drivers are becoming more dependent on NET_DEVLINK being selected in configuration. With upcoming compat functions, the behavior would be wrong in case devlink was not compiled in. So make the drivers select NET_DEVLINK and rely on the functions being there, not just stubs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-11net: thunder: fix a potential NULL pointer dereferenceKangjie Lu
In case alloc_ordered_workqueue fails, the fix reports the error and returns -ENOMEM. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-11net: lio_core: fix two NULL pointer dereferencesKangjie Lu
In case octeon_alloc_soft_command fails, the fix reports the error and returns to avoid NULL pointer dereferences. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-11net: liquidio: fix a NULL pointer dereferenceKangjie Lu
In case octeon_alloc_soft_command fails, the fix reports the error and returns to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26net: devlink: turn devlink into a built-inJakub Kicinski
Being able to build devlink as a module causes growing pains. First all drivers had to add a meta dependency to make sure they are not built in when devlink is built as a module. Now we are struggling to invoke ethtool compat code reliably. Make devlink code built-in, users can still not build it at all but the dynamically loadable module option is removed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three conflicts, one of which, for marvell10g.c is non-trivial and requires some follow-up from Heiner or someone else. The issue is that Heiner converted the marvell10g driver over to use the generic c45 code as much as possible. However, in 'net' a bug fix appeared which makes sure that a new local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0 is cleared. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: remove link change polling code and info from nicpfVadim Lomovtsev
Since link change polling routine was moved to nicvf side, we don't need anymore polling function at nicpf side along with link status info for all enabled Vfs as at VF side this info is already tracked. This commit is to remove unnecessary code & fields from nicpf structure. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: move link state polling function to VFVadim Lomovtsev
Move the link change polling task to VF side in order to prevent races between VF and PF while sending link change message(s). This commit is to implement link change request to be initiated by VF. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: add mutex to protect mailbox from concurrent calls for same VFVadim Lomovtsev
In some cases it could happen that nicvf_send_msg_to_pf() could be called concurrently for the same NIC VF, and thus re-writing mailbox contents and breaking messaging sequence with PF by re-writing NICVF data. This commit is to implement mutex for NICVF to protect mailbox registers and NICVF messaging control data from concurrent access. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: rework xcast message structure to make it fit into 64 bitVadim Lomovtsev
To communicate to PF each of ThunderX NIC VF uses mailbox which is pair of 64 bit registers available to both VFn and PF. This commit is to change the xcast message structure in order to fit it into 64 bit. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: add nicvf_send_msg_to_pf result check for set_rx_mode_taskVadim Lomovtsev
The rx_set_mode invokes number of messages to be send to PF for receive mode configuration. In case if there any issues we need to stop sending messages and release allocated memory. This commit is to implement check of nicvf_msg_send_to_pf() result. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: make CFG_DONE message to run through generic send-ack sequenceVadim Lomovtsev
At the end of NIC VF initialization VF sends CFG_DONE message to PF without using nicvf_msg_send_to_pf routine. This potentially could re-write data in mailbox. This commit is to implement common way of sending CFG_DONE message by the same way with other configuration messages by using nicvf_send_msg_to_pf() routine. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to ↵Vadim Lomovtsev
private for each of them. Having one work queue for receive mode configuration ndo_set_rx_mode() call for all VFs results in making each of them wait till the set_rx_mode() call completes for another VF if any of close, set receive mode and change flags calls being already invoked. Potentially this could cause device state change before appropriate call of receive mode configuration completes, so the call itself became meaningless, corrupt data or break configuration sequence. We don't need any delays in NIC VF configuration sequence so having delayed work call with 0 delay has no sense. This commit is to implement one work queue for each NIC VF for set_rx_mode task and to let them work independently and replacing delayed_work with work_struct. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: correct typo in macro nameVadim Lomovtsev
Correct STREERING to STEERING at macro name for BGX steering register. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18liquidio: using NULL instead of plain integerYueHaibing
Fix following warning: drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c:1453:35: warning: Using plain integer as NULL pointer drivers/net/ethernet/cavium/liquidio/lio_main.c:2910:23: warning: Using plain integer as NULL pointer Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: Don't default Cavium PTP driver to 'y'Bjorn Helgaas
8c56df372bc1 ("net: add support for Cavium PTP coprocessor") added the Cavium PTP coprocessor driver and enabled it by default. Remove the "default y" because the driver only applies to Cavium ThunderX processors. Fixes: 8c56df372bc1 ("net: add support for Cavium PTP coprocessor") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06liquidio: Implement ndo_get_port_parent_id()Florian Fainelli
Liquidio only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID, which makes it a great candidate to be converted to use the ndo_get_port_parent_id() NDO instead of implementing switchdev_port_attr_get(). Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28liquidio: fix the validation of rx checksum status from NIC hardwareVeerasenareddy Burru
Fixed the code that was incorrectly interpreting the rx checksum validation status from hardware, and updating kernel that the packet arrived with correct checksum though the packet arrived with incorrect checksum and hardware also indicated checksum is not correct. Signed-off-by: Veerasenareddy Burru <vburru@marvell.com> Acked-by: Derek Chickles <dchickles@marvell.com> Signed-off-by: Felix Manlunas <fmanlunas@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several conflicts, seemingly all over the place. I used Stephen Rothwell's sample resolutions for many of these, if not just to double check my own work, so definitely the credit largely goes to him. The NFP conflict consisted of a bug fix (moving operations past the rhashtable operation) while chaning the initial argument in the function call in the moved code. The net/dsa/master.c conflict had to do with a bug fix intermixing of making dsa_master_set_mtu() static with the fixing of the tagging attribute location. cls_flower had a conflict because the dup reject fix from Or overlapped with the addition of port range classifiction. __set_phy_supported()'s conflict was relatively easy to resolve because Andrew fixed it in both trees, so it was just a matter of taking the net-next copy. Or at least I think it was :-) Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup() intermixed with changes on how the sdif and caller_net are calculated in these code paths in net-next. The remaining BPF conflicts were largely about the addition of the __bpf_md_ptr stuff in 'net' overlapping with adjustments and additions to the relevant data structure where the MD pointer macros are used. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-30liquidio: read sc->iq_no before release scPan Bian
The function lio_vf_rep_packet_sent_callback releases the occupation of sc via octeon_free_soft_command. sc should not be used after that. Unfortunately, sc->iq_no is read. To fix this, the patch stores sc->iq_no into a local variable before releasing sc and then uses the local variable instead of sc->iq_no. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-30liquidio: fix spelling mistake "deferal" -> "deferral"Colin Ian King
There is a spelling mistake in the oct_stats_strings array, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Trivial conflict in net/core/filter.c, a locally computed 'sdif' is now an argument to the function. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: thunderx: fix NULL pointer dereference in nic_removeLorenzo Bianconi
Fix a possible NULL pointer dereference in nic_remove routine removing the nicpf module if nic_probe fails. The issue can be triggered with the following reproducer: $rmmod nicvf $rmmod nicpf [ 521.412008] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000014 [ 521.422777] Mem abort info: [ 521.425561] ESR = 0x96000004 [ 521.428624] Exception class = DABT (current EL), IL = 32 bits [ 521.434535] SET = 0, FnV = 0 [ 521.437579] EA = 0, S1PTW = 0 [ 521.440730] Data abort info: [ 521.443603] ISV = 0, ISS = 0x00000004 [ 521.447431] CM = 0, WnR = 0 [ 521.450417] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000072a3da42 [ 521.457022] [0000000000000014] pgd=0000000000000000 [ 521.461916] Internal error: Oops: 96000004 [#1] SMP [ 521.511801] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 521.518664] pstate: 80400005 (Nzcv daif +PAN -UAO) [ 521.523451] pc : nic_remove+0x24/0x88 [nicpf] [ 521.527808] lr : pci_device_remove+0x48/0xd8 [ 521.532066] sp : ffff000013433cc0 [ 521.535370] x29: ffff000013433cc0 x28: ffff810f6ac50000 [ 521.540672] x27: 0000000000000000 x26: 0000000000000000 [ 521.545974] x25: 0000000056000000 x24: 0000000000000015 [ 521.551274] x23: ffff8007ff89a110 x22: ffff000001667070 [ 521.556576] x21: ffff8007ffb170b0 x20: ffff8007ffb17000 [ 521.561877] x19: 0000000000000000 x18: 0000000000000025 [ 521.567178] x17: 0000000000000000 x16: 000000000000010ffc33ff98 x8 : 0000000000000000 [ 521.593683] x7 : 0000000000000000 x6 : 0000000000000001 [ 521.598983] x5 : 0000000000000002 x4 : 0000000000000003 [ 521.604284] x3 : ffff8007ffb17184 x2 : ffff8007ffb17184 [ 521.609585] x1 : ffff000001662118 x0 : ffff000008557be0 [ 521.614887] Process rmmod (pid: 1897, stack limit = 0x00000000859535c3) [ 521.621490] Call trace: [ 521.623928] nic_remove+0x24/0x88 [nicpf] [ 521.627927] pci_device_remove+0x48/0xd8 [ 521.631847] device_release_driver_internal+0x1b0/0x248 [ 521.637062] driver_detach+0x50/0xc0 [ 521.640628] bus_remove_driver+0x60/0x100 [ 521.644627] driver_unregister+0x34/0x60 [ 521.648538] pci_unregister_driver+0x24/0xd8 [ 521.652798] nic_cleanup_module+0x14/0x111c [nicpf] [ 521.657672] __arm64_sys_delete_module+0x150/0x218 [ 521.662460] el0_svc_handler+0x94/0x110 [ 521.666287] el0_svc+0x8/0xc [ 521.669160] Code: aa1e03e0 9102c295 d503201f f9404eb3 (b9401660) Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2018-11-23net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queueLorenzo Bianconi
Reset snd_queue tso_hdrs pointer to NULL in nicvf_free_snd_queue routine since it is used to check if tso dma descriptor queue has been previously allocated. The issue can be triggered with the following reproducer: $ip link set dev enP2p1s0v0 xdpdrv obj xdp_dummy.o $ip link set dev enP2p1s0v0 xdpdrv off [ 341.467649] WARNING: CPU: 74 PID: 2158 at mm/vmalloc.c:1511 __vunmap+0x98/0xe0 [ 341.515010] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 341.521874] pstate: 60400005 (nZCv daif +PAN -UAO) [ 341.526654] pc : __vunmap+0x98/0xe0 [ 341.530132] lr : __vunmap+0x98/0xe0 [ 341.533609] sp : ffff00001c5db860 [ 341.536913] x29: ffff00001c5db860 x28: 0000000000020000 [ 341.542214] x27: ffff810feb5090b0 x26: ffff000017e57000 [ 341.547515] x25: 0000000000000000 x24: 00000000fbd00000 [ 341.552816] x23: 0000000000000000 x22: ffff810feb5090b0 [ 341.558117] x21: 0000000000000000 x20: 0000000000000000 [ 341.563418] x19: ffff000017e57000 x18: 0000000000000000 [ 341.568719] x17: 0000000000000000 x16: 0000000000000000 [ 341.574020] x15: 0000000000000010 x14: ffffffffffffffff [ 341.579321] x13: ffff00008985eb27 x12: ffff00000985eb2f [ 341.584622] x11: ffff0000096b3000 x10: ffff00001c5db510 [ 341.589923] x9 : 00000000ffffffd0 x8 : ffff0000086868e8 [ 341.595224] x7 : 3430303030303030 x6 : 00000000000006ef [ 341.600525] x5 : 00000000003fffff x4 : 0000000000000000 [ 341.605825] x3 : 0000000000000000 x2 : ffffffffffffffff [ 341.611126] x1 : ffff0000096b3728 x0 : 0000000000000038 [ 341.616428] Call trace: [ 341.618866] __vunmap+0x98/0xe0 [ 341.621997] vunmap+0x3c/0x50 [ 341.624961] arch_dma_free+0x68/0xa0 [ 341.628534] dma_direct_free+0x50/0x80 [ 341.632285] nicvf_free_resources+0x160/0x2d8 [nicvf] [ 341.637327] nicvf_config_data_transfer+0x174/0x5e8 [nicvf] [ 341.642890] nicvf_stop+0x298/0x340 [nicvf] [ 341.647066] __dev_close_many+0x9c/0x108 [ 341.650977] dev_close_many+0xa4/0x158 [ 341.654720] rollback_registered_many+0x140/0x530 [ 341.659414] rollback_registered+0x54/0x80 [ 341.663499] unregister_netdevice_queue+0x9c/0xe8 [ 341.668192] unregister_netdev+0x28/0x38 [ 341.672106] nicvf_remove+0xa4/0xa8 [nicvf] [ 341.676280] nicvf_shutdown+0x20/0x30 [nicvf] [ 341.680630] pci_device_shutdown+0x44/0x88 [ 341.684720] device_shutdown+0x144/0x250 [ 341.688640] kernel_restart_prepare+0x44/0x50 [ 341.692986] kernel_restart+0x20/0x68 [ 341.696638] __se_sys_reboot+0x210/0x238 [ 341.700550] __arm64_sys_reboot+0x24/0x30 [ 341.704555] el0_svc_handler+0x94/0x110 [ 341.708382] el0_svc+0x8/0xc [ 341.711252] ---[ end trace 3f4019c8439959c9 ]--- [ 341.715874] page:ffff7e0003ef4000 count:0 mapcount:0 mapping:0000000000000000 index:0x4 [ 341.723872] flags: 0x1fffe000000000() [ 341.727527] raw: 001fffe000000000 ffff7e0003f1a008 ffff7e0003ef4048 0000000000000000 [ 341.735263] raw: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000 [ 341.742994] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) where xdp_dummy.c is a simple bpf program that forwards the incoming frames to the network stack (available here: https://github.com/altoor/xdp_walkthrough_examples/blob/master/sample_1/xdp_dummy.c) Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support") Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: cavium: clean up return value check in cavium_ptp_probeYueHaibing
ptp_clock_register never return NULL, so no need check this in cavium_ptp_probe. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22net: thunderx: set xdp_prog to NULL if bpf_prog_add failsLorenzo Bianconi
Set xdp_prog pointer to NULL if bpf_prog_add fails since that routine reports the error code instead of NULL in case of failure and xdp_prog pointer value is used in the driver to verify if XDP is currently enabled. Moreover report the error code to userspace if nicvf_xdp_setup fails Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: ethernet: Convert phydev advertize and supported from u32 to link modeAndrew Lunn
There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-04Merge tag 'mlx5-updates-2018-10-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2018-10-03 mlx5 core driver and ethernet netdev updates, please note there is a small devlink releated update to allow extack argument to eswitch operations. From Eli Britstein, 1) devlink: Add extack argument to the eswitch related operations 2) net/mlx5e: E-Switch, return extack messages for failures in the e-switch devlink callbacks 3) net/mlx5e: Add extack messages for TC offload failures From Eran Ben Elisha, 4) mlx5e: Add counter for aRFS rule insertion failures From Feras Daoud 5) Fast teardown support for mlx5 device This change introduces the enhanced version of the "Force teardown" that allows SW to perform teardown in a faster way without the need to reclaim all the FW pages. Fast teardown provides the following advantages: 1- Fix a FW race condition that could cause command timeout 2- Avoid moving to polling mode 3- Close the vport to prevent PCI ACK to be sent without been scatter to memory ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-04liquidio: fix a couple of spelling mistakesColin Ian King
Trivial fix to spelling mistakes in dev_dbg warning messages "Reloade" -> "Reload" "chang" -> "change" Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-03devlink: Add extack for eswitch operationsEli Britstein
Add extack argument to the eswitch related operations. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-26net: liquidio: list usage cleanupzhong jiang
Trival cleanup, list_move_tail will implement the same function that list_del() + list_add_tail() will do. hence just replace them. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: cavium: fix return type of ndo_start_xmit functionYueHaibing
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17liquidio: remove duplicated include from lio_vf_rep.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17liquidio: Add the features to show FEC settings and set FEC settingsWeilin Chang
1. Add functions for get_fecparam and set_fecparam. 2. Modify lio_get_link_ksettings to display FEC setting. Signed-off-by: Weilin Chang <weilin.chang@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Use DIV_ROUND_UP instead of reimplementing its functionzhong jiang
DIV_ROUND_UP has implemented the code-opened function. Therefore, just replace the implementation with DIV_ROUND_UP. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11liquidio: Removed droq lockIntiyaz Basha
With the changes in patch 1 and 2, droq lock is not required. So removing droq lock. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11liquidio: Per queue oom work queueIntiyaz Basha
Removed oom task unconditional rescheduling every 250ms and created per queue oom work queue for refilling buffers. The oom task refills only if the available descriptors is fallen to 64. There will be no packets coming in after hitting this level. So NAPI will not run until oom task refills the buffers. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11liquidio: Disabling tasklet when NAPI is activeIntiyaz Basha
Control packets are processed in tasklet when interface is down and in NAPI when interface is up. So tasklet can be disabled when interface up and re-enabled when interface is down. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-07liquidio: lio_fetch_vf_stats() can be statickbuild test robot
Fixes: 488752220b4a ("liquidio: Add spoof checking on a VF MAC address") Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06liquidio CN23XX: Remove set but not used variable 'ring_flag'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c: In function 'cn23xx_setup_octeon_vf_device': drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c:619:20: warning: variable 'ring_flag' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06liquidio: Add spoof checking on a VF MAC addressWeilin Chang
1. Provide the API to set/unset the spoof checking feature. 2. Add a function to periodically provide the count of found packets with spoof VF MAC address. 3. Prevent VF MAC address changing while the spoofchk of the VF is on unless the changing MAC address is issued from PF. Signed-off-by: Weilin Chang <weilin.chang@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03liquidio: Added delayed work for periodically updating the link statistics.Pradeep Nalla
Signed-off-by: Pradeep Nalla <pradeep.nalla@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01liquidio: remove set but not used variable 'irh'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/cavium/liquidio/request_manager.c: In function 'lio_process_iq_request_list': drivers/net/ethernet/cavium/liquidio/request_manager.c:383:27: warning: variable 'irh' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29liquidio: remove obsolete functions and data structuresFelix Manlunas
1. Remove unused functions and data structures. 2. Change the sending of the remaining soft commands to synchronous. Signed-off-by: Weilin Chang <weilin.chang@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29liquidio: change octnic_ctrl_pkt to do synchronous soft commandsFelix Manlunas
1. Change struct octnic_ctrl_pkt to support synchronous operation. 2. Change code which use structure octnic_ctrl_pkt to send sc's synchronously. Signed-off-by: Weilin Chang <weilin.chang@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-01 20:41:35 +0000