summaryrefslogtreecommitdiffstats
path: root/drivers/misc/mei
AgeCommit message (Collapse)Author
2014-09-05mei: nfc: fix memory leak in error pathAlexander Usyskin
commit 8e8248b1369c97c7bb6f8bcaee1f05deeabab8ef upstream. NFC will leak buffer if send failed. Use single exit point that does the freeing Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-05mei: reset client state on queued connect requestAlexander Usyskin
commit 73ab4232388b7a08f17c8d08141ff2099fa0b161 upstream. If connect request is queued (e.g. device in pg) set client state to initializing, thus avoid preliminary exit in wait if current state is disconnected. This is regression from: commit e4d8270e604c3202131bac607969605ac397b893 Author: Alexander Usyskin <alexander.usyskin@intel.com> mei: set connecting state just upon connection request is sent to the fw Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-05mei: start disconnect request timer consistentlyAlexander Usyskin
commit 22b987a325701223f9a37db700c6eb20b9924c6f upstream. Link must be reset in case the fw doesn't respond to client disconnect request. We did charge the timer only in irq path from mei_cl_irq_close and not in mei_cl_disconnect Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-16mei: me: read H_CSR after asserting resetTomas Winkler
commit c40765d919d25d2d44d99c4ce39e48808f137e1e upstream. According the spec the host should read H_CSR again after asserting reset H_RST to ensure that reset was read by the firmware Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-16mei: me: drop harmful wait optimizationTomas Winkler
commit 07cd7be3d92eeeae1f92a017f2cfe4fdd9256526 upstream. It my take time till ME_RDY will be cleared after the reset, so we cannot check the bit before we got the interrupt Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-16mei: me: fix hw ready reset flowTomas Winkler
commit b04ada92ffaabb868497a1fce8e4f6bf74e5488f upstream. We cleared H_RST for H_CSR on spurious interrupt generated when ME_RDY while cleared and not while ME_RDY is set. The spurious interrupt is not delivered on all platforms in this case the driver may fail to initialize. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06mei: ignore client writing state during cb completionAlexander Usyskin
commit 34ec43661fe8f1977dd0f05353302ae2ed10aabb upstream. Ignore client writing state during cb completion to fix a memory leak. When moving cbs to the completion list we should not look at writing_state as this state can be already overwritten by next write, the fact that a cb is on the write waiting list means that it was already written to the HW and we can safely complete it. Same pays for wait in poll handler, we do not have to check the state wake is done after completion list processing. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06mei: me: do not load the driver if the FW doesn't support MEI interfaceTomas Winkler
commit 5e6533a6f52f1a8283b2f818f5828be99a417dd6 upstream. NM and SPS FW types that may run on ME device on server platforms do not have valid MEI/HECI interface and driver should not be bound to it as this might lead to system hung. In practice not all BIOSes effectively hide such devices from the OS and in some cases it is not possible. We determine FW type by examining Host FW status registers in order to unbind the driver. In this patch we are adding check for ME on Cougar Point, Lynx Point Devices Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06mei: fix memory leak of pending write cb objectsTomas Winkler
commit cc99ecfdac01215594c73907726b12f251c21e20 upstream. Write callbacks are released on the write completed path but when file handler is closed before the writes are completed those are left dangling on write and write_waiting queues. We add mei_io_list_free function to perform this task Also move static functions to client.c form client.h Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18mei: set client's read_cb to NULL when flow control failsChao Bi
In mei_cl_read_start(), if it fails to send flow control request, it will release "cl->read_cb" but forget to set pointer to NULL, leaving "cl->read_cb" still pointing to random memory, next time this client is operated like mei_release(), it has chance to refer to this wrong pointer. Fixes: PANIC at kfree in mei_release() [228781.826904] Call Trace: [228781.829737] [<c16249b8>] ? mei_cl_unlink+0x48/0xa0 [228781.835283] [<c1624487>] mei_io_cb_free+0x17/0x30 [228781.840733] [<c16265d8>] mei_release+0xa8/0x180 [228781.845989] [<c135c610>] ? __fsnotify_parent+0xa0/0xf0 [228781.851925] [<c1325a69>] __fput+0xd9/0x200 [228781.856696] [<c1325b9d>] ____fput+0xd/0x10 [228781.861467] [<c125cae1>] task_work_run+0x81/0xb0 [228781.866821] [<c1242e53>] do_exit+0x283/0xa00 [228781.871786] [<c1a82b36>] ? kprobe_flush_task+0x66/0xc0 [228781.877722] [<c124eeb8>] ? __dequeue_signal+0x18/0x1a0 [228781.883657] [<c124f072>] ? dequeue_signal+0x32/0x190 [228781.889397] [<c1243744>] do_group_exit+0x34/0xa0 [228781.894750] [<c12517b6>] get_signal_to_deliver+0x206/0x610 [228781.901075] [<c12018d8>] do_signal+0x38/0x100 [228781.906136] [<c1626d1c>] ? mei_read+0x42c/0x4e0 [228781.911393] [<c12600a0>] ? wake_up_bit+0x30/0x30 [228781.916745] [<c16268f0>] ? mei_poll+0x120/0x120 [228781.922001] [<c1324be9>] ? vfs_read+0x89/0x160 [228781.927158] [<c16268f0>] ? mei_poll+0x120/0x120 [228781.932414] [<c133ca34>] ? fget_light+0x44/0xe0 [228781.937670] [<c1324e58>] ? SyS_read+0x68/0x80 [228781.942730] [<c12019f5>] do_notify_resume+0x55/0x70 [228781.948376] [<c1a7de5d>] work_notifysig+0x29/0x30 [228781.953827] [<c1a70000>] ? bad_area+0x5/0x3e Cc: stable <stable@vger.kernel.org> # 3.9+ Signed-off-by: Chao Bi <chao.bi@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-07mei: don't unset read cb ptr on resetAlexander Usyskin
Don't set read callback to NULL during reset as this leads to memory leak of both cb and its buffer. The memory is correctly freed during mei_release. The memory leak is detectable by kmemleak if application has open read call while system is going through suspend/resume. unreferenced object 0xecead780 (size 64): comm "AsyncTask #1", pid 1018, jiffies 4294949621 (age 152.440s) hex dump (first 32 bytes): 00 01 10 00 00 02 20 00 00 bf 30 f1 00 00 00 00 ...... ...0..... 00 00 00 00 00 00 00 00 36 01 00 00 00 70 da e2 ........6....p.. backtrace: [<c1a60aec>] kmemleak_alloc+0x3c/0xa0 [<c131ed56>] kmem_cache_alloc_trace+0xc6/0x190 [<c16243c9>] mei_io_cb_init+0x29/0x50 [<c1625722>] mei_cl_read_start+0x102/0x360 [<c16268f3>] mei_read+0x103/0x4e0 [<c1324b09>] vfs_read+0x89/0x160 [<c1324d5f>] SyS_read+0x4f/0x80 [<c1a7b318>] syscall_call+0x7/0xb [<ffffffff>] 0xffffffff unreferenced object 0xe2da7000 (size 512): comm "AsyncTask #1", pid 1018, jiffies 4294949621 (age 152.440s) hex dump (first 32 bytes): 00 6c da e2 7c 00 00 00 00 00 00 00 c0 eb 0c 59 .l..|..........Y 1b 00 00 00 01 00 00 00 02 10 00 00 01 00 00 00 ................ backtrace: [<c1a60aec>] kmemleak_alloc+0x3c/0xa0 [<c131f127>] __kmalloc+0xe7/0x1d0 [<c162447e>] mei_io_cb_alloc_resp_buf+0x2e/0x60 [<c162574c>] mei_cl_read_start+0x12c/0x360 [<c16268f3>] mei_read+0x103/0x4e0 [<c1324b09>] vfs_read+0x89/0x160 [<c1324d5f>] SyS_read+0x4f/0x80 [<c1a7b318>] syscall_call+0x7/0xb [<ffffffff>] 0xffffffff Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-07mei: clear write cb from waiting list on resetAlexander Usyskin
Clear write callbacks sitting in write_waiting list on reset. Otherwise these callbacks are left dangling and cause memory leak. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-13mei: limit the number of consecutive resetsTomas Winkler
give up reseting after 3 unsuccessful tries Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-13mei: revamp mei reset state machineTomas Winkler
1. MEI_DEV_RESETTING device state spans only hardware reset flow while starting dev state is saved into a local variable for further reference, this let us to reduce big if statements in case we are trying to avoid nested resets 2. During initializations if the reset ended in MEI_DEV_DISABLED device state we bail out with -ENODEV 3. Remove redundant interrupts_enabled parameter as this can be deduced from the starting dev_state 4. mei_reset propagates error code to the caller 5. Add mei_restart function to wrap the pci resume Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08mei: fix syntax in comments and debug outputAlexander Usyskin
Fix syntax errors in comments and debug strings Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08mei: nfc: mei_nfc_free has to be called under lockTomas Winkler
nfc_nfc_free unlink clients from the device list and has to be called under mei mutex Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08mei: use hbm idle state to prevent spurious resetsTomas Winkler
When reset is caused by hbm protocol mismatch or timeout we might end up in an endless reset loop and hbm protocol will never sync Cc: <stable@vger.kernel.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08mei: do not run reset flow from the interrupt threadTomas Winkler
This fixes a potential deadlock in case of a firmware initiated reset mei_reset has a dialog with the interrupt thread hence it has to be run from an another work item Most of the mei_resets were called from mei_hbm_dispatch which is called in interrupt thread context so this function underwent major revamp. The error code is propagated to the interrupt thread and if needed the reset is scheduled from there. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-18mei: me: set dma mask using DMA mapping APITomas Winkler
ME device is 64bit DMA capable We assume both coherent and consistent memory to match Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-18mei: enable marking internal commandsTomas Winkler
Set hbm header bit 30 for internal commands This mark commands that are generated by the device driver Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-16Merge 3.13-rc4 into char-misc-nextGreg Kroah-Hartman
We want these fixes in here.
2013-12-05mei: add 9 series PCH mei device idsTomas Winkler
And Lynx Point H Refresh and Wildcat Point LP device ids. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27mei: cleanup mei_irq_read_handlerTomas Winkler
1. Simplify function flow 2. Display errors in error or warnings level instead of debug. 3. Remove excessive debug messages Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27mei: drop redundant list_del_initAlexander Usyskin
list_del_init appears twice in row in mei_cl_unlink, drop one. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27mei: remove flash_work_queueTomas Winkler
Cancel each work properly and remove flash_work_queue. Quoting documentation: In most situations flushing the entire workqueue is overkill; you merely need to know that a particular work item isn't queued and isn't running. In such cases you should use cancel_delayed_work_sync() or cancel_work_sync() instead. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29mei: wd: host_init propagate error codes from called functionsTomas Winkler
Propagate error codes from called functions, they are correct. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29mei: replace stray pr_debug with dev_dbgAlexander Usyskin
Driver better use dev_dbg, not pr_debug. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29mei: bus: propagate error code returned by mei_me_cl_by_idTomas Winkler
no need to change error code value returned by mei_me_cl_by_id, just propagate it on Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29mei: mei_cl_link remove duplicated check for open_handle_countTomas Winkler
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29mei: print correct device state during unexpected resetAlexander Usyskin
Move the unexpected state print to the beginning of mei_reset, thus printing right state. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29mei: nfc: fix memory leak in error pathTomas Winkler
The flow may reach the err label without freeing cl and cl_info cl and cl_info weren't assigned to ndev->cl and cl_info so they weren't freed in mei_nfc_free called on error path Cc: <stable@vger.kernel.org> # 3.10+ Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-19mei: move host_clients_map cleanup to device initAlexander Usyskin
Move host_clients_map cleanup from host client init to device init. This fixes bug where we cleaned up the bitmask that servers as pool for host client ids while file descriptors are kept open during suspend. On resume a new connection will be assigned id that is already taken by opened file descriptor. Consequently read/write will fail due to mismatched book keeping. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-19mei: me: downgrade two errors to debug levelPaul Bolle
The mei_me driver prints "suspend" at error level at each suspend. It also prints "stop" at error level at driver unload. Downgrade these uninteresting messages to debug level. Cc: Adam Jackson <ajax@redhat.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-16mei: me: add Lynx Point Wellsburg work station device idTomas Winkler
add missing device id for LPT based work station Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-03mei: amthif: mei_amthif_host_init: propagate errors from called functionsTomas Winkler
propagate error codes from called functions, they are correct. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-03mei: revamp open handler countsTomas Winkler
Make open counter to be incremented and decremented from mei_cl_link and mei_cl_unlik function respectively Nfc was assuming symmetric linking API and thus open handler count was never decreased. This patch fixes that. We need to add separate open hander count for amthif which is handled out of link/unlink functions and doesn't break the symmetric API. Last we do not waste clients slots if amthif or wd are not present in the device. we don't need to allocates slots ahead it is all covered by link/unlink before the devices is responding to user space connection and thus not racing on allocation Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-03mei: simplify mei_open error handlingTomas Winkler
1. Perform simple checks first and only then attempt to allocate cl structure. 2. Remove open_handler_count test, this is already checked in mei_cl_link function 3. return -EMFILE instead of -ENOENT as expected by user space Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-29Merge 3.12-rc3 into char-misc-nextGreg Kroah-Hartman
We need/want the mei fixes in here so we can apply other updates that are depending on them. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: cancel stall timers in mei_resetAlexander Usyskin
Unset init_clients_timer and amthif_stall_timers in mei_reset in order to cancel timer ticking and hence avoid recursive reset calls. Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: bus: stop wait for read during cl state transitionTomas Winkler
Bus layer omitted check for client state transition while waiting for read completion The client state transition may occur for example as result of firmware initiated reset Add mei_cl_is_transitioning wrapper to reduce the code repetition.: Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: make me client counters less error proneTomas Winkler
1. u8 counters are prone to hard to detect overflow: make them unsigned long to match bit_ functions argument type 2. don't check me_clients_num for negativity, it is unsigned. 3. init all the me client counters from one place Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26misc: mei: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: mei_cl_unlink: no need to loop over dev listTomas Winkler
we can call list_del_init regardless the client is linked or not it is always properly initialized Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: push credentials inside the irq write handlerTomas Winkler
this eventually allows as use a single write queue both for control and data messages and removing possible race Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: propagate error from write routines instead of ENODEVTomas Winkler
ENODEV will cause application to try to reconnect since it assumes that device went through the reset write errors are not always fatal it can happen due to resource contention Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: fix function names in debug printsAlexander Usyskin
Fix calling function names in debug prints. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: prefix client log messages with client me and host idsAlexander Usyskin
define cl_dbg and cl_err macros that add me and host id prefix for debug and error log messages so we can track for the client context of the flow. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: mei_release: drop redundant check if cb is NULLTomas Winkler
mei_io_cb_free follows kfree design and check for NULL internally Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: revamp read and write length checksTomas Winkler
1. Return zero on zero length read and writes 2. For a too large write return -EFBIG as defined in man write(2) EFBIG An attempt was made to write a file that exceeds the implementation-defined maximum file size or the process's file size limit, or to write at a position past the maximum allowed offset. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26mei: fix format compilation warrning on 32 bit architectureTomas Winkler
hbm.c: In function mei_hbm_me_cl_allocate: hbm.c:52:212: warning: format %zd expects argument of type signed size_t but argument 4 has type long unsigned Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-17 12:39:52 +0000