| Age | Commit message (Collapse) | Author |
|---|
|
pr_warn()
On built-in kernels this warning will always splat, even if no ivtvfb
hardware is present, as this is part of the module init:
if (WARN(pat_enabled(),
"ivtvfb needs PAT disabled, boot with nopat kernel parameter\n")) {
Fix that by shifting the PAT requirement check out under the code
that does the "quasi-probe" for the device.
This device driver relies on an existing driver to find its own devices,
it looks for that device driver and its own found devices, then uses
driver_for_each_device() to try to see if it can probe each of those
devices as a frambuffer device with ivtvfb_init_card().
We tuck the PAT requiremenet check then on the ivtvfb_init_card() call
making the check at least require an ivtv device present before
complaining.
Reported-by: Fengguang Wu <fengguang.wu@intel.com> [0-day test robot]
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: andy@silverblocksystems.net
Cc: benh@kernel.crashing.org
Cc: bp@suse.de
Cc: dan.j.williams@intel.com
Cc: dledford@redhat.com
Cc: jkosina@suse.cz
Cc: julia.lawall@lip6.fr
Cc: luto@amacapital.net
Cc: mchehab@osg.samsung.com
Link: http://lkml.kernel.org/r/1437167245-28273-3-git-send-email-mcgrof@do-not-panic.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds
Pull LED subsystem updates from Bryan Wu:
"In this cycle, we finished to merge patches for LED Flash class
driver.
Other than that we have some bug fixes and new drivers for LED
controllers"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (33 commits)
leds:lp55xx: fix firmware loading error
leds: fix max77693-led build errors
leds: fix aat1290 build errors
leds: aat1290: pass flags parameter to devm_gpiod_get
leds: ktd2692: pass flags parameter to devm_gpiod_get
drivers/leds: don't use module_init in non-modular leds-cobalt-raq.c
leds: aat1290: add support for V4L2 Flash sub-device
DT: aat1290: Document handling external strobe sources
leds: max77693: add support for V4L2 Flash sub-device
media: Add registration helpers for V4L2 flash sub-devices
v4l: async: Add a pointer to of_node to struct v4l2_subdev, match it
Documentation: leds: Add description of v4l2-flash sub-device
leds: add BCM6358 LED driver
leds: add DT binding for BCM6358 LED controller
leds: fix brightness changing when software blinking is active
Documentation: leds-lp5523: describe master fader attributes
leds: lp5523: add master_fader support
leds: leds-gpio: Allow compile test if !GPIOLIB
leds: leds-gpio: Add missing #include <linux/of.h>
gpiolib: Add missing dummies for the unified device properties interface
...
|
|
To be consistent with other kernel interface namings, rename
of_get_named_gen_pool() to of_gen_pool_get(). In the original function
name "_named" suffix references to a device tree property, which contains
a phandle to a device and the corresponding device driver is assumed to
register a gen_pool object.
Due to a weak relation and to avoid any confusion (e.g. in future
possible scenario if gen_pool objects are named) the suffix is removed.
[sfr@canb.auug.org.au: crypto/marvell/cesa - fix up for of_get_named_gen_pool() rename]
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To be consistent with other genalloc interface namings, rename
dev_get_gen_pool() to gen_pool_get(). The original omitted "dev_" prefix
is removed, since it points to argument type of the function, and so it
does not bring any useful information.
[akpm@linux-foundation.org: update arch/arm/mach-socfpga/pm.c]
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Mark Brown <broonie@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Alan Tull <atull@opensource.altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here's the big, really big, staging tree patches for 4.2-rc1.
Loads of stuff in here, almost all just coding style fixes / churn,
and a few new drivers as well, one of which I just disabled from the
build a few minutes ago due to way too many build warnings.
Other than the one "disable this driver" patch, all of these have been
in linux-next for quite a while with no reported issues"
* tag 'staging-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1163 commits)
staging: wilc1000: disable driver due to build warnings
Staging: rts5208: fix CHANGE_LINK_STATE value
Staging: sm750fb: ddk750_swi2c.c: Insert spaces before parenthesis
Staging: sm750fb: ddk750_swi2c.c: Place braces on correct lines
Staging: sm750fb: ddk750_swi2c.c: Insert spaces around operators
Staging: sm750fb: ddk750_swi2c.c: Replace spaces with tabs
Staging: sm750fb: ddk750_swi2c.h: Shorten lines to under 80 characters
Staging: sm750fb: ddk750_swi2c.h: Replace spaces with tabs
Staging: sm750fb: modedb.h: Shorten lines to under 80 characters
Staging: sm750fb: modedb.h: Replace spaces with tabs
staging: comedi: addi_apci_3120: rename 'this_board' variables
staging: comedi: addi_apci_1516: rename 'this_board' variables
staging: comedi: ni_atmio: cleanup ni_getboardtype()
staging: comedi: vmk80xx: sanity check context used to get the boardinfo
staging: comedi: vmk80xx: rename 'boardinfo' variables
staging: comedi: dt3000: rename 'this_board' variables
staging: comedi: adv_pci_dio: rename 'this_board' variables
staging: comedi: cb_pcidas64: rename 'thisboard' variables
staging: comedi: cb_pcidas: rename 'thisboard' variables
staging: comedi: me4000: rename 'thisboard' variables
...
|
|
Pull drm updates from Dave Airlie:
"This is the main drm pull request for v4.2.
I've one other new driver from freescale on my radar, it's been posted
and reviewed, I'd just like to get someone to give it a last look, so
maybe I'll send it or maybe I'll leave it.
There is no major nouveau changes in here, Ben was working on
something big, and we agreed it was a bit late, there wasn't anything
else he considered urgent to merge.
There might be another msm pull for some bits that are waiting on
arm-soc, I'll see how we time it.
This touches some "of" stuff, acks are in place except for the fixes
to the build in various configs,t hat I just applied.
Summary:
New drivers:
- virtio-gpu:
KMS only pieces of driver for virtio-gpu in qemu.
This is just the first part of this driver, enough to run
unaccelerated userspace on. As qemu merges more we'll start
adding the 3D features for the virgl 3d work.
- amdgpu:
a new driver from AMD to driver their newer GPUs. (VI+)
It contains a new cleaner userspace API, and is a clean
break from radeon moving forward, that AMD are going to
concentrate on. It also contains a set of register headers
auto generated from AMD internal database.
core:
- atomic modesetting API completed, enabled by default now.
- Add support for mode_id blob to atomic ioctl to complete interface.
- bunch of Displayport MST fixes
- lots of misc fixes.
panel:
- new simple panels
- fix some long-standing build issues with bridge drivers
radeon:
- VCE1 support
- add a GPU reset counter for userspace
- lots of fixes.
amdkfd:
- H/W debugger support module
- static user-mode queues
- support killing all the waves when a process terminates
- use standard DECLARE_BITMAP
i915:
- Add Broxton support
- S3, rotation support for Skylake
- RPS booting tuning
- CPT modeset sequence fixes
- ns2501 dither support
- enable cmd parser on haswell
- cdclk handling fixes
- gen8 dynamic pte allocation
- lots of atomic conversion work
exynos:
- Add atomic modesetting support
- Add iommu support
- Consolidate drm driver initialization
- and MIC, DECON and MIPI-DSI support for exynos5433
omapdrm:
- atomic modesetting support (fixes lots of things in rewrite)
tegra:
- DP aux transaction fixes
- iommu support fix
msm:
- adreno a306 support
- various dsi bits
- various 64-bit fixes
- NV12MT support
rcar-du:
- atomic and misc fixes
sti:
- fix HDMI timing complaince
tilcdc:
- use drm component API to access tda998x driver
- fix module unloading
qxl:
- stability fixes"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (872 commits)
drm/nouveau: Pause between setting gpu to D3hot and cutting the power
drm/dp/mst: close deadlock in connector destruction.
drm: Always enable atomic API
drm/vgem: Set unique to "vgem"
of: fix a build error to of_graph_get_endpoint_by_regs function
drm/dp/mst: take lock around looking up the branch device on hpd irq
drm/dp/mst: make sure mst_primary mstb is valid in work function
of: add EXPORT_SYMBOL for of_graph_get_endpoint_by_regs
ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi'
drm/atomic: Don't set crtc_state->enable manually
drm/exynos: dsi: do not set TE GPIO direction by input
drm/exynos: dsi: add support for MIC driver as a bridge
drm/exynos: dsi: add support for Exynos5433
drm/exynos: dsi: make use of array for clock access
drm/exynos: dsi: make use of driver data for static values
drm/exynos: dsi: add macros for register access
drm/exynos: dsi: rename pll_clk to sclk_clk
drm/exynos: mic: add MIC driver
of: add helper for getting endpoint node of specific identifiers
drm/exynos: add Exynos5433 decon driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Lots of improvements at the DVB API DocBook documentation. Now, the
frontend and the network APIs are fully in sync with the Kernel and
looks more like the rest of the media documentation;
- New frontend driver: cx24120
- New driver for a PCI device: cobalt. This driver is actually not
sold in the market, but it is a good example of a multi-HDMI input
device;
- The dt3155 driver were promoted from staging;
- The mantis driver got remote controller support;
- New V4L2 driver for ST bdisp SoC chipsets;
- Make sparse and smatch happier: several bugs were solved by fixing
the issues reported by those static code analyzers.
- Lots of new device additions, new features, improvements and cleanups
at the existing drivers.
* tag 'media/v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (553 commits)
[media] lmedm04: fix the range for relative measurements
[media] lmedm04: use u32 instead of u64 for relative stats
[media] omap3isp: remove unused var
[media] saa7134: fix page size on some archs
[media] use CONFIG_PM_SLEEP for suspend/resume
[media] tuner-i2c: be consistent with I2C declaration
[media] si470x: cleanup define namespace
[media] bdisp: prevent compiling on random arch
[media] vb2: Don't WARN when v4l2_buffer.bytesused is 0 for multiplanar buffers
[media] MAINTAINERS: Add entry for the Renesas VSP1 driver
[media] videodev2.h: fix copy-and-paste error in V4L2_MAP_XFER_FUNC_DEFAULT
[media] Revert "[media] vb2: Push mmap_sem down to memops"
[media] mantis: cleanup a warning
[media] bdisp-debug: don't try to divide by s64
[media] cx88: don't declare restart_video_queue if not used
[media] au0828: move dev->boards atribuition to happen earlier
[media] lmedm04: implement dvb v5 statistics
[media] bdisp: remove unused var
[media] bdisp: remove needless check
ts2020: fix compilation on i386
...
|
|
Relative measurements are typically between 0 and 0xffff. However,
for some tuners (TUNER_S7395 and TUNER_S0194), the range were from
0 to 0xff00, with means that 100% is never archived.
Also, TUNER_RS2000 uses a more complex math.
So, create a macro that does the conversion using bit operations
and use it for all conversions.
The code is also easier to read with is a bonus.
While here, remove a bogus comment.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Cleanup this sparse warning:
drivers/media/usb/dvb-usb-v2/lmedm04.c:302 lme2510_update_stats() warn: should '((255 - st->signal_sn - 161) * 3) << 8' be a 64 bit type?
Both c_tmp and s_tmp actually stores a u16 stat. Using a u64 data
there is a waste, specially on u32 archs, as 64 ints there are more
expensive.
So, change the types to u32 and do the typecast only when storing
the result.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/platform/omap3isp/isppreview.c:932:6: warning: variable ‘features’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
On some archs, like tile, the PAGE_SIZE is not 4K. In the case
of tile arch, it can be either 16KB or 64KB.
Due to that, a warning is produced:
drivers/media/pci/saa7134/saa7134.h:678:43: warning: large integer implicitly truncated to unsigned type [-Woverflow]
This is actually an error, as it will write trach to the DMA size
registers. The logic at saa7134-ts already does the right thing:
saa_writeb(SAA7134_TS_DMA0, ((dev->ts.nr_packets-1)&0xff));
saa_writeb(SAA7134_TS_DMA1, (((dev->ts.nr_packets-1)>>8)&0xff));
/* TSNOPIT=0, TSCOLAP=0 */
saa_writeb(SAA7134_TS_DMA2,
((((dev->ts.nr_packets-1)>>16)&0x3f) | 0x00));
So, fix the driver to take larger page sizes into account.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Using CONFIG_PM_SLEEP suppress the warnings when the driver is
compiled without PM sleep functions:
drivers/media/rc/st_rc.c:338:12: warning: ‘st_rc_suspend’ defined but not used [-Wunused-function]
drivers/media/rc/st_rc.c:359:12: warning: ‘st_rc_resume’ defined but not used [-Wunused-function]
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
"As usual, mostly comment, kerneldoc and printk() fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
lpfc: Grammar s/an negative/a negative/
ARM: lib/lib1funcs.S: fix typo s/substractions/subtractions/
cx25821: cx25821-medusa-reg.h: fix 0x0x prefix
lib: crc-itu-t.[ch] fix 0x0x prefix in integer constants
rapidio: Fix kerneldoc and comment
qla4xxx: Fix printk() in qla4_83xx_read_reset_template() and qla4_83xx_pre_loopback_config()
treewide: Kconfig: fix wording / spelling
usb/serial: fix grammar in Kconfig help text for FTDI_SIO
megaraid_sas: fix kerneldoc
netfilter: ebtables: fix comment grammar
drm/radeon: fix comment
isdn: fix grammar in comment
ARM: KVM: fix comment
|
|
On alpha, gcc warns a log about signed/unsigned ballance, with
produces 3185 warnings. Ok, this is bogus, but it indicates that
the declaration at V4L2 side is not consistent with the one at
I2C.
With this trivial patch, the number of errors reduce to 2959
warnings. Still too much, but it is 7.1% less. So let's do it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Ingo Molnar:
"There were so many changes in the x86/asm, x86/apic and x86/mm topics
in this cycle that the topical separation of -tip broke down somewhat -
so the result is a more traditional architecture pull request,
collected into the 'x86/core' topic.
The topics were still maintained separately as far as possible, so
bisectability and conceptual separation should still be pretty good -
but there were a handful of merge points to avoid excessive
dependencies (and conflicts) that would have been poorly tested in the
end.
The next cycle will hopefully be much more quiet (or at least will
have fewer dependencies).
The main changes in this cycle were:
* x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
Gleixner)
- This is the second and most intrusive part of changes to the x86
interrupt handling - full conversion to hierarchical interrupt
domains:
[IOAPIC domain] -----
|
[MSI domain] --------[Remapping domain] ----- [ Vector domain ]
| (optional) |
[HPET MSI domain] ----- |
|
[DMAR domain] -----------------------------
|
[Legacy domain] -----------------------------
This now reflects the actual hardware and allowed us to distangle
the domain specific code from the underlying parent domain, which
can be optional in the case of interrupt remapping. It's a clear
separation of functionality and removes quite some duct tape
constructs which plugged the remap code between ioapic/msi/hpet
and the vector management.
- Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
injection into guests (Feng Wu)
* x86/asm changes:
- Tons of cleanups and small speedups, micro-optimizations. This
is in preparation to move a good chunk of the low level entry
code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
Brian Gerst)
- Moved all system entry related code to a new home under
arch/x86/entry/ (Ingo Molnar)
- Removal of the fragile and ugly CFI dwarf debuginfo annotations.
Conversion to C will reintroduce many of them - but meanwhile
they are only getting in the way, and the upstream kernel does
not rely on them (Ingo Molnar)
- NOP handling refinements. (Borislav Petkov)
* x86/mm changes:
- Big PAT and MTRR rework: making the code more robust and
preparing to phase out exposing direct MTRR interfaces to drivers -
in favor of using PAT driven interfaces (Toshi Kani, Luis R
Rodriguez, Borislav Petkov)
- New ioremap_wt()/set_memory_wt() interfaces to support
Write-Through cached memory mappings. This is especially
important for good performance on NVDIMM hardware (Toshi Kani)
* x86/ras changes:
- Add support for deferred errors on AMD (Aravind Gopalakrishnan)
This is an important RAS feature which adds hardware support for
poisoned data. That means roughly that the hardware marks data
which it has detected as corrupted but wasn't able to correct, as
poisoned data and raises an APIC interrupt to signal that in the
form of a deferred error. It is the OS's responsibility then to
take proper recovery action and thus prolonge system lifetime as
far as possible.
- Add support for Intel "Local MCE"s: upcoming CPUs will support
CPU-local MCE interrupts, as opposed to the traditional system-
wide broadcasted MCE interrupts (Ashok Raj)
- Misc cleanups (Borislav Petkov)
* x86/platform changes:
- Intel Atom SoC updates
... and lots of other cleanups, fixlets and other changes - see the
shortlog and the Git log for details"
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
x86/hpet: Use proper hpet device number for MSI allocation
x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
genirq: Prevent crash in irq_move_irq()
genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
iommu, x86: Properly handle posted interrupts for IOMMU hotplug
iommu, x86: Provide irq_remapping_cap() interface
iommu, x86: Setup Posted-Interrupts capability for Intel iommu
iommu, x86: Add cap_pi_support() to detect VT-d PI capability
iommu, x86: Avoid migrating VT-d posted interrupts
iommu, x86: Save the mode (posted or remapped) of an IRTE
iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
iommu: dmar: Provide helper to copy shared irte fields
iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
iommu: Add new member capability to struct irq_remap_ops
x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
...
|
|
This patch adds helper functions for registering/unregistering
LED Flash class devices as V4L2 sub-devices. The functions should
be called from the LED subsystem device driver. In case the
support for V4L2 Flash sub-devices is disabled in the kernel
config the functions' empty versions will be used.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
|
|
Some architectures already use CHIPID defines:
drivers/media/radio/si470x/radio-si470x.h:57:0: warning: "CHIPID" redefined [enabled by default]
drivers/media/radio/si470x/radio-si470x.h:57:0: warning: "CHIPID" redefined [enabled by default]
drivers/media/radio/si470x/radio-si470x.h:57:0: warning: "CHIPID" redefined [enabled by default]
So, use SI_foo namespace to avoid conflicts.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This driver requires support for DMA attrs function, and not
just DMA. Change the options accordingly to remove those errors:
/devel/v4l/to_next/drivers/media/platform/sti/bdisp/bdisp-hw.c: In function ‘bdisp_hw_free_nodes’:
/devel/v4l/to_next/drivers/media/platform/sti/bdisp/bdisp-hw.c:132:3: error: implicit declaration of function ‘dma_free_attrs’ [-Werror=implicit-function-declaration]
dma_free_attrs(ctx->bdisp_dev->dev,
^
/devel/v4l/to_next/drivers/media/platform/sti/bdisp/bdisp-hw.c: In function ‘bdisp_hw_alloc_nodes’:
/devel/v4l/to_next/drivers/media/platform/sti/bdisp/bdisp-hw.c:157:9: error: implicit declaration of function ‘dma_alloc_attrs’ [-Werror=implicit-function-declaration]
base = dma_alloc_attrs(dev, node_size * MAX_NB_NODE, &paddr,
^
/devel/v4l/to_next/drivers/media/platform/sti/bdisp/bdisp-hw.c:157:7: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
base = dma_alloc_attrs(dev, node_size * MAX_NB_NODE, &paddr,
^
/devel/v4l/to_next/drivers/media/platform/sti/bdisp/bdisp-hw.c: In function ‘bdisp_hw_alloc_filters’:
/devel/v4l/to_next/drivers/media/platform/sti/bdisp/bdisp-hw.c:219:7: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
base = dma_alloc_attrs(dev, size, &paddr, GFP_KERNEL | GFP_DMA, &attrs);
Also, get rid of bogus, unused and duplicated symbol declaration
for the config option done at bdisp/Kconfig.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Commit f61bf13b6a07 ("[media] vb2: add allow_zero_bytesused flag to the
vb2_queue struct") added a WARN_ONCE to catch usage of a deprecated API
using a zero value for v4l2_buffer.bytesused.
However, the condition is checked incorrectly, as the v4L2_buffer
bytesused field is supposed to be ignored for multiplanar buffers. This
results in spurious warnings when using the multiplanar API.
Fix it by checking v4l2_buffer.bytesused for uniplanar buffers and
v4l2_plane.bytesused for multiplanar buffers.
Fixes: f61bf13b6a07 ("[media] vb2: add allow_zero_bytesused flag to the vb2_queue struct")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: stable@vger.kernel.org # for v4.0
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This reverts commit 48b25a3a713b90988b6882d318f7c0a6bed9aabc.
That commit caused two regressions. The first is a BUG:
Jun 14 18:42:15 test-media kernel: [ 115.972299] BUG: unable to handle kernel NULL pointer dereference at 0000000000000100
Jun 14 18:42:15 test-media kernel: [ 115.972307] IP: [<ffffffff810d5cd0>] __lock_acquire+0x2f0/0x2070
Jun 14 18:42:15 test-media kernel: [ 115.972316] PGD 0
Jun 14 18:42:15 test-media kernel: [ 115.972318] Oops: 0000 [#1] PREEMPT SMP
Jun 14 18:42:15 test-media kernel: [ 115.972321] Modules linked in: vivid v4l2_dv_timings videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media vmw_balloon vmw_vmci acpi_cpufreq processor button
Jun 14 18:42:15 test-media kernel: [ 115.972333] CPU: 0 PID: 1542 Comm: v4l2-ctl Not tainted 4.1.0-rc3-test-media #1190
Jun 14 18:42:15 test-media kernel: [ 115.972336] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014
Jun 14 18:42:15 test-media kernel: [ 115.972337] task: ffff880220ce4200 ti: ffff88021d16c000 task.ti: ffff88021d16c000
Jun 14 18:42:15 test-media kernel: [ 115.972339] RIP: 0010:[<ffffffff810d5cd0>] [<ffffffff810d5cd0>] __lock_acquire+0x2f0/0x2070
Jun 14 18:42:15 test-media kernel: [ 115.972342] RSP: 0018:ffff88021d16f9b8 EFLAGS: 00010002
Jun 14 18:42:15 test-media kernel: [ 115.972343] RAX: 0000000000000046 RBX: 0000000000000292 RCX: 0000000000000001
Jun 14 18:42:15 test-media kernel: [ 115.972345] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000100
Jun 14 18:42:15 test-media kernel: [ 115.972346] RBP: ffff88021d16fa88 R08: 0000000000000001 R09: 0000000000000000
Jun 14 18:42:15 test-media kernel: [ 115.972347] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000001
Jun 14 18:42:15 test-media kernel: [ 115.972348] R13: ffff880220ce4200 R14: 0000000000000100 R15: 0000000000000000
Jun 14 18:42:15 test-media kernel: [ 115.972350] FS: 00007f2441e7f740(0000) GS:ffff880236e00000(0000) knlGS:0000000000000000
Jun 14 18:42:15 test-media kernel: [ 115.972351] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Jun 14 18:42:15 test-media kernel: [ 115.972353] CR2: 0000000000000100 CR3: 0000000001e0b000 CR4: 00000000001406f0
Jun 14 18:42:15 test-media kernel: [ 115.972424] Stack:
Jun 14 18:42:15 test-media kernel: [ 115.972427] ffff88021d16fa98 ffffffff810d6543 0000000000000006 0000000000000246
Jun 14 18:42:15 test-media kernel: [ 115.972431] ffff88021d16fa08 ffffffff810d532d ffff880220ce4a78 ffff880200000000
Jun 14 18:42:15 test-media kernel: [ 115.972433] ffff880200000001 0000000000000000 0000000000000001 000000000093a4a0
Jun 14 18:42:15 test-media kernel: [ 115.972436] Call Trace:
Jun 14 18:42:15 test-media kernel: [ 115.972440] [<ffffffff810d6543>] ? __lock_acquire+0xb63/0x2070
Jun 14 18:42:15 test-media kernel: [ 115.972443] [<ffffffff810d532d>] ? mark_held_locks+0x6d/0xa0
Jun 14 18:42:15 test-media kernel: [ 115.972445] [<ffffffff810d37a8>] ? __lock_is_held+0x58/0x80
Jun 14 18:42:15 test-media kernel: [ 115.972447] [<ffffffff810d852c>] lock_acquire+0x6c/0xa0
Jun 14 18:42:15 test-media kernel: [ 115.972452] [<ffffffffa039f1f6>] ? vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:42:15 test-media kernel: [ 115.972458] [<ffffffff819b1a92>] down_read+0x42/0x60
Jun 14 18:42:15 test-media kernel: [ 115.972460] [<ffffffffa039f1f6>] ? vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:42:15 test-media kernel: [ 115.972463] [<ffffffff819af1b1>] ? mutex_lock_nested+0x2b1/0x560
Jun 14 18:42:15 test-media kernel: [ 115.972467] [<ffffffffa038fdc5>] ? vb2_queue_release+0x25/0x40 [videobuf2_core]
Jun 14 18:42:15 test-media kernel: [ 115.972469] [<ffffffffa039f1f6>] vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:42:15 test-media kernel: [ 115.972472] [<ffffffffa038b626>] __vb2_queue_free+0x146/0x5e0 [videobuf2_core]
Jun 14 18:42:15 test-media kernel: [ 115.972475] [<ffffffffa038fdd3>] vb2_queue_release+0x33/0x40 [videobuf2_core]
Jun 14 18:42:15 test-media kernel: [ 115.972478] [<ffffffffa038fe75>] _vb2_fop_release+0x95/0xb0 [videobuf2_core]
Jun 14 18:42:15 test-media kernel: [ 115.972481] [<ffffffffa038feb9>] vb2_fop_release+0x29/0x50 [videobuf2_core]
Jun 14 18:42:15 test-media kernel: [ 115.972485] [<ffffffffa03ad372>] vivid_fop_release+0x92/0x230 [vivid]
Jun 14 18:42:15 test-media kernel: [ 115.972491] [<ffffffffa0358460>] v4l2_release+0x30/0x80 [videodev]
Jun 14 18:42:15 test-media kernel: [ 115.972496] [<ffffffff811a51d5>] __fput+0xe5/0x200
Jun 14 18:42:15 test-media kernel: [ 115.972498] [<ffffffff811a5339>] ____fput+0x9/0x10
Jun 14 18:42:15 test-media kernel: [ 115.972501] [<ffffffff810a9fa4>] task_work_run+0xc4/0xf0
Jun 14 18:42:15 test-media kernel: [ 115.972504] [<ffffffff8108c670>] do_exit+0x3a0/0xaf0
Jun 14 18:42:15 test-media kernel: [ 115.972507] [<ffffffff819b3a9b>] ? _raw_spin_unlock_irq+0x2b/0x60
Jun 14 18:42:15 test-media kernel: [ 115.972509] [<ffffffff8108e0ff>] do_group_exit+0x4f/0xe0
Jun 14 18:42:15 test-media kernel: [ 115.972511] [<ffffffff8109a170>] get_signal+0x200/0x8c0
Jun 14 18:42:15 test-media kernel: [ 115.972514] [<ffffffff819b14b5>] ? __mutex_unlock_slowpath+0xf5/0x240
Jun 14 18:42:15 test-media kernel: [ 115.972518] [<ffffffff81002593>] do_signal+0x23/0x820
Jun 14 18:42:15 test-media kernel: [ 115.972521] [<ffffffff819b1609>] ? mutex_unlock+0x9/0x10
Jun 14 18:42:15 test-media kernel: [ 115.972524] [<ffffffffa0358648>] ? v4l2_ioctl+0x78/0xf0 [videodev]
Jun 14 18:42:15 test-media kernel: [ 115.972526] [<ffffffff819b4653>] ? int_very_careful+0x5/0x46
Jun 14 18:42:15 test-media kernel: [ 115.972529] [<ffffffff810d54bd>] ? trace_hardirqs_on_caller+0x15d/0x200
Jun 14 18:42:15 test-media kernel: [ 115.972531] [<ffffffff81002de0>] do_notify_resume+0x50/0x60
Jun 14 18:42:15 test-media kernel: [ 115.972533] [<ffffffff819b46a6>] int_signal+0x12/0x17
Jun 14 18:42:15 test-media kernel: [ 115.972534] Code: ca 81 31 c0 e8 7a e2 8c 00 e8 aa 1d 8d 00 0f 1f 44 00 00 31 db 48 81 c4 a8 00 00 00 89 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 90 <49> 81 3e 40 4e 02 82 b8 00 00 00 00 44 0f 44 e0 41 83 ff 01 0f
Jun 14 18:42:15 test-media kernel: [ 115.972567] RIP [<ffffffff810d5cd0>] __lock_acquire+0x2f0/0x2070
Jun 14 18:42:15 test-media kernel: [ 115.972569] RSP <ffff88021d16f9b8>
Jun 14 18:42:15 test-media kernel: [ 115.972570] CR2: 0000000000000100
Jun 14 18:42:15 test-media kernel: [ 115.972573] ---[ end trace 25595c2b8560cb57 ]---
Jun 14 18:42:15 test-media kernel: [ 115.972575] Fixing recursive fault but reboot is needed!
This can be reproduced by loading the vivid driver and running:
v4l2-ctl --stream-user
and pressing Ctrl-C. You may have to try a few times, but in my experience this BUG
is triggered quite quickly.
The second is a possible deadlock:
Jun 14 18:44:07 test-media kernel: [ 49.376650] ======================================================
Jun 14 18:44:07 test-media kernel: [ 49.376651] [ INFO: possible circular locking dependency detected ]
Jun 14 18:44:07 test-media kernel: [ 49.376653] 4.1.0-rc3-test-media #1190 Not tainted
Jun 14 18:44:07 test-media kernel: [ 49.376654] -------------------------------------------------------
Jun 14 18:44:07 test-media kernel: [ 49.376655] v4l2-compliance/1468 is trying to acquire lock:
Jun 14 18:44:07 test-media kernel: [ 49.376657] (&mm->mmap_sem){++++++}, at: [<ffffffffa03a81f6>] vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:44:07 test-media kernel: [ 49.376665]
Jun 14 18:44:07 test-media kernel: [ 49.376665] but task is already holding lock:
Jun 14 18:44:07 test-media kernel: [ 49.376666] (&q->mmap_lock){+.+...}, at: [<ffffffffa0398dc5>] vb2_queue_release+0x25/0x40 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376670]
Jun 14 18:44:07 test-media kernel: [ 49.376670] which lock already depends on the new lock.
Jun 14 18:44:07 test-media kernel: [ 49.376670]
Jun 14 18:44:07 test-media kernel: [ 49.376671]
Jun 14 18:44:07 test-media kernel: [ 49.376671] the existing dependency chain (in reverse order) is:
Jun 14 18:44:07 test-media kernel: [ 49.376672]
Jun 14 18:44:07 test-media kernel: [ 49.376672] -> #1 (&q->mmap_lock){+.+...}:
Jun 14 18:44:07 test-media kernel: [ 49.376675] [<ffffffff810d852c>] lock_acquire+0x6c/0xa0
Jun 14 18:44:07 test-media kernel: [ 49.376682] [<ffffffff819aef5e>] mutex_lock_nested+0x5e/0x560
Jun 14 18:44:07 test-media kernel: [ 49.376689] [<ffffffffa03934a2>] vb2_mmap+0x232/0x350 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376691] [<ffffffffa0395a60>] vb2_fop_mmap+0x20/0x30 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376694] [<ffffffffa0361102>] v4l2_mmap+0x52/0x90 [videodev]
Jun 14 18:44:07 test-media kernel: [ 49.376698] [<ffffffff81177e33>] mmap_region+0x3b3/0x5e0
Jun 14 18:44:07 test-media kernel: [ 49.376701] [<ffffffff81178377>] do_mmap_pgoff+0x317/0x400
Jun 14 18:44:07 test-media kernel: [ 49.376703] [<ffffffff81165320>] vm_mmap_pgoff+0x90/0xc0
Jun 14 18:44:07 test-media kernel: [ 49.376708] [<ffffffff81176867>] SyS_mmap_pgoff+0x1d7/0x280
Jun 14 18:44:07 test-media kernel: [ 49.376709] [<ffffffff81007f8d>] SyS_mmap+0x1d/0x20
Jun 14 18:44:07 test-media kernel: [ 49.376714] [<ffffffff819b44ae>] system_call_fastpath+0x12/0x76
Jun 14 18:44:07 test-media kernel: [ 49.376716]
Jun 14 18:44:07 test-media kernel: [ 49.376716] -> #0 (&mm->mmap_sem){++++++}:
Jun 14 18:44:07 test-media kernel: [ 49.376718] [<ffffffff810d79b3>] __lock_acquire+0x1fd3/0x2070
Jun 14 18:44:07 test-media kernel: [ 49.376720] [<ffffffff810d852c>] lock_acquire+0x6c/0xa0
Jun 14 18:44:07 test-media kernel: [ 49.376721] [<ffffffff819b1a92>] down_read+0x42/0x60
Jun 14 18:44:07 test-media kernel: [ 49.376723] [<ffffffffa03a81f6>] vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:44:07 test-media kernel: [ 49.376725] [<ffffffffa0394626>] __vb2_queue_free+0x146/0x5e0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376727] [<ffffffffa0398dd3>] vb2_queue_release+0x33/0x40 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376729] [<ffffffffa0398e75>] _vb2_fop_release+0x95/0xb0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376731] [<ffffffffa0398eb9>] vb2_fop_release+0x29/0x50 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376733] [<ffffffffa03b6372>] vivid_fop_release+0x92/0x230 [vivid]
Jun 14 18:44:07 test-media kernel: [ 49.376737] [<ffffffffa0361460>] v4l2_release+0x30/0x80 [videodev]
Jun 14 18:44:07 test-media kernel: [ 49.376739] [<ffffffff811a51d5>] __fput+0xe5/0x200
Jun 14 18:44:07 test-media kernel: [ 49.376744] [<ffffffff811a5339>] ____fput+0x9/0x10
Jun 14 18:44:07 test-media kernel: [ 49.376746] [<ffffffff810a9fa4>] task_work_run+0xc4/0xf0
Jun 14 18:44:07 test-media kernel: [ 49.376749] [<ffffffff81002dd1>] do_notify_resume+0x41/0x60
Jun 14 18:44:07 test-media kernel: [ 49.376752] [<ffffffff819b46a6>] int_signal+0x12/0x17
Jun 14 18:44:07 test-media kernel: [ 49.376754]
Jun 14 18:44:07 test-media kernel: [ 49.376754] other info that might help us debug this:
Jun 14 18:44:07 test-media kernel: [ 49.376754]
Jun 14 18:44:07 test-media kernel: [ 49.376755] Possible unsafe locking scenario:
Jun 14 18:44:07 test-media kernel: [ 49.376755]
Jun 14 18:44:07 test-media kernel: [ 49.376756] CPU0 CPU1
Jun 14 18:44:07 test-media kernel: [ 49.376757] ---- ----
Jun 14 18:44:07 test-media kernel: [ 49.376758] lock(&q->mmap_lock);
Jun 14 18:44:07 test-media kernel: [ 49.376759] lock(&mm->mmap_sem);
Jun 14 18:44:07 test-media kernel: [ 49.376760] lock(&q->mmap_lock);
Jun 14 18:44:07 test-media kernel: [ 49.376761] lock(&mm->mmap_sem);
Jun 14 18:44:07 test-media kernel: [ 49.376763]
Jun 14 18:44:07 test-media kernel: [ 49.376763] *** DEADLOCK ***
Jun 14 18:44:07 test-media kernel: [ 49.376763]
Jun 14 18:44:07 test-media kernel: [ 49.376764] 2 locks held by v4l2-compliance/1468:
Jun 14 18:44:07 test-media kernel: [ 49.376765] #0: (&dev->mutex#3){+.+.+.}, at: [<ffffffffa0398e0a>] _vb2_fop_release+0x2a/0xb0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376770] #1: (&q->mmap_lock){+.+...}, at: [<ffffffffa0398dc5>] vb2_queue_release+0x25/0x40 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376773]
Jun 14 18:44:07 test-media kernel: [ 49.376773] stack backtrace:
Jun 14 18:44:07 test-media kernel: [ 49.376776] CPU: 2 PID: 1468 Comm: v4l2-compliance Not tainted 4.1.0-rc3-test-media #1190
Jun 14 18:44:07 test-media kernel: [ 49.376777] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014
Jun 14 18:44:07 test-media kernel: [ 49.376779] ffffffff8279e0b0 ffff88021d6f7ba8 ffffffff819a7aac 0000000000000011
Jun 14 18:44:07 test-media kernel: [ 49.376781] ffffffff8279e0b0 ffff88021d6f7bf8 ffffffff819a3964 ffff88021d6f7bd8
Jun 14 18:44:07 test-media kernel: [ 49.376783] ffff8800ac8aa100 0000000000000002 ffff8800ac8aa9a0 0000000000000002
Jun 14 18:44:07 test-media kernel: [ 49.376785] Call Trace:
Jun 14 18:44:07 test-media kernel: [ 49.376788] [<ffffffff819a7aac>] dump_stack+0x4f/0x7b
Jun 14 18:44:07 test-media kernel: [ 49.376792] [<ffffffff819a3964>] print_circular_bug+0x20f/0x251
Jun 14 18:44:07 test-media kernel: [ 49.376793] [<ffffffff810d79b3>] __lock_acquire+0x1fd3/0x2070
Jun 14 18:44:07 test-media kernel: [ 49.376795] [<ffffffff810d6543>] ? __lock_acquire+0xb63/0x2070
Jun 14 18:44:07 test-media kernel: [ 49.376797] [<ffffffff810d37a8>] ? __lock_is_held+0x58/0x80
Jun 14 18:44:07 test-media kernel: [ 49.376798] [<ffffffff810d852c>] lock_acquire+0x6c/0xa0
Jun 14 18:44:07 test-media kernel: [ 49.376800] [<ffffffffa03a81f6>] ? vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:44:07 test-media kernel: [ 49.376802] [<ffffffff819b1a92>] down_read+0x42/0x60
Jun 14 18:44:07 test-media kernel: [ 49.376803] [<ffffffffa03a81f6>] ? vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:44:07 test-media kernel: [ 49.376805] [<ffffffff819af1b1>] ? mutex_lock_nested+0x2b1/0x560
Jun 14 18:44:07 test-media kernel: [ 49.376807] [<ffffffffa0398dc5>] ? vb2_queue_release+0x25/0x40 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376808] [<ffffffffa03a81f6>] vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:44:07 test-media kernel: [ 49.376810] [<ffffffffa0398e0a>] ? _vb2_fop_release+0x2a/0xb0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376812] [<ffffffffa0394626>] __vb2_queue_free+0x146/0x5e0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376814] [<ffffffffa0398dd3>] vb2_queue_release+0x33/0x40 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376816] [<ffffffffa0398e75>] _vb2_fop_release+0x95/0xb0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376818] [<ffffffffa0398eb9>] vb2_fop_release+0x29/0x50 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376820] [<ffffffffa03b6372>] vivid_fop_release+0x92/0x230 [vivid]
Jun 14 18:44:07 test-media kernel: [ 49.376822] [<ffffffffa0361460>] v4l2_release+0x30/0x80 [videodev]
Jun 14 18:44:07 test-media kernel: [ 49.376824] [<ffffffff811a51d5>] __fput+0xe5/0x200
Jun 14 18:44:07 test-media kernel: [ 49.376825] [<ffffffff819b4653>] ? int_very_careful+0x5/0x46
Jun 14 18:44:07 test-media kernel: [ 49.376827] [<ffffffff811a5339>] ____fput+0x9/0x10
Jun 14 18:44:07 test-media kernel: [ 49.376828] [<ffffffff810a9fa4>] task_work_run+0xc4/0xf0
Jun 14 18:44:07 test-media kernel: [ 49.376830] [<ffffffff81002dd1>] do_notify_resume+0x41/0x60
Jun 14 18:44:07 test-media kernel: [ 49.376832] [<ffffffff819b46a6>] int_signal+0x12/0x17
This can be triggered by loading the vivid module with the module option 'no_error_inj=1'
and running 'v4l2-compliance -s5'. Again, it may take a few attempts to trigger this
but for me it happens quite quickly.
Without this patch I cannot reproduce these two issues. So reverting is the best
solution for now.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/pci/mantis/mantis_i2c.c: In function 'mantis_i2c_init':
drivers/media/pci/mantis/mantis_i2c.c:222:15: warning: variable 'intmask' set but not used [-Wunused-but-set-variable]
u32 intstat, intmask;
|
|
We are burrying direct access to MTRR code support on
x86 in order to take advantage of PAT. In the future, we
also want to make the default behavior of ioremap_nocache()
to use strong UC, at which point the use of mtrr_add() on
those systems would make write-combining void.
In order to help both enable us to later make strong
UC default and in order to phase out direct MTRR access
code, port the driver over to the arch_phys_wc_add() API
and annotate that the device driver requires systems to
boot with PAT disabled, with the 'nopat' kernel parameter.
This is a workable compromise given that the hardware is
really rare these days, and perhaps only some lost souls
stuck with obsolete hardware are expected to be using this
feature of the device driver.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Stefan Bader <stefan.bader@canonical.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ville Syrjälä <syrjala@sci.fi>
Cc: bhelgaas@google.com
Cc: konrad.wilk@oracle.com
Cc: linux-media@vger.kernel.org
Cc: tomi.valkeinen@ti.com
Cc: toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1434053994-2196-2-git-send-email-mcgrof@do-not-panic.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since when we start discussions about the usage Media Controller for
complex hardware, one thing become clear: the way it is, MC fails to
map anything different than capture/output/m2m video-only streaming.
The point is that MC has entities named as devnodes, but the only
devnode used (before the DVB patches) is MEDIA_ENT_T_DEVNODE_V4L.
Due to the way MC got implemented, however, this entity actually
doesn't represent the devnode, but the hardware I/O engine that
receives data via DMA.
By coincidence, such DMA is associated with the V4L device node
on webcam hardware, but this is not true even for other V4L2
devices. For example, on USB hardware, the DMA is done via the
USB controller. The data passes though a in-kernel filter that
strips off the URB headers. Other V4L2 devices like radio may not
even have DMA. When it have, the DMA is done via ALSA, and not
via the V4L devnode.
In other words, MC is broken as a whole, but tagging it as BROKEN
right now would do more harm than good.
So, instead, let's mark, for now, the DVB part as broken and
block all new changes to MC while we fix this mess, whith
we hopefully will do for the next Kernel version.
Requested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
V4L2 async sub-devices are currently matched (OF case) based on the struct
device_node pointer in struct device. LED devices may have more than one
LED, and in that case the OF node to match is not directly the device's
node, but a LED's node.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
|
|
There are several warnings there, on some architectures, related
to dividing a s32 by a s64 value:
drivers/media/platform/sti/bdisp/bdisp-debug.c:594: warning: comparison of distinct pointer types lacks a cast
drivers/media/platform/sti/bdisp/bdisp-debug.c:594: warning: right shift count >= width of type
drivers/media/platform/sti/bdisp/bdisp-debug.c:594: warning: passing argument 1 of '__div64_32' from incompatible pointer type
drivers/media/platform/sti/bdisp/bdisp-debug.c:595: warning: comparison of distinct pointer types lacks a cast
drivers/media/platform/sti/bdisp/bdisp-debug.c:595: warning: right shift count >= width of type
drivers/media/platform/sti/bdisp/bdisp-debug.c:595: warning: passing argument 1 of '__div64_32' from incompatible pointer type CC [M] drivers/media/tuners/mt2060.o
drivers/media/platform/sti/bdisp/bdisp-debug.c:596: warning: comparison of distinct pointer types lacks a cast
drivers/media/platform/sti/bdisp/bdisp-debug.c:596: warning: right shift count >= width of type
drivers/media/platform/sti/bdisp/bdisp-debug.c:596: warning: passing argument 1 of '__div64_32' from incompatible pointer type
drivers/media/platform/sti/bdisp/bdisp-debug.c:597: warning: comparison of distinct pointer types lacks a cast
drivers/media/platform/sti/bdisp/bdisp-debug.c:597: warning: right shift count >= width of type
drivers/media/platform/sti/bdisp/bdisp-debug.c:597: warning: passing argument 1 of '__div64_32' from incompatible pointer type
That doesn't make much sense. What the driver is actually trying
to do is to divide one second by a value. So, check the range
before dividing. That warrants the right result and will remove
the warnings on non-64 bits archs.
Also fixes this warning:
drivers/media/platform/sti/bdisp/bdisp-debug.c:588: warning: comparison of distinct pointer types lacks a cast
by using div64_s64() instead of calling do_div() directly.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
While compiled on alpha, got this error:
drivers/media/pci/cx88/cx88-video.c:415:12: warning: 'restart_video_queue' defined but not used [-Wunused-function]
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The attribution of dev->boards occured too late, which
would couse an OOPS in media controller registration.
Signed-off-by: Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Indroduce function lme2510_update_stats to update
statistics directly from usb interrupt.
Provide signal and snr wrap rounds for dvb v3 functions.
Block and post bit are not available.
When i2c_talk_onoff is on no statistics are available,
with possible future hand over to the relevant frontend/tuner.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Fix the following warning:
drivers/media/platform/sti/bdisp/bdisp-v4l2.c: In function 'bdisp_register_device':
drivers/media/platform/sti/bdisp/bdisp-v4l2.c:1024:26: warning: variable 'pdev' set but not used [-Wunused-but-set-variable]
struct platform_device *pdev;
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As reported by smatch:
drivers/media/platform/sti/bdisp/bdisp-v4l2.c:947 bdisp_s_selection() warn: unsigned 'out.width' is never less than zero.
drivers/media/platform/sti/bdisp/bdisp-v4l2.c:947 bdisp_s_selection() warn: unsigned 'out.height' is never less than zero.
Indeed, width and height are unsigned.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/built-in.o: In function `ts2020_read_signal_strength':
ts2020.c:(.text+0x298ff94): undefined reference to `__divdi3'
ts2020.c:(.text+0x298ffd4): undefined reference to `__divdi3'
ts2020.c:(.text+0x298fffd): undefined reference to `__divdi3'
Makefile:921: recipe for target 'vmlinux' failed
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Commit a96762da0cfc('[media] mantis: add remote control support')
introduced some new CodingStyle issues. Fix them.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The embedded UART is apparently used to receive decoded IR (RC5?) codes.
Forward these scan codes to the RC framework and (where known) add
corresponding mapping tables to translate them into regular keys.
This patch has been tested on a TechniSat CableStar HD2. The mappings of other
rc-maps were taken from Christoph Pinkl's patch
(http://patchwork.linuxtv.org/patch/7217/) and the s2-liplianin repository. The
major difference to Christoph's patch is a reworked interrupt handling of the
UART because the RX interrupt is apparently level triggered and requires
masking until the FIFO is read by the UART worker.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This RC map was taken from Christoph Pinkl's patch
(http://patchwork.linuxtv.org/patch/7217/). It is used solely by the respective
mantis based card because the encoding is not known.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This RC map was taken from Christoph Pinkl's patch
(http://patchwork.linuxtv.org/patch/7217/). It is used solely by the respective
mantis based card because the encoding is not known.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This RC map was taken from Christoph Pinkl's patch
(http://patchwork.linuxtv.org/patch/7217/). It is used solely by the respective
mantis based card because the encoding is not known.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The TS35 remote is distributed with TechniSat CableStar HD2 cards (mantis
chipset). The exact protocol type is unknown, making this rc map probably only
usable by mantis cards.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Quite a few of the ->diseqc_send_master_cmd() implementations don't
check cmd->msg_len so it can lead to memory corruption.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This reverts commit ad90b6b0f10566d4a5546e27fe455ce3b5e6b6c7.
This patch breaks I2C communication towards Si2168. After reverting and
applying the other patch in this series the I2C communication is
correct.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The i2c_reg_len for Si2168 should be 0 for correct I2C communication.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
In little endian cases, macro cpu_to_be16 unfolds to __swab16 which
provides special case for constants. In big endian cases,
__constant_cpu_to_be16 and cpu_to_be16 expand directly to the
same expression. So, replace __constant_cpu_to_be16 with
cpu_to_be16 with the goal of getting rid of the definition of
__constant_cpu_to_be16 completely.
The semantic patch that performs this transformation is as follows:
@@expression x;@@
- __constant_cpu_to_be16(x)
+ cpu_to_be16(x)
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Following a change made to TS2020 tuner in patches
ts2020: Provide DVBv5 API signal strength
ts2020: Allow stats polling to be suppressed
Polling on the driver must be suppressed because
the demuxer is stopped by I2C messages.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Statistics polling can not be done by lmedm04 driver's implementation of
M88RS2000/TS2020 because I2C messages stop the device's demuxer, so allow
polling for statistics to be suppressed in the ts2020 driver by setting
dont_poll in the ts2020_config struct.
Reported-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Copy the loop_through setting from the ts2020_config struct to the internal
ts2020_priv struct so that it can actually be used.
Whilst we're at it, group the bitfields together in the same order in both
structs so that the compiler has a good chance to copy them in one go.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Provide a DVBv5 API signal strength. This is in units of 0.001 dBm rather
than a percentage.
>From Antti Palosaari's testing with a signal generator, it appears that the
gain calculated according to Montage's specification if negated is a
reasonable representation of the signal strength of the generator.
To this end:
(1) Polled statistic gathering needed to be implemented in the TS2020 driver.
This is done in the ts2020_stat_work() function.
(2) The calculated gain is placed as the signal strength in the
dtv_property_cache associated with the front end with the scale set to
FE_SCALE_DECIBEL.
(3) The DVBv3 format signal strength then needed to be calculated from the
signal strength stored in the dtv_property_cache rather than accessing
the value when ts2020_read_signal_strength() is called.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The TS2020 and TS2022 tuners take an input from the demodulator indicating the
AGC setting on that component that is then used to influence the tuner's own
gain. This should be taken into account when calculating the gain and signal
strength.
Further, the existing TS2020 driver miscalculates the signal strength as the
result of its calculations can exceed the storage capacity of the 16-bit word
used to return it to userspace.
To this end:
(1) Add a callback function (->get_agc_pwm()) in the ts2020_config struct that
the tuner can call to get the AGC PWM value from the demodulator.
(2) Modify the TS2020 driver to calculate the gain according to Montage's
specification with the adjustment that we produce a negative value and
scale it to 0.001dB units (which is what the DVBv5 API will require):
(a) Callback to the demodulator to retrieve the AGC PWM value and then
turn that into Vagc for incorporation in the calculations. If the
callback is unset, assume a Vagc of 0.
(b) Calculate the tuner gain from a combination of Vagc and the tuner's RF
gain and baseband gain settings.
(3) Turn this into a percentage signal strength as per Montage's
specification for return to userspace with the DVBv3 API.
(4) Provide a function in the M88DS3103 demodulator driver that can be used to
get the AGC PWM value on behalf of the tuner.
(5) The ts2020_config.get_agc_pwm function should be set by the code that
stitches together the drivers for each card.
For the DVBSky cards that use the M88DS3103 with the TS2020 or the TS2022,
set the get_agc_pwm function to point to m88ds3103_get_agc_pwm.
I have tested this with a DVBSky S952 card which has an M88DS3103 and a TS2022.
Thanks to Montage for providing access to information about the workings of
these parts.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Use I2C client binding for demod and SEC.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Use regmap for I2C register access.
Remove own I2C repeated mutex as it should not be needed. I2C adapter
lock is already taken when I2C mux adapter is called, no need for
double locking.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Rename driver state from priv to dev.
Use I2C client for correct logging.
Use adapter and address from I2C client structure where needed.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
ts2020_attach()
ts2020_attach() allocates a variable pdata on the stack and then passes a
pointer to it to i2c_new_device() which stashes the pointer in persistent
structures.
Add a comment to the effect that this isn't actually an error because the
contents of the variable are only used in ts2020_probe() and this is only
called ts2020_attach()'s stack frame exists.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
Luis R. Rodriguez
Linus Torvalds
Vladimir Zapolskiy
Mauro Carvalho Chehab
Jacek Anaszewski
Laurent Pinchart
Hans Verkuil
Sakari Ailus
Rafael Lourenço de Lima Chehab
Malcolm Priestley
Fabien Dessenne
Jan Klötzke
Dan Carpenter
Olli Salonen
Vaishali Thakkar
David Howells
Antti Palosaari