aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/rc
AgeCommit message (Collapse)Author
2020-02-14media: iguanair: fix endpoint sanity checkJohan Hovold
[ Upstream commit 1b257870a78b0a9ce98fdfb052c58542022ffb5b ] Make sure to use the current alternate setting, which need not be the first one by index, when verifying the endpoint descriptors and initialising the URBs. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 26ff63137c45 ("[media] Add support for the IguanaWorks USB IR Transceiver") Fixes: ab1cbdf159be ("media: iguanair: add sanity checks") Cc: stable <stable@vger.kernel.org> # 3.6 Cc: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01media: imon: invalid dereference in imon_touch_eventSean Young
commit f3f5ba42c58d56d50f539854d8cc188944e96087 upstream. The touch timer is set up in intf1. If the second interface does not exist, the timer and touch input device are not setup and we get the following error, when touch events are reported via intf0. kernel BUG at kernel/time/timer.c:956! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc1+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__mod_timer kernel/time/timer.c:956 [inline] RIP: 0010:__mod_timer kernel/time/timer.c:949 [inline] RIP: 0010:mod_timer+0x5a2/0xb50 kernel/time/timer.c:1100 Code: 45 10 c7 44 24 14 ff ff ff ff 48 89 44 24 08 48 8d 45 20 48 c7 44 24 18 00 00 00 00 48 89 04 24 e9 5a fc ff ff e8 ae ce 0e 00 <0f> 0b e8 a7 ce 0e 00 4c 89 74 24 20 e9 37 fe ff ff e8 98 ce 0e 00 RSP: 0018:ffff8881db209930 EFLAGS: 00010006 RAX: ffffffff86c2b200 RBX: 00000000ffffa688 RCX: ffffffff83efc583 RDX: 0000000000000100 RSI: ffffffff812f4d82 RDI: ffff8881d2356200 RBP: ffff8881d23561e8 R08: ffffffff86c2b200 R09: ffffed103a46abeb R10: ffffed103a46abea R11: ffff8881d2355f53 R12: dffffc0000000000 R13: 1ffff1103b64132d R14: ffff8881d2355f50 R15: 0000000000000006 FS: 0000000000000000(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f75e2799000 CR3: 00000001d3b07000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> imon_touch_event drivers/media/rc/imon.c:1348 [inline] imon_incoming_packet.isra.0+0x2546/0x2f10 drivers/media/rc/imon.c:1603 usb_rx_callback_intf0+0x151/0x1e0 drivers/media/rc/imon.c:1734 __usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1654 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1719 dummy_timer+0x120f/0x2fa2 drivers/usb/gadget/udc/dummy_hcd.c:1965 call_timer_fn+0x179/0x650 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5e3/0x1490 kernel/time/timer.c:1786 __do_softirq+0x221/0x912 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x12f/0x500 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 </IRQ> RIP: 0010:default_idle+0x28/0x2e0 arch/x86/kernel/process.c:581 Code: 90 90 41 56 41 55 65 44 8b 2d 44 3a 8f 7a 41 54 55 53 0f 1f 44 00 00 e8 36 ee d0 fb e9 07 00 00 00 0f 00 2d fa dd 4f 00 fb f4 <65> 44 8b 2d 20 3a 8f 7a 0f 1f 44 00 00 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffffff86c07da8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000007 RBX: ffffffff86c2b200 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffffff86c2ba4c RBP: fffffbfff0d85640 R08: ffffffff86c2b200 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x3b6/0x500 kernel/sched/idle.c:263 cpu_startup_entry+0x14/0x20 kernel/sched/idle.c:355 start_kernel+0x82a/0x864 init/main.c:784 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 Modules linked in: Reported-by: syzbot+f49d12d34f2321cf4df2@syzkaller.appspotmail.com Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-24media: rc: ir-rc6-decoder: enable toggle bit for Kathrein RCU-676 remoteMatthias Reichl
[ Upstream commit 85e4af0a7ae2f146769b7475ae531bf8a3f3afb4 ] The Kathrein RCU-676 remote uses the 32-bit rc6 protocol and toggles bit 15 (0x8000) on repeated button presses, like MCE remotes. Add it's customer code 0x80460000 to the 32-bit rc6 toggle handling code to get proper scancodes and toggle reports. Signed-off-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-05media: rc: imon: Allow iMON RC protocol for ffdc 7e deviceDarius Rad
[ Upstream commit b20a6e298bcb8cb8ae18de26baaf462a6418515b ] Allow selecting the IR protocol, MCE or iMON, for a device that identifies as follows (with config id 0x7e): 15c2:ffdc SoundGraph Inc. iMON PAD Remote Controller As the driver is structured to default to iMON when both RC protocols are supported, existing users of this device (using MCE protocol) will need to manually switch to MCE (RC-6) protocol from userspace (with ir-keytable, sysfs). Signed-off-by: Darius Rad <alpha@area49.net> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-05media: iguanair: add sanity checksOliver Neukum
[ Upstream commit ab1cbdf159beba7395a13ab70bc71180929ca064 ] The driver needs to check the endpoint types, too, as opposed to the number of endpoints. This also requires moving the check earlier. Reported-by: syzbot+01a77b82edaa374068e1@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-05media: mtk-cir: lower de-glitch counter for rc-mm protocolSean Young
[ Upstream commit 5dd4b89dc098bf22cd13e82a308f42a02c102b2b ] The rc-mm protocol can't be decoded by the mtk-cir since the de-glitch filter removes pulses/spaces shorter than 294 microseconds. Tested on a BananaPi R2. Signed-off-by: Sean Young <sean@mess.org> Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-31media: spi: IR LED: add missing of table registrationDaniel Gomez
[ Upstream commit 24e4cf770371df6ad49ed873f21618d9878f64c8 ] MODULE_DEVICE_TABLE(of, <of_match_table> should be called to complete DT OF mathing mechanism and register it. Before this patch: modinfo drivers/media/rc/ir-spi.ko | grep alias After this patch: modinfo drivers/media/rc/ir-spi.ko | grep alias alias: of:N*T*Cir-spi-ledC* alias: of:N*T*Cir-spi-led Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31media: serial_ir: Fix use-after-free in serial_ir_init_moduleYueHaibing
commit 56cd26b618855c9af48c8301aa6754ced8dd0beb upstream. Syzkaller report this: BUG: KASAN: use-after-free in sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468 Read of size 8 at addr ffff8881dc7ae030 by task syz-executor.0/6249 CPU: 1 PID: 6249 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 ? 0xffffffffc1728000 sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468 sysfs_remove_file include/linux/sysfs.h:519 [inline] driver_remove_file+0x40/0x50 drivers/base/driver.c:122 remove_bind_files drivers/base/bus.c:585 [inline] bus_remove_driver+0x186/0x220 drivers/base/bus.c:725 driver_unregister+0x6c/0xa0 drivers/base/driver.c:197 serial_ir_init_module+0x169/0x1000 [serial_ir] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9450132c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007f9450132c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f94501336bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Allocated by task 6249: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:495 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] bus_add_driver+0xc0/0x610 drivers/base/bus.c:651 driver_register+0x1bb/0x3f0 drivers/base/driver.c:170 serial_ir_init_module+0xe8/0x1000 [serial_ir] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 6249: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:457 slab_free_hook mm/slub.c:1430 [inline] slab_free_freelist_hook mm/slub.c:1457 [inline] slab_free mm/slub.c:3005 [inline] kfree+0xe1/0x270 mm/slub.c:3957 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 bus_remove_driver+0x10e/0x220 drivers/base/bus.c:732 driver_unregister+0x6c/0xa0 drivers/base/driver.c:197 serial_ir_init_module+0x14c/0x1000 [serial_ir] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881dc7ae000 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 48 bytes inside of 256-byte region [ffff8881dc7ae000, ffff8881dc7ae100) The buggy address belongs to the page: page:ffffea000771eb80 count:1 mapcount:0 mapping:ffff8881f6c02e00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 ffffea0007d14800 0000000400000002 ffff8881f6c02e00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881dc7adf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881dc7adf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8881dc7ae000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881dc7ae080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881dc7ae100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00 There are already cleanup handlings in serial_ir_init error path, no need to call serial_ir_exit do it again in serial_ir_init_module, otherwise will trigger a use-after-free issue. Fixes: fa5dc29c1fcc ("[media] lirc_serial: move out of staging and rename to serial_ir") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22media: rc: oops in ir_timer_keyup after device unplugSean Young
commit 8d4068810d9926250dd2435719a080b889eb44c3 upstream. If there is IR in the raw kfifo when ir_raw_event_unregister() is called, then kthread_stop() causes ir_raw_event_thread to be scheduled, decode some scancodes and re-arm timer_keyup. The timer_keyup then fires when the rc device is long gone. Cc: stable@vger.kernel.org Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-17media: rc: mce_kbd decoder: fix stuck keysSean Young
commit 63039c29f7a4ce8a8bd165173840543c0098d7b0 upstream. The MCE Remote sends a 0 scancode when keys are released. If this is not received or decoded, then keys can get "stuck"; the keyup event is not sent since the input_sync() is missing from the timeout handler. Cc: stable@vger.kernel.org Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14media: rc: partial revert of "media: rc: per-protocol repeat period"Sean Young
commit 67f0f15ad5c47490e19f2526f8f9cea97c5ce1a6 upstream. Since commit d57ea877af38 ("media: rc: per-protocol repeat period"), most IR protocols have a lower keyup timeout. This causes problems on the ite-cir, which has default IR timeout of 200ms. Since the IR decoders read the trailing space, with a IR timeout of 200ms, the last keydown will have at least a delay of 200ms. This is more than the protocol timeout of e.g. rc-6 (which is 164ms). As a result the last IR will be interpreted as a new keydown event, and we get two keypresses. Revert the protocol timeout to 250ms, except for cec which needs a timeout of 550ms. Fixes: d57ea877af38 ("media: rc: per-protocol repeat period") Reported-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Tested-by: Matthias Reichl <hias@horus.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14media: rc: sir_ir: detect presence of portSean Young
commit 30b4e122d71cbec2944a5f8b558b88936ee42f10 upstream. Without this test, sir_ir clumsy claims resources for a device which does not exist. The 0-day kernel test robot reports the following errors (in a loop): sir_ir sir_ir.0: Trapped in interrupt genirq: Flags mismatch irq 4. 00000000 (ttyS0) vs. 00000000 (sir_ir) When sir_ir is loaded with the default io and irq, the following happens: - sir_ir claims irq 4 - user space opens /dev/ttyS0 - in serial8250_do_startup(), some setup is done for ttyS0, which causes irq 4 to fire (in THRE test) - sir_ir does not realise it was not for it, and spins until the "trapped in interrupt" - now serial driver calls setup_irq() and fails and we get the "Flags mismatch" error. There is no port present at 0x3e8 so simply check for the presence of a port, as suggested by Linus. Reported-by: kbuild test robot <fengguang.wu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30media: rc: nec decoder should not send both repeat and keycodeSean Young
commit 829bbf268894d0866bb9dd2b1e430cfa5c5f0779 upstream. When receiving an nec repeat, rc_repeat() is called and then rc_keydown() with the last decoded scancode. That last call is redundant. Fixes: 265a2988d202 ("media: rc-core: consistent use of rc_repeat()") Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30media: rc: check for integer overflowSean Young
commit 3e45067f94bbd61dec0619b1c32744eb0de480c8 upstream. The ioctl LIRC_SET_REC_TIMEOUT would set a timeout of 704ns if called with a timeout of 4294968us. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21media: imon: Fix null-ptr-deref in imon_probeArvind Yadav
commit 58fd55e838276a0c13d1dc7c387f90f25063cbf3 upstream. It seems that the return value of usb_ifnum_to_if() can be NULL and needs to be checked. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-04Update James Hogan's email addressJames Hogan
Update my imgtec.com and personal email address to my kernel.org one in a few places as MIPS will soon no longer be part of Imagination Technologies, and add mappings in .mailcap so get_maintainer.pl reports the right address. Signed-off-by: James Hogan <jhogan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-05media: Revert "[media] lirc_dev: remove superfluous get/put_device() calls"Sean Young
This reverts commit 5be2b76a9ca4ea5fd3e221114d62eeb0d78267ca. Only when the lirc device is freed, should we drop our reference to rc_dev, else we the rc_dev is freed to early. If userspace has a file descriptor open during unplug, it goes bang. ================================================================== BUG: KASAN: use-after-free in __lock_acquire+0x7bb/0x1e10 Read of size 8 at addr ffff8801d7d61ed0 by task ir-rec/2609 -snip- mutex_lock_nested+0x1b/0x20 ? mutex_lock_nested+0x1b/0x20 rc_close.part.6+0x20/0x60 [rc_core] rc_close+0x13/0x20 [rc_core] lirc_dev_fop_close+0x62/0xd0 [lirc_dev] __fput+0x236/0x410 ? fput+0xb0/0xb0 ? do_raw_spin_trylock+0x110/0x110 ? set_rq_offline.part.70+0xa0/0xa0 ____fput+0xe/0x10 task_work_run+0x116/0x180 ? task_work_cancel+0x170/0x170 ? _raw_spin_unlock+0x27/0x40 ? switch_task_namespaces+0x5f/0x90 do_exit+0x68b/0xe80 Cc: stable@vger.kernel.org # For Kernel 4.13 Fixes: 5be2b76a9ca4 ("[media] lirc_dev: remove superfluous get/put_device() calls") Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-31media: serial_ir: fix tx timing calculation on 32-bitSean Young
Move the calculation to where it is needed, so the result doesn't need to be stored in the device struct. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-31media: rc: gpio-ir-tx: use ktime accessor functionsSean Young
Prefer using accessor functions so we are not dependent on the ktime_t type. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-31media: rc: use ktime accessor functionsJasmin Jessich
Prefer using accessor functions so we are not dependent on the ktime_t type. Signed-off-by: Jasmin Jessich <jasmin@anw.at> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: rename RC_TYPE_* to RC_PROTO_* and RC_BIT_* to RC_PROTO_BIT_*Sean Young
RC_TYPE is confusing and it's just the protocol. So rename it. Suggested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sean Young <sean@mess.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: per-protocol repeat periodSean Young
CEC needs a keypress timeout of 550ms, which is too high for the IR protocols. Also fill in known repeat times, with 50ms error margin. Also, combine all protocol data into one structure. Signed-off-by: Sean Young <sean@mess.org> Suggested-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: ensure we do not read out of boundsSean Young
If rc_validate_filter() is called for CEC or XMP, then we would read beyond the end of the array. Suggested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: simplify ir_raw_event_store_edge()Sean Young
Since commit 12749b198fa4 ("[media] rc: saa7134: add trailing space for timely decoding"), the workaround of inserting reset events is no longer needed. Note that the initial reset is not needed either; other rc-core drivers that don't use ir_raw_event_store_edge() never call this at all. Verified on a HVR-1150 and Raspberry Pi. Fixes: 3f5c4c73322e ("[media] rc: fix ghost keypresses with certain hw") Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: saa7134: add trailing space for timely decodingSean Young
The gpio-ir-recv driver adds timeouts which the saa7134 lacks; this causes keypress not to arrive, and to only arrive once more IR is received. This is what the commit below calls "ghost keypresses", and that commit does not solve the issue completely. This makes the IR on the HVR-1150 much more reliable and responsive. Fixes: 3f5c4c73322e ("[media] rc: fix ghost keypresses with certain hw") Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc-core: improve ir_raw_store_edge() handlingSean Young
The gpio-ir-recv driver does many wakeups (once per edge); the saa7134 driver has special handling to only wakeup 15ms after the first edge. Make this part of rc-core so gpio-ir-recv also benefits from this (so a rc-5 keypress now causes 3 wakeups rather than 24). Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: winbond-cir: buffer overrun during transmitSean Young
We're reading beyond the buffer before checking its length. BUG: KASAN: slab-out-of-bounds in wbcir_irq_tx Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: mceusb: do not read data parameters unless requiredSean Young
This causes out-of-bounds read on device probe. BUG: KASAN: slab-out-of-bounds in mceusb_dev_printdata+0xdc/0x830 [mceusb] Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: add zx-irdec remote control driverShawn Guo
It adds the remote control driver and corresponding keymap file for IRDEC block found on ZTE ZX family SoCs. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: ir-nec-decoder: move scancode composing code into a shared functionShawn Guo
The NEC scancode composing and protocol type detection in ir_nec_decode() is generic enough to be a shared function. Let's create an inline function in rc-core.h, so that other remote control drivers can reuse this function to save some code. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: sunxi-cir: explicitly request exclusive reset controlPhilipp Zabel
Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: st-rc: explicitly request exclusive reset controlPhilipp Zabel
Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: nuvoton: remove rudimentary transmit functionalityHeiner Kallweit
Transmit support in this driver was never tested and based on the code it can't work. Just one example: The buffer provided to nvt_tx_ir holds unsigned int values in micro seconds: First value is for a pulse, second for a pause, etc. Bytes in this buffer are copied as-is to the chip FIFO what can't work as the chip-internal format is totally different. See also conversion done in nvt_process_rx_ir_data. Even if we would try to fix this we have the issue that we can't test it. There seems to be no device on the market using IR transmit with one of the chips supported by this driver. To facilitate maintenance of the driver I'd propose to remove the rudimentary transmit support. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: pwm-ir-tx: add new driverSean Young
This is new driver which uses pwm, so it is more power-efficient than the bit banging gpio-ir-tx driver. Signed-off-by: Sean Young <sean@mess.org> Reviewed-by: Pavel Machek <pavel@ucw.cz> Tested-by: Matthias Reichl <hias@horus.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: gpio-ir-tx: add new driverSean Young
This is a simple bit-banging GPIO IR TX driver. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Matthias Reichl <hias@horus.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: mce kbd decoder not needed for IR TX driversSean Young
Without this patch, an input device is created which is not necessary. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc-core: rename input_name to device_nameSean Young
When an ir-spi is registered, you get this message. rc rc0: Unspecified device as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0 "Unspecified device" refers to input_name, which makes no sense for IR TX only devices. So, rename to device_name. Also make driver_name const char* so that no casts are needed anywhere. Now ir-spi reports: rc rc0: IR SPI as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0 Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: constify attribute_group structuresArvind Yadav
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 11605 880 20 12505 30d9 drivers/media/rc/rc-main.o File size After adding 'const': text data bss dec hex filename 11797 720 20 12537 30f9 drivers/media/rc/rc-main.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: imon: constify attribute_group structuresArvind Yadav
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 18551 2256 77 20884 5194 drivers/media/rc/imon.o File size After adding 'const': text data bss dec hex filename 18679 2160 77 20916 51b4 drivers/media/rc/imon.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: sir_ir: remove unnecessary static in sir_interrupt()Gustavo A. R. Silva
Remove unnecessary static on local variable delt. Such variable is initialized before being used, on every execution path throughout the function. The static has no benefit and, removing it reduces the code size. This issue was detected using Coccinelle and the following semantic patch: @bad exists@ position p; identifier x; type T; @@ static T x@p; ... x = <+...x...+> @@ identifier x; expression e; type T; position p != bad.p; @@ -static T x@p; ... when != x when strict ?x = e; In the following log you can see the difference in the code size. Also, there is a significant difference in the bss segment. This log is the output of the size command, before and after the code change: before: text data bss dec hex filename 5009 3456 576 9041 2351 drivers/media/rc/sir_ir.o after: text data bss dec hex filename 4988 3400 512 8900 22c4 drivers/media/rc/sir_ir.o Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc-core: do not depend on MEDIA_SUPPORTSean Young
There is no dependency between the two, so remove the dependency in Kconfig files. Signed-off-by: Sean Young <sean@mess.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: mtk-cir: add support for MediaTek MT7622 SoCSean Wang
This patch adds driver for CIR controller on MT7622 SoC. It has similar handling logic as the previously MT7623 does, but there are some differences in the register and field definition. So for ease portability and maintenance, those differences all are being kept inside the platform data as other drivers usually do. Currently testing successfully on NEC and SONY remote controller. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: mtk-cir: add platform data to adapt into various hardwareSean Wang
This patch is the preparation patch in order to adapt into various hardware through adding platform data which holds specific characteristics and differences among MediaTek supported CIR devices instead of the old way defining those data in the static way as macro has. And the existing logic would be slightly changed to operate on those data which the actual device depends on. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc-core: consistent use of rc_repeat()David Härdeman
The NEC decoder and the Sanyo decoders check if dev->keypressed is true before calling rc_repeat (without holding dev->keylock). Meanwhile, the XMP and JVC decoders do no such checks. This patch makes sure all users of rc_repeat() do so consistently by removing extra checks in NEC/Sanyo and modifying the check a bit in rc_repeat() so that no input event is generated if the key isn't pressed. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: lirc: LIRC_GET_REC_RESOLUTION should return microsecondsSean Young
Since commit e8f4818895b3 ("[media] lirc: advertise LIRC_CAN_GET_REC_RESOLUTION and improve") lircd uses the ioctl LIRC_GET_REC_RESOLUTION to determine the shortest pulse or space that the hardware can detect. This breaks decoding in lirc because lircd expects the answer in microseconds, but nanoseconds is returned. Cc: <stable@vger.kernel.org> # v2.6.36+ Reported-by: Derek <user.vdr@gmail.com> Tested-by: Derek <user.vdr@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-13[media] rc-core: cleanup rc_register_device pt2David Härdeman
Now that rc_register_device() is reorganised, the dev->initialized hack can be removed. Any driver which calls rc_register_device() must be prepared for the device to go live immediately. The dev->initialized commits that are relevant are commit c73bbaa4ec3e ("[media] rc-core: don't lock device at rc_register_device()") and commit 08aeb7c9a42a ("[media] rc: add locking to fix register/show race"). The original problem was that show_protocols() would access dev->rc_map.* and various other bits which are now properly initialized before device_add() is called. At the same time, remove the bogus "device is being removed" check. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-13[media] rc-core: cleanup rc_register_deviceDavid Härdeman
The device core infrastructure is based on the presumption that once a driver calls device_add(), it must be ready to accept userspace interaction. This requires splitting rc_setup_rx_device() into two functions and reorganizing rc_register_device() so that as much work as possible is performed before calling device_add(). Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-13[media] sir_ir: annotate hardware config module parametersSean Young
This module was merged after commit 5a8fc6a3cebb ("Annotate hardware config module parameters in drivers/media/"), so add add the missing hardware annotations. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-07[media] ir-spi: Fix issues with lirc APIAnton Blanchard
The ir-spi driver has 2 issues which prevents it from working with lirc: 1. The ir-spi driver uses 16 bits of SPI data to create one cycle of the waveform. As such our SPI clock needs to be 16x faster than the carrier frequency. The driver is inconsistent in how it currently handles this. It initializes it to the carrier frequency: But the commit message has some example code which initialises it to 16x the carrier frequency: val = 608000; ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val); To maintain compatibility with lirc, always do the frequency adjustment in the driver. 2. lirc presents pulses in microseconds, but the ir-spi driver treats them as cycles of the carrier. Similar to other lirc drivers, do the conversion with DIV_ROUND_CLOSEST(). Fixes: fe052da49201 ("[media] rc: add support for IR LEDs driven through SPI") Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-19 02:36:54 +0000