aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)Author
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-23Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "There's a number of fixes: - a round of fixes for CPUID-less legacy CPUs - a number of microcode loader fixes - i8042 detection robustization fixes - stack dump/unwinder fixes - x86 SoC platform driver fixes - a GCC 7 warning fix - virtualization related fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) Revert "x86/unwind: Detect bad stack return address" x86/paravirt: Mark unused patch_default label x86/microcode/AMD: Reload proper initrd start address x86/platform/intel/quark: Add printf attribute to imr_self_test_result() x86/platform/intel-mid: Switch MPU3050 driver to IIO x86/alternatives: Do not use sync_core() to serialize I$ x86/topology: Document cpu_llc_id x86/hyperv: Handle unknown NMIs on one CPU when unknown_nmi_panic x86/asm: Rewrite sync_core() to use IRET-to-self x86/microcode/intel: Replace sync_core() with native_cpuid() Revert "x86/boot: Fail the boot if !M486 and CPUID is missing" x86/asm/32: Make sync_core() handle missing CPUID on all 32-bit kernels x86/cpu: Probe CPUID leaf 6 even when cpuid_level == 6 x86/tools: Fix gcc-7 warning in relocs.c x86/unwind: Dump stack data on warnings x86/unwind: Adjust last frame check for aligned function stacks x86/init: Fix a couple of comment typos x86/init: Remove i8042_detect() from platform ops Input: i8042 - Trust firmware a bit more when probing on X86 x86/init: Add i8042 state to the platform data ...
2016-12-19Merge tag 'mfd-for-linus-4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support - Add support for Ricoh RC5T619 PMIC to rn5t618 - Add support for PM8821 PMIC to qcom-pm8xxx New Functionality: - Add support for GPIO to lpc_ich - Add support for GPADC to sun4i - Add ability for rk808 to shutdown Fix-ups: - Simplify/strip unnecessary code; tps65218, palmas, tps65217 - Device Tree binding updates; tps65218, altera-a10sr - Provide/export device ID info; tps65218, axp20x-i2c, hi655x-pmic, fsl-imx25-tsadc, intel_soc_pmic_bxtwc - Use MFD API instead of of_platform_populate(); tps65218 - Generalise name-space; pm8xxx - Supply/edit regmap configuration; axp20x, cs47l24-tables, axp20x - Enable compile testing; max77620, max77686, exynos-lpass, abx500-core - Coding style issues; wm8994-core, wm5102-tables - Supply endian support; syscon - Remove module support; ab3100-core, ab8500-debugfs, ab8500-gpadc, abx500-core Bug Fixes: - Fix ordering issues; wm8994 - Fix dependencies (build-time/run-time); exynos_lpass, sun4i-gpadc - Fix compiler warnings; sun4i-gpadc - Fix leaks; mfd-core - Fix page fault during module unload; tps65217" * tag 'mfd-for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits) mfd: tps65217: Support an interrupt pin as the system wakeup mfd: tps65217: Make an interrupt handler simpler mfd: tps65217: Update register interrupt mask bits instead of writing operation mfd: tps65217: Specify the IRQ name mfd: tps65217: Fix page fault on unloading modules mfd: palmas: Remove redundant check in palmas_power_off mfd: arizona: Disable IRQs during driver remove mfd: pm8xxx: add support to pm8821 mfd: intel-lpss: Try to enable Memory-Write-Invalidate mfd: rn5t618: Add Ricoh RC5T619 PMIC support mfd: axp20x: Add address extension registers for AXP806 regmap mfd: intel_soc_pmic_bxtwc: Fix a typo in MODULE_DEVICE_TABLE() mfd: core: Fix device reference leak in mfd_clone_cell mfd: bcm590xx: Simplify a test mfd: sun4i-gpadc: Select regmap-irq mfd: abx500-core: drop unused MODULE_ tags from non-modular code mfd: ab8500: make sysctrl explicitly non-modular mfd: ab8500-gpadc: Make it explicitly non-modular mfd: ab8500-debugfs: Make it explicitly non-modular mfd: ab8500-core: Make it explicitly non-modular ...
2016-12-19Input: i8042 - Trust firmware a bit more when probing on X86Dmitry Torokhov
The error message "Can't read CTR while initializing i8042" appears on Cherry Trail-based devices at each boot time: i8042: PNP: No PS/2 controller found. Probing ports directly. i8042: Can't read CTR while initializing i8042 i8042: probe of i8042 failed with error -5 This happens because we historically do not trust firmware on X86 and, while noting that PNP does not show keyboard or mouse devices, we still charge ahead and try to probe the controller. Let's relax this a bit and if results of PNP probe agree with the results of platform initialization/quirks conclude that there is, in fact, no i8042. While at it, let's avoid using x86_platform.i8042_detect() and instead abort execution early if platform indicates that it can not possibly have i8042 (x86_platform.legacy.i8042 equals X86_LEGACY_I8042_PLATFORM_ABSENT). Reported-and-tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Cc: linux-input@vger.kernel.org Link: http://lkml.kernel.org/r/1481317061-31486-3-git-send-email-dmitry.torokhov@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: - updated support for Synaptics RMI4 devices, including support for SMBus controllers, firmware update support, sensor tuning, and PS/2 guest support - ALPS driver now supports tracksticks on SS5 controllers - i8042 now uses chassis info to skip selftest on Asus laptops as list of individual models became too unwieldy - miscellaneous fixes to other drivers * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (67 commits) Input: imx6ul_tsc - generalize the averaging property Input: drv260x - use generic device properties Input: drv260x - use temporary for &client->dev Input: drv260x - fix input device's parent assignment Input: synaptics-rmi4 - add support for F34 V7 bootloader Input: drv260x - fix initializing overdrive voltage Input: ALPS - fix protcol -> protocol Input: i8042 - comment #else/#endif of CONFIG_PNP Input: lpc32xx-keys - fix invalid error handling of a requested irq Input: synaptics-rmi4 - fix debug for sensor clip Input: synaptics-rmi4 - store the attn data in the driver Input: synaptics-rmi4 - allow to add attention data Input: synaptics-rmi4 - f03 - grab data passed by transport device Input: synaptics-rmi4 - add support for F03 Input: imx6ul_tsc - convert int to u32 Input: imx6ul_tsc - add mask when set REG_ADC_CFG Input: synaptics-rmi4 - have only one struct platform data Input: synaptics-rmi4 - remove EXPORT_SYMBOL_GPL for internal functions Input: synaptics-rmi4 - remove mutex calls while updating the firmware Input: drv2667 - fix misuse of regmap_update_bits ...
2016-12-16Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 4.10 merge window.
2016-12-15Merge branch 'synaptics-rmi4' into nextDmitry Torokhov
Merge updated Synaptics RMI4 support, including support for SMBus controllers and flashing firmware.
2016-12-15Input: imx6ul_tsc - generalize the averaging propertyGuy Shapiro
Make the avarage-samples property a general touchscreen property rather than imx6ul device specific. Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-14Merge tag 'for-v4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - new driver for Intel PIIX4 - lots of module autoload fixes - misc fixes * tag 'for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power_supply: wm97xx_battery: use power_supply_get_drvdata wm8350_power: use permission-specific DEVICE_ATTR variants power: ipaq_micro_battery: fix alias power: supply: bq27xxx_battery: Fix register map for BQ27510 and BQ27520 bq24190_charger: Fix PM runtime use for bq24190_battery_set_property power: supply: lp8788: remove an unneeded NULL check power: reset: zx-reboot: Fix module autoload power: reset: syscon-reboot-mode: Fix module autoload power: reset: at91-poweroff: Fix module autoload power: reset: at91-reset: Fix module autoload power: supply: axp288_fuel_gauge: Fix module autoload power: supply: max8997_charger: Fix module autoload power: supply: max17040: Change register transaction length from 8 bits to 16 bits power: supply: bq27xxx_battery: don't update poll_interval param if same power: supply: improve function-level documentation power: reset: Add Intel PIIX4 poweroff driver
2016-12-14Merge tag 'sound-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "No dramatic changes are found in this development cycle, but as usual, many commits are applied in a wide range of drivers. Most of big changes are in ASoC, where a few bits of framework work and quite a lot of cleanups and improvements to existing code have been done. The rest are usual stuff, a few HD-audio and USB-audio quirks and fixes, as well as the drop of kthread usages in the whole subsystem. Below are some highlights: ASoC: - support for stereo DAPM controls - some initial work on the of-graph sound card - regmap conversions of the remaining AC'97 drivers - a new version of the topology ABI; this should be backward compatible - updates / cleanups of rsnd, sunxi, sti, nau8825, samsung, arizona, Intel skylake, atom-sst - new drivers for Cirrus Logic CS42L42, Qualcomm MSM8916-WCD, and Realtek RT5665 USB-audio: - yet another race fix at disconnection - tolerated packet size calculation for some Android devices - quirks for Axe-Fx II, QuickCam, TEAC 501/503 HD-audio: - improvement of Dell pin fixup mapping - quirks for HP Z1 Gen3, Alienware 15 R2 2016 and ALC622 headset mic Misc: - replace all kthread usages with simple works" * tag 'sound-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (296 commits) ALSA: hiface: Fix M2Tech hiFace driver sampling rate change ALSA: usb-audio: Eliminate noise at the start of DSD playback. ALSA: usb-audio: Add native DSD support for TEAC 501/503 DAC ASoC: wm_adsp: wm_adsp_buf_alloc should use kfree in error path ASoC: topology: avoid uninitialized kcontrol_type ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks ALSA: usb-audio: add implicit fb quirk for Axe-Fx II ASoC: zte: spdif: correct ZX_SPDIF_CLK_RAT define ASoC: zte: spdif and i2s drivers are not zx296702 specific ASoC: rsnd: setup BRGCKR/BRRA/BRRB when starting ASoC: rsnd: enable/disable ADG when suspend/resume timing ASoC: rsnd: tidyup ssi->usrcnt counter check in hw_params ALSA: cs46xx: add a new line ASoC: Intel: update bxt_da7219_max98357a to support quad ch dmic capture ASoC: nau8825: disable sinc filter for high THD of ADC ALSA: usb-audio: more tolerant packetsize ALSA: usb-audio: avoid setting of sample rate multiple times on bus ASoC: cs35l34: Simplify the logic to set CS35L34_MCLK_CTL setting ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiO ALSA: hda: when comparing pin configurations, ignore assoc in addition to seq ...
2016-12-13Merge tag 'for-linus-4.10-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "Xen features and fixes for 4.10 These are some fixes, a move of some arm related headers to share them between arm and arm64 and a series introducing a helper to make code more readable. The most notable change is David stepping down as maintainer of the Xen hypervisor interface. This results in me sending you the pull requests for Xen related code from now on" * tag 'for-linus-4.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits) xen/balloon: Only mark a page as managed when it is released xenbus: fix deadlock on writes to /proc/xen/xenbus xen/scsifront: don't request a slot on the ring until request is ready xen/x86: Increase xen_e820_map to E820_X_MAX possible entries x86: Make E820_X_MAX unconditionally larger than E820MAX xen/pci: Bubble up error and fix description. xen: xenbus: set error code on failure xen: set error code on failures arm/xen: Use alloc_percpu rather than __alloc_percpu arm/arm64: xen: Move shared architecture headers to include/xen/arm xen/events: use xen_vcpu_id mapping for EVTCHNOP_status xen/gntdev: Use VM_MIXEDMAP instead of VM_IO to avoid NUMA balancing xen-scsifront: Add a missing call to kfree MAINTAINERS: update XEN HYPERVISOR INTERFACE xenfs: Use proc_create_mount_point() to create /proc/xen xen-platform: use builtin_pci_driver xen-netback: fix error handling output xen: make use of xenbus_read_unsigned() in xenbus xen: make use of xenbus_read_unsigned() in xen-pciback xen: make use of xenbus_read_unsigned() in xen-fbfront ...
2016-12-12Input: drv260x - use generic device propertiesJingkui Wang
Update driver drv260x to use generic device properties so that it can be used on non-DT systems. We also remove platform data as generic device properties work on static board code as well. Signed-off-by: Jingkui Wang <jkwang@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-12Input: drv260x - use temporary for &client->devDmitry Torokhov
Let's introduce a temporary for "client->dev" is probe() as we use it quite a few times and "dev" is shorter. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-12Input: drv260x - fix input device's parent assignmentJingkui Wang
We were assigning I2C bus controller instead of client as parent device. Besides being logically wrong, it messed up with devm handling of input device. As a result we were leaving input device and event node behind after rmmod-ing the driver, which lead to a kernel oops if one were to access the event node later. Let's remove the assignment and rely on devm_input_allocate_device() to set it up properly for us. Signed-off-by: Jingkui Wang <jkwang@google.com> Fixes: 7132fe4f5687 ("Input: drv260x - add TI drv260x haptics driver") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-12Input: synaptics-rmi4 - add support for F34 V7 bootloaderNick Dyer
Port firmware update code from Samsung Galaxy S7 driver into mainline framework. This patch has been tested on Synaptics S7813. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-12Input: drv260x - fix initializing overdrive voltageDmitry Torokhov
We were accidentally initializing haptics->rated_voltage twice, and did not initialize overdrive voltage. Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-12Input: ALPS - fix protcol -> protocolMarcos Paulo de Souza
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-12Input: i8042 - comment #else/#endif of CONFIG_PNPMarcos Paulo de Souza
As this define check if huge, this makes easier to read the code. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-12Merge remote-tracking branches 'asoc/topic/inntel', 'asoc/topic/input', ↵Mark Brown
'asoc/topic/max98504' and 'asoc/topic/nau8825' into asoc-next
2016-12-07Input: lpc32xx-keys - fix invalid error handling of a requested irqVladimir Zapolskiy
Semantics of NR_IRQS is different on machines with SPARSE_IRQ option disabled or enabled, in the latter case IRQs are allocated starting at least from the value specified by NR_IRQS and going upwards, so the check of (irq >= NR_IRQ) to decide about an error code returned by platform_get_irq() is completely invalid, don't attempt to overrule irq subsystem in the driver. The change fixes lpc32xx_keys driver initialization on boot: lpc32xx_keys 40050000.key: failed to get platform irq lpc32xx_keys: probe of 40050000.key failed with error -22 Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-07Input: synaptics-rmi4 - fix debug for sensor clipNick Dyer
The debug would only ever output zero for the clip information. Signed-off-by: Nick Dyer <nick@shmanahar.org> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-02Input: synaptics-rmi4 - store the attn data in the driverBenjamin Tissoires
Now that we have a proper API to set the attention data, there is no point in keeping it in the transport driver. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-02Input: synaptics-rmi4 - allow to add attention dataBenjamin Tissoires
The HID implementation of RMI4 provides the data during the interrupt (in the input report). We need to provide a way for this transport driver to provide the attention data while calling an IRQ. We use a fifo in rmi_core to not lose any incoming event. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-02Input: synaptics-rmi4 - f03 - grab data passed by transport deviceDennis Wassenberg
First check if there are data available passed by the transport device. If data available use these data. If there are no data available try to read the rmi block if dsata are passed this way. This is the way the other rmi function handlers will do this. This patch is needed on HID devices because the firmware reads F03 data registers and adds them to the HID attention report. Reading those registers from the driver after the firmware read them will result in invalid data. Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-02Input: synaptics-rmi4 - add support for F03Lyude Paul
This adds basic functionality for PS/2 passthrough on Synaptics Touchpads using RMI4 through smbus. Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Lyude Paul <thatslyude@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-01Input: arizona-haptics - Use SoC component pin control functionsRichard Fitzgerald
The name of a codec pin can have an optional prefix string, which is defined by the SoC machine driver. The snd_soc_dapm_x_pin functions take the fully-specified name including the prefix and so the existing code would fail to find the pin if the audio machine driver had added a prefix. Switch to using the snd_soc_component_x_pin equivalent functions that take a specified SoC component and automatically add the name prefix to the provided pin name. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "We are disabling automatic probing of BYD touchpads as it results in too many false positives, and the hardware is not terribly popular and having the protocol support does not result in significantly improved user experience. We also change keycode for KEY_DATA to avoid clashing with KEY_FASTREVERSE. Luckily this newish code is used by CEC framework that is still in staging, so it is extremely unlikely that someone has already started using this keycode" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: change KEY_DATA from 0x275 to 0x277 Input: psmouse - disable automatic probing of BYD touchpads
2016-11-30Input: imx6ul_tsc - convert int to u32Guy Shapiro
The code uses of_property_read_u32 and expects positive values. However, the values are stored in signed int variables. Additionally, the registers values are also stored in signed variables without a good reason (readl/writel expect u32). The only time this caused a real bug was in the new average-samples property, in which the property is numerically compared and implicitly expected to be positive. I believe it's better to change all the properties and registers to u32, for consistency and warnings reduction. Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Reported-by: Bjørn Forsman <bjorn.forsman@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: imx6ul_tsc - add mask when set REG_ADC_CFGHaibo Chen
Add mask of each function bits of REG_ADC_CFG, and clear these function bits first, otherwise use '|=' operation may get the wrong setting which depends on the original value of REG_ADC_CFG. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: synaptics-rmi4 - have only one struct platform dataBenjamin Tissoires
If struct rmi_device_platform_data contains pointers to other struct, it gets difficult to allocate a fixed size struct and copy it over between drivers. Change the pointers into a struct and change the code in rmi4 accordingly. Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: synaptics-rmi4 - remove EXPORT_SYMBOL_GPL for internal functionsBenjamin Tissoires
those functions should not be used outside of rmi_core.ko. There is no point in exporting them to the world. It looks like rmi_read_pdt_entry() should be static too. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: synaptics-rmi4 - remove mutex calls while updating the firmwareBenjamin Tissoires
This partially reverts commit 29fd0ec2bdbe ("Input: synaptics-rmi4 - add support for F34 device reflash") irq_mutex should be used only to protect data->current_irq_mask, not preventing incoming input to be processed while the upgrade of the firmware is happening. We can simply disable the irqs when we don't want them to interfere with the upgrade process. Tested on S7300 and S7800 (with F34 v7 patch added) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: drv2667 - fix misuse of regmap_update_bitsFlorian Vaussard
Using regmap_update_bits(..., mask, 1) with 'mask' following (1 << k) and k greater than 0 is wrong. Indeed, _regmap_update_bits will perform (mask & 1), which results in 0 if LSB of mask is 0. Thus the call regmap_update_bits(..., mask, 1) is in reality equivalent to regmap_update_bits(..., mask, 0). In such a case, the correct use is regmap_update_bits(..., mask, mask). This driver is performing such a mistake with the DRV2667_STANDBY mask, which equals (1 << 6). Fix the driver to make it consistent with the API, and fix the alignment problem at the same time. Please note that this change is untested, as I do not have this piece of hardware. Testers are welcome! Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: drv2665 - fix misuse of regmap_update_bitsFlorian Vaussard
Using regmap_update_bits(..., mask, 1) with 'mask' following (1 << k) and k greater than 0 is wrong. Indeed, _regmap_update_bits will perform (mask & 1), which results in 0 if LSB of mask is 0. Thus the call regmap_update_bits(..., mask, 1) is in reality equivalent to regmap_update_bits(..., mask, 0). In such a case, the correct use is regmap_update_bits(..., mask, mask). This driver is performing such a mistake with the DRV2665_STANDBY mask, which equals BIT(6). Fix the driver to make it consistent with the API, and fix the alignment problem at the same time. Please note that this change is untested, as I do not have this piece of hardware. Testers are welcome! Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: synaptics-rmi4 - add rmi_enable/disable_irqBenjamin Tissoires
Set the .enabled boolean and trigger an event processing when enabling for edge-triggered systems. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-28Input: ALPS - clean up code for SS5 hardwarePaul Donohue
The return value of alps_get_pkt_id_ss4_v2() should really be "enum SS4_PACKET_ID", not "unsigned char". Correct this. Also, most of the Alps SS5 (SS4 v2) packet byte parsing code is implemented using macros, but there are a few places where bytes are directly manipulated in alps.c. For consistency, migrate the rest of these to macros. Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Paul Donohue <linux-kernel@PaulSD.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-28Input: ALPS - clean up TrackStick handling for SS5 hardwarePaul Donohue
For consistency and clarity, the input_report_*() functions should be called by alps_process_packet_ss4_v2() instead of by alps_decode_ss4_v2(). Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Paul Donohue <linux-kernel@PaulSD.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-28Input: ALPS - fix TrackStick support for SS5 hardwarePaul Donohue
The current Alps SS5 (SS4 v2) code generates bogus TouchPad events when TrackStick packets are processed. This causes the xorg synaptics driver to print "unable to find touch point 0" and "BUG: triggered 'if (priv->num_active_touches > priv->num_slots)'" messages. It also causes unexpected TouchPad button release and re-click event sequences if the TrackStick is moved while holding a TouchPad button. This commit corrects the problem by adjusting alps_process_packet_ss4_v2() so that it only sends TrackStick reports when processing TrackStick packets. Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Paul Donohue <linux-kernel@PaulSD.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-27Input: imx6ul_tsc - add support for sample averagingGuy Shapiro
The i.MX6UL internal touchscreen controller contains an option to average upon samples. This feature reduces noise from the produced touch locations. This patch adds sample averaging support to the imx6ul_tsc device driver. Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-27Input: xpad - fix Xbox One rumble stopping after 2.5 secsCameron Gutman
Unlike previous Xbox pads, the Xbox One pad doesn't have "sticky" rumble packets. The duration is encoded into the command and expiration is handled by the pad firmware. ff-memless needs pseudo-sticky behavior for rumble effects to behave properly for long duration effects. We already specify the maximum rumble on duration in the command packets, but it's still only good for about 2.5 seconds of rumble. This is easily reproducible running fftest's sine vibration test. It turns out there's a repeat count encoded in the rumble command. We can abuse that to get the pseudo-sticky behavior needed for rumble to behave as expected for effects with long duration. By my math, this change should allow a single ff_effect to rumble for 10 minutes straight, which should be more than enough for most needs. Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-27Input: xpad - add product ID for Xbox One S padCameron Gutman
This is the new gamepad that ships with the Xbox One S which includes Bluetooth functionality. Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-25Input: soc_button_array - bail out earlier if gpiod_count is zeroBenjamin Tissoires
The PNP0C40 device of the Surface 3 doesn't have any GPIO attached to it. Instead of trying to access the GPIO, request the count beforehand and bail out if it is null or if an error is returned. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-25Input: soc_button_array - use gpio_is_valid()Benjamin Tissoires
gpio_keys will later use gpio_is_valid(). To match the actual behavior, we should use it here too. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-23power_supply: wm97xx_battery: use power_supply_get_drvdataRobert Jarzmik
As the power supply framework provides a way to store and retrieve private supply data, use it. In the process, change the platform data for wm97xx_battery from a container of a single struct wm97xx_batt_pdata to the direct point to wm97xx_batt_pdata. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-11-22Input: i8042 - fix typo from i8042_aux_close to i8042_port_closeMarcos Paulo de Souza
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-22Input: synaptics-rmi4 - propagate correct number of rx and tx electrodes to F54Guenter Roeck
F54 diagnostics report functions provide data based on the number of enabled rx and tx electrodes, which is not identical to the number of electrodes reported with F54:Query0 and F54:Query1. Those values report the number of supported electrodes, not the number of enabled electrodes. The number of enabled electrodes can be determined by analyzing F55:Ctrl1 (sensor receiver assignment) and F55:Ctrl2 (sensor transmitter assignment). Propagate the number of enabled electrodes from F55 to F54 to avoid corrupted output if not all electrodes are enabled. Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 ...") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-22Input: synaptics-rmi4 - add support for F55 sensor tuningGuenter Roeck
Sensor tuning support is needed to determine the number of enabled tx and rx electrodes for use in F54 functions. The number of enabled electrodes is not identical to the total number of electrodes as reported with F55:Query0 and F55:Query1. It has to be calculated by analyzing F55:Ctrl1 (sensor receiver assignment) and F55:Ctrl2 (sensor transmitter assignment). Support for additional sensor tuning functions may be added later. Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 ...") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-22Input: synaptics-rmi4 - add support for F34 device reflashNick Dyer
Add support for updating firmware, triggered by a sysfs attribute. This patch has been tested on Synaptics S7300. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-17Input: gpio_keys - set input direction explicitlySudeep Holla
Commit 700a38b27eef ("Input: gpio_keys - switch to using generic device properties") switched to use generic device properties for GPIO keys and commit 5feeca3c1e39 ("Input: gpio_keys - add support for GPIO descriptors") switched from legacy GPIO numbers to GPIO descriptors. Previously devm_gpio_request_one was explicitly passed GPIOF_DIR_IN flag to set the GPIO direction as input. However devm_get_gpiod_from_child doesn't have such provisions and hence fwnode_get_named_gpiod can't set it as input. This breaks few platforms with the following error: " gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ unable to lock HW IRQ <n> for IRQ genirq: Failed to request resources for POWER (irq <x>) on irqchip gpio_keys: Unable to claim irq <x>; error -22 gpio-keys: probe failed with error -22 " This patch fixes the issue by setting input direction explicitly for gpio lines described by generic properties. Fixes: 700a38b27eef ("Input: gpio_keys - switch to using generic device properties") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-27 14:12:58 +0000