aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/sw/rxe/rxe_recv.c
AgeCommit message (Collapse)Author
2021-03-03RDMA/rxe: Fix coding error in rxe_recv.cBob Pearson
[ Upstream commit 7d9ae80e31df57dd3253e1ec514f0000aa588a81 ] check_type_state() in rxe_recv.c is written as if the type bits in the packet opcode were a bit mask which is not correct. This patch corrects this code to compare all 3 type bits to the required type. Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20210127214500.3707-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-09rxe: correctly calculate iCRC for unaligned payloadsSteve Wise
[ Upstream commit 2030abddec6884aaf5892f5724c48fc340e6826f ] If RoCE PDUs being sent or received contain pad bytes, then the iCRC is miscalculated, resulting in PDUs being emitted by RXE with an incorrect iCRC, as well as ingress PDUs being dropped due to erroneously detecting a bad iCRC in the PDU. The fix is to include the pad bytes, if any, in iCRC computations. Note: This bug has caused broken on-the-wire compatibility with actual hardware RoCE devices since the soft-RoCE driver was first put into the mainstream kernel. Fixing it will create an incompatibility with the original soft-RoCE devices, but is necessary to be compatible with real hardware devices. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Steve Wise <larrystevenwise@gmail.com> Link: https://lore.kernel.org/r/20191203020319.15036-2-larrystevenwise@gmail.com Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-09-26IB/rxe: Drop QP0 silentlyZhu Yanjun
[ Upstream commit 536ca245c512aedfd84cde072d7b3ca14b6e1792 ] According to "Annex A16: RDMA over Converged Ethernet (RoCE)": A16.4.3 MANAGEMENT INTERFACES As defined in the base specification, a special Queue Pair, QP0 is defined solely for communication between subnet manager(s) and subnet management agents. Since such an IB-defined subnet management architecture is outside the scope of this annex, it follows that there is also no requirement that a port which conforms to this annex be associated with a QP0. Thus, for end nodes designed to conform to this annex, the concept of QP0 is undefined and unused for any port connected to an Ethernet network. CA16-8: A packet arriving at a RoCE port containing a BTH with the destination QP field set to QP0 shall be silently dropped. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-21IB/rxe: Offload CRC calculation when possibleyonatanc
Use CPU ability to perform CRC calculations, by replacing direct calls to crc32_le() with crypto_shash_updata(). The overall performance gain measured with ib_send_bw tool is 10% and it was tested on "Intel CPU ES-2660 v2 @ 2.20Ghz" CPU. ib_send_bw -d rxe0 -x 1 -n 9000 -e -s $((1024 * 1024 )) -l 100 --------------------------------------------------------------------------------------------- | | bytes | iterations | BW peak[MB/sec] | BW average[MB/sec] | MsgRate[Mpps] | --------------------------------------------------------------------------------------------- | crc32_le | 1048576 | 9000 | inf | 497.60 | 0.000498 | | CRC offload | 1048576 | 9000 | inf | 546.70 | 0.000547 | --------------------------------------------------------------------------------------------- Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-21IB/rxe: Do not export module's private functionParav Pandit
Function rxe_rcv is used internally in RXE and don't need to be exported. This patch removes such export declaration. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-21IB/rxe: Add port protocol statsYonatan Cohen
Expose new counters using the get_hw_stats callback. We expose the following counters: +---------------------+----------------------------------------+ | Name | Description | |---------------------+----------------------------------------| |sent_pkts | number of sent pkts | |---------------------+----------------------------------------| |rcvd_pkts | number of received packets | |---------------------+----------------------------------------| |out_of_sequence | number of errors due to packet | | | transport sequence number | |---------------------+----------------------------------------| |duplicate_request | number of received duplicated packets. | | | A request that previously executed is | | | named duplicated. | |---------------------+----------------------------------------| |rcvd_rnr_err | number of received RNR by completer | |---------------------+----------------------------------------| |send_rnr_err | number of sent RNR by responder | |---------------------+----------------------------------------| |rcvd_seq_err | number of out of sequence packets | | | received | |---------------------+----------------------------------------| |ack_deffered | number of deferred handling of ack | | | packets. | |---------------------+----------------------------------------| |retry_exceeded_err | number of times retry exceeded | |---------------------+----------------------------------------| |completer_retry_err | number of times completer decided to | | | retry | |---------------------+----------------------------------------| |send_err | number of failed send packet | +---------------------+----------------------------------------+ Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-10IB/rxe: Suppress sparse warningsBart Van Assche
Avoid that sparse complains about using 0 as a pointer, about missing function declarations and also avoid that sparse complains about endianness. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Andrew Boyer <andrew.boyer@dell.com> Cc: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-12IB/rxe: Remove buffer used for printing IP addressAndrew Boyer
Avoid smashing the stack when an ICRC error occurs on an IPv6 network. Signed-off-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-06IB/rxe: improved debug prints & code cleanupParav Pandit
1. Debugging qp state transitions and qp errors in loopback and multiple QP tests is difficult without qp numbers in debug logs. This patch adds qp number to important debug logs. 2. Instead of having rxe: prefix in few logs and not having in few logs, using uniform module name prefix using pr_fmt macro. 3. Code cleanup for various warnings reported by checkpatch for incomplete unsigned data type, line over 80 characters, return statements. Signed-off-by: Parav Pandit <pandit.parav@gmail.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/rxe: fix GFP_KERNEL in spinlock contextAlexey Khoroshilov
There is skb_clone(skb, GFP_KERNEL) in spinlock context in rxe_rcv_mcast_pkt(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-04Soft RoCE driverMoni Shoua
Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>