aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-imx.c
AgeCommit message (Collapse)Author
2020-03-24i2c: drivers: Use generic definitions for bus frequenciesAndy Shevchenko
Since we have generic definitions for bus frequencies, let's use them. Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Robert Richter <rrichter@marvell.com> Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Elie Morisse <syniurge@gmail.com> Acked-by: Nehal Shah <nehal-bakulchandra.shah@amd.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-21i2c: imx: remove duplicate print after platform_get_irq()Tang Bin
We don't need dev_err() message because when something goes wrong, platform_get_irq() has print an error message itself, so we should remove duplicate dev_err(). Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-02-26i2c: imx: implement master_xfer_atomic callbackStefan Lengfeld
Rework the read and write code paths in the driver to support operation in atomic contexts. To achieve this, the driver must not rely on IRQs and not call schedule(), e.g. via a sleep routine, in these cases. With this patch the driver supports normal operation, DMA transfers and now the polling mode or also called sleep-free or IRQ-less operation. It makes the code not simpler or easier to read, but atomic I2C transfers are needed on some hardware configurations, e.g. to trigger reboots on an external PMIC chip. Signed-off-by: Stefan Lengfeld <contact@stefanchrist.eu> [m.felsch@pengutronix.de: integrate https://patchwork.ozlabs.org/patch/1085943/ review feedback] [m.felsch@pengutronix.de: adapt commit message] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Lengfeld <contact@stefanchrist.eu> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-09-24Merge branch 'i2c/for-5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - new driver for ICY, an Amiga Zorro card :) - axxia driver gained slave mode support, NXP driver gained ACPI - the slave EEPROM backend gained 16 bit address support - and lots of regular driver updates and reworks * 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits) i2c: tegra: Move suspend handling to NOIRQ phase i2c: imx: ACPI support for NXP i2c controller i2c: uniphier(-f): remove all dev_dbg() i2c: uniphier(-f): use devm_platform_ioremap_resource() i2c: slave-eeprom: Add comment about address handling i2c: exynos5: Remove IRQF_ONESHOT i2c: stm32f7: Make structure stm32f7_i2c_algo constant i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe i2c-eeprom_slave: Add support for more eeprom models i2c: fsi: Add of_put_node() before break i2c: synquacer: Make synquacer_i2c_ops constant i2c: hix5hd2: Remove IRQF_ONESHOT i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond watchdog: iTCO: Add support for Cannon Lake PCH iTCO i2c: iproc: Make bcm_iproc_i2c_quirks constant i2c: iproc: Add full name of devicetree node to adapter name i2c: piix4: Add ACPI support i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h i2c: ocores: use request_any_context_irq() to register IRQ handler i2c: designware: Fix optional reset error handling ...
2019-09-13i2c: imx: ACPI support for NXP i2c controllerChuanhua Han
Enable NXP i2c controller to boot with ACPI. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: Udit Kumar <udit.kumar@nxp.com> Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-14Revert "i2c: imx: improve the error handling in i2c_imx_dma_request()"Fabio Estevam
Since commit e1ab9a468e3b ("i2c: imx: improve the error handling in i2c_imx_dma_request()") when booting with the DMA driver as module (such as CONFIG_FSL_EDMA=m) the following endless clk warnings are seen: [ 153.077831] ------------[ cut here ]------------ [ 153.082528] WARNING: CPU: 0 PID: 15 at drivers/clk/clk.c:924 clk_core_disable_lock+0x18/0x24 [ 153.093077] i2c0 already disabled [ 153.096416] Modules linked in: [ 153.099521] CPU: 0 PID: 15 Comm: kworker/0:1 Tainted: G W 5.2.0+ #321 [ 153.107290] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) [ 153.113772] Workqueue: events deferred_probe_work_func [ 153.118979] [<c0019560>] (unwind_backtrace) from [<c0014734>] (show_stack+0x10/0x14) [ 153.126778] [<c0014734>] (show_stack) from [<c083f8dc>] (dump_stack+0x9c/0xd4) [ 153.134051] [<c083f8dc>] (dump_stack) from [<c0031154>] (__warn+0xf8/0x124) [ 153.141056] [<c0031154>] (__warn) from [<c0031248>] (warn_slowpath_fmt+0x38/0x48) [ 153.148580] [<c0031248>] (warn_slowpath_fmt) from [<c040fde0>] (clk_core_disable_lock+0x18/0x24) [ 153.157413] [<c040fde0>] (clk_core_disable_lock) from [<c058f520>] (i2c_imx_probe+0x554/0x6ec) [ 153.166076] [<c058f520>] (i2c_imx_probe) from [<c04b9178>] (platform_drv_probe+0x48/0x98) [ 153.174297] [<c04b9178>] (platform_drv_probe) from [<c04b7298>] (really_probe+0x1d8/0x2c0) [ 153.182605] [<c04b7298>] (really_probe) from [<c04b7554>] (driver_probe_device+0x5c/0x174) [ 153.190909] [<c04b7554>] (driver_probe_device) from [<c04b58c8>] (bus_for_each_drv+0x44/0x8c) [ 153.199480] [<c04b58c8>] (bus_for_each_drv) from [<c04b746c>] (__device_attach+0xa0/0x108) [ 153.207782] [<c04b746c>] (__device_attach) from [<c04b65a4>] (bus_probe_device+0x88/0x90) [ 153.215999] [<c04b65a4>] (bus_probe_device) from [<c04b6a04>] (deferred_probe_work_func+0x60/0x90) [ 153.225003] [<c04b6a04>] (deferred_probe_work_func) from [<c004f190>] (process_one_work+0x204/0x634) [ 153.234178] [<c004f190>] (process_one_work) from [<c004f618>] (worker_thread+0x20/0x484) [ 153.242315] [<c004f618>] (worker_thread) from [<c0055c2c>] (kthread+0x118/0x150) [ 153.249758] [<c0055c2c>] (kthread) from [<c00090b4>] (ret_from_fork+0x14/0x20) [ 153.257006] Exception stack(0xdde43fb0 to 0xdde43ff8) [ 153.262095] 3fa0: 00000000 00000000 00000000 00000000 [ 153.270306] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 153.278520] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 153.285159] irq event stamp: 3323022 [ 153.288787] hardirqs last enabled at (3323021): [<c0861c4c>] _raw_spin_unlock_irq+0x24/0x2c [ 153.297261] hardirqs last disabled at (3323022): [<c040d7a0>] clk_enable_lock+0x10/0x124 [ 153.305392] softirqs last enabled at (3322092): [<c000a504>] __do_softirq+0x344/0x540 [ 153.313352] softirqs last disabled at (3322081): [<c00385c0>] irq_exit+0x10c/0x128 [ 153.320946] ---[ end trace a506731ccd9bd703 ]--- This endless clk warnings behaviour is well explained by Andrey Smirnov: "Allocating DMA after registering I2C adapter can lead to infinite probing loop, for example, consider the following scenario: 1. i2c_imx_probe() is called and successfully registers an I2C adapter via i2c_add_numbered_adapter() 2. As a part of i2c_add_numbered_adapter() new I2C slave devices are added from DT which results in a call to driver_deferred_probe_trigger() 3. i2c_imx_probe() continues and calls i2c_imx_dma_request() which due to lack of proper DMA driver returns -EPROBE_DEFER 4. i2c_imx_probe() fails, removes I2C adapter and returns -EPROBE_DEFER, which places it into deferred probe list 5. Deferred probe work triggered in #2 above kicks in and calls i2c_imx_probe() again thus bringing us to step #1" So revert commit e1ab9a468e3b ("i2c: imx: improve the error handling in i2c_imx_dma_request()") and restore the old behaviour, in order to avoid regressions on existing setups. Cc: <stable@vger.kernel.org> Reported-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reported-by: Russell King <linux@armlinux.org.uk> Fixes: e1ab9a468e3b ("i2c: imx: improve the error handling in i2c_imx_dma_request()") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-05-27i2c: imx: Use __maybe_unused instead of #if CONFIG_PMAnson Huang
Use __maybe_unused for runtime PM related functions instead of #if CONFIG_PM to simply the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-04-24i2c: imx: correct the method of getting private data in notifier_callAnson Huang
The way of getting private imx_i2c_struct in i2c_imx_clk_notifier_call() is incorrect, should use clk_change_nb element to get correct address and avoid below kernel dump during POST_RATE_CHANGE notify by clk framework: Unable to handle kernel paging request at virtual address 03ef1488 pgd = (ptrval) [03ef1488] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: events reduce_bus_freq_handler PC is at i2c_imx_set_clk+0x10/0xb8 LR is at i2c_imx_clk_notifier_call+0x20/0x28 pc : [<806a893c>] lr : [<806a8a04>] psr: a0080013 sp : bf399dd8 ip : bf3432ac fp : bf7c1dc0 r10: 00000002 r9 : 00000000 r8 : 00000000 r7 : 03ef1480 r6 : bf399e50 r5 : ffffffff r4 : 00000000 r3 : bf025300 r2 : bf399e50 r1 : 00b71b00 r0 : bf399be8 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 4e03004a DAC: 00000051 Process kworker/2:1 (pid: 38, stack limit = 0x(ptrval)) Stack: (0xbf399dd8 to 0xbf39a000) 9dc0: 806a89e4 00000000 9de0: ffffffff bf399e50 00000002 806a8a04 806a89e4 80142900 ffffffff 00000000 9e00: bf34ef18 bf34ef04 00000000 ffffffff bf399e50 80142d84 00000000 bf399e6c 9e20: bf34ef00 80f214c4 bf025300 00000002 80f08d08 bf017480 00000000 80142df0 9e40: 00000000 80166ed8 80c27638 8045de58 bf352340 03ef1480 00b71b00 0f82e242 9e60: bf025300 00000002 03ef1480 80f60e5c 00000001 8045edf0 00000002 8045eb08 9e80: bf025300 00000002 03ef1480 8045ee10 03ef1480 8045eb08 bf01be40 00000002 9ea0: 03ef1480 8045ee10 07de2900 8045eb08 bf01b780 00000002 07de2900 8045ee10 9ec0: 80c27898 bf399ee4 bf020a80 00000002 1f78a400 8045ee10 80f60e5c 80460514 9ee0: 80f60e5c bf01b600 bf01b480 80460460 0f82e242 bf383a80 bf383a00 80f60e5c 9f00: 00000000 bf7c1dc0 80f60e70 80460564 80f60df0 80f60d24 80f60df0 8011e72c 9f20: 00000000 80f60df0 80f60e6c bf7c4f00 00000000 8011e7ac bf274000 8013bd84 9f40: bf7c1dd8 80f03d00 bf274000 bf7c1dc0 bf274014 bf7c1dd8 80f03d00 bf398000 9f60: 00000008 8013bfb4 00000000 bf25d100 bf25d0c0 00000000 bf274000 8013bf88 9f80: bf25d11c bf0cfebc 00000000 8014140c bf25d0c0 801412ec 00000000 00000000 9fa0: 00000000 00000000 00000000 801010e8 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<806a893c>] (i2c_imx_set_clk) from [<806a8a04>] (i2c_imx_clk_notifier_call+0x20/0x28) [<806a8a04>] (i2c_imx_clk_notifier_call) from [<80142900>] (notifier_call_chain+0x44/0x84) [<80142900>] (notifier_call_chain) from [<80142d84>] (__srcu_notifier_call_chain+0x44/0x98) [<80142d84>] (__srcu_notifier_call_chain) from [<80142df0>] (srcu_notifier_call_chain+0x18/0x20) [<80142df0>] (srcu_notifier_call_chain) from [<8045de58>] (__clk_notify+0x78/0xa4) [<8045de58>] (__clk_notify) from [<8045edf0>] (__clk_recalc_rates+0x60/0xb4) [<8045edf0>] (__clk_recalc_rates) from [<8045ee10>] (__clk_recalc_rates+0x80/0xb4) Code: e92d40f8 e5903298 e59072a0 e1530001 (e5975008) ---[ end trace fc7f5514b97b6cbb ]--- Fixes: 90ad2cbe88c2 ("i2c: imx: use clk notifier for rate changes") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2019-04-06i2c: imx: don't leak the i2c adapter on errorLaurentiu Tudor
Make sure to free the i2c adapter on the error exit path. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: e1ab9a468e3b ("i2c: imx: improve the error handling in i2c_imx_dma_request()") Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-22i2c: imx: Fix inconsistent IS_ERR and PTR_ERR in i2c_imx_dma_request()YueHaibing
Change the call to PTR_ERR to access the value just tested by IS_ERR. Fixes: 5b3a23a3cc94 ("i2c: imx: notify about real errors on dma i2c_imx_dma_request") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Esben Haabendal <esben@haabendal.dk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-15i2c: imx: improve the error handling in i2c_imx_dma_request()Oleksij Rempel
Improve the error handling in i2c_imx_dma_request() and let it return an error indication that the caller then can handle accordingly. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-15i2c: imx: notify about real errors on dma i2c_imx_dma_requestOleksij Rempel
At least on i.MX5x, the DMA events for I2C and SDHC use the same channel and there can only be a single user. So in this case there should be no message emitted that looks like an error if the I2C device doesn't have an assigned DMA channel. In contrast real problems that were only emitted at debug level before should be described at a higher level to be better visible and so understandable. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-27i2c: imx: don't print error message on probe deferLucas Stach
Probe deferral is a normal operating condition in the probe function, so don't spam the log with an error in this case. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-21Merge branch 'i2c/for-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - the core has now a lockless variant of i2c_smbus_xfer. Some open coded versions of this got removed in drivers. This also enables proper SCCB support in regmap. - locking got a more precise naming. i2c_{un}lock_adapter() had to go, and we know use i2c_lock_bus() consistently with flags like I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity. - the gpio fault injector got a new delicate testcase - the bus recovery procedure got fixed to handle the new testcase correctly - a new quirk flag for controllers not able to handle zero length messages together with driver updates to use it - new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl family S900 - and a good set of driver improvements and bugfixes * 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits) i2c: rcar: implement STOP and REP_START according to docs i2c: rcar: refactor private flags i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes dt-bindings: i2c: rcar: Add r8a774a1 support dt-bindings: i2c: sh_mobile: Add r8a774a1 support i2c: imx: Simplify stopped state tracking i2c: imx: Fix race condition in dma read i2c: pasemi: remove hardcoded bus numbers on smbus i2c: designware: Add SPDX license tag i2c: designware: Convert to use struct i2c_timings i2c: core: Parse SDA hold time from firmware i2c: designware-pcidrv: Mark expected switch fall-through i2c: amd8111: Mark expected switch fall-through i2c: sh_mobile: use core to detect 'no zero length read' quirk i2c: xlr: use core to detect 'no zero length' quirk i2c: rcar: use core to detect 'no zero length' quirk i2c: stu300: use core to detect 'no zero length' quirk i2c: pmcmsp: use core to detect 'no zero length' quirk i2c: mxs: use core to detect 'no zero length' quirk ...
2018-08-20i2c: imx: Simplify stopped state trackingEsben Haabendal
Always update the stopped state when busy status have been checked. This is identical to what was done before, with the exception of error handling. Without this change, some errors cause the stopped state to be left in incorrect state in i2c_imx_stop(), i2c_imx_dma_read(), i2c_imx_read() and i2c_imx_xfer(). Signed-off-by: Esben Haabendal <eha@deif.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-20i2c: imx: Fix race condition in dma readEsben Haabendal
This fixes a race condition, where the DMAEN bit ends up being set after I2C slave has transmitted a byte following the dummy read. When that happens, an interrupt is generated instead, and no DMA request is generated to kickstart the DMA read, and a timeout happens after DMA_TIMEOUT (1 sec). Fixed by setting the DMAEN bit before the dummy read. Signed-off-by: Esben Haabendal <eha@deif.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-07-24i2c: imx: use open drain for recovery GPIOWolfram Sang
I2C is open drain, so request the GPIO accordingly, even if pinmux did set it up correctly for in-kernel users in this case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-07-23i2c: imx: Fix reinit_completion() useEsben Haabendal
Make sure to call reinit_completion() before dma is started to avoid race condition where reinit_completion() is called after complete() and before wait_for_completion_timeout(). Signed-off-by: Esben Haabendal <eha@deif.com> Fixes: ce1a78840ff7 ("i2c: imx: add DMA support for freescale i2c driver") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-05-29i2c: busses: make use of i2c_8bit_addr_from_msgPeter Rosin
Because it looks neater. For diolan, this allows factoring out some code that is now common between if and else. For eg20t, pch_i2c_writebytes is always called with a write in msgs->flags, and pch_i2c_readbytes with a read. For imx, i2c_imx_dma_write and i2c_imx_write are always called with a write in msgs->flags, and i2c_imx_read with a read. For qup, qup_i2c_write_tx_fifo_v1 is always called with a write in qup->msg->flags. For stu300, also restructure debug output for resends, since that code as a result is only handling debug output. Reviewed-by: Guenter Roeck <linux@roeck-us.net> [diolan] Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [efm32 and imx] Acked-by: Linus Walleij <linus.walleij@linaro.org> [stu300] Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-24i2c: imx: Switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-03i2c: imx: avoid taking clk_prepare mutex in PM callbacksLucas Stach
This is unsafe, as the runtime PM callbacks are called from the PM workqueue, so this may deadlock when handling an i2c attached clock, which may already hold the clk_prepare mutex from another context. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-03i2c: imx: use clk notifier for rate changesLucas Stach
Instead of repeatedly calling clk_get_rate for each transfer, register a clock notifier to update the cached divider value each time the clock rate actually changes. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-12i2c: imx: Include the right GPIO headerLinus Walleij
<linux/of_gpio.h> is not used in this file, by <linux/gpio/consumer.h> is. Someone is just lucky with their implicit includes. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-07i2c: imx: use proper GPIO directions for recoveryWolfram Sang
When converting to GPIOD, the GPIO directions of SCL/SDA have been swapped. Fix it! Fixes: ad36a27959cabb ("i2c: imx: switch to using gpiod for bus recovery gpios") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27i2c: imx: switch to using gpiod for bus recovery gpiosPhil Reid
Change the driver to use the gpio descriptors for the bus recovery information instead of the deprecated integer interface. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-13i2c: imx: fix misleading bus recovery debug messageClemens Gruber
The arguments for SDA and SCL were swapped. Fix it. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-13i2c: imx: use IRQF_SHARED mode to request IRQWei Jinhua
Some SoC share one irq number between I2C controllers. For example, on the LS2088 board, I2C 1 and I2C 2 share one irq number. In this case, only one I2C controller can register successfully, and others will fail. Signed-off-by: Wei Jinhua <wei.jinhua1@zte.com.cn> Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-22i2c: imx: Use correct function to write to registerMichail Georgios Etairidis
The i2c-imx driver incorrectly uses readb()/writeb() to read and write to the appropriate registers when performing a repeated start. The appropriate imx_i2c_read_reg()/imx_i2c_write_reg() functions should be used instead. Performing a repeated start results in a kernel panic. The platform is imx. Signed-off-by: Michail G Etairidis <m.etairidis@beck-ipc.com> Fixes: ce1a78840ff7 ("i2c: imx: add DMA support for freescale i2c driver") Fixes: 054b62d9f25c ("i2c: imx: fix the i2c bus hang issue when do repeat restart") Acked-by: Fugang Duan <fugang.duan@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09i2c: busses: constify i2c_algorithm structuresBhumika Goyal
Declare i2c_algorithm structures as const as they are only stored in the algo field of an i2c_adapter structure. This field is of type const, so i2c_algorithm structures having this property can be made const too. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> for Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-10-25i2c: imx: defer probe if bus recovery GPIOs are not readyStefan Agner
Some SoC might load the GPIO driver after the I2C driver and using the I2C bus recovery mechanism via GPIOs. In this case it is crucial to defer probing if the GPIO request functions do so, otherwise the I2C driver gets loaded without recovery mechanisms enabled. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2016-09-15i2c: imx: make bus recovery through pinctrl optionalYang Li
Since commit 1c4b6c3bcf30 ("i2c: imx: implement bus recovery") the driver starts to use gpio/pinctrl to support optional bus recovery feature. But pinctrl is not always usable. There are platforms such as ls1021a and ls1043a that don't support pinctrl, and it could just be broken due to old/broken device tree. The patch makes it really optional that the probe function won't bailout on pinctrl problems instead it just disables bus recovery and prints out notification when there is problem with pinctrl. Since pinctrl is only used by bus recovery in this driver, move pinctrl initialization into bus recovery init function to prevent confusion. Signed-off-by: Li Yang <leoyang.li@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-22i2c: don't print error when adding adapter failsWolfram Sang
The core will do this for us now. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-04-26i2c: imx: reduce load by using usleep_range instead of udelayOleksij Rempel
Documentation/timers/timers-howto.txt recommends to use usleep_range on delays > 10usec. According to my test results with Neonode zForce touchscreen driver, usleep_range indeed reduces CPU load. Stats collected with "./perf record -a -g -F 1000 sleep 10" i2c-imx with udelay(50): 34.19% 0.00% irq/220-Neonode [kernel.kallsyms] [k] irq_thread ---irq_thread |--33.75%--irq_thread_fn | |--19.27%--0x7f08a878 | | i2c_master_recv | | i2c_transfer | | __i2c_transfer | | i2c_imx_xfer | | |--11.71%--i2c_imx_trx_complete | | |--5.70%--i2c_imx_start <<<<---------------- | | | |--5.38%--__timer_const_udelay | | | | __timer_delay | | | | --5.07%--read_current_timer i2c-imx with usleep_range(50,100) 29.08% 0.00% irq/220-Neonode [kernel.kallsyms] [k] irq_thread ---irq_thread |--28.89%--irq_thread_fn | |--17.21%--0x7f08a878 | | i2c_master_recv | | |--17.14%--i2c_transfer | | | __i2c_transfer | | | i2c_imx_xfer | | | |--14.29%--i2c_imx_trx_complete | | | |--1.42%--i2c_imx_start <<<<---------- | | | | |--0.71%--usleep_range | | | | |--0.53%--i2c_imx_bus_busy Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-03-03i2c: imx: remove extra spaces.Dmitriy Baranov
Signed-off-by: Dmitriy Baranov <dbaranov@dev.rtsoft.ru> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-10i2c: imx: fix i2c resource leak with dma transferGao Pan
In i2c_imx_dma_xfer(), when dmaengine_submit() returns error, the context goto label err_submit and then return. However, the memory allocated for txdesc has not been freed yet, which leads to resource leak. Signed-off-by: Gao Pan <b54642@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-04i2c: imx: Remove unneeded commentsFabio Estevam
These multi-lines comments do not follow the standard kernel coding style. In fact, they are not useful comments, so get rid of them. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-03i2c: imx: improve code readabilityGao Pan
Replace of_get_named_gpio_flags with of_get_named_gpio because the latter has less parameters, which improves code readability. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Gao Pan <b54642@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-03i2c: imx: Improve message log when DMA is not usedFabio Estevam
When DMA cannot be used, it is better to state that the I2C controller will operate in PIO mode. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-03i2c: imx: add runtime pm support to improve the performanceGao Pan
In our former i2c driver, i2c clk is enabled and disabled in xfer function, which contributes to power saving. However, the clk enable process brings a busy wait delay until the core is stable. As a result, the performance is sacrificed. To weigh the power consumption and i2c bus performance, runtime pm is the good solution for it. The clk is enabled when a i2c transfer starts, and disabled after a specifically defined delay. If CONFIG_PM is disabled the net result of this patch is that the clock is never disabled. Without the patch the test case (many eeprom reads) executes with approx: real 1m7.735s user 0m0.488s sys 0m20.040s With the patch the same test case (many eeprom reads) executes with approx: real 0m54.241s user 0m0.440s sys 0m5.920s Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Gao Pan <b54642@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [wsa: sorted includes] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-03i2c: imx: init bus recovery info before adding i2c adapterGao Pan
During driver probe, i2c_imx_init_recovery_info() must come before i2c_add_numbered_adapter(), because the get/set_scl() functions are assigned in i2c_register_adapter() under the conditon that bus recover_info are initialized. Otherwise, get/set_scl() function pointers never get assigned. In such case, when i2c_generic_gpio_recovery() is used for bus recovery, there will be kernel crash because bri->set_scl is NULL. The solution to this bug is moving i2c_imx_init_recovery_info() before i2c_register_adapter(). Signed-off-by: Gao Pan <b54642@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2015-11-20i2c: imx: fix a compiling errorHou Zhiqiang
drivers/i2c/busses/i2c-imx.c:978:2: error: implicit declaration of function ‘pinctrl_select_state’ [-Werror=implicit-function-declaration] pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_gpio); ^ Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-23i2c: imx: Use -ENXIO as error in the NACK caseFabio Estevam
According to Documentation/i2c/fault-codes the response to a bus NACK should be -ENXIO, so fix the error code. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-23i2c: imx: implement bus recoveryGao Pan
Implement bus recovery methods for i2c-imx so we can recover from situations where SCL/SDA are stuck low. Once i2c bus SCL/SDA are stuck low during transfer, config the i2c pinctrl to gpio mode by calling pinctrl sleep set function, and then use GPIO to emulate the i2c protocol to send nine dummy clock to recover i2c device. After recovery, set i2c pinctrl to default group setting. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Gao Pan <b54642@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-05-12i2c: constify platform_device_idKrzysztof Kozlowski
The platform_device_id is not modified by these drivers and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-03-15i2c: imx: match return type of wait_for_completion_timeoutNicholas Mc Guire
return type of wait_for_completion_timeout is unsigned long not int. An appropriate variable of type unsigned long is introduced and the assignments fixed up. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-22i2c: imx: whitespace and checkpatch cleanupPhilipp Zabel
This patch fixes up some whitespace issues and addresses a few checkpatch warnings. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-14i2c: imx: remove unused return value assignmentsPhilipp Zabel
The ret variable is set and never used in the error path of i2c_imx_dma_request. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-13i2c: imx: fix handling of wait_for_completion_timeout resultNicholas Mc Guire
wait_for_completion_timeout does not return negative values so "result" handling here should be simplified to cover the actually possible cases only. Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-19i2c: imx: simplify i2c_imx_dma_write() a littleWolfram Sang
Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Yao Yuan <yao.yuan@freescale.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-26 15:01:53 +0000