Age | Commit message (Collapse) | Author |
|
|
|
commit 2fe6899e36aa174abefd017887f9cfe0cb60c43a upstream.
A number of issues are fixed relating to sysfs input validation:-
1) bb_ctrl_store() - incorrect compare of bit select field to absolute
value. Reworked per ETMv4 specification.
2) seq_event_store() - incorrect mask value - register has two
event values.
3) cyc_threshold_store() - must mask with max before checking min
otherwise wrapped values can set illegal value below min.
4) res_ctrl_store() - update to mask off all res0 bits.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Fixes: a77de2637c9eb ("coresight: etm4x: moving sysFS entries to a dedicated file")
Cc: stable <stable@vger.kernel.org> # 4.9+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
|
|
commit 1004ce4c255fc3eb3ad9145ddd53547d1b7ce327 upstream.
Synchronization is recommended before disabling the trace registers
to prevent any start or stop points being speculative at the point
of disabling the unit (section 7.3.77 of ARM IHI 0064D).
Synchronization is also recommended after programming the trace
registers to ensure all updates are committed prior to normal code
resuming (section 4.3.7 of ARM IHI 0064D).
Let's ensure these syncronization points are present in the code
and clearly commented.
Note that we could rely on the barriers in CS_LOCK and
coresight_disclaim_device_unlocked or the context switch to user
space - however coresight may be of use in the kernel.
On armv8 the mb macro is defined as dsb(sy) - Given that the etm4x is
only used on armv8 let's directly use dsb(sy) instead of mb(). This
removes some ambiguity and makes it easier to correlate the code with
the TRM.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Fixed capital letter for "use" in title]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 923c488e675803a3aa6982a1105e46a4a1780341 from
git@git.assembla.com:cavium/WindRiver.linux.git
Remove the assumption that there is common sink
for all the trace sources.
Note: This is fixed only for the sysfs interface.
Change-Id: Iefc073a2410d211b5e6b743f5bea404dbd9ea995
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/16637
[Kevin: Just some minor context mods in order to port to linux-yocto]
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
|
|
commit 23a0e5dde140f37c47db1c5a31f2569524c19769 from
git@git.assembla.com:cavium/WindRiver.linux.git
1. For each HW issue, corresponding driver option will be enabled
as listed below.
- Buffer size multiplier used is 8 byte instead of 4 bytes
Driver option CORESIGHT_OPTS_BUFFSIZE_8BX handles this.
- Non secure trace buffer not supported
Driver option CORESIGHT_OPTS_SECURE_BUFF handles this.
Driver uses SMC calls for managing secure trace buffer.
- Control registers not reset upon cpu reset
Driver option CORESIGHT_OPTS_RESET_CTL_REG handles this.
2. SMC call for secure buffer allocation do have the option of
requesting LLC locked buffer. This can be enabled using
"cache-lock" property in the DTS.
3. We do make an assumption that secure trace buffer is equally partitioned
among all the cpus. This will keep the buffer allocation simplified
in secure world. Hence we expect, arm-buffer-size DTS attribute value
be same for all the ETR nodes.
Change-Id: I4a6acaf0dc38fb48c27204674458e173e25f83c0
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/16636
[Kevin: Adjust the code according to the changes made by commit
75f4e3619fe2]
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
|
|
commit 396e26d0a6b7b5355647b9f28b94fba51fd32f22 from
git@git.assembla.com:cavium/WindRiver.linux.git
Add device id for Marvell OcteonTx CN9xxx TMC device.
Change-Id: I0ce1a0daf25452bb1791b68da02a8405ada47587
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/16635
[Kevin: Use macro CS_AMBA_ID_DATA()]
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
|
|
commit d51ad1e9deca6fde2b7bbf3fa7e48b9106ac4de4 from
git@git.assembla.com:cavium/WindRiver.linux.git
Add device id for Marvell OcteonTx CN9xxx ETM device.
Change-Id: If679a26626c5a2feb744af177cee438e3a1a26da
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/16634
[Kevin: Use CS_AMBA_ID() instead of ETM4x_AMBA_ID()]
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
|
|
commit 5511c0c309db4c526a6e9f8b2b8a1483771574bc upstream.
While running the linux-next with CONFIG_DEBUG_LOCKS_ALLOC enabled,
I get the following splat.
BUG: key ffffcb5636929298 has not been registered!
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 1 PID: 53 at kernel/locking/lockdep.c:3669 lockdep_init_map+0x164/0x1f0
CPU: 1 PID: 53 Comm: kworker/1:1 Tainted: G W 5.2.0-next-20190712-00015-g00ad4634222e-dirty #603
Workqueue: events amba_deferred_retry_func
pstate: 60c00005 (nZCv daif +PAN +UAO)
pc : lockdep_init_map+0x164/0x1f0
lr : lockdep_init_map+0x164/0x1f0
[ trimmed ]
Call trace:
lockdep_init_map+0x164/0x1f0
__kernfs_create_file+0x9c/0x158
sysfs_add_file_mode_ns+0xa8/0x1d0
sysfs_add_file_to_group+0x88/0xd8
etm_perf_add_symlink_sink+0xcc/0x138
coresight_register+0x110/0x280
tmc_probe+0x160/0x420
[ trimmed ]
---[ end trace ab4cc669615ba1b0 ]---
Fix this by initialising the dynamically allocated attribute properly.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: bb8e370bdc14 ("coresight: perf: Add "sinks" group to PMU directory")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Fixed a typograhic error in the changelog]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190801172323.18359-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 024c1fd9dbcc1d8a847f1311f999d35783921b7f upstream.
During a perf session we try to allocate buffers on the "node" associated
with the CPU the event is bound to. If it is not bound to a CPU, we
use the current CPU node, using smp_processor_id(). However this is unsafe
in a pre-emptible context and could generate the splats as below :
BUG: using smp_processor_id() in preemptible [00000000] code: perf/2544
caller is tmc_alloc_etf_buffer+0x5c/0x60
CPU: 2 PID: 2544 Comm: perf Not tainted 5.1.0-rc6-147786-g116841e #344
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019
Call trace:
dump_backtrace+0x0/0x150
show_stack+0x14/0x20
dump_stack+0x9c/0xc4
debug_smp_processor_id+0x10c/0x110
tmc_alloc_etf_buffer+0x5c/0x60
etm_setup_aux+0x1c4/0x230
rb_alloc_aux+0x1b8/0x2b8
perf_mmap+0x35c/0x478
mmap_region+0x34c/0x4f0
do_mmap+0x2d8/0x418
vm_mmap_pgoff+0xd0/0xf8
ksys_mmap_pgoff+0x88/0xf8
__arm64_sys_mmap+0x28/0x38
el0_svc_handler+0xd8/0x138
el0_svc+0x8/0xc
Use NUMA_NO_NODE hint instead of using the current node for events
not bound to CPUs.
Fixes: 2e499bbc1a929ac ("coresight: tmc: implementing TMC-ETF AUX space API")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: stable <stable@vger.kernel.org> # 4.7+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190620221237.3536-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
preemptible
commit 3a8710392db2c70f74aed6f06b16e8bec0f05a35 upstream.
During a perf session we try to allocate buffers on the "node" associated
with the CPU the event is bound to. If it is not bound to a CPU, we
use the current CPU node, using smp_processor_id(). However this is unsafe
in a pre-emptible context and could generate the splats as below :
BUG: using smp_processor_id() in preemptible [00000000] code: perf/1743
caller is tmc_alloc_etr_buffer+0x1bc/0x1f0
CPU: 1 PID: 1743 Comm: perf Not tainted 5.1.0-rc6-147786-g116841e #344
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019
Call trace:
dump_backtrace+0x0/0x150
show_stack+0x14/0x20
dump_stack+0x9c/0xc4
debug_smp_processor_id+0x10c/0x110
tmc_alloc_etr_buffer+0x1bc/0x1f0
etm_setup_aux+0x1c4/0x230
rb_alloc_aux+0x1b8/0x2b8
perf_mmap+0x35c/0x478
mmap_region+0x34c/0x4f0
do_mmap+0x2d8/0x418
vm_mmap_pgoff+0xd0/0xf8
ksys_mmap_pgoff+0x88/0xf8
__arm64_sys_mmap+0x28/0x38
el0_svc_handler+0xd8/0x138
el0_svc+0x8/0xc
Use NUMA_NO_NODE hint instead of using the current node for events
not bound to CPUs.
Fixes: 22f429f19c4135d51e9 ("coresight: etm-perf: Add support for ETR backend")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: stable <stable@vger.kernel.org> # 4.20+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190620221237.3536-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3ff44563dbb02456a33f2a42000f04db4ef19a8f upstream.
During a perf session we try to allocate buffers on the "node" associated
with the CPU the event is bound to. If it's not bound to a CPU, we use
the current CPU node, using smp_processor_id(). However this is unsafe
in a pre-emptible context and could generate the splats as below :
BUG: using smp_processor_id() in preemptible [00000000] code: perf/1743
caller is alloc_etr_buf.isra.6+0x80/0xa0
CPU: 1 PID: 1743 Comm: perf Not tainted 5.1.0-rc6-147786-g116841e #344
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019
Call trace:
dump_backtrace+0x0/0x150
show_stack+0x14/0x20
dump_stack+0x9c/0xc4
debug_smp_processor_id+0x10c/0x110
alloc_etr_buf.isra.6+0x80/0xa0
tmc_alloc_etr_buffer+0x12c/0x1f0
etm_setup_aux+0x1c4/0x230
rb_alloc_aux+0x1b8/0x2b8
perf_mmap+0x35c/0x478
mmap_region+0x34c/0x4f0
do_mmap+0x2d8/0x418
vm_mmap_pgoff+0xd0/0xf8
ksys_mmap_pgoff+0x88/0xf8
__arm64_sys_mmap+0x28/0x38
el0_svc_handler+0xd8/0x138
el0_svc+0x8/0xc
Use NUMA_NO_NODE hint instead of using the current node for events
not bound to CPUs.
Fixes: 855ab61c16bf70b646 ("coresight: tmc-etr: Refactor function tmc_etr_setup_perf_buf()")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190620221237.3536-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 730766bae3280a25d40ea76a53dc6342e84e6513 upstream.
During a perf session we try to allocate buffers on the "node" associated
with the CPU the event is bound to. If it is not bound to a CPU, we
use the current CPU node, using smp_processor_id(). However this is unsafe
in a pre-emptible context and could generate the splats as below :
BUG: using smp_processor_id() in preemptible [00000000] code: perf/2544
Use NUMA_NO_NODE hint instead of using the current node for events
not bound to CPUs.
Fixes: 2997aa4063d97fdb39 ("coresight: etb10: implementing AUX API")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: stable <stable@vger.kernel.org> # 4.6+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190620221237.3536-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0530ef6b41e80c5cc979e0e50682302161edb6b7 upstream.
The "drvdata->atclk" clock is optional, but if it gets set to an error
pointer then we're accidentally return an uninitialized variable instead
of success.
Fixes: 78e6427b4e7b ("coresight: funnel: Support static funnel")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190620221237.3536-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since CoreSight hardware topology can use a 'hidden' funnel in the
trace data path, this kind funnel doesn't have register for accessing
and is used by default from hardware design perspective. Below is an
example for related hardware topology:
+------+ +------+
| cpu0 |->| ETM |-\
+------+ +------+ \-> +--------+ +-----+
...... | Funnel |->| ETF |-\ Hidden funnel
+------+ +------+ /-> +--------+ +-----+ \ |
| cpu3 |->| ETM |-/ \ V
+------+ +------+ \-> +--------+
| Funnel |-> ...
+------+ +------+ /-> +--------+
| cpu4 |->| ETM |-\ /
+------+ +------+ \-> +--------+ +-----+ /
...... | Funnel |->| ETF |-/
+------+ +------+ /-> +--------+ +-----+
| cpu7 |->| ETM |-/
+------+ +------+
The CoreSight funnel driver only supports dynamic funnel with
registration register resource, thus it cannot support for the static
funnel case and it's impossible to create trace data path for this case.
This patch is to extend CoreSight funnel driver to support both for
static funnel and dynamic funnel. For the dynamic funnel it reuses the
code existed in the driver, for static funnel the driver will support
device probe if without providing register resource and the driver skips
registers accessing when detect the register base is NULL.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Wanglai Shi <shiwanglai@hisilicon.com>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds a device id for the new static replicator compatible
string; it changes the driver name from "coresight-replicator" to
"coresight-static-replicator" as well.
This patch also gives warning when use the replicator obsolete DT
binding.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds support for CPU-wide trace scenarios by making sure that
only the sources monitoring the same process have access to a common sink.
Because the sink is shared between sources, the first source to use the
sink switches it on while the last one does the cleanup. Any attempt to
modify the HW is overlooked for as long as more than one source is using
a sink.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds support for CPU-wide trace scenarios by making sure that
only the sources monitoring the same process have access to a common sink.
Because the sink is shared between sources, the first source to use the
sink switches it on while the last one does the cleanup. Any attempt to
modify the HW is overlooked for as long as more than one source is using
a sink.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds support for CPU-wide trace scenarios by making sure that
only the sources monitoring the same process have access to a common sink.
Because the sink is shared between sources, the first source to use the
sink switches it on while the last one does the cleanup. Any attempt to
modify the HW is overlooked for as long as more than one source is using
a sink.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch uses the PID of the process being traced to allocate and free
ETR memory buffers for CPU-wide scenarios. The implementation is tailored
to handle both N:1 and 1:1 source/sink HW topologies.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In CPU-wide scenarios with an N:1 source/sink topology, sources share
the same sink. In order to reuse the same sink for all sources an
IDR is needed to archive events that have already been accounted for.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds reference counting to struct etr_buf so that, in CPU-wide
trace scenarios, shared buffers can be disposed of when no longer used.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In preparation to support CPU-wide trace scenarios, introduce the notion
of process ID to ETR devices. That way events monitoring the same process
can use the same etr_buf, allowing multiple CPUs to use the same sink.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Buffer allocation is different when dealing with per-thread and
CPU-wide sessions. In preparation to support CPU-wide trace scenarios
simplify things by keeping allocation functions for both type separate.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Refactoring function tmc_etr_setup_perf_buf() so that it only deals
with the high level etr_perf_buffer, leaving the allocation of the
backend buffer (i.e etr_buf) to another function.
That way the backend buffer allocation function can decide if it wants
to reuse an existing buffer (CPU-wide trace scenarios) or simply create
a new one.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make struct perf_event available to sink buffer allocation functions in
order to use the pid they carry to allocate and free buffer memory along
with regimenting access to what source a sink can collect data for.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Function free_event_data() is already busy and is bound to become
worse with the addition of CPU-wide trace scenarios. As such spin
off a new function to strickly take care of the sink buffers.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no point in allocating sink memory for a trace session if
there is not a way to free it once it is no longer needed. As such make
sure the sink API function to allocate and free memory have been
implemented before moving ahead with the establishment of a trace
session.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When operating in CPU-wide trace scenarios and working with an N:1
source/sink HW topology, update() functions need to be made atomic
in order to avoid racing with start and stop operations.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When disabling a sink the reference counter ensures the operation goes
through if nobody else is using it. As such if drvdata::mode is already
set do CS_MODE_DISABLED, it is an error and should be reported as such.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When operating in CPU-wide mode with an N:1 source/sink HW topology,
multiple CPUs can access a sink concurrently. As such reference counting
needs to happen when the device's spinlock is held to avoid racing with
other operations (start(), update(), stop()), such as:
session A Session B
----- -------
enable_sink
atomic_inc(refcount) = 1
...
atomic_dec(refcount) = 0 enable_sink
if (refcount == 0) disable_sink
atomic_inc()
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In preparation to handle device reference counting inside of the sink
drivers, add a return code to the sink::disable() operation so that
proper action can be taken if a sink has not been disabled.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Configure timestamps to be emitted at regular intervals in the trace
stream to temporally correlate instructions executed on different CPUs.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Resource selector pair 0 is always implemented and reserved. As such
it should not be explicitly programmed.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Set the proper bit in the configuration register when contextID tracing
has been requested by user space. That way PE_CONTEXT elements are
generated by the tracers when a process is installed on a CPU.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add to the capabilities the ITRACE property so that ITRACE START events
are generated when the PMU is switched on by the core.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop the power only if we were successful in probing the device.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop the power handle only if we were successful. Otherwise
the AMBA bus code would do the rest.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop the power only when we have successfully probed. Otherwise
leave it to the amba probe to do the rest.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Removed extra newline left after original modification]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We drop the power before we complete the probe successfully. We
are supposed to drop it only when we are successful. Also, probing
the etb_buffer_length happens with the power turned up. So we don't
need to do that again in the helper.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With commit c2c729415b2d2132 ("coresight: platform: Cleanup coresight
connection handling"), we switched to re-using coresight_connections
for the coresight_device. However, that introduced a mismatch in the
alloc/free of the connections. The allocation is made using devm_*,
while we use kfree() to release the memory when a device is released
(even though we don't support this at the moment). Fix this by leaving
it to the automatic freeing of the memory.
Fixes: c2c729415b2d2132 ("coresight: platform: Cleanup coresight connection handling")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge the drivers for the two varieties of replicators into
a singel one. The dynamic replicator has programming base
which can be programmed to filter the trace data. The driver
detects the type based on the "base" address value of the
device, which is NULL for the static device.
Also, while at it, remove the now obsolete DYNAMIC_REPLICATOR
config entry.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename the dynamic replicator specific routines for merging with the
replicator driver. Also re-arrange the probe routine to make it easier
to merge.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As a preparatory step to merge the separate drivers for static and
dynamic replicators, annotate the static replicator specific details.
Also refactor the probe routine to make it generic in order to merge
the drivers easily.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We fail to disable the clock in case of a failure during the
probe. Clean this up. Also, we are supposed to drop the pm reference
only when the probing is successful.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If we failed to setup the DMA mask for TMC-ETR, report the
error before failing the probe.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix sparse warnings:
drivers/hwtracing/coresight/coresight-catu.c:488:35: warning:
symbol 'catu_helper_ops' was not declared. Should it be static?
drivers/hwtracing/coresight/coresight-catu.c:493:28: warning:
symbol 'catu_ops' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Clang points out a syntax error, as the etr_catu_buf_ops structure is
declared 'static' before the type is known:
In file included from drivers/hwtracing/coresight/coresight-tmc-etr.c:12:
drivers/hwtracing/coresight/coresight-catu.h:116:40: warning: tentative definition of variable with internal linkage has incomplete non-array type 'const struct etr_buf_operations' [-Wtentative-definition-incomplete-type]
static const struct etr_buf_operations etr_catu_buf_ops;
^
drivers/hwtracing/coresight/coresight-catu.h:116:21: note: forward declaration of 'struct etr_buf_operations'
static const struct etr_buf_operations etr_catu_buf_ops;
This seems worth fixing in the code, so replace pointer to the empty
constant structure with a NULL pointer. We need an extra NULL pointer
check here, but the result should be better object code otherwise,
avoiding the silly empty structure.
Fixes: 434d611cddef ("coresight: catu: Plug in CATU as a backend for ETR buffer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Fixed line over 80 characters]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull ARM updates from Russell King:
- An improvement from Ard Biesheuvel, who noted that the identity map
setup was taking a long time due to flush_cache_louis().
- Update a comment about dma_ops from Wolfram Sang.
- Remove use of "-p" with ld, where this flag has been a no-op since
2004.
- Remove the printing of the virtual memory layout, which is no longer
useful since we hide pointers.
- Correct SCU help text.
- Remove legacy TWD registration method.
- Add pgprot_device() implementation for mapping PCI sysfs resource
files.
- Initialise PFN limits earlier for kmemleak.
- Fix argument count to match macro definition (affects clang builds)
- Use unified assembler language almost everywhere for clang, and other
clang improvements (from Stefan Agner, Nathan Chancellor).
- Support security extension for noMMU and other noMMU cleanups (from
Vladimir Murzin).
- Remove unnecessary SMP bringup code (which was incorrectly copy'n'
pasted from the ARM platform implementations) and remove it from the
arch code to discourge further copys of it appearing.
- Add Cortex A9 erratum preventing kexec working on some SoCs.
- AMBA bus identification updates from Mike Leach.
- More use of raw spinlocks to avoid -RT kernel issues (from Yang Shi
and Sebastian Andrzej Siewior).
- MCPM hyp/svc mode mismatch fixes from Marek Szyprowski.
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits)
ARM: 8849/1: NOMMU: Fix encodings for PMSAv8's PRBAR4/PRLAR4
ARM: 8848/1: virt: Align GIC version check with arm64 counterpart
ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used
ARM: 8845/1: use unified assembler in c files
ARM: 8844/1: use unified assembler in assembly files
ARM: 8843/1: use unified assembler in headers
ARM: 8841/1: use unified assembler in macros
ARM: 8840/1: use a raw_spinlock_t in unwind
ARM: 8839/1: kprobe: make patch_lock a raw_spinlock_t
ARM: 8837/1: coresight: etmv4: Update ID register table to add UCI support
ARM: 8836/1: drivers: amba: Update component matching to use the CoreSight UCI values.
ARM: 8838/1: drivers: amba: Updates to component identification for driver matching.
ARM: 8833/1: Ensure that NEON code always compiles with Clang
ARM: avoid Cortex-A9 livelock on tight dmb loops
ARM: smp: remove arch-provided "pen_release"
ARM: actions: remove boot_lock and pen_release
ARM: oxnas: remove CPU hotplug implementation
ARM: qcom: remove unnecessary boot_lock
ARM: 8832/1: NOMMU: Limit visibility for CONFIG_FLASH_{MEM_BASE,SIZE}
ARM: 8831/1: NOMMU: pmsa-v8: remove unneeded semicolon
...
|