| Age | Commit message (Collapse) | Author |
|---|
|
commit 3986457110a054466bf02f9c4a85aa2bba96177b upstream.
Commit 5cca30ebe089be23 ("drm/rcar-du: Add LVDS_LANES quirk") states
that LVDS lanes 1 and 3 are inverted on R-Car H2 ES1 only, and that the
problem has been fixed in newer revisions.
However, the code didn't take into account the actual hardware revision,
thus applying the quirk also on newer hardware revisions, causing green
color reversals.
Fix this by applying the quirk when running on R-Car H2 ES1.x only.
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fixes: 5cca30ebe089be23 ("drm/rcar-du: Add LVDS_LANES quirk")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
On the D3 SoC the LVDS PHY must be enabled in the same register write
that enables the LVDS output. Skip writing the LVEN bit independently
on that platform, it will be set by the write that sets LVRES.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
|
|
The D3 and E3 SoCs have different pixel clock frequency limits for the
LVDS encoder than the other SoCs in the Gen3 family. Adjust the mode
fixup implementation accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
|
|
The rcar_du_crtc functions have a heavy reliance on the rcar_du_group
structure, in many cases just to access the DU device context.
To better separate the groups out of the CRTC handling code, give the
rcar_du_crtc its own pointer to the device and remove the indirection
through the group pointers.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The PLL parameters are computed by looping over the range of acceptable
M, N and E values, and selecting the combination that produces the
output frequency closest to the target. The internal frequency
constraints are taken into account by restricting the tested values for
the PLL parameters, reducing the search space. The target frequency,
however, is only taken into account when computing the post-PLL divider,
which can result in a 0 value for the divider when the PLL output
frequency being tested is lower than half of the target frequency.
Subsequent loops will produce a better set of PLL parameters, but for
some of the iterations this can result in a division by 0.
Fix it by clamping the divider value. We could instead restrict the E
values being tested in the inner loop, but that would require additional
calculation that would likely be less efficient as the E parameter can
only take three different values.
Fixes: c25c01361199 ("drm: rcar-du: lvds: D3/E3 support")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
The CRTC suspend and resume functions have been replaced, but the
prototypes were not removed.
Remove the redundant definitions.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The rcar_du_crtc_mode_valid() and rcar_du_crtc_get_crc_sources()
functions are accessed only through a function pointer table.
Convert the function definitions to be static to the module.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The R-Car DU driver assumes that a bridge is always connected to the DU
output. This is valid for the LVDS and HDMI outputs, but the DPAD
outputs can be connected directly to a panel, in which case no bridge is
available.
To support this use case, detect whether the entities connected to the
DU DPAD outputs are encoders or panels based on the number of ports of
their DT node, and retrieve the corresponding type of DRM objects. For
panels, additionally create panel bridge instances.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kevin Key <kevin.key@gentex.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
|
|
Implement writeback support for R-Car Gen3 by exposing writeback
connectors. Behind the scene the calls are forwarded to the VSP
backend.
Using writeback connectors will allow implemented writeback support for
R-Car Gen2 with a consistent API if desired.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
The rcar_du_vsp_plane_prepare_fb() and rcar_du_vsp_plane_cleanup_fb()
functions implement the DRM plane .prepare_fb() and .cleanup_fb()
operations. They map and unmap the framebuffer to/from the VSP
internally, which will be useful to implement writeback support. Split
the mapping and unmapping out to separate functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
The mapping between DRM and V4L2 fourcc's is stored in two separate
tables in rcar_du_vsp.c. In order to make it reusable to implement
writeback support, move it to the rcar_du_format_info structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
The rcar_du_crtc structure index field contains the CRTC hardware index,
not the hardware and software index. Update the documentation
accordingly.
Fixes: 5361cc7f8e91 ("drm: rcar-du: Split CRTC handling to support hardware indexing")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
The VSP1 driver will need to pass extra flags to the DU through the
frame completion API. Replace the completed bool flag by a bitmask to
support this.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
We need to backmerge drm-next to fix the komeda build failure.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
On the D3 and E3 SoCs the LVDS PLL clock output provides the dot clock
to the DU channels, even when the LVDS outputs are not in use. Enable
and disable the LVDS clock output when enabling or disabling a CRTC
connected to the DPAD0 output.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
On the D3 and E3 platforms, the LVDS internal PLL supplies the pixel
clock to the DU. This works automatically for LVDS outputs as the LVDS
encoder is enabled through the bridge API, enabling the internal PLL and
clock output. However, when using the DU DPAD output with the LVDS
outputs turned off, the LVDS PLL needs to be controlled manually. Add an
API to do so, to be called by the DU driver.
The drivers/gpu/drm/rcar-du/ directory has to be treated as obj-y
unconditionally, as the LVDS driver could be built-in while the DU
driver is compiled as a module.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
On the D3 and E3 SoCs the LVDS encoder has an extended internal PLL and
supplies a clock to the DU. That clock is used not only for the LVDS
outputs but also for the DPAD output. The LVDS encoder thus needs to be
available to the DU even when its output is disabled. Don't fail probe
in that case on D3 and E3.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Before the driver fully moved to drm_bridge and drm_panel, it was
necessary to parse DT and locate encoder and connector nodes. The
connector node is now unused and can be removed as a parameter to
rcar_du_encoder_init(). As a consequence rcar_du_encoders_init_one() can
be greatly simplified, removing most of the DT parsing.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The LVDS encoders on RZ/G1N SoC is similar to RZ/G1M. Add support for
RZ/G1N (R8A7744) SoC to the LVDS encoder driver.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Add an of_node_put when the result of of_graph_get_remote_port_parent is
not available.
Add a second of_node_put if no encoder is selected (encoder remains NULL).
The semantic match that finds the first problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@r exists@
local idexpression e;
expression x;
@@
e = of_graph_get_remote_port_parent(...);
... when != x = e
when != true e == NULL
when != of_node_put(e)
when != of_fwnode_handle(e)
(
return e;
|
*return ...;
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The use of drmP.h is discouraged and removal of it from
drm_modeset_helper.h caused rcar-du to fail to build.
This patch introduce the necessary fixes to prepare for the
drmP.h removal from drm_modeset_helper.h.
Build tested on arm allmodconfig/allyesconfig.
v2:
- new patch. Changes like drm_probe_helper and other
required several updates
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190126122527.11647-4-sam@ravnborg.org
|
|
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
|
|
The use of drmP.h is discouraged and removal of it from
drm_modeset_helper.h caused rcar-du to fail to build.
This patch introduce the necessary fixes to prepare for the
drmP.h removal from drm_modeset_helper.h.
Build tested on arm x86 and arm allmodconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190119084014.5355-6-sam@ravnborg.org
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
- New fourcc identifier for ARM Framebuffer Compression v1.3
Cross-subsystem Changes:
Core Changes:
- Reorganisation of drm_device and drm_framebuffer headers
- Cleanup of the drmP inclusion
- Fix leaks in the fb-helpers
- Allow for depth different from bpp in fb-helper fbdev emulation
- Remove drm_mode_object from drm_display_mode
Driver Changes:
- Add reflection properties to rockchip
- a bunch of fixes for virtio
- a bunch of fixes for dp_mst and drivers using it, and introduction of a
new refcounting scheme
- Convertion of bochs to atomic and generic fbdev emulation
- Allow meson to remove the firmware framebuffers
[airlied: patch rcar-du to add drm_modes.h]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190116200428.u2n4jbk4mzza7n6e@flea
|
|
The DRM kernel API used to be defined in a handful of headers, pulled in
through drmP.h. It has since been split in multiple headers for the
different DRM components, and drmP.h turned into a legacy header that
just pulls in most of the DRM kernel API (and a large number of other
miscellaneous kernel headers).
In order to speed up compilation, replace inclusion of drmP.h with only
the required headers. It turns out that the rcar-du-drm driver already
includes most of the necessary headers, so the change is simple.
While at it, remove unneeded inclusion of other headers, and unneeded
forward declarations of structures.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
DU channels are routed to DPAD outputs in an SoC-dependent way. The
routing can be fixed (e.g. DU3 to DPAD0 on H3) or configurable (e.g. DU0
or DU1 to DPAD0 on D3/E3). The hardware offers no option to disconnect
DPAD outputs, which are thus always driven by a DU channel.
On SoCs that have less DU channels than DU outputs, such as D3 and E3,
the DPAD output is always driven when all channels are in use by other
outputs (such as the internal LVDS and HDMI encoders). This creates an
unwanted clone on the DPAD output.
However, the parallel output of the DU channels routed to DPAD can be
set to fixed levels in the DU channels themselves through the DOFLR
group register. Use this to turn the DPAD on or off by driving fixed
signals at the output of any DU channel not routed to a DPAD output.
This doesn't affect the DU output signals going to other outputs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
The rcar_du_crtc outputs field stores a bitmask of the outputs driven by
the CRTC. This changes based on the configuration requested by
userspace, and is used for the sole purpose of configuring the hardware.
The field thus belongs to the CRTC state. Move it to the
rcar_du_crtc_state structure.
As a result the rcar_du_crtc_route_output() function loses most of its
purpose. In order to remove it, move dpad0_source calculation to
rcar_du_atomic_commit_tail(), until the field gets moved to a state
structure. In order to simplify the rcar_du_group_set_routing()
implementation, we also store the DPAD1 source in a new dpad1_source
field which will move to a state structure with dpad0_source.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
The RCAR_DU_FEATURE_EXT_CTRL_REGS feature flag is missing for H1 only,
which is a first generation device, not a second generation device as
reported in the device information table. Fix the H1 generation and use
generation checks to replace the feature flag.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
Implement a .mode_valid() handler in the R-Car glue layer to reject
modes with an unsupported clock frequency.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
The LVDS implementation on the RZ/G2E (a.k.a. R8A774C0) is very similar
to the one found on R-Car E3 (a.k.a. R8A77990), therefore add RZ/G2E
LVDS support to the LVDS encoder driver in a similar fashion to what is
done for R-Car E3.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Add support for the RZ/G2E (R8A774C0) SoC to the R-Car DU driver.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Using overlay sugar syntax makes the DTS files easier to read (and
write).
Overlay syntactic sugar for generating target-path fragments is
supported by the version of dtc supplied with the kernel since commit
50aafd60898a8b3e ("scripts/dtc: Update to upstream version
v1.4.6-21-g84e414b0b5bc").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The mode and ajusted_mode passed to the bridge .mode_set() operation
should never be modified by the bridge (and are not in any of the
existing bridge drivers). Make them const to make this clear.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
drm-next has been forwarded to 5.0-rc1, and we need it to apply the damage
helper for dirtyfb series from Noralf Trønnes.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
drmP.h is an relic from the days when there was a single header file.
To enable the removal of drmP.h from all users drop include
of drmP.h from bridge/dw_hdmi.h.
A few files relied on the file included in drmP.h - add explicit
include statements or forward declarations to these files.
Build tested with arm and x86.
v2:
- prefer forward declarations when possible (Laurent Pinchart)
- sort include files (Laurent Pinchart)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-7-sam@ravnborg.org
|
|
Pull drm updates from Dave Airlie:
"Core:
- shared fencing staging removal
- drop transactional atomic helpers and move helpers to new location
- DP/MST atomic cleanup
- Leasing cleanups and drop EXPORT_SYMBOL
- Convert drivers to atomic helpers and generic fbdev.
- removed deprecated obj_ref/unref in favour of get/put
- Improve dumb callback documentation
- MODESET_LOCK_BEGIN/END helpers
panels:
- CDTech panels, Banana Pi Panel, DLC1010GIG,
- Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA,
- Himax HX8357D, simulated RTSM AEMv8.
- GPD Win2 panel
- AUO G101EVN010
vgem:
- render node support
ttm:
- move global init out of drivers
- fix LRU handling for ghost objects
- Support for simultaneous submissions to multiple engines
scheduler:
- timeout/fault handling changes to help GPU recovery
- helpers for hw with preemption support
i915:
- Scaler/Watermark fixes
- DP MST + powerwell fixes
- PSR fixes
- Break long get/put shmemfs pages
- Icelake fixes
- Icelake DSI video mode enablement
- Engine workaround improvements
amdgpu:
- freesync support
- GPU reset enabled on CI, VI, SOC15 dGPUs
- ABM support in DC
- KFD support for vega12/polaris12
- SDMA paging queue on vega
- More amdkfd code sharing
- DCC scanout on GFX9
- DC kerneldoc
- Updated SMU firmware for GFX8 chips
- XGMI PSP + hive reset support
- GPU reset
- DC trace support
- Powerplay updates for newer Polaris
- Cursor plane update fast path
- kfd dma-buf support
virtio-gpu:
- add EDID support
vmwgfx:
- pageflip with damage support
nouveau:
- Initial Turing TU104/TU106 modesetting support
msm:
- a2xx gpu support for apq8060 and imx5
- a2xx gpummu support
- mdp4 display support for apq8060
- DPU fixes and cleanups
- enhanced profiling support
- debug object naming interface
- get_iova/page pinning decoupling
tegra:
- Tegra194 host1x, VIC and display support enabled
- Audio over HDMI for Tegra186 and Tegra194
exynos:
- DMA/IOMMU refactoring
- plane alpha + blend mode support
- Color format fixes for mixer driver
rcar-du:
- R8A7744 and R8A77470 support
- R8A77965 LVDS support
imx:
- fbdev emulation fix
- multi-tiled scalling fixes
- SPDX identifiers
rockchip
- dw_hdmi support
- dw-mipi-dsi + dual dsi support
- mailbox read size fix
qxl:
- fix cursor pinning
vc4:
- YUV support (scaling + cursor)
v3d:
- enable TFU (Texture Formatting Unit)
mali-dp:
- add support for linear tiled formats
sun4i:
- Display Engine 3 support
- H6 DE3 mixer 0 support
- H6 display engine support
- dw-hdmi support
- H6 HDMI phy support
- implicit fence waiting
- BGRX8888 support
meson:
- Overlay plane support
- implicit fence waiting
- HDMI 1.4 4k modes
bridge:
- i2c fixes for sii902x"
* tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits)
drm/amd/display: Add fast path for cursor plane updates
drm/amdgpu: Enable GPU recovery by default for CI
drm/amd/display: Fix duplicating scaling/underscan connector state
drm/amd/display: Fix unintialized max_bpc state values
Revert "drm/amd/display: Set RMX_ASPECT as default"
drm/amdgpu: Fix stub function name
drm/msm/dpu: Fix clock issue after bind failure
drm/msm/dpu: Clean up dpu_media_info.h static inline functions
drm/msm/dpu: Further cleanups for static inline functions
drm/msm/dpu: Cleanup the debugfs functions
drm/msm/dpu: Remove dpu_irq and unused functions
drm/msm: Make irq_postinstall optional
drm/msm/dpu: Cleanup callers of dpu_hw_blk_init
drm/msm/dpu: Remove unused functions
drm/msm/dpu: Remove dpu_crtc_is_enabled()
drm/msm/dpu: Remove dpu_crtc_get_mixer_height
drm/msm/dpu: Remove dpu_dbg
drm/msm: dpu: Remove crtc_lock
drm/msm: dpu: Remove vblank_requested flag from dpu_crtc
drm/msm: dpu: Separate crtc assignment from vblank enable
...
|
|
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
drm_fbdev_generic_setup() handles mode_config.num_connector being zero.
In that case it retries fbdev setup on the next .output_poll_changed.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128212713.43500-4-noralf@tronnes.org
|
|
Group start/stop is controlled by the DRES and DEN bits of DSYSR0 for
the first group and DSYSR2 for the second group. On most DU instances,
this maps to the first CRTC of the group. On M3-N, however, DU2 doesn't
exist, but DSYSR2 does. There is no CRTC object there that maps to the
correct DSYSR register.
Commit 9144adc5e5a9 ("drm: rcar-du: Cache DSYSR value to ensure known
initial value") switched group start/stop from using group read/write
access to DSYSR to a CRTC-based API to cache the DSYSR value. While
doing so, it introduced a regression on M3-N by accessing DSYSR3 instead
of DSYSR2 to start/stop the second group.
To fix this, access the DSYSR register directly through group read/write
if the SoC is missing the first DU channel of the group. Keep using the
rcar_du_crtc_dsysr_clr_set() function otherwise, to retain the DSYSR
caching feature.
Fixes: 9144adc5e5a9 ("drm: rcar-du: Cache DSYSR value to ensure known initial value")
Reported-by: Hoan Nguyen An <na-hoan@jinso.co.jp>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
|
|
The hardware requires the HDSR and VDSR registers to be set to 1 or
higher. This translates to a minimum combined horizontal sync and back
porch of 20 pixels and a minimum vertical back porch of 3 lines. Reject
modes that fail those requirements.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
The rcar-du driver supports probe deferral for external clocks, but
implements it badly by checking the wrong pointer due to a bad copy and
paste. Fix it.
While at it, reject invalid clocks outright for DU channels that have a
display PLL, as the external clock is mandatory in that case. This
avoids a WARN_ON() at runtime.
Fixes: 1b30dbde8596 ("drm: rcar-du: Add support for external pixel clock")
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
The hardware supports alpha on all planes, and using it on the primary
plane can be useful. Don't restrict the alpha property to overlay
planes.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Add support for the R-Car M3-N (R8A77965) SoC to the LVDS encoder
driver. The encoder appears identical to the M3-W version, we can thus
simply point to the generic Gen3 data.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
The drm_vblank_init() takes the total number of CRTCs as an argument,
but the rcar-du driver passes a bitmask of the CRTC indices. Fix it.
Fixes: 4bf8e1962f91 ("drm: Renesas R-Car Display Unit DRM driver")
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
'rcar_du_crtc_set_crc_source()'
We return 0 unconditionally in 'rcar_du_crtc_set_crc_source()'.
However, 'ret' is set to some error codes if some function calls fail.
Return 'ret' instead to propagate the error code.
Fixes: 47a52d024e89 ("media: drm: rcar-du: Add support for CRC computation")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Add support for the R8A7744 DU (which is very similar to the R8A7743 DU);
it has 1 DPAD (RGB) output and 1 LVDS output.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Add RZ/G1C (a.k.a. r8a77470) support to the R-Car DU driver.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Fix the misspelled 'belance' in a comment.
Reported-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().
remove suspend_state field from the rcar_du_device
structure as it is no more required.
With this conversion, also drm_fbdev_cma_set_suspend_unlocked()
will left with no consumer. So this function can be removed.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918163903.GA11172@jordon-HP-15-Notebook-PC
|
|
Add support for the R-Car D3 (R8A77995) and E3 (R8A77990) SoCs to the
R-Car DU driver. The two SoCs instantiate compatible DUs, so a single
information structure is enough.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
[Add support for R8A77990]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
Geert Uytterhoeven
Laurent Pinchart
Kieran Bingham
Maxime Ripard
Biju Das
Julia Lawall
Sam Ravnborg
Daniel Vetter
Dave Airlie
Fabrizio Castro
Linus Torvalds
Noralf Trønnes
Christophe JAILLET
Thomas Zimmermann
Souptick Joarder
Ulrich Hecht