summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/omapdrm
AgeCommit message (Collapse)Author
2016-12-14mm: use vmf->address instead of of vmf->virtual_addressJan Kara
Every single user of vmf->virtual_address typed that entry to unsigned long before doing anything with it so the type of virtual_address does not really provide us any additional safety. Just use masked vmf->address which already has the appropriate type. Link: http://lkml.kernel.org/r/1479460644-25076-3-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-08drm/omap: tpd12s015: fix error handlingTomi Valkeinen
tpd12s015 driver is missing error value handling for gpio initialization, causing 0 to be returned as an error if gpiod_get_* fails. This may cause deferred probing to fail. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-12-08drm/omap: fix primary-plane's possible_crtcsTomi Valkeinen
We set the possible_crtc for all planes to "(1 << priv->num_crtcs) - 1", which is fine as the HW planes can be used fro all crtcs. However, when we're doing that, we are still incrementing 'num_crtcs', and we'll end up with bad possible_crtcs, preventing the use of the primary planes. This patch passes a possible_crtcs mask to plane init function so that we get correct possible_crtc. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-14drm/omapdrm: use DRM_FB_HELPER_DEFAULT_OPS for fb_opsStefan Christ
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Stefan Christ <contact@stefanchrist.eu> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-17-git-send-email-contact@stefanchrist.eu
2016-11-02drm/omap: panel-lgphilips-lb035q02: Add note for incorrect data drive edge ↵Peter Ujfalusi
and DE level According to the datasheet of the panel, both data, DEN and sync signals are expected to be driven on the falling edge of the DOTCLK. The DE is active low according to the documentation. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: panel-sharp-ls037v7dw01: Add note for incorrect data drive edgePeter Ujfalusi
According to the datasheet of the panel, both data, DEN and sync signals are expected to be driven on the falling edge of the DOTCLK. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: panel-tpo-td028ttec1: Add note for incorrect sync drive edgePeter Ujfalusi
According to the datasheet of the panel, both data, DEN and sync signals are expected to be driven on the falling edge of the DOTCLK. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: panel-tpo-td043mtea1: Add note for incorrect sync drive edgePeter Ujfalusi
According to the datasheet of the panel, both data, DEN and sync signals are expected to be driven on the falling edge of the DOTCLK. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: Use consistent name for struct videomodePeter Ujfalusi
Use 'vm' to refer to a struct videomode instead of 'p', 't', 'timings' or something else. The code will be easier to follow if we use consistent names. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: Replace struct omap_video_timings with videomodePeter Ujfalusi
omap_video_timings can be replaced with the generic videomode in omapdrm and the omap_video_timings can be removed. This patch will replace the omap_video_timings with videomode. With the change we no longer need the functions to convert to/from videomode and drm_display_mode to omap_video_timings, these can be removed as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: Change the types of struct omap_video_timings membersPeter Ujfalusi
omap_video_timings struct have the same members as struct videomode, but their types are different. As first step change the types of the omap_video_timings struct members to match their counterpart in struct videomode to catch any type cast related issues. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: omap_display_timings: Use display_flags for sync edgePeter Ujfalusi
In preparation to move the stack to use the generic videmode struct for display timing information use display_flags for sync edge. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: omap_display_timings: Use display_flags for pixel data edgePeter Ujfalusi
In preparation to move the stack to use the generic videmode struct for display timing information use display_flags for pixel data edge. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: omap_display_timings: Use display_flags for double_pixel modePeter Ujfalusi
In preparation to move the stack to use the generic videmode struct for display timing information use display_flags for double_pixel mode. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: omap_display_timings: Use display_flags for DE levelPeter Ujfalusi
In preparation to move the stack to use the generic videmode struct for display timing information use display_flags for DE level. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: omap_display_timings: Use display_flags for h/vsync levelPeter Ujfalusi
In preparation to move the stack to use the generic videmode struct for display timing information use display_flags for h/vsync level. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: dispc: Simplify _dispc_mgr_set_lcd_timings() parametersPeter Ujfalusi
Instead of passing the omap_video_timings structure's members individually, use the pointer to the struct. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: omap_display_timings: Use display_flags for interlace modePeter Ujfalusi
Remove the interlace member and add display_flags to omap_video_timings to configure the interlace mode. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: HDMI5: Use pointer to cfg->v_fc_config.timings in ↵Peter Ujfalusi
hdmi_core_video_config By using a pointer to the omap_mode_timings struct we can unwrap lines to make the code easier to follow. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: omap_display_timings: rename vbp to vback_porchPeter Ujfalusi
In preparation to move the stack to use the generic videmode struct for display timing information rename the vbp member to vback_porch. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: omap_display_timings: rename vfp to vfront_porchPeter Ujfalusi
In preparation to move the stack to use the generic videmode struct for display timing information rename the vfp member to vfront_porch. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: omap_display_timings: rename vsw to vsync_lenPeter Ujfalusi
In preparation to move the stack to use the generic videmode struct for display timing information rename the vsw member to vsync_len. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: omap_display_timings: rename hbp to hback_porchPeter Ujfalusi
In preparation to move the stack to use the generic videmode struct for display timing information rename the hbp member to hback_porch. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: omap_display_timings: rename hfp to hfront_porchPeter Ujfalusi
In preparation to move the stack to use the generic videmode struct for display timing information rename the hfp member to hfront_porch. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: omap_display_timings: rename hsw to hsync_lenPeter Ujfalusi
In preparation to move the stack to use the generic videmode struct for display timing information rename the hsw member to hsync_len. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: omap_display_timings: rename y_res to vactivePeter Ujfalusi
In preparation to move the stack to use the generic videmode struct for display timing information rename the y_res member to vactive. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: omap_display_timings: rename x_res to hactivePeter Ujfalusi
In preparation to move the stack to use the generic videmode struct for display timing information rename the x_res member to hactive. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: fix return value check in dsi_bind()Wei Yongjun
Fix the retrn value check which testing the wrong variable in dsi_bind(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: omap_gem: Do not try to unmap page which is not mappedPeter Ujfalusi
It might be possible that the page has been unmapped already in omap_gem_cpu_sync() so check before calling dma_unmap_page(). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omapdrm: Remove double gamma table write in omap_crtc_atomic_flush()Jyri Sarha
Remove double gamma table write in omap_crtc_atomic_flush(). Fixes commit 492a426a2fc53 ("drm/omapdrm: Implement gamma_lut atomic crtc properties") Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: remove unneeded conversions to boolAndrew F. Davis
Found with scripts/coccinelle/misc/boolconv.cocci. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: print error instead of WARN() if plane setup failsTomi Valkeinen
omap_plane_atomic_update() does WARN_ON() if dispc rejects the given plane config. Change that to dev_err() to lessen the possible spam. To fix this correctly, the plane setup needs much more work by creating a check function for dispc setup, so that we could reliably check the config in atomic_check, instead of only noticing the problem when programming dispc. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: cleanup omap_plane_atomic_check()Tomi Valkeinen
Clean up omap_plane_atomic_check() with: - Check state->fb first. If no fb, return 0. - use drm_atomic_get_existing_crtc_state() instead of drm_atomic_get_crtc_state() Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-02drm/omap: fix plane check when crtc is disabledTomi Valkeinen
I sometimes see: [drm:drm_framebuffer_remove [drm]] *ERROR* failed to reset crtc ed2a6c00 when fb was deleted: -22 which comes from drm_framebuffer_remove() when it's disabling the crtc with zeroed drm_mode_set. The problem in omap_plane_atomic_check() is that it will use those zeroed fields to verify if the setup is correct. This patch makes omap_plane_atomic_check() return 0 if the crtc is disabled. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-10-21drm/omap: Use per-plane rotation propertyVille Syrjälä
The global mode_config.rotation_property is going away, switch over to per-plane rotation_property. Not sure I got the annoying crtc rotation_property handling right. Might work, or migth not. v2: Drop the BIT() Don't create rotation property twice for each primary plane Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [danvet: Add comment per discussion between Tomi&Ville.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-8-git-send-email-ville.syrjala@linux.intel.com
2016-10-21drm/omap: Set rotation property initial value to BIT(DRM_ROTATE_0) insted of 0Ville Syrjälä
0 isn't a valid rotation property value, so let's set the initial value of the property to BIT(DRM_ROTATE_0) instead. v2: Drop the BIT() Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-7-git-send-email-ville.syrjala@linux.intel.com
2016-10-21drm: Add drm_rotation_90_or_270()Ville Syrjälä
We have intel_rotation_90_or_270() in i915 to check if the rotation is 90 or 270 degrees. Similar checks are elsewhere in drm, so let's move the helper into a central place and use it everwhere. v2: Drop the BIT() Convert all new intel_rotation_90_or_270() calls Deal with superfluous code shuffling Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-2-git-send-email-ville.syrjala@linux.intel.com
2016-10-17drm: Add reference counting to drm_atomic_stateChris Wilson
drm_atomic_state has a complicated single owner model that tracks the single reference from allocation through to destruction on another thread - or perhaps on a local error path. We can simplify this tracking by using reference counting (at a cost of a few more atomics). This is even more beneficial when the lifetime of the state becomes more convoluted than being passed to a single worker thread for the commit. v2: Double check !intel atomic_commit functions for missing gets v3: Update kerneldocs Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161014121833.439-27-chris@chris-wilson.co.uk
2016-08-29drm/atomic-helper: Add NO_DISABLE_AFTER_MODESET flag support for plane commitLiu Ying
Drivers may set the NO_DISABLE_AFTER_MODESET flag in the 'flags' parameter of the helper drm_atomic_helper_commit_planes() if the relevant display controllers(e.g., IPUv3 for imx-drm) require to disable a CRTC's planes when the CRTC is disabled. The helper would skip the ->atomic_disable call for a plane if the CRTC of the old plane state needs a modesetting operation. Of course, the drivers need to disable the planes in their CRTC disable callbacks since no one else would do that. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <linux@armlinux.org.uk> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1472461923-14364-1-git-send-email-gnuiyl@gmail.com
2016-08-19drm: Allow drivers to modify plane_state in prepare_fb/cleanup_fbChris Wilson
The drivers have to modify the atomic plane state during the prepare_fb callback so they track allocations, reservations and dependencies for this atomic operation involving this fb. In particular, how else do we set the plane->fence from the framebuffer! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160818180017.20508-1-chris@chris-wilson.co.uk
2016-08-12Revert "gpu: drm: omapdrm: dss-of: add missing of_node_put after calling ↵Peter Chen
of_parse_phandle" This reverts commit 2ab9f5879162499e1c4e48613287e3f59e593c4f Author: Peter Chen <peter.chen@nxp.com> Date: Fri Jul 15 11:17:03 2016 +0800 gpu: drm: omapdrm: dss-of: add missing of_node_put after calling of_parse_phandle The of_get_next_parent will drop refcount on the passed node, so the reverted patch is wrong, thanks for Tomi Valkeinen points it. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1470908694-16362-1-git-send-email-peter.chen@nxp.com
2016-08-12drm: Remove superflous linux/fb.h includesDaniel Vetter
Everyone who uses the fbdev emulation helpers doesn't need to include fb.h directly. Remove it. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-3-git-send-email-daniel.vetter@ffwll.ch
2016-08-08drm: BIT(DRM_ROTATE_?) -> DRM_ROTATE_?Joonas Lahtinen
Only property creation uses the rotation as an index, so convert the to figure the index when needed. v2: Use the new defines to build the _MASK defines (Sean) Cc: intel-gfx@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: malidp@foss.arm.com Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Sean Paul <seanpaul@chromium.org> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1469771405-17653-1-git-send-email-joonas.lahtinen@linux.intel.com
2016-08-01Merge tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Merge drm updates from Dave Airlie: "This is the main drm pull request for 4.8. I'm down with a cold at the moment so hopefully this isn't in too bad a state, I finished pulling stuff last week mostly (nouveau fixes just went in today), so only this message should be influenced by illness. Apologies to anyone who's major feature I missed :-) Core: Lockless GEM BO freeing Non-blocking atomic work Documentation changes (rst/sphinx) Prep for new fencing changes Simple display helpers Master/auth changes Register/unregister rework Loads of trivial patches/fixes. New stuff: ARM Mali display driver (not the 3D chip) sii902x RGB->HDMI bridge Panel: Support for new panels Improved backlight support Bridge: Convert ADV7511 to bridge driver ADV7533 support TC358767 (DSI/DPI to eDP) encoder chip support i915: BXT support enabled by default GVT-g infrastructure GuC command submission and fixes BXT workarounds SKL/BKL workarounds Demidlayering device registration Thundering herd fixes Missing pci ids Atomic updates amdgpu/radeon: ATPX improvements for better dGPU power control on PX systems New power features for CZ/BR/ST Pipelined BO moves and evictions in TTM GPU scheduler improvements GPU reset improvements Overclocking on dGPUs with amdgpu Polaris powermanagement enabled nouveau: GK20A/GM20B volt and clock improvements. Initial support for GP100/GP104 GPUs, GP104 will not yet support acceleration due to NVIDIA having not released firmware for them as of yet. exynos: Exynos5433 SoC with IOMMU support. vc4: Shader validation for branching imx-drm: Atomic mode setting conversion Reworked DMFC FIFO allocation External bridge support analogix-dp: RK3399 eDP support Lots of fixes. rockchip: Lots of small fixes. msm: DT bindings cleanups Shrinker and madvise support ASoC HDMI codec support tegra: Host1x driver cleanups SOR reworking for DP support Runtime PM support omapdrm: PLL enhancements Header refactoring Gamma table support arcgpu: Simulator support virtio-gpu: Atomic modesetting fixes. rcar-du: Misc fixes. mediatek: MT8173 HDMI support sti: ASOC HDMI codec support Minor fixes fsl-dcu: Suspend/resume support Bridge support amdkfd: Minor fixes. etnaviv: Enable GPU clock gating hisilicon: Vblank and other fixes" * tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits) drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup drm/nouveau/acpi: fix lockup with PCIe runtime PM drm/nouveau/acpi: check for function 0x1B before using it drm/nouveau/acpi: return supported DSM functions drm/nouveau/acpi: ensure matching ACPI handle and supported functions drm/nouveau/fbcon: fix font width not divisible by 8 drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce drm/amdgpu: add query device id and revision id into system info entry at CGS drm/amdgpu: add new definition in bif header drm/amd/powerplay: rename smum header guards drm/amdgpu: enable UVD context buffer for older HW drm/amdgpu: fix default UVD context size drm/amdgpu: fix incorrect type of info_id drm/amdgpu: make amdgpu_cgs_call_acpi_method as static drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build drm/amdgpu: enable UVD VM only on polaris drm/amdgpu: increase timeout of IB test drm/amdgpu: add destroy session when generate VCE destroy msg. drm/amd: fix deadlock of job_list_lock V2 ...
2016-07-22GPU-DRM-OMAP: Delete unnecessary checks before two function callsMarkus Elfring
The following functions test whether their argument is NULL and then return immediately. * backlight_device_unregister * drm_gem_object_unreference_unlocked Thus the test around the calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/72ff4670-4f3d-c7ed-4f37-e49f2bbc7aba@users.sourceforge.net
2016-07-19Merge remote-tracking branch 'airlied/drm-next' into topic/drm-miscDaniel Vetter
Backmerge drm-next to be able to apply Chris' connector_unregister_all cleanup (need latest i915 and sun4i state for that). Also there's a trivial conflict in ttm_bo.c that git rerere fails to remember. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-07-18drm/omap: make fbdev support really optionalTobias Jakobi
Currently enabling OMAP DRM support automatically pulls in fbdev dependency. However this dep is unnecessary since DRM core already handles this for us (DRM_FBDEV_EMULATION). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-4-git-send-email-tjakobi@math.uni-bielefeld.de
2016-07-15gpu: drm: omapdrm: dss-of: add missing of_node_put after calling ↵Peter Chen
of_parse_phandle of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-07-15gpu: drm: omapdrm: connector-dvi: add missing of_node_put after calling ↵Peter Chen
of_parse_phandle of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-07-02Back-merge tag 'v4.7-rc5' into drm-nextDave Airlie
Linux 4.7-rc5 The fsl-dcu pull needs -rc3 so go to -rc5 for now.
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-18 05:27:01 +0000