aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_wopcm.h
AgeCommit message (Collapse)Author
2019-08-02drm/i915/wopcm: Don't fail on WOPCM partitioning failureMichal Wajdeczko
We don't have to immediately fail on WOPCM partitioning, we can wait until we will start programming WOPCM registers. This should give us more options if we decide to restore fallback in case of GuC failures. v3: rebased Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190802184055.31988-7-michal.wajdeczko@intel.com
2019-07-31drm/i915/uc: Move uC WOPCM setup in uc_init_hwDaniele Ceraolo Spurio
The register we write are not WOPCM regs but uC ones related to how GuC and HuC are going to use the WOPCM, so it makes logical sense for them to be programmed as part of uc_init_hw. The WOPCM map on the other side is not uC-specific (although that is our main use-case), so keep that separate. v2: move write_and_verify to uncore, fix log, re-use err_out tag, add intel_wopcm_guc_base, fix log Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190730230743.19542-2-daniele.ceraolospurio@intel.com
2019-06-21drm/i915: Stop using I915_READ/WRITE in intel_wopcm_init_hwTvrtko Ursulin
More legacy mmio accessor removal. We pass in intel_gt explicitly allowing code to use new intel_uncore_read/write helpers. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-17-tvrtko.ursulin@linux.intel.com
2019-06-11drm/i915/guc: Move intel_guc_reserved_gtt_size to intel_wopcm_guc_sizeTvrtko Ursulin
Reduces pointer chasing and gets more to the point. v2: * Tidy whitespace. * Tidy comment. (Michal) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190611110044.7742-1-tvrtko.ursulin@linux.intel.com
2018-03-14drm/i915/guc: Check the locking status of GuC WOPCM registersJackie Li
GuC WOPCM registers are write-once registers. Current driver code accesses these registers without checking the accessibility to these registers which will lead to unpredictable driver behaviors if these registers were touch by other components (such as faulty BIOS code). This patch moves the GuC WOPCM registers updating code into intel_wopcm.c and adds check before and after the update to GuC WOPCM registers so that we can make sure the driver is in a known state after writing to these write-once registers. v6: - Made sure module reloading won't bug the kernel while doing locking status checking v7: - Fixed patch format issues v8: - Fixed coding style issue on register lock bit macro definition (Sagar) v9: - Avoided to use redundant !! to cast uint to bool (Chris) - Return error code instead of GEM_BUG_ON for locked with invalid register values case (Sagar) - Updated guc_wopcm_hw_init to use guc_wopcm as first parameter (Michal) - Added code to set and validate the HuC_LOADING_AGENT_GUC bit in GuC WOPCM offset register based on the presence of HuC firmware (Michal) - Use bit fields instead of macros for GuC WOPCM flags (Michal) v10: - Refined variable names, removed redundant comments (Joonas) - Introduced lockable_reg to handle the write once register write and propagate the write error to caller (Joonas) - Used lockable_reg abstraction to avoid locking bit check on generic i915_reg_t (Michal) - Added log message for error paths (Michal) - Removed hw_updated flag and only relies on real hardware status v11: - Replaced lockable_reg with simplified function (Michal) - Used new macros for locking bits of WOPCM size/offset registers instead of using BIT(0) directly (Michal) - use intel_wopcm_init_hw() called from intel_gem_init_hw() to do GuC WOPCM register setup instead of calling from intel_uc_init_hw() (Michal) v12: - Updated function kernel-doc to align with code changes (Michal) - Updated code to use wopcm pointer directly (Michal) v13: - Updated the ordering of s-o-b/cc/r-b tags (Sagar) BSpec: 10875, 10833 Signed-off-by: Jackie Li <yaodong.li@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> (v11) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v12) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1520987574-19351-5-git-send-email-yaodong.li@intel.com
2018-03-14drm/i915: Implement dynamic GuC WOPCM offset and size calculationJackie Li
Hardware may have specific restrictions on GuC WOPCM offset and size. On Gen9, the value of the GuC WOPCM size register needs to be larger than the value of GuC WOPCM offset register + a Gen9 specific offset (144KB) for reserved GuC WOPCM. Fail to enforce such a restriction on GuC WOPCM size will lead to GuC firmware execution failures. On the other hand, with current static GuC WOPCM offset and size values (512KB for both offset and size), the GuC WOPCM size verification will fail on Gen9 even if it can be fixed by lowering the GuC WOPCM offset by calculating its value based on HuC firmware size (which is likely less than 200KB on Gen9), so that we can have a GuC WOPCM size value which is large enough to pass the GuC WOPCM size check. This patch updates the reserved GuC WOPCM size for RC6 context on Gen9 to 24KB to strictly align with the Gen9 GuC WOPCM layout. It also adds support to verify the GuC WOPCM size aganist the Gen9 hardware restrictions. To meet all above requirements, let's provide dynamic partitioning of the WOPCM that will be based on platform specific HuC/GuC firmware sizes. v2: - Removed intel_wopcm_init (Ville/Sagar/Joonas) - Renamed and Moved the intel_wopcm_partition into intel_guc (Sagar) - Removed unnecessary function calls (Joonas) - Init GuC WOPCM partition as soon as firmware fetching is completed v3: - Fixed indentation issues (Chris) - Removed layering violation code (Chris/Michal) - Created separat files for GuC wopcm code (Michal) - Used inline function to avoid code duplication (Michal) v4: - Preset the GuC WOPCM top during early GuC init (Chris) - Fail intel_uc_init_hw() as soon as GuC WOPCM partitioning failed v5: - Moved GuC DMA WOPCM register updating code into intel_wopcm.c - Took care of the locking status before writing to GuC DMA Write-Once registers. (Joonas) v6: - Made sure the GuC WOPCM size to be multiple of 4K (4K aligned) v8: - Updated comments and fixed naming issues (Sagar/Joonas) - Updated commit message to include more description about the hardware restriction on GuC WOPCM size (Sagar) v9: - Minor changes variable names and code comments (Sagar) - Added detailed GuC WOPCM layout drawing (Sagar/Michal) - Refined macro definitions to be reader friendly (Michal) - Removed redundent check to valid flag (Michal) - Unified first parameter for exported GuC WOPCM functions (Michal) - Refined the name and parameter list of hardware restriction checking functions (Michal) v10: - Used shorter function name for internal functions (Joonas) - Moved init-ealry function into c file (Joonas) - Consolidated and removed redundant size checks (Joonas/Michal) - Removed unnecessary unlikely() from code which is only called once during boot (Joonas) - More fixes to kernel-doc format and content (Michal) - Avoided the use of PAGE_MASK for 4K pages (Michal) - Added error log messages to error paths (Michal) v11: - Replaced intel_guc_wopcm with more generic intel_wopcm and attached intel_wopcm to drm_i915_private instead intel_guc (Michal) - dynamic calculation of GuC non-wopcm memory start (a.k.a WOPCM Top offset from GuC WOPCM base) (Michal) - Moved WOPCM marco definitions into .c source file (Michal) - Exported WOPCM layout diagram as kernel-doc (Michal) v12: - Updated naming, function kernel-doc to align with new changes (Michal) v13: - Updated the ordering of s-o-b/cc/r-b tags (Sagar) - Corrected one tense error in comment (Sagar) - Corrected typos and removed spurious comments (Joonas) Bspec: 12690 Signed-off-by: Jackie Li <yaodong.li@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> (v8) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v9) Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> (v11) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v12) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1520987574-19351-2-git-send-email-yaodong.li@intel.com