aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/drm_plane_helper.c
AgeCommit message (Collapse)Author
2019-05-27drm: drop use of drmP.h in drm/*Sam Ravnborg
The use of the drmP.h header file is deprecated. Remove use from all files in drm/* so people do not look there and follow a bad example. Build tested allyesconfig,allmodconfig on x86, arm etc. Including alpha that is as always more challenging than the rest. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20190526173535.32701-8-sam@ravnborg.org
2018-10-05drm: Unexport drm_plane_helper_check_updateDaniel Vetter
It's for legacy drivers only (atomic ones should use drm_atomic_helper_check_plane_state() instead), and there's no users left except the one in the primary plane helpers. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-18-daniel.vetter@ffwll.ch
2018-10-05drm: Unexport primary plane helpersDaniel Vetter
Well except the destroy helper, which isn't really a primary helper but generally useful, if mislabelled. v2: Keep some of the nice comments about the limitations of the primarmy plane helpers, and put them into the kerneldoc for drm_crtc_init() (Sam). Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005094732.31353-1-daniel.vetter@ffwll.ch
2018-10-05drm: Remove transitional helpersDaniel Vetter
With armada the last bigger driver that realistically needed these to convert from legacy kms to atomic is converted. These helpers have been broken more often than not the past 2 years, and as this little patch series shows, tricked a bunch of people into using the wrong helpers for their functions. Aside: I think a lot more drivers should be using the device-level drm_atomic_helper_shutdown/suspend/resume helpers and related functions. In almost all the cases they get things exactly right. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-16-daniel.vetter@ffwll.ch
2018-09-09drm: extract drm_atomic_uapi.cDaniel Vetter
This leaves all the commit/check and state handling in drm_atomic.c, while pulling all the uapi glue and the huge ioctl itself into a seprate file. This seems to almost perfectly split the rather big drm_atomic.c file into 2 equal sizes. Also adjust the kerneldoc and type a very terse overview text. v2: Rebase. v3: Fix tiny typo. v4: - Fixup armada, newly converted atomic driver hooray! - Fixup msm/dpu1, newly added too. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: intel-gfx@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-7-daniel.vetter@ffwll.ch
2018-07-03drm: add missing ctx argument to plane transitional helpersRussell King
In commits: 34a2ab5e0689 ("drm: Add acquire ctx parameter to ->update_plane") 1931529448bc ("drm: Add acquire ctx parameter to ->plane_disable") a pointer to a drm_modeset_acquire_ctx structure was added as an argument to the method prototypes. The transitional helpers are supposed to be directly plugged in as implementations of these methods, but doing so generates a warning. Add the missing argument. A number of buggy users were added for drm_plane_helper_disable() which need to be fixed up for this change, which we do by passing a NULL ctx argument. Fixes: 1931529448bc ("drm: Add acquire ctx parameter to ->plane_disable") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/E1fa1Zr-0005gT-VF@rmk-PC.armlinux.org.uk
2018-06-11drm: Stop updating plane->crtc/fb/old_fb on atomic driversVille Syrjälä
Stop playing around with plane->crtc/fb/old_fb with atomic drivers. Make life a lot simpler when we don't have to do the magic old_fb vs. fb dance around plane updates. That way we can't risk plane->fb getting out of sync with plane->state->fb and we're less likely to leak any refcounts as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-14-ville.syrjala@linux.intel.com Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-03-05drm: Don't pass clip to drm_atomic_helper_check_plane_state()Ville Syrjälä
Move the plane clip rectangle handling into drm_atomic_helper_check_plane_state(). Drivers no longer have to worry about such mundane details. v2: Convert armada, rcar, and sun4i as well v3: Resolve simple_kms_helper conflict Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: Russell King <rmk+kernel@armlinux.org.uk> Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> #msm Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-5-ville.syrjala@linux.intel.com Acked-by: Liviu Dudau <liviu.dudau@arm.com> #hdlcd,malidp Acked-by: Philipp Zabel <p.zabel@pengutronix.de> #imx,mtk Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> #vmwgfx Acked-by: Neil Armstrong <narmstrong@baylibre.com> #meson Acked-by: Shawn Guo <shawnguo@kernel.org> #zte
2017-11-20drm: Move drm_plane_helper_check_state() into drm_atomic_helper.cVille Syrjälä
drm_plane_helper_check_update() isn't a transitional helper, so let's rename it to drm_atomic_helper_check_plane_state() and move it into drm_atomic_helper.c. v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc Cc: Daniel Vetter <daniel@ffwll.ch> Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171101201619.6175-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-11-20drm: Check crtc_state->enable rather than crtc->enabled in ↵Ville Syrjälä
drm_plane_helper_check_state() drm_plane_helper_check_state() is supposed to do things the atomic way, so it should not be inspecting crtc->enabled. Rather we should be looking at crtc_state->enable. We have a slight complication due to drm_plane_helper_check_update() reusing drm_plane_helper_check_state() for non-atomic drivers. Thus we'll have to pass the crtc_state in manally and construct a fake crtc_state in drm_plane_helper_check_update(). v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171101201558.6059-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-10-13drm: Replace kzalloc with kcallocHarsha Sharma
Prefer kcalloc over kzalloc to allocate an array. This patch fixes checkcpatch issue. Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171013073747.29877-1-harshasharmaiitr@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20171013073747.29877-1-harshasharmaiitr@gmail.com
2017-05-22drm: Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ to UAPIRobert Foss
Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI as a convenience. Ideally the DRM_ROTATE_ and DRM_REFLECT_ property ids are looked up through the atomic API, but realizing that userspace is likely to take shortcuts and assume that the enum values are what is sent over the wire. As a result these defines are provided purely as a convenience to userspace applications. Changes since v3: - Switched away from past tense in comments - Add define name change to previously mis-spelled DRM_REFLECT_X comment - Improved the comment for the DRM_MODE_REFLECT_<axis> comment Changes since v2: - Changed define prefix from DRM_MODE_PROP_ to DRM_MODE_ - Fix compilation errors - Changed comment formatting - Deduplicated comment lines - Clarified DRM_MODE_PROP_REFLECT_ comment Changes since v1: - Moved defines from drm.h to drm_mode.h - Changed define prefix from DRM_ to DRM_MODE_PROP_ - Updated uses of the defines to the new prefix - Removed include from drm_rect.c - Stopped using the BIT() macro Signed-off-by: Robert Foss <robert.foss@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170519205017.23307-2-robert.foss@collabora.com
2017-05-08drm: Remove redundant NULL check during atomic plane commitImre Deak
plane_state can't be NULL anywhere in this function, so the NULL check at the end is redundant, remove it. Cc: dri-devel@lists.freedesktop.org Signed-off-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1493214013-15580-9-git-send-email-imre.deak@intel.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-04-13drm/doc: Fix missing @ctx documentationDaniel Vetter
Forgot to add this :( Fixes: 1931529448bc ("drm: Add acquire ctx parameter to ->plane_disable") Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170413074007.7620-1-daniel.vetter@ffwll.ch
2017-03-29drm: Add acquire ctx parameter to ->set_configDaniel Vetter
Surprisingly a lot of legacy drivers roll their own, for runtime pm and because vmwgfx. Also make nouveau's set_config static while at it. Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-19-daniel.vetter@ffwll.ch
2017-03-29drm: Add acquire ctx parameter to ->plane_disableDaniel Vetter
Nouveau had a few direct calls to ->disable_plane, I replaced those with drm_plane_force_disable. Same story for shmob. Otherwise no code changes. Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-5-daniel.vetter@ffwll.ch
2017-03-29drm: Add acquire ctx parameter to ->update_planeDaniel Vetter
Just rolling it out, no code change here. Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Rob Clark <robdclark@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Eric Anholt <eric@anholt.net> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-3-daniel.vetter@ffwll.ch
2017-03-06drm/atomic: Make drm_atomic_plane_disabling easier to understand.Maarten Lankhorst
This function becomes a lot simpler when having passed both the old and new state to it. Looking at all callers, it seems that old_plane_state is never NULL so the check can be dropped. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487256430-7625-3-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-02-28drm: Rename connector list iterator APIThierry Reding
Currently the functions that initialize and tear down a connector iterator use the _get() and _put() suffixes. However, these suffixes are typically used by reference counting functions. Make these function names a little more consistent by changing the suffixes to _begin() and _end(), which is a fairly common pattern in the rest of the Linux kernel. Suggested-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170228144643.5668-8-thierry.reding@gmail.com
2017-02-26drm: Always prepare null framebuffer in transitional helperGabriel Krisman Bertazi
Despite the documentation claim that cleanup_fb will match prior calls to prepare_fb, in case of NULL framebuffers in the transitional helpers, the code will skip the call to prepare_fb but not the corresponding cleanup_fb call. This asymmetry in semantics is unnecessarily surprising for developers transitioning drivers to atomic model, specially because the final atomic handlers don't have the issue - the prepare_fb is always called, despite the new state framebuffer being null. The only current user of the transitional helper that doesn't take care of null framebuffers explicitly inside the prepare_fb hook is atmel_hlcdc, so we take special care to make sure we don't break anything there. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170216164442.28704-1-krisman@collabora.co.uk
2017-01-25drm/kms-helpers: Use recommened kerneldoc for struct member refsDaniel Vetter
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... v2: Comments from Gustavo. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Rewiewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-2-daniel.vetter@ffwll.ch
2016-12-30drm/doc: use preferred struct reference in kernel-docDaniel Vetter
sed -e 's/\( \* .*\)struct &\([_a-z]*\)/\1\&struct \2/' -i Originally I wasnt a friend of this style because I thought a line-break between the "&struct" and "foo" part would break it. But a quick test shows that " * &struct \n * foo\n" works pefectly well with current kernel-doc. So time to mass-apply these changes! Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-6-git-send-email-daniel.vetter@ffwll.ch
2016-12-18drm: Convert all helpers to drm_connector_list_iterDaniel Vetter
Mostly nothing special (except making sure that really all error paths and friends call iter_put). v2: Don't forget the raw connector_list walking in drm_helper_move_panel_connectors_to_head. That one unfortunately can't be converted to the iterator helpers, but since it's just some list splicing best to just wrap the entire thing up in one critical section. v3: Bail out after iter_put (Harry). Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161215155843.13408-1-daniel.vetter@ffwll.ch
2016-12-18drm: Don't include <drm/drm_encoder.h> in <drm/drm_crtc.h>Laurent Pinchart
<drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has now been split into separate files for each object type, but still includes most other KMS headers to avoid breaking driver compilation. As a step towards fixing that problem, remove the inclusion of <drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where appropriate. Also remove the forward declarations of the drm_encoder and drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not needed in the header. <drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a forward declaration of struct drm_encoder in order to allow including it as the first header in a compilation unit. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sinclair Yeh <syeh@vmware.com> # For vmwgfx Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com
2016-11-08drm: add helpers to go from plane state to drm_rectRob Clark
Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> [seanpaul resolved conflict in drm_plane.h] Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-08-16drm: Fix kerneldoc in drm_plane_helper.cDaniel Vetter
Ville ocd'ed the parameter name, but forgot to update the docs! Fixes: df86af9133b4 ("drm/plane-helper: Add drm_plane_helper_check_state()") Cc: Sean Paul <seanpaul@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-21-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm/kms-helpers: Extract drm_modeset_helper.[hc]Daniel Vetter
While reviewing docs I spotted that we have a few functions that really just don't fit into their containing helper library section. Extract them and shovel them all into a new library for random one-off aux stuff. v2: Remove wrongly added files for real. Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-3-git-send-email-daniel.vetter@ffwll.ch
2016-08-08drm/plane-helper: Add drm_plane_helper_check_state()Ville Syrjälä
Add a version of drm_plane_helper_check_update() which takes a plane state instead of having the caller pass in everything. And to reduce code duplication, let's reimplement drm_plane_helper_check_update() in terms of the new function, by having a tempororary plane state on the stack. v2: Add a note that the functions modifies the state (Chris) v3: Fix drm_plane_helper_check_update() y coordinates (Daniel Kurtz) Cc: Daniel Kurtz <djkurtz@chromium.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> (v2) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1470642910-14073-1-git-send-email-ville.syrjala@linux.intel.com
2016-08-08drm: BIT(DRM_ROTATE_?) -> DRM_ROTATE_?Joonas Lahtinen
Only property creation uses the rotation as an index, so convert the to figure the index when needed. v2: Use the new defines to build the _MASK defines (Sean) Cc: intel-gfx@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: malidp@foss.arm.com Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Sean Paul <seanpaul@chromium.org> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1469771405-17653-1-git-send-email-joonas.lahtinen@linux.intel.com
2016-06-17drm: Deal with rotation in drm_plane_helper_check_update()Ville Syrjälä
drm_plane_helper_check_update() needs to account for the plane rotation for correct clipping/scaling calculations. Do so. There was an earlier attempt [1] to add this into intel_check_primary_plane() but I requested that it'd be put into the helper instead. An updated patch never materialized AFAICS, so I went ahead and cooked one up myself. v2: Deal with new drm_plane_helper_check_update() callers [1] https://patchwork.freedesktop.org/patch/65177/ Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1466172790-10025-1-git-send-email-ville.syrjala@linux.intel.com
2016-06-02drm/doc: Appease sphinxDaniel Vetter
Mostly this is unexpected indents. But really it's just a demonstration for my patch, all these issues have been found&fixed using the correct source file and line number support I just added. All line numbers have been perfectly accurate. One issue looked a bit fishy in intel_lrc.c, where I don't quite grok what sphinx is unhappy about. But since that file looks like it has never seen a proper kernel-doc parser I figured better to fix in a separate path. v2: Use fancy new &drm_device->struct_mutex linking (Jani). Cc: Jani Nikula <jani.nikula@intel.com> Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-12-11drm: Pass 'name' to drm_universal_plane_init()Ville Syrjälä
Done with coccinelle for the most part. It choked on msm/mdp/mdp5/mdp5_plane.c like so: "BAD:!!!!! enum drm_plane_type type;" No idea how to deal with that, so I just fixed that up by hand. Also it thinks '...' is part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder in its place and got rid of it with sed afterwards. I didn't convert drm_plane_init() since passing the varargs through would mean either cpp macros or va_list, and I figured we don't care about these legacy functions enough to warrant the extra pain. @@ typedef uint32_t; identifier dev, plane, possible_crtcs, funcs, formats, format_count, type; @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, unsigned long possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, enum drm_plane_type type + ,const char *name, int DOTDOTDOT ) { ... } @@ identifier dev, plane, possible_crtcs, funcs, formats, format_count, type; @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, unsigned long possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, enum drm_plane_type type + ,const char *name, int DOTDOTDOT ); @@ expression E1, E2, E3, E4, E5, E6, E7; @@ drm_universal_plane_init(E1, E2, E3, E4, E5, E6, E7 + ,NULL ) v2: Split crtc and plane changes apart Pass NUL for no-name instead of "" Leave drm_plane_init() alone v3: Add ', or NULL...' to @name kernel doc (Jani) Annotate the function with __printf() attribute (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449670795-2853-1-git-send-email-ville.syrjala@linux.intel.com
2015-12-11drm: Pass 'name' to drm_crtc_init_with_planes()Ville Syrjälä
Done with coccinelle for the most part. However, it thinks '...' is part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder in its place and got rid of it with sed afterwards. I didn't convert drm_crtc_init() since passing the varargs through would mean either cpp macros or va_list, and I figured we don't care about these legacy functions enough to warrant the extra pain. @@ identifier dev, crtc, primary, cursor, funcs; @@ int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, struct drm_plane *primary, struct drm_plane *cursor, const struct drm_crtc_funcs *funcs + ,const char *name, int DOTDOTDOT ) { ... } @@ identifier dev, crtc, primary, cursor, funcs; @@ int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, struct drm_plane *primary, struct drm_plane *cursor, const struct drm_crtc_funcs *funcs + ,const char *name, int DOTDOTDOT ); @@ expression E1, E2, E3, E4, E5; @@ drm_crtc_init_with_planes(E1, E2, E3, E4, E5 + ,NULL ) v2: Split crtc and plane changes apart Pass NULL for no-name instead of "" Leave drm_crtc_init() alone v3: Add ', or NULL...' to @name kernel doc (Jani) Annotate the function with __printf() attribute (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449670771-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-12-08drm: Reorganize helper vtables and their docsDaniel Vetter
Currently we have 4 helper libraries (probe, crtc, plane & atomic) that all use the same helper vtables. And that's by necessity since we don't want to litter the core structs with one ops pointer per helper library. Also often the reuse the same hooks (like atomic does, to facilite conversion from existing drivers using crtc and plane helpers). Given all that it doesn't make sense to put the docs for these next to specific helpers. Instead extract them into a new header file and section in the docbook, and add references to them everywhere. Unfortunately kernel-doc complains when an include directive doesn't find anything (and it does by dumping crap into the output file). We have to remove the now empty includes to avoid that, instead of leaving them in for future proofing. v2: More OCD in ordering functions. v3: Spelling plus collate copyright headers properly. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449218769-16577-4-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Thierry Reding <treding@nvidia.com>
2015-11-24drm: Print the src/dst/clip rectangles in error in drm_plane_helperVille Syrjälä
To aid in debugging failures, print the src,dst,clip rectangles when drm_plane_helper_check_update() fails. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08drm/atomic: Make prepare_fb/cleanup_fb only take state, v3.Maarten Lankhorst
This removes the need to separately track fb changes i915. That will be done as a separate commit, however. Changes since v1: - Add dri-devel to cc. - Fix a check in intel's prepare and cleanup fb to take rotation into account. Changes since v2: - Split out i915 changes to a separate commit. Cc: dri-devel@lists.freedesktop.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Stone <daniels@collabora.com> [danvet: Squash in msm fixup from Maarten.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-27drm/atomic: pass old crtc state to atomic_begin/flush.Maarten Lankhorst
In intel it's useful to keep track of some state changes with old crtc state vs new state, for example to disable initial planes or when a modeset's prevented during fastboot. Cc: dri-devel@lists.freedesktop.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> [danvet: squash in fixup for exynos provided by Maarten.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-24Merge tag 'topic/connector-locking-2015-07-23' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next connector hotplug locking cleanup and fixes to make it save against atomic. Note that because of depencies this is based on top of the drm-intel-next pull, so that one needs to go in before this one. I've also thrown in the mode_group removal on top since it's defunct, never worked really, no one seems to care and the code can be resurrected easily. * tag 'topic/connector-locking-2015-07-23' of git://anongit.freedesktop.org/drm-intel: drm: gc now dead mode_group code drm: Stop filtering according to mode_group in getresources drm: Roll out drm_for_each_{plane,crtc,encoder} drm/cma-helper: Fix locking in drm_fb_cma_debugfs_show drm: Roll out drm_for_each_connector more drm: Amend connector list locking rules drm/radeon: Take all modeset locks for DP MST hotplug drm/i915: Take all modeset locks for DP MST hotplug drm: Check locking in drm_for_each_fb drm/i915: Use drm_for_each_fb in i915_debugfs.c drm: Check locking in drm_for_each_connector drm/fbdev-helper: Grab mode_config.mutex in drm_fb_helper_single_add_all_connectors drm/probe-helper: Grab mode_config.mutex in poll_init/enable drm: Add modeset object iterators drm: Simplify drm_for_each_legacy_plane arguments
2015-07-22drm: Roll out drm_for_each_connector moreDaniel Vetter
Now that we also grab the connection_mutex and so fixed the race with atomic modeset we can use the iterator there too. The other special case is drm_connector_unplug_all which would have a locking inversion with the sysfs store/show functions if we'd grab the mode_config.mutex around the unplug. We could just grab connection_mutex instead, but that's a bit too much a dirty trick for my taste. Also it's only used by udl, which doesn't do any other kind of connector hotplugging, so should be race-free. Hence just stick with a comment for now. Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-07-03drm: reset empty state in transitional helpersDaniel Vetter
Transitional drivers might not have all the state frobbing lined up yet. But since the initial code has been merged a lot more state was added, so we really need this. Cc: Daniel Stone <daniels@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Reported-and-tested-by: John Hunter <zhaojunwang@pku.edu.cn> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-22drm/plane-helper: Adapt cursor hack to transitional helpersDaniel Vetter
In commit f02ad907cd9e7fe3a6405d2d005840912f1ed258 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 22 16:36:23 2015 +0100 drm/atomic-helpers: Recover full cursor plane behaviour we've added a hack to atomic helpers to never to vblank waits for cursor updates through the legacy apis since that's what X expects. Unfortunately we've (again) forgotten to adjust the transitional helpers. Do this now. This fixes regressions for drivers only partially converted over to atomic (like i915). Reported-by: Pekka Paalanen <ppaalanen@gmail.com> Cc: Pekka Paalanen <ppaalanen@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-04-07drm/drm: constify all struct drm_*_helper funcs pointersJani Nikula
They are not to be modified. Generated using the semantic patch: @@ @@ ( const struct drm_crtc_helper_funcs * | - struct drm_crtc_helper_funcs * + const struct drm_crtc_helper_funcs * ) @@ @@ ( const struct drm_encoder_helper_funcs * | - struct drm_encoder_helper_funcs * + const struct drm_encoder_helper_funcs * ) @@ @@ ( const struct drm_connector_helper_funcs * | - struct drm_connector_helper_funcs * + const struct drm_connector_helper_funcs * ) @@ @@ ( const struct drm_plane_helper_funcs * | - struct drm_plane_helper_funcs * + const struct drm_plane_helper_funcs * ) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-11drm/plane-helper: Fixup mismergeDaniel Vetter
I somehow manage to screw up applying Laurent's patch in eca93e28c256: "drm: Check in setcrtc if the primary plane supports the fb pixel format". It was a conflict with commit 3461b30b3e171e16498f3d7bc59ab703aec475c8 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Mar 5 10:32:44 2015 +0100 drm/plane-helper: unexport drm_primary_helper_create_plane and I just didn't check that the solution from wiggle made sense. Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: laurent.pinchart@ideasonboard.com Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: laurent.pinchart@ideasonboard.com Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-03-10drm: Check in setcrtc if the primary plane supports the fb pixel formatLaurent Pinchart
Drivers implementing the universal planes API report the list of supported pixel formats for the primary plane. Make sure the fb passed to the setcrtc ioctl is compatible. Drivers not implementing the universal planes API will have no format reported for the primary plane, skip the check in that case. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-10drm/plane-helper: unexport drm_primary_helper_create_planeDaniel Vetter
We shouldn't tempt driver writers into using this since it uses a default format list which is likely wrong. And when that's done we can simplify the code a bit, too. Noticed while reviewing a patch from Laurent. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-03-05drm: Pass in new and old plane state to prepare_fb and cleanup_fbTvrtko Ursulin
Use cases like rotation require these hooks to have some context so they know how to prepare and cleanup the frame buffer correctly. For i915 specifically, object backing pages need to be mapped differently for different rotation modes and the driver needs to know which mapping to instantiate and which to tear down when transitioning between them. v2: Made passed in states const. (Daniel Vetter) [airlied: add mdp5 and atmel fixups] Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-01-28Merge tag 'topic/atomic-core-2015-01-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next * tag 'topic/atomic-core-2015-01-27' of git://anongit.freedesktop.org/drm-intel: drm/atomic: Fix potential use of state after free drm/atomic-helper: debug output for modesets drm/atomic-helpers: Saner encoder/crtc callbacks drm/atomic-helpers: Recover full cursor plane behaviour drm/atomic-helper: add connector->dpms() implementation drm/atomic: Add drm_crtc_state->active drm: Add standardized boolean props drm/plane-helper: Fix transitional helper kerneldocs drm/plane-helper: Skip prepare_fb/cleanup_fb when newfb==oldfb Conflicts: include/drm/drm_crtc_helper.h
2015-01-27drm/plane: Add optional ->atomic_disable() callbackThierry Reding
In order to prevent drivers from having to perform the same checks over and over again, add an optional ->atomic_disable callback which the core calls under the right circumstances. v2: pass old state and detect edges to avoid calling ->atomic_disable on already disabled planes, remove redundant comment (Daniel Vetter) v3: rename helper to drm_atomic_plane_disabling() to clarify that it is checking for transitions, move helper to drm_atomic_helper.h, clarify check for !old_state and its relation to transitional helpers Here's an extract from some discussion rationalizing the behaviour (for a full version, see the reference below): > > Hm, thinking about this some more this will result in a slight difference > > in behaviour, at least when drivers just use the helper ->reset functions > > but don't disable everything: > > - With transitional helpers we assume we know nothing and call > > ->atomic_disable. > > - With atomic old_state->crtc == NULL in the same situation right after > > boot-up, but we asssume the plane is really off and _dont_ call > > ->atomic_disable. > > > > Should we instead check for (old_state && old_state->crtc) and state that > > drivers need to make sure they don't have stuff hanging around? > > I don't think we can check for old_state because otherwise this will > always return false, whereas we really want it to force-disable planes > that could be on (lacking any more accurate information). For > transitional helpers anyway. > > For the atomic helpers, old_state will never be NULL, but I'd assume > that the driver would reconstruct the current state in ->reset(). By the way, the reason for why old_state can be NULL with transitional helpers is the ordering of the steps in the atomic transition. Currently the Tegra patches do this (based on your blog post and the Exynos proto- type): 1) atomic conversion, phase 1: - implement ->atomic_{check,update,disable}() - use drm_plane_helper_{update,disable}() 2) atomic conversion, phase 2: - call drm_mode_config_reset() from ->load() - implement ->reset() That's only a partial list of what's done in these steps, but that's the only relevant pieces for why old_state is NULL. What happens is that without ->reset() implemented there won't be any initial state, hence plane->state (the old_state here) will be NULL the first time atomic state is applied. We could of course reorder the sequence such that drivers are required to hook up ->reset() before they can (or at the same as they) hook up the transitional helpers. We could add an appropriate WARN_ON to this helper to make that more obvious. However, that will not solve the problem because it only gets rid of the special case. We still don't know whether old_state->crtc == NULL is the current state or just the initial default. So no matter which way we do this, I don't see a way to get away without requiring specific semantics from drivers. They would be that: - drivers recreate the correct state in ->reset() so that old_state->crtc != NULL if the plane is really enabled or - drivers have to ensure that the real state in fact mirrors the initial default as encoded in the state (plane disabled) References: http://lists.freedesktop.org/archives/dri-devel/2015-January/075578.html Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-26drm/plane-helper: Fix transitional helper kerneldocsMatt Roper
drm_plane_helper_{update,disable} are not specific to primary planes; fix some copy/paste summaries to avoid confusion. Cc: dri-devel@lists.freedesktop.org Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-26drm/plane-helper: Skip prepare_fb/cleanup_fb when newfb==oldfbMatt Roper
When commiting a plane update where the framebuffer doesn't change, we can skip the prepare_fb/cleanup_fb steps. This also allows us to avoid an unnecessary vblank wait at the end of the operation when we're just moving a plane and not changing its image (e.g., for a cursor). At the moment, i915 is the only upstream driver using the transitional plane helpers, and thus the only driver affected by this change. Note that this replicates a corresponding change in the atomic helpers implemented in commit ab58e3384b9f9863bfd029b458ff337d381bf6d2 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Nov 24 20:42:42 2014 +0100 drm/atomic-helper: Skip vblank waits for unchanged fbs Reported-by: Jeremiah Mahler <jmmahler@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88540 Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Tested-by: Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>