aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/drm_modes.c
AgeCommit message (Collapse)Author
2019-02-15drm/modes: Prevent division by zero htotalTina Zhang
commit a2fcd5c84f7a7825e028381b10182439067aa90d upstream. This patch prevents division by zero htotal. In a follow-up mail Tina writes: > > How did you manage to get here with htotal == 0? This needs backtraces (or if > > this is just about static checkers, a mention of that). > > -Daniel > > In GVT-g, we are trying to enable a virtual display w/o setting timings for a pipe > (a.k.a htotal=0), then we met the following kernel panic: > > [ 32.832048] divide error: 0000 [#1] SMP PTI > [ 32.833614] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc4-sriov+ #33 > [ 32.834438] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.10.1-0-g8891697-dirty-20180511_165818-tinazhang-linux-1 04/01/2014 > [ 32.835901] RIP: 0010:drm_mode_hsync+0x1e/0x40 > [ 32.836004] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66 > [ 32.836004] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206 > [ 32.836004] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000 > [ 32.836004] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0 > [ 32.836004] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330 > [ 32.836004] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000 > [ 32.836004] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800 > [ 32.836004] FS: 0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000 > [ 32.836004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 32.836004] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0 > [ 32.836004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 32.836004] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > [ 32.836004] Call Trace: > [ 32.836004] intel_mode_from_pipe_config+0x72/0x90 > [ 32.836004] intel_modeset_setup_hw_state+0x569/0xf90 > [ 32.836004] intel_modeset_init+0x905/0x1db0 > [ 32.836004] i915_driver_load+0xb8c/0x1120 > [ 32.836004] i915_pci_probe+0x4d/0xb0 > [ 32.836004] local_pci_probe+0x44/0xa0 > [ 32.836004] ? pci_assign_irq+0x27/0x130 > [ 32.836004] pci_device_probe+0x102/0x1c0 > [ 32.836004] driver_probe_device+0x2b8/0x480 > [ 32.836004] __driver_attach+0x109/0x110 > [ 32.836004] ? driver_probe_device+0x480/0x480 > [ 32.836004] bus_for_each_dev+0x67/0xc0 > [ 32.836004] ? klist_add_tail+0x3b/0x70 > [ 32.836004] bus_add_driver+0x1e8/0x260 > [ 32.836004] driver_register+0x5b/0xe0 > [ 32.836004] ? mipi_dsi_bus_init+0x11/0x11 > [ 32.836004] do_one_initcall+0x4d/0x1eb > [ 32.836004] kernel_init_freeable+0x197/0x237 > [ 32.836004] ? rest_init+0xd0/0xd0 > [ 32.836004] kernel_init+0xa/0x110 > [ 32.836004] ret_from_fork+0x35/0x40 > [ 32.836004] Modules linked in: > [ 32.859183] ---[ end trace 525608b0ed0e8665 ]--- > [ 32.859722] RIP: 0010:drm_mode_hsync+0x1e/0x40 > [ 32.860287] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66 > [ 32.862680] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206 > [ 32.863309] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000 > [ 32.864182] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0 > [ 32.865206] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330 > [ 32.866359] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000 > [ 32.867213] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800 > [ 32.868075] FS: 0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000 > [ 32.868983] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 32.869659] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0 > [ 32.870599] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 32.871598] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > [ 32.872549] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b > > Since drm_mode_hsync() has the logic to check mode->htotal, I just extend it to cover the case htotal==0. Signed-off-by: Tina Zhang <tina.zhang@intel.com> Cc: Adam Jackson <ajax@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> [danvet: Add additional explanations + cc: stable.] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1548228539-3061-1-git-send-email-tina.zhang@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-13drm: drop _mode_ from remaining connector functionsDaniel Vetter
Since there's very few callers of these I've decided to do them all in one patch. With this the unecessarily long drm_mode_connector_ prefix is gone from the codebase! The only exception being struct drm_mode_connector_set_property, which is part of the uapi so can't be renamed. Again done with sed+some manual fixups for indent issues. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-8-daniel.vetter@ffwll.ch
2018-07-10drm: Add support for extracting sync signal drive edge from videomodePeter Ujfalusi
The sync in some panels needs to be driven by different edge of the pixel clock compared to data. This is reflected by the DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in videmode flags. Add similar similar definitions for bus_flags and convert the sync drive edge via drm_bus_flags_from_videomode(). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180618132242.8673-2-tomi.valkeinen@ti.com
2018-06-15drm: Print bad user modesVille Syrjälä
Print out the modeline when we reject a bad user mode. Avoids having to guess why it was rejected. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180611193403.16118-2-ville.syrjala@linux.intel.com Reviewed-by: Harry Wentland <harry.wentland@amd.com>
2018-05-11drm: Add and handle new aspect ratios in DRM layerShashank Sharma
HDMI 2.0/CEA-861-F introduces two new aspect ratios: - 64:27 - 256:135 This patch: - Adds new DRM flags for to represent these new aspect ratios. - Adds new cases to handle these aspect ratios while converting from user->kernel mode or vise versa. This patch was once reviewed and merged, and later reverted due to lack of DRM client protection, while adding aspect ratio bits in user modes. This is a re-spin of the series, with DRM client cap protection. The previous series can be found here: https://pw-emeril.freedesktop.org/series/10850/ Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> (V2) Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> (V2) Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> V3: rebase V4: rebase V5: corrected the macro name for an aspect ratio, in a switch case. V6: rebase V7: rebase V8: rebase V9: rebase V10: rebase V11: rebase V12: rebase V13: rebase V14: rebase Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-11-git-send-email-ankit.k.nautiyal@intel.com
2018-05-11drm: Add aspect ratio parsing in DRM layerShashank Sharma
Current DRM layer functions don't parse aspect ratio information while converting a user mode->kernel mode or vice versa. This causes modeset to pick mode with wrong aspect ratio, eventually causing failures in HDMI compliance test cases, due to wrong VIC. This patch adds aspect ratio information in DRM's mode conversion and mode comparision functions, to make sure kernel picks mode with right aspect ratio (as per the VIC). Background: This patch was once reviewed and merged, and later reverted due to lack of DRM cap protection. This is a re-spin of this patch, this time with DRM cap protection, to avoid aspect ratio information, when the client doesn't request for it. Review link: https://pw-emeril.freedesktop.org/patch/104068/ Background discussion: https://patchwork.kernel.org/patch/9379057/ Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Lin, Jia <lin.a.jia@intel.com> Signed-off-by: Akashdeep Sharma <akashdeep.sharma@intel.com> Reviewed-by: Jim Bride <jim.bride@linux.intel.com> (V2) Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> (V4) Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> V3: modified the aspect-ratio check in drm_mode_equal as per new flags provided by Ville. https://patchwork.freedesktop.org/patch/188043/ V4: rebase V5: rebase V6: As recommended by Ville, avoided matching of aspect-ratio in drm_fb_helper, while trying to find a common mode among connectors for the target clone mode. V7: rebase V8: rebase V9: rebase V10: rebase V11: rebase V12: rebase V13: rebase V14: rebase Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-10-git-send-email-ankit.k.nautiyal@intel.com
2018-05-11drm/modes: Introduce drm_mode_match()Ville Syrjälä
Make mode matching less confusing by allowing the caller to specify which parts of the modes should match via some flags. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-2-git-send-email-ankit.k.nautiyal@intel.com
2018-03-23drm: Fix uabi regression by allowing garbage mode->type from userspaceVille Syrjälä
Apparently xf86-video-vmware leaves the mode->type uninitialized when feeding the mode to the kernel. Thus we have no choice but to accept the garbage in. We'll just ignore any of the bits we don't want. The mode type is just a hint anyway, and more useful for the kernel->userspace direction. Reported-by: Thomas Hellstrom <thomas@shipmail.org> CC: Thomas Hellstrom <thomas@shipmail.org> Cc: Adam Jackson <ajax@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Fixes: c6ed6dad5cfb ("drm/uapi: Validate the mode flags/type") References: https://lists.freedesktop.org/archives/dri-devel/2018-March/170213.html Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180321211246.10152-1-ville.syrjala@linux.intel.com Tested-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Stone <daniels@collabora.com>
2018-03-16drm: Make drm_mode_vrefresh() a bit more accurateVille Syrjälä
Do the refresh rate calculation with a single division. This gives us slightly more accurate results, especially for interlaced since we don't just double the final truncated result. We do lose one bit compared to the old way, so with an interlaced mode the new code can only handle ~2GHz instead of the ~4GHz the old code handeled. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180313150759.27620-2-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-16drm: Nuke the useless 'ret' variable from drm_mode_convert_umode()Ville Syrjälä
No need to store the return value in a variable since we don't have to do any unwinding. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180313150759.27620-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-02-20drm/doc: Polish for drm_mode_parse_command_line_for_connectorDaniel Vetter
Quoting the module option format looks soo much nicer, and avoids sphinx spewing errors about markup issues. v2: Fix typo in commit message (Thierry). Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-4-daniel.vetter@ffwll.ch
2018-01-29drm/modes: Provide global mode_valid hookVille Syrjälä
Allow drivers to provide a device wide .mode_valid() hook in addition to the already existing crtc/encoder/bridge/connector hooks. This can be used to validate device/driver wide constraings without having to add those to the other hooks. And since we call this hook also for user modes later on in the modeset we don't have to worry about anything the hook has already rejected. I also have some further ideas for this hook. Eg. we could replace the drm_mode_set_crtcinfo(HALVE_V) call in drm_mode_convert_umode()/etc. with a driver specific variant via this hook. At least on i915 we would like to pass CRTC_STEREO_DOUBLE to that function instead, and then we could safely use the crtc_ timings in all our .mode_valid() hooks, which would allow us to reuse those hooks for validating the adjusted_mode during a modeset. v2: Fix the language fails in the kernel docs (Daniel) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-10-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-01-29drm/modes: Kill off the oddball DRM_MODE_TYPE_CRTC_C vs. ↵Ville Syrjälä
DRM_MODE_TYPE_BUILTIN handling For some reason drm_mode_set_crtcinfo() does nothing if the mode has the DRM_MODE_TYPE_BUILTIN flag set without the other bit from DRM_MODE_TYPE_CRTC_C also set. I have zero idea what that is supposed to achieve, but since we have no users for neither flag bit let's kill this nonsense off. v2: Fix typo in commit message Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-7-ville.syrjala@linux.intel.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-29drm/uapi: Validate the mode flags/typeVille Syrjälä
Currently userspace is allowed to feed in any king of garbage in the high bits of the mode flags/type, as are drivers when probing modes. Reject any mode with bogus flags/type. Hopefully this won't break any current userspace... v2: Split the type and flags checks to separates ifs (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Adam Jackson <ajax@redhat.com> Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171115154913.23827-1-ville.syrjala@linux.intel.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-29drm/modes: Move 3D stereo flag check into drm_mode_validate_basic()Ville Syrjälä
Currently we don't sanity check the 3D stereo flags for modes filled out by the kernel. Move the check from drm_mode_convert_umode() into drm_mode_validate_basic() so that we get the same check going both ways. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-2-ville.syrjala@linux.intel.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2017-07-31drm/modes: Fix drm_mode_is_420_only() commentSean Paul
Fixes the following warnings when building docs: ../drivers/gpu/drm/drm_modes.c:1623: warning: No description found for parameter 'display' ../drivers/gpu/drm/drm_modes.c:1623: warning: Excess function parameter 'connector' description in 'drm_mode_is_420_only' Signed-off-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170720174746.29100-2-seanpaul@chromium.org
2017-07-26drm: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Partially-Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> [seanpaul changed subject prefix and fixed conflict in stm/ltdc.c] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-14drm: add helper functions for YCBCR420 handlingShashank Sharma
This patch adds helper functions for YCBCR 420 handling. These functions do: - check if a given video mode is YCBCR 420 only mode. - check if a given video mode is YCBCR 420 also mode. V2: Added YCBCR functions as helpers in DRM layer, instead of keeping it in I915 layer. V3: Added handling for YCBCR-420 only modes too. V4: EXPORT_SYMBOL(drm_find_hdmi_output_type) V5: Addressed review comments from Danvet: - %s/drm_find_hdmi_output_type/drm_display_info_hdmi_output_type - %s/drm_can_support_ycbcr_output/drm_display_supports_ycbcr_output - %s/drm_can_support_this_ycbcr_output/ drm_display_supports_this_ycbcr_output - pass drm_display_info instead of drm_connector for consistency - For drm_get_highest_quality_ycbcr_supported doc, move the variable description above, and then the function description. V6: Add only YCBCR420 helpers (Ville) V7: Addressed review comments from Ville - Remove cea_vic_valid() check. - Fix indentation. - Make input parameters to helpers, const. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-9-git-send-email-shashank.sharma@intel.com [vsyrjala: Fix sparse indentation warn] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-07-14drm: add helper to validate YCBCR420 modesShashank Sharma
YCBCR420 modes are supported only on HDMI 2.0 capable sources. This patch adds: - A drm helper to validate YCBCR420-only mode on a particular connector. This function will help pruning the YCBCR420-only modes from the connector's modelist. - A bool variable (ycbcr_420_allowed) in the drm connector structure. While handling the EDID from HDMI 2.0 sinks, its important to know if the source is capable of handling YCBCR420 output, so that no YCBCR 420 modes will be listed for sources which can't handle it. A driver should set this variable if it wants to see YCBCR420 modes in the modedb. V5: Introduced the patch in series. V6: Squashed two patches (validate YCBCR420 and add YCBCR420 identifier) V7: Addressed review comments from Vile: - Move this patch before we add 420 modes from EDID. - No need for drm_valid_cea_vic() check, function back to non-static. - Update MODE_STATUS with NO_420 condition. - Introduce y420_vdb_modes variable in this patch Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-6-git-send-email-shashank.sharma@intel.com [vsyrjala: Drop the now bogus EXPORT_SYMBOL(drm_valid_cea_vic)] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-02-28drm: Rename drm_mode_object_get()Thierry Reding
Subsequent patches will introduce reference counting APIs that are more consistent with similar APIs throughout the Linux kernel. These APIs use the _get() and _put() suffixes and will collide with this existing function. Rename the function to drm_mode_object_add() which is a slightly more accurate description of what it does. Also the kerneldoc for this function gives an indication that it's badly named because it doesn't actually acquire a reference to anything. Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170228144643.5668-2-thierry.reding@gmail.com
2017-02-01drm: Clean up the 1366x768 fixup codesTakashi Iwai
This is just a cleanup, no functional change. The fixup code for 1366x768 in drm_mode_create_from_cmdline_mode() is basically a copy of the existing code in drm_edid.c. Make the latter code public so that it can be called from the former function. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20170117164329.10551-1-tiwai@suse.de Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: include drm_crtc_internal.h to make sparse happy] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-02-01Merge tag 'drm-misc-next-2017-01-30' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next Another round of -misc stuff: - Noralf debugfs cleanup cleanup (not yet everything, some more driver patches awaiting acks). - More doc work. - edid/infoframe fixes from Ville. - misc 1-patch fixes all over, as usual Noralf needs this for his tinydrm pull request. * tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits) drm/vc4: Remove vc4_debugfs_cleanup() dma/fence: Export enable-signaling tracepoint for emission by drivers drm/tilcdc: Remove tilcdc_debugfs_cleanup() drm/tegra: Remove tegra_debugfs_cleanup() drm/sti: Remove drm_debugfs_remove_files() calls drm/radeon: Remove drm_debugfs_remove_files() call drm/omap: Remove omap_debugfs_cleanup() drm/hdlcd: Remove hdlcd_debugfs_cleanup() drm/etnaviv: Remove etnaviv_debugfs_cleanup() drm/etnaviv: allow build with COMPILE_TEST drm/amd/amdgpu: Remove drm_debugfs_remove_files() call drm/prime: Clarify DMA-BUF/GEM Object lifetime drm/ttm: Make sure BOs being swapped out are cacheable drm/atomic: Remove drm_atomic_debugfs_cleanup() drm: drm_minor_register(): Clean up debugfs on failure drm: debugfs: Remove all files automatically on cleanup drm/fourcc: add vivante tiled layout format modifiers drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F drm/edid: Set AVI infoframe Q even when QS=0 drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range() ...
2017-01-26drm: Silence the compiler for drm_mode_get_hv_timings()Chris Wilson
Since moving drm_crtc_get_hv_timings() into drm_modes.c, the compiler has been able to get smarter and spots that drm_mode_copy() is trying to preserve garbage from the stack. Fixes: 196cd5d3758c ("drm: s/drm_crtc_get_hv_timings/drm_mode_get_hv_timings/") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126114409.9115-1-chris@chris-wilson.co.uk
2017-01-26drm: s/drm_crtc_get_hv_timings/drm_mode_get_hv_timings/Daniel Vetter
The function operates on modes, not CRTCs. Also move it into drm_modes.[hc]. Spotted while reviewing CRTC docs. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-15-daniel.vetter@ffwll.ch
2017-01-11drm: Fix broken VT switch with video=1366x768 optionTakashi Iwai
I noticed that the VT switch doesn't work any longer with a Dell laptop with 1366x768 eDP when the machine is connected with a DP monitor. It behaves as if VT were switched, but the graphics remain frozen. Actually the keyboard works, so I could switch back to VT7 again. I tried to track down the problem, and encountered a long story until we reach to this error: - The machine is booted with video=1366x768 option (the distro installer seems to add it as default). - Recently, drm_helper_probe_single_connector_modes() deals with cmdline modes, and it tries to create a new mode when no matching mode is found. - The drm_mode_create_from_cmdline_mode() creates a mode based on either CVT of GFT according to the given cmdline mode; in our case, it's 1366x768. - Since both CVT and GFT can't express the width 1366 due to alignment, the resultant mode becomes 1368x768, slightly larger than the given size. - Later on, the atomic commit is performed, and in drm_atomic_check_only(), the size of each plane is checked. - The size check of 1366x768 fails due to the above, and eventually the whole VT switch fails. Back in the history, we've had a manual fix-up of 1368x768 in various places via c09dedb7a50e ("drm/edid: Add a workaround for 1366x768 HD panel"), but they have been all in drm_edid.c at probing the modes from EDID. For addressing the problem above, we need a similar hack to the mode newly created from cmdline, manually adjusting the width when the expected size is 1366 while we get 1368 instead. Fixes: eaf99c749d43 ("drm: Perform cmdline mode parsing during...") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20170109145614.29454-1-tiwai@suse.de Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-11-15Revert "drm: Add aspect ratio parsing in DRM layer"Ville Syrjälä
This reverts commit 6dffd431e2296cda08e7e4f0242e02df1d1698cd. Adding new mode flags willy nilly breaks existing userspace. We need to coordinate this better, potentially with a new client cap that only exposes the aspect ratio flags when userspace is prepared for them (similar to what we do with stereo 3D modes). This also broke things so that we would always send out VIC==0 in the AVI infoframe unless the user specified an aspect ratio via the mode flags. And the automagic RGB full vs. limited range handling was similartly broken as the user mode would never match any CEA mode. Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Lin, Jia <lin.a.jia@intel.com> Cc: Akashdeep Sharma <akashdeep.sharma@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1478176304-6743-2-git-send-email-ville.syrjala@linux.intel.com
2016-11-15Revert "drm: Add and handle new aspect ratios in DRM layer"Ville Syrjälä
This reverts commit a68362fe3e84fcbedd49939aa200519aa5410135. Adding new mode flags willy nilly breaks existing userspace. We need to coordinate this better, potentially with a new client cap that only exposes the aspect ratio flags when userspace is prepared for them (similar to what we do with stereo 3D modes). Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Lin, Jia <lin.a.jia@intel.com> Cc: Akashdeep Sharma <akashdeep.sharma@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1478176304-6743-1-git-send-email-ville.syrjala@linux.intel.com
2016-11-08drm: helper macros to print composite typesRob Clark
I'll want to print things in a similar way in a later patch. This will make it easier. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-2-git-send-email-robdclark@gmail.com
2016-10-21drm: Use u64 for intermediate dotclock calculationsChris Wilson
We have reached the era where monitor bandwidths now exceed 31bits in frequency calculations, though as we stored them in kHz units we are safe from overflow in the modelines for some time. [ 48.723720] UBSAN: Undefined behaviour in ../drivers/gpu/drm/drm_modes.c:325:49 [ 48.726943] signed integer overflow: [ 48.728503] 2240 * 1000000 cannot be represented in type 'int' Reported-by: Martin Liška <marxin.liska@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98372 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161021141540.26837-1-chris@chris-wilson.co.uk
2016-10-17drm: Add and handle new aspect ratios in DRM layerShashank Sharma
HDMI 2.0/CEA-861-F introduces two new aspect ratios: - 64:27 - 256:135 This patch: - Adds new DRM flags for to represent these new aspect ratios. - Adds new cases to handle these aspect ratios while converting from user->kernel mode or vise versa. V2: Rebase V3: Align macro for DRM_MODE_PICTURE_ASPECT_256_135 (Jim Bride) V4: Added r-b from Jose. Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1476705880-15600-5-git-send-email-shashank.sharma@intel.com
2016-10-17drm: Add aspect ratio parsing in DRM layerShashank Sharma
Current DRM layer functions don't parse aspect ratio information while converting a user mode->kernel mode or vice versa. This causes modeset to pick mode with wrong aspect ratio, eventually causing failures in HDMI compliance test cases, due to wrong VIC. This patch adds aspect ratio information in DRM's mode conversion and mode comparision functions, to make sure kernel picks mode with right aspect ratio (as per the VIC). V2: Addressed review comments from Sean: - Fix spellings/typo - No need to handle aspect ratio none - Add a break, for default case too V3: Rebase V4: Added r-b from Jose Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Lin, Jia <lin.a.jia@intel.com> Signed-off-by: Akashdeep Sharma <akashdeep.sharma@intel.com> Reviewed-by: Jim Bride <jim.bride@linux.intel.com> Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1476705880-15600-3-git-send-email-shashank.sharma@intel.com
2016-08-16drm: update kerneldoc for changes introduced by commits "16fadc2568e9" and ↵Lothar Waßmann
"9671e228fb78" Describe the new parameter 'bus_flags' to of_get_drm_display_mode() in the kerneldoc comments and add kerneldoc comments to the new function drm_bus_flags_from_videomode(). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1471354477-25877-1-git-send-email-LW@KARO-electronics.de
2016-08-08drm/imx: convey the pixelclk-active and de-active flags from DT to the ↵Lothar Waßmann
ipu-di driver The 'de-active' and 'pixelclk-active' DT properties are evaluated by of_parse_display_timing() called from of_get_drm_display_mode(), but later lost in the conversion from videomode.flags to drm_display_mode.flags. Enhance of_get_drm_display_mode() to also return the bus flags in a separate variable, so that they can be passed on to the ipu-di driver. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-08drm: add a helper function to extract 'de-active' and 'pixelclk-active' from DTLothar Waßmann
add a helper function to extract information about pixel clock and DE polarity from DT for use by of_get_drm_display_mode(). While at it, convert spaces to tabs in indentation in drm_modes.h. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-06-09Merge tag 'topic/drm-misc-2016-06-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next As promised, piles of prep work all around: - drm_atomic_state rework, prep for nonblocking commit helpers - fence patches from Gustavo and Christian to prep for atomic fences and some cool work in ttm/amdgpu from Christian - drm event prep for both nonblocking commit and atomic fences - Gustavo seems on a crusade against the non-kms-native version of the vblank functions. - prep work from Boris to nuke all the silly ->best_encoder implementations we have (we really only need that for truly dynamic cases like dvi-i vs dvi-d or dp mst selecting the right transcoder on intel) - prep work from Laurent to rework the format handling functions - and few small things all over * tag 'topic/drm-misc-2016-06-07' of git://anongit.freedesktop.org/drm-intel: (47 commits) drm/dsi: Implement set tear scanline drm/fb_cma_helper: Implement fb_mmap callback drm/qxl: Remove useless drm_fb_get_bpp_depth() call drm/ast: Remove useless drm_fb_get_bpp_depth() call drm/atomic: Fix remaining places where !funcs->best_encoder is valid drm/core: Change declaration for gamma_set. Documentation: add fence-array to kernel DocBook drm/shmobile: use drm_crtc_vblank_{get,put}() drm/radeon: use drm_crtc_vblank_{get,put}() drm/qxl: use drm_crtc_vblank_{get,put}() drm/atmel: use drm_crtc_vblank_{get,put}() drm/armada: use drm_crtc_vblank_{get,put}() drm/amdgpu: use drm_crtc_vblank_{get,put}() drm/virtio: use drm_crtc_send_vblank_event() drm/udl: use drm_crtc_send_vblank_event() drm/qxl: use drm_crtc_send_vblank_event() drm/atmel: use drm_crtc_send_vblank_event() drm/armada: use drm_crtc_send_vblank_event() drm/doc: Switch to sphinx/rst fixed-width quoting drm/doc: Drop kerneldoc for static functions in drm_irq.c ...
2016-06-03drm/doc: Switch to sphinx/rst fixed-width quotingDaniel Vetter
Just fallout from switching from asciidoc to sphinx/rst. v2: Found more. Also s/\//#/ in the vgpu ascii-art - sphinx treats those as comments and switch to variable-width, which wreaks the layout. v3: Undo some of the hacks, rebasing onto latest version of Jani's series fixed it. Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-06-02drm/doc: Appease sphinxDaniel Vetter
Mostly this is unexpected indents. But really it's just a demonstration for my patch, all these issues have been found&fixed using the correct source file and line number support I just added. All line numbers have been perfectly accurate. One issue looked a bit fishy in intel_lrc.c, where I don't quite grok what sphinx is unhappy about. But since that file looks like it has never seen a proper kernel-doc parser I figured better to fix in a separate path. v2: Use fancy new &drm_device->struct_mutex linking (Jani). Cc: Jani Nikula <jani.nikula@intel.com> Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-06-01drm: add missing drm_mode_set_crtcinfo callTomi Valkeinen
When setting mode via MODE_ID property, drm_atomic_set_mode_prop_for_crtc() does not call drm_mode_set_crtcinfo() which possibly causes: "[drm:drm_calc_timestamping_constants [drm]] *ERROR* crtc 32: Can't calculate constants, dotclock = 0!" Whether the error is seen depends on the previous data in state->mode, as state->mode is not cleared when setting new mode. This patch adds drm_mode_set_crtcinfo() call to drm_mode_convert_umode(), which is called in both legacy and atomic paths. This should be fine as there's no reason to call drm_mode_convert_umode() without also setting the crtc related fields. drm_mode_set_crtcinfo() is removed from the legacy drm_mode_setcrtc() as that is no longer needed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-22drm/mode: rework drm_mode_object_put to drm_mode_object_unregister.Dave Airlie
This changes the code to handle being called multiple times without side effects. The new names seems more suitable for what it does. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-09drm: modes: add missing [drm] to message printingLABBE Corentin
The warning message in drm_mode_parse_command_line_for_connector miss the [drm] at beginning. This patch add it and take the opportunity to convert printk(KERN_WARNING to pr_warn() Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1454594633-15100-1-git-send-email-clabbe.montjoie@gmail.com
2015-12-15drm/doc: Convert to markdownDanilo Cesar Lemes de Paula
DRM Docbook is now Markdown ready. This means its doc is able to use markdown text on it. * Documentation/DocBook/drm.tmpl: Contains a table duplicated from drivers/gpu/drm/i915/i915_reg.h. This is not needed anymore * drivers/gpu/drm/drm_modeset_lock.c: had a code example that used to look pretty bad on html. Fixed by using proper code markup. * drivers/gpu/drm/drm_prime.c: Remove spaces between lines to make a proper markup list. * drivers/gpu/drm/i915/i915_reg.h: Altought pandoc supports tables, it doesn't support table cell spanning. But we can use fixed-width for those special cases. * include/drm/drm_vma_manager.h: Another code example that should be proper indented with four spaces. v2 (Daniel): Adjust name to gpu.xml due to rename. v3 (Daniel): Split out the actual enabling in the Makefile - this way we can merge the conversion, while just keeping the enabling in a drm-private tree. Signed-off-by: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk> (v1) Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephan Mueller <smueller@chronox.de> Cc: Michal Marek <mmarek@suse.cz> Cc: linux-kernel@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: intel-gfx <intel-gfx@lists.freedesktop.org> Cc: dri-devel <dri-devel@lists.freedesktop.org> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448471279-19748-2-git-send-email-daniel.vetter@ffwll.ch
2015-12-11drm: modes: Revert cc344980c767 "replace simple_strtoul by kstrtouint"LABBE Corentin
My latest commit introduce some case where a valid mode, could be rejected. simple_strtox functions stop at first non-digit character, but kstrtox not. So args like "video=HDMI-A-1:720x480-16@60" will be reject when checking 16@. Discussions about this change comes to the conclusion that the best solution is to revert my commit cc344980c76748e57c9c03100c2a14d36ab00334. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449838739-29969-1-git-send-email-clabbe.montjoie@gmail.com
2015-12-11drm: Drop drm_helper_probe_single_connector_modes_nomerge()Ville Syrjälä
Now that the mode type bit merge logic is fixed to only merge between new probed modes, hopefully we can eliminat the special case for qxl and virtio. That is make the merge the mode type bits from all matching new probed modes, just like every other driver. qxl and virtio got excluded from the merging in commit 3fbd6439e463 ("drm: copy mode type in drm_mode_connector_list_update()") commit abce1ec9b08a ("Revert "drm: copy mode type in drm_mode_connector_list_update()"") commit b87577b7c768 ("drm: try harder to avoid regression when merging mode bits") Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Adam Jackson <ajax@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Resolve conflicts with doc updates.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-11drm: Only merge mode type bits between new probed modesVille Syrjälä
Currently most drivers request that any mode appearing on both the old mode list and the new probed_modes list get their type bits ORed together if the modes are deemed to otherwise match each other. I don't know why anyone would want to merge in the mode type bits from any mode left over from a previous probe. For instance, you could never get rid of ther preferred bit if a matching non-preferred mode is returned by the new probe. So let's not merge anything from the stale old modes, and just replace them outright with matching new modes. If multiple matching modes are produced by the same probe, merging the type bits between them would seem like a sensible thing to do. For a bit of extra finesse if two modes are considered equal we can pick the actual timings from the one marked as preferrred. And if multiple preferred modes are produced by the same probe somehow, we can just favor the first one added to the probed_modes list. You may be asking yourself why we bother with the merging at all if nothing from the old list survives in practice. The only answer I have is "debug output". That is we want to print out a list of pruned modes, which is why we still want to look for duplicates with the old modes. There was a previous attempt to get rid of the mode type merging entirely, but it caused some kind of regression on Daniels's G33 machine. Apparently the sdvo transcoder on said machine started to die at around the same time and has since rotted away totally, so it may have been a red herring. So we don't have to worry about it anymore. The relevant commits are: commit 3fbd6439e463 ("drm: copy mode type in drm_mode_connector_list_update()") commit abce1ec9b08a ("Revert "drm: copy mode type in drm_mode_connector_list_update()"") It was then decided in commit b87577b7c768 ("drm: try harder to avoid regression when merging mode bits") that just qxl virtio are excluded from the merging, while everyone else does it. That is not changed, although now even qxl and virtio will be subject to the previously mentioned logic to choose which actual timings are picked for the new mode. v2: Fix typos in commit message, and clarify the details on the G33 regression from the previous attempt (Daniel) Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Adam Jackson <ajax@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449234781-22332-1-git-send-email-ville.syrjala@linux.intel.com
2015-12-11drm: Flatten drm_mode_connector_list_update() a bitVille Syrjälä
Use 'continue' to eliminate one indent level from drm_mode_connector_list_update(). And while at it, make 'found_it' bool. Cc: Adam Jackson <ajax@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449177255-9515-5-git-send-email-ville.syrjala@linux.intel.com
2015-12-11drm: Rename MODE_UNVERIFIED to MODE_STALEVille Syrjälä
MODE_UNVERIFIED actually means that the mode came from a previous probe, and if the new probe doesn't produce a matching mode it will get pruned from the list. Rename the flag to MODE_STALE to better convey the meaning. v2: Rebased due to conflicts with Daniel's doc stuff Cc: Adam Jackson <ajax@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449779948-10906-1-git-send-email-ville.syrjala@linux.intel.com
2015-12-09drm: Move drm_display_mode an related docs into kerneldocDaniel Vetter
This was in the documentation for modeset helper hooks, where it is a bit misplaced. v2: Reindent the drm_mode_status enum, inspired by Ville. v3: Suggestions from Ville and Thierry. v4: Small fixup that 0day spotted. v5: Slight change to avoid accidental headings in kerneldoc output. Cc: ville.syrjala@linux.intel.com Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449218769-16577-27-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v3) Reviewed-by: Thierry Reding <treding@nvidia.com> (v3)
2015-12-01drm/edid: Make the detailed timing CEA/HDMI mode fixup accept up to 5kHz ↵Ville Syrjälä
clock difference Rather than using drm_match_cea_mode() to see if the EDID detailed timings are supposed to represent one of the CEA/HDMI modes, add a special version of that function that takes in an explicit clock tolerance value (in kHz). When looking at the detailed timings specify the tolerance as 5kHz due to the 10kHz clock resolution limit inherent in detailed timings. drm_match_cea_mode() uses the normal KHZ2PICOS() matching of clocks, which only allows smaller errors for lower clocks (eg. for 25200 it won't allow any error) and a bigger error for higher clocks (eg. for 297000 it actually matches 296913-297000). So it doesn't really match what we want for the fixup. Using the explicit +-5kHz is much better for this use case. Not sure if we should change the normal mode matching to also use something else besides KHZ2PICOS() since it allows a different proportion of error depending on the clock. I believe VESA CVT allows a maximum deviation of .5%, so using that for normal mode matching might be a good idea? Cc: Adam Jackson <ajax@redhat.com> Tested-by: nathan.d.ciobanu@linux.intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92217 Fixes: fa3a7340eaa1 ("drm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-24drm: modes: replace simple_strtoul by kstrtouintLABBE Corentin
The simple_strtoul function is marked as obsolete. This patch replace it by kstrtouint. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-22drm/mode: Unstatic kernel-userspace mode conversionDaniel Stone
Move the drm_display_mode <-> drm_mode_modeinfo conversion functions from drm_crtc.c to drm_modes.c, and make them non-static so that others can use them. Signed-off-by: Daniel Stone <daniels@collabora.com> Tested-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-24 07:37:11 +0000