aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/drm_edid.c
AgeCommit message (Collapse)Author
2014-06-09drm/edid: Store all supported hdmi deep color modes in drm_display_infoMario Kleiner
HDMI deep color setup must know which modes are supported if it needs to degrade gracefully, as only 12 bpc / dc_36 is guaranteed, but 10 bpc / dc_30 is optional. The maximum bpc is not sufficient for this. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-04drm: Split connection_mutex out of mode_config.mutex (v3)Daniel Vetter
After the split-out of crtc locks from the big mode_config.mutex there's still two major areas it protects: - Various connector probe states, like connector->status, EDID properties, probed mode lists and similar information. - The links from connector->encoder and encoder->crtc and other modeset-relevant connector state (e.g. properties which control the panel fitter). The later is used by modeset operations. But they don't really care about the former since it's allowed to e.g. enable a disconnected VGA output or with a mode not in the probed list. Thus far this hasn't been a problem, but for the atomic modeset conversion Rob Clark needs to convert all modeset relevant locks into w/w locks. This is required because the order of acquisition is determined by how userspace supplies the atomic modeset data. This has run into troubles in the detect path since the i915 load detect code needs _both_ protections offered by the mode_config.mutex: It updates probe state and it needs to change the modeset configuration to enable the temporary load detect pipe. The big deal here is that for the probe/detect users of this lock a plain mutex fits best, but for atomic modesets we really want a w/w mutex. To fix this lets split out a new connection_mutex lock for the modeset relevant parts. For simplicity I've decided to only add one additional lock for all connector/encoder links and modeset configuration states. We have piles of different modeset objects in addition to those (like bridges or panels), so adding per-object locks would be much more effort. Also, we're guaranteed (at least for now) to do a full modeset if we need to acquire this lock. Which means that fine-grained locking is fairly irrelevant compared to the amount of time the full modeset will take. I've done a full audit, and there's just a few things that justify special focus: - Locking in drm_sysfs.c is almost completely absent. We should sprinkle mode_config.connection_mutex over this file a bit, but since it already lacks mode_config.mutex this patch wont make the situation any worse. This is material for a follow-up patch. - omap has a omap_framebuffer_flush function which walks the connector->encoder->crtc links and is called from many contexts. Some look like they don't acquire mode_config.mutex, so this is already racy. Again fixing this is material for a separate patch. - The radeon hot_plug function to retrain DP links looks at connector->dpms. Currently this happens without any locking, so is already racy. I think radeon_hotplug_work_func should gain mutex_lock/unlock calls for the mode_config.connection_mutex. - Same applies to i915's intel_dp_hot_plug. But again, this is already racy. - i915 load_detect code needs to acquire this lock. Which means the w/w dance due to Rob's work will be nicely contained to _just_ this function. I've added fixme comments everywhere where it looks suspicious but in the sysfs code. After a quick irc discussion with Dave Airlie it sounds like the lack of locking in there is due to sysfs cleanup fun at module unload. v1: original (only compile tested) v2: missing mutex_init(), etc (from Rob Clark) v3: i915 needs more care in the conversion: - Protect the edp pp logic with the connection_mutex. - Use connection_mutex in the backlight code due to get_pipe_from_connector. - Use drm_modeset_lock_all in suspend/resume paths. - Update lock checks in the overlay code. Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-06-04drm: replace drm_get_connector_name() with direct name field useJani Nikula
Generated using semantic patch: @@ expression E; @@ - drm_get_connector_name(E) + E->name [airlied: regenerated] Acked-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-02drm/edid: Add quirk for Sony PVM-2541A to get 12 bpc hdmi deep color.Mario Kleiner
The Sony PVM-2541A OLED high precision color display supports both 10 bpc and 12 bpc hdmi deep color input, but its edid does not signal any deep color support. Add a quirk to force it being treated as a 12 bpc panel. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/edid: Parse and handle HDMI deep color modes.Mario Kleiner
Check the HDMI cea block for deep color mode bits. If available, assign the highest supported bpc for a hdmi display, corresponding to the given deep color modes. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-05-27drm/edid: Use kmemdup instead of kmalloc + memcpyBenoit Taine
This issue was reported by coccicheck using the semantic patch at scripts/coccinelle/api/memdup.cocci Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-29drm/edid: Cleanup kerneldocThierry Reding
This fixes up a couple of inconsistencies with kerneldoc comments for the EDID related functions. Functions that return a value now use the "Return" section consistently. For some exported symbols the kernel-doc comments were not in the appropriate format and therefore not included in the generated documentation. Others had no kernel-doc at all. While at it, fix a couple of whitespace issues and capitalize common abbreviations (i2c -> I2C, edid -> EDID, ...). Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-29drm/edid: Drop revision argument for drm_mode_std()Thierry Reding
This argument is used to pass in the revision of the EDID, but since the EDID is passed in as well, we can just as well get the revision from the EDID structure directly. While at it, update the kerneldoc comment. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-22drm/edid: Fill PAR in AVI infoframe based on CEA mode listVandana Kannan
Populate PAR in infoframe structure. If there is a user setting for PAR, then that value is set. Else, value is taken from CEA mode list if VIC is found. Else, PAR is calculated from resolution. If none of these conditions are satisfied, PAR is NONE as per initialization. v2: Removed the part which sets PAR according to user input, based on Daniel's review comments. A separate patch will be submitted to create a property that would enable a user space app to set aspect ratio for AVI infoframe. v2: Removed the part which sets PAR according to user input, based on Daniel's review comments. v3: Removed calculation of PAR for non-CEA modes as per discussion with Ville. A separate patch will be submitted to create a property that would enable a user space app to set aspect ratio for AVI infoframe. Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jesse Barnes <jesse.barnes@intel.com> Cc: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Squash in fixup for htmldocs.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18Merge branch 'topic/core-stuff' of git://git.freedesktop.org/git/drm-intel ↵Dave Airlie
into drm-next Merge straggling core drm patches. * 'topic/core-stuff' of git://git.freedesktop.org/git/drm-intel: drm: Fix use-after-free in the shadow-attache exit code drm/fb-helper: Do the 'max_conn_count' zero check drm: Check if the allocation has succeeded before dereferencing newmode drm/fb-helper: Use drm_fb_helper_restore_fbdev_mode() in drm_fb_helper_set_par() drm/edid: request HDMI underscan by default
2014-03-17drm: Check if the allocation has succeeded before dereferencing newmodeDamien Lespiau
We allocate memory in drm_display_mode_from_vic_index() and use it without checking the pointer is valid. Fix that. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-13drm/modes: remove drm_mode_height/widthDaniel Vetter
There's a neat FIXME asking whether this is really need. I'd say really no. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-13drm/doc: Fix up kerneldoc in drm_edid.cDaniel Vetter
v2: Also do s/RETURNS/Returns/, less yelling in docs is always good. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-03drm/edid: request HDMI underscan by defaultDaniel Drake
Working with HDMI TVs is a real pain as they tend to overscan by default, meaning that the pixels around the edge of the framebuffer are not displayed. This is well explained here: http://mjg59.dreamwidth.org/8705.html There is a bit in the HDMI info frame that can request that the remote display shows the full pixel data ("underscan"). For the remote display, the HDMI spec states that this is optional - it doesn't have to listen. That means that most TVs will probably ignore this. But, maybe there are a handful of TVs for which this would help the situation. As we live in a digital world, ask the remote display not to overscan by default. Signed-off-by: Daniel Drake <drake@endlessm.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-20drm/edid: Populate picture aspect ratio for CEA modesVandana Kannan
Adding picture aspect ratio for CEA modes based on CEA-861D Table 3 or CEA-861E Table 4. This is useful for filling up the detail in AVI infoframe. v2: Ville's review comments incorporated Added picture aspect ratio as part of edid_cea_modes instead of DRM_MODE Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-20drm/edid: parse the list of additional 3D modesThomas Wood
Parse 2D_VIC_order_X and 3D_Structure_X from the list at the end of the HDMI Vendor Specific Data Block. v2: Use an offset value depending on 3D_Multi_present and add detail_present. (Ville Syrjälä) v3: Make sure the list is parsed even if 3D_Structure_ALL/MASK is not present. (Ville Syrjälä) Fix one length check and remove another. (Ville Syrjälä) Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-20drm/edid: split VIC display mode lookup into a separate functionThomas Wood
Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/edid: add quirk for BPC in Samsung NP700G7A-S01PL notebookRafał Miłecki
This bug in EDID was exposed by: commit eccea7920cfb009c2fa40e9ecdce8c36f61cab66 Author: Alex Deucher <alexander.deucher@amd.com> Date: Mon Mar 26 15:12:54 2012 -0400 drm/radeon/kms: improve bpc handling (v2) Which resulted in kind of regression in 3.5. This fixes https://bugs.freedesktop.org/show_bug.cgi?id=70934 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-05drm: fix the addition of the side-by-side (half) flag for extra 3D modesThomas Wood
Ensure the side-by-side (half) flag is added to any existing flags when adding modes from 3D_Structure_ALL. Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-05drm/edid: fix length check when adding extra 3D modesThomas Wood
Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-11drm/edid: compare actual vrefresh for all modes for quirksAlex Deucher
The vrefresh field of the mode is 0 for most modes fetched from the EDID (e.g., established timings). When dealing with monitors that have a bogus preferred mode, we may not always select the mode we want because we compare the target refresh to the mode's vrefresh which is 0 in a lot of cases. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2013-11-06drm: add drm_set_preferred_modeGerd Hoffmann
New helper function to set the preferred video mode. Can be called after drm_add_modes_noedid if you don't want the largest supported video mode be used by default. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06drm/edid: Yank a helpful comment about EST modes from xf86EdidModes.cVille Syrjälä
I got very confused when I tried to compare the EST modes with the spec. Bring over a comment from xf86EdidModes.c that actually describes some of history where these things came from. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06drm/edid: Don't skip every eighth EST III modeVille Syrjälä
Also check the est3 modes whose presence is indicated by bit 0. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06drm/edid: Fix the 1792x1344-75 EST III modeVille Syrjälä
The correct refresh rate for this mode is 75, not 85. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-16drm: add support for additional stereo 3D modesThomas Wood
Parse the 3D_Structure_ALL and 3D_MASK fields of the HDMI Vendor Specific Data Block to expose more stereo 3D modes. v2: Use (1 << 0) for consistency. (Ville Syrjälä) Skip adding any modes if 3D_MASK is indicated as being present but the length only includes 3D_Structure_ALL. (Ville Syrjälä) Check that the value of HDMI_3D_LEN is large enough to include 3D_Structure_ALL and 3D_MASK, if they are present. (Ville Syrjälä) v3: Increment offset before the length checks. (Ville Syrjälä) Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-10Merge remote-tracking branch 'airlied/drm-next' into drm-intel-nextDaniel Vetter
The conflict in intel_drv.h tripped me up a bit since a patch in dinq moves all the functions around, but another one in drm-next removes a single function. So I'ev figured backing this into a backmerge would be good. i915_dma.c is just adjacent lines changed, nothing nefarious there. Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/intel_drv.h Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Code stereo layouts as an enum rather than a bit fieldDamien Lespiau
This allows us to use fewer bits in the mode structure, leaving room for future work while allowing more stereo layouts types than we could have ever dreamt of. I also exposed the previously private DRM_MODE_FLAG_3D_MASK to set in stone that we are using 5 bits for the stereo layout enum, reserving 32 values. Even with that reservation, we gain 3 bits from the previous encoding. The code adding the mandatory stereo modes needeed to be adapted as it was relying or being able to or stereo layouts together. Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Carry over the stereo flags when adding the alternate modeDamien Lespiau
This allows to expose the alternate clock versions of the stereo modes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Make drm_match_cea_mode() return the underlying 2D VIC for 3d modesDamien Lespiau
When scanning out a stereo mode, the AVI infoframe vic field has to be the underlyng 2D VIC. Before that commit, we weren't matching the CEA mode because of the extra stereo flag and then were setting the VIC field in the AVI infoframe to 0. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Set the relevant infoframe field when scanning out a 3D modeDamien Lespiau
When scanning out a 3D mode on HDMI, we need to send an HDMI infoframe with the corresponding layout to the sink. v2: Make s3d_structure_from_display_mode() less subtle (Ville Syrjälä) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Extract add_hdmi_mode() out of do_hdmi_vsdb_modes()Damien Lespiau
So we respect a nice design of having similar functions at the same level, in this case: do_hdmi_vsdb_modes() - add_hdmi_mandatory_stereo_modes() - add_hdmi_mode() Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/edid: Expose mandatory stereo modes for HDMI sinksDamien Lespiau
For now, let's just look at the 3D_present flag of the CEA HDMI vendor block to detect if the sink supports a small list of then mandatory 3D formats. See the HDMI 1.4a 3D extraction for detail: http://www.hdmi.org/manufacturer/specification.aspx v2: Rename freq to vrefresh, make the mandatory structure a bit more compact, fix some white space issues and add a couple of const (Ville Syrjälä) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/edid: catch kmalloc failure in drm_edid_to_speaker_allocationAlex Deucher
Return -ENOMEM if the allocation fails. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-01drm/edid: add drm_edid_duplicateJani Nikula
We have some code duplication related to EDID duplication. Add a helper. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-02Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Alex writes: This is the radeon drm-next request. Big changes include: - support for dpm on CIK parts - support for ASPM on CIK parts - support for berlin GPUs - major ring handling cleanup - remove the old 3D blit code for bo moves in favor of CP DMA or sDMA - lots of bug fixes [airlied: fix up a bunch of conflicts from drm_order removal] * 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits) drm/radeon/dpm: make sure dc performance level limits are valid (CI) drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2) drm/radeon: gcc fixes for extended dpm tables drm/radeon: gcc fixes for kb/kv dpm drm/radeon: gcc fixes for ci dpm drm/radeon: gcc fixes for si dpm drm/radeon: gcc fixes for ni dpm drm/radeon: gcc fixes for trinity dpm drm/radeon: gcc fixes for sumo dpm drm/radeonn: gcc fixes for rv7xx/eg/btc dpm drm/radeon: gcc fixes for rv6xx dpm drm/radeon: gcc fixes for radeon_atombios.c drm/radeon: enable UVD interrupts on CIK drm/radeon: fix init ordering for r600+ drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume radeon kms: fix uninitialised hotplug work usage in r100_irq_process() drm/radeon/audio: set up the sads on DCE3.2 asics drm/radeon: fix handling of variable sized arrays for router objects ... Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/i915_gem_dmabuf.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/radeon/cik.c drivers/gpu/drm/radeon/ni.c drivers/gpu/drm/radeon/r600.c
2013-08-30drm/edid: add a helper function to extract the speaker allocation data block ↵Alex Deucher
(v3) This adds a helper function to extract the speaker allocation data block from the EDID. This data block describes what speakers are present on the display device. v2: update per Ville Syrjälä's comments v3: fix copy/paste typo in memory allocation Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Rafał Miłecki <zajec5@gmail.com>
2013-08-30drm/edid: add quirk for Medion MD30217PGAlex Deucher
This LCD monitor (1280x1024 native) has a completely bogus detailed timing (640x350@70hz). User reports that 1280x1024@60 has waves so prefer 1280x1024@75. Manufacturer: MED Model: 7b8 Serial#: 99188 Year: 2005 Week: 5 EDID Version: 1.3 Analog Display Input, Input Voltage Level: 0.700/0.700 V Sync: Separate Max Image Size [cm]: horiz.: 34 vert.: 27 Gamma: 2.50 DPMS capabilities: Off; RGB/Color Display First detailed timing is preferred mode redX: 0.645 redY: 0.348 greenX: 0.280 greenY: 0.605 blueX: 0.142 blueY: 0.071 whiteX: 0.313 whiteY: 0.329 Supported established timings: 720x400@70Hz 640x480@60Hz 640x480@72Hz 640x480@75Hz 800x600@56Hz 800x600@60Hz 800x600@72Hz 800x600@75Hz 1024x768@60Hz 1024x768@70Hz 1024x768@75Hz 1280x1024@75Hz Manufacturer's mask: 0 Supported standard timings: Supported detailed timing: clock: 25.2 MHz Image Size: 337 x 270 mm h_active: 640 h_sync: 688 h_sync_end 784 h_blank_end 800 h_border: 0 v_active: 350 v_sync: 350 v_sync_end 352 v_blanking: 449 v_border: 0 Monitor name: MD30217PG Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz Serial No: 501099188 EDID (in hex): 00ffffffffffff0034a4b80774830100 050f010368221b962a0c55a559479b24 125054afcf00310a0101010101018180 000000000000d60980a0205e63103060 0200510e1100001e000000fc004d4433 3032313750470a202020000000fd0038 4c1e530e000a202020202020000000ff 003530313039393138380a2020200078 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: friedrich@mailstation.de Cc: stable@vger.kernel.org
2013-08-30video/hdmi: Rename HDMI_IDENTIFIER to HDMI_IEEE_OUILespiau, Damien
HDMI_IDENTIFIER was felt too generic, rename it to what it is, the IEEE OUI corresponding to HDMI Licensing, LLC. http://standards.ieee.org/develop/regauth/oui/oui.txt Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm: Add a helper to forge HDMI vendor infoframesLespiau, Damien
This can then be used by DRM drivers to setup their vendor infoframes. v2: Fix hmdi typo (Simon Farnsworth) v3: Adapt to the hdmi_vendor_infoframe rename Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm/edid: Move HDMI_IDENTIFIER to hdmi.hLespiau, Damien
We'll need the HDMI OUI for the HDMI vendor infoframe data, so let's move the DRM one to hdmi.h, might as well use the hdmi header to store some hdmi defines. (Note that, in fact, infoframes are part of the CEA-861 standard, and only the HDMI vendor specific infoframe is special to HDMI, but details..) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30video/hdmi: Don't let the user of this API create invalid infoframesLespiau, Damien
To set the active aspect ratio value in the AVI infoframe today, you not only have to set the active_aspect field, but also the active_info_valid bit. Out of the 1 user of this API, we had 100% misuse, forgetting the _valid bit. This was fixed in: Author: Damien Lespiau <damien.lespiau@intel.com> Date: Tue Aug 6 20:32:17 2013 +0100 drm: Don't generate invalid AVI infoframes for CEA modes We can do better and derive the _valid bit from the user wanting to set the active aspect ratio. v2: Fix multi-lines comment style (Thierry Reding) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm: Add support for alternate clocks of 4k modesLespiau, Damien
v2: Fix hmdi typo (Simon Farnsworth, Ville Syrjälä) Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm/edid: Parse the HDMI CEA block and look for 4k modesLespiau, Damien
HDMI 1.4 adds 4 "4k x 2k" modes in the the CEA vendor specific block. With this commit, we now parse this block and expose the 4k modes that we find there. v2: Fix the "4096x2160" string (nice catch!), add comments about do_hdmi_vsdb_modes() arguments and make it clearer that offset is relative to the end of the required fields of the HDMI VSDB (Ville Syrjälä) v3: Fix 'Unknow' typo (Simon Farnsworth) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Tested-by: Cancan Feng <cancan.feng@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67030 Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm/edid: Fix add_cea_modes() style issuesLespiau, Damien
A few styles issues have crept in here, fix them before touching this code again. v2: constify arguments that can be (Ville Syrjälä) v3: constify, but better (Ville Syrjälä) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm: Don't export drm_find_cea_extension() any moreLespiau, Damien
This function is only used inside drm_edid.c. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-08drm: Set aspect ratio fields in the AVI infoframe even for non CEA modesDamien Lespiau
I cannot find any evidence what we shouldn't try to set those fields when setting a non-CEA mode on an HDMI sink. So just kill that return. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-08drm: Handle the DBLCLK flag in the common infoframe helperDamien Lespiau
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-08drm: Don't generate invalid AVI infoframes for CEA modesDamien Lespiau
From CEA-861: Data Byte 1, bit A0 indicates whether Active Format Data is present in Data Byte 2 bits R3 through R0. A source device shall set A0=1 when any of the AFD bits are set. ie. if we want to set active_aspect, we need to set the active_info_valid bit to 1 as well. Cc: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-04drm: add assertion for checking null edid to drm_edid_block_validSeung-Woo Kim
If raw_edid of drm_edid_block_vaild() is null, it will crash, so checking in bad label is removed and instead assertion is added at the top of the function. The type of return for the function is bool, so it fixes to return true and false instead of 1 and 0. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-23 15:55:20 +0000