aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/bridge
AgeCommit message (Collapse)Author
2019-10-07drm/rockchip: Check for fast link training before enabling psrSean Paul
[ Upstream commit ad309284a52be47c8b3126c9376358bf381861bc ] Once we start shutting off the link during PSR, we're going to want fast training to work. If the display doesn't support fast training, don't enable psr. Changes in v2: - None Changes in v3: - None Changes in v4: - None Changes in v5: - None Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-3-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-2-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-9-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-8-sean@poorly.run Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-8-sean@poorly.run Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-07drm/bridge: tc358767: Increase AUX transfer length limitAndrey Smirnov
[ Upstream commit e0655feaec62d5139b6b13a7b1bbb1ab8f1c2d83 ] According to the datasheet tc358767 can transfer up to 16 bytes via its AUX channel, so the artificial limit of 8 appears to be too low. However only up to 15-bytes seem to be actually supported and trying to use 16-byte transfers results in transfers failing sporadically (with bogus status in case of I2C transfers), so limit it to 15. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190619052716.16831-9-andrew.smirnov@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-06drm/bridge: tfp410: fix memleak in get_modes()Tomi Valkeinen
[ Upstream commit c08f99c39083ab55a9c93b3e93cef48711294dad ] We don't free the edid blob allocated by the call to drm_get_edid(), causing a memleak. Fix this by calling kfree(edid) at the end of the get_modes(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190610135739.6077-1-tomi.valkeinen@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-25drm/bridge: lvds-encoder: Fix build error while CONFIG_DRM_KMS_HELPER=mYueHaibing
[ Upstream commit f4cc743a98136df3c3763050a0e8223b52d9a960 ] If DRM_LVDS_ENCODER=y but CONFIG_DRM_KMS_HELPER=m, build fails: drivers/gpu/drm/bridge/lvds-encoder.o: In function `lvds_encoder_probe': lvds-encoder.c:(.text+0x155): undefined reference to `devm_drm_panel_bridge_add' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: dbb58bfd9ae6 ("drm/bridge: Fix lvds-encoder since the panel_bridge rework.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190729071216.27488-1-yuehaibing@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-31drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHzJyri Sarha
[ Upstream commit 8dbfc5b65023b67397aca28e8adb25c819f6398c ] The pixel clock unit in the first two registers (0x00 and 0x01) of sii9022 is 10kHz, not 1kHz as in struct drm_display_mode. Division by 10 fixes the issue. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1a2a8eae0b9d6333e7a5841026bf7fd65c9ccd09.1558964241.git.jsarha@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-31drm/bridge: tc358767: read display_props in get_modes()Tomi Valkeinen
[ Upstream commit 3231573065ad4f4ecc5c9147b24f29f846dc0c2f ] We need to know the link bandwidth to filter out modes we cannot support, so we need to have read the display props before doing the filtering. To ensure we have up to date display props, call tc_get_display_props() in the beginning of tc_connector_get_modes(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528082747.3631-22-tomi.valkeinen@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-15drm/bridge: adv7511: Fix low refresh rate selectionMatt Redfearn
[ Upstream commit 67793bd3b3948dc8c8384b6430e036a30a0ecb43 ] The driver currently sets register 0xfb (Low Refresh Rate) based on the value of mode->vrefresh. Firstly, this field is specified to be in Hz, but the magic numbers used by the code are Hz * 1000. This essentially leads to the low refresh rate always being set to 0x01, since the vrefresh value will always be less than 24000. Fix the magic numbers to be in Hz. Secondly, according to the comment in drm_modes.h, the field is not supposed to be used in a functional way anyway. Instead, use the helper function drm_mode_vrefresh(). Fixes: 9c8af882bf12 ("drm: Add adv7511 encoder driver") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190424132210.26338-1-matt.redfearn@thinci.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20drm/bridge: tc358767: fix output H/V syncsTomi Valkeinen
[ Upstream commit 7923e09c7a766e2d58de7fc395bb84c18e5bc625 ] The H and V syncs of the DP output are always set to active high. This patch fixes the syncs by configuring them according to the videomode. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-7-tomi.valkeinen@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20drm/bridge: tc358767: reject modes which require too much BWTomi Valkeinen
[ Upstream commit 51b9e62eb6950c762162ab7eb8390990179be067 ] The current driver accepts any videomode with pclk < 154MHz. This is not correct, as with 1 lane and/or 1.62Mbps speed not all videomodes can be supported. Add code to reject modes that require more bandwidth that is available. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-6-tomi.valkeinen@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20drm/bridge: tc358767: fix initial DP0/1_SRCCTRL valueTomi Valkeinen
[ Upstream commit 9a63bd6fe1b5590ffa42ae2ed22ee21363293e31 ] Initially DP0_SRCCTRL is set to a static value which includes DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of 1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number. This patch changes the configuration as follows: Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct value. DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL: SSCG and BW27. All other bits can be zero. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-5-tomi.valkeinen@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20drm/bridge: tc358767: fix single lane configurationTomi Valkeinen
[ Upstream commit 4d9d54a730434cc068dd3515ba6116697196f77b ] PHY_2LANE bit is always set in DP_PHY_CTRL, breaking 1 lane use. Set PHY_2LANE only when 2 lanes are used. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-4-tomi.valkeinen@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANETomi Valkeinen
[ Upstream commit adf4109896bbee27fd2ac3b48d22d6a0062fe517 ] DP1_SRCCTRL register and PHY_2LANE field did not have matching defines. Add these. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-3-tomi.valkeinen@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-20drm/bridge: tc358767: add bus flagsTomi Valkeinen
[ Upstream commit 4842379cbe6e851de914a7132f76f4e200b9a98b ] tc358767 driver does not set DRM bus_flags, even if it does configures the polarity settings into its registers. This means that the DPI source can't configure the polarities correctly. Add sync flags accordingly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-2-tomi.valkeinen@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-08-15Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.19. Rob has some new hardware support for new qualcomm hw that I'll send along separately. This has the display part of it, the remaining pull is for the acceleration engine. This also contains a wound-wait/wait-die mutex rework, Peter has acked it for merging via my tree. Otherwise mostly the usual level of activity. Summary: core: - Wound-wait/wait-die mutex rework - Add writeback connector type - Add "content type" property for HDMI - Move GEM bo to drm_framebuffer - Initial gpu scheduler documentation - GPU scheduler fixes for dying processes - Console deferred fbcon takeover support - Displayport support for CEC tunneling over AUX panel: - otm8009a panel driver fixes - Innolux TV123WAM and G070Y2-L01 panel driver - Ilitek ILI9881c panel driver - Rocktech RK070ER9427 LCD - EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6 - DLC DLC0700YZG-1 - BOE HV070WSA-100 - newhaven, nhd-4.3-480272ef-atxl LCD - DataImage SCF0700C48GGU18 - Sharp LQ035Q7DB03 - p079zca: Refactor to support multiple panels tinydrm: - ILI9341 display panel New driver: - vkms - virtual kms driver to testing. i915: - Icelake: Display enablement DSI support IRQ support Powerwell support - GPU reset fixes and improvements - Full ppgtt support refactoring - PSR fixes and improvements - Execlist improvments - GuC related fixes amdgpu: - Initial amdgpu documentation - JPEG engine support on VCN - CIK uses powerplay by default - Move to using core PCIE functionality for gens/lanes - DC/Powerplay interface rework - Stutter mode support for RV - Vega12 Powerplay updates - GFXOFF fixes - GPUVM fault debugging - Vega12 GFXOFF - DC improvements - DC i2c/aux changes - UVD 7.2 fixes - Powerplay fixes for Polaris12, CZ/ST - command submission bo_list fixes amdkfd: - Raven support - Power management fixes udl: - Cleanups and fixes nouveau: - misc fixes and cleanups. msm: - DPU1 support display controller in sdm845 - GPU coredump support. vmwgfx: - Atomic modesetting validation fixes - Support for multisample surfaces armada: - Atomic modesetting support completed. exynos: - IPPv2 fixes - Move g2d to component framework - Suspend/resume support cleanups - Driver cleanups imx: - CSI configuration improvements - Driver cleanups - Use atomic suspend/resume helpers - ipu-v3 V4L2 XRGB32/XBGR32 support pl111: - Add Nomadik LCDC variant v3d: - GPU scheduler jobs management sun4i: - R40 display engine support - TCON TOP driver mediatek: - MT2712 SoC support rockchip: - vop fixes omapdrm: - Workaround for DRA7 errata i932 - Fix mm_list locking mali-dp: - Writeback implementation PM improvements - Internal error reporting debugfs tilcdc: - Single fix for deferred probing hdlcd: - Teardown fixes tda998x: - Converted to a bridge driver. etnaviv: - Misc fixes" * tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits) drm/amdgpu/sriov: give 8s for recover vram under RUNTIME drm/scheduler: fix param documentation drm/i2c: tda998x: correct PLL divider calculation drm/i2c: tda998x: get rid of private fill_modes function drm/i2c: tda998x: move mode_valid() to bridge drm/i2c: tda998x: register bridge outside of component helper drm/i2c: tda998x: cleanup from previous changes drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create() drm/i2c: tda998x: convert to bridge driver drm/scheduler: fix timeout worker setup for out of order job completions drm/amd/display: display connected to dp-1 does not light up drm/amd/display: update clk for various HDMI color depths drm/amd/display: program display clock on cache match drm/amd/display: Add NULL check for enabling dp ss drm/amd/display: add vbios table check for enabling dp ss drm/amd/display: Don't share clk source between DP and HDMI drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo drm/amd/display: Use calculated disp_clk_khz value for dce110 drm/amd/display: Implement custom degamma lut on dcn drm/amd/display: Destroy aux_engines only once ...
2018-07-30BackMerge v4.18-rc7 into drm-nextDave Airlie
rmk requested this for armada and I think we've had a few conflicts build up. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-13drm: drop _mode_ from drm_mode_connector_attach_encoderDaniel Vetter
Again to align with the usual prefix of just drm_connector_. Again done with sed + manual fixup for indent issues. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-7-daniel.vetter@ffwll.ch
2018-07-13drm: drop _mode_ from update_edit_property()Daniel Vetter
Just makes it longer, and for most things in drm_connector.[hc] we just use the drm_connector_ prefix. Done with sed + a bit of manual fixup for the indenting. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-6-daniel.vetter@ffwll.ch
2018-07-10drm/panel: Make of_drm_find_panel() return an ERR_PTR() instead of NULLBoris Brezillon
Right now, the DRM panel logic returns NULL when a panel pointing to the passed OF node is not present in the list of registered panels. Most drivers interpret this NULL value as -EPROBE_DEFER, but we are about to modify the semantic of of_drm_find_panel() and let the framework return -ENODEV when the device node we're pointing to has a status property that is not equal to "okay" or "ok". Let's first patch the of_drm_find_panel() implementation to return ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace the '!panel' check by an 'IS_ERR(panel)' one. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-2-boris.brezillon@bootlin.com
2018-07-09drm/bridge: adv7511: Reset registers on hotplugSean Paul
The bridge loses its hw state when the cable is unplugged. If we detect this case in the hpd handler, reset its state. Reported-by: Rob Clark <robdclark@gmail.com> Tested-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180703165648.120401-1-seanpaul@chromium.org
2018-07-04drm/bridge/sii8620: Fix link mode selectionMaciej Purski
Current link mode values do not allow to enable packed pixel modes. Select packed pixel clock mode, if needed, every time the link mode register gets updated. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-4-git-send-email-m.purski@samsung.com
2018-07-04drm/bridge/sii8620: Fix display of packed pixel modesMaciej Purski
Current implementation does not guarantee packed pixel modes working with every dongle. There are some dongles, which require selecting the output mode explicitly. Write proper values to registers in packed_pixel mode, based on how it is done in vendor's code. Select output color space: RGB (no packed pixel) or YCBCR422 (packed pixel). This reverts commit e8b92efa629dac0e70ea4145c5e70616de5f89c8 ("drm/bridge/sii8620: fix display of packed pixel modes in MHL2"). Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-3-git-send-email-m.purski@samsung.com
2018-07-04drm/bridge/sii8620: Send AVI infoframe in all MHL versionsMaciej Purski
Currently AVI infoframe is sent only in MHL3. However, some MHL2 dongles need AVI infoframe to work correctly in either packed pixel mode or non-packed pixel mode. Send AVI infoframe in set_infoframes() in every case. Create an infoframe using drm_hdmi_infoframe_from_display_mode() instead of manually filling each infoframe structure's field. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-2-git-send-email-m.purski@samsung.com
2018-06-28Merge tag 'ib-fbdev-drm-v4.19-deferred-console-takeover' of ↵Gustavo Padovan
https://github.com/bzolnier/linux into drm-misc-next Immutable branch between fbdev and drm for the v4.19 merge window (contains the deferred console takeover feature) Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> # gpg: Signature made Thu 28 Jun 2018 10:24:50 AM -03 # gpg: using RSA key 7E33B63FA047C20B # gpg: Can't check signature: public key not found # Conflicts: # drivers/gpu/drm/i915/i915_gem.c # drivers/gpu/drm/i915/intel_crt.c # drivers/gpu/drm/i915/intel_display.c # drivers/gpu/drm/i915/intel_lrc.c Link: https://patchwork.freedesktop.org/patch/msgid/2462549.rLSfW9kX99@amdc3058
2018-06-22Merge tag 'drm-misc-next-2018-06-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.19: UAPI Changes: - Add writeback connector (Brian Starkey/Liviu Dudau) - Add "content type" property to HDMI connectors (Stanislav Lisovskiy) Cross-subsystem Changes: - some devicetree Docs update - fix compile breakage on ION due to the dma-buf cleanups (Christian König) Core Changes: - Reject over-sized allocation requests early (Chris Wilson) - gem-fb-helper: Always do implicit sync (Daniel Vetter) - dma-buf cleanups (Christian König) Driver Changes: - Fixes for the otm8009a panel driver (Philippe Cornu) - Add Innolux TV123WAM panel driver support (Sandeep Panda) - Move GEM BO to drm_framebuffer in few drivers (Daniel Stone) - i915 pinning improvements (Chris Wilson) - Stop consulting plane->fb/crtc in a few drivers (Ville Syrjälä) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621105428.GA20795@juma
2018-06-22Merge tag 'drm-misc-fixes-2018-06-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v4.18-rc2: - A reversion of a commit in drm/sun4i to fix a run-time fault. - Various fixes to the sii8620 bridge. - Small bugfix to correctly check stride in atmel-hlcdc. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/787d4bef-a579-4046-d0fc-f8c2c5b80c25@linux.intel.com
2018-06-21drm/bridge/sii8620: fix display of packed pixel modes in MHL2Maciej Purski
Currently packed pixel modes in MHL2 can't be displayed. The device automatically recognizes output format, so setting format other than RGB causes failure. Fix it by writing proper values to registers. Tested on MHL1 and MHL2 using various vendors' dongles both in DVI and HDMI mode. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1516706239-9104-1-git-send-email-m.purski@samsung.com
2018-06-20Merge drm-upstream/drm-next into drm-misc-nextGustavo Padovan
We got a few conflicts in drm_atomic.c after merging the DRM writeback support, now we need a backmerge to unlock develop development on drm-misc-next. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
2018-06-14drm/bridge: sil_sii8620: do not have a dependency of RC_COREInki Dae
This patch makes RC_CORE to be selected with this driver. sil_sii8620 driver calls remote controller interfaces directly so RC_CORE should be enabled mandatorily. And some boards not using remote controller device don't really need to know that RC_CORE config should be enabled to use sil_sii8620 driver only for HDMI. Changelog v2: - select INPUT because compiling will fail without INPUT. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1527154379-31886-1-git-send-email-inki.dae@samsung.com
2018-06-13drm/bridge/sii8620: fix HDMI cable connection to dongleMaciej Purski
MHL bridge is usually connected to TV via MHL dongle. Currently plugging HDMI cable to dongle is handled improperly. Fix it by splitting connecting of a dongle and a HDMI cable. The driver should now handle unplugging a sink from a dongle and plugging a different sink with new edid. Tested on MHL1, MHL2 and MHL3 using various vendors' dongles both in DVI and HDMI mode. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1516705996-8928-1-git-send-email-m.purski@samsung.com
2018-06-13drm/bridge/sii8620: remove HSIC initializationMaciej Purski
HSIC initialization was taken from the vendor code. HSIC in MHL circuit is not connected, so it is not possible to test it. Tests prove that without HSIC the device works well. Therefore it can be removed. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1511968368-30884-1-git-send-email-m.purski@samsung.com
2018-06-13drm/bridge/sii8620: start MHL transmission after HDMI signal detectionMaciej Purski
The vendor code waits for infoframe to detect video mode set by source. We do not need to follow this pattern, because video mode information is provided by drm core. As a result most of the infoframe handling code can be removed. Start transmission immediately after detecting stream on HDMI lines in irq_scdt() function without waiting for infoframe interrupt. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1511956130-24482-1-git-send-email-m.purski@samsung.com
2018-06-13drm/bridge/sii8620: fix potential buffer overflowMaciej Purski
Buffer overflow error should not occur, as mode_fixup() callback filters pixel clock value and it should never exceed 600000. However, current implementation is not obviously safe and relies on implementation of mode_fixup(). Make 'i' variable never reach unsafe value in order to avoid buffer overflow error. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: bf1722ca ("drm/bridge/sii8620: rewrite hdmi start sequence") Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1511341718-6974-1-git-send-email-m.purski@samsung.com
2018-06-13drm/bridge/sii8620: fix display modes validationMaciej Purski
Current implementation of mode_valid() and mode_fixup() callbacks handle packed pixel modes improperly. Fix it by using proper maximum clock values from the documentation. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1517568865-25219-1-git-send-email-m.purski@samsung.com
2018-06-13drm/bridge/sii8620: fix loops in EDID fetch logicAndrzej Hajda
Function should constantly check if cable is connected and finish in finite time. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Maciej Purski <m.purski@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180115173357.31067-4-a.hajda@samsung.com
2018-06-13drm/bridge/sii8620: simplify hardware reset procedureAndrzej Hajda
There is no need to flip reset pin twice. Also delays can be changed to values present in vendor's code. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Maciej Purski <m.purski@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180608060457.18357-1-a.hajda@samsung.com
2018-06-06Merge tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This starts to support NVIDIA volta hardware with nouveau, and adds amdgpu support for the GPU in the Kabylake-G (the intel + radeon single package chip), along with some initial Intel icelake enabling. Summary: New Drivers: - v3d - driver for broadcom V3D V3.x+ hardware - xen-front - XEN PV display frontend core: - handle zpos normalization in the core - stop looking at legacy pointers in atomic paths - improved scheduler documentation - improved aspect ratio validation - aspect ratio support for 64:27 and 256:135 - drop unused control node code. i915: - Icelake (ICL) enabling - GuC/HuC refactoring - PSR/PSR2 enabling and fixes - DPLL management refactoring - DP MST fixes - NV12 enabling - HDCP improvements - GEM/Execlist/reset improvements - GVT improvements - stolen memory first 4k fix amdgpu: - Vega 20 support - VEGAM support (Kabylake-G) - preOS scanout buffer reservation - power management gfxoff support for raven - SR-IOV fixes - Vega10 power profiles and clock voltage control - scatter/gather display support on CZ/ST amdkfd: - GFX9 dGPU support - userptr memory mapping nouveau: - major refactoring for Volta GV100 support tda998x: - HDMI i2c CEC support etnaviv: - removed unused logging code - license text cleanups - MMU handling improvements - timeout fence fix for 50 days uptime tegra: - IOMMU support in gr2d/gr3d drivers - zpos support vc4: - syncobj support - CTM, plane alpha and async cursor support analogix_dp: - HPD and aux chan fixes sun4i: - MIPI DSI support tilcdc: - clock divider fixes for OMAP-l138 LCDK board rcar-du: - R8A77965 support - dma-buf fences fixes - hardware indexed crtc/du group handling - generic zplane property support atmel-hclcdc: - generic zplane property support mediatek: - use generic video mode function exynos: - S5PV210 FIMD variant support - IPP v2 framework - more HW overlays support" * tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drm: (1286 commits) drm/amdgpu: fix 32-bit build warning drm/exynos: fimc: signedness bug in fimc_setup_clocks() drm/exynos: scaler: fix static checker warning drm/amdgpu: Use dev_info() to report amdkfd is not supported for this ASIC drm/amd/display: Remove use of division operator for long longs drm/amdgpu: Update GFX info structure to match what vega20 used drm/amdgpu/pp: remove duplicate assignment drm/sched: add rcu_barrier after entity fini drm/amdgpu: move VM BOs on LRU again drm/amdgpu: consistenly use VM moved flag drm/amdgpu: kmap PDs/PTs in amdgpu_vm_update_directories drm/amdgpu: further optimize amdgpu_vm_handle_moved drm/amdgpu: cleanup amdgpu_vm_validate_pt_bos v2 drm/amdgpu: rework VM state machine lock handling v2 drm/amdgpu: Add runtime VCN PG support drm/amdgpu: Enable VCN static PG by default on RV drm/amdgpu: Add VCN static PG support on RV drm/amdgpu: Enable VCN CG by default on RV drm/amdgpu: Add static CG control for VCN on RV drm/exynos: Fix default value for zpos plane property ...
2018-05-30drm/bridge/synopsys: dw-hdmi: fix dw_hdmi_setup_rx_senseNeil Armstrong
The dw_hdmi_setup_rx_sense exported function should not use struct device to recover the dw-hdmi context using drvdata, but take struct dw_hdmi directly like other exported functions. This caused a regression using Meson DRM on S905X since v4.17-rc1 : Internal error: Oops: 96000007 [#1] PREEMPT SMP [...] CPU: 0 PID: 124 Comm: irq/32-dw_hdmi_ Not tainted 4.17.0-rc7 #2 Hardware name: Libre Technology CC (DT) [...] pc : osq_lock+0x54/0x188 lr : __mutex_lock.isra.0+0x74/0x530 [...] Process irq/32-dw_hdmi_ (pid: 124, stack limit = 0x00000000adf418cb) Call trace: osq_lock+0x54/0x188 __mutex_lock_slowpath+0x10/0x18 mutex_lock+0x30/0x38 __dw_hdmi_setup_rx_sense+0x28/0x98 dw_hdmi_setup_rx_sense+0x10/0x18 dw_hdmi_top_thread_irq+0x2c/0x50 irq_thread_fn+0x28/0x68 irq_thread+0x10c/0x1a0 kthread+0x128/0x130 ret_from_fork+0x10/0x18 Code: 34000964 d00050a2 51000484 9135c042 (f864d844) ---[ end trace 945641e1fbbc07da ]--- note: irq/32-dw_hdmi_[124] exited with preempt_count 1 genirq: exiting task "irq/32-dw_hdmi_" (124) is an active IRQ thread (irq 32) Fixes: eea034af90c6 ("drm/bridge/synopsys: dw-hdmi: don't clobber drvdata") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1527673438-20643-1-git-send-email-narmstrong@baylibre.com
2018-05-18drm/bridge: cdns: Mark runtime PM operations as maybe unusedThierry Reding
Building the driver in a configuration with !PM currently causes a warning about these operations being unused. Mark them as such to shut up the compiler. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180426135853.30895-1-thierry.reding@gmail.com
2018-05-18Merge drm-fixes-for-v4.17-rc6-urgent into drm-nextDave Airlie
Need to backmerge some nouveau fixes to reduce the nouveau -next conflicts a lot. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-05-15Merge tag 'drm-misc-next-2018-05-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.18: UAPI Changes: - Fix render node number regression from control node removal. Driver Changes: - Small header fix for virgl, used by qemu. - Use vm_fault_t in qxl. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Tue 15 May 2018 06:16:03 PM AEST # gpg: using RSA key FE558C72A67013C3 # gpg: Can't check signature: public key not found Link: https://patchwork.freedesktop.org/patch/msgid/e63306b9-67a0-74ab-8883-08b3d9db72d2@mblankhorst.nl
2018-05-15Merge tag 'exynos-drm-next-for-v4.18' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next - Add S5PV210 FIMD variant support. - Add IPP v2 framework. . it is a rewritten version of the Exynos mem-to-mem image processing framework which supprts color space conversion, image up/down-scaling and rotation. This new version replaces existing userspace API with new easy-to-use and simple ones so we have already applied the use of these API to real user, Tizen Platform[1], and also makes existing Scaler, FIMC, GScaler and Rotator drivers to use IPP v2 core API. And below are patch lists we have applied to a real user, https://git.tizen.org/cgit/platform/adaptation/samsung_exynos/libtdm-exynos/log/?h=tizen&qt=grep&q=ipp https://git.tizen.org/cgit/platform/adaptation/samsung_exynos/libtdm-exynos/commit/?h=tizen&id=b59be207365d10efd489e6f71c8a045b558c44fe https://git.tizen.org/cgit/platform/kernel/linux-exynos/log/?h=tizen&qt=grep&q=ipp TDM(Tizen Display Manager) is a Display HAL for Tizen platform. Ps. Only real user using IPP API is Tizen. [1] https://www.tizen.org/ - Two cleanups . One is to just remove mode_set callback from MIPI-DSI driver because drm_display_mode data is already available from crtc atomic state. . And other is to just use new return type, vm_fault_t for page fault handler. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Mon 14 May 2018 14:23:53 AEST # gpg: using RSA key 573834890C4312B8 # gpg: Can't check signature: public key not found Link: https://patchwork.freedesktop.org/patch/msgid/1526276453-29879-1-git-send-email-inki.dae@samsung.com
2018-05-11Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst
drm-misc-next is still based on v4.16-rc7, and was getting a bit stale. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-05-07drm/bridge/sii8620: add Kconfig dependency on extconAndrzej Hajda
The driver can work with or without extcon framework, but if extcon is build as module, sii8620 should be build as module as well. Fixes: 688838442147 ("drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180409062708.4326-1-a.hajda@samsung.com Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-05-04gpu: drm: bridge: adv7511: Replace mdelay with usleep_range in adv7511_probeJia-Ju Bai
adv7511_probe() is never called in atomic context. This function is only set as ".probe" in struct i2c_driver. Despite never getting called from atomic context, adv7511_probe() calls mdelay() to busily wait. This is not necessary and can be replaced with usleep_range() to avoid busy waiting. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/1523435622-4329-1-git-send-email-baijiaju1990@gmail.com
2018-05-04drm/bridge: adv7511: fix spelling of driver name in KconfigPeter Rosin
Could perhaps prevent some confusion. Signed-off-by: Peter Rosin <peda@axentia.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180426213644.29318-1-peda@axentia.se
2018-05-02drm/bridge: vga-dac: Fix edid memory leakSean Paul
edid should be freed once it's finished being used. Fixes: 56fe8b6f4991 ("drm/bridge: Add RGB to VGA bridge support") Cc: Rob Herring <robh@kernel.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: <stable@vger.kernel.org> # v4.9+ Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180420190007.1572-1-seanpaul@chromium.org
2018-04-30Merge tag 'drm-misc-next-2018-04-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.18: UAPI Changes: - Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime) Core Changes: - Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville) - mode_valid return type fixes. (Luc) - Handle zpos normalization in the core. (Peter) Driver Changes: - Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan) - Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas) - Add support for MIPI DSI to sun4i. (Maxime) Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Thu 26 Apr 2018 08:21:01 PM AEST # gpg: using RSA key FE558C72A67013C3 # gpg: Can't check signature: public key not found Link: https://patchwork.freedesktop.org/patch/msgid/b33da7eb-efc9-ae6f-6f69-b7acd6df6797@mblankhorst.nl
2018-04-26drm/bridge/synopsys: dsi: use adjusted_mode in mode_setPhilippe CORNU
The "adjusted_mode" clock value (ie the real pixel clock) is more accurate than "mode" clock value (ie the panel/bridge requested clock value). It offers a better preciseness for timing computations and allows to reduce the extra dsi bandwidth in burst mode (from ~20% to ~10-12%, hw platform dependent). Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Yannick Fertré <yannick.fertre@st.com> Tested-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180125155504.8611-1-philippe.cornu@st.com
2018-04-25drm/bridge: tc358767: fix mode_valid's return typeLuc Van Oostenryck
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180424131453.1961-1-luc.vanoostenryck@gmail.com
2018-04-25drm/bridge: adv7511: fix mode_valid's return typeLuc Van Oostenryck
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180424131450.1910-1-luc.vanoostenryck@gmail.com
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-24 22:43:06 +0000