Age | Commit message (Collapse) | Author |
|
|
|
commit 7a4be6c113c1f721818d1e3722a9015fe393295c upstream.
In case of AEAD decryption verifcation error we were using the
wrong value to zero out the plaintext buffer leaving the end of
the buffer with the false plaintext.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Fixes: ff27e85a85bb ("crypto: ccree - add AEAD support")
CC: stable@vger.kernel.org # v4.17+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 76a95bd8f9e10cade9c4c8df93b5c20ff45dc0f5 upstream.
When ccree driver runs it checks the state of the Trusted Execution
Environment CryptoCell driver before proceeding. We did not account
for cases where the TEE side is not ready or not available at all.
Fix it by only considering TEE error state after sync with the TEE
side driver.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Fixes: ab8ec9658f5a ("crypto: ccree - add FIPS support")
CC: stable@vger.kernel.org # v4.17+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 48f89d2a2920166c35b1c0b69917dbb0390ebec7 upstream.
IV transfer from ofifo to class2 (set up at [29][30]) is not guaranteed
to be scheduled before the data transfer from ofifo to external memory
(set up at [38]:
[29] 10FA0004 ld: ind-nfifo (len=4) imm
[30] 81F00010 <nfifo_entry: ofifo->class2 type=msg len=16>
[31] 14820004 ld: ccb2-datasz len=4 offs=0 imm
[32] 00000010 data:0x00000010
[33] 8210010D operation: cls1-op aes cbc init-final enc
[34] A8080B04 math: (seqin + math0)->vseqout len=4
[35] 28000010 seqfifold: skip len=16
[36] A8080A04 math: (seqin + math0)->vseqin len=4
[37] 2F1E0000 seqfifold: both msg1->2-last2-last1 len=vseqinsz
[38] 69300000 seqfifostr: msg len=vseqoutsz
[39] 5C20000C seqstr: ccb2 ctx len=12 offs=0
If ofifo -> external memory transfer happens first, DECO will hang
(issuing a Watchdog Timeout error, if WDOG is enabled) waiting for
data availability in ofifo for the ofifo -> c2 ififo transfer.
Make sure IV transfer happens first by waiting for all CAAM internal
transfers to end before starting payload transfer.
New descriptor with jump command inserted at [37]:
[..]
[36] A8080A04 math: (seqin + math0)->vseqin len=4
[37] A1000401 jump: jsl1 all-match[!nfifopend] offset=[01] local->[38]
[38] 2F1E0000 seqfifold: both msg1->2-last2-last1 len=vseqinsz
[39] 69300000 seqfifostr: msg len=vseqoutsz
[40] 5C20000C seqstr: ccb2 ctx len=12 offs=0
[Note: the issue is present in the descriptor from the very beginning
(cf. Fixes tag). However I've marked it v4.19+ since it's the oldest
maintained kernel that the patch applies clean against.]
Cc: <stable@vger.kernel.org> # v4.19+
Fixes: 1acebad3d8db8 ("crypto: caam - faster aead implementation")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 51fab3d73054ca5b06b26e20edac0486b052c6f4 upstream.
ERN handler calls the caam/qi frontend "done" callback with a status
of -EIO. This is incorrect, since the callback expects a status value
meaningful for the crypto engine - hence the cryptic messages
like the one below:
platform caam_qi: 15: unknown error source
Fix this by providing the callback with:
-the status returned by the crypto engine (fd[status]) in case
it contains an error, OR
-a QI "No error" code otherwise; this will trigger the message:
platform caam_qi: 50000000: Queue Manager Interface: No error
which is fine, since QMan driver provides details about the cause of
failure
Cc: <stable@vger.kernel.org> # v5.1+
Fixes: 67c2315def06 ("crypto: caam - add Queue Interface (QI) backend support")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit c552ffb5c93d9d65aaf34f5f001c4e7e8484ced1 upstream.
When using single_open() for opening, single_release() should be
used instead of seq_release(), otherwise there is a memory leak.
Fixes: 09ae5d37e093 ("crypto: zip - Add Compression/Decompression statistics")
Cc: <stable@vger.kernel.org>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 1b82feb6c5e1996513d0fb0bbb475417088b4954 upstream.
It seems that smp_processor_id() is only used for a best-effort
load-balancing, refer to qat_crypto_get_instance_node(). It's not feasible
to disable preemption for the duration of the crypto requests. Therefore,
just silence the warning. This commit is similar to e7a9b05ca4
("crypto: cavium - Fix smp_processor_id() warnings").
Silences the following splat:
BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/2904
caller is qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat]
CPU: 1 PID: 2904 Comm: cryptomgr_test Tainted: P O 4.14.69 #1
...
Call Trace:
dump_stack+0x5f/0x86
check_preemption_disabled+0xd3/0xe0
qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat]
skcipher_setkey_ablkcipher+0x2b/0x40
__test_skcipher+0x1f3/0xb20
? cpumask_next_and+0x26/0x40
? find_busiest_group+0x10e/0x9d0
? preempt_count_add+0x49/0xa0
? try_module_get+0x61/0xf0
? crypto_mod_get+0x15/0x30
? __kmalloc+0x1df/0x1f0
? __crypto_alloc_tfm+0x116/0x180
? crypto_skcipher_init_tfm+0xa6/0x180
? crypto_create_tfm+0x4b/0xf0
test_skcipher+0x21/0xa0
alg_test_skcipher+0x3f/0xa0
alg_test.part.6+0x126/0x2a0
? finish_task_switch+0x21b/0x260
? __schedule+0x1e9/0x800
? __wake_up_common+0x8d/0x140
cryptomgr_test+0x40/0x50
kthread+0xff/0x130
? cryptomgr_notify+0x540/0x540
? kthread_create_on_node+0x70/0x70
ret_from_fork+0x24/0x50
Fixes: ed8ccaef52 ("crypto: qat - Add support for SRIOV")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
|
|
|
|
[ Upstream commit 24fbf7bad888767bed952f540ac963bc57e47e15 ]
There are two problems in sec_free_hw_sgl():
First, when sgl_current->next is valid, @hw_sgl will be freed in the
first loop, but it free again after the loop.
Second, sgl_current and sgl_current->next_sgl is not match when
dma_pool_free() is invoked, the third parameter should be the dma
address of sgl_current, but sgl_current->next_sgl is the dma address
of next chain, so use sgl_current->next_sgl is wrong.
Fix this by deleting the last dma_pool_free() in sec_free_hw_sgl(),
modifying the condition for while loop, and matching the address for
dma_pool_free().
Fixes: 915e4e8413da ("crypto: hisilicon - SEC security accelerator driver")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 5fc194ea6d34dfad9833d3043ce41d6c52aff39a upstream.
Add missing break statement in order to prevent the code from falling
through to case CRYPTO_ALG_TYPE_AHASH.
Fixes: aeb4c132f33d ("crypto: talitos - Convert to new AEAD interface")
Cc: stable@vger.kernel.org
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
commit 4bbfb839259a9c96a0be872e16f7471b7136aee5 upstream.
In that mode, hardware ICV verification is not supported.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 7405c8d7ff97 ("crypto: talitos - templates for AEAD using HMAC_SNOOP_NO_AFEU")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ede4c36cf7c6516986ee9d75b197c8bf73ea96f upstream.
For decrypt, req->cryptlen includes the size of the authentication
part while all functions of the driver expect cryptlen to be
the size of the encrypted data.
As it is not expected to change req->cryptlen, this patch
implements local calculation of cryptlen.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 9c4a79653b35 ("crypto: talitos - Freescale integrated security engine (SEC) driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d84cc9c9524ec5973a337533e6d8ccd3e5f05f2b upstream.
ECB's ivsize must be 0.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 5e75ae1b3cef ("crypto: talitos - add new crypto modes")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ee483d32ee1a1a7f7d7e918fbc350c790a5af64a upstream.
When data size is not a multiple of the alg's block size,
the SEC generates an error interrupt and dumps the registers.
And for NULL size, the SEC does just nothing and the interrupt
is awaited forever.
This patch ensures the data size is correct before submitting
the request to the SEC engine.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 4de9d0b547b9 ("crypto: talitos - Add ablkcipher algorithms")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b9a05b6041cb9810a291315569b2af0d63c3680a upstream.
CTR has a blocksize of 1.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 5e75ae1b3cef ("crypto: talitos - add new crypto modes")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1ba34e71e9e56ac29a52e0d42b6290f3dc5bfd90 upstream.
Although the HW accepts any size and silently truncates
it to the correct length, the extra tests expects EINVAL
to be returned when the key size is not valid.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 4de9d0b547b9 ("crypto: talitos - Add ablkcipher algorithms")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
commit 5871cd93692c8071fb9358daccb715b5081316ac upstream.
If a CCP is unconfigured (e.g. there are no available queues) then
there will be no data structures allocated for the device. Thus, we
must check for validity of a pointer before trying to access structure
members.
Fixes: 720419f01832f ("crypto: ccp - Introduce the AMD Secure Processor device")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c007d3fe45392f57289555bc837aa014deb32cd7 from
git@git.assembla.com:cavium/WindRiver.linux.git
We are going to upstream CPT kernel driver(otx, otx2). The respective
files will be placed in drivers/crypto/marvell. But it already has
marvell CESA driver files (namely cesa.c cesa.h cipher.c hash.c
Makefile tdma.c).
So moving the above existing files to a new directory(cesa)
under drivers/crypto/marvell.
Change-Id: Ic8c0a539d34dac44dd02199a9884112ab570b237
Signed-off-by: SrujanaChalla <schalla@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/13448
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Tested-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
|
|
commit e2664ecbb2f26225ac6646876f2899558ffb2604 upstream.
AES GCM input buffers for decryption contain AAD+CTEXT+TAG. Only
decrypt the ciphertext, and use the tag for comparison.
Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9f00baf74e4b6f79a3a3dfab44fb7bb2e797b551 upstream.
AES GCM encryption allows for authsize values of 4, 8, and 12-16 bytes.
Validate the requested authsize, and retain it to save in the request
context.
Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 25e44338321af545ab34243a6081c3f0fc6107d0 upstream.
A plaintext or ciphertext length of 0 is allowed in AES, in which case
no encryption occurs. Ensure that we don't clean up data structures
that were never allocated.
Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 83bf42510d7f7e1daa692c096e8e9919334d7b57 ]
SEV_VERSION_GREATER_OR_EQUAL() will fail if upgrading from 2.2 to 3.1, for
example, because the minor version is not equal to or greater than the
major.
Fix this and move to a static inline function for appropriate type
checking.
Fixes: edd303ff0e9e ("crypto: ccp - Add DOWNLOAD_FIRMWARE SEV command")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 95566aa75cd6b3b404502c06f66956b5481194b3 upstream.
There is a possible double free issue in ppc4xx_trng_probe():
85: dev->trng_base = of_iomap(trng, 0);
86: of_node_put(trng); ---> released here
87: if (!dev->trng_base)
88: goto err_out;
...
110: ierr_out:
111: of_node_put(trng); ---> double released here
...
This issue was detected by using the Coccinelle software.
We fix it by removing the unnecessary of_node_put().
Fixes: 5343e674f32f ("crypto4xx: integrate ppc4xx-rng into crypto4xx")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: <stable@vger.kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Allison Randal <allison@lohutok.net>
Cc: Armijn Hemel <armijn@tjaldur.nl>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 538a5a072e6ef04377b180ee9b3ce5bae0a85da4 upstream.
Avoid leaking GCM tag through timing side channel.
Fixes: 36cf515b9bbe ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Cfir Cohen <cfir@google.com>
Acked-by: Gary R Hook <ghook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 20e833dc36355ed642d00067641a679c618303fa upstream.
The AES GCM function reuses an 'op' data structure, which members
contain values that must be cleared for each (re)use.
This fix resolves a crypto self-test failure:
alg: aead: gcm-aes-ccp encryption test failed (wrong result) on test vector 2, cfg="two even aligned splits"
Fixes: 36cf515b9bbe ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0f7a81374060828280fcfdfbaa162cb559017f9f upstream.
The hardware automatically zero pads incomplete block ciphers
blocks without raising any errors. This is a screw-up. This
was noticed by CONFIG_CRYPTO_MANAGER_EXTRA_TESTS tests that
sent a incomplete blocks and expect them to fail.
This fixes:
cbc-aes-ppc4xx encryption unexpectedly succeeded on test vector
"random: len=2409 klen=32"; expected_error=-22, cfg="random:
may_sleep use_digest src_divs=[96.90%@+2295, 2.34%@+4066,
0.32%@alignmask+12, 0.34%@+4087, 0.9%@alignmask+1787, 0.1%@+3767]
iv_offset=6"
ecb-aes-ppc4xx encryption unexpectedly succeeded on test vector
"random: len=1011 klen=32"; expected_error=-22, cfg="random:
may_sleep use_digest src_divs=[100.0%@alignmask+20]
dst_divs=[3.12%@+3001, 96.88%@+4070]"
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org [4.19, 5.0 and 5.1]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 70c4997f34b6c6888b3ac157adec49e01d0df2d5 upstream.
While the hardware consider them to be blockciphers, the
reference implementation defines them as streamciphers.
Do the right thing and set the blocksize to 1. This
was found by CONFIG_CRYPTO_MANAGER_EXTRA_TESTS.
This fixes the following issues:
skcipher: blocksize for ofb-aes-ppc4xx (16) doesn't match generic impl (1)
skcipher: blocksize for cfb-aes-ppc4xx (16) doesn't match generic impl (1)
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Fixes: f2a13e7cba9e ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bfa2ba7d9e6b20aca82b99e6842fe18842ae3a0f upstream.
This patch fixes a issue with crypto4xx's ctr(aes) that was
discovered by libcapi's kcapi-enc-test.sh test.
The some of the ctr(aes) encryptions test were failing on the
non-power-of-two test:
kcapi-enc - Error: encryption failed with error 0
kcapi-enc - Error: decryption failed with error 0
[FAILED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (128 bits):
original file (1d100e..cc96184c) and generated file (e3b0c442..1b7852b855)
[FAILED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (128 bits)
(openssl generated CT): original file (e3b0..5) and generated file (3..8e)
[PASSED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (128 bits)
(openssl generated PT)
[FAILED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (password):
original file (1d1..84c) and generated file (e3b..852b855)
But the 16, 32, 512, 65536 tests always worked.
Thankfully, this isn't a hidden hardware problem like previously,
instead this turned out to be a copy and paste issue.
With this patch, all the tests are passing with and
kcapi-enc-test.sh gives crypto4xx's a clean bill of health:
"Number of failures: 0" :).
Cc: stable@vger.kernel.org
Fixes: 98e87e3d933b ("crypto: crypto4xx - add aes-ctr support")
Fixes: f2a13e7cba9e ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 52393d617af7b554f03531e6756facf2ea687d2e upstream.
The error code read from the queue status register is only 6 bits wide,
but we need to verify its value is within range before indexing the error
messages.
Fixes: 81422badb3907 ("crypto: ccp - Make syslog errors human-readable")
Cc: <stable@vger.kernel.org>
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ed527b13d800dd515a9e6c582f0a73eca65b2e1b upstream.
The CAAM driver currently violates an undocumented and slightly
controversial requirement imposed by the crypto stack that a buffer
referred to by the request structure via its virtual address may not
be modified while any scatterlists passed via the same request
structure are mapped for inbound DMA.
This may result in errors like
alg: aead: decryption failed on test 1 for gcm_base(ctr-aes-caam,ghash-generic): ret=74
alg: aead: Failed to load transform for gcm(aes): -2
on non-cache coherent systems, due to the fact that the GCM driver
passes an IV buffer by virtual address which shares a cacheline with
the auth_tag buffer passed via a scatterlist, resulting in corruption
of the auth_tag when the IV is updated while the DMA mapping is live.
Since the IV that is returned to the caller is only valid for CBC mode,
and given that the in-kernel users of CBC (such as CTS) don't trigger the
same issue as the GCM driver, let's just disable the output IV generation
for all modes except CBC for the time being.
Fixes: 854b06f76879 ("crypto: caam - properly set IV after {en,de}crypt")
Cc: Horia Geanta <horia.geanta@nxp.com>
Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
descriptors
[ Upstream commit 89332590427235680236b9470e851afc49b3caa1 ]
When performing a transformation the hardware is given result
descriptors to save the result data. Those result descriptors are
batched using a 'first' and a 'last' bit. There are cases were more
descriptors than needed are given to the engine, leading to the engine
only using some of them, and not setting the last bit on the last
descriptor we gave. This causes issues were the driver and the hardware
aren't in sync anymore about the number of result descriptors given (as
the driver do not give a pool of descriptor to use for any
transformation, but a pool of descriptors to use *per* transformation).
This patch fixes it by attaching the number of given result descriptors
to the requests, and by using this number instead of the 'last' bit
found on the descriptors to process them.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c9cca7034b34a2d82e9a03b757de2485c294851c ]
The MPC885 reference manual states:
SEC Lite-initiated 8xx writes can occur only on 32-bit-word boundaries, but
reads can occur on any byte boundary. Writing back a header read from a
non-32-bit-word boundary will yield unpredictable results.
In order to ensure that, cra_alignmask is set to 3 for SEC1.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 9c4a79653b35 ("crypto: talitos - Freescale integrated security engine (SEC) driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eae55a586c3c8b50982bad3c3426e9c9dd7a0075 ]
The driver assumes that the ICV is as a single piece in the last
element of the scatterlist. This assumption is wrong.
This patch ensures that the ICV is properly handled regardless of
the scatterlist layout.
Fixes: 9c4a79653b35 ("crypto: talitos - Freescale integrated security engine (SEC) driver")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dcd9c76e5a183af4f793beb5141efcd260b8d09f ]
When enabling IOMMU support, the following issue becomes visible
in the AEAD zero-length case.
Even though the output sequence length is set to zero, the crypto engine
tries to prefetch 4 S/G table entries (since SGF bit is set
in SEQ OUT PTR command - which is either generated in SW in case of
caam/jr or in HW in case of caam/qi, caam/qi2).
The DMA read operation will trigger an IOMMU fault since the address in
the SEQ OUT PTR is "dummy" (set to zero / not obtained via DMA API
mapping).
1. In case of caam/jr, avoid the IOMMU fault by clearing the SGF bit
in SEQ OUT PTR command.
2. In case of caam/qi - setting address, bpid, length to zero for output
entry in the compound frame has a special meaning (cf. CAAM RM):
"Output frame = Unspecified, Input address = Y. A unspecified frame is
indicated by an unused SGT entry (an entry in which the Address, Length,
and BPID fields are all zero). SEC obtains output buffers from BMan as
prescribed by the preheader."
Since no output buffers are needed, modify the preheader by setting
(ABS = 1, ADDBUF = 0):
-"ABS = 1 means obtain the number of buffers in ADDBUF (0 or 1) from
the pool POOL ID"
-ADDBUF: "If ABS is set, ADD BUF specifies whether to allocate
a buffer or not"
3. In case of caam/qi2, since engine:
-does not support FLE[FMT]=2'b11 ("unused" entry) mentioned in DPAA2 RM
-requires output entry to be present, even if not used
the solution chosen is to leave output frame list entry zeroized.
Fixes: 763069ba49d3 ("crypto: caam - handle zero-length AEAD output")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3e03e792865ae48b8cfc69a0b4d65f02f467389f ]
Selftests report the following:
[ 2.984845] alg: skcipher: cbc-aes-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[ 2.995377] 00000000: 3d af ba 42 9d 9e b4 30 b4 22 da 80 2c 9f ac 41
[ 3.032673] alg: skcipher: cbc-des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[ 3.043185] 00000000: fe dc ba 98 76 54 32 10
[ 3.063238] alg: skcipher: cbc-3des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[ 3.073818] 00000000: 7d 33 88 93 0f 93 b2 42
This above dumps show that the actual output IV is indeed the input IV.
This is due to the IV not being copied back into the request.
This patch fixes that.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e52d484d9869eb291140545746ccbe5ffc7c9306 upstream.
System gets checkstop if RxFIFO overruns with more requests than the
maximum possible number of CRBs in FIFO at the same time. The max number
of requests per window is controlled by window credits. So find max
CRBs from FIFO size and set it to receive window credits.
Fixes: b0d6c9bab5e4 ("crypto/nx: Add P9 NX support for 842 compression engine")
CC: stable@vger.kernel.org # v4.14+
Signed-off-by:Haren Myneni <haren@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
commit 58cdbc6d2263beb36954408522762bbe73169306 upstream.
On SEC1, hash provides wrong result when performing hashing in several
steps with input data SG list has more than one element. This was
detected with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS:
[ 44.185947] alg: hash: md5-talitos test failed (wrong result) on test vector 6, cfg="random: may_sleep use_finup src_divs=[<reimport>25.88%@+8063, <flush>24.19%@+9588, 28.63%@+16333, <reimport>4.60%@+6756, 16.70%@+16281] dst_divs=[71.61%@alignmask+16361, 14.36%@+7756, 14.3%@+"
[ 44.325122] alg: hash: sha1-talitos test failed (wrong result) on test vector 3, cfg="random: inplace use_final src_divs=[<flush,nosimd>16.56%@+16378, <reimport>52.0%@+16329, 21.42%@alignmask+16380, 10.2%@alignmask+16380] iv_offset=39"
[ 44.493500] alg: hash: sha224-talitos test failed (wrong result) on test vector 4, cfg="random: use_final nosimd src_divs=[<reimport>52.27%@+7401, <reimport>17.34%@+16285, <flush>17.71%@+26, 12.68%@+10644] iv_offset=43"
[ 44.673262] alg: hash: sha256-talitos test failed (wrong result) on test vector 4, cfg="random: may_sleep use_finup src_divs=[<reimport>60.6%@+12790, 17.86%@+1329, <reimport>12.64%@alignmask+16300, 8.29%@+15, 0.40%@+13506, <reimport>0.51%@+16322, <reimport>0.24%@+16339] dst_divs"
This is due to two issues:
- We have an overlap between the buffer used for copying the input
data (SEC1 doesn't do scatter/gather) and the chained descriptor.
- Data copy is wrong when the previous hash left less than one
blocksize of data to hash, implying a complement of the previous
block with a few bytes from the new request.
Fix it by:
- Moving the second descriptor after the buffer, as moving the buffer
after the descriptor would make it more complex for other cipher
operations (AEAD, ABLKCIPHER)
- Skip the bytes taken from the new request to complete the previous
one by moving the SG list forward.
Fixes: 37b5e8897eb5 ("crypto: talitos - chain in buffered data for ahash on SEC1")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d44769e4ccb636e8238adbc151f25467a536711b upstream.
Moves struct talitos_edesc into talitos.h so that it can be used
from any place in talitos.c
It will be required for next patch ("crypto: talitos - fix hash
on SEC1")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a1a42f84011fae6ff08441a91aefeb7febc984fc upstream.
The talitos driver has two ways to perform AEAD depending on the
HW capability. Some HW support both. It is needed to give them
different names to distingish which one it is for instance when
a test fails.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 7405c8d7ff97 ("crypto: talitos - templates for AEAD using HMAC_SNOOP_NO_AFEU")
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation the gpl this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
version 2 gplv2 for more details you should have received a copy of
the gnu general public license version 2 gplv2 along with this
source code
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 16 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081201.771169395@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundations version 2 only this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability of
fitness for a particupar purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 675 mass ave cambridge ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.600052164@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 101 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 only this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 675 mass ave cambridge ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 15 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141902.274594435@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 294 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|