aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/crypto/ccp
AgeCommit message (Collapse)Author
2020-08-21crypto: ccp - Fix use of merged scatterlistsJohn Allen
commit 8a302808c60d441d9884cb00ea7f2b534f2e3ca5 upstream. Running the crypto manager self tests with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS may result in several types of errors when using the ccp-crypto driver: alg: skcipher: cbc-des3-ccp encryption failed on test vector 0; expected_error=0, actual_error=-5 ... alg: skcipher: ctr-aes-ccp decryption overran dst buffer on test vector 0 ... alg: ahash: sha224-ccp test failed (wrong result) on test vector ... These errors are the result of improper processing of scatterlists mapped for DMA. Given a scatterlist in which entries are merged as part of mapping the scatterlist for DMA, the DMA length of a merged entry will reflect the combined length of the entries that were merged. The subsequent scatterlist entry will contain DMA information for the scatterlist entry after the last merged entry, but the non-DMA information will be that of the first merged entry. The ccp driver does not take this scatterlist merging into account. To address this, add a second scatterlist pointer to track the current position in the DMA mapped representation of the scatterlist. Both the DMA representation and the original representation of the scatterlist must be tracked as while most of the driver can use just the DMA representation, scatterlist_map_and_copy() must use the original representation and expects the scatterlist pointer to be accurate to the original representation. In order to properly walk the original scatterlist, the scatterlist must be walked until the combined lengths of the entries seen is equal to the DMA length of the current entry being processed in the DMA mapped representation. Fixes: 63b945091a070 ("crypto: ccp - CCP device driver and interface support") Signed-off-by: John Allen <john.allen@amd.com> Cc: stable@vger.kernel.org Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-05crypto: ccp - Release all allocated memory if sha type is invalidNavid Emamdoost
[ Upstream commit 128c66429247add5128c03dc1e144ca56f05a4e2 ] Release all allocated memory if sha type is invalid: In ccp_run_sha_cmd, if the type of sha is invalid, the allocated hmac_buf should be released. v2: fix the goto. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-20crypto: ccp -- don't "select" CONFIG_DMADEVICESArnd Bergmann
[ Upstream commit eebac678556d6927f09a992872f4464cf3aecc76 ] DMADEVICES is the top-level option for the slave DMA subsystem, and should not be selected by device drivers, as this can cause circular dependencies such as: drivers/net/ethernet/freescale/Kconfig:6:error: recursive dependency detected! drivers/net/ethernet/freescale/Kconfig:6: symbol NET_VENDOR_FREESCALE depends on PPC_BESTCOMM drivers/dma/bestcomm/Kconfig:6: symbol PPC_BESTCOMM depends on DMADEVICES drivers/dma/Kconfig:6: symbol DMADEVICES is selected by CRYPTO_DEV_SP_CCP drivers/crypto/ccp/Kconfig:10: symbol CRYPTO_DEV_SP_CCP depends on CRYPTO crypto/Kconfig:16: symbol CRYPTO is selected by LIBCRC32C lib/Kconfig:222: symbol LIBCRC32C is selected by LIQUIDIO drivers/net/ethernet/cavium/Kconfig:65: symbol LIQUIDIO depends on PTP_1588_CLOCK drivers/ptp/Kconfig:8: symbol PTP_1588_CLOCK is implied by FEC drivers/net/ethernet/freescale/Kconfig:23: symbol FEC depends on NET_VENDOR_FREESCALE The LIQUIDIO driver causing this problem is addressed in a separate patch, but this change is needed to prevent it from happening again. Using "depends on DMADEVICES" is what we do for all other implementations of slave DMA controllers as well. Fixes: b3c2fee5d66b ("crypto: ccp - Ensure all dependencies are specified") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-14crypto: ccp - set max RSA modulus size for v3 platform devices as wellArd Biesheuvel
commit 11548f5a5747813ff84bed6f2ea01100053b0d8d upstream. AMD Seattle incorporates a non-PCI version of the v3 CCP crypto accelerator, and this version was left behind when the maximum RSA modulus size was parameterized in order to support v5 hardware which supports larger moduli than v3 hardware does. Due to this oversight, RSA acceleration no longer works at all on these systems. Fix this by setting the .rsamax property to the appropriate value for v3 platform hardware. Fixes: e28c190db66830c0 ("csrypto: ccp - Expand RSA support for a v5 ccp") Cc: Gary R Hook <gary.hook@amd.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-27crypto: ccp - Reduce maximum stack usageArnd Bergmann
[ Upstream commit 72c8117adfced37df101c8c0b3f363e0906f83f0 ] Each of the operations in ccp_run_cmd() needs several hundred bytes of kernel stack. Depending on the inlining, these may need separate stack slots that add up to more than the warning limit, as shown in this clang based build: drivers/crypto/ccp/ccp-ops.c:871:12: error: stack frame size of 1164 bytes in function 'ccp_run_aes_cmd' [-Werror,-Wframe-larger-than=] static int ccp_run_aes_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) The problem may also happen when there is no warning, e.g. in the ccp_run_cmd()->ccp_run_aes_cmd()->ccp_run_aes_gcm_cmd() call chain with over 2000 bytes. Mark each individual function as 'noinline_for_stack' to prevent this from happening, and move the calls to the two special cases for aes into the top-level function. This will keep the actual combined stack usage to the mimimum: 828 bytes for ccp_run_aes_gcm_cmd() and at most 524 bytes for each of the other cases. Fixes: 63b945091a07 ("crypto: ccp - CCP device driver and interface support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27crypto: ccp - Fix 3DES complaint from ccp-crypto moduleHook, Gary
[ Upstream commit 89646fdda4cae203185444ac7988835f36a21ee1 ] Crypto self-tests reveal an error: alg: skcipher: cbc-des3-ccp encryption test failed (wrong output IV) on test vector 0, cfg="in-place" The offset value should not be recomputed when retrieving the context. Also, a code path exists which makes decisions based on older (version 3) hardware; a v3 device deosn't support 3DES so remove this check. Fixes: 990672d48515 ('crypto: ccp - Enable 3DES function on v5 CCPs') Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27crypto: ccp - fix AES CFB error exposed by new test vectorsHook, Gary
[ Upstream commit c3b359d6567c0b8f413e924feb37cf025067d55a ] Updated testmgr will exhibit this error message when loading the ccp-crypto module: alg: skcipher: cfb-aes-ccp encryption failed with err -22 on test vector 3, cfg="in-place" Update the CCP crypto driver to correctly treat CFB as a streaming mode cipher (instead of block mode). Update the configuration for CFB to specify the block size as a single byte; Fixes: 2b789435d7f3 ('crypto: ccp - CCP AES crypto API support') Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17crypto: ccp - fix uninitialized list headMark Salter
commit 691505a803a7f223b2af621848d581259c61f77d upstream. A NULL-pointer dereference was reported in fedora bz#1762199 while reshaping a raid6 array after adding a fifth drive to an existing array. [ 47.343549] md/raid:md0: raid level 6 active with 3 out of 5 devices, algorithm 2 [ 47.804017] md0: detected capacity change from 0 to 7885289422848 [ 47.822083] Unable to handle kernel read from unreadable memory at virtual address 0000000000000000 ... [ 47.940477] CPU: 1 PID: 14210 Comm: md0_raid6 Tainted: G W 5.2.18-200.fc30.aarch64 #1 [ 47.949594] Hardware name: AMD Overdrive/Supercharger/To be filled by O.E.M., BIOS ROD1002C 04/08/2016 [ 47.958886] pstate: 00400085 (nzcv daIf +PAN -UAO) [ 47.963668] pc : __list_del_entry_valid+0x2c/0xa8 [ 47.968366] lr : ccp_tx_submit+0x84/0x168 [ccp] [ 47.972882] sp : ffff00001369b970 [ 47.976184] x29: ffff00001369b970 x28: ffff00001369bdb8 [ 47.981483] x27: 00000000ffffffff x26: ffff8003b758af70 [ 47.986782] x25: ffff8003b758b2d8 x24: ffff8003e6245818 [ 47.992080] x23: 0000000000000000 x22: ffff8003e62450c0 [ 47.997379] x21: ffff8003dfd6add8 x20: 0000000000000003 [ 48.002678] x19: ffff8003e6245100 x18: 0000000000000000 [ 48.007976] x17: 0000000000000000 x16: 0000000000000000 [ 48.013274] x15: 0000000000000000 x14: 0000000000000000 [ 48.018572] x13: ffff7e000ef83a00 x12: 0000000000000001 [ 48.023870] x11: ffff000010eff998 x10: 00000000000019a0 [ 48.029169] x9 : 0000000000000000 x8 : ffff8003e6245180 [ 48.034467] x7 : 0000000000000000 x6 : 000000000000003f [ 48.039766] x5 : 0000000000000040 x4 : ffff8003e0145080 [ 48.045064] x3 : dead000000000200 x2 : 0000000000000000 [ 48.050362] x1 : 0000000000000000 x0 : ffff8003e62450c0 [ 48.055660] Call trace: [ 48.058095] __list_del_entry_valid+0x2c/0xa8 [ 48.062442] ccp_tx_submit+0x84/0x168 [ccp] [ 48.066615] async_tx_submit+0x224/0x368 [async_tx] [ 48.071480] async_trigger_callback+0x68/0xfc [async_tx] [ 48.076784] ops_run_biofill+0x178/0x1e8 [raid456] [ 48.081566] raid_run_ops+0x248/0x818 [raid456] [ 48.086086] handle_stripe+0x864/0x1208 [raid456] [ 48.090781] handle_active_stripes.isra.0+0xb0/0x278 [raid456] [ 48.096604] raid5d+0x378/0x618 [raid456] [ 48.100602] md_thread+0xa0/0x150 [ 48.103905] kthread+0x104/0x130 [ 48.107122] ret_from_fork+0x10/0x18 [ 48.110686] Code: d2804003 f2fbd5a3 eb03003f 54000320 (f9400021) [ 48.116766] ---[ end trace 23f390a527f7ad77 ]--- ccp_tx_submit is passed a dma_async_tx_descriptor which is contained in a ccp_dma_desc and adds it to a ccp channel's pending list: list_del(&desc->entry); list_add_tail(&desc->entry, &chan->pending); The problem is that desc->entry may be uninitialized in the async_trigger_callback path where the descriptor was gotten from ccp_prep_dma_interrupt which got it from ccp_alloc_dma_desc which doesn't initialize the desc->entry list head. So, just initialize the list head to avoid the problem. Cc: <stable@vger.kernel.org> Reported-by: Sahaj Sarup <sahajsarup@gmail.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-06crypto: ccp - Ignore unconfigured CCP device on suspend/resumeGary R Hook
commit 5871cd93692c8071fb9358daccb715b5081316ac upstream. If a CCP is unconfigured (e.g. there are no available queues) then there will be no data structures allocated for the device. Thus, we must check for validity of a pointer before trying to access structure members. Fixes: 720419f01832f ("crypto: ccp - Introduce the AMD Secure Processor device") Cc: <stable@vger.kernel.org> Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16crypto: ccp - Add support for valid authsize values less than 16Gary R Hook
commit 9f00baf74e4b6f79a3a3dfab44fb7bb2e797b551 upstream. AES GCM encryption allows for authsize values of 4, 8, and 12-16 bytes. Validate the requested authsize, and retain it to save in the request context. Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: <stable@vger.kernel.org> Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16crypto: ccp - Validate buffer lengths for copy operationsGary R Hook
commit b698a9f4c5c52317db486b069190c7e3d2b97e7e upstream. The CCP driver copies data between scatter/gather lists and DMA buffers. The length of the requested copy operation must be checked against the available destination buffer length. Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16crypto: ccp - Ignore tag length when decrypting GCM ciphertextGary R Hook
commit e2664ecbb2f26225ac6646876f2899558ffb2604 upstream. AES GCM input buffers for decryption contain AAD+CTEXT+TAG. Only decrypt the ciphertext, and use the tag for comparison. Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: <stable@vger.kernel.org> Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16crypto: ccp - Fix oops by properly managing allocated structuresGary R Hook
commit 25e44338321af545ab34243a6081c3f0fc6107d0 upstream. A plaintext or ciphertext length of 0 is allowed in AES, in which case no encryption occurs. Ensure that we don't clean up data structures that were never allocated. Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: <stable@vger.kernel.org> Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-31crypto: ccp/gcm - use const time tag comparison.Cfir Cohen
commit 538a5a072e6ef04377b180ee9b3ce5bae0a85da4 upstream. Avoid leaking GCM tag through timing side channel. Fixes: 36cf515b9bbe ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Cfir Cohen <cfir@google.com> Acked-by: Gary R Hook <ghook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-31crypto: ccp - memset structure fields to zero before reuseHook, Gary
commit 20e833dc36355ed642d00067641a679c618303fa upstream. The AES GCM function reuses an 'op' data structure, which members contain values that must be cleared for each (re)use. This fix resolves a crypto self-test failure: alg: aead: gcm-aes-ccp encryption test failed (wrong result) on test vector 2, cfg="two even aligned splits" Fixes: 36cf515b9bbe ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: <stable@vger.kernel.org> Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-31crypto: ccp - Validate the the error value used to index error messagesHook, Gary
commit 52393d617af7b554f03531e6756facf2ea687d2e upstream. The error code read from the queue status register is only 6 bits wide, but we need to verify its value is within range before indexing the error messages. Fixes: 81422badb3907 ("crypto: ccp - Make syslog errors human-readable") Cc: <stable@vger.kernel.org> Reported-by: Cfir Cohen <cfir@google.com> Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-25crypto: ccp - don't disable interrupts while setting up debugfsSebastian Andrzej Siewior
[ Upstream commit 79eb382b5e06a6dca5806465d7195d686a463ab0 ] I don't why we need take a single write lock and disable interrupts while setting up debugfs. This is what what happens when we try anyway: |ccp 0000:03:00.2: enabling device (0000 -> 0002) |BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:69 |in_atomic(): 1, irqs_disabled(): 1, pid: 3, name: kworker/0:0 |irq event stamp: 17150 |hardirqs last enabled at (17149): [<0000000097a18c49>] restore_regs_and_return_to_kernel+0x0/0x23 |hardirqs last disabled at (17150): [<000000000773b3a9>] _raw_write_lock_irqsave+0x1b/0x50 |softirqs last enabled at (17148): [<0000000064d56155>] __do_softirq+0x3b8/0x4c1 |softirqs last disabled at (17125): [<0000000092633c18>] irq_exit+0xb1/0xc0 |CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.16.0-rc2+ #30 |Workqueue: events work_for_cpu_fn |Call Trace: | dump_stack+0x7d/0xb6 | ___might_sleep+0x1eb/0x250 | down_write+0x17/0x60 | start_creating+0x4c/0xe0 | debugfs_create_dir+0x9/0x100 | ccp5_debugfs_setup+0x191/0x1b0 | ccp5_init+0x8a7/0x8c0 | ccp_dev_init+0xb8/0xe0 | sp_init+0x6c/0x90 | sp_pci_probe+0x26e/0x590 | local_pci_probe+0x3f/0x90 | work_for_cpu_fn+0x11/0x20 | process_one_work+0x1ff/0x650 | worker_thread+0x1d4/0x3a0 | kthread+0xfe/0x130 | ret_from_fork+0x27/0x50 If any locking is required, a simple mutex will do it. Cc: Gary R Hook <gary.hook@amd.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-08crypto: ccp - return an actual key size from RSA max_size callbackMaciej S. Szmigiero
commit 0a9eb80e643064266868bd2fb2cd608e669309b0 upstream. rsa-pkcs1pad uses a value returned from a RSA implementation max_size callback as a size of an input buffer passed to the RSA implementation for encrypt and sign operations. CCP RSA implementation uses a hardware input buffer which size depends only on the current RSA key length, so it should return this key length in the max_size callback, too. This also matches what the kernel software RSA implementation does. Previously, the value returned from this callback was always the maximum RSA key size the CCP hardware supports. This resulted in this huge buffer being passed by rsa-pkcs1pad to CCP even for smaller key sizes and then in a buffer overflow when ccp_run_rsa_cmd() tried to copy this large input buffer into a RSA key length-sized hardware input buffer. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Fixes: ceeec0afd684 ("crypto: ccp - Add support for RSA on the CCP") Cc: stable@vger.kernel.org Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-07Merge tag 'dmaengine-4.14-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This one features the usual updates to the drivers and one good part of removing DA_SG from core as it has no users. Summary: - Remove DMA_SG support as we have no users for this feature - New driver for Altera / Intel mSGDMA IP core - Support for memset in dmatest and qcom_hidma driver - Update for non cyclic mode in k3dma, bunch of update in bam_dma, bcm sba-raid - Constify device ids across drivers" * tag 'dmaengine-4.14-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (52 commits) dmaengine: sun6i: support V3s SoC variant dmaengine: sun6i: make gate bit in sun8i's DMA engines a common quirk dmaengine: rcar-dmac: document R8A77970 bindings dmaengine: xilinx_dma: Fix error code format specifier dmaengine: altera: Use macros instead of structs to describe the registers dmaengine: ti-dma-crossbar: Fix dra7 reserve function dmaengine: pl330: constify amba_id dmaengine: pl08x: constify amba_id dmaengine: bcm-sba-raid: Remove redundant SBA_REQUEST_STATE_COMPLETED dmaengine: bcm-sba-raid: Explicitly ACK mailbox message after sending dmaengine: bcm-sba-raid: Add debugfs support dmaengine: bcm-sba-raid: Remove redundant SBA_REQUEST_STATE_RECEIVED dmaengine: bcm-sba-raid: Re-factor sba_process_deferred_requests() dmaengine: bcm-sba-raid: Pre-ack async tx descriptor dmaengine: bcm-sba-raid: Peek mbox when we have no free requests dmaengine: bcm-sba-raid: Alloc resources before registering DMA device dmaengine: bcm-sba-raid: Improve sba_issue_pending() run duration dmaengine: bcm-sba-raid: Increase number of free sba_request dmaengine: bcm-sba-raid: Allow arbitrary number free sba_request dmaengine: bcm-sba-raid: Remove reqs_free_count from sba_device ...
2017-08-22dmaengine: remove DMA_SG as it is dead code in kernelDave Jiang
There are no in kernel consumers for DMA_SG op. Removing operation, dead code, and test code in dmatest. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Gary Hook <gary.hook@amd.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Kedareswara rao Appana <appana.durga.rao@xilinx.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-08-17crypto: ccp - use dma_mapping_error to check map errorPan Bian
The return value of dma_map_single() should be checked by dma_mapping_error(). However, in function ccp_init_dm_workarea(), its return value is checked against NULL, which could result in failures. Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-08-09crypto: ccp - select CONFIG_CRYPTO_RSAArnd Bergmann
Without the base RSA code, we run into a link error: ERROR: "rsa_parse_pub_key" [drivers/crypto/ccp/ccp-crypto.ko] undefined! ERROR: "rsa_parse_priv_key" [drivers/crypto/ccp/ccp-crypto.ko] undefined! Like the other drivers implementing RSA in hardware, this can be avoided by always enabling the base support when we build CCP. Fixes: ceeec0afd684 ("crypto: ccp - Add support for RSA on the CCP") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-08-09crypto: ccp - avoid uninitialized variable warningArnd Bergmann
The added support for version 5 CCPs introduced a false-positive warning in the RSA implementation: drivers/crypto/ccp/ccp-ops.c: In function 'ccp_run_rsa_cmd': drivers/crypto/ccp/ccp-ops.c:1856:3: error: 'sb_count' may be used uninitialized in this function [-Werror=maybe-uninitialized] This changes the code in a way that should make it easier for the compiler to track the state of the sb_count variable, and avoid the warning. Fixes: 6ba46c7d4d7e ("crypto: ccp - Fix base RSA function for version 5 CCPs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-08-04crypto: ccp - Add XTS-AES-256 support for CCP version 5Gary R Hook
Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-08-04crypto: ccp - Rework the unit-size check for XTS-AESGary R Hook
The CCP supports a limited set of unit-size values. Change the check for this parameter such that acceptable values match the enumeration. Then clarify the conditions under which we must use the fallback implementation. Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-08-04crypto: ccp - Add a call to xts_check_key()Gary R Hook
Vet the key using the available standard function Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-08-04crypto: ccp - Fix XTS-AES-128 support on v5 CCPsGary R Hook
Version 5 CCPs have some new requirements for XTS-AES: the type field must be specified, and the key requires 512 bits, with each part occupying 256 bits and padded with zeroes. cc: <stable@vger.kernel.org> # 4.9.x+ Signed-off-by: Gary R Hook <ghook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-08-03crypto: ccp - remove duplicate module version and author entryBrijesh Singh
commit 720419f01832 ("crypto: ccp - Introduce the AMD Secure Processor device") moved the module registeration from ccp-dev.c to sp-dev.c but patch missed removing the module version and author entry from ccp-dev.c. It causes the below warning during boot when CONFIG_CRYPTO_DEV_SP_CCP=y and CONFIG_CRYPTO_DEV_CCP_CRYPTO=y is set. [ 0.187825] sysfs: cannot create duplicate filename '/module/ccp/version' [ 0.187825] sysfs: cannot create duplicate filename '/module/ccp/version' Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gary R Hook <gary.hook@amd.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-28csrypto: ccp - Expand RSA support for a v5 ccpGary R Hook
A version 5 CCP can handle an RSA modulus up to 16k bits. Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-28crypto: ccp - Add support for RSA on the CCPGary R Hook
Wire up the CCP as an RSA cipher provider. Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-28crypto: ccp - Fix base RSA function for version 5 CCPsGary R Hook
Version 5 devices have requirements for buffer lengths, as well as parameter format (e.g. bits vs. bytes). Fix the base CCP driver code to meet requirements all supported versions. Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-28crypto: ccp - Update copyright dates for 2017.Gary R Hook
Some updates this year have not had copyright dates changed in modified files. Correct this for 2017. Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-18crypto: ccp - remove ccp_present() check from device initializeBrijesh Singh
Since SP device driver supports multiples devices (e.g CCP, PSP), we should not fail the driver init just because CCP device is not found. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-18crypto: ccp - rename ccp driver initialize files as sp deviceBrijesh Singh
CCP device initializes is now integerated into higher level SP device, to avoid the confusion lets rename the ccp driver initialization files (ccp-platform.c->sp-platform.c, ccp-pci.c->sp-pci.c). The patch does not make any functional changes other than renaming file and structures Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-18crypto: ccp - Abstract interrupt registerationBrijesh Singh
The CCP and PSP devices part of AMD Secure Procesor may share the same interrupt. Hence we expand the SP device to register a common interrupt handler and provide functions to CCP and PSP devices to register their interrupt callback which will be invoked upon interrupt. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-18crypto: ccp - Introduce the AMD Secure Processor deviceBrijesh Singh
The CCP device is part of the AMD Secure Processor. In order to expand the usage of the AMD Secure Processor, create a framework that allows functional components of the AMD Secure Processor to be initialized and handled appropriately. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-18crypto: ccp - Use devres interface to allocate PCI/iomap and cleanupBrijesh Singh
Update pci and platform files to use devres interface to allocate the PCI and iomap resources. Also add helper functions to consolicate module init, exit and power mangagement code duplication. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-18crypto: ccp - print error message on platform_get_irq failureGustavo A. R. Silva
Print error message on platform_get_irq failure before return. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-18crypto: ccp - Provide an error path for debugfs setup failureGary R Hook
Changes since v2: - On failure remove only the DebugFS heirarchy for this device Changes since v1: - Remove unneeded local variable Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-18crypto: ccp - Change all references to use the JOB ID macroGary R Hook
Use the CCP_NEW_JOBID() macro when assigning an identifier Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-18crypto: ccp - Fix some line spacingGary R Hook
Add/remove blank lines as appropriate. Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-22crypto: ccp - Release locks before returningGary R Hook
krobot warning: make sure that all error return paths release locks. Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19crypto: ccp - return NULL instead of 0pjambhlekar
This change is to handle sparse warning. Return type of function is a pointer to the structure and it returns 0. Instead it should return NULL. Signed-off-by: Pushkar Jambhlekar <pushkar.iit@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-19crypto: ccp - Add debugfs entries for CCP informationGary R Hook
Expose some data about the configuration and operation of the CCP through debugfs entries: device name, capabilities, configuration, statistics. Allow the user to reset the counters to zero by writing (any value) to the 'stats' file. This can be done per queue or per device. Changes from V1: - Correct polarity of test when destroying devices at module unload Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-05-23crypto: ccp - Use IPAD/OPAD constantCorentin LABBE
This patch simply replace all occurrence of HMAC IPAD/OPAD value by their define. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-05-18crypto: ccp - Add a module authorGary R Hook
CC: <stable@vger.kernel.org> # 4.9.x+ Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-24crypto: ccp - Change ISR handler method for a v5 CCPGary R Hook
The CCP has the ability to perform several operations simultaneously, but only one interrupt. When implemented as a PCI device and using MSI-X/MSI interrupts, use a tasklet model to service interrupts. By disabling and enabling interrupts from the CCP, coupled with the queuing that tasklets provide, we can ensure that all events (occurring on the device) are recognized and serviced. This change fixes a problem wherein 2 or more busy queues can cause notification bits to change state while a (CCP) interrupt is being serviced, but after the queue state has been evaluated. This results in the event being 'lost' and the queue hanging, waiting to be serviced. Since the status bits are never fully de-asserted, the CCP never generates another interrupt (all bits zero -> one or more bits one), and no further CCP operations will be executed. Cc: <stable@vger.kernel.org> # 4.9.x+ Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-24crypto: ccp - Change ISR handler method for a v3 CCPGary R Hook
The CCP has the ability to perform several operations simultaneously, but only one interrupt. When implemented as a PCI device and using MSI-X/MSI interrupts, use a tasklet model to service interrupts. By disabling and enabling interrupts from the CCP, coupled with the queuing that tasklets provide, we can ensure that all events (occurring on the device) are recognized and serviced. This change fixes a problem wherein 2 or more busy queues can cause notification bits to change state while a (CCP) interrupt is being serviced, but after the queue state has been evaluated. This results in the event being 'lost' and the queue hanging, waiting to be serviced. Since the status bits are never fully de-asserted, the CCP never generates another interrupt (all bits zero -> one or more bits one), and no further CCP operations will be executed. Cc: <stable@vger.kernel.org> # 4.9.x+ Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-21crypto: ccp - Disable interrupts early on unloadGary R Hook
Ensure that we disable interrupts first when shutting down the driver. Cc: <stable@vger.kernel.org> # 4.9.x+ Signed-off-by: Gary R Hook <ghook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>