aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/block/zram/zram_drv.c
AgeCommit message (Collapse)Author
2019-05-21Merge branch 'v4.18/standard/base' into v4.18/standard/preempt-rt/baseBruce Ashfield
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2019-05-15zram: pass down the bvec we need to read into in the work structJérôme Glisse
commit e153abc0739ff77bd89c9ba1688cdb963464af97 upstream. When scheduling work item to read page we need to pass down the proper bvec struct which points to the page to read into. Before this patch it uses a randomly initialized bvec (only if PAGE_SIZE != 4096) which is wrong. Note that without this patch on arch/kernel where PAGE_SIZE != 4096 userspace could read random memory through a zram block device (thought userspace probably would have no control on the address being read). Link: http://lkml.kernel.org/r/20190408183219.26377-1-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2019-03-07Merge branch 'v4.18/standard/base' into v4.18/standard/preempt-rt/baseBruce Ashfield
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
2019-03-01zram: fix lockdep warning of free block handlingMinchan Kim
commit 3c9959e025472122a61faebb208525cf26b305d1 upstream. Patch series "zram idle page writeback", v3. Inherently, swap device has many idle pages which are rare touched since it was allocated. It is never problem if we use storage device as swap. However, it's just waste for zram-swap. This patchset supports zram idle page writeback feature. * Admin can define what is idle page "no access since X time ago" * Admin can define when zram should writeback them * Admin can define when zram should stop writeback to prevent wearout Details are in each patch's description. This patch (of 7): ================================ WARNING: inconsistent lock state 4.19.0+ #390 Not tainted -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. zram_verify/2095 [HC0[0]:SC1[1]:HE1:SE0] takes: 00000000b1828693 (&(&zram->bitmap_lock)->rlock){+.?.}, at: put_entry_bdev+0x1e/0x50 {SOFTIRQ-ON-W} state was registered at: _raw_spin_lock+0x2c/0x40 zram_make_request+0x755/0xdc9 generic_make_request+0x373/0x6a0 submit_bio+0x6c/0x140 __swap_writepage+0x3a8/0x480 shrink_page_list+0x1102/0x1a60 shrink_inactive_list+0x21b/0x3f0 shrink_node_memcg.constprop.99+0x4f8/0x7e0 shrink_node+0x7d/0x2f0 do_try_to_free_pages+0xe0/0x300 try_to_free_pages+0x116/0x2b0 __alloc_pages_slowpath+0x3f4/0xf80 __alloc_pages_nodemask+0x2a2/0x2f0 __handle_mm_fault+0x42e/0xb50 handle_mm_fault+0x55/0xb0 __do_page_fault+0x235/0x4b0 page_fault+0x1e/0x30 irq event stamp: 228412 hardirqs last enabled at (228412): [<ffffffff98245846>] __slab_free+0x3e6/0x600 hardirqs last disabled at (228411): [<ffffffff98245625>] __slab_free+0x1c5/0x600 softirqs last enabled at (228396): [<ffffffff98e0031e>] __do_softirq+0x31e/0x427 softirqs last disabled at (228403): [<ffffffff98072051>] irq_exit+0xd1/0xe0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&zram->bitmap_lock)->rlock); <Interrupt> lock(&(&zram->bitmap_lock)->rlock); *** DEADLOCK *** no locks held by zram_verify/2095. stack backtrace: CPU: 5 PID: 2095 Comm: zram_verify Not tainted 4.19.0+ #390 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: <IRQ> dump_stack+0x67/0x9b print_usage_bug+0x1bd/0x1d3 mark_lock+0x4aa/0x540 __lock_acquire+0x51d/0x1300 lock_acquire+0x90/0x180 _raw_spin_lock+0x2c/0x40 put_entry_bdev+0x1e/0x50 zram_free_page+0xf6/0x110 zram_slot_free_notify+0x42/0xa0 end_swap_bio_read+0x5b/0x170 blk_update_request+0x8f/0x340 scsi_end_request+0x2c/0x1e0 scsi_io_completion+0x98/0x650 blk_done_softirq+0x9e/0xd0 __do_softirq+0xcc/0x427 irq_exit+0xd1/0xe0 do_IRQ+0x93/0x120 common_interrupt+0xf/0xf </IRQ> With writeback feature, zram_slot_free_notify could be called in softirq context by end_swap_bio_read. However, bitmap_lock is not aware of that so lockdep yell out: get_entry_bdev spin_lock(bitmap->lock); irq softirq end_swap_bio_read zram_slot_free_notify zram_slot_lock <-- deadlock prone zram_free_page put_entry_bdev spin_lock(bitmap->lock); <-- deadlock prone With akpm's suggestion (i.e. bitmap operation is already atomic), we could remove bitmap lock. It might fail to find a empty slot if serious contention happens. However, it's not severe problem because huge page writeback has already possiblity to fail if there is severe memory pressure. Worst case is just keeping the incompressible in memory, not storage. The other problem is zram_slot_lock in zram_slot_slot_free_notify. To make it safe is this patch introduces zram_slot_trylock where zram_slot_free_notify uses it. Although it's rare to be contented, this patch adds new debug stat "miss_free" to keep monitoring how often it happens. Link: http://lkml.kernel.org/r/20181127055429.251614-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2019-01-21Merge branch 'v4.18/standard/base' into v4.18/standard/preempt-rt/baseBruce Ashfield
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2019-01-14zram: fix double free backing deviceMinchan Kim
commit 5547932dc67a48713eece4fa4703bfdf0cfcb818 upstream. If blkdev_get fails, we shouldn't do blkdev_put. Otherwise, kernel emits below log. This patch fixes it. WARNING: CPU: 0 PID: 1893 at fs/block_dev.c:1828 blkdev_put+0x105/0x120 Modules linked in: CPU: 0 PID: 1893 Comm: swapoff Not tainted 4.19.0+ #453 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 RIP: 0010:blkdev_put+0x105/0x120 Call Trace: __x64_sys_swapoff+0x46d/0x490 do_syscall_64+0x5a/0x190 entry_SYSCALL_64_after_hwframe+0x49/0xbe irq event stamp: 4466 hardirqs last enabled at (4465): __free_pages_ok+0x1e3/0x490 hardirqs last disabled at (4466): trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (3420): __do_softirq+0x333/0x446 softirqs last disabled at (3407): irq_exit+0xd1/0xe0 Link: http://lkml.kernel.org/r/20181127055429.251614-3-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com> Cc: <stable@vger.kernel.org> [4.14+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2018-11-22Merge branch 'v4.18/standard/base' into v4.18/standard/preempt-rt/baseBruce Ashfield
2018-11-21zram: close udev startup race condition as default groupsMinchan Kim
commit fef912bf860e upstream. commit 98af4d4df889 upstream. I got a report from Howard Chen that he saw zram and sysfs race(ie, zram block device file is created but sysfs for it isn't yet) when he tried to create new zram devices via hotadd knob. v4.20 kernel fixes it by [1, 2] but it's too large size to merge into -stable so this patch fixes the problem by registering defualt group by Greg KH's approach[3]. This patch should be applied to every stable tree [3.16+] currently existing from kernel.org because the problem was introduced at 2.6.37 by [4]. [1] fef912bf860e, block: genhd: add 'groups' argument to device_add_disk [2] 98af4d4df889, zram: register default groups with device_add_disk() [3] http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/ [4] 33863c21e69e9, Staging: zram: Replace ioctls with sysfs interface Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Hannes Reinecke <hare@suse.com> Tested-by: Howard Chen <howardsoc@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-09-11Merge branch 'v4.18/standard/base' into v4.18/standard/preempt-rt/baseBruce Ashfield
2018-09-09drivers/block/zram/zram_drv.c: fix bug storing backing_devPeter Kalauskas
commit c8bd134a4bddafe5917d163eea73873932c15e83 upstream. The call to strlcpy in backing_dev_store is incorrect. It should take the size of the destination buffer instead of the size of the source buffer. Additionally, ignore the newline character (\n) when reading the new file_name buffer. This makes it possible to set the backing_dev as follows: echo /dev/sdX > /sys/block/zram0/backing_dev The reason it worked before was the fact that strlcpy() copies 'len - 1' bytes, which is strlen(buf) - 1 in our case, so it accidentally didn't copy the trailing new line symbol. Which also means that "echo -n /dev/sdX" most likely was broken. Signed-off-by: Peter Kalauskas <peskal@google.com> Link: http://lkml.kernel.org/r/20180813061623.GC64836@rodete-desktop-imager.corp.google.com Acked-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> [4.14+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-22drivers/zram: Don't disable preemption in zcomp_stream_get/put()Mike Galbraith
In v4.7, the driver switched to percpu compression streams, disabling preemption via get/put_cpu_ptr(). Use a per-zcomp_strm lock here. We also have to fix an lock order issue in zram_decompress_page() such that zs_map_object() nests inside of zcomp_stream_put() as it does in zram_bvec_write(). Signed-off-by: Mike Galbraith <umgwanakikbuti@gmail.com> [bigeasy: get_locked_var() -> per zcomp_strm lock] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2018-08-22drivers/block/zram: Replace bit spinlocks with rtmutex for -rtMike Galbraith
They're nondeterministic, and lead to ___might_sleep() splats in -rt. OTOH, they're a lot less wasteful than an rtmutex per page. Signed-off-by: Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2018-08-10zram: remove BD_CAP_SYNCHRONOUS_IO with writeback featureMinchan Kim
If zram supports writeback feature, it's no longer a BD_CAP_SYNCHRONOUS_IO device beause zram does asynchronous IO operations for incompressible pages. Do not pretend to be synchronous IO device. It makes the system very sluggish due to waiting for IO completion from upper layers. Furthermore, it causes a user-after-free problem because swap thinks the opearion is done when the IO functions returns so it can free the page (e.g., lock_page_or_retry and goto out_release in do_swap_page) but in fact, IO is asynchronous so the driver could access a just freed page afterward. This patch fixes the problem. BUG: Bad page state in process qemu-system-x86 pfn:3dfab21 page:ffffdfb137eac840 count:0 mapcount:0 mapping:0000000000000000 index:0x1 flags: 0x17fffc000000008(uptodate) raw: 017fffc000000008 dead000000000100 dead000000000200 0000000000000000 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_PREP flag set bad because of flags: 0x8(uptodate) CPU: 4 PID: 1039 Comm: qemu-system-x86 Tainted: G B 4.18.0-rc5+ #1 Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0b 05/02/2017 Call Trace: dump_stack+0x5c/0x7b bad_page+0xba/0x120 get_page_from_freelist+0x1016/0x1250 __alloc_pages_nodemask+0xfa/0x250 alloc_pages_vma+0x7c/0x1c0 do_swap_page+0x347/0x920 __handle_mm_fault+0x7b4/0x1110 handle_mm_fault+0xfc/0x1f0 __get_user_pages+0x12f/0x690 get_user_pages_unlocked+0x148/0x1f0 __gfn_to_pfn_memslot+0xff/0x3c0 [kvm] try_async_pf+0x87/0x230 [kvm] tdp_page_fault+0x132/0x290 [kvm] kvm_mmu_page_fault+0x74/0x570 [kvm] kvm_arch_vcpu_ioctl_run+0x9b3/0x1990 [kvm] kvm_vcpu_ioctl+0x388/0x5d0 [kvm] do_vfs_ioctl+0xa2/0x630 ksys_ioctl+0x70/0x80 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x55/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Link: https://lore.kernel.org/lkml/0516ae2d-b0fd-92c5-aa92-112ba7bd32fc@contabo.de/ Link: http://lkml.kernel.org/r/20180802051112.86174-1-minchan@kernel.org [minchan@kernel.org: fix changelog, add comment] Link: https://lore.kernel.org/lkml/0516ae2d-b0fd-92c5-aa92-112ba7bd32fc@contabo.de/ Link: http://lkml.kernel.org/r/20180802051112.86174-1-minchan@kernel.org Link: http://lkml.kernel.org/r/20180805233722.217347-1-minchan@kernel.org [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Tino Lehnig <tino.lehnig@contabo.de> Tested-by: Tino Lehnig <tino.lehnig@contabo.de> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> [4.15+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-07zram: introduce zram memory trackingMinchan Kim
zRam as swap is useful for small memory device. However, swap means those pages on zram are mostly cold pages due to VM's LRU algorithm. Especially, once init data for application are touched for launching, they tend to be not accessed any more and finally swapped out. zRAM can store such cold pages as compressed form but it's pointless to keep in memory. Better idea is app developers free them directly rather than remaining them on heap. This patch tell us last access time of each block of zram via "cat /sys/kernel/debug/zram/zram0/block_state". The output is as follows, 300 75.033841 .wh 301 63.806904 s.. 302 63.806919 ..h First column is zram's block index and 3rh one represents symbol (s: same page w: written page to backing store h: huge page) of the block state. Second column represents usec time unit of the block was last accessed. So above example means the 300th block is accessed at 75.033851 second and it was huge so it was written to the backing store. Admin can leverage this information to catch cold|incompressible pages of process with *pagemap* once part of heaps are swapped out. I used the feature a few years ago to find memory hoggers in userspace to notify them what memory they have wasted without touch for a long time. With it, they could reduce unnecessary memory space. However, at that time, I hacked up zram for the feature but now I need the feature again so I decided it would be better to upstream rather than keeping it alone. I hope I submit the userspace tool to use the feature soon. [akpm@linux-foundation.org: fix i386 printk warning] [minchan@kernel.org: use ktime_get_boottime() instead of sched_clock()] Link: http://lkml.kernel.org/r/20180420063525.GA253739@rodete-desktop-imager.corp.google.com [akpm@linux-foundation.org: documentation tweak] [akpm@linux-foundation.org: fix i386 printk warning] [minchan@kernel.org: fix compile warning] Link: http://lkml.kernel.org/r/20180508104849.GA8209@rodete-desktop-imager.corp.google.com [rdunlap@infradead.org: fix printk formats] Link: http://lkml.kernel.org/r/3652ccb1-96ef-0b0b-05d1-f661d7733dcc@infradead.org Link: http://lkml.kernel.org/r/20180416090946.63057-5-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-07zram: record accessed secondMinchan Kim
zRam as swap is useful for small memory device. However, swap means those pages on zram are mostly cold pages due to VM's LRU algorithm. Especially, once init data for application are touched for launching, they tend to be not accessed any more and finally swapped out. zRAM can store such cold pages as compressed form but it's pointless to keep in memory. Better idea is app developers free them directly rather than remaining them on heap. This patch records last access time of each block of zram so that With upcoming zram memory tracking, it could help userspace developers to reduce memory footprint. Link: http://lkml.kernel.org/r/20180416090946.63057-4-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-07zram: mark incompressible page as ZRAM_HUGEMinchan Kim
Mark incompressible pages so that we could investigate who is the owner of the incompressible pages once the page is swapped out via using upcoming zram memory tracker feature. With it, we could prevent such pages to be swapped out by using mlock. Otherwise we might remove them. This patch exposes new stat for huge pages via mm_stat. Link: http://lkml.kernel.org/r/20180416090946.63057-3-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-07zram: correct flag name of ZRAM_ACCESSMinchan Kim
Patch series "zram memory tracking", v5. zRam as swap is useful for small memory device. However, swap means those pages on zram are mostly cold pages due to VM's LRU algorithm. Especially, once init data for application are touched for launching, they tend to be not accessed any more and finally swapped out. zRAM can store such cold pages as compressed form but it's pointless to keep in memory. As well, it's pointless to store incompressible pages to zram so better idea is app developers manages them directly like free or mlock rather than remaining them on heap. This patch provides a debugfs /sys/kernel/debug/zram/zram0/block_state to represent each block's state so admin can investigate what memory is cold|incompressible|same page with using pagemap once the pages are swapped out. The output is as follows: 300 75.033841 .wh 301 63.806904 s.. 302 63.806919 ..h First column is zram's block index and 3rh one represents symbol (s: same page w: written page to backing store h: huge page) of the block state. Second column represents usec time unit of the block was last accessed. So above example means the 300th block is accessed at 75.033851 second and it was huge so it was written to the backing store. This patch (of 4): ZRAM_ACCESS is used for locking a slot of zram so correct the name. It is also not a common flag to indicate status of the block so move the declare position on top of the flag. Lastly, let's move the function to the top of source code to be able to use it easily without forward declaration. Link: http://lkml.kernel.org/r/20180416090946.63057-2-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge updates from Andrew Morton: - a few misc things - ocfs2 updates - the v9fs maintainers have been missing for a long time. I've taken over v9fs patch slinging. - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (116 commits) mm,oom_reaper: check for MMF_OOM_SKIP before complaining mm/ksm: fix interaction with THP mm/memblock.c: cast constant ULLONG_MAX to phys_addr_t headers: untangle kmemleak.h from mm.h include/linux/mmdebug.h: make VM_WARN* non-rvals mm/page_isolation.c: make start_isolate_page_range() fail if already isolated mm: change return type to vm_fault_t mm, oom: remove 3% bonus for CAP_SYS_ADMIN processes mm, page_alloc: wakeup kcompactd even if kswapd cannot free more memory kernel/fork.c: detect early free of a live mm mm: make counting of list_lru_one::nr_items lockless mm/swap_state.c: make bool enable_vma_readahead and swap_vma_readahead() static block_invalidatepage(): only release page if the full page was invalidated mm: kernel-doc: add missing parameter descriptions mm/swap.c: remove @cold parameter description for release_pages() mm/nommu: remove description of alloc_vm_area zram: drop max_zpage_size and use zs_huge_class_size() zsmalloc: introduce zs_huge_class_size() mm: fix races between swapoff and flush dcache fs/direct-io.c: minor cleanups in do_blockdev_direct_IO ...
2018-04-05zram: drop max_zpage_size and use zs_huge_class_size()Sergey Senozhatsky
Remove ZRAM's enforced "huge object" value and use zsmalloc huge-class watermark instead, which makes more sense. TEST - I used a 1G zram device, LZO compression back-end, original data set size was 444MB. Looking at zsmalloc classes stats the test ended up to be pretty fair. BASE ZRAM/ZSMALLOC ===================== zram mm_stat 498978816 191482495 199831552 0 199831552 15634 0 zsmalloc classes class size almost_full almost_empty obj_allocated obj_used pages_used pages_per_zspage freeable ... 151 2448 0 0 1240 1240 744 3 0 168 2720 0 0 4200 4200 2800 2 0 190 3072 0 0 10100 10100 7575 3 0 202 3264 0 0 380 380 304 4 0 254 4096 0 0 10620 10620 10620 1 0 Total 7 46 106982 106187 48787 0 PATCHED ZRAM/ZSMALLOC ===================== zram mm_stat 498978816 182579184 194248704 0 194248704 15628 0 zsmalloc classes class size almost_full almost_empty obj_allocated obj_used pages_used pages_per_zspage freeable ... 151 2448 0 0 1240 1240 744 3 0 168 2720 0 0 4200 4200 2800 2 0 190 3072 0 0 10100 10100 7575 3 0 202 3264 0 0 7180 7180 5744 4 0 254 4096 0 0 3820 3820 3820 1 0 Total 8 45 106959 106193 47424 0 As we can see, we reduced the number of objects stored in class-4096, because a huge number of objects which we previously forcibly stored in class-4096 now stored in non-huge class-3264. This results in lower memory consumption: - zsmalloc now uses 47424 physical pages, which is less than 48787 pages zsmalloc used before. - objects that we store in class-3264 share zspages. That's why overall the number of pages that both class-4096 and class-3264 consumed went down from 10924 to 9564. [sergey.senozhatsky.work@gmail.com: add pool param to zs_huge_class_size()] Link: http://lkml.kernel.org/r/20180314081833.1096-3-sergey.senozhatsky@gmail.com Link: http://lkml.kernel.org/r/20180306070639.7389-3-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-08block: Use blk_queue_flag_*() in drivers instead of queue_flag_*()Bart Van Assche
This patch has been generated as follows: for verb in set_unlocked clear_unlocked set clear; do replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \ $(git grep -lw queue_flag_${verb} drivers block/bsg*) done Except for protecting all queue flag changes with the queue lock this patch does not change any functionality. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-28zram: Delete gendisk before cleaning up the request queueBart Van Assche
Remove the disk, partition and bdi sysfs attributes before cleaning up the request queue associated with the disk. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-06block: convert to bio_first_bvec_all & bio_first_page_allMing Lei
This patch converts to bio_first_bvec_all() & bio_first_page_all() for retrieving the 1st bvec/page, and prepares for supporting multipage bvec. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-15drivers/block/zram/zram_drv.c: make zram_page_end_io() staticColin Ian King
zram_page_end_io() is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'zram_page_end_io' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20171016173336.20320-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15bdi: introduce BDI_CAP_SYNCHRONOUS_IOMinchan Kim
As discussed at https://lkml.kernel.org/r/<20170728165604.10455-1-ross.zwisler@linux.intel.com> someday we will remove rw_page(). If so, we need something to detect such super-fast storage on which synchronous IO operations like the current rw_page are always a win. Introduces BDI_CAP_SYNCHRONOUS_IO to indicate such devices. With it, we could use various optimization techniques. Link: http://lkml.kernel.org/r/1505886205-9671-3-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15zram: set BDI_CAP_STABLE_WRITES onceMinchan Kim
With fast swap storage, the platform wants to use swap more aggressively and swap-in is crucial to application latency. The rw_page() based synchronous devices like zram, pmem and btt are such fast storage. When I profile swapin performance with zram lz4 decompress test, S/W overhead is more than 70%. Maybe, it would be bigger in nvdimm. This patchset reduces swap-in latency by skipping swapcache if the swap device is a synchronous device like a rw_page() based device. It enhances by 45% my swapin test (5G sequential swapin, no readahead) from 2.41sec to 1.64sec. This patch (of 4): Commit 19b7ccf8651d ("block: get rid of blk_integrity_revalidate()") fixed a weird thing (i.e., reset BDI_CAP_STABLE_WRITES flag unconditionally whenever revalidat_disk is called) so zram doesn't need to reset the flag any more when revalidating the bdev. Instead, set the flag just once when the zram device is created. It shouldn't change any behavior. Link: http://lkml.kernel.org/r/1505886205-9671-2-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hugh Dickins <hughd@google.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03zram: fix null dereference of handleMinchan Kim
In testing I found handle passed to zs_map_object in __zram_bvec_read is NULL so eh kernel goes oops in pin_object(). The reason is there is no routine to check the slot's freeing after getting the slot's lock. This patch fixes it. [minchan@kernel.org: v2] Link: http://lkml.kernel.org/r/1505887347-10881-1-git-send-email-minchan@kernel.org Link: http://lkml.kernel.org/r/1505788488-26723-1-git-send-email-minchan@kernel.org Fixes: 1f7319c74275 ("zram: partial IO refactoring") Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08drivers/block/zram/zram_drv.c: convert to using memset_lMatthew Wilcox
zram was the motivation for creating memset_l(). Minchan Kim sees a 7% performance improvement on x86 with 100MB of non-zero deduplicatable data: perf stat -r 10 dd if=/dev/zram0 of=/dev/null vanilla: 0.232050465 seconds time elapsed ( +- 0.51% ) memset_l: 0.217219387 seconds time elapsed ( +- 0.07% ) Link: http://lkml.kernel.org/r/20170720184539.31609-7-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Tested-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07Merge branch 'for-4.14/block' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer updates from Jens Axboe: "This is the first pull request for 4.14, containing most of the code changes. It's a quiet series this round, which I think we needed after the churn of the last few series. This contains: - Fix for a registration race in loop, from Anton Volkov. - Overflow complaint fix from Arnd for DAC960. - Series of drbd changes from the usual suspects. - Conversion of the stec/skd driver to blk-mq. From Bart. - A few BFQ improvements/fixes from Paolo. - CFQ improvement from Ritesh, allowing idling for group idle. - A few fixes found by Dan's smatch, courtesy of Dan. - A warning fixup for a race between changing the IO scheduler and device remova. From David Jeffery. - A few nbd fixes from Josef. - Support for cgroup info in blktrace, from Shaohua. - Also from Shaohua, new features in the null_blk driver to allow it to actually hold data, among other things. - Various corner cases and error handling fixes from Weiping Zhang. - Improvements to the IO stats tracking for blk-mq from me. Can drastically improve performance for fast devices and/or big machines. - Series from Christoph removing bi_bdev as being needed for IO submission, in preparation for nvme multipathing code. - Series from Bart, including various cleanups and fixes for switch fall through case complaints" * 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits) kernfs: checking for IS_ERR() instead of NULL drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set drbd: Fix allyesconfig build, fix recent commit drbd: switch from kmalloc() to kmalloc_array() drbd: abort drbd_start_resync if there is no connection drbd: move global variables to drbd namespace and make some static drbd: rename "usermode_helper" to "drbd_usermode_helper" drbd: fix race between handshake and admin disconnect/down drbd: fix potential deadlock when trying to detach during handshake drbd: A single dot should be put into a sequence. drbd: fix rmmod cleanup, remove _all_ debugfs entries drbd: Use setup_timer() instead of init_timer() to simplify the code. drbd: fix potential get_ldev/put_ldev refcount imbalance during attach drbd: new disk-option disable-write-same drbd: Fix resource role for newly created resources in events2 drbd: mark symbols static where possible drbd: Send P_NEG_ACK upon write error in protocol != C drbd: add explicit plugging when submitting batches drbd: change list_for_each_safe to while(list_first_entry_or_null) drbd: introduce drbd_recv_header_maybe_unplug ...
2017-09-06block, THP: make block_device_operations.rw_page support THPHuang Ying
The .rw_page in struct block_device_operations is used by the swap subsystem to read/write the page contents from/into the corresponding swap slot in the swap device. To support the THP (Transparent Huge Page) swap optimization, the .rw_page is enhanced to support to read/write THP if possible. Link: http://lkml.kernel.org/r/20170724051840.2309-6-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c] Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vishal L Verma <vishal.l.verma@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06zram: read page from backing deviceMinchan Kim
This patch enables read IO from backing device. For the feature, it implements two IO read functions to transfer data from backing storage. One is asynchronous IO function and other is synchronous one. A reason I need synchrnous IO is due to partial write which need to complete read IO before the overwriting partial data. We can make the partial IO's case asynchronous, too but at the moment, I don't feel adding more complexity to support such rare use cases so want to go with simple. [xieyisheng1@huawei.com: read_from_bdev_async(): return 1 to avoid call page_endio() in zram_rw_page()] Link: http://lkml.kernel.org/r/1502707447-6944-1-git-send-email-xieyisheng1@huawei.com Link: http://lkml.kernel.org/r/1498459987-24562-9-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Cc: Juneho Choi <juno.choi@lge.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06zram: write incompressible pages to backing deviceMinchan Kim
This patch enables write IO to transfer data to backing device. For that, it implements write_to_bdev function which creates new bio and chaining with parent bio to make the parent bio asynchrnous. For rw_page which don't have parent bio, it submit owned bio and handle IO completion by zram_page_end_io. Also, this patch defines new flag ZRAM_WB to mark written page for later read IO. [xieyisheng1@huawei.com: fix typo in comment] Link: http://lkml.kernel.org/r/1502707447-6944-2-git-send-email-xieyisheng1@huawei.com Link: http://lkml.kernel.org/r/1498459987-24562-8-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Cc: Juneho Choi <juno.choi@lge.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06zram: identify asynchronous IO's return valueMinchan Kim
For upcoming asynchronous IO like writeback, zram_rw_page should be aware of that whether requested IO was completed or submitted successfully, otherwise error. For the goal, zram_bvec_rw has three return values. -errno: returns error number 0: IO request is done synchronously 1: IO request is issued successfully. Link: http://lkml.kernel.org/r/1498459987-24562-7-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06zram: add free space management in backing deviceMinchan Kim
With backing device, zram needs management of free space of backing device. This patch adds bitmap logic to manage free space which is very naive. However, it would be simple enough as considering uncompressible pages's frequenty in zram. Link: http://lkml.kernel.org/r/1498459987-24562-6-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06zram: add interface to specif backing deviceMinchan Kim
For writeback feature, user should set up backing device before the zram working. This patch enables the interface via /sys/block/zramX/backing_dev. Currently, it supports block device only but it could be enhanced for file as well. Link: http://lkml.kernel.org/r/1498459987-24562-5-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06zram: rename zram_decompress_page to __zram_bvec_readMinchan Kim
zram_decompress_page naming is not proper because it doesn't decompress if page was dedup hit or stored with compression. Use more abstract term and consistent with write path function __zram_bvec_write. Link: http://lkml.kernel.org/r/1498459987-24562-4-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06zram: inline zram_compressMinchan Kim
zram_compress does several things, compress, entry alloc and check limitation. I did for just readbility but it hurts modulization.:( So this patch removes zram_compress functions and inline it in __zram_bvec_write for upcoming patches. Link: http://lkml.kernel.org/r/1498459987-24562-3-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06zram: clean up duplicated codes in __zram_bvec_writeMinchan Kim
Patch series "writeback incompressible pages to storage", v1. zRam is useful for memory saving with compressible pages but sometime, workload can be changed and system has lots of incompressible pages which is very harmful for zram. This patch supports writeback feature of zram so admin can set up a block device and with it, zram can save the memory via writing out the incompressile pages once it found it's incompressible pages (1/4 comp ratio) instead of keeping the page in memory. [1-3] is just clean up and [4-8] is step by step feature enablement. [4-8] is logically not bisectable(ie, logical unit separation) although I tried to compiled out without breaking but I think it would be better to review. This patch (of 9): __zram_bvec_write has some of duplicated logic for zram meta data handling of same_page|compressed_page. This patch aims to clean it up without behavior change. [xieyisheng1@huawei.com: fix compr_data_size stat] Link: http://lkml.kernel.org/r/1502707447-6944-1-git-send-email-xieyisheng1@huawei.com Link: http://lkml.kernel.org/r/1496019048-27016-1-git-send-email-minchan@kernel.org Link: http://lkml.kernel.org/r/1498459987-24562-2-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Juneho Choi <juno.choi@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-10zram: rework copy of compressor name in comp_algorithm_store()Matthias Kaehlcke
comp_algorithm_store() passes the size of the source buffer to strlcpy() instead of the destination buffer size. Make it explicit that the two buffers have the same size and use strcpy() instead of strlcpy(). The latter can be done safely since the function ensures that the string in the source buffer is terminated. Link: http://lkml.kernel.org/r/20170803163350.45245-1-mka@chromium.org Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-09block: pass in queue to inflight accountingJens Axboe
No functional change in this patch, just in preparation for basing the inflight mechanism on the queue in question. Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-10zram: constify attribute_group structures.Arvind Yadav
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 8293 841 4 9138 23b2 drivers/block/zram/zram_drv.o File size After adding 'const': text data bss dec hex filename 8357 777 4 9138 23b2 drivers/block/zram/zram_drv.o Link: http://lkml.kernel.org/r/65680c1c4d85818f7094cbfa31c91bf28185ba1b.1499061182.git.arvind.yadav.cs@gmail.com Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06zram: count same page write as page_storedMinchan Kim
Regardless of whether it is same page or not, it's surely write and stored to zram so we should increase pages_stored stat. Otherwise, user can see zero value via mm_stats although he writes a lot of pages to zram. Link: http://lkml.kernel.org/r/1494834068-27004-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-13zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()Greg Kroah-Hartman
I missed converting the last zram attribute to CLASS_ATTR_RO() after removing CLASS_ATTR() from the kernel, causing a build breakage. This patch fixes that problem. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09zram: use class_groups instead of class_attrsGreg Kroah-Hartman
The class_attrs pointer is long depreciated, and is about to be finally removed, so move to use the class_groups pointer instead. Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-03zram: reduce load operation in page_same_filledSangwoo Park
In page_same_filled function, all elements in the page is compared with next index value. The current comparison routine compares the (i)th and (i+1)th values of the page. In this case, two load operaions occur for each comparison. But if we store first value of the page stores at 'val' variable and using it to compare with others, the load opearation is reduced. It reduce load operation per page by up to 64times. Link: http://lkml.kernel.org/r/1488428104-7257-1-git-send-email-sangwoo2.park@lge.com Signed-off-by: Sangwoo Park <sangwoo2.park@lge.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03zram: use zram_free_page instead of open-codedMinchan Kim
The zram_free_page already handles NULL handle case and same page so use it to reduce error probability. (Acutaully, I made a mistake when I handled same page feature) Link: http://lkml.kernel.org/r/1492052365-16169-7-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03zram: introduce zram data accessorMinchan Kim
With element, sometime I got confused handle and element access. It might be my bad but I think it's time to introduce accessor to prevent future idiot like me. This patch is just clean-up patch so it shouldn't change any behavior. Link: http://lkml.kernel.org/r/1492052365-16169-6-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03zram: remove zram_meta structureMinchan Kim
It's redundant now. Instead, remove it and use zram structure directly. Link: http://lkml.kernel.org/r/1492052365-16169-5-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03zram: use zram_slot_lock instead of raw bit_spin_lock opMinchan Kim
With this clean-up phase, I want to use zram's wrapper function to lock table access which is more consistent with other zram's functions. Link: http://lkml.kernel.org/r/1492052365-16169-4-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03zram: partial IO refactoringMinchan Kim
For architecture(PAGE_SIZE > 4K), zram have supported partial IO. However, the mixed code for handling normal/partial IO is too mess, error-prone to modify IO handler functions with upcoming feature so this patch aims for cleaning up zram's IO handling functions. Link: http://lkml.kernel.org/r/1492052365-16169-3-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-03 13:32:08 +0000