| Age | Commit message (Collapse) | Author |
|---|
|
We want the fixes in here.
|
|
We want these fixes in here as well.
|
|
This patch provides two new runtime PM helper functions which intend to
be used from system suspend/resume callbacks, to make sure devices are
put into low power state during system suspend and brought back to full
power at system resume.
The prerequisite is to have all levels of a device's runtime PM
callbacks to be defined through the SET_PM_RUNTIME_PM_OPS macro, which
means these are available for CONFIG_PM.
By using the new runtime PM helper functions especially the two
scenarios below will be addressed.
1) The PM core prevents .runtime_suspend callbacks from being invoked
during system suspend. That means even for a runtime PM centric
subsystem and driver, the device needs to be put into low power state
from a system suspend callback. Otherwise it may very well be left in
full power state (runtime resumed) while the system is suspended. By
using the new helper functions, we make sure to walk the hierarchy of
a device's power domain, subsystem and driver.
2) Subsystems and drivers need to cope with all the combinations of
CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME. The two new helper functions
smothly addresses this.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
While fetching the proper runtime PM callback, we walk the hierarchy of
device's power domains, subsystems and drivers.
This is common for rpm_suspend(), rpm_idle() and rpm_resume(). Let's
clean up the code by using a macro that handles this.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If devices don't provide latency data, this warning can be quite noisy until
the pm domain was enabled and disabled a few times. Turn this warning into
a debug message.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
During restore, pm_notifier chain are called with
PM_RESTORE_PREPARE. The firmware_class driver handler
fw_pm_notify does not have a handler for this. As a result,
it keeps a reader on the kmod.c umhelper_sem. During
freeze_processes, the call to __usermodehelper_disable tries to
take a write lock on this semaphore and hangs waiting.
Signed-off-by: Sebastian Capella <sebastian.capella@linaro.org>
Acked-by: Ming Lei <ming.lei@canonical.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since we now have an internal version of regmap_multi_reg_write use this
to apply the register patch.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
Devices with more complex boot proceedures may occasionally apply the
register patch manual. regmap_multi_reg_write is a logical way to do so,
however the patch must be applied with cache bypass on, such that it
doesn't override any user settings. This patch adds a
regmap_multi_reg_write_bypassed function that applies a set of writes
with the bypass enabled.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
There should be no need for the writes supplied to this function to be
edited by it so mark them as const.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
We want these fixes here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
/drivers/base/regmap/regmap.c:717:6-33: WARNING:
Comparison to bool.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Nenghua Cao <nhcao@marvell.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
Currently, we check the registers in the patch are aligned to the
register stride everytime we sync the cache and the first time the patch
is written out is unchecked.
This patch checks the register patch when we first register it so the
first writes are no longer unchecked and then doesn't check on
subsequent syncs as the patch will be unchanged.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
|
|
Since sometimes the 'config' parameter has no use, it should be NULL.
And make the code simplifier.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
In analogy with commits 5af84b82701a and 97df8c12995, using
asynchronous threads can improve the overall suspend_late
time significantly.
This patch is for suspend_late phase.
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In analogy with commits 5af84b82701a and 97df8c12995, using
asynchronous threads can improve the overall suspend_noirq
time significantly.
This patch is for suspend_noirq phase.
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In analogy with commits 5af84b82701a and 97df8c12995, using
asynchronous threads can improve the overall resume_early
time significantly.
This patch is for resume_early phase.
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In analogy with commits 5af84b82701a and 97df8c12995, using
asynchronous threads can improve the overall resume_noirq time
significantly.
One typical case is:
In resume_noirq phase and for the PCI devices, the function
pci_pm_resume_noirq() will be called, and there is one d3_delay
(10ms) at least.
With the way of asynchronous threads, we just need wait d3_delay
time once in parallel for each calling, which saves much time to
resume quickly.
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The patch is a helper adding two new flags for implementing
async threads for suspend_noirq and suspend_late.
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This patch fix spelling typo in Documentation/DocBook.
It is because .html and .xml files are generated by make htmldocs,
I have to fix a typo within the source files.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The x86 CPU feature modalias handling existed before it was reimplemented
generically. This patch aligns the x86 handling so that it
(a) reuses some more code that is now generic;
(b) uses the generic format for the modalias module metadata entry, i.e., it
now uses 'cpu:type:x86,venVVVVfamFFFFmodMMMM:feature:,XXXX,YYYY' instead of
the 'x86cpu:vendor:VVVV:family:FFFF:model:MMMM:feature:,XXXX,YYYY' that was
used before.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds support for advertising optional CPU features over udev
using the modalias, and for declaring compatibility with/dependency upon
such a feature in a module.
The mapping between feature numbers and actual features should be provided
by the architecture in a file called <asm/cpufeature.h> which exports the
following functions/macros:
- cpu_feature(FEAT), a preprocessor macro that maps token FEAT to a
numeric index;
- bool cpu_have_feature(n), returning whether this CPU has support for
feature #n;
- MAX_CPU_FEATURES, an upper bound for 'n' in the previous function.
The feature can then be enabled by setting CONFIG_GENERIC_CPU_AUTOPROBE
for the architecture.
For instance, a module that registers its module init function using
module_cpu_feature_match(FEAT_X, module_init_function)
will be probed automatically when the CPU's support for the 'FEAT_X'
feature is advertised over udev, and will only allow the module to be
loaded by hand if the 'FEAT_X' feature is supported.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want those fixes here for testing and development.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the fixes here for future mei and other patches.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf
Pull dma-buf fix from Sumit Semwal:
"Just some debugfs output updates.
There's another patch related to dma-buf, but it'll get upstreamed via
Greg KH's pull request"
* tag 'dma-buf-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf:
dma-buf: update debugfs output
|
|
Create special function regmap_attach_dev
which can be called separately out of regmap_init.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
SPMI states that a slave may contain two register spaces, the Base
register space is a 5-bit byte-addressable space accessed via the
Register Read/Write and Register Zero Write command sequences, and the
Extended register space: a 16-bit byte-addressable space accessed via
the Extended Read/Write and Extended Read/Write Long command sequences.
Provide support for accessing both of these spaces, taking advantage of
the more bandwidth-efficient commands ('Register 0 Write' vs 'Register
Write', and 'Extended Register Read/Write' vs 'Extended Register
Read/Write Long') when possible.
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Function create_syslog_header() is defined as static, so it should
not be exported.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow the scheduler to select the most appropriate CPU for running the
firmware load timeout routine and delayed routine for firmware unload.
This extends idle residency times and conserves power.
This functionality is enabled when CONFIG_WQ_POWER_EFFICIENT is selected.
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shaibal Dutta <shaibal.dutta@broadcom.com>
[zoran.markovic@linaro.org: Rebased to latest kernel, added commit message.
Fixed code alignment.]
Signed-off-by: Zoran Markovic <zoran.markovic@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
so, we need give a protection and return a error value.
[ 7341.474236] [drm:do_intel_finish_page_flip] *ERROR* invalid or inactive unpin_work!
[ 7341.494464] atomisp-css2400b0_v21 0000:00:03.0: unhandled css stored event: 0x20
[ 7341.503627] vmap allocation for size 208896 failed: use vmalloc=<size> to increase size.<=================== map failed
[ 7341.507135] [drm:do_intel_finish_page_flip] *ERROR* invalid or inactive unpin_work!
[ 7341.503848] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 7341.520394] IP: [<c18f5c1b>] sst_load_all_modules_elf+0x1bb/0x850
[ 7341.527216] *pdpt = 0000000030dfe001 *pde = 0000000000000000
[ 7341.533640] Oops: 0000 [#1] PREEMPT SMP
[ 7341.540360] [drm:do_intel_finish_page_flip] *ERROR* invalid or inactive unpin_work!
[ 7341.538037] Modules linked in: atomisp_css2400b0_v21 lm3554 ov2722 imx1x5 atmel_mxt_ts vxd392 videobuf_vmalloc videobuf_core lm_dump(O) bcm_bt_lpm hdmi_audio bcm4334x(O)
[ 7341.563531] CPU: 1 PID: 525 Comm: mediaserver Tainted: G W O 3.10.20-262518-ga83c053 #1
[ 7341.573253] task: f0994ec0 ti: f09f0000 task.ti: f09f0000
[ 7341.579284] EIP: 0060:[<c18f5c1b>] EFLAGS: 00010246 CPU: 1
[ 7341.585415] EIP is at sst_load_all_modules_elf+0x1bb/0x850
[ 7341.591541] EAX: 00000000 EBX: e3595ba0 ECX: 00000000 EDX: 00031c1c
[ 7341.598541] ESI: e04a0000 EDI: 00000000 EBP: f09f1d80 ESP: f09f1cf4
[ 7341.605542] DS: 007b ES: 007b FS: 00d8 GS: 003b SS: 0068
[ 7341.611573] CR0: 80050033 CR2: 00000000 CR3: 30db4000 CR4: 001007f0
[ 7341.618573] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 7341.625575] DR6: ffff0ff0 DR7: 00000400
[ 7341.629856] Stack:
[ 7341.632097] f09f1d57 00000019 c1d656d7 c1d658d3 c1d56409 00000f28 c1d64af9 18000103
[ 7341.640766] 01000001 00080000 c1f910a0 f326f4c8 00000034 f326f520 00000002 e04a02bc
[ 7341.649465] 00000001 f326e014 c1f910b0 e04a0000 c0080100 00031c1c e3595ba0 c0080100
[ 7341.658149] Call Trace:
[ 7341.660888] [<c18f6308>] sst_post_download_byt+0x58/0xb0
[ 7341.666925] [<c18f4fbc>] sst_load_fw+0xdc/0x510
[ 7341.672086] [<c1a7b2c0>] ? __mutex_lock_slowpath+0x250/0x370
[ 7341.678507] [<c1a80e05>] ? sub_preempt_count+0x55/0xe0
[ 7341.684346] [<c18f1294>] sst_download_fw+0x14/0x60
[ 7341.689796] [<c1a7b403>] ? mutex_lock+0x23/0x30
[ 7341.694954] [<c18f191c>] intel_sst_check_device+0x6c/0x120
[ 7341.701181] [<c18f1d08>] sst_set_generic_params+0x1b8/0x4a0
[ 7341.707504] [<c1a80e05>] ? sub_preempt_count+0x55/0xe0
[ 7341.713341] [<c1a80e05>] ? sub_preempt_count+0x55/0xe0
[ 7341.719178] [<c1a7b2c0>] ? __mutex_lock_slowpath+0x250/0x370
[ 7341.725600] [<c1320d84>] ? __kmalloc_track_caller+0xe4/0x1d0
[ 7341.732022] [<c18e35f5>] sst_set_mixer_param+0x25/0x40
[ 7341.737859] [<c18e3853>] lpe_mixer_ihf_set+0xb3/0x160
[ 7341.743602] [<c1855b99>] snd_ctl_ioctl+0xa89/0xb40
[ 7341.749052] [<c1331e65>] ? path_openat+0xa5/0x3d0
[ 7341.754409] [<c1447857>] ? avc_has_perm_flags+0xc7/0x170
[ 7341.760441] [<c1855110>] ? snd_ctl_elem_add_user+0x540/0x540
[ 7341.766862] [<c1334047>] do_vfs_ioctl+0x77/0x5e0
[ 7341.772117] [<c144842a>] ? inode_has_perm.isra.42.constprop.79+0x3a/0x50
[ 7341.779705] [<c14490a0>] ? file_has_perm+0xa0/0xb0
[ 7341.785155] [<c14493b8>] ? selinux_file_ioctl+0x48/0xe0
[ 7341.791090] [<c1334628>] SyS_ioctl+0x78/0x90
[ 7341.795958] [<c1a7dde8>] syscall_call+0x7/0xb
[ 7341.800925] [<c1a70000>] ? mm_fault_error+0x13c/0x198
Signed-off-by: zhang jun <jun.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>. Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The acpi_dev_pm_attach/_detach functions perform their own checks to
ensure the device has an ACPI companion. It is not necessary for the
caller to do so.
This mirrors what other busses with ACPI dev PM support do (i2c, spi,
sdio).
Cc: Len Brown <lenb@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Russell King observed 'wierd' looking output from debugfs, and also suggested
better ways of getting device names (use KBUILD_MODNAME, dev_name())
This patch addresses these issues to make the debugfs output correct and better
looking.
While at it, replace seq_printf with seq_puts to remove the checkpatch.pl
warnings.
Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
|
|
Check if regs are readable.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
This patch introduces "devm_kstrdup" API so that the
device's driver can allocate memory and copy string.
Signed-off-by: Manish Badarkhe <badarkhe.manish@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
Rework dev_pm_qos_add_ancestor_request() so that device PM QoS type
is passed to it as the third argument and make it support the
DEV_PM_QOS_LATENCY_TOLERANCE device PM QoS type (in addition to
DEV_PM_QOS_RESUME_LATENCY).
That will allow the drivers of devices without latency tolerance
hardware support to use their ancestors having it as proxies for
their latency tolerance requirements.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a new latency tolerance device PM QoS type to be use for
specifying active state (RPM_ACTIVE) memory access (DMA) latency
tolerance requirements for devices. It may be used to prevent
hardware from choosing overly aggressive energy-saving operation
modes (causing too much latency to appear) for the whole platform.
This feature reqiures hardware support, so it only will be
available for devices having a new .set_latency_tolerance()
callback in struct dev_pm_info populated, in which case the
routine pointed to by it should implement whatever is necessary
to transfer the effective requirement value to the hardware.
Whenever the effective latency tolerance changes for the device,
its .set_latency_tolerance() callback will be executed and the
effective value will be passed to it. If that value is negative,
which means that the list of latency tolerance requirements for
the device is empty, the callback is expected to switch the
underlying hardware latency tolerance control mechanism to an
autonomous mode if available. If that value is PM_QOS_LATENCY_ANY,
in turn, and the hardware supports a special "no requirement"
setting, the callback is expected to use it. That allows software
to prevent the hardware from automatically updating the device's
latency tolerance in response to its power state changes (e.g. during
transitions from D3cold to D0), which generally may be done in the
autonomous latency tolerance control mode.
If .set_latency_tolerance() is present for the device, a new
pm_qos_latency_tolerance_us attribute will be present in the
devivce's power directory in sysfs. Then, user space can use
that attribute to specify its latency tolerance requirement for
the device, if any. Writing "any" to it means "no requirement, but
do not let the hardware control latency tolerance" and writing
"auto" to it allows the hardware to be switched to the autonomous
mode if there are no other requirements from the kernel side in the
device's list.
This changeset includes a fix from Mika Westerberg.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a new field, no_constraints_value, to struct pm_qos_constraints
representing a list of PM QoS constraint requests to be returned by
pm_qos_get_value() when that list of requests is empty.
That field will be equal to default_value for all of the existing
global PM QoS classes and for the resume latency device PM QoS type,
but it will be different from default_value for the new latency
tolerance device PM QoS type introduced by the next changeset.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Rename symbols, variables, functions and structure fields related do
the resume latency device PM QoS type so that it is clear where they
belong (in particular, to avoid confusion with the latency tolerance
device PM QoS type introduced by a subsequent changeset).
Update the PM QoS documentation to better reflect its current state.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
We weren't handling the devres issues for the master device failing a
bind, or being unbound properly. Add a devres group to contain these,
and release the resources at the appropriate points.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All device_schedule_callback_owner() users are converted to use
device_remove_file_self(). Remove now unused
{sysfs|device}_schedule_callback_owner().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sometimes it's necessary to implement a node which wants to delete
nodes including itself. This isn't straightforward because of kernfs
active reference. While a file operation is in progress, an active
reference is held and kernfs_remove() waits for all such references to
drain before completing. For a self-deleting node, this is a deadlock
as kernfs_remove() ends up waiting for an active reference that itself
is sitting on top of.
This currently is worked around in the sysfs layer using
sysfs_schedule_callback() which makes such removals asynchronous.
While it works, it's rather cumbersome and inherently breaks
synchronicity of the operation - the file operation which triggered
the operation may complete before the removal is finished (or even
started) and the removal may fail asynchronously. If a removal
operation is immmediately followed by another operation which expects
the specific name to be available (e.g. removal followed by rename
onto the same name), there's no way to make the latter operation
reliable.
The thing is there's no inherent reason for this to be asynchrnous.
All that's necessary to do this synchronous is a dedicated operation
which drops its own active ref and deactivates self. This patch
implements kernfs_remove_self() and its wrappers in sysfs and driver
core. kernfs_remove_self() is to be called from one of the file
operations, drops the active ref the task is holding, removes the self
node, and restores active ref to the dead node so that the ref is
balanced afterwards. __kernfs_remove() is updated so that it takes an
early exit if the target node is already fully removed so that the
active ref restored by kernfs_remove_self() after removal doesn't
confuse the deactivation path.
This makes implementing self-deleting nodes very easy. The normal
removal path doesn't even need to be changed to use
kernfs_remove_self() for the self-deleting node. The method can
invoke kernfs_remove_self() on itself before proceeding the normal
removal path. kernfs_remove() invoked on the node by the normal
deletion path will simply be ignored.
This will replace sysfs_schedule_callback(). A subtle feature of
sysfs_schedule_callback() is that it collapses multiple invocations -
even if multiple removals are triggered, the removal callback is run
only once. An equivalent effect can be achieved by testing the return
value of kernfs_remove_self() - only the one which gets %true return
value should proceed with actual deletion. All other instances of
kernfs_remove_self() will wait till the enclosing kernfs operation
which invoked the winning instance of kernfs_remove_self() finishes
and then return %false. This trivially makes all users of
kernfs_remove_self() automatically show correct synchronous behavior
even when there are multiple concurrent operations - all "echo 1 >
delete" instances will finish only after the whole operation is
completed by one of the instances.
Note that manipulation of active ref is implemented in separate public
functions - kernfs_[un]break_active_protection().
kernfs_remove_self() is the only user at the moment but this will be
used to cater to more complex cases.
v2: For !CONFIG_SYSFS, dummy version kernfs_remove_self() was missing
and sysfs_remove_file_self() had incorrect return type. Fix it.
Reported by kbuild test bot.
v3: kernfs_[un]break_active_protection() separated out from
kernfs_remove_self() and exposed as public API.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dma_buf_map_attachment and dma_buf_vmap can return NULL or
ERR_PTR on a error. This encourages a common buggy pattern in
callers:
sgt = dma_buf_map_attachment(attach, DMA_BIDIRECTIONAL);
if (IS_ERR_OR_NULL(sgt))
return PTR_ERR(sgt);
This causes the caller to return 0 on an error. IS_ERR_OR_NULL
is almost always a sign of poorly-defined error handling.
This patch converts dma_buf_map_attachment to always return
ERR_PTR, and fixes the callers that incorrectly handled NULL.
There are a few more callers that were not checking for NULL
at all, which would have dereferenced a NULL pointer later.
There are also a few more callers that correctly handled NULL
and ERR_PTR differently, I left those alone but they could also
be modified to delete the NULL check.
This patch also converts dma_buf_vmap to always return NULL.
All the callers to dma_buf_vmap only check for NULL, and would
have dereferenced an ERR_PTR and panic'd if one was ever
returned. This is not consistent with the rest of the dma buf
APIs, but matches the expectations of all of the callers.
Signed-off-by: Colin Cross <ccross@android.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
irqdomain now supports removal of domains on exit so we can properly clean
up on deletion of a regmap irqchip.
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
When a map covers a single register, max_register is equal
to 0, so the "registers" & "access" files were not created.
Now they will be, as register 0 must be readable for such
map to make sense.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
regcache_sync_block_raw_flush takes the address of the base register
and the address of one past the last register to write to. "count" is
the number of registers in the range, not the number of bytes, it
should be (end addr - start addr) / stride. Without accounting for
strides greater than one, registers past the end might be synced or
the writeable_reg callback at the beginning of _regmap_raw_write will
fail and nothing will be written.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Nothing terribly exciting with regmap this release, mainly a few small
extensions to allow more devices to be supported:
- Allow the bulk I/O APIs to be used with no-bus regmaps
- Support interrupt controllers with zero ack base
- Warning and spelling fixes"
* tag 'regmap-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: fix a couple of typos
regmap: Allow regmap_bulk_write() to work for "no-bus" regmaps
regmap: Allow regmap_bulk_read() to work for "no-bus" regmaps
regmap: irq: Allow using zero value for ack_base
regmap: Fix 'ret' would return an uninitialized value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"As far as the number of commits goes, the top spot belongs to ACPI
this time with cpufreq in the second position and a handful of PM
core, PNP and cpuidle updates. They are fixes and cleanups mostly, as
usual, with a couple of new features in the mix.
The most visible change is probably that we will create struct
acpi_device objects (visible in sysfs) for all devices represented in
the ACPI tables regardless of their status and there will be a new
sysfs attribute under those objects allowing user space to check that
status via _STA.
Consequently, ACPI device eject or generally hot-removal will not
delete those objects, unless the table containing the corresponding
namespace nodes is unloaded, which is extremely rare. Also ACPI
container hotplug will be handled quite a bit differently and cpufreq
will support CPU boost ("turbo") generically and not only in the
acpi-cpufreq driver.
Specifics:
- ACPI core changes to make it create a struct acpi_device object for
every device represented in the ACPI tables during all namespace
scans regardless of the current status of that device. In
accordance with this, ACPI hotplug operations will not delete those
objects, unless the underlying ACPI tables go away.
- On top of the above, new sysfs attribute for ACPI device objects
allowing user space to check device status by triggering the
execution of _STA for its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating
the PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the
code "glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for
the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves
debug facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization
earlier. That should allow us to use ACPI during the timekeeping
initialization and possibly to simplify the EFI initialization too.
From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over
from Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in
drivers that uses _DSM to execute it via the new helper. From
Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun
Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava,
Rashika Kheria, Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support,
from Dirk Brandewie and intel_pstate documentation from Ramkumar
Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz
Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark
Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John
Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh
Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC
disabled during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf
Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente
Kurusa, Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a
cpupower tool cleanup from One Thousand Gnomes"
* tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits)
thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ
Documentation: cpufreq / boost: Update BOOST documentation
cpufreq: exynos: Extend Exynos cpufreq driver to support boost
cpufreq / boost: Kconfig: Support for software-managed BOOST
acpi-cpufreq: Adjust the code to use the common boost attribute
cpufreq: Add boost frequency support in core
intel_pstate: Add trace point to report internal state.
cpufreq: introduce cpufreq_generic_get() routine
ARM: SA1100: Create dummy clk_get_rate() to avoid build failures
cpufreq: stats: create sysfs entries when cpufreq_stats is a module
cpufreq: stats: free table and remove sysfs entry in a single routine
cpufreq: stats: remove hotplug notifiers
cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly
cpufreq: speedstep: remove unused speedstep_get_state
platform: introduce OF style 'modalias' support for platform bus
PM / tools: new tool for suspend/resume performance optimization
ACPI: fix module autoloading for ACPI enumerated devices
ACPI: add module autoloading support for ACPI enumerated devices
ACPI: fix create_modalias() return value handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
"Usual rocket science stuff from trivial.git"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
neighbour.h: fix comment
sched: Fix warning on make htmldocs caused by wait.h
slab: struct kmem_cache is protected by slab_mutex
doc: Fix typo in USB Gadget Documentation
of/Kconfig: Spelling s/one/once/
mkregtable: Fix sscanf handling
lp5523, lp8501: comment improvements
thermal: rcar: comment spelling
treewide: fix comments and printk msgs
IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart()
Documentation: update /proc/uptime field description
Documentation: Fix size parameter for snprintf
arm: fix comment header and macro name
asm-generic: uaccess: Spelling s/a ny/any/
mtd: onenand: fix comment header
doc: driver-model/platform.txt: fix a typo
drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text
doc: Fix typo (acces_process_vm -> access_process_vm)
treewide: Fix typos in printk
drivers/gpu/drm/qxl/Kconfig: reformat the help text
...
|
|
* acpi-modules:
platform: introduce OF style 'modalias' support for platform bus
ACPI: fix module autoloading for ACPI enumerated devices
ACPI: add module autoloading support for ACPI enumerated devices
ACPI: fix create_modalias() return value handling
|
Greg Kroah-Hartman
Ulf Hansson
Philipp Zabel
Sebastian Capella
Charles Keepax
Nenghua Cao
Jiri Kosina
Xiubo Li
Liu, Chuansheng
Masanari Iida
Ard Biesheuvel
Linus Torvalds
Michal Simek
Josh Cartwright
Jiang Liu
Shaibal Dutta
zhang jun
Paul Gortmaker
Sumit Semwal
Manish Badarkhe
Rafael J. Wysocki
Russell King
Tejun Heo
Colin Cross
Mark Brown
Pawel Moll
Dylan Reid