| Age | Commit message (Collapse) | Author |
|---|
|
commit 5615e74f48dcc982655543e979b6c3f3f877e6f6 upstream.
In LPAR we will only get an intercept for FC==3 for the PQAP
instruction. Running nested under z/VM can result in other intercepts as
well as ECA_APIE is an effective bit: If one hypervisor layer has
turned this bit off, the end result will be that we will get intercepts for
all function codes. Usually the first one will be a query like PQAP(QCI).
So the WARN_ON_ONCE is not right. Let us simply remove it.
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: stable@vger.kernel.org # v5.3+
Fixes: e5282de93105 ("s390: ap: kvm: add PQAP interception for AQIC")
Link: https://lore.kernel.org/kvm/20200505083515.2720-1-borntraeger@de.ibm.com
Reported-by: Qian Cai <cailca@icloud.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 86dbf32da150339ca81509fa2eb84c814b55258b upstream.
with the introduction of CPU directed interrupts the kernel
parameter pci=force_floating was introduced to fall back
to the previous behavior using floating irqs.
However we were still setting the affinity in that case,
both in __irq_alloc_descs() and via the irq_set_affinity
callback in struct irq_chip.
For the former only set the affinity in the directed case.
The latter is explicitly set in zpci_directed_irq_init()
so we can just leave it unset for the floating case.
Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts")
Co-developed-by: Alexander Schmidt <alexs@linux.ibm.com>
Signed-off-by: Alexander Schmidt <alexs@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8ebf6da9db1b2a20bb86cc1bee2552e894d03308 upstream.
Switching tracers include instruction patching. To prevent that a
instruction is patched while it's read the instruction patching is done
in stop_machine 'context'. This also means that any function called
during stop_machine must not be traced. Thus add 'notrace' to all
functions called within stop_machine.
Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls")
Fixes: 38f2c691a4b3 ("s390: improve wait logic of stop_machine")
Fixes: 4ecf0a43e729 ("processor: get rid of cpu_relax_yield")
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 316ec154810960052d4586b634156c54d0778f74 upstream.
A page table upgrade in a kernel section that uses secondary address
mode will mess up the kernel instructions as follows:
Consider the following scenario: two threads are sharing memory.
On CPU1 thread 1 does e.g. strnlen_user(). That gets to
old_fs = enable_sacf_uaccess();
len = strnlen_user_srst(src, size);
and
" la %2,0(%1)\n"
" la %3,0(%0,%1)\n"
" slgr %0,%0\n"
" sacf 256\n"
"0: srst %3,%2\n"
in strnlen_user_srst(). At that point we are in secondary space mode,
control register 1 points to kernel page table and instruction fetching
happens via c1, rather than usual c13. Interrupts are not disabled, for
obvious reasons.
On CPU2 thread 2 does MAP_FIXED mmap(), forcing the upgrade of page table
from 3-level to e.g. 4-level one. We'd allocated new top-level table,
set it up and now we hit this:
notify = 1;
spin_unlock_bh(&mm->page_table_lock);
}
if (notify)
on_each_cpu(__crst_table_upgrade, mm, 0);
OK, we need to actually change over to use of new page table and we
need that to happen in all threads that are currently running. Which
happens to include the thread 1. IPI is delivered and we have
static void __crst_table_upgrade(void *arg)
{
struct mm_struct *mm = arg;
if (current->active_mm == mm)
set_user_asce(mm);
__tlb_flush_local();
}
run on CPU1. That does
static inline void set_user_asce(struct mm_struct *mm)
{
S390_lowcore.user_asce = mm->context.asce;
OK, user page table address updated...
__ctl_load(S390_lowcore.user_asce, 1, 1);
... and control register 1 set to it.
clear_cpu_flag(CIF_ASCE_PRIMARY);
}
IPI is run in home space mode, so it's fine - insns are fetched
using c13, which always points to kernel page table. But as soon
as we return from the interrupt, previous PSW is restored, putting
CPU1 back into secondary space mode, at which point we no longer
get the kernel instructions from the kernel mapping.
The fix is to only fixup the control registers that are currently in use
for user processes during the page table update. We must also disable
interrupts in enable_sacf_uaccess to synchronize the cr and
thread.mm_segment updates against the on_each-cpu.
Fixes: 0aaba41b58bc ("s390: remove all code using the access register mode")
Cc: stable@vger.kernel.org # 4.15+
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
References: CVE-2020-11884
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 97daa028f3f621adff2c4f7b15fe0874e5b5bd6c upstream.
Return the index of the last valid slot from gfn_to_memslot_approx() if
its binary search loop yielded an out-of-bounds index. The index can
be out-of-bounds if the specified gfn is less than the base of the
lowest memslot (which is also the last valid memslot).
Note, the sole caller, kvm_s390_get_cmma(), ensures used_slots is
non-zero.
Fixes: afdad61615cc3 ("KVM: s390: Fix storage attributes migration with memory slots")
Cc: stable@vger.kernel.org # 4.19.x: 0774a964ef56: KVM: Fix out of range accesses to memslots
Cc: stable@vger.kernel.org # 4.19.x
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200408064059.8957-3-sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1493e0f944f3c319d11e067c185c904d01c17ae5 ]
We have to properly retry again by returning -EINVAL immediately in case
somebody else instantiated the table concurrently. We missed to add the
goto in this function only. The code now matches the other, similar
shadowing functions.
We are overwriting an existing region 2 table entry. All allocated pages
are added to the crst_list to be freed later, so they are not lost
forever. However, when unshadowing the region 2 table, we wouldn't trigger
unshadowing of the original shadowed region 3 table that we replaced. It
would get unshadowed when the original region 3 table is modified. As it's
not connected to the page table hierarchy anymore, it's not going to get
used anymore. However, for a limited time, this page table will stick
around, so it's in some sense a temporary memory leak.
Identified by manual code inspection. I don't think this classifies as
stable material.
Fixes: 998f637cc4b9 ("s390/mm: avoid races on region/segment/page table shadowing")
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-4-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4141b6a5e9f171325effc36a22eb92bf961e7a5c ]
When perf record -e SF_CYCLES_BASIC_DIAG runs with very high
frequency, the samples arrive faster than the perf process can
save them to file. Eventually, for longer running processes, this
leads to the siutation where the trace buffers allocated by perf
slowly fills up. At one point the auxiliary trace buffer is full
and the CPU Measurement sampling facility is turned off. Furthermore
a warning is printed to the kernel log buffer:
cpum_sf: The AUX buffer with 0 pages for the diagnostic-sampling
mode is full
The number of allocated pages for the auxiliary trace buffer is shown
as zero pages. That is wrong.
Fix this by saving the number of allocated pages before entering the
work loop in the interrupt handler. When the interrupt handler processes
the samples, it may detect the buffer full condition and stop sampling,
reducing the buffer size to zero.
Print the correct value in the error message:
cpum_sf: The AUX buffer with 256 pages for the diagnostic-sampling
mode is full
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 872f27103874a73783aeff2aac2b41a489f67d7c ]
/proc/cpuinfo should not print information about CPU 0 when it is offline.
Fixes: 281eaa8cb67c ("s390/cpuinfo: simplify locking and skip offline cpus early")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[heiko.carstens@de.ibm.com: shortened commit message]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6c7c851f1b666a8a455678a0b480b9162de86052 upstream.
Show the full diag statistic table and not just parts of it.
The issue surfaced in a KVM guest with a number of vcpus
defined smaller than NR_DIAG_STAT.
Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4d4cee96fb7a3cc53702a9be8299bf525be4ee98 upstream.
Whenever we get an -EFAULT, we failed to read in guest 2 physical
address space. Such addressing exceptions are reported via a program
intercept to the nested hypervisor.
We faked the intercept, we have to return to guest 2. Instead, right
now we would be returning -EFAULT from the intercept handler, eventually
crashing the VM.
the correct thing to do is to return 1 as rc == 1 is the internal
representation of "we have to go back into g2".
Addressing exceptions can only happen if the g2->g3 page tables
reference invalid g2 addresses (say, either a table or the final page is
not accessible - so something that basically never happens in sane
environments.
Identified by manual code inspection.
Fixes: a3508fbe9dc6 ("KVM: s390: vsie: initial support for nested virtualization")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-3-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: fix patch description]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a1d032a49522cb5368e5dfb945a85899b4c74f65 upstream.
In case we have a region 1 the following calculation
(31 + ((gmap->asce & _ASCE_TYPE_MASK) >> 2)*11)
results in 64. As shifts beyond the size are undefined the compiler is
free to use instructions like sllg. sllg will only use 6 bits of the
shift value (here 64) resulting in no shift at all. That means that ALL
addresses will be rejected.
The can result in endless loops, e.g. when prefix cannot get mapped.
Fixes: 4be130a08420 ("s390/mm: add shadow gmap support")
Tested-by: Janosch Frank <frankja@linux.ibm.com>
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-2-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: fix patch description, remove WARN_ON_ONCE]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0b38b5e1d0e2f361e418e05c179db05bb688bbd6 upstream.
When userspace executes a syscall or gets interrupted,
BEAR contains a kernel address when returning to userspace.
This make it pretty easy to figure out where the kernel is
mapped even with KASLR enabled. To fix this, add lpswe to
lowcore and always execute it there, so userspace sees only
the lowcore address of lpswe. For this we have to extend
both critical_cleanup and the SWITCH_ASYNC macro to also check
for lpswe addresses in lowcore.
Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 582b4e55403e053d8a48ff687a05174da9cc3fb0 upstream.
On s390 there currently is no implementation of pud_write(). That was ok
as long as we had our own implementation of get_user_pages_fast() which
checked for pud protection by testing the bit directly w/o using
pud_write(). The other callers of pud_write() are not reachable on s390.
After commit 1a42010cdc26 ("s390/mm: convert to the generic
get_user_pages_fast code") we use the generic get_user_pages_fast(), which
does call pud_write() in pud_access_permitted() for FOLL_WRITE access on
a large pud. Without an s390 specific pud_write(), the generic version is
called, which contains a BUG() statement to remind us that we don't have a
proper implementation. This results in a kernel panic.
Fix this by providing an implementation of pud_write().
Cc: <stable@vger.kernel.org> # 5.2+
Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code")
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit df057c914a9c219ac8b8ed22caf7da2f80c1fe26 upstream.
In the initial MIO support introduced in
commit 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions")
zpci_map_resource() and zpci_setup_resources() default to using the
mio_wb address as the resource's start address. This means users of the
mapping, which includes most drivers, will get write combining on PCI
Stores. This may lead to problems when drivers expect write through
behavior when not using an explicit ioremap_wc().
Cc: stable@vger.kernel.org
Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e9091ffd6a0aaced111b5d6ead5eaab5cd7101bc ]
As the comment says, sl->sbal holds an absolute address. qeth currently
solves this through wild casting, while zfcp doesn't care.
Handle this properly in the code that actually builds the SL.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com> [for qdio]
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 94e90f727f7424d827256023cace829cad6896f4 ]
For the same reason as commit 19514fc665ff ("arm, kbuild: make "make
install" not depend on vmlinux"), the install targets should never
trigger the rebuild of the kernel.
The variable, CONFIGURE, is not set by anyone. Remove it as well.
Link: https://lkml.kernel.org/r/20200216144829.27023-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
storage_key_init_range
commit 380324734956c64cd060e1db4304f3117ac15809 upstream.
Clang warns:
In file included from ../arch/s390/purgatory/purgatory.c:10:
In file included from ../include/linux/kexec.h:18:
In file included from ../include/linux/crash_core.h:6:
In file included from ../include/linux/elfcore.h:5:
In file included from ../include/linux/user.h:1:
In file included from ../arch/s390/include/asm/user.h:11:
../arch/s390/include/asm/page.h:45:6: warning: converting the result of
'<<' to a boolean always evaluates to false
[-Wtautological-constant-compare]
if (PAGE_DEFAULT_KEY)
^
../arch/s390/include/asm/page.h:23:44: note: expanded from macro
'PAGE_DEFAULT_KEY'
#define PAGE_DEFAULT_KEY (PAGE_DEFAULT_ACC << 4)
^
1 warning generated.
Explicitly compare this against zero to silence the warning as it is
intended to be used in a boolean context.
Fixes: de3fa841e429 ("s390/mm: fix compile for PAGE_DEFAULT_KEY != 0")
Link: https://github.com/ClangBuiltLinux/linux/issues/860
Link: https://lkml.kernel.org/r/20200214064207.10381-1-natechancellor@gmail.com
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 788d671517b5c81efbed9310ccbadb8cca86a08e upstream.
Clang warns:
../arch/s390/boot/kaslr.c:78:25: warning: passing 'char *' to parameter
of type 'const u8 *' (aka 'const unsigned char *') converts between
pointers to integer
types with different sign [-Wpointer-sign]
(char *) entropy, (char *) entropy,
^~~~~~~~~~~~~~~~
../arch/s390/include/asm/cpacf.h:280:28: note: passing argument to
parameter 'src' here
u8 *dest, const u8 *src, long src_len)
^
2 warnings generated.
Fix the cast to match what else is done in this function.
Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Link: https://github.com/ClangBuiltLinux/linux/issues/862
Link: https://lkml.kernel.org/r/20200208141052.48476-1-natechancellor@gmail.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 17cdec960cf776b20b1fb08c622221babe591d51 ]
When we try to recover a PCI function using
echo 1 > /sys/bus/pci/devices/<id>/recover
or manually with
echo 1 > /sys/bus/pci/devices/<id>/remove
echo 0 > /sys/bus/pci/slots/<slot>/power
echo 1 > /sys/bus/pci/slots/<slot>/power
clp_disable_fn() / clp_enable_fn() call clp_set_pci_fn() to first
disable and then reenable the function.
When the function is already in the requested state we may be left with
an invalid function handle.
To get a new valid handle we do a clp_list_pci() call. For this we need
both the function ID and function handle in clp_set_pci_fn() so pass the
zdev and get both.
To simplify things also pull setting the refreshed function handle into
clp_set_pci_fn()
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45f7a0da600d3c409b5ad8d5ddddacd98ddc8840 ]
Currently backtrace from ftraced function does not contain ftraced
function itself. e.g. for "path_openat":
arch_stack_walk+0x15c/0x2d8
stack_trace_save+0x50/0x68
stack_trace_call+0x15e/0x3d8
ftrace_graph_caller+0x0/0x1c <-- ftrace code
do_filp_open+0x7c/0xe8 <-- ftraced function caller
do_open_execat+0x76/0x1b8
open_exec+0x52/0x78
load_elf_binary+0x180/0x1160
search_binary_handler+0x8e/0x288
load_script+0x2a8/0x2b8
search_binary_handler+0x8e/0x288
__do_execve_file.isra.39+0x6fa/0xb40
__s390x_sys_execve+0x56/0x68
system_call+0xdc/0x2d8
Ftraced function is expected in the backtrace by ftrace kselftests, which
are now failing. It would also be nice to have it for clarity reasons.
"ftrace_caller" itself is called without stack frame allocated for it
and does not store its caller (ftraced function). Instead it simply
allocates a stack frame for "ftrace_trace_function" and sets backchain
to point to ftraced function stack frame (which contains ftraced function
caller in saved r14).
To fix this issue make "ftrace_caller" allocate a stack frame
for itself just to store ftraced function for the stack unwinder.
As a result backtrace looks like the following:
arch_stack_walk+0x15c/0x2d8
stack_trace_save+0x50/0x68
stack_trace_call+0x15e/0x3d8
ftrace_graph_caller+0x0/0x1c <-- ftrace code
path_openat+0x6/0xd60 <-- ftraced function
do_filp_open+0x7c/0xe8 <-- ftraced function caller
do_open_execat+0x76/0x1b8
open_exec+0x52/0x78
load_elf_binary+0x180/0x1160
search_binary_handler+0x8e/0x288
load_script+0x2a8/0x2b8
search_binary_handler+0x8e/0x288
__do_execve_file.isra.39+0x6fa/0xb40
__s390x_sys_execve+0x56/0x68
system_call+0xdc/0x2d8
Reported-by: Sven Schnelle <sven.schnelle@ibm.com>
Tested-by: Sven Schnelle <sven.schnelle@ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 253b3c4b2920e07ce9e2b18800b9b65245e2fafa ]
clang 10 introduces -mpacked-stack compiler option implementation. At the
same time currently it does not support a combination of -mpacked-stack
and -mbackchain. This leads to the following build error:
clang: error: unsupported option '-mpacked-stack with -mbackchain' for
target 's390x-ibm-linux'
If/when clang adds support for a combination of -mpacked-stack and
-mbackchain it would also require -msoft-float (like gcc does). According
to Ulrich Weigand "stack slot assigned to the kernel backchain overlaps
the stack slot assigned to the FPR varargs (both are required to be
placed immediately after the saved r15 slot if present)."
Extend -mpacked-stack compiler option support check to include all 3
options -mpacked-stack -mbackchain -msoft-float which must present to
support -mpacked-stack with -mbackchain.
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c611990844c28c61ca4b35ff69d3a2ae95ccd486 ]
There is no ENOTSUPP for userspace.
Reported-by: Julian Wiedmann <jwi@linux.ibm.com>
Fixes: 519783935451 ("KVM: s390: introduce ais mode modify function")
Fixes: 2c1a48f2e5ed ("KVM: S390: add new group for flic")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 576c75e36c689bec6a940e807bae27291ab0c0de ]
With zpci_disable() working, lockdep detected a potential deadlock
(lockdep output at the end).
The deadlock is between recovering a PCI function via the
/sys/bus/pci/devices/<dev>/recover
attribute vs powering it off via
/sys/bus/pci/slots/<slot>/power.
The fix is analogous to the changes in commit 0ee223b2e1f6 ("scsi: core:
Avoid that SCSI device removal through sysfs triggers a deadlock")
that fixed a potential deadlock on removing a SCSI device via sysfs.
[ 204.830107] ======================================================
[ 204.830109] WARNING: possible circular locking dependency detected
[ 204.830111] 5.5.0-rc2-06072-gbc03ecc9a672 #6 Tainted: G W
[ 204.830112] ------------------------------------------------------
[ 204.830113] bash/1034 is trying to acquire lock:
[ 204.830115] 0000000192a1a610 (kn->count#200){++++}, at: kernfs_remove_by_name_ns+0x5c/0xa8
[ 204.830122]
but task is already holding lock:
[ 204.830123] 00000000c16134a8 (pci_rescan_remove_lock){+.+.}, at: pci_stop_and_remove_bus_device_locked+0x26/0x48
[ 204.830128]
which lock already depends on the new lock.
[ 204.830129]
the existing dependency chain (in reverse order) is:
[ 204.830130]
-> #1 (pci_rescan_remove_lock){+.+.}:
[ 204.830134] validate_chain+0x93a/0xd08
[ 204.830136] __lock_acquire+0x4ae/0x9d0
[ 204.830137] lock_acquire+0x114/0x280
[ 204.830140] __mutex_lock+0xa2/0x960
[ 204.830142] mutex_lock_nested+0x32/0x40
[ 204.830145] recover_store+0x4c/0xa8
[ 204.830147] kernfs_fop_write+0xe6/0x218
[ 204.830151] vfs_write+0xb0/0x1b8
[ 204.830152] ksys_write+0x6c/0xf8
[ 204.830154] system_call+0xd8/0x2d8
[ 204.830155]
-> #0 (kn->count#200){++++}:
[ 204.830187] check_noncircular+0x1e6/0x240
[ 204.830189] check_prev_add+0xfc/0xdb0
[ 204.830190] validate_chain+0x93a/0xd08
[ 204.830192] __lock_acquire+0x4ae/0x9d0
[ 204.830193] lock_acquire+0x114/0x280
[ 204.830194] __kernfs_remove.part.0+0x2e4/0x360
[ 204.830196] kernfs_remove_by_name_ns+0x5c/0xa8
[ 204.830198] remove_files.isra.0+0x4c/0x98
[ 204.830199] sysfs_remove_group+0x66/0xc8
[ 204.830201] sysfs_remove_groups+0x46/0x68
[ 204.830204] device_remove_attrs+0x52/0x90
[ 204.830207] device_del+0x182/0x418
[ 204.830208] pci_remove_bus_device+0x8a/0x130
[ 204.830210] pci_stop_and_remove_bus_device_locked+0x3a/0x48
[ 204.830212] disable_slot+0x68/0x100
[ 204.830213] power_write_file+0x7c/0x130
[ 204.830215] kernfs_fop_write+0xe6/0x218
[ 204.830217] vfs_write+0xb0/0x1b8
[ 204.830218] ksys_write+0x6c/0xf8
[ 204.830220] system_call+0xd8/0x2d8
[ 204.830221]
other info that might help us debug this:
[ 204.830223] Possible unsafe locking scenario:
[ 204.830224] CPU0 CPU1
[ 204.830225] ---- ----
[ 204.830226] lock(pci_rescan_remove_lock);
[ 204.830227] lock(kn->count#200);
[ 204.830229] lock(pci_rescan_remove_lock);
[ 204.830231] lock(kn->count#200);
[ 204.830233]
*** DEADLOCK ***
[ 204.830234] 4 locks held by bash/1034:
[ 204.830235] #0: 00000001b6fbc498 (sb_writers#4){.+.+}, at: vfs_write+0x158/0x1b8
[ 204.830239] #1: 000000018c9f5090 (&of->mutex){+.+.}, at: kernfs_fop_write+0xaa/0x218
[ 204.830242] #2: 00000001f7da0810 (kn->count#235){.+.+}, at: kernfs_fop_write+0xb6/0x218
[ 204.830245] #3: 00000000c16134a8 (pci_rescan_remove_lock){+.+.}, at: pci_stop_and_remove_bus_device_locked+0x26/0x48
[ 204.830248]
stack backtrace:
[ 204.830250] CPU: 2 PID: 1034 Comm: bash Tainted: G W 5.5.0-rc2-06072-gbc03ecc9a672 #6
[ 204.830252] Hardware name: IBM 8561 T01 703 (LPAR)
[ 204.830253] Call Trace:
[ 204.830257] [<00000000c05e10c0>] show_stack+0x88/0xf0
[ 204.830260] [<00000000c112dca4>] dump_stack+0xa4/0xe0
[ 204.830261] [<00000000c0694c06>] check_noncircular+0x1e6/0x240
[ 204.830263] [<00000000c0695bec>] check_prev_add+0xfc/0xdb0
[ 204.830264] [<00000000c06971da>] validate_chain+0x93a/0xd08
[ 204.830266] [<00000000c06994c6>] __lock_acquire+0x4ae/0x9d0
[ 204.830267] [<00000000c069867c>] lock_acquire+0x114/0x280
[ 204.830269] [<00000000c09ca15c>] __kernfs_remove.part.0+0x2e4/0x360
[ 204.830270] [<00000000c09cb5c4>] kernfs_remove_by_name_ns+0x5c/0xa8
[ 204.830272] [<00000000c09cee14>] remove_files.isra.0+0x4c/0x98
[ 204.830274] [<00000000c09cf2ae>] sysfs_remove_group+0x66/0xc8
[ 204.830276] [<00000000c09cf356>] sysfs_remove_groups+0x46/0x68
[ 204.830278] [<00000000c0e3dfe2>] device_remove_attrs+0x52/0x90
[ 204.830280] [<00000000c0e40382>] device_del+0x182/0x418
[ 204.830281] [<00000000c0dcfd7a>] pci_remove_bus_device+0x8a/0x130
[ 204.830283] [<00000000c0dcfe92>] pci_stop_and_remove_bus_device_locked+0x3a/0x48
[ 204.830285] [<00000000c0de7190>] disable_slot+0x68/0x100
[ 204.830286] [<00000000c0de6514>] power_write_file+0x7c/0x130
[ 204.830288] [<00000000c09cc846>] kernfs_fop_write+0xe6/0x218
[ 204.830290] [<00000000c08f3480>] vfs_write+0xb0/0x1b8
[ 204.830291] [<00000000c08f378c>] ksys_write+0x6c/0xf8
[ 204.830293] [<00000000c1154374>] system_call+0xd8/0x2d8
[ 204.830294] INFO: lockdep is turned off.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0f8a206df7c920150d2aa45574fba0ab7ff6be4f upstream.
Clang warns:
In file included from ../arch/s390/boot/startup.c:3:
In file included from ../include/linux/elf.h:5:
In file included from ../arch/s390/include/asm/elf.h:132:
In file included from ../include/linux/compat.h:10:
In file included from ../include/linux/time.h:74:
In file included from ../include/linux/time32.h:13:
In file included from ../include/linux/timex.h:65:
../arch/s390/include/asm/timex.h:160:20: warning: passing 'unsigned char
[16]' to parameter of type 'char *' converts between pointers to integer
types with different sign [-Wpointer-sign]
get_tod_clock_ext(clk);
^~~
../arch/s390/include/asm/timex.h:149:44: note: passing argument to
parameter 'clk' here
static inline void get_tod_clock_ext(char *clk)
^
Change clk's type to just be char so that it matches what happens in
get_tod_clock_ext.
Fixes: 57b28f66316d ("[S390] s390_hypfs: Add new attributes")
Link: https://github.com/ClangBuiltLinux/linux/issues/861
Link: http://lkml.kernel.org/r/20200208140858.47970-1-natechancellor@gmail.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 27dc0700c3be7c681cea03c5230b93d02f623492 upstream.
The query parameter block might contain additional information and can
be extended in the future. If the size of the block does not suffice we
get an error code of rc=0x100. The buffer will contain all information
up to the specified size and the hypervisor/guest simply do not need the
additional information as they do not know about the new data. That
means that we can (and must) accept rc=0x100 as success.
Cc: stable@vger.kernel.org
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Fixes: 5abb9351dfd9 ("s390/uv: introduce guest side ultravisor code")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 55680890ea78be0df5e1384989f1be835043c084 upstream.
The initial CPU reset clobbers the userspace fpc and the store status
ioctl clobbers the guest acrs + fpr. As these calls are only done via
ioctl (and not via vcpu_run), no CPU context is loaded, so we can (and
must) act directly on the sync regs, not on the thread context.
Cc: stable@kernel.org
Fixes: e1788bb995be ("KVM: s390: handle floating point registers in the run ioctl not in vcpu_put/load")
Fixes: 31d8b8d41a7e ("KVM: s390: handle access registers in the run ioctl not in vcpu_put/load")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20200131100205.74720-2-frankja@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5f490a520bcb393389a4d44bec90afcb332eb112 upstream.
Commit ee71d16d22bb ("s390/mm: make TASK_SIZE independent from the number
of page table levels") changed the logic of TASK_SIZE and also removed the
arch_mmap_check() implementation for s390. This combination has a subtle
effect on how get_unmapped_area() for hugetlbfs pages works. It is now
possible that a user process establishes a hugetlbfs mapping at an address
above 4 TB, without triggering a dynamic pagetable upgrade from 3 to 4
levels.
This is because hugetlbfs mappings will not use mm->get_unmapped_area, but
rather file->f_op->get_unmapped_area, which currently is the generic
implementation of hugetlb_get_unmapped_area() that does not know about s390
dynamic pagetable upgrades, but with the new definition of TASK_SIZE, it
will now allow mappings above 4 TB.
Subsequent access to such a mapped address above 4 TB will result in a page
fault loop, because the CPU cannot translate such a large address with 3
pagetable levels. The fault handler will try to map in a hugepage at the
address, but due to the folded pagetable logic it will end up with creating
entries in the 3 level pagetable, possibly overwriting existing mappings,
and then it all repeats when the access is retried.
Apart from the page fault loop, this can have various nasty effects, e.g.
kernel panic from one of the BUG_ON() checks in memory management code,
or even data loss if an existing mapping gets overwritten.
Fix this by implementing HAVE_ARCH_HUGETLB_UNMAPPED_AREA support for s390,
providing an s390 version for hugetlb_get_unmapped_area() with pagetable
upgrade support similar to arch_get_unmapped_area(), which will then be
used instead of the generic version.
Fixes: ee71d16d22bb ("s390/mm: make TASK_SIZE independent from the number of page table levels")
Cc: <stable@vger.kernel.org> # 4.12+
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 40260b01d029ba374637838213af500e03305326 upstream.
The new machine loader on z15 always creates an IPL Report block and
thus sets the IPL_PL_FLAG_IPLSR even when secure boot is disabled. This
causes the wrong message being printed at boot. Fix this by checking for
IPL_PL_FLAG_SIPL instead.
Fixes: 9641b8cc733f ("s390/ipl: read IPL report at early boot")
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c23587c92f6e3260fe3b82bb75b38aa2553b9468 ]
the purgatory must not rely on functions from the "old" kernel,
so we must disable kasan and friends. We also need to have a
separate copy of string.c as the default does not build memcmp
with KASAN.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 72a81ad9d6d62dcb79f7e8ad66ffd1c768b72026 ]
If an SMT capable system is not IPL'ed from the first CPU the setup of
the physical to logical CPU mapping is broken: the IPL core gets CPU
number 0, but then the next core gets CPU number 1. Correct would be
that all SMT threads of CPU 0 get the subsequent logical CPU numbers.
This is important since a lot of code (like e.g. the CPU topology
code) assumes that CPU maps are setup like this. If the mapping is
broken the system will not IPL due to broken topology masks:
[ 1.716341] BUG: arch topology broken
[ 1.716342] the SMT domain not a subset of the MC domain
[ 1.716343] BUG: arch topology broken
[ 1.716344] the MC domain not a subset of the BOOK domain
This scenario can usually not happen since LPARs are always IPL'ed
from CPU 0 and also re-IPL is intiated from CPU 0. However older
kernels did initiate re-IPL on an arbitrary CPU. If therefore a re-IPL
from an old kernel into a new kernel is initiated this may lead to
crash.
Fix this by setting up the physical to logical CPU mapping correctly.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit feee6b2989165631b17ac6d4ccdbf6759254e85a upstream.
We currently try to shrink a single zone when removing memory. We use
the zone of the first page of the memory we are removing. If that
memmap was never initialized (e.g., memory was never onlined), we will
read garbage and can trigger kernel BUGs (due to a stale pointer):
BUG: unable to handle page fault for address: 000000000000353d
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ #317
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:clear_zone_contiguous+0x5/0x10
Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840
RSP: 0018:ffffad2400043c98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000
RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40
RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000
R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680
FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__remove_pages+0x4b/0x640
arch_remove_memory+0x63/0x8d
try_remove_memory+0xdb/0x130
__remove_memory+0xa/0x11
acpi_memory_device_remove+0x70/0x100
acpi_bus_trim+0x55/0x90
acpi_device_hotplug+0x227/0x3a0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x221/0x550
worker_thread+0x50/0x3b0
kthread+0x105/0x140
ret_from_fork+0x3a/0x50
Modules linked in:
CR2: 000000000000353d
Instead, shrink the zones when offlining memory or when onlining failed.
Introduce and use remove_pfn_range_from_zone(() for that. We now
properly shrink the zones, even if we have DIMMs whereby
- Some memory blocks fall into no zone (never onlined)
- Some memory blocks fall into multiple zones (offlined+re-onlined)
- Multiple memory blocks that fall into different zones
Drop the zone parameter (with a potential dubious value) from
__remove_pages() and __remove_section().
Link: http://lkml.kernel.org/r/20191006085646.5768-6-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0539ad0b22877225095d8adef0c376f52cc23834 ]
The s390 CPU Measurement sampling facility has an overflow condition
which fires when all entries in a SBD are used.
The measurement alert interrupt is triggered and reads out all samples
in this SDB. It then tests the successor SDB, if this SBD is not full,
the interrupt handler does not read any samples at all from this SDB
The design waits for the hardware to fill this SBD and then trigger
another meassurement alert interrupt.
This scheme works nicely until
an perf_event_overflow() function call discards the sample due to
a too high sampling rate.
The interrupt handler has logic to read out a partially filled SDB
when the perf event overflow condition in linux common code is met.
This causes the CPUM sampling measurement hardware and the PMU
device driver to operate on the same SBD's trailer entry.
This should not happen.
This can be seen here using this trace:
cpumsf_pmu_add: tear:0xb5286000
hw_perf_event_update: sdbt 0xb5286000 full 1 over 0 flush_all:0
hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0
above shows 1. interrupt
hw_perf_event_update: sdbt 0xb5286008 full 1 over 0 flush_all:0
hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0
above shows 2. interrupt
... this goes on fine until...
hw_perf_event_update: sdbt 0xb5286068 full 1 over 0 flush_all:0
perf_push_sample1: overflow
one or more samples read from the IRQ handler are rejected by
perf_event_overflow() and the IRQ handler advances to the next SDB
and modifies the trailer entry of a partially filled SDB.
hw_perf_event_update: sdbt 0xb5286070 full 0 over 0 flush_all:1
timestamp: 14:32:52.519953
Next time the IRQ handler is called for this SDB the trailer entry shows
an overflow count of 19 missed entries.
hw_perf_event_update: sdbt 0xb5286070 full 1 over 19 flush_all:1
timestamp: 14:32:52.970058
Remove access to a follow on SDB when event overflow happened.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 39d4a501a9ef55c57b51e3ef07fc2aeed7f30b3b ]
Function perf_event_ever_overflow() and perf_event_account_interrupt()
are called every time samples are processed by the interrupt handler.
However function perf_event_account_interrupt() has checks to avoid being
flooded with interrupts (more then 1000 samples are received per
task_tick). Samples are then dropped and a PERF_RECORD_THROTTLED is
added to the perf data. The perf subsystem limit calculation is:
maximum sample frequency := 100000 --> 1 samples per 10 us
task_tick = 10ms = 10000us --> 1000 samples per task_tick
The work flow is
measurement_alert() uses SDBT head and each SBDT points to 511
SDB pages, each with 126 sample entries. After processing 8 SBDs
and for each valid sample calling:
perf_event_overflow()
perf_event_account_interrupts()
there is a considerable amount of samples being dropped, especially when
the sample frequency is very high and near the 100000 limit.
To avoid the high amount of samples being dropped near the end of a
task_tick time frame, increment the sampling interval in case of
dropped events. The CPU Measurement sampling facility on the s390
supports only intervals, specifiing how many CPU cycles have to be
executed before a sample is generated. Increase the interval when the
samples being generated hit the task_tick limit.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7f28dad395243c5026d649136823bbc40029a828 ]
Make sure preemption is disabled when temporary switching to nodat
stack with CALL_ON_STACK helper, because nodat stack is per cpu.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 247f265fa502e7b17a0cb0cc330e055a36aafce4 ]
Each SBDT is located at a 4KB page and contains 512 entries.
Each entry of a SDBT points to a SDB, a 4KB page containing
sampled data. The last entry is a link to another SDBT page.
When an event is created the function sequence executed is:
__hw_perf_event_init()
+--> allocate_buffers()
+--> realloc_sampling_buffers()
+---> alloc_sample_data_block()
Both functions realloc_sampling_buffers() and
alloc_sample_data_block() allocate pages and the allocation
can fail. This is handled correctly and all allocated
pages are freed and error -ENOMEM is returned to the
top calling function. Finally the event is not created.
Once the event has been created, the amount of initially
allocated SDBT and SDB can be too low. This is detected
during measurement interrupt handling, where the amount
of lost samples is calculated. If the number of lost samples
is too high considering sampling frequency and already allocated
SBDs, the number of SDBs is enlarged during the next execution
of cpumsf_pmu_enable().
If more SBDs need to be allocated, functions
realloc_sampling_buffers()
+---> alloc-sample_data_block()
are called to allocate more pages. Page allocation may fail
and the returned error is ignored. A SDBT and SDB setup
already exists.
However the modified SDBTs and SDBs might end up in a situation
where the first entry of an SDBT does not point to an SDB,
but another SDBT, basicly an SBDT without payload.
This can not be handled by the interrupt handler, where an SDBT
must have at least one entry pointing to an SBD.
Add a check to avoid SDBTs with out payload (SDBs) when enlarging
the buffer setup.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf018ee644897d7982e1b8dd8b15e97db6e1a4da ]
Currently unwinder unconditionally returns %r14 from the first frame
pointed by %r15 from pt_regs. A task could be interrupted when a function
already allocated this frame (if it needs it) for its callees or to
store local variables. In that case this frame would contain random
values from stack or values stored there by a callee. As we are only
interested in %r14 to get potential return address, skip bogus return
addresses which doesn't belong to kernel text.
This helps to avoid duplicating filtering logic in unwider users, most
of which use unwind_get_return_address() and would choke on bogus 0
address returned by it otherwise.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6feeee8efc53035c3195b02068b58ae947538aa4 ]
The following sequence triggers a kernel stack overflow on s390x:
mount -t tracefs tracefs /sys/kernel/tracing
cd /sys/kernel/tracing
echo function_graph > current_tracer
[crash]
This is because preempt_count_{add,sub} are in the list of traced
functions, which can be demonstrated by:
echo preempt_count_add >set_ftrace_filter
echo function_graph > current_tracer
[crash]
The stack overflow happens because get_tod_clock_monotonic() gets called
by ftrace but itself calls preempt_{disable,enable}(), which leads to a
endless recursion. Fix this by using preempt_{disable,enable}_notrace().
Fixes: 011620688a71 ("s390/time: ensure get_clock_monotonic() returns monotonic values")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6a82e23f45fe0aa821e7a935e39d0acb20c275c0 ]
Linux-next commit titled "perf/core: Optimize perf_init_event()"
changed the semantics of PMU device driver registration.
It was done to speed up the lookup/handling of PMU device driver
specific events. It also enforces that only one PMU device
driver will be registered of type PERF_EVENT_RAW.
This change added these line in function perf_pmu_register():
...
+ ret = idr_alloc(&pmu_idr, pmu, max, 0, GFP_KERNEL);
+ if (ret < 0)
goto free_pdc;
+
+ WARN_ON(type >= 0 && ret != type);
The warn_on generates a message. We have 3 PMU device drivers,
each registered as type PERF_TYPE_RAW.
The cf_diag device driver (arch/s390/kernel/perf_cpumf_cf_diag.c)
always hits the WARN_ON because it is the second PMU device driver
(after sampling device driver arch/s390/kernel/perf_cpumf_sf.c)
which is registered as type 4 (PERF_TYPE_RAW).
So when the sampling device driver is registered, ret has value 4.
When cf_diag device driver is registered with type 4,
ret has value of 5 and WARN_ON fires.
Adjust the PMU device drivers for s390 to support the new
semantics required by perf_pmu_register().
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 13f9bae579c6bd051e58f326913dd09af1291208 ]
Currently if the kernel is built with CONFIG_TRACE_IRQFLAGS and KASAN
and used as crash kernel it crashes itself due to
trace_hardirqs_off/trace_hardirqs_on being called with DAT off. This
happens because trace_hardirqs_off/trace_hardirqs_on are instrumented and
kasan code tries to perform access to shadow memory to validate memory
accesses. Kasan shadow memory is populated with vmemmap, so all accesses
require DAT on.
memcpy_real could be called with DAT on or off (with kasan enabled DAT
is set even before early code is executed).
Make sure that trace_hardirqs_off/trace_hardirqs_on are called with DAT
on and only actual __memcpy_real is called with DAT off.
Also annotate __memcpy_real and _memcpy_real with __no_sanitize_address
to avoid further problems due to switching DAT off.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0398d4ab1677f7d8cd43aac2aa29a93dfcf9e2e3 ]
s390_crypto_shash_parmsize() return type is int, it
should not be stored in a unsigned variable, which
compared with zero.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 3c2eb6b76cab ("s390/crypto: Support for SHA3 via CPACF (MSA6)")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Joerg Schmidbauer <jschmidb@linux.vnet.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 544f1d62e3e6c6e6d17a5e56f6139208acb5ff46 ]
Due to kptr_restrict, JITted BPF code is now displayed like this:
000000000b6ed1b2: ebdff0800024 stmg %r13,%r15,128(%r15)
000000004cde2ba0: 41d0f040 la %r13,64(%r15)
00000000fbad41b0: a7fbffa0 aghi %r15,-96
Leaking kernel addresses to dmesg is not a concern in this case, because
this happens only when JIT debugging is explicitly activated, which only
root can do.
Use %px in this particular instance, and also to print an instruction
address in show_code and PCREL (e.g. brasl) arguments in print_insn.
While at present functionally equivalent to %016lx, %px is recommended
by Documentation/core-api/printk-formats.rst for such cases.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 166f11d11f6f70439830d09bfa5552ec1b368494 ]
A BPF program may consist of 1m instructions, which means JIT
instruction-address mapping can be as large as 4m. s390 has
FORCE_MAX_ZONEORDER=9 (for memory hotplug reasons), which means maximum
kmalloc size is 1m. This makes it impossible to JIT programs with more
than 256k instructions.
Fix by using kvcalloc, which falls back to vmalloc for larger
allocations. An alternative would be to use a radix tree, but that is
not supported by bpf_prog_fill_jited_linfo.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107141838.92202-1-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2416cefc504ba8ae9b17e3e6b40afc72708f96be ]
Unlike pxd_free_tlb(), the pxd_free() functions do not check for folded
page tables. This is not an issue so far, as those functions will actually
never be called, since no code will reach them when page tables are folded.
In order to avoid future issues, and to make the s390 code more similar to
other architectures, add mm_pxd_folded() checks, similar to how it is done
in pxd_free_tlb().
This was found by testing a patch from from Anshuman Khandual, which is
currently discussed on LKML ("mm/debug: Add tests validating architecture
page table helpers").
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit effb83ccc83a97dbbe5214f4c443522719f05f3a ]
perf_callchain_kernel stops neither when it encounters a garbage
address, nor when it runs out of space. Fix both issues using x86
version as an inspiration.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 011620688a71f2f1fe9901dbc2479a7c01053196 ]
The current implementation of get_clock_monotonic() leaves it up to
the caller to call the function with preemption disabled. The only
core kernel caller (sched_clock) however does not disable preemption.
In order to make sure that all callers of this function see monotonic
values handle disabling preemption within the function itself.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a9f2f6865d784477e1c7b59269d3a384abafd9ca upstream.
The KASLR offset is added to vmcoreinfo in arch_crash_save_vmcoreinfo(),
so that it can be found by crash when processing kernel dumps.
However, arch_crash_save_vmcoreinfo() is called during a subsys_initcall,
so if the kernel crashes before that, we have no vmcoreinfo and no KASLR
offset.
Fix this by storing the KASLR offset in the lowcore, where the vmcore_info
pointer will be stored, and where it can be found by crash. In order to
make it distinguishable from a real vmcore_info pointer, mark it as uneven
(KASLR offset itself is aligned to THREAD_SIZE).
When arch_crash_save_vmcoreinfo() stores the real vmcore_info pointer in
the lowcore, it overwrites the KASLR offset. At that point, the KASLR
offset is not yet added to vmcoreinfo, so we also need to move the
mem_assign_absolute() behind the vmcoreinfo_append_str().
Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a2308c11ecbc3471ebb7435ee8075815b1502ef0 upstream.
When a secondary CPU is brought up it must initialize its control
registers. CPU A which triggers that a secondary CPU B is brought up
stores its control register contents into the lowcore of new CPU B,
which then loads these values on startup.
This is problematic in various ways: the control register which
contains the home space ASCE will correctly contain the kernel ASCE;
however control registers for primary and secondary ASCEs are
initialized with whatever values were present in CPU A.
Typically:
- the primary ASCE will contain the user process ASCE of the process
that triggered onlining of CPU B.
- the secondary ASCE will contain the percpu VDSO ASCE of CPU A.
Due to lazy ASCE handling we may also end up with other combinations.
When then CPU B switches to a different process (!= idle) it will
fixup the primary ASCE. However the problem is that the (wrong) ASCE
from CPU A was loaded into control register 1: as soon as an ASCE is
attached (aka loaded) a CPU is free to generate TLB entries using that
address space.
Even though it is very unlikey that CPU B will actually generate such
entries, this could result in TLB entries of the address space of the
process that ran on CPU A. These entries shouldn't exist at all and
could cause problems later on.
Furthermore the secondary ASCE of CPU B will not be updated correctly.
This means that processes may see wrong results or even crash if they
access VDSO data on CPU B. The correct VDSO ASCE will eventually be
loaded on return to user space as soon as the kernel executed a call
to strnlen_user or an atomic futex operation on CPU B.
Fix both issues by intializing the to be loaded control register
contents with the correct ASCEs and also enforce (re-)loading of the
ASCEs upon first context switch and return to user space.
Fixes: 0aaba41b58bc ("s390: remove all code using the access register mode")
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ab874f22d35a8058d8fdee5f13eb69d8867efeae upstream.
On older HW or under a hypervisor, w/o the instruction-execution-
protection (IEP) facility, and also w/o EDAT-1, a translation-specification
exception may be recognized when bit 55 of a pte is one (_PAGE_NOEXEC).
The current code tries to prevent setting _PAGE_NOEXEC in such cases,
by removing it within set_pte_at(). However, ptep_set_access_flags()
will modify a pte directly, w/o using set_pte_at(). There is at least
one scenario where this can result in an active pte with _PAGE_NOEXEC
set, which would then lead to a panic due to a translation-specification
exception (write to swapped out page):
do_swap_page
pte = mk_pte (with _PAGE_NOEXEC bit)
set_pte_at (will remove _PAGE_NOEXEC bit in page table, but keep it
in local variable pte)
vmf->orig_pte = pte (pte still contains _PAGE_NOEXEC bit)
do_wp_page
wp_page_reuse
entry = vmf->orig_pte (still with _PAGE_NOEXEC bit)
ptep_set_access_flags (writes entry with _PAGE_NOEXEC bit)
Fix this by clearing _PAGE_NOEXEC already in mk_pte_phys(), where the
pgprot value is applied, so that no pte with _PAGE_NOEXEC will ever be
visible, if it is not supported. The check in set_pte_at() can then also
be removed.
Cc: <stable@vger.kernel.org> # 4.11+
Fixes: 57d7f939e7bd ("s390: add no-execute support")
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The idle time reported in /proc/stat sometimes incorrectly contains
huge values on s390. This is caused by a bug in arch_cpu_idle_time().
The kernel tries to figure out when a different cpu entered idle by
accessing its per-cpu data structure. There is an ordering problem: if
the remote cpu has an idle_enter value which is not zero, and an
idle_exit value which is zero, it is assumed it is idle since
"now". The "now" timestamp however is taken before the idle_enter
value is read.
Which in turn means that "now" can be smaller than idle_enter of the
remote cpu. Unconditionally subtracting idle_enter from "now" can thus
lead to a negative value (aka large unsigned value).
Fix this by moving the get_tod_clock() invocation out of the
loop. While at it also make the code a bit more readable.
A similar bug also exists for show_idle_time(). Fix this is as well.
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
unwind_for_each_frame stops after the first frame if regs->gprs[15] <=
sp.
The reason is that in case regs are specified, the first frame should be
regs->psw.addr and the second frame should be sp->gprs[8]. However,
currently the second frame is regs->gprs[15], which confuses
outside_of_stack().
Fix by introducing a flag to distinguish this special case from
unwinding the interrupt handler, for which the current behavior is
appropriate.
Fixes: 78c98f907413 ("s390/unwind: introduce stack unwind API")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: stable@vger.kernel.org # v5.2+
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
Christian Borntraeger
Niklas Schnelle
Philipp Rudo
Sean Christopherson
David Hildenbrand
Thomas Richter
Alexander Gordeev
Michael Mueller
Sven Schnelle
Gerald Schaefer
Julian Wiedmann
Masahiro Yamada
Nathan Chancellor
Vasily Gorbik
Heiko Carstens
YueHaibing
Ilya Leoshkevich