summaryrefslogtreecommitdiffstats
path: root/arch/s390/pci
AgeCommit message (Collapse)Author
2014-02-21s390/pci/dma: use correct segment boundary sizeGerald Schaefer
The boundary size for iommu_area_alloc() is currently set to a constant value. This is wrong, we shouldn't use a constant value but rather the return value of dma_get_seg_boundary(), since a device driver can override the default. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-01-22Merge tag 'pci-v3.14-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v3.14 merge window: Resource management - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas) - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu) - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas) - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas) - Enforce bus address limits in resource allocation (Yinghai Lu) - Allocate 64-bit BARs above 4G when possible (Yinghai Lu) - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu) PCI device hotplug - Major rescan/remove locking update (Rafael J. Wysocki) - Make ioapic builtin only (not modular) (Yinghai Lu) - Fix release/free issues (Yinghai Lu) - Clean up pciehp (Bjorn Helgaas) - Announce pciehp slot info during enumeration (Bjorn Helgaas) MSI - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev) - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev) - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev) - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman) - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong) SR-IOV - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao) Virtualization - Add support for save/restore of extended capabilities (Alex Williamson) - Add Virtual Channel to save/restore support (Alex Williamson) - Never treat a VF as a multifunction device (Alex Williamson) - Add pci_try_reset_function(), et al (Alex Williamson) AER - Ignore non-PCIe error sources (Betty Dall) - Support ACPI HEST error sources for domains other than 0 (Betty Dall) - Consolidate HEST error source parsers (Bjorn Helgaas) - Add a TLP header print helper (Borislav Petkov) Freescale i.MX6 - Remove unnecessary code (Fabio Estevam) - Make reset-gpio optional (Marek Vasut) - Report "link up" only after link training completes (Marek Vasut) - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut) - Fix PCIe startup code (Richard Zhu) Marvell MVEBU - Remove duplicate of_clk_get_by_name() call (Andrew Lunn) - Drop writes to bridge Secondary Status register (Jason Gunthorpe) - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe) - Support a bridge with no IO port window (Jason Gunthorpe) - Use max_t() instead of max(resource_size_t,) (Jingoo Han) - Remove redundant of_match_ptr (Sachin Kamat) - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni) NVIDIA Tegra - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower) Renesas R-Car - Add runtime PM support (Valentine Barshak) - Fix rcar_pci_probe() return value check (Wei Yongjun) Synopsys DesignWare - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen) - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen) - Fix missing MSI IRQs (Harro Haan) - Add dw_pcie prefix before cfg_read/write (Pratyush Anand) - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand) - Whitespace cleanup (Jingoo Han) EISA - Call put_device() if device_register() fails (Levente Kurusa) - Revert EISA initialization breakage ((Bjorn Helgaas) Miscellaneous - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger) - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas) - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas) - Use dev_is_pci() to identify PCI devices (Yijing Wang) - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches) - Update documentation 00-INDEX (Erik Ekman)" * tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits) Revert "EISA: Initialize device before its resources" Revert "EISA: Log device resources in dmesg" vfio-pci: Use pci "try" reset interface PCI: Check parent kobject in pci_destroy_dev() xen/pcifront: Use global PCI rescan-remove locking powerpc/eeh: Use global PCI rescan-remove locking PCI: Fix pci_check_and_unmask_intx() comment typos PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus() MPT / PCI: Use pci_stop_and_remove_bus_device_locked() platform / x86: Use global PCI rescan-remove locking PCI: hotplug: Use global PCI rescan-remove locking pcmcia: Use global PCI rescan-remove locking ACPI / hotplug / PCI: Use global PCI rescan-remove locking ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug PCI: Add global pci_lock_rescan_remove() PCI: Cleanup pci.h whitespace PCI: Reorder so actual code comes before stubs PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0 ACPICA: Add helper macros to extract bus/segment numbers from HEST table. PCI: Make local functions static ...
2014-01-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "The bulk of the s390 updates for v3.14. New features are the perf support for the CPU-Measurement Sample Facility and the EP11 support for the crypto cards. And the normal cleanups and bug-fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (44 commits) s390/cpum_sf: fix printk format warnings s390: Fix misspellings using 'codespell' tool s390/qdio: bridgeport support - CHSC part s390: delete new instances of __cpuinit usage s390/compat: fix PSW32_USER_BITS definition s390/zcrypt: add support for EP11 coprocessor cards s390/mm: optimize randomize_et_dyn for !PF_RANDOMIZE s390: use IS_ENABLED to check if a CONFIG is set to y or m s390/cio: use device_lock to synchronize calls to the ccwgroup driver s390/cio: use device_lock to synchronize calls to the ccw driver s390/cio: fix unlocked access of online member s390/cpum_sf: Add flag to process full SDBs only s390/cpum_sf: Add raw data sampling to support the diagnostic-sampling function s390/cpum_sf: Filter perf events based event->attr.exclude_* settings s390/cpum_sf: Detect KVM guest samples s390/cpum_sf: Add helper to read TOD from trailer entries s390/cpum_sf: Atomically reset trailer entry fields of sample-data-blocks s390/cpum_sf: Dynamically extend the sampling buffer if overflows occur s390/pci: reenable per default s390/pci/dma: fix accounting of allocated_pages ...
2013-12-30s390/pci: obtain function handle in hotplug notifierSebastian Ott
When using the CLP interface to enable or disable a pci device a valid function handle needs to be delivered. So far our assumption was that we always have an up-to-date version of the function handle (since it doesn't change when the device is in use). This assumption is incorrect if the pci device is enabled or disabled outside of our control. When we are notified about such a change we already receive the new function handle. Just use it. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-20s390/PCI: Remove superfluous check of MSI typeAlexander Gordeev
arch_setup_msi_irqs() hook can only be called from the generic MSI code which ensures correct MSI type parameter. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-20s390/PCI: Fix single MSI only checkAlexander Gordeev
Multiple MSIs have never been supported on s390 architecture, but the platform code fails to report single MSI only. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-16s390/pci: reenable per defaultSebastian Ott
HW, FW and Linux support is in a better shape now - let's reenable pci bus probing per default. Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-16s390/pci/dma: fix accounting of allocated_pagesSebastian Ott
allocated_pages sometimes are increased even if s390_dma_alloc fails also this value is never decreased even if s390_dma_free is called. This patch fixes these bugs. Also remove the atomic64_t casts (the members are already of this type). Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-16s390/pci: set error state for unavailable functionsSebastian Ott
If we receive a notification that a pci function became unavailable we clean up by removing the pci device. This can confuse the driver since the function is already unaccessible. Improve this situation by setting an appropriate error_state. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-16s390/pci: fix removal of nonexistent pci busSebastian Ott
If we remove a pci bus after receiving a hotplug notification we need to check if the bus is actually present (creation of the pci bus during an earlier notification may have been failed). Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-16s390/pci: prevent inadvertently triggered bus scansSebastian Ott
Initialization and scanning of the pci bus is omitted on older machines without pci support or if pci=off was specified. Remember the fact that we ran without pci support and prevent further bus scans during resume from hibernate or after receiving hotplug notifications. Reported-by: Stefan Haberland <stefan.haberland@de.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-15s390/pci: implement hotplug notificationsSebastian Ott
When the availability of a pci function has changed by means outside of our control we receive an availability event. Implement/improve the handling of these notifications. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-15s390/pci: implement pcibios_remove_busSebastian Ott
Implement pcibios_remove_bus to free arch specific data when a pci bus is deregistered. While at it remove a useless kzalloc/kfree wrapper. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-15s390/pci: improve handling of bus resourcesSebastian Ott
Cleanup the functions for allocation and setup of bus resources. Do not allocate the same name for each resource but use a per-bus name. Also provide means to cleanup all resources allocated by a bus. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/pci: cleanup function information blockSebastian Ott
Cleanup function information block used as a modify pci function parameter. Change reserved members to be anonymous. Fix the size of the struct and add proper alignment information. Also put the FIB on the stack. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/pci: message cleanupSebastian Ott
Cleanup arch specific pci messages. Remove unhelpful messages and replace others with entries in the debugfs. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/pci: implement hibernation hooksSebastian Ott
Implement architecture-specific functionality when a PCI device is doing a hibernate transition. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/pci: use virtual memory for iommu bitmapSebastian Ott
The bitmap used to mark dma mappings can be quite large on systems with huge amounts of memory. Use virtual memory for this bitmap. Suggested-by: Alexander Schmidt <alexschm@de.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/pci: update function handle after resume from hibernateSebastian Ott
Function handles may change while the system was in hibernation use list pci functions and update the function handles. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/pci: try harder to modify a functionSebastian Ott
In rare situations a PCI function can report a busy condition when we issue the modify pci function command. A temporary busy condition can exceed 1 second but not 2 seconds. Increase the time until we report an error to 2 seconds. Also increase the time we sleep between the retries to reduce the load in this case. Suggested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/pci: split lpfSebastian Ott
List pci functions is used to query and iterate over pci functions. This function currently has 2 users - initial device discovery and rescan after a machine check. Instead of having a multipurpose function pass a callback which gets called for each pci function. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/pci: add recover sysfs knobSebastian Ott
Add an arch specific attribute to recover a pci function from an error state or config space blockage. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/pci: use claim_resourceSebastian Ott
Use pci_claim_resource to find and request bus ressources in pcibios_add_device. Also move some (de)initialization stuff to pcibios_enable_device/pcibios_disable_device. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/pci/hotplug: convert to be builtin onlySebastian Ott
Convert s390' pci hotplug to be builtin only, with no module option. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-22s390: convert interrupt handling to use generic hardirqMartin Schwidefsky
With the introduction of PCI it became apparent that s390 should convert to generic hardirqs as too many drivers do not have the correct dependency for GENERIC_HARDIRQS. On the architecture level s390 does not have irq lines. It has external interrupts, I/O interrupts and adapter interrupts. This patch hard-codes all external interrupts as irq #1, all I/O interrupts as irq #2 and all adapter interrupts as irq #3. The additional information from the lowcore associated with the interrupt is stored in the pt_regs of the interrupt frame, where the interrupt handler can pick it up. For PCI/MSI interrupts the adapter interrupt handler scans the relevant bit fields and calls generic_handle_irq with the virtual irq number for the MSI interrupt. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-22s390/pci: use adapter interrupt vector helpersMartin Schwidefsky
Make use of the adapter interrupt helpers in the PCI code. This is the first step to convert the MSI interrupt code to PCI domains. The patch removes the limitation of 64 adapter interrupts per PCI function. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-22s390/pci: cleanup function namesMartin Schwidefsky
Rename s390pci_xyz to zpci_xxz and set_irq_ctrl to zpci_set_irq_ctrl. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-26s390/airq: simplify adapter interrupt codeMartin Schwidefsky
There are three users of adapter interrupts: AP, QDIO and PCI. Each registers a single adapter interrupt with independent ISCs. Define a "struct airq" with the interrupt handler, a pointer and a mask for the local summary indicator and the ISC for the adapter interrupt source. Convert the indicator array with its fixed number of adapter interrupt sources per ISE to an array of hlists. This removes the limitation to 32 adapter interrupts per ISC and allows for arbitrary memory locations for the local summary indicator. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-26s390/pci: remove per device debug attributeMartin Schwidefsky
The per-pci-device 'debug' attribute is ill defined. For each device it prints the same information, the adapter interrupt bit vector for irq numbers 0 & 1, the start of the global interrupt summary vector and the global irq retries counter. Just remove the attribute and the associated code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-26s390/pci: sysfs remove strlenSebastian Ott
Get rid of the strlen calls, use the return value of sprintf instead. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-26s390/pci: remove pdev during unplugSebastian Ott
The disable slot implementation on s390 currently just detaches the pci function from the partition - without informing the pci layer. Fix this by calling pci_stop_and_remove_bus_device prior to the operation. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-26s390/pci: cleanup hotplug codeSebastian Ott
Provide wrappers for the [de]configure operations, add some error handling, and use pci_scan_slot instead of pci_scan_single_device. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-26s390/pci: implement pcibios_release_deviceSebastian Ott
Use pcibios_release_device to implement architecture-specific functionality when a pci device is released. This function will be called during pci_release_dev. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-26s390/pci: use to_pci_devSebastian Ott
Use the to_pci_dev macro to fetch a pci_dev from a struct device pointer. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-10s390/pci: Implement IRQ functions if !PCIBen Hutchings
All architectures must implement IRQ functions. Since various dependencies on !S390 were removed, there are various drivers that can be selected but will fail to link. Provide a dummy implementation of these functions for the !PCI case. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@vger.kernel.org # 3.9 Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-26s390/pci: use pci_scan_root_busSebastian Ott
The pci config space accessors on s390 are (now) smart enough to figure out if a pci function is available. So instead of calling pci_create_root_bus and then pci_scan_single_device for each available function just call pci_scan_root_bus and let the pci core do the scanning (via config reads on all possible functions) and device creation. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-23s390/pci: return correct dma address for offset > PAGE_SIZEGerald Schaefer
For offset > PAGE_SIZE, s390_dma_map_pages() will issue a warning and return a wrong dma address. This patch removes the warning and fixes the dma return address calculation. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/pci: remove disable_device implementationSebastian Ott
pci_disable_device is called by a driver after it stops using the pci function - e.g. during the removal of the driver. The current implementation removes the architecture specific information of this function such that even after a call to pci_enable_device the pci function is no longer usable. Just remove pcibios_disable_device. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/pci: disable per defaultSebastian Ott
Disable pci on s390. Enable with pci=on. Suggested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/pci: return error after failed pci opsSebastian Ott
Access to pci config space via pci_ops should not fail silently. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/pci: do not read data after failed loadSebastian Ott
If a pci load instruction fails the content of the register where the data is stored is possibly unchanged. Fix the inline assembly wrapper __pcilg to not return stale data. Additionally fix the callers of this function who access uninitialized variables. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/pci: add exception table to load/store instructionsSebastian Ott
Don't let pci_load and friends crash the kernel when called with e.g. an invalid offset. Return -ENXIO instead. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/pci: rename instruction wrappersSebastian Ott
Use distinct (and hopefully sane) names for the pci instruction wrappers. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/pci: uninline instruction wrappersSebastian Ott
Uninline pci related instruction wrappers to de-bloat the code: add/remove: 15/0 grow/shrink: 2/24 up/down: 1326/-12628 (-11302) This is especially useful for the inlined pci read and write functions which are used all over the kernel. Also remove the unused __stpcifc while at it. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/pci: implement pcibios_add_deviceSebastian Ott
Use pcibios_add_device to do arch specific device initialization. This function will be called during pci_bus_add_device. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/pci: do not modify function handlesSebastian Ott
Don't modify function handles to get a disabled handle - call clp_disable_fh. With this change we also do no longer deconfigure enabled functions. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/pci: debug device statesSebastian Ott
Use the debugfs to keep track of a pci function's status changes. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/pci: msi cleanup hash usageSebastian Ott
The hash used for mapping irq numbers to msi descriptors does not utilize all buckets that were allocated. Fix this by using the same value (computed by the number of bits used for the hash function) at relevant places. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/pci: use kmem_cache_zalloc instead of kmem_cache_alloc/memsetWei Yongjun
Using kmem_cache_zalloc() instead of kmem_cache_alloc() and memset(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-07 10:59:18 +0000