aboutsummaryrefslogtreecommitdiffstats
path: root/arch/s390/kvm
AgeCommit message (Collapse)Author
2019-11-12kvm: Convert kvm_lock to a mutexJunaid Shahid
commit 0d9ce162cf46c99628cc5da9510b959c7976735b upstream. It doesn't seem as if there is any particular need for kvm_lock to be a spinlock, so convert the lock to a mutex so that sleepable functions (in particular cond_resched()) can be called while holding it. Signed-off-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-11KVM: s390: Test for bad access register and size at the start of S390_MEM_OPThomas Huth
commit a13b03bbb4575b350b46090af4dfd30e735aaed1 upstream. If the KVM_S390_MEM_OP ioctl is called with an access register >= 16, then there is certainly a bug in the calling userspace application. We check for wrong access registers, but only if the vCPU was already in the access register mode before (i.e. the SIE block has recorded it). The check is also buried somewhere deep in the calling chain (in the function ar_translation()), so this is somewhat hard to find. It's better to always report an error to the userspace in case this field is set wrong, and it's safer in the KVM code if we block wrong values here early instead of relying on a check somewhere deep down the calling chain, so let's add another check to kvm_s390_guest_mem_op() directly. We also should check that the "size" is non-zero here (thanks to Janosch Frank for the hint!). If we do not check the size, we could call vmalloc() with this 0 value, and this will cause a kernel warning. Signed-off-by: Thomas Huth <thuth@redhat.com> Link: https://lkml.kernel.org/r/20190829122517.31042-1-thuth@redhat.com Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-19KVM: s390: Do not leak kernel stack data in the KVM_S390_INTERRUPT ioctlThomas Huth
commit 53936b5bf35e140ae27e4bbf0447a61063f400da upstream. When the userspace program runs the KVM_S390_INTERRUPT ioctl to inject an interrupt, we convert them from the legacy struct kvm_s390_interrupt to the new struct kvm_s390_irq via the s390int_to_s390irq() function. However, this function does not take care of all types of interrupts that we can inject into the guest later (see do_inject_vcpu()). Since we do not clear out the s390irq values before calling s390int_to_s390irq(), there is a chance that we copy random data from the kernel stack which could be leaked to the userspace later. Specifically, the problem exists with the KVM_S390_INT_PFAULT_INIT interrupt: s390int_to_s390irq() does not handle it, and the function __inject_pfault_init() later copies irq->u.ext which contains the random kernel stack data. This data can then be leaked either to the guest memory in __deliver_pfault_init(), or the userspace might retrieve it directly with the KVM_S390_GET_IRQ_STATE ioctl. Fix it by handling that interrupt type in s390int_to_s390irq(), too, and by making sure that the s390irq struct is properly pre-initialized. And while we're at it, make sure that s390int_to_s390irq() now directly returns -EINVAL for unknown interrupt types, so that we immediately get a proper error code in case we add more interrupt types to do_inject_vcpu() without updating s390int_to_s390irq() sometime in the future. Cc: stable@vger.kernel.org Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Link: https://lore.kernel.org/kvm/20190912115438.25761-1-thuth@redhat.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-19KVM: s390: kvm_s390_vm_start_migration: check dirty_bitmap before using it ↵Igor Mammedov
as target for memset() commit 13a17cc0526f08d1df9507f7484176371cd263a0 upstream. If userspace doesn't set KVM_MEM_LOG_DIRTY_PAGES on memslot before calling kvm_s390_vm_start_migration(), kernel will oops with: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000483 Fault in home space mode while using kernel ASCE. AS:0000000002a2000b R2:00000001bff8c00b R3:00000001bff88007 S:00000001bff91000 P:000000000000003d Oops: 0004 ilc:2 [#1] SMP ... Call Trace: ([<001fffff804ec552>] kvm_s390_vm_set_attr+0x347a/0x3828 [kvm]) [<001fffff804ecfc0>] kvm_arch_vm_ioctl+0x6c0/0x1998 [kvm] [<001fffff804b67e4>] kvm_vm_ioctl+0x51c/0x11a8 [kvm] [<00000000008ba572>] do_vfs_ioctl+0x1d2/0xe58 [<00000000008bb284>] ksys_ioctl+0x8c/0xb8 [<00000000008bb2e2>] sys_ioctl+0x32/0x40 [<000000000175552c>] system_call+0x2b8/0x2d8 INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000000000dbaf60>] __memset+0xc/0xa0 due to ms->dirty_bitmap being NULL, which might crash the host. Make sure that ms->dirty_bitmap is set before using it or return -EINVAL otherwise. Cc: <stable@vger.kernel.org> Fixes: afdad61615cc ("KVM: s390: Fix storage attributes migration with memory slots") Signed-off-by: Igor Mammedov <imammedo@redhat.com> Link: https://lore.kernel.org/kvm/20190911075218.29153-1-imammedo@redhat.com/ Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGIONChristian Borntraeger
[ Upstream commit 19ec166c3f39fe1d3789888a74cc95544ac266d4 ] kselftests exposed a problem in the s390 handling for memory slots. Right now we only do proper memory slot handling for creation of new memory slots. Neither MOVE, nor DELETION are handled properly. Let us implement those. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-09KVM: s390: Do not report unusabled IDs via KVM_CAP_MAX_VCPU_IDThomas Huth
commit a86cb413f4bf273a9d341a3ab2c2ca44e12eb317 upstream. KVM_CAP_MAX_VCPU_ID is currently always reporting KVM_MAX_VCPU_ID on all architectures. However, on s390x, the amount of usable CPUs is determined during runtime - it is depending on the features of the machine the code is running on. Since we are using the vcpu_id as an index into the SCA structures that are defined by the hardware (see e.g. the sca_add_vcpu() function), it is not only the amount of CPUs that is limited by the hard- ware, but also the range of IDs that we can use. Thus KVM_CAP_MAX_VCPU_ID must be determined during runtime on s390x, too. So the handling of KVM_CAP_MAX_VCPU_ID has to be moved from the common code into the architecture specific code, and on s390x we have to return the same value here as for KVM_CAP_MAX_VCPUS. This problem has been discovered with the kvm_create_max_vcpus selftest. With this change applied, the selftest now passes on s390x, too. Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190523164309.13345-9-thuth@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12KVM: s390: Make huge pages unavailable in ucontrol VMsJanosch Frank
We currently do not notify all gmaps when using gmap_pmdp_xchg(), due to locking constraints. This makes ucontrol VMs, which is the only VM type that creates multiple gmaps, incompatible with huge pages. Also we would need to hold the guest_table_lock of all gmaps that have this vmaddr maped to synchronize access to the pmd. ucontrol VMs are rather exotic and creating a new locking concept is no easy task. Hence we return EINVAL when trying to active KVM_CAP_S390_HPAGE_1M and report it as being not available when checking for it. Fixes: a4499382 ("KVM: s390: Add huge page enablement control") Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20180801112508.138159-1-frankja@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2018-09-04KVM: s390: Properly lock mm context allow_gmap_hpage_1m settingJanosch Frank
We have to do down_write on the mm semaphore to set a bitfield in the mm context. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Fixes: a4499382 ("KVM: s390: Add huge page enablement control") Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-04KVM: s390: vsie: copy wrapping keys to right placePierre Morel
Copy the key mask to the right offset inside the shadow CRYCB Fixes: bbeaa58b3 ("KVM: s390: vsie: support aes dea wrapping keys") Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Cc: stable@vger.kernel.org # v4.8+ Message-Id: <1535019956-23539-2-git-send-email-pmorel@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-04KVM: s390: Fix pfmf and conditional skey emulationJanosch Frank
We should not return with a lock. We also have to increase the address when we do page clearing. Fixes: bd096f644319 ("KVM: s390: Add skey emulation fault handling") Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Message-Id: <20180830081355.59234-1-frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-08-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull first set of KVM updates from Paolo Bonzini: "PPC: - minor code cleanups x86: - PCID emulation and CR3 caching for shadow page tables - nested VMX live migration - nested VMCS shadowing - optimized IPI hypercall - some optimizations ARM will come next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (85 commits) kvm: x86: Set highest physical address bits in non-present/reserved SPTEs KVM/x86: Use CC_SET()/CC_OUT in arch/x86/kvm/vmx.c KVM: X86: Implement PV IPIs in linux guest KVM: X86: Add kvm hypervisor init time platform setup callback KVM: X86: Implement "send IPI" hypercall KVM/x86: Move X86_CR4_OSXSAVE check into kvm_valid_sregs() KVM: x86: Skip pae_root shadow allocation if tdp enabled KVM/MMU: Combine flushing remote tlb in mmu_set_spte() KVM: vmx: skip VMWRITE of HOST_{FS,GS}_BASE when possible KVM: vmx: skip VMWRITE of HOST_{FS,GS}_SEL when possible KVM: vmx: always initialize HOST_{FS,GS}_BASE to zero during setup KVM: vmx: move struct host_state usage to struct loaded_vmcs KVM: vmx: compute need to reload FS/GS/LDT on demand KVM: nVMX: remove a misleading comment regarding vmcs02 fields KVM: vmx: rename __vmx_load_host_state() and vmx_save_host_state() KVM: vmx: add dedicated utility to access guest's kernel_gs_base KVM: vmx: track host_state.loaded using a loaded_vmcs pointer KVM: vmx: refactor segmentation code in vmx_save_host_state() kvm: nVMX: Fix fault priority for VMX operations kvm: nVMX: Fix fault vector for VMX operation at CPL > 0 ...
2018-08-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: "Since Martin is on vacation you get the s390 pull request from me: - Host large page support for KVM guests. As the patches have large impact on arch/s390/mm/ this series goes out via both the KVM and the s390 tree. - Add an option for no compression to the "Kernel compression mode" menu, this will come in handy with the rework of the early boot code. - A large rework of the early boot code that will make life easier for KASAN and KASLR. With the rework the bootable uncompressed image is not generated anymore, only the bzImage is available. For debuggung purposes the new "no compression" option is used. - Re-enable the gcc plugins as the issue with the latent entropy plugin is solved with the early boot code rework. - More spectre relates changes: + Detect the etoken facility and remove expolines automatically. + Add expolines to a few more indirect branches. - A rewrite of the common I/O layer trace points to make them consumable by 'perf stat'. - Add support for format-3 PCI function measurement blocks. - Changes for the zcrypt driver: + Add attributes to indicate the load of cards and queues. + Restructure some code for the upcoming AP device support in KVM. - Build flags improvements in various Makefiles. - A few fixes for the kdump support. - A couple of patches for gcc 8 compile warning cleanup. - Cleanup s390 specific proc handlers. - Add s390 support to the restartable sequence self tests. - Some PTR_RET vs PTR_ERR_OR_ZERO cleanup. - Lots of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (107 commits) s390/dasd: fix hanging offline processing due to canceled worker s390/dasd: fix panic for failed online processing s390/mm: fix addressing exception after suspend/resume rseq/selftests: add s390 support s390: fix br_r1_trampoline for machines without exrl s390/lib: use expoline for all bcr instructions s390/numa: move initial setup of node_to_cpumask_map s390/kdump: Fix elfcorehdr size calculation s390/cpum_sf: save TOD clock base in SDBs for time conversion KVM: s390: Add huge page enablement control s390/mm: Add huge page gmap linking support s390/mm: hugetlb pages within a gmap can not be freed KVM: s390: Add skey emulation fault handling s390/mm: Add huge pmd storage key handling s390/mm: Clear skeys for newly mapped huge guest pmds s390/mm: Clear huge page storage keys on enable_skey s390/mm: Add huge page dirty sync support s390/mm: Add gmap pmd invalidation and clearing s390/mm: Add gmap pmd notification bit setting s390/mm: Add gmap pmd linking ...
2018-07-30Merge tag 'hlp_stage1' of ↵Janosch Frank
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvms390/next KVM: s390: initial host large page support - must be enabled via module parameter hpage=1 - cannot be used together with nested - does support migration - does support hugetlbfs - no THP yet
2018-07-30KVM: s390: Add huge page enablement controlJanosch Frank
General KVM huge page support on s390 has to be enabled via the kvm.hpage module parameter. Either nested or hpage can be enabled, as we currently do not support vSIE for huge backed guests. Once the vSIE support is added we will either drop the parameter or enable it as default. For a guest the feature has to be enabled through the new KVM_CAP_S390_HPAGE_1M capability and the hpage module parameter. Enabling it means that cmm can't be enabled for the vm and disables pfmf and storage key interpretation. This is due to the fact that in some cases, in upcoming patches, we have to split huge pages in the guest mapping to be able to set more granular memory protection on 4k pages. These split pages have fake page tables that are not visible to the Linux memory management which subsequently will not manage its PGSTEs, while the SIE will. Disabling these features lets us manage PGSTE data in a consistent matter and solve that problem. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com>
2018-07-30KVM: s390: Beautify skey enable checkJanosch Frank
Let's introduce an explicit check if skeys have already been enabled for the vcpu, so we don't have to check the mm context if we don't have the storage key facility. This lets us check for enablement without having to take the mm semaphore and thus speedup skey emulation. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-07-30KVM: s390: Add skey emulation fault handlingJanosch Frank
When doing skey emulation for huge guests, we now need to fault in pmds, as we don't have PGSTES anymore to store them when we do not have valid table entries. Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2018-07-30s390/mm: Add huge page dirty sync supportJanosch Frank
To do dirty loging with huge pages, we protect huge pmds in the gmap. When they are written to, we unprotect them and mark them dirty. We introduce the function gmap_test_and_clear_dirty_pmd which handles dirty sync for huge pages. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com>
2018-07-19KVM: s390: add etoken support for guestsChristian Borntraeger
We want to provide facility 156 (etoken facility) to our guests. This includes migration support (via sync regs) and VSIE changes. The tokens are being reset on clear reset. This has to be implemented by userspace (via sync regs). Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com>
2018-07-16KVM: s390/vsie: avoid sparse warningChristian Borntraeger
This is a non-functional change that avoids arch/s390/kvm/vsie.c:839:25: warning: context imbalance in 'do_vsie_run' - unexpected unlock Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-07-13KVM: s390: Fix storage attributes migration with memory slotsClaudio Imbrenda
This is a fix for several issues that were found in the original code for storage attributes migration. Now no bitmap is allocated to keep track of dirty storage attributes; the extra bits of the per-memslot bitmap that are always present anyway are now used for this purpose. The code has also been refactored a little to improve readability. Fixes: 190df4a212a ("KVM: s390: CMMA tracking, ESSA emulation, migration mode") Fixes: 4036e3874a1 ("KVM: s390: ioctls to get and set guest storage attributes") Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Message-Id: <1525106005-13931-3-git-send-email-imbrenda@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-07-13KVM: s390: Replace clear_user with kvm_clear_guestJanosch Frank
kvm_clear_guest also does the dirty tracking for us, which we want to have. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-06-20sched/swait: Rename to exclusivePeter Zijlstra
Since swait basically implemented exclusive waits only, make sure the API reflects that. $ git grep -l -e "\<swake_up\>" -e "\<swait_event[^ (]*" -e "\<prepare_to_swait\>" | while read file; do sed -i -e 's/\<swake_up\>/&_one/g' -e 's/\<swait_event[^ (]*/&_exclusive/g' -e 's/\<prepare_to_swait\>/&_exclusive/g' $file; done With a few manual touch-ups. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: bigeasy@linutronix.de Cc: oleg@redhat.com Cc: paulmck@linux.vnet.ibm.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180612083909.261946548@infradead.org
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "Small update for KVM: ARM: - lazy context-switching of FPSIMD registers on arm64 - "split" regions for vGIC redistributor s390: - cleanups for nested - clock handling - crypto - storage keys - control register bits x86: - many bugfixes - implement more Hyper-V super powers - implement lapic_timer_advance_ns even when the LAPIC timer is emulated using the processor's VMX preemption timer. - two security-related bugfixes at the top of the branch" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (79 commits) kvm: fix typo in flag name kvm: x86: use correct privilege level for sgdt/sidt/fxsave/fxrstor access KVM: x86: pass kvm_vcpu to kvm_read_guest_virt and kvm_write_guest_virt_system KVM: x86: introduce linear_{read,write}_system kvm: nVMX: Enforce cpl=0 for VMX instructions kvm: nVMX: Add support for "VMWRITE to any supported field" kvm: nVMX: Restrict VMX capability MSR changes KVM: VMX: Optimize tscdeadline timer latency KVM: docs: nVMX: Remove known limitations as they do not exist now KVM: docs: mmu: KVM support exposing SLAT to guests kvm: no need to check return value of debugfs_create functions kvm: Make VM ioctl do valloc for some archs kvm: Change return type to vm_fault_t KVM: docs: mmu: Fix link to NPT presentation from KVM Forum 2008 kvm: x86: Amend the KVM_GET_SUPPORTED_CPUID API documentation KVM: x86: hyperv: declare KVM_CAP_HYPERV_TLBFLUSH capability KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}_EX implementation KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE} implementation KVM: introduce kvm_make_vcpus_request_mask() API KVM: x86: hyperv: do rep check for each hypercall separately ...
2018-06-04Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timers and timekeeping updates from Thomas Gleixner: - Core infrastucture work for Y2038 to address the COMPAT interfaces: + Add a new Y2038 safe __kernel_timespec and use it in the core code + Introduce config switches which allow to control the various compat mechanisms + Use the new config switch in the posix timer code to control the 32bit compat syscall implementation. - Prevent bogus selection of CPU local clocksources which causes an endless reselection loop - Remove the extra kthread in the clocksource code which has no value and just adds another level of indirection - The usual bunch of trivial updates, cleanups and fixlets all over the place - More SPDX conversions * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) clocksource/drivers/mxs_timer: Switch to SPDX identifier clocksource/drivers/timer-imx-tpm: Switch to SPDX identifier clocksource/drivers/timer-imx-gpt: Switch to SPDX identifier clocksource/drivers/timer-imx-gpt: Remove outdated file path clocksource/drivers/arc_timer: Add comments about locking while read GFRC clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messages clocksource/drivers/sprd: Fix Kconfig dependency clocksource: Move inline keyword to the beginning of function declarations timer_list: Remove unused function pointer typedef timers: Adjust a kernel-doc comment tick: Prefer a lower rating device only if it's CPU local device clocksource: Remove kthread time: Change nanosleep to safe __kernel_* types time: Change types to new y2038 safe __kernel_* types time: Fix get_timespec64() for y2038 safe compat interfaces time: Add new y2038 safe __kernel_timespec posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME time: Introduce CONFIG_COMPAT_32BIT_TIME time: Introduce CONFIG_64BIT_TIME in architectures compat: Enable compat_get/put_timespec64 always ...
2018-06-01kvm: Change return type to vm_fault_tSouptick Joarder
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. commit 1c8f422059ae ("mm: change return type to vm_fault_t") Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-17KVM: s390: vsie: simplify < 8k address checksDavid Hildenbrand
This makes it certainly more readable. Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-05-17Merge tag 'kvm-s390-master-4.17-1'Christian Borntraeger
KVM: s390: Fix vsie handling for transactional diagnostic block vsie (nested KVM) might reject a valid input. Fix it.
2018-05-17KVM: s390: vsie: fix < 8k check for the itdbaDavid Hildenbrand
By missing an "L", we might detect some addresses to be <8k, although they are not. e.g. for itdba = 100001fff !(gpa & ~0x1fffU) -> 1 !(gpa & ~0x1fffUL) -> 0 So we would report a SIE validity intercept although everything is fine. Fixes: 166ecb3 ("KVM: s390: vsie: support transactional execution") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-05-17KVM: s390: generalize kvm_s390_get_tod_clock_ext()David Hildenbrand
Move the Multiple-epoch facility handling into it and rename it to kvm_s390_get_tod_clock(). This leaves us with: - kvm_s390_set_tod_clock() - kvm_s390_get_tod_clock() - kvm_s390_get_tod_clock_fast() So all Multiple-epoch facility is hidden in these functions. Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-05-17KVM: s390: no need to inititalize kvm->arch members to 0David Hildenbrand
KVM is allocated with kzalloc(), so these members are already 0. Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-05-17KVM: s390: introduce defines for control registersDavid Hildenbrand
In KVM code we use masks to test/set control registers. Let's define the ones we use in arch/s390/include/asm/ctl_reg.h and replace all occurrences in KVM code. As we will be needing the define for Clock-comparator sign control soon, let's also add it. Suggested-by: Collin L. Walling <walling@linux.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-05-17KVM: s390: reset crypto attributes for all vcpusTony Krowiak
Introduces a new function to reset the crypto attributes for all vcpus whether they are running or not. Each vcpu in KVM will be removed from SIE prior to resetting the crypto attributes in its SIE state description. After all vcpus have had their crypto attributes reset the vcpus will be restored to SIE. This function is incorporated into the kvm_s390_vm_set_crypto(kvm) function to fix a reported issue whereby the crypto key wrapping attributes could potentially get out of synch for running vcpus. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reported-by: Halil Pasic <pasic@linux.vnet.ibm.com> Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-05-17KVM: s390: Add storage key facility interpretation controlJanosch Frank
Up to now we always expected to have the storage key facility available for our (non-VSIE) KVM guests. For huge page support, we need to be able to disable it, so let's introduce that now. We add the use_skf variable to manage KVM storage key facility usage. Also we rename use_skey in the mm context struct to uses_skeys to make it more clear that it is an indication that the vm actively uses storage keys. Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-04-19compat: Move compat_timespec/ timeval to compat_time.hDeepa Dinamani
All the current architecture specific defines for these are the same. Refactor these common defines to a common header file. The new common linux/compat_time.h is also useful as it will eventually be used to hold all the defines that are needed for compat time types that support non y2038 safe types. New architectures need not have to define these new types as they will only use new y2038 safe syscalls. This file can be deleted after y2038 when we stop supporting non y2038 safe syscalls. The patch also requires an operation similar to: git grep "asm/compat\.h" | cut -d ":" -f 1 | xargs -n 1 sed -i -e "s%asm/compat.h%linux/compat.h%g" Cc: acme@kernel.org Cc: benh@kernel.crashing.org Cc: borntraeger@de.ibm.com Cc: catalin.marinas@arm.com Cc: cmetcalf@mellanox.com Cc: cohuck@redhat.com Cc: davem@davemloft.net Cc: deller@gmx.de Cc: devel@driverdev.osuosl.org Cc: gerald.schaefer@de.ibm.com Cc: gregkh@linuxfoundation.org Cc: heiko.carstens@de.ibm.com Cc: hoeppner@linux.vnet.ibm.com Cc: hpa@zytor.com Cc: jejb@parisc-linux.org Cc: jwi@linux.vnet.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: mark.rutland@arm.com Cc: mingo@redhat.com Cc: mpe@ellerman.id.au Cc: oberpar@linux.vnet.ibm.com Cc: oprofile-list@lists.sf.net Cc: paulus@samba.org Cc: peterz@infradead.org Cc: ralf@linux-mips.org Cc: rostedt@goodmis.org Cc: rric@kernel.org Cc: schwidefsky@de.ibm.com Cc: sebott@linux.vnet.ibm.com Cc: sparclinux@vger.kernel.org Cc: sth@linux.vnet.ibm.com Cc: ubraun@linux.vnet.ibm.com Cc: will.deacon@arm.com Cc: x86@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: James Hogan <jhogan@kernel.org> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-14KVM: s390: provide counters for all interrupt injects/deliveryChristian Borntraeger
For testing the exitless interrupt support it turned out useful to have separate counters for inject and delivery of I/O interrupt. While at it do the same for all interrupt types. For timer related interrupts (clock comparator and cpu timer) we even had no delivery counters. Fix this as well. On this way some counters are being renamed to have a similar name. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2018-03-14KVM: add machine check counter to kvm_statQingFeng Hao
This counter can be used for administration, debug or test purposes. Suggested-by: Vladislav Mironov <mironov@de.ibm.com> Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-03-14KVM: s390: fix fallthrough annotationSebastian Ott
A case statement in kvm_s390_shadow_tables uses fallthrough annotations which are not recognized by gcc because they are hidden within a block. Move these annotations out of the block to fix (W=1) warnings like below: arch/s390/kvm/gaccess.c: In function 'kvm_s390_shadow_tables': arch/s390/kvm/gaccess.c:1029:26: warning: this statement may fall through [-Wimplicit-fallthrough=] case ASCE_TYPE_REGION1: { ^ Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-03-14KVM: s390: add exit io request stats and simplify codeChristian Borntraeger
We want to count IO exit requests in kvm_stat. At the same time we can get rid of the handle_noop function. Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-03-09KVM: s390: Refactor host cmma and pfmfi interpretation controlsJanosch Frank
use_cmma in kvm_arch means that the KVM hypervisor is allowed to use cmma, whereas use_cmma in the mm context means cmm has been used before. Let's rename the context one to uses_cmm, as the vm does use collaborative memory management but the host uses the cmm assist (interpretation facility). Also let's introduce use_pfmfi, so we can remove the pfmfi disablement when we activate cmma and rather not activate it in the first place. Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Message-Id: <1518779775-256056-2-git-send-email-frankja@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-03-09KVM: s390: implement CPU model only facilitiesChristian Borntraeger
Some facilities should only be provided to the guest, if they are enabled by a CPU model. This allows us to avoid capabilities and to simply fall back to the cpumodel for deciding about a facility without enabling it for older QEMUs or QEMUs without a CPU model. Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-03-06KVM: s390: fix memory overwrites when not using SCA entriesDavid Hildenbrand
Even if we don't have extended SCA support, we can have more than 64 CPUs if we don't enable any HW features that might use the SCA entries. Now, this works just fine, but we missed a return, which is why we would actually store the SCA entries. If we have more than 64 CPUs, this means writing outside of the basic SCA - bad. Let's fix this. This allows > 64 CPUs when running nested (under vSIE) without random crashes. Fixes: a6940674c384 ("KVM: s390: allow 255 VCPUs when sca entries aren't used") Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180306132758.21034-1-david@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-03-01KVM: s390: provide io interrupt kvm_statChristian Borntraeger
We already count io interrupts, but we forgot to print them. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: d8346b7d9b ("KVM: s390: Support for I/O interrupts.") Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-02-20KVM: s390: provide only a single function for setting the tod (fix SCK)David Hildenbrand
Right now, SET CLOCK called in the guest does not properly take care of the epoch index, as the call goes via the old kvm_s390_set_tod_clock() interface. So the epoch index is neither reset to 0, if required, nor properly set to e.g. 0xff on negative values. Fix this by providing a single kvm_s390_set_tod_clock() function. Move Multiple-epoch facility handling into it. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180207114647.6220-3-david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support") Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-02-20KVM: s390: consider epoch index on TOD clock syncsDavid Hildenbrand
For now, we don't take care of over/underflows. Especially underflows are critical: Assume the epoch is currently 0 and we get a sync request for delta=1, meaning the TOD is moved forward by 1 and we have to fix it up by subtracting 1 from the epoch. Right now, this will leave the epoch index untouched, resulting in epoch=-1, epoch_idx=0, which is wrong. We have to take care of over and underflows, also for the VSIE case. So let's factor out calculation into a separate function. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180207114647.6220-5-david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support") Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [use u8 for idx]
2018-02-20KVM: s390: consider epoch index on hotplugged CPUsDavid Hildenbrand
We must copy both, the epoch and the epoch_idx. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180207114647.6220-4-david@redhat.com> Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support") Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support") Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-02-20KVM: s390: take care of clock-comparator sign controlDavid Hildenbrand
Missed when enabling the Multiple-epoch facility. If the facility is installed and the control is set, a sign based comaprison has to be performed. Right now we would inject wrong interrupts and ignore interrupt conditions. Also the sleep time is calculated in a wrong way. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180207114647.6220-2-david@redhat.com> Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support") Cc: stable@vger.kernel.org Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-02-14KVM: s390: use switch vs jump table in interrupt.cDavid Hildenbrand
Just like for the interception handlers, let's also use a switch-case in our interrupt delivery code. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180206141743.24497-1-david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-02-14KVM: s390: use switch vs jump table in intercept.cChristian Borntraeger
Instead of having huge jump tables for function selection, let's use normal switch/case statements for the instruction handlers in intercept.c We can now also get rid of intercept_handler_t. This allows the compiler to make the right decision depending on the situation (e.g. avoid jump-tables for thunks). Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-20 02:18:19 +0000