| Age | Commit message (Collapse) | Author |
|---|
|
This is the 4.19.122 stable release
# gpg: Signature made Sun 10 May 2020 04:30:13 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.119 stable release
# gpg: Signature made Wed 29 Apr 2020 10:31:36 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.118 stable release
# gpg: Signature made Thu 23 Apr 2020 04:35:02 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.116 stable release
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
commit dead1c845dbe97e0061dae2017eaf3bd8f8f06ee upstream.
The pseries platform uses the PCI_PROBE_DEVTREE method of PCI probing
which reads "assigned-addresses" of every PCI device and initializes
the device resources. However if the property is missing or zero sized,
then there is no fallback of any kind and the PCI resources remain
undiscovered, i.e. pdev->resource[] array remains empty.
This adds a fallback which parses the "reg" property in pretty much same
way except it marks resources as "unset" which later make Linux assign
those resources proper addresses.
This has an effect when:
1. a hypervisor failed to assign any resource for a device;
2. /chosen/linux,pci-probe-only=0 is in the DT so the system may try
assigning a resource.
Neither is likely to happen under PowerVM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 94c0b013c98583614e1ad911e8795ca36da34a85 upstream.
If {i,d}-cache-block-size is set and {i,d}-cache-line-size is not, use
the block-size value for both. Per the devicetree spec cache-line-size
is only needed if it differs from the block size.
Originally the code would fallback from block size to line size. An
error message was printed if both properties were missing.
Later the code was refactored to use clearer names and logic but it
inadvertently made line size a required property, meaning on systems
without a line size property we fall back to the default from the
cputable.
On powernv (OPAL) platforms, since the introduction of device tree CPU
features (5a61ef74f269 ("powerpc/64s: Support new device tree binding
for discovering CPU features")), that has led to the wrong value being
used, as the fallback value is incorrect for Power8/Power9 CPUs.
The incorrect values flow through to the VDSO and also to the sysconf
values, SC_LEVEL1_ICACHE_LINESIZE etc.
Fixes: bd067f83b084 ("powerpc/64: Fix naming of cache block vs. cache line")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reported-by: Qian Cai <cai@lca.pw>
[mpe: Add even more detail to change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200416221908.7886-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
enabled"
[ Upstream commit abc3fce76adbdfa8f87272c784b388cd20b46049 ]
This reverts commit ebb37cf3ffd39fdb6ec5b07111f8bb2f11d92c5f.
That commit does not play well with soft-masked irq state
manipulations in idle, interrupt replay, and possibly others due to
tracing code sometimes using irq_work_queue (e.g., in
trace_hardirqs_on()). That can cause PACA_IRQ_DEC to become set when
it is not expected, and be ignored or cleared or cause warnings.
The net result seems to be missing an irq_work until the next timer
interrupt in the worst case which is usually not going to be noticed,
however it could be a long time if the tick is disabled, which is
against the spirit of irq_work and might cause real problems.
The idea is still solid, but it would need more work. It's not really
clear if it would be worth added complexity, so revert this for
now (not a straight revert, but replace with a comment explaining why
we might see interrupts happening, and gives git blame something to
find).
Fixes: ebb37cf3ffd3 ("powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200402120401.1115883-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit af6cf95c4d003fccd6c2ecc99a598fb854b537e7 ]
When building ppc64 defconfig, Clang errors (trimmed for brevity):
arch/powerpc/platforms/maple/setup.c:365:1: error: attribute declaration
must precede definition [-Werror,-Wignored-attributes]
machine_device_initcall(maple, maple_cpc925_edac_setup);
^
machine_device_initcall expands to __define_machine_initcall, which in
turn has the macro machine_is used in it, which declares mach_##name
with an __attribute__((weak)). define_machine actually defines
mach_##name, which in this file happens before the declaration, hence
the warning.
To fix this, move define_machine after machine_device_initcall so that
the declaration occurs before the definition, which matches how
machine_device_initcall and define_machine work throughout
arch/powerpc.
While we're here, remove some spaces before tabs.
Fixes: 8f101a051ef0 ("edac: cpc925 MC platform device setup")
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200323222729.15365-1-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aa4113340ae6c2811e046f08c2bc21011d20a072 ]
In the current implementation, the call to loadcam_multi() is wrapped
between switch_to_as1() and restore_to_as0() calls so, when it tries
to create its own temporary AS=1 TLB1 entry, it ends up duplicating
the existing one created by switch_to_as1(). Add a check to skip
creating the temporary entry if already running in AS=1.
Fixes: d9e1831a4202 ("powerpc/85xx: Load all early TLB entries at once")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200123111914.2565-1-laurentiu.tudor@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c17eb4dca5a353a9dbbb8ad6934fe57af7165e91 upstream.
Declaring setjmp()/longjmp() as taking longs makes the signature
non-standard, and makes clang complain. In the past, this has been
worked around by adding -ffreestanding to the compile flags.
The implementation looks like it only ever propagates the value
(in longjmp) or sets it to 1 (in setjmp), and we only call longjmp
with integer parameters.
This allows removing -ffreestanding from the compilation flags.
Fixes: c9029ef9c957 ("powerpc: Avoid clang warnings around setjmp and longjmp")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Clement Courbet <courbet@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200330080400.124803-1-courbet@google.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aa497d4352414aad22e792b35d0aaaa12bbc37c5 upstream.
The setjmp function should be declared as "returns_twice", or bad
things can happen[1]. This does not actually change generated code in
my testing.
The longjmp function should be declared as "noreturn", so that the
compiler can optimise calls to it better. This makes the generated
code a little shorter.
1: https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html#index-returns_005ftwice-function-attribute
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c02ce4a573f3bac907e2c70957a2d1275f910013.1567605586.git.segher@kernel.crashing.org
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 21f8b2fa3ca5b01f7a2b51b89ce97a3705a15aa0 upstream.
When a program check exception happens while MMU translation is
disabled, following Oops happens in kprobe_handler() in the following
code:
} else if (*addr != BREAKPOINT_INSTRUCTION) {
BUG: Unable to handle kernel data access on read at 0x0000e268
Faulting instruction address: 0xc000ec34
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=16K PREEMPT CMPC885
Modules linked in:
CPU: 0 PID: 429 Comm: cat Not tainted 5.6.0-rc1-s3k-dev-00824-g84195dc6c58a #3267
NIP: c000ec34 LR: c000ecd8 CTR: c019cab8
REGS: ca4d3b58 TRAP: 0300 Not tainted (5.6.0-rc1-s3k-dev-00824-g84195dc6c58a)
MSR: 00001032 <ME,IR,DR,RI> CR: 2a4d3c52 XER: 00000000
DAR: 0000e268 DSISR: c0000000
GPR00: c000b09c ca4d3c10 c66d0620 00000000 ca4d3c60 00000000 00009032 00000000
GPR08: 00020000 00000000 c087de44 c000afe0 c66d0ad0 100d3dd6 fffffff3 00000000
GPR16: 00000000 00000041 00000000 ca4d3d70 00000000 00000000 0000416d 00000000
GPR24: 00000004 c53b6128 00000000 0000e268 00000000 c07c0000 c07bb6fc ca4d3c60
NIP [c000ec34] kprobe_handler+0x128/0x290
LR [c000ecd8] kprobe_handler+0x1cc/0x290
Call Trace:
[ca4d3c30] [c000b09c] program_check_exception+0xbc/0x6fc
[ca4d3c50] [c000e43c] ret_from_except_full+0x0/0x4
--- interrupt: 700 at 0xe268
Instruction dump:
913e0008 81220000 38600001 3929ffff 91220000 80010024 bb410008 7c0803a6
38210020 4e800020 38600000 4e800020 <813b0000> 6d2a7fe0 2f8a0008 419e0154
---[ end trace 5b9152d4cdadd06d ]---
kprobe is not prepared to handle events in real mode and functions
running in real mode should have been blacklisted, so kprobe_handler()
can safely bail out telling 'this trap is not mine' for any trap that
happened while in real-mode.
If the trap happened with MSR_IR or MSR_DR cleared, return 0
immediately.
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Fixes: 6cc89bad60a6 ("powerpc/kprobes: Invoke handlers directly")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/424331e2006e7291a1bfe40e7f3fa58825f565e1.1582054578.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b1a504a6500df50e83b701b7946b34fce27ad8a3 upstream.
When a CPU is brought up, an IPI number is allocated and recorded
under the XIVE CPU structure. Invalid IPI numbers are tracked with
interrupt number 0x0.
On the PowerNV platform, the interrupt number space starts at 0x10 and
this works fine. However, on the sPAPR platform, it is possible to
allocate the interrupt number 0x0 and this raises an issue when CPU 0
is unplugged. The XIVE spapr driver tracks allocated interrupt numbers
in a bitmask and it is not correctly updated when interrupt number 0x0
is freed. It stays allocated and it is then impossible to reallocate.
Fix by using the XIVE_BAD_IRQ value instead of zero on both platforms.
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200306150143.5551-2-clg@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
entries
commit 36b78402d97a3b9aeab136feb9b00d8647ec2c20 upstream.
H_PAGE_THP_HUGE is used to differentiate between a THP hugepage and
hugetlb hugepage entries. The difference is WRT how we handle hash
fault on these address. THP address enables MPSS in segments. We want
to manage devmap hugepage entries similar to THP pt entries. Hence use
H_PAGE_THP_HUGE for devmap huge PTE entries.
With current code while handling hash PTE fault, we do set is_thp =
true when finding devmap PTE huge PTE entries.
Current code also does the below sequence we setting up huge devmap
entries.
entry = pmd_mkhuge(pfn_t_pmd(pfn, prot));
if (pfn_t_devmap(pfn))
entry = pmd_mkdevmap(entry);
In that case we would find both H_PAGE_THP_HUGE and PAGE_DEVMAP set
for huge devmap PTE entries. This results in false positive error like
below.
kernel BUG at /home/kvaneesh/src/linux/mm/memory.c:4321!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 56 PID: 67996 Comm: t_mmap_dio Not tainted 5.6.0-rc4-59640-g371c804dedbc #128
....
NIP [c00000000044c9e4] __follow_pte_pmd+0x264/0x900
LR [c0000000005d45f8] dax_writeback_one+0x1a8/0x740
Call Trace:
str_spec.74809+0x22ffb4/0x2d116c (unreliable)
dax_writeback_one+0x1a8/0x740
dax_writeback_mapping_range+0x26c/0x700
ext4_dax_writepages+0x150/0x5a0
do_writepages+0x68/0x180
__filemap_fdatawrite_range+0x138/0x180
file_write_and_wait_range+0xa4/0x110
ext4_sync_file+0x370/0x6e0
vfs_fsync_range+0x70/0xf0
sys_msync+0x220/0x2e0
system_call+0x5c/0x68
This is because our pmd_trans_huge check doesn't exclude _PAGE_DEVMAP.
To make this all consistent, update pmd_mkdevmap to set
H_PAGE_THP_HUGE and pmd_trans_huge check now excludes _PAGE_DEVMAP
correctly.
Fixes: ebd31197931d ("powerpc/mm: Add devmap support for ppc64")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200313094842.351830-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c7def7fbdeaa25feaa19caf4a27c5d10bd8789e4 upstream.
In restore_tm_sigcontexts() we take the trap value directly from the
user sigcontext with no checking:
err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]);
This means we can be in the kernel with an arbitrary regs->trap value.
Although that's not immediately problematic, there is a risk we could
trigger one of the uses of CHECK_FULL_REGS():
#define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1)
It can also cause us to unnecessarily save non-volatile GPRs again in
save_nvgprs(), which shouldn't be problematic but is still wrong.
It's also possible it could trick the syscall restart machinery, which
relies on regs->trap not being == 0xc00 (see 9a81c16b5275 ("powerpc:
fix double syscall restarts")), though I haven't been able to make
that happen.
Finally it doesn't match the behaviour of the non-TM case, in
restore_sigcontext() which zeroes regs->trap.
So change restore_tm_sigcontexts() to zero regs->trap.
This was discovered while testing Nick's upcoming rewrite of the
syscall entry path. In that series the call to save_nvgprs() prior to
signal handling (do_notify_resume()) is removed, which leaves the
low-bit of regs->trap uncleared which can then trigger the FULL_REGS()
WARNs in setup_tm_sigcontexts().
Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200401023836.3286664-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 53a712bae5dd919521a58d7bad773b949358add0 upstream.
In order to implement KUAP (Kernel Userspace Access Protection) on
Power9 we will be using the AMR, and therefore indirectly the
UAMOR/AMOR.
So save/restore these regs in the idle code.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[ajd: Backport to 4.19 tree, CVE-2020-11669]
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a83836dbc53e96f13fec248ecc201d18e1e3111d upstream.
In guests without hotplugagble memory drmem structure is only zero
initialized. Trying to manipulate DLPAR parameters results in a crash.
$ echo "memory add count 1" > /sys/kernel/dlpar
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
...
NIP: c0000000000ff294 LR: c0000000000ff248 CTR: 0000000000000000
REGS: c0000000fb9d3880 TRAP: 0300 Tainted: G E (5.5.0-rc6-2-default)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 28242428 XER: 20000000
CFAR: c0000000009a6c10 DAR: 0000000000000010 DSISR: 40000000 IRQMASK: 0
...
NIP dlpar_memory+0x6e4/0xd00
LR dlpar_memory+0x698/0xd00
Call Trace:
dlpar_memory+0x698/0xd00 (unreliable)
handle_dlpar_errorlog+0xc0/0x190
dlpar_store+0x198/0x4a0
kobj_attr_store+0x30/0x50
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
__vfs_write+0x3c/0x70
vfs_write+0xd0/0x260
ksys_write+0xdc/0x130
system_call+0x5c/0x68
Taking closer look at the code, I can see that for_each_drmem_lmb is a
macro expanding into `for (lmb = &drmem_info->lmbs[0]; lmb <=
&drmem_info->lmbs[drmem_info->n_lmbs - 1]; lmb++)`. When drmem_info->lmbs
is NULL, the loop would iterate through the whole address range if it
weren't stopped by the NULL pointer dereference on the next line.
This patch aligns for_each_drmem_lmb and for_each_drmem_lmb_in_range
macro behavior with the common C semantics, where the end marker does
not belong to the scanned range, and alters get_lmb_range() semantics.
As a side effect, the wraparound observed in the crash is prevented.
Fixes: 6c6ea53725b3 ("powerpc/mm: Separate ibm, dynamic-memory data from DT format")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200131132829.10281-1-msuchanek@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 11dd34f3eae5a468013bb161a1dcf1fecd2ca321 upstream.
There is no need to have the 'struct dentry *vpa_dir' variable static
since new value always be assigned before use it.
Fixes: c6c26fb55e8e ("powerpc/pseries: Export raw per-CPU VPA data via debugfs")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190218125644.87448-1-yuehaibing@huawei.com
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the 4.19.113 stable release
# gpg: Signature made Wed 25 Mar 2020 03:24:36 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
[ Upstream commit cb0cc635c7a9fa8a3a0f75d4d896721819c63add ]
Selecting CONFIG_DEBUG_INFO_BTF results in the below warning from ld:
ld: warning: orphan section `.BTF' from `.btf.vmlinux.bin.o' being placed in section `.BTF'
Include .BTF section in vmlinux explicitly to fix the same.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200220113132.857132-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This is the 4.19.109 stable release
# gpg: Signature made Wed 11 Mar 2020 09:15:34 AM EDT
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.107 stable release
# gpg: Signature made Fri 28 Feb 2020 10:39:01 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.106 stable release
# gpg: Signature made Mon 24 Feb 2020 02:35:24 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.104 stable release
# gpg: Signature made Fri 14 Feb 2020 04:33:28 PM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.103 stable release
# gpg: Signature made Tue 11 Feb 2020 07:34:20 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.102 stable release
# gpg: Signature made Wed 05 Feb 2020 09:44:34 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.100 stable release
# gpg: Signature made Wed 29 Jan 2020 10:44:17 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.99 stable release
# gpg: Signature made Mon 27 Jan 2020 08:51:23 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.97 stable release
# gpg: Signature made Fri 17 Jan 2020 01:47:17 PM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.95 stable release
# gpg: Signature made Sun 12 Jan 2020 06:17:30 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.94 stable release
# gpg: Signature made Thu 09 Jan 2020 04:19:10 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.93 stable release
# gpg: Signature made Sat 04 Jan 2020 01:15:12 PM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.92 stable release
# gpg: Signature made Tue 31 Dec 2019 10:40:08 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.90 stable release
# gpg: Signature made Tue 17 Dec 2019 02:58:53 PM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.89 stable release
# gpg: Signature made Fri 13 Dec 2019 02:53:00 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
This is the 4.19.88 stable release
# gpg: Signature made Thu 05 Dec 2019 03:38:25 AM EST
# gpg: using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key
|
|
commit fc37a1632d40c80c067eb1bc235139f5867a2667 upstream.
PowerVM systems running compatibility mode on a few Power8 revisions are
still vulnerable to the hardware defect that loses PMU exceptions arriving
prior to a context switch.
The software fix for this issue is enabled through the CPU_FTR_PMAO_BUG
cpu_feature bit, nevertheless this bit also needs to be set for PowerVM
compatibility mode systems.
Fixes: 68f2f0d431d9ea4 ("powerpc: Add a cpu feature CPU_FTR_PMAO_BUG")
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200227134715.9715-1-desnesn@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2464cc4c345699adea52c7aef75707207cb8a2f6 upstream.
After a treclaim, we expect to be in non-transactional state. If we
don't clear the current thread's MSR[TS] before we get preempted, then
tm_recheckpoint_new_task() will recheckpoint and we get rescheduled in
suspended transaction state.
When handling a signal caught in transactional state,
handle_rt_signal64() calls get_tm_stackpointer() that treclaims the
transaction using tm_reclaim_current() but without clearing the
thread's MSR[TS]. This can cause the TM Bad Thing exception below if
later we pagefault and get preempted trying to access the user's
sigframe, using __put_user(). Afterwards, when we are rescheduled back
into do_page_fault() (but now in suspended state since the thread's
MSR[TS] was not cleared), upon executing 'rfid' after completion of
the page fault handling, the exception is raised because a transition
from suspended to non-transactional state is invalid.
Unexpected TM Bad Thing exception at c00000000000de44 (msr 0x8000000302a03031) tm_scratch=800000010280b033
Oops: Unrecoverable exception, sig: 6 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
CPU: 25 PID: 15547 Comm: a.out Not tainted 5.4.0-rc2 #32
NIP: c00000000000de44 LR: c000000000034728 CTR: 0000000000000000
REGS: c00000003fe7bd70 TRAP: 0700 Not tainted (5.4.0-rc2)
MSR: 8000000302a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[SE]> CR: 44000884 XER: 00000000
CFAR: c00000000000dda4 IRQMASK: 0
PACATMSCRATCH: 800000010280b033
GPR00: c000000000034728 c000000f65a17c80 c000000001662800 00007fffacf3fd78
GPR04: 0000000000001000 0000000000001000 0000000000000000 c000000f611f8af0
GPR08: 0000000000000000 0000000078006001 0000000000000000 000c000000000000
GPR12: c000000f611f84b0 c00000003ffcb200 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000f611f8140
GPR24: 0000000000000000 00007fffacf3fd68 c000000f65a17d90 c000000f611f7800
GPR28: c000000f65a17e90 c000000f65a17e90 c000000001685e18 00007fffacf3f000
NIP [c00000000000de44] fast_exception_return+0xf4/0x1b0
LR [c000000000034728] handle_rt_signal64+0x78/0xc50
Call Trace:
[c000000f65a17c80] [c000000000034710] handle_rt_signal64+0x60/0xc50 (unreliable)
[c000000f65a17d30] [c000000000023640] do_notify_resume+0x330/0x460
[c000000f65a17e20] [c00000000000dcc4] ret_from_except_lite+0x70/0x74
Instruction dump:
7c4ff120 e8410170 7c5a03a6 38400000 f8410060 e8010070 e8410080 e8610088
60000000 60000000 e8810090 e8210078 <4c000024> 48000000 e8610178 88ed0989
---[ end trace 93094aa44b442f87 ]---
The simplified sequence of events that triggers the above exception is:
... # userspace in NON-TRANSACTIONAL state
tbegin # userspace in TRANSACTIONAL state
signal delivery # kernelspace in SUSPENDED state
handle_rt_signal64()
get_tm_stackpointer()
treclaim # kernelspace in NON-TRANSACTIONAL state
__put_user()
page fault happens. We will never get back here because of the TM Bad Thing exception.
page fault handling kicks in and we voluntarily preempt ourselves
do_page_fault()
__schedule()
__switch_to(other_task)
our task is rescheduled and we recheckpoint because the thread's MSR[TS] was not cleared
__switch_to(our_task)
switch_to_tm()
tm_recheckpoint_new_task()
trechkpt # kernelspace in SUSPENDED state
The page fault handling resumes, but now we are in suspended transaction state
do_page_fault() completes
rfid <----- trying to get back where the page fault happened (we were non-transactional back then)
TM Bad Thing # illegal transition from suspended to non-transactional
This patch fixes that issue by clearing the current thread's MSR[TS]
just after treclaim in get_tm_stackpointer() so that we stay in
non-transactional state in case we are preempted. In order to make
treclaim and clearing the thread's MSR[TS] atomic from a preemption
perspective when CONFIG_PREEMPT is set, preempt_disable/enable() is
used. It's also necessary to save the previous value of the thread's
MSR before get_tm_stackpointer() is called so that it can be exposed
to the signal handler later in setup_tm_sigcontexts() to inform the
userspace MSR at the moment of the signal delivery.
Found with tm-signal-context-force-tm kernel selftest.
Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context")
Cc: stable@vger.kernel.org # v3.9
Signed-off-by: Gustavo Luiz Duarte <gustavold@linux.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200211033831.11165-1-gustavold@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1fb4124ca9d456656a324f1ee29b7bf942f59ac8 ]
When disabling virtual functions on an SR-IOV adapter we currently do not
correctly remove the EEH state for the now-dead virtual functions. When
removing the pci_dn that was created for the VF when SR-IOV was enabled
we free the corresponding eeh_dev without removing it from the child device
list of the eeh_pe that contained it. This can result in crashes due to the
use-after-free.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Tested-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190821062655.19735-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 965c94f309be58fbcc6c8d3e4f123376c5970d79 ]
An ioda_pe for each VF is allocated in pnv_pci_sriov_enable() before
the pci_dev for the VF is created. We need to set the pe->pdev pointer
at some point after the pci_dev is created. Currently we do that in:
pcibios_bus_add_device()
pnv_pci_dma_dev_setup() (via phb->ops.dma_dev_setup)
/* fixup is done here */
pnv_pci_ioda_dma_dev_setup() (via pnv_phb->dma_dev_setup)
The fixup needs to be done before setting up DMA for for the VF's PE,
but there's no real reason to delay it until this point. Move the
fixup into pnv_pci_ioda_fixup_iov() so the ordering is:
pcibios_add_device()
pnv_pci_ioda_fixup_iov() (via ppc_md.pcibios_fixup_sriov)
pcibios_bus_add_device()
...
This isn't strictly required, but it's a slightly more logical place
to do the fixup and it simplifies pnv_pci_dma_dev_setup().
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200110070207.439-4-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3b5b9997b331e77ce967eba2c4bc80dc3134a7fe ]
On pseries there is a bug with adding hotplugged devices to an IOMMU
group. For a number of dumb reasons fixing that bug first requires
re-working how VFs are configured on PowerNV. For background, on
PowerNV we use the pcibios_sriov_enable() hook to do two things:
1. Create a pci_dn structure for each of the VFs, and
2. Configure the PHB's internal BARs so the MMIO range for each VF
maps to a unique PE.
Roughly speaking a PE is the hardware counterpart to a Linux IOMMU
group since all the devices in a PE share the same IOMMU table. A PE
also defines the set of devices that should be isolated in response to
a PCI error (i.e. bad DMA, UR/CA, AER events, etc). When isolated all
MMIO and DMA traffic to and from devicein the PE is blocked by the
root complex until the PE is recovered by the OS.
The requirement to block MMIO causes a giant headache because the P8
PHB generally uses a fixed mapping between MMIO addresses and PEs. As
a result we need to delay configuring the IOMMU groups for device
until after MMIO resources are assigned. For physical devices (i.e.
non-VFs) the PE assignment is done in pcibios_setup_bridge() which is
called immediately after the MMIO resources for downstream
devices (and the bridge's windows) are assigned. For VFs the setup is
more complicated because:
a) pcibios_setup_bridge() is not called again when VFs are activated, and
b) The pci_dev for VFs are created by generic code which runs after
pcibios_sriov_enable() is called.
The work around for this is a two step process:
1. A fixup in pcibios_add_device() is used to initialised the cached
pe_number in pci_dn, then
2. A bus notifier then adds the device to the IOMMU group for the PE
specified in pci_dn->pe_number.
A side effect fixing the pseries bug mentioned in the first paragraph
is moving the fixup out of pcibios_add_device() and into
pcibios_bus_add_device(), which is called much later. This results in
step 2. failing because pci_dn->pe_number won't be initialised when
the bus notifier is run.
We can fix this by removing the need for the fixup. The PE for a VF is
known before the VF is even scanned so we can initialise
pci_dn->pe_number pcibios_sriov_enable() instead. Unfortunately,
moving the initialisation causes two problems:
1. We trip the WARN_ON() in the current fixup code, and
2. The EEH core clears pdn->pe_number when recovering a VF and
relies on the fixup to correctly re-set it.
The only justification for either of these is a comment in
eeh_rmv_device() suggesting that pdn->pe_number *must* be set to
IODA_INVALID_PE in order for the VF to be scanned. However, this
comment appears to have no basis in reality. Both bugs can be fixed by
just deleting the code.
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191028085424.12006-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
for DDW
commit 7559d3d295f3365ea7ac0c0274c05e633fe4f594 upstream.
By default a pseries guest supports a H_PUT_TCE hypercall which maps
a single IOMMU page in a DMA window. Additionally the hypervisor may
support H_PUT_TCE_INDIRECT/H_STUFF_TCE which update multiple TCEs at once;
this is advertised via the device tree /rtas/ibm,hypertas-functions
property which Linux converts to FW_FEATURE_MULTITCE.
FW_FEATURE_MULTITCE is checked when dma_iommu_ops is used; however
the code managing the huge DMA window (DDW) ignores it and calls
H_PUT_TCE_INDIRECT even if it is explicitly disabled via
the "multitce=off" kernel command line parameter.
This adds FW_FEATURE_MULTITCE checking to the DDW code path.
This changes tce_build_pSeriesLP to take liobn and page size as
the huge window does not have iommu_table descriptor which usually
the place to store these numbers.
Fixes: 4e8b0cf46b25 ("powerpc/pseries: Add support for dynamic dma windows")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191216041924.42318-3-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aff8c8242bc638ba57247ae1ec5f272ac3ed3b92 upstream.
Commit e5afdf9dd515 ("powerpc/vfio_spapr_tce: Add reference counting to
iommu_table") missed an iommu_table allocation in the pseries vio code.
The iommu_table is allocated with kzalloc and as a result the associated
kref gets a value of zero. This has the side effect that during a DLPAR
remove of the associated virtual IOA the iommu_tce_table_put() triggers
a use-after-free underflow warning.
Call Trace:
[c0000002879e39f0] [c00000000071ecb4] refcount_warn_saturate+0x184/0x190
(unreliable)
[c0000002879e3a50] [c0000000000500ac] iommu_tce_table_put+0x9c/0xb0
[c0000002879e3a70] [c0000000000f54e4] vio_dev_release+0x34/0x70
[c0000002879e3aa0] [c00000000087cfa4] device_release+0x54/0xf0
[c0000002879e3b10] [c000000000d64c84] kobject_cleanup+0xa4/0x240
[c0000002879e3b90] [c00000000087d358] put_device+0x28/0x40
[c0000002879e3bb0] [c0000000007a328c] dlpar_remove_slot+0x15c/0x250
[c0000002879e3c50] [c0000000007a348c] remove_slot_store+0xac/0xf0
[c0000002879e3cd0] [c000000000d64220] kobj_attr_store+0x30/0x60
[c0000002879e3cf0] [c0000000004ff13c] sysfs_kf_write+0x6c/0xa0
[c0000002879e3d10] [c0000000004fde4c] kernfs_fop_write+0x18c/0x260
[c0000002879e3d60] [c000000000410f3c] __vfs_write+0x3c/0x70
[c0000002879e3d80] [c000000000415408] vfs_write+0xc8/0x250
[c0000002879e3dd0] [c0000000004157dc] ksys_write+0x7c/0x120
[c0000002879e3e20] [c00000000000b278] system_call+0x5c/0x68
Further, since the refcount was always zero the iommu_tce_table_put()
fails to call the iommu_table release function resulting in a leak.
Fix this issue be initilizing the iommu_table kref immediately after
allocation.
Fixes: e5afdf9dd515 ("powerpc/vfio_spapr_tce: Add reference counting to iommu_table")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1579558202-26052-1-git-send-email-tyreld@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c3aae14e5d468d18dbb5d7c0c8c7e2968cc14aad upstream.
Clang warns:
../arch/powerpc/boot/4xx.c:231:3: warning: misleading indentation;
statement is not part of the previous 'else' [-Wmisleading-indentation]
val = SDRAM0_READ(DDR0_42);
^
../arch/powerpc/boot/4xx.c:227:2: note: previous statement is here
else
^
This is because there is a space at the beginning of this line; remove
it so that the indentation is consistent according to the Linux kernel
coding style and clang no longer warns.
Fixes: d23f5099297c ("[POWERPC] 4xx: Adds decoding of 440SPE memory size to boot wrapper library")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/780
Link: https://lore.kernel.org/r/20191209200338.12546-1-natechancellor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cb10bf9194f4d2c5d830eddca861f7ca0fecdbb4 upstream.
Explicitly free the shared page if kvmppc_mmu_init() fails during
kvmppc_core_vcpu_create(), as the page is freed only in
kvmppc_core_vcpu_free(), which is not reached via kvm_vcpu_uninit().
Fixes: 96bc451a15329 ("KVM: PPC: Introduce shared page")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1a978d9d3e72ddfa40ac60d26301b154247ee0bc upstream.
Call kvm_vcpu_uninit() if vcore creation fails to avoid leaking any
resources allocated by kvm_vcpu_init(), i.e. the vcpu->run page.
Fixes: 371fefd6f2dc4 ("KVM: PPC: Allow book3s_hv guests to use SMT processor modes")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dabf6b36b83a18d57e3d4b9d50544ed040d86255 upstream.
There's an OF helper called of_dma_is_coherent(), which checks if a
device has a "dma-coherent" property to see if the device is coherent
for DMA.
But on some platforms devices are coherent by default, and on some
platforms it's not possible to update existing device trees to add the
"dma-coherent" property.
So add a Kconfig symbol to allow arch code to tell
of_dma_is_coherent() that devices are coherent by default, regardless
of the presence of the property.
Select that symbol on powerpc when NOT_COHERENT_CACHE is not set, ie.
when the system has a coherent cache.
Fixes: 92ea637edea3 ("of: introduce of_dma_is_coherent() helper")
Cc: stable@vger.kernel.org # v3.16+
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fbee6ba2dca30d302efe6bddb3a886f5e964a257 upstream.
In lmb_is_removable(), if a section is not present, it should continue
to test the rest of the sections in the block. But the current code
fails to do so.
Fixes: 51925fb3c5c9 ("powerpc/pseries: Implement memory hotplug remove in the kernel")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1578632042-12415-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c2a20711fc181e7f22ee5c16c28cb9578af84729 upstream.
ASDR is HV-privileged and must only be accessed in HV-mode.
Fixes a Program Check (0x700) when xmon in a VM dumps SPRs.
Fixes: d1e1b351f50f ("powerpc/xmon: Add ISA v3.0 SPRs to SPR dump")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200107021633.GB29843@us.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 73d527aef68f7644e59f22ce7f9ac75e7b533aea ]
Add fsl,erratum-a011043 to internal MDIO buses.
Software may get false read error when reading internal
PCS registers through MDIO. As a workaround, all internal
MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
Bruce Ashfield
Alexey Kardashevskiy
Chris Packham
Nicholas Piggin
Nathan Chancellor
Laurentiu Tudor
Clement Courbet
Segher Boessenkool
Christophe Leroy
Cédric Le Goater
Aneesh Kumar K.V
Michael Ellerman
Libor Pechacek
YueHaibing
Naveen N. Rao
Desnes A. Nunes do Rosario
Gustavo Luiz Duarte
Oliver O'Halloran
Tyrel Datwyler
Sean Christopherson
Pingfan Liu
Sukadev Bhattiprolu
Madalin Bucur