aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2020-07-31Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: - avoid invoking overflow handler for uaccess watchpoints - fix incorrect clock_gettime64 availability - fix EFI crash in create_mapping_late() * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8988/1: mmu: fix crash in EFI calls due to p4d typo in create_mapping_late() ARM: 8987/1: VDSO: Fix incorrect clock_gettime64 ARM: 8986/1: hw_breakpoint: Don't invoke overflow handler on uaccess watchpoints
2020-07-30ARM: percpu.h: fix build errorGrygorii Strashko
Fix build error for the case: defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6) config: keystone_defconfig CC arch/arm/kernel/signal.o In file included from ../include/linux/random.h:14, from ../arch/arm/kernel/signal.c:8: ../arch/arm/include/asm/percpu.h: In function ‘__my_cpu_offset’: ../arch/arm/include/asm/percpu.h:29:34: error: ‘current_stack_pointer’ undeclared (first use in this function); did you mean ‘user_stack_pointer’? : "Q" (*(const unsigned long *)current_stack_pointer)); ^~~~~~~~~~~~~~~~~~~~~ user_stack_pointer Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-28Merge tag 'arm-fixes-5.8-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into master Pull ARM SoC DT fixes from Arnd Bergmann: "These are the latest device tree fixes for Arm SoCs: - TI Keystone2 ethernet regressed after a driver change broke with incorrect phy-mode in a board's DT source. - A similar fix is needed for two i.MX boards that were missed in an earlier bugfix. - DT change for Armada 38x allowing to add the register needed to fix NETA lockup when repeatedly switching speed. - One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card detect work correctly. - Two fixes for the Allwinner SoCs, one to relax the CMA allocation ranges that were failing on older SoCs and one to fix Cedrus on the H6" * tag 'arm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: keystone-k2g-evm: fix rgmii phy-mode for ksz9031 phy ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detect ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2 ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2 arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage ARM: dts sunxi: Relax a bit the CMA pool allocation range
2020-07-25ARM: dts: keystone-k2g-evm: fix rgmii phy-mode for ksz9031 phyGrygorii Strashko
Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") the networking is broken on keystone-k2g-evm board. The above board have phy-mode = "rgmii-id" and it is worked before because KSZ9031 PHY started with default RGMII internal delays configuration (TX off, RX on 1.2 ns) and MAC provided TX delay by default. After above commit, the KSZ9031 PHY starts handling phy mode properly and enables both RX and TX delays, as result networking is become broken. Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous behavior. Fixes: bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-24Merge tag 'mvebu-fixes-5.8-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes mvebu fixes for 5.8 (part 1) - DT change for Armada 38x allowing to add the register needed to fix NETA lockup when repeatedly switching speed. * tag 'mvebu-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds
2020-07-24ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speedsRussell King
To support the change in "phy: armada-38x: fix NETA lockup when repeatedly switching speeds" we need to update the DT with the additional register. Fixes: 14dc100b4411 ("phy: armada38x: add common phy support") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-07-22Merge tag 'imx-fixes-5.8-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.8, round 3: - A couple of FEC2 phy-mode fixes on imx6sx-sabreauto and imx6sx-sdb board. - One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card detect work correctly. * tag 'imx-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detect ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2 ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2 Link: https://lore.kernel.org/r/20200720040148.GA20462@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'sunxi-fixes-for-5.8-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Two fixes for the Allwinner SoCs, one to relax the CMA allocation ranges that were failing on older SoCs and one to fix Cedrus on the H6. * tag 'sunxi-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage ARM: dts sunxi: Relax a bit the CMA pool allocation range Link: https://lore.kernel.org/r/e24f0608-6a4f-4163-b99e-a5f48e796184.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-21ARM: 8988/1: mmu: fix crash in EFI calls due to p4d typo in ↵Ard Biesheuvel
create_mapping_late() Commit 84e6ffb2c49c7901 ("arm: add support for folded p4d page tables") updated create_mapping_late() to take folded P4Ds into account when creating mappings, but inverted the p4d_alloc() failure test, resulting in no mapping to be created at all. When the EFI rtc driver subsequently tries to invoke the EFI GetTime() service, the memory regions covering the EFI data structures are missing from the page tables, resulting in a crash like Unable to handle kernel paging request at virtual address 5ae0cf28 pgd = (ptrval) [5ae0cf28] *pgd=80000040205003, *pmd=00000000 Internal error: Oops: 207 [#1] SMP THUMB2 Modules linked in: CPU: 0 PID: 7 Comm: kworker/u32:0 Not tainted 5.7.0+ #92 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Workqueue: efi_rts_wq efi_call_rts PC is at efi_call_rts+0x94/0x294 LR is at efi_call_rts+0x83/0x294 pc : [<c0b4f098>] lr : [<c0b4f087>] psr: 30000033 sp : e6219ef0 ip : 00000000 fp : ffffe000 r10: 00000000 r9 : 00000000 r8 : 30000013 r7 : e6201dd0 r6 : e6201ddc r5 : 00000000 r4 : c181f264 r3 : 5ae0cf10 r2 : 00000001 r1 : e6201dd0 r0 : e6201ddc Flags: nzCV IRQs on FIQs on Mode SVC_32 ISA Thumb Segment none Control: 70c5383d Table: 661cc840 DAC: 00000001 Process kworker/u32:0 (pid: 7, stack limit = 0x(ptrval)) ... [<c0b4f098>] (efi_call_rts) from [<c0448219>] (process_one_work+0x16d/0x3d8) [<c0448219>] (process_one_work) from [<c0448581>] (worker_thread+0xfd/0x408) [<c0448581>] (worker_thread) from [<c044ca7b>] (kthread+0x103/0x104) ... Fixes: 84e6ffb2c49c7901 ("arm: add support for folded p4d page tables") Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-07-21ARM: 8987/1: VDSO: Fix incorrect clock_gettime64Jaedon Shin
__vdso_*() should be removed and fallback used if CNTCVT is not available by cntvct_functional(). __vdso_clock_gettime64 when added previous commit is using the incorrect CNTCVT value in that state. __vdso_clock_gettime64 is also added to remove it's symbol. Cc: stable@vger.kernel.org Fixes: 74d06efb9c2f ("ARM: 8932/1: Add clock_gettime64 entry point") Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Tested-by: Robin Murphy <robin.mruphy@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-07-21ARM: 8986/1: hw_breakpoint: Don't invoke overflow handler on uaccess watchpointsWill Deacon
Unprivileged memory accesses generated by the so-called "translated" instructions (e.g. LDRT) in kernel mode can cause user watchpoints to fire unexpectedly. In such cases, the hw_breakpoint logic will invoke the user overflow handler which will typically raise a SIGTRAP back to the current task. This is futile when returning back to the kernel because (a) the signal won't have been delivered and (b) userspace can't handle the thing anyway. Avoid invoking the user overflow handler for watchpoints triggered by kernel uaccess routines, and instead single-step over the faulting instruction as we would if no overflow handler had been installed. Cc: <stable@vger.kernel.org> Fixes: f81ef4a920c8 ("ARM: 6356/1: hw-breakpoint: add ARM backend for the hw-breakpoint framework") Reported-by: Luis Machado <luis.machado@linaro.org> Tested-by: Luis Machado <luis.machado@linaro.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-07-20ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detectMichael Trimarchi
The current pin muxing scheme muxes GPIO_1 pad for USB_OTG_ID because of which when card is inserted, usb otg is enumerated and the card is never detected. [ 64.492645] cfg80211: failed to load regulatory.db [ 64.492657] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 76.343711] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 76.349742] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 2 [ 76.388862] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 76.396650] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 76.405412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 76.412763] usb usb2: Product: EHCI Host Controller [ 76.417666] usb usb2: Manufacturer: Linux 5.8.0-rc1-next-20200618 ehci_hcd [ 76.424623] usb usb2: SerialNumber: ci_hdrc.0 [ 76.431755] hub 2-0:1.0: USB hub found [ 76.435862] hub 2-0:1.0: 1 port detected The TRM mentions GPIO_1 pad should be muxed/assigned for card detect and ENET_RX_ER pad for USB_OTG_ID for proper operation. This patch fixes pin muxing as per TRM and is tested on a i.Core 1.5 MX6 DL SOM. [ 22.449165] mmc0: host does not support reading read-only switch, assuming write-enable [ 22.459992] mmc0: new high speed SDHC card at address 0001 [ 22.469725] mmcblk0: mmc0:0001 EB1QT 29.8 GiB [ 22.478856] mmcblk0: p1 p2 Fixes: 6df11287f7c9 ("ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support") Cc: stable@vger.kernel.org Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-20ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2Fabio Estevam
Commit 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode") fixed the phy-mode for fec1, but missed to fix it for the fec2 node. Fix fec2 to also use "rgmii-id" as the phy-mode. Cc: <stable@vger.kernel.org> Fixes: 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-20ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2Fabio Estevam
Commit 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode") fixed the phy-mode for fec1, but missed to fix it for the fec2 node. Fix fec2 to also use "rgmii-id" as the phy-mode. Cc: <stable@vger.kernel.org> Fixes: 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-17Merge tag 'arm-fixes-5.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into master Pull ARM SoC fixes from Arnd Bergmann: "This time there are a number of actual code fixes, plus a small set of device tree issues getting addressed: Renesas: - one defconfig cleanup to allow a later Kconfig change Intel socfpga: - enable QSPI devices on some machines - fix DTC validation warnings TI OMAP: - Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module driver - A regression fix for ti-sysc no-idle handling that caused issues compared to earlier platform data based booting - A fix for memory leak for omap_hwmod_allocate_module - Fix d_can driver probe for am437x NXP i.MX: - A couple of fixes on i.MX platform device registration code to stop the use of invalid IRQ 0. - Fix a regression seen on ls1021a platform, caused by commit 52102a3ba6a61 ("soc: imx: move cpu code to drivers/soc/imx"). - Fix a misconfiguration of audio SSI on imx6qdl-gw551x board. Amlogic Meson: - misc DT fixes - SoC ID fixes to detect all chips correctly" * tag 'arm-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema arm64: dts: stratix10: increase QSPI reg address in nand dts file arm64: dts: stratix10: add status to qspi dts node arm64: dts: agilex: add status to qspi dts node ARM: dts: Fix dcan driver probe failed on am437x platform ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST soc: imx: check ls1021a ARM: imx: Remove imx_add_imx_dma() unused irq_err argument ARM: imx: Provide correct number of resources when registering gpio devices ARM: dts: imx6qdl-gw551x: fix audio SSI bus: ti-sysc: Do not disable on suspend for no-idle bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk bus: ti-sysc: Fix wakeirq sleeping function called from invalid context ARM: dts: meson: Align L2 cache-controller nodename with dtschema arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency arm64: dts: meson: add missing gxl rng clock soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's
2020-07-17Merge tag 'socfpga_fixes_for_v5.8_v2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes arm/arm64: dts: socfpga: fixes for v5.8 - Add status = "okay" in QSPI - Increase QSPI size in reg property - Fix dtschema for SoCFPGA platforms * tag 'socfpga_fixes_for_v5.8_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema arm64: dts: stratix10: increase QSPI reg address in nand dts file arm64: dts: stratix10: add status to qspi dts node arm64: dts: agilex: add status to qspi dts node Link: https://lore.kernel.org/r/20200717155758.18233-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16Merge tag 'omap-for-v5.8/fixes-rc5-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.8-rc cycle Few fixes for issues noticed during testing: - Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module driver - A regression fix for ti-sysc no-idle handling that caused issues compared to earlier platform data based booting - A fix for memory leak for omap_hwmod_allocate_module - Fix d_can driver probe for am437x * tag 'omap-for-v5.8/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix dcan driver probe failed on am437x platform ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module bus: ti-sysc: Do not disable on suspend for no-idle bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk bus: ti-sysc: Fix wakeirq sleeping function called from invalid context Link: https://lore.kernel.org/r/pull-1594840100-132735@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16Merge tag 'imx-fixes-5.8-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.8, round 2: - A couple of fixes on i.MX platform device registration code to stop the use of invalid IRQ 0. - Fix a regression seen on ls1021a platform, caused by commit 52102a3ba6a61 ("soc: imx: move cpu code to drivers/soc/imx"). - Fix a misconfiguration of audio SSI on imx6qdl-gw551x board. * tag 'imx-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: check ls1021a ARM: imx: Remove imx_add_imx_dma() unused irq_err argument ARM: imx: Provide correct number of resources when registering gpio devices ARM: dts: imx6qdl-gw551x: fix audio SSI Link: https://lore.kernel.org/r/20200714145649.GP15718@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16Merge tag 'amlogic-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes Amlogic fixes for v5.8-rc - misc DT fixes, and SoC ID fixes * tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: Align L2 cache-controller nodename with dtschema arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency arm64: dts: meson: add missing gxl rng clock soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's Link: https://lore.kernel.org/r/7hk0zc1ujc.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-15ARM: dts: socfpga: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski
Fix dtschema validator warnings like: l2-cache@fffff000: $nodename:0: 'l2-cache@fffff000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Fixes: 475dc86d08de ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-07-14ARM: dts: Fix dcan driver probe failed on am437x platformdillon min
Got following d_can probe errors with kernel 5.8-rc1 on am437x [ 10.730822] CAN device driver interface Starting Wait for Network to be Configured... [ OK ] Reached target Network. [ 10.787363] c_can_platform 481cc000.can: probe failed [ 10.792484] c_can_platform: probe of 481cc000.can failed with error -2 [ 10.799457] c_can_platform 481d0000.can: probe failed [ 10.804617] c_can_platform: probe of 481d0000.can failed with error -2 actually, Tony has fixed this issue on am335x with the patch [3] Since am437x has the same clock structure with am335x [1][2], so reuse the code from Tony Lindgren's patch [3] to fix it. [1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN Integration [2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN Integration [3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on am335x") Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision") Signed-off-by: dillon min <dillon.minfei@gmail.com> [tony@atomide.com: aligned commit message a bit for readability] Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-14ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_moduleChen Tao
Fix memory leak in omap_hwmod_allocate_module not freeing in handling error path. Fixes: 8c87970543b17("ARM: OMAP2+: Add functions to allocate module data from device tree") Signed-off-by: Chen Tao <chentao107@huawei.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: fix call iounmap for missing regs] Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-07-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A few quirks for the Elan touchpad driver, another Thinkpad is being switched over from PS/2 to native RMI4 interface, and we gave a brand new SW_MACHINE_COVER switch definition" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add more hardware ID for Lenovo laptops Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux list Revert "Input: elants_i2c - report resolution information for touch major" Input: elan_i2c - only increment wakeup count on touch Input: synaptics - enable InterTouch for ThinkPad X1E 1st gen ARM: dts: n900: remove mmc1 card detect gpio Input: add `SW_MACHINE_COVER`
2020-07-13ARM: imx: Remove imx_add_imx_dma() unused irq_err argumentBjorn Helgaas
No callers of imx_add_imx_dma() need an error IRQ, so they supply 0 as "irq_err", which means we register a resource of IRQ 0, which is invalid and causes a warning if used. Remove the "irq_err" argument altogether so there's no chance of trying to use the invalid IRQ 0. Fixes: a85a6c86c25be ("driver core: platform: Clarify that IRQ 0 is invalid") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: kernel@pengutronix.de Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: imx: Provide correct number of resources when registering gpio devicesGuenter Roeck
Since commit a85a6c86c25be ("driver core: platform: Clarify that IRQ 0 is invalid"), the kernel is a bit touchy when it encounters interrupt 0. As a result, there are lots of warnings such as the following when booting systems such as 'kzm'. WARNING: CPU: 0 PID: 1 at drivers/base/platform.c:224 platform_get_irq_optional+0x118/0x128 0 is an invalid IRQ number Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3 #1 Hardware name: Kyoto Microcomputer Co., Ltd. KZM-ARM11-01 [<c01127d4>] (unwind_backtrace) from [<c010c620>] (show_stack+0x10/0x14) [<c010c620>] (show_stack) from [<c06f5f54>] (dump_stack+0xe8/0x120) [<c06f5f54>] (dump_stack) from [<c0128878>] (__warn+0xe4/0x108) [<c0128878>] (__warn) from [<c0128910>] (warn_slowpath_fmt+0x74/0xbc) [<c0128910>] (warn_slowpath_fmt) from [<c08b8e84>] (platform_get_irq_optional+0x118/0x128) [<c08b8e84>] (platform_get_irq_optional) from [<c08b8eb4>] (platform_irq_count+0x20/0x3c) [<c08b8eb4>] (platform_irq_count) from [<c0728660>] (mxc_gpio_probe+0x8c/0x494) [<c0728660>] (mxc_gpio_probe) from [<c08b93cc>] (platform_drv_probe+0x48/0x98) [<c08b93cc>] (platform_drv_probe) from [<c08b703c>] (really_probe+0x214/0x344) [<c08b703c>] (really_probe) from [<c08b7274>] (driver_probe_device+0x58/0xb4) [<c08b7274>] (driver_probe_device) from [<c08b7478>] (device_driver_attach+0x58/0x60) [<c08b7478>] (device_driver_attach) from [<c08b7504>] (__driver_attach+0x84/0xc0) [<c08b7504>] (__driver_attach) from [<c08b50f8>] (bus_for_each_dev+0x78/0xb8) [<c08b50f8>] (bus_for_each_dev) from [<c08b62cc>] (bus_add_driver+0x154/0x1e0) [<c08b62cc>] (bus_add_driver) from [<c08b82b8>] (driver_register+0x74/0x108) [<c08b82b8>] (driver_register) from [<c0102320>] (do_one_initcall+0x80/0x3b4) [<c0102320>] (do_one_initcall) from [<c1501008>] (kernel_init_freeable+0x170/0x208) [<c1501008>] (kernel_init_freeable) from [<c0e178d4>] (kernel_init+0x8/0x11c) [<c0e178d4>] (kernel_init) from [<c0100134>] (ret_from_fork+0x14/0x20) As it turns out, mxc_register_gpio() is a bit lax when setting the number of resources: it registers a resource with interrupt 0 when in reality there is no such interrupt. Fix the problem by not declaring the second interrupt resource if there is no second interrupt. Fixes: a85a6c86c25be ("driver core: platform: Clarify that IRQ 0 is invalid") Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-11ARM: dts: imx6qdl-gw551x: fix audio SSITim Harvey
The audio codec on the GW551x routes to ssi1. It fixes audio capture on the device. Cc: stable@vger.kernel.org Fixes: 3117e851cef1 ("ARM: dts: imx: Add TDA19971 HDMI Receiver to GW551x") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-08Raise gcc version requirement to 4.9Linus Torvalds
I realize that we fairly recently raised it to 4.8, but the fact is, 4.9 is a much better minimum version to target. We have a number of workarounds for actual bugs in pre-4.9 gcc versions (including things like internal compiler errors on ARM), but we also have some syntactic workarounds for lacking features. In particular, raising the minimum to 4.9 means that we can now just assume _Generic() exists, which is likely the much better replacement for a lot of very convoluted built-time magic with conditionals on sizeof and/or __builtin_choose_expr() with same_type() etc. Using _Generic also means that you will need to have a very recent version of 'sparse', but thats easy to build yourself, and much less of a hassle than some old gcc version can be. The latest (in a long string) of reasons for minimum compiler version upgrades was commit 5435f73d5c4a ("efi/x86: Fix build with gcc 4"). Ard points out that RHEL 7 uses gcc-4.8, but the people who stay back on old RHEL versions persumably also don't build their own kernels anyway. And maybe they should cross-built or just have a little side affair with a newer compiler? Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-06ARM: dts sunxi: Relax a bit the CMA pool allocation rangeMaxime Ripard
The hardware codec on the A10, A10s, A13 and A20 needs buffer in the first 256MB of RAM. This was solved by setting the CMA pool at a fixed address in that range. However, in recent kernels there's something else that comes in and reserve some range that end up conflicting with our default pool requirement, and thus makes its reservation fail. The video codec will then use buffers from the usual default pool, outside of the range it can access, and will fail to decode anything. Since we're only concerned about that 256MB, we can however relax the allocation to just specify the range that's allowed, and not try to enforce a specific address. Fixes: 5949bc5602cc ("ARM: dts: sun4i-a10: Add Video Engine and reserved memory nodes") Fixes: 960432010156 ("ARM: dts: sun5i: Add Video Engine and reserved memory nodes") Fixes: c2a641a74850 ("ARM: dts: sun7i-a20: Add Video Engine and reserved memory nodes") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200704130829.34297-1-maxime@cerno.tech
2020-07-03Merge tag 'for-linus-5.8b-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "One small cleanup patch for ARM and two patches for the xenbus driver fixing latent problems (large stack allocations and bad return code settings)" * tag 'for-linus-5.8b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: let xenbus_map_ring_valloc() return errno values only xen/xenbus: avoid large structs and arrays on the stack arm/xen: remove the unused macro GRANT_TABLE_PHYSADDR
2020-06-30ARM: dts: n900: remove mmc1 card detect gpioMerlijn Wajer
Instead, expose the key via the input framework, as SW_MACHINE_COVER The chip-detect GPIO is actually detecting if the cover is closed. Technically it's possible to use the SD card with open cover. The only downside is risk of battery falling out and user being able to physically remove the card. The behaviour of SD card not being available when the device is open is unexpected and creates more problems than it solves. There is a high chance, that more people accidentally break their rootfs by opening the case without physically removing the card. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Merlijn Wajer <merlijn@wizzup.org> Link: https://lore.kernel.org/r/20200612125402.18393-3-merlijn@wizzup.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-06-29arm/xen: remove the unused macro GRANT_TABLE_PHYSADDRXiaofei Tan
Fix the following sparse warning: arch/arm64/xen/../../arm/xen/enlighten.c:244: warning: macro "GRANT_TABLE_PHYSADDR" is not used [-Wunused-macros] It is an isolated macro, and should be removed when its last user was deleted in the following commit 3cf4095d7446 ("arm/xen: Use xen_xlate_map_ballooned_pages to setup grant table") Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2020-06-29ARM: dts: meson: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski
Fix dtschema validator warnings like: l2-cache-controller@c4200000: $nodename:0: 'l2-cache-controller@c4200000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20200626080626.4080-1-krzk@kernel.org
2020-06-28Merge tag 'arm-omap-fixes-5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM OMAP fixes from Arnd Bergmann: "The OMAP developers are particularly active at hunting down regressions, so this is a separate branch with OMAP specific fixes for v5.8: As Tony explains "The recent display subsystem (DSS) related platform data changes caused display related regressions for suspend and resume. Looks like I only tested suspend and resume before dropping the legacy platform data, and forgot to test it after dropping it. Turns out the main issue was that we no longer have platform code calling pm_runtime_suspend for DSS like we did for the legacy platform data case, and that fix is still being discussed on the dri-devel list and will get merged separately. The DSS related testing exposed a pile other other display related issues that also need fixing though": - Fix ti-sysc optional clock handling and reset status checks for devices that reset automatically in idle like DSS - Ignore ti-sysc clockactivity bit unless separately requested to avoid unexpected performance issues - Init ti-sysc framedonetv_irq to true and disable for am4 - Avoid duplicate DSS reset for legacy mode with dts data - Remove LCD timings for am4 as they cause warnings now that we're using generic panels Other OMAP changes from Tony include: - Fix omap_prm reset deassert as we still have drivers setting the pm_runtime_irq_safe() flag - Flush posted write for ti-sysc enable and disable - Fix droid4 spi related errors with spi flags - Fix am335x USB range and a typo for softreset - Fix dra7 timer nodes for clocks for IPU and DSP - Drop duplicate mailboxes after mismerge for dra7 - Prevent pocketgeagle header line signal from accidentally setting micro-SD write protection signal by removing the default mux - Fix NFSroot flakeyness after resume for duover by switching the smsc911x gpio interrupt to back to level sensitive - Fix regression for omap4 clockevent source after recent system timer changes - Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid" phy-mode - One patch to convert am3/am4 DT files to use the regular sdhci-omap driver instead of the old hsmmc driver, this was meant for the merge window but got lost in the process" * tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits) ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode ARM: dts: Fix omap4 system timer source clocks ARM: dts: Fix duovero smsc interrupt for suspend ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect Revert "bus: ti-sysc: Increase max softreset wait" ARM: dts: am437x-epos-evm: remove lcd timings ARM: dts: am437x-gp-evm: remove lcd timings ARM: dts: am437x-sk-evm: remove lcd timings ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag ARM: dts: Fix am33xx.dtsi USB ranges length bus: ti-sysc: Increase max softreset wait ARM: OMAP2+: Fix legacy mode dss_reset bus: ti-sysc: Fix uninitialized framedonetv_irq bus: ti-sysc: Ignore clockactivity unless specified as a quirk bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit ARM: dts: omap4-droid4: Fix spi configuration and increase rate bus: ti-sysc: Flush posted write on enable and disable soc: ti: omap-prm: use atomic iopoll instead of sleeping one ...
2020-06-28Merge tag 'arm-fixes-5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Here are a couple of bug fixes, mostly for devicetree files NXP i.MX: - Use correct voltage on some i.MX8M board device trees to avoid hardware damage - Code fixes for a compiler warning and incorrect reference counting, both harmless. - Fix the i.MX8M SoC driver to correctly identify imx8mp - Fix watchdog configuration in imx6ul-kontron device tree. Broadcom: - A small regression fix for the Raspberry-Pi firmware driver - A Kconfig change to use the correct timer driver on Northstar - A DT fix for the Luxul XWC-2000 machine - Two more DT fixes for NSP SoCs STmicroelectronics STI - Revert one broken patch for L2 cache configuration ARM Versatile Express: - Fix a regression by reverting a broken DT cleanup TEE drivers: - MAINTAINERS: change tee mailing list" * tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: Revert "ARM: sti: Implement dummy L2 cache's write_sec" soc: imx8m: fix build warning ARM: imx6: add missing put_device() call in imx6q_suspend_init() ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() soc: imx8m: Correct i.MX8MP UID fuse offset ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range ARM: dts: NSP: Correct FA2 mailbox node ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision() MAINTAINERS: change tee mailing list ARM: dts: NSP: Disable PL330 by default, add dma-coherent property ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000 arm: dts: vexpress: Move mcc node back into motherboard node
2020-06-28Merge tag 'efi-urgent-2020-06-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: - Fix build regression on v4.8 and older - Robustness fix for TPM log parsing code - kobject refcount fix for the ESRT parsing code - Two efivarfs fixes to make it behave more like an ordinary file system - Style fixup for zero length arrays - Fix a regression in path separator handling in the initrd loader - Fix a missing prototype warning - Add some kerneldoc headers for newly introduced stub routines - Allow support for SSDT overrides via EFI variables to be disabled - Report CPU mode and MMU state upon entry for 32-bit ARM - Use the correct stack pointer alignment when entering from mixed mode * tag 'efi-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub: arm: Print CPU boot mode and MMU state at boot efi/libstub: arm: Omit arch specific config table matching array on arm64 efi/x86: Setup stack correctly for efi_pe_entry efi: Make it possible to disable efivar_ssdt entirely efi/libstub: Descriptions for stub helper functions efi/libstub: Fix path separator regression efi/libstub: Fix missing-prototype warning for skip_spaces() efi: Replace zero-length array and use struct_size() helper efivarfs: Don't return -EINTR when rate-limiting reads efivarfs: Update inode modification time for successful writes efi/esrt: Fix reference count leak in esre_create_sysfs_entry. efi/tpm: Verify event log header before parsing efi/x86: Fix build with gcc 4
2020-06-28Merge tag 'imx-fixes-5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.8: - Fix LDO1 and LDO2 voltage range for a couple of i.MX8M board device trees. - Fix i.MX8MP UID fuse offset in i.MX8M SoC driver. - Fix watchdog configuration in imx6ul-kontron device tree. - Fix one build warning seen on building soc-imx8m driver with x86_64-randconfig. - Add missing put_device() call for a couple of mach-imx PM functions. * tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx8m: fix build warning ARM: imx6: add missing put_device() call in imx6q_suspend_init() ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() soc: imx8m: Correct i.MX8MP UID fuse offset ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range Link: https://lore.kernel.org/r/20200624111725.GA24312@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'arm-soc/for-5.8/soc-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs machine/Kconfig fixes for 5.8, please pull the following: - Matthew adds a missing select to permit the use of the standard ARM SP804 timers on Norsthstar Plus (NSP) * tag 'arm-soc/for-5.8/soc-fixes' of https://github.com/Broadcom/stblinux: ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP Link: https://lore.kernel.org/r/20200619202250.19029-3-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'arm-soc/for-5.8/devicetree-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.8, please pull the following: - Rafal adds a missing 'device_type' property to the Luxul XWC-2000 required for the memory nodes to be correctly parsed by Linux - Matthew provides two fixes for the NSP SoCs, one to disable the PL330 DMA controller by default since it can be left in reset by the bootloader and the second to correct the flow accelerator mailbox node * tag 'arm-soc/for-5.8/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: NSP: Correct FA2 mailbox node ARM: dts: NSP: Disable PL330 by default, add dma-coherent property ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000 Link: https://lore.kernel.org/r/20200619202250.19029-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Revert "ARM: sti: Implement dummy L2 cache's write_sec"Patrice Chotard
This reverts commit 7b8e0188fa717cd9abc4fb52587445b421835c2a. Initially, STiH410-B2260 was supposed to be secured, that's why l2c_write_sec was stubbed to avoid secure register access from non secure world. But by default, STiH410-B2260 is running in non secure mode, so L2 cache register accesses are authorized, l2c_write_sec stub is not needed. With this patch, L2 cache is configured and performance are enhanced. Link: https://lore.kernel.org/r/20200618172456.29475-1-patrice.chotard@st.com Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Cc: Alain Volmat <alain.volmat@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'omap-for-v5.8/fixes-rc1-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/omap-fixes Few dts fixes for omaps for v5.8 Few fixes for various devices: - Prevent pocketgeagle header line signal from accidentally setting micro-SD write protection signal by removing the default mux - Fix NFSroot flakeyness after resume for duover by switching the smsc911x gpio interrupt to back to level sensitive - Fix regression for omap4 clockevent source after recent system timer changes - Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid" phy-mode * tag 'omap-for-v5.8/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode ARM: dts: Fix omap4 system timer source clocks ARM: dts: Fix duovero smsc interrupt for suspend ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect Link: https://lore.kernel.org/r/pull-1592499282-121092@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'omap-for-v5.8/dt-missed-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/omap-fixes Missed sdhci patch for am3 and am4 I forgot to send a pull request earlier for converting am3 and am4 to use sdhci-omap driver instead of the old omap_hsmmc driver. There was a display subsystem related suspend and resume regression found recently and looks like I forgot to send a pull request for this patch while debugging the regression. This patch has been tested without the display subsystem, and has been in Linux next for several weeks now, so would be good to have merged for v5.8. * tag 'omap-for-v5.8/dt-missed-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Move am33xx and am43xx mmc nodes to sdhci-omap driver Link: https://lore.kernel.org/r/pull-1591637467-607254@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'omap-for-v5.8/fixes-merge-window-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.8 The recent display subsystem (DSS) related platform data changes caused display related regressions for suspend and resume. Looks like I only tested suspend and resume before dropping the legacy platform data, and forgot to test it after dropping it. Turns out the main issue was that we no longer have platform code calling pm_runtime_suspend for DSS like we did for the legacy platform data case, and that fix is still being discussed on the dri-devel list and will get merged separately. The DSS related testing exposed a pile other other display related issues that also need fixing though: - Fix ti-sysc optional clock handling and reset status checks for devices that reset automatically in idle like DSS - Ignore ti-sysc clockactivity bit unless separately requested to avoid unexpected performance issues - Init ti-sysc framedonetv_irq to true and disable for am4 - Avoid duplicate DSS reset for legacy mode with dts data - Remove LCD timings for am4 as they cause warnings now that we're using generic panels Then there is a pile of other fixes not related to the DSS: - Fix omap_prm reset deassert as we still have drivers setting the pm_runtime_irq_safe() flag - Flush posted write for ti-sysc enable and disable - Fix droid4 spi related errors with spi flags - Fix am335x USB range and a typo for softreset - Fix dra7 timer nodes for clocks for IPU and DSP - Drop duplicate mailboxes after mismerge for dra7 * tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: Revert "bus: ti-sysc: Increase max softreset wait" ARM: dts: am437x-epos-evm: remove lcd timings ARM: dts: am437x-gp-evm: remove lcd timings ARM: dts: am437x-sk-evm: remove lcd timings ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag ARM: dts: Fix am33xx.dtsi USB ranges length bus: ti-sysc: Increase max softreset wait ARM: OMAP2+: Fix legacy mode dss_reset bus: ti-sysc: Fix uninitialized framedonetv_irq bus: ti-sysc: Ignore clockactivity unless specified as a quirk bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit ARM: dts: omap4-droid4: Fix spi configuration and increase rate bus: ti-sysc: Flush posted write on enable and disable soc: ti: omap-prm: use atomic iopoll instead of sleeping one Link: https://lore.kernel.org/r/pull-1591889257-410830@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-27Merge tag 'juno-fix-5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes ARMv8 Juno/Vexpress/Fast Models fix for v5.8 Partial revert of some recent fixes to silence DTC warning which broke clocks on some Vexpress platforms resulting in boot issues. * tag 'juno-fix-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm: dts: vexpress: Move mcc node back into motherboard node Link: https://lore.kernel.org/r/20200609180447.GB5732@bogus Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-24ARM: imx6: add missing put_device() call in imx6q_suspend_init()yu kuai
if of_find_device_by_node() succeed, imx6q_suspend_init() doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation. Signed-off-by: yu kuai <yukuai3@huawei.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-24ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram()yu kuai
if of_find_device_by_node() succeed, imx_suspend_alloc_ocram() doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation. Fixes: 1579c7b9fe01 ("ARM: imx53: Set DDR pins to high impedance when in suspend to RAM.") Signed-off-by: yu kuai <yukuai3@huawei.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-23ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drainFrieder Schrempf
The WDOG_ANY signal is connected to the RESET_IN signal of the SoM and baseboard. It is currently configured as push-pull, which means that if some external device like a programmer wants to assert the RESET_IN signal by pulling it to ground, it drives against the high level WDOG_ANY output of the SoC. To fix this we set the WDOG_ANY signal to open-drain configuration. That way we make sure that the RESET_IN can be asserted by the watchdog as well as by external devices. Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-23ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoMFrieder Schrempf
The watchdog's WDOG_ANY signal is used to trigger a POR of the SoC, if a soft reset is issued. As the SoM hardware connects the WDOG_ANY and the POR signals, the watchdog node itself and the pin configuration should be part of the common SoM devicetree. Let's move it from the baseboard's devicetree to its proper place. Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-18maccess: make get_kernel_nofault() check for minimal type compatibilityLinus Torvalds
Now that we've renamed probe_kernel_address() to get_kernel_nofault() and made it look and behave more in line with get_user(), some of the subtle type behavior differences end up being more obvious and possibly dangerous. When you do get_user(val, user_ptr); the type of the access comes from the "user_ptr" part, and the above basically acts as val = *user_ptr; by design (except, of course, for the fact that the actual dereference is done with a user access). Note how in the above case, the type of the end result comes from the pointer argument, and then the value is cast to the type of 'val' as part of the assignment. So the type of the pointer is ultimately the more important type both for the access itself. But 'get_kernel_nofault()' may now _look_ similar, but it behaves very differently. When you do get_kernel_nofault(val, kernel_ptr); it behaves like val = *(typeof(val) *)kernel_ptr; except, of course, for the fact that the actual dereference is done with exception handling so that a faulting access is suppressed and returned as the error code. But note how different the casting behavior of the two superficially similar accesses are: one does the actual access in the size of the type the pointer points to, while the other does the access in the size of the target, and ignores the pointer type entirely. Actually changing get_kernel_nofault() to act like get_user() is almost certainly the right thing to do eventually, but in the meantime this patch adds logit to at least verify that the pointer type is compatible with the type of the result. In many cases, this involves just casting the pointer to 'void *' to make it obvious that the type of the pointer is not the important part. It's not how 'get_user()' acts, but at least the behavioral difference is now obvious and explicit. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-18maccess: rename probe_kernel_address to get_kernel_nofaultChristoph Hellwig
Better describe what this helper does, and match the naming of copy_from_kernel_nofault. Also switch the argument order around, so that it acts and looks like get_user(). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-17ARM: dts: NSP: Correct FA2 mailbox nodeMatthew Hagan
The FA2 mailbox is specified at 0x18025000 but should actually be 0x18025c00, length 0x400 according to socregs_nsp.h and board_bu.c. Also the interrupt was off by one and should be GIC SPI 151 instead of 150. Fixes: 17d517172300 ("ARM: dts: NSP: Add mailbox (PDC) to NSP") Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-02 14:31:40 +0000