summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/tegra20-colibri-512.dtsi
AgeCommit message (Collapse)Author
2014-01-23Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT and DT-conversion-related changes for various ARM platforms. Most of these are to enable various devices on various boards, etc, and not necessarily worth enumerating. New boards and systems continue to come in as new devicetree files that don't require corresponding C changes any more, which is indicating that the system is starting to work fairly well. A few things worth pointing out: * ST Ericsson ux500 platforms have made the major push to move over to fully support the platform with DT * Renesas platforms continue their conversion over from legacy platform devices to DT-based for hardware description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits) ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6 ARM: dts: sirf: add lost minigpsrtc device node ARM: dts: sirf: add clock, frequence-voltage table for CPU0 ARM: dts: sirf: add lost bus_width, clock and status for sdhci ARM: dts: sirf: add lost clocks for cphifbg ARM: dts: socfpga: add pl330 clock ARM: dts: socfpga: update L2 tag and data latency arm: sun7i: cubietruck: Enable the i2c controllers ARM: dts: add support for EXYNOS4412 based TINY4412 board ARM: dts: Add initial support for Arndale Octa board ARM: bcm2835: add USB controller to device tree ARM: dts: MSM8974: Add MMIO architected timer node ARM: dts: MSM8974: Add restart node ARM: dts: sun7i: external clock outputs ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style ARM: dts: sun7i: Add pin muxing options for clock outputs ARM: dts: sun7i: Add rtp controller node ARM: dts: sun5i: Add rtp controller node ARM: dts: sun4i: Add rtp controller node ...
2014-01-21regulator: tps6586x: Add and use correct voltage tableStefan Agner
Depending on the regulator version, the voltage table might be different. Use version specific regulator tables in order to select correct voltage table. For the following regulator versions different voltage tables are now used: * TPS658623: Use correct voltage table for SM2 * TPS658643: New voltage table for SM2 Both versions are in use on the Colibri T20 module. Make use of the correct tables by requesting the correct SM2 voltage of 1.8V. This change is not backward compatible since an old driver is not able to correctly set that value. The value 1.8V is out of range for the old driver and will refuse to probe the device. The regulator starts with default settings and the driver shows appropriate error messages. On Colibri T20, the old value used to work with TPS658623 since the driver applied a wrong voltage table too. However, the TPS658643 used on V1.2 devices uses yet another voltage table and those broke that pseudo-compatibility. The regulator driver now has the correct voltage table for both regulator versions and those the correct voltage can be used in the device tree. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-12-18ARM: tegra: set up /aliases entries for RTCsStephen Warren
This ensures that the PMIC RTC provides the system time, rather than the on-SoC RTC, which is not battery-backed. tegra124-venice2.dts isn't touched yet since we haven't added any off- SoC RTC device to its device tree. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16ARM: tegra: correct Colibri T20 regulator settingsStefan Agner
Set the parent of the regulators LDO2 to LDO9 according to the schematic. Set the base voltage to 3.3V, there is only 3.3V on the module itself. Set the Core and CPU voltage to the specified voltages of 1.2V and 1.0V respectivly. LDO6 should deliver 2.85V. The attached peripherals were not in use so far. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl definesLaxman Dewangan
Use Tegra pinconrol dt-binding macro to set the values of different pinmux properties of Tegra20 platforms. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16ARM: tegra: fix node sort orderStephen Warren
For Tegra DT files, I've been attempting to keep the nodes sorted in the order: 1) Nodes with reg, in order of reg. 2) Nodes without reg, alphabetically. This patch fixes a few escapees that I missed:-( The diffs look larger than they really are, because sometimes when one node was moved up or down, diff chose to represent this as many other nodes being moved the other way! Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16ARM: tegra: add missing unit addresses to DTStephen Warren
DT node names should include a unit address iff the node has a reg property. For Tegra DTs at least, we were previously applying a different rule, namely that node names only needed to include a unit address if it was required to make the node name unique. Consequently, many unit addresses are missing. Add them. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-20Merge tag 'tegra-for-3.12-dt' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt From: Stephen Warren: ARM: tegra: device tree changes for 3.12 This branch contains all *.dts (device tree) changes for Tegra. New features enabled are: * PMICs on Dalmore * CPU power-gating on Dalmore * HDMI output on Beaver * LP1 system suspend mode on almost all boards * PCIe support on numerous Tegra20/30 boards * USB support on Tegra30/114 boards * Audio capture on Beaver and Dalmore * Temperature sensor on Cardhu. ... along with a few DT cleanups. * tag 'tegra-for-3.12-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (25 commits) ARM: tegra: add Mic Jack to Dalmore device tree ARM: tegra: add Mic Jack to Beaver device tree ARM: tegra: add USB DT entries for Tegra114, Dalmore ARM: tegra: add USB DT entries for Tegra30 ARM: dts: tegra: Increase prefetchable PCI memory space ARM: tegra: Fix Beaver's PCIe lane configuration ARM: tegra: Enable PCIe controller on Beaver ARM: tegra: Enable PCIe controller on Cardhu ARM: tegra: Add Tegra30 PCIe support ARM: tegra: trimslice: Initialize PCIe from DT ARM: tegra: harmony: Initialize PCIe from DT ARM: tegra: tec: Add PCIe support ARM: tegra: tamonten: Add PCIe support ARM: tegra: Add Tegra20 PCIe support to DT ARM: tegra: enable LP1 suspend mode ARM: tegra: beaver: Enable HDMI output ARM: tegra: use TEGRA_GPIO() in a couple more places ARM: tegra: dalmore: fix the irq trigger type of Palmas MFD device ARM: tegra: define valid function names in DT document ARM: tegra: dalmore: add PM configurations for PMC ...
2013-08-12ARM: tegra: enable LP1 suspend modeJoseph Lo
Enabling the LP1 suspend mode for Tegra devices. Tested-by: Marc Dietrich <marvin24@gmx.de> # paz00 board Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-04ARM: tegra: enable ULPI phy on Colibri T20Lucas Stach
This was missed when splitting out the phy from the controller node in commit 9dffe3be3f32 (ARM: tegra: modify ULPI reset GPIO properties). Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-28ARM: tegra20: convert device tree files to use CLK definesHiroshi Doyu
Use the Tegra20 CAR binding header (tegra20-car.h) to replace magic numbers in the device tree. For example, - clocks = <&tegra_car 28>; + clocks = <&tegra_car CLK_HOST1X>; Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> [swarren, updated since tegra20-car.h moved for consistency] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-28ARM: tegra: convert device tree files to use IRQ definesStephen Warren
Use the GIC and standard IRQ binding defines in all IRQ specifiers. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-28ARM: tegra: convert device tree files to use GPIO definesStephen Warren
Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-28ARM: tegra: use #include for all device treesStephen Warren
Replace /include/ (dtc) with #include (C pre-processor) for all Tegra DT files, so that gcc -E handles the entire include tree, and hence any of those files can #include some other file e.g. for constant definitions. This allows future use of #defines and header files in order to define names for various constants, such as the IDs and flags in GPIO specifiers. Use of those features will increase the readability of the device tree files. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-17ARM: tegra: modify ULPI reset GPIO propertiesVenu Byravarasu
1. All Tegra20 ULPI reset GPIO DT properties are modified to indicate active low nature of the GPIO. 2. Placed USB PHY DT node immediately below the EHCI controller DT nodes and corrected reg value in the name of USB PHY DT node. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-04clk: tegra: Fix cdev1 and cdev2 IDsPrashant Gaikwad
Correct IDs for cdev1 and cdev2 are 94 and 93 respectively. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: split into separate driver and device-tree patches] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-04ARM: dts: tegra: add the PM configurations of PMCJoseph Lo
Adding the PM configuration of PMC when the platform support suspend function. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-04ARM: tegra: add clocks property to AC'97 sound nodesStephen Warren
Audio-related clocks need to be represented in the device tree. Update bindings to describe which clocks are needed, and DT files to include those clocks. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-03ARM: tegra: add clock source of PMC to device treesJoseph Lo
Adding the bindings of the clock source of PMC in DT. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-11ARM: dts: tegra: fix the activate polarity of cd-gpio in mmc hostJoseph Lo
The GPIO pin of SD slot card detection should active low. Signed-off-by: Joseph Lo <josephl@nvidia.com> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28ARM: tegra: Add Colibri T20 512MB COM device treeLucas Stach
This adds the device tree include file for the Toradex Colibri T20 Computer on Module (COM). It's only valid for the 512MB RAM version of the module, as the 256MB version needs different EMC tables and flash configuration. To make this clear the suffix -512 was added to the board compatible string. The Colibri T20 uses a Tegra20 SoC and has onboard USB Ethernet and AC97 sound. Still some things like onboard NAND support missing, but should be a good base for further development. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>