aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
AgeCommit message (Collapse)Author
2020-05-05ARM: dts: aspeed: zaius: Add gpio line namesAndrew Geissler
Name the GPIOs to help userspace work with them. The names describe the functionality the lines provide, not the net or ball name. This makes it easier to share userspace code across different systems and makes the use of the lines more obvious. Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-01ARM: dts: aspeed: Add RCLK to MAC clocks for RMII interfacesAndrew Jeffery
We need to ungate RCLK on AST2500- and AST2600-based platforms for RMII to function. RMII interfaces are commonly used for NCSI. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-01ARM: dts: aspeed: Add "spi-max-frequency" propertyCédric Le Goater
Keep the FMC controller chips at a safe 50 MHz rate and use 100 MHz for the PNOR on the machines using a AST2500 SoC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-24ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slotsRobert Lippert
The change to include ibm-power9-cfam.dtsi resulted in a renumbering of all of the I2C bus numbers behind the on-board muxes. This breaks some tools which have hardcoded the bus numbers. Add device tree aliases for the I2C buses routed through the PCIe slots so that they return to their former numbers before the cfam change. Signed-off-by: Robert Lippert <rlippert@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-24ARM: dts: aspeed: zaius: update 12V brick I2C addressRobert Lippert
The I2C address of the brick is different depending on the board SKU. Update the values to instantiate addresses which work for most boards. Signed-off-by: Robert Lippert <rlippert@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-24ARM: dts: aspeed: zaius: add Infineon and Intersil regulatorsMaxim Sloyko
Add the nodes for the ir38064 and isl68137 devices on the Zaius board. Signed-off-by: Maxim Sloyko <maxims@google.com> Signed-off-by: Robert Lippert <rlippert@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-24ARM: dts: aspeed: Add Power9 and Power9 CFAM descriptionBenjamin Herrenschmidt
To be used by the OpenPower BMC machines. This provides proper chip IDs but also adds the various sub-devices necessary for the future OCC driver among other. All the added nodes comply with the existing upstream FSI bindings. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-06-12fsi/fsi-master-gpio: Add "no-gpio-delays" optionBenjamin Herrenschmidt
This adds support for an optional device-tree property that makes the driver skip all the delays around clocking the GPIOs and set it in the device-tree of common POWER9 based OpenPower platforms. This useful on chips like the AST2500 where the GPIO block is running at a fairly low clock frequency (25Mhz typically). In this case, the delays are unnecessary and due to the low precision of the timers, actually quite harmful in terms of performance. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> Tested-by: Joel Stanley <joel@jms.id.au>
2018-05-25ARM: dts: aspeed: zaius: Add pcie-e2b-present gpio keyLei YU
Add GPIO key to check presence of PCIE E2B. Signed-off-by: Lei YU <mine260309@gmail.com> Acked-by: Xo Wang <xow@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-02-19ARM: dts: aspeed: Enable IPMI BT node on OpenPower machinesJoel Stanley
These BMC systems require this device to communicate with the host. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-12-21ARM: dts: aspeed: Add Ingrasys Zaius BMC machineXo Wang
Zaius is a POWER9 platform announced at OpenPOWER Summit 2016. This adds basic DTS support for its AST2500 BMC. This adds the device tree description for most upstream components. It is a squashed commit of all of the patches from the OpenBMC kernel tree. Signed-off-by: Xo Wang <xow@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Robert Lippert <rlippert@google.com> Signed-off-by: Peter Hanson <peterh@google.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Rick Altherr <raltherr@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au>