| Age | Commit message (Collapse) | Author |
|---|
|
Create a vnic devlink health reporter for PFs/VFs interfaces.
The reporter's diagnose callback displays the values of vNIC/vport
transport debug counters of PFs/VFs, as follows:
$ devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
Moreover, add documentation on the reporter functionality and the
counters description.
While at it, expose the vNIC counters diagnose function to be used by
the downstream patch, which will reveal the counters for representor
interfaces.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The out-of-tree driver is hosted on SourceForge, as this does not apply
to the kernel driver remove references to it. Also do some minor
formatting changes around this section.
Suggested-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
|
|
Update the email address for support to use Intel Wired LAN, the mailing
list used for kernel development.
Suggested-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
|
|
The recycle parameter used during page release is no longer
necessary: the page pool can detect when the page cannot be
recycled to the cache or ring without any outside hint.
The page pool will also take care of cleaning up after itself
once all the inflight pages have been released. So no need to
explicitly release pages to the system.
Remove the internal page_cache stats as the mlx5e_page_cache
struct no longer exists.
Delete the documentation entries along with the stats.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add basic documentation about NAPI. We can stop linking to the ancient
doc on the LF wiki.
Link: https://lore.kernel.org/all/20230315223044.471002-1-kuba@kernel.org/
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> # for ctucanfd-driver.rst
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230322053848.198452-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are likely no users of this driver as the hardware has been
discontinued since 2010. Remove the driver and all references to it
in documentation.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We refer to a TC NIC rule that involves forwarding as "hairpin".
Hairpin queues are mlx5 hardware specific implementation for hardware
forwarding of such packets.
Per the discussion in [1], move the hairpin queues control (number and
size) from debugfs to devlink.
Expose two devlink params:
- hairpin_num_queues: control the number of hairpin queues
- hairpin_queue_size: control the size (in packets) of the hairpin queues
[1] https://lore.kernel.org/all/20230111194608.7f15b9a1@kernel.org/
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a moderately calm cycle for documentation; the significant
changes include:
- Some significant additions to the memory-management documentation
- Some improvements to navigation in the HTML-rendered docs
- More Spanish and Chinese translations
... and the usual set of typo fixes and such"
* tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits)
Documentation/watchdog/hpwdt: Fix Format
Documentation/watchdog/hpwdt: Fix Reference
Documentation: core-api: padata: correct spelling
docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION
docs: Use HTML comments for the kernel-toc SPDX line
docs: Add more information to the HTML sidebar
Documentation: KVM: Update AMD memory encryption link
printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay=
Documentation: userspace-api: correct spelling
Documentation: sparc: correct spelling
Documentation: driver-api: correct spelling
Documentation: admin-guide: correct spelling
docs: add workload-tracing document to admin-guide
docs/admin-guide/mm: remove useless markup
docs/mm: remove useless markup
docs/mm: Physical Memory: remove useless markup
docs/sp_SP: Add process magic-number translation
docs: ftrace: always use canonical ftrace path
Doc/damon: fix the data path error
dma-buf: Add "dma-buf" to title of documentation
...
|
|
net/devlink/leftover.c / net/core/devlink.c:
565b4824c39f ("devlink: change port event netdev notifier from per-net to global")
f05bd8ebeb69 ("devlink: move code to a dedicated directory")
687125b5799c ("devlink: split out core code")
https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update new email address for Wangxun 10Gb NIC support team.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20230208023035.3371250-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some mlx5 devices are capable of disabling RoCE. In this situation,
disablement does not need to be handled at the driver level.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Update rst file to contain general information about statistics counters
for the mlx5 driver. Add specifics about individual counters in list
tables.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Tracepoints were previously implemented but not documented till this patch
series.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Provide information for Kconfig flags defined but not documented till this
patch series for the mlx5 driver.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The mlx5 device driver documentation page has grown in size and should be
split into multiple subpages. This change also contains a table of contents
for these new subpages.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
net/core/gro.c
7d2c89b32587 ("skb: Do mix page pool and page referenced frags in GRO")
b1a78b9b9886 ("net: add support for ipv4 big tcp")
https://lore.kernel.org/all/20230203094454.5766f160@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many parts of Documentation still reference this older debugfs path, so
let's update them to avoid confusion.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230125213251.2013791-1-zwisler@google.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Correct spelling problems for Documentation/networking/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jiri Pirko <jiri@nvidia.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20230129231053.20863-5-rdunlap@infradead.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Current link for NAPI documentation in ice driver doesn't work - it
returns 404. Update the link to the working one.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Previously support for GNSS was implemented as a TTY driver, it allowed
to access GNSS receiver on /dev/ttyGNSS_<bus><func>.
Use generic GNSS subsystem API instead of implementing own TTY driver.
The receiver is accessible on /dev/gnss<id>. In case of multiple receivers
in the OS, correct device can be found by enumerating either:
- /sys/class/net/<eth port>/device/gnss/
- /sys/class/gnss/gnss<id>/device/
Using GNSS subsystem is superior to implementing own TTY driver, as the
GNSS subsystem was designed solely for this purpose. It also implements
TTY driver but in a common and defined way.
From user perspective, there is no difference in communicating with a
device, except new path to the device shall be used. The device will
provide same information to the userspace as the old one, and can be used
in the same way, i.e.:
old # gpsmon /dev/ttyGNSS_2100_0
new # gpsmon /dev/gnss0
There is no other impact on userspace tools.
User expecting onboard GNSS receiver support is required to enable
CONFIG_GNSS=y/m in kernel config.
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement devlink port function commands to enable / disable migratable.
This is used to control the migratable capability of the device.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement devlink port function commands to enable / disable RoCE.
This is used to control the RoCE device capabilities.
This patch implement infrastructure which will be used by downstream
patches that will add additional capabilities.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
devlink port function hw_addr attr documentation is in mlx5 specific
file while there is nothing mlx5 specific about it.
Move it to devlink-port.rst.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dpaa2_mac_is_type_fixed() is a header with no implementation and no
callers, which is referenced from the documentation though. It can be
deleted.
On the other hand, it would be useful to reuse the code between
dpaa2_eth_is_type_phy() and dpaa2_switch_port_is_type_phy(). That common
code should be called dpaa2_mac_is_type_phy(), so let's create that.
The removal and the addition are merged into the same patch because,
in fact, is_type_phy() is the logical opposite of is_type_fixed().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Improve general readability of the device driver documentation.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The NFP documentation is updated to include information about Corigine,
and the new NFP3800 chips. The 'Acquiring Firmware' section is updated
with new information about where to find firmware.
Two new sections are added to expand the coverage of the documentation.
The new sections include:
- Devlink Info
- Configure Device
Signed-off-by: Walter Heymans <walter.heymans@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20221115090834.738645-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for Octeon device CNF95N.
CNF95N is a Octeon Fusion family product with same PCI NIC
characteristics as CN93 which is currently supported by the driver.
update supported device list in Documentation.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Link: https://lore.kernel.org/r/20221103060600.1858-1-vburru@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Amarula contact info email address is wrong, so fix it up to use the
correct one.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20220828134442.794990-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add build options and guidance doc.
Initialize pci device access for Wangxun Gigabit Ethernet devices.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://lore.kernel.org/r/20220826034609.51854-1-mengyuanlou@net-swift.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the possibility to write raw bytes to the GNSS module through the
first TTY device. This allows user to configure the module.
Create a second read-only TTY device.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The last meaningful change to this driver was made by Jon in 2011.
As much as we'd like to believe that this is because the code is
perfect the chances are nobody is using this hardware.
Because of the size of this driver there is a nontrivial maintenance
cost to keeping this code around, in the last 2 years we're averaging
more than 1 change a month. Some of which require nontrivial review
effort, see commit 877fe9d49b74 ("Revert "drivers/net/ethernet/neterion/vxge:
Fix a use-after-free bug in vxge-main.c"") for example.
Let's try to remove this driver. In general, IMHO, we need to
establish a clear path for shedding dead code. It will be hard
to unless we have some experience trying to delete stuff.
Link: https://lore.kernel.org/r/20220701044234.706229-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-07-03
this is a pull request of 15 patches for net-next/master.
The first 2 patches are by Max Staudt and add the can327 serial CAN
driver along with a new line discipline ID.
The next patch is by me an fixes a typo in the ctucanfd driver.
The last 12 patches are by Dario Binacchi and integrate slcan CAN
serial driver better into the existing CAN driver API.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add doc build infrastructure for txgbe driver.
Initialize PCI memory space for WangXun 10 Gigabit Ethernet devices.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20220628095530.889344-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is the can327 driver. It does a surprisingly good job at turning
ELM327 based OBD-II interfaces into cheap CAN interfaces for simple
homebrew projects.
Please see the included documentation for details and limitations:
Documentation/networking/device_drivers/can/can327.rst
Link: https://lore.kernel.org/all/20220618195031.10975-1-max@enpas.org
Signed-off-by: Max Staudt <max@enpas.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
[mkl: minor coding style improvements]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Looks like almost all changes to this driver had been tree-wide
refactoring since git era begun. There is one commit from Al
15 years ago which could potentially be fixing a real bug.
The driver is using virt_to_bus() and is a real magnet for pointless
cleanups. It seems unlikely to have real users. Let's try to shed
this maintenance burden.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Two issues were observed in the ReST doc added by commit c3a0addefbde
("docs: ctucanfd: CTU CAN FD open-source IP core documentation.")
with Sphinx versions 2.4.4 and 4.5.0.
The plain "figure" directive broke "make pdfdocs" due to a missing
PDF figure. For conversion of SVG -> PDF to work, the "kernel-figure"
directive, which is an extension for kernel documentation, should
be used instead.
The directive of "code:: raw" causes a warning from both
"make htmldocs" and "make pdfdocs", which reads:
[...]/can/ctu/ctucanfd-driver.rst:75: WARNING: Pygments lexer name
'raw' is not known
A plain literal-block marker should suffice where no syntax
highlighting is intended.
Fix the issues by using suitable directive and marker.
Fixes: c3a0addefbde ("docs: ctucanfd: CTU CAN FD open-source IP core documentation.")
Link: https://lore.kernel.org/all/5986752a-1c2a-5d64-f91d-58b1e6decd17@gmail.com
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Cc: Martin Jerabek <martin.jerabek01@gmail.com>
Cc: Ondrej Ille <ondrej.ille@gmail.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Looks like all the changes to this driver had been tree-wide
refactoring since git era begun. The driver is using virt_to_bus()
we should make it use more modern DMA APIs but since it's unlikely
to be getting any use these days delete it instead. We can always
revert to bring it back.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds maintainers and documentation for MediaTek t7xx 5G WWAN modem
device driver.
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch updates the author's email address.
Link: https://lore.kernel.org/all/e4396244da6b008c671def9f50bb983a10389863.1650816929.git.pisa@cmp.felk.cvut.cz
Cc: Odrej Ille <ondrej.ille@gmail.com>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
[mkl: split into separate patches]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch adds the ctucanfd-driver document to the index.
Link: https://lore.kernel.org/all/e4396244da6b008c671def9f50bb983a10389863.1650816929.git.pisa@cmp.felk.cvut.cz
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
[mkl: split into separate patches]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Looks like all the changes to this driver had been automated
churn since git era begun. The driver is using virt_to_bus(),
it's just a maintenance burden unlikely to have any users.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CTU CAN FD IP core documentation based on Martin Jeřábek's diploma theses
Open-source and Open-hardware CAN FD Protocol Support
https://dspace.cvut.cz/handle/10467/80366
.
Link: https://lore.kernel.org/all/692b965999ff6c272239df0fe1c76b68d02b134d.1647932262.git.pisa@cmp.felk.cvut.cz
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Martin Jerabek <martin.jerabek01@gmail.com>
Signed-off-by: Ondrej Ille <ondrej.ille@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add driver framework and device setup and initialization for Octeon
PCI Endpoint NIC.
Add implementation to load module, initilaize, register network device,
cleanup and unload module.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add initial documentation for Flexcan driver.
Link: https://lore.kernel.org/all/20220107193105.1699523-8-mkl@pengutronix.de
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add the container for CAN drivers documentation.
Link: https://lore.kernel.org/all/20220107193105.1699523-7-mkl@pengutronix.de
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
LLQ entry length is 128 bytes. Therefore the maximum header in
the entry is calculated by:
tx_max_header_size =
LLQ_ENTRY_SIZE - DESCRIPTORS_NUM_BEFORE_HEADER * 16 =
128 - 2 * 16 = 96
This patch updates the documentation so that it states the correct
max header length.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DPNI object should get its own header, like the rest of the objects.
Fixes: 60b91319a349 ("staging: fsl-mc: Convert documentation to rst format")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit a296d665eae1 ("ixgbe: Add ethtool support to enable 2.5 and 5.0
Gbps support") introduced suppression of the advertisement of NBASE-T
speeds by default, according to Todd Fujinaka to accommodate customers
with network switches which could not cope with advertised NBASE-T
speeds, as posted in the E1000-devel mailing list:
https://sourceforge.net/p/e1000/mailman/message/37106269/
However, the suppression was not documented at all, nor was how to
enable NBASE-T support.
Properly document the NBASE-T suppression and how to enable NBASE-T
support.
Fixes: a296d665eae1 ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support")
Reported-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add SF device add and delete specific trace points.
echo mlx5:mlx5_sf_dev_add >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_dev_del >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_vhca_event >> /sys/kernel/debug/tracing/set_event
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add support for trace events for SFs to improve debugging.
This covers
(a) port add and free trace points
(b) device level trace points
(c) SF hardware context add, free trace points.
(d) SF function activate/deacticate and state trace points
SF events examples:
echo mlx5:mlx5_sf_add >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_free >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_hwc_alloc >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_hwc_free >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_hwc_deferred_free >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_update_state >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_activate >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_deactivate >> /sys/kernel/debug/tracing/set_event
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
Maher Sanalla
Tony Nguyen
Dragos Tatulea
Jakub Kicinski
Gal Pressman
Linus Torvalds
Jiawen Wu
Rahul Rameshbabu
Ross Zwisler
Randy Dunlap
Michal Wilczynski
Arkadiusz Kubalewski
Shay Drory
Yishai Hadas
Vladimir Oltean
Walter Heymans
Veerasenareddy Burru
Dario Binacchi
Mengyuan Lou
Karol Kolacinski
David S. Miller
Max Staudt
Akira Yokosawa
Ricardo Martinez
Pavel Pisa
Arthur Kiyanovski
Sean Anderson
Robert Schlabbach
Parav Pandit