aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/gpu
AgeCommit message (Collapse)Author
2020-06-17drm/amdgpu: fix documentation around busy_percentageAlex Deucher
Add rename the gpu busy percentage for consistency and add the mem busy percentage documentation. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-20Merge tag 'drm-intel-next-2020-05-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - drm/i915: Show per-engine default property values in sysfs By providing the default values configured into the kernel via sysfs, it is much more convenient for userspace to restore those sane defaults, or at least know what are considered good baseline. This is useful, for example, to cleanup after any failed userspace prior to commencing new jobs. Cross-subsystem Changes: - video/hdmi: Add Unpack only function for DRM infoframe - Includes pull request gvt-next-2020-05-12 Driver Changes: - Restore Cherryview back to full-ppgtt (Chris, Mika) - Document locking guidelines for i915 (Chris, Daniel, Joonas) - Fix GitLab #1746: Handle idling during i915_gem_evict_something busy loops (Chris) - Display WA #1105: Require linear fb stride to be multiple of 512 bytes on gen9/glk (Ville) - Add Wa_14010685332 for ICP/ICL (Matt R) - Restrict w/a 1607087056 for EHL/JSL (Swathi) - Fix interrupt handling for DP AUX transactions on Tigerlake (Imre) - Revert "drm/i915/tgl: Include ro parts of l3 to invalidate" (Mika) - Fix HDC pipeline flush hardware bit on Gen12 (Mika) - Flush L3 when flushing render on Gen12 (Mika) - Invalidate aux table entries forcibly between BB on Gen12 (Mika) - Add aux table invalidate for all engines on Gen12 (Mika) - Force pte cacheline to main memory Gen8+ (Mika) - Add and enable TGL+ SAGV support (Stanislav) - Implement vm_ops->access on i915 mmaps for GDB (Chris, Kristian) - Replace zero-length array with flexible-array (Gustavo) - Improve batch buffer pool effectiveness to mitigate soft-rc6 hit (Chris) - Remove wait priority boosting (Chris) - Keep driver module referenced when PMU is active (Chris) - Sanitize RPS interrupts upon resume (Chris) - Extend pcode read timeout to 20 ms (Chris) - Wait for ACT sent before enabling MST pipe (Ville) - Extend support to async relocations to SNB (Chris) - Remove CNL pre-prod workarounds (Ville) - Don't enable WaIncreaseLatencyIPCEnabled when IPC is disabled (Sultan) - Record the active CCID from before reset (Chris) - Mark concurrent submissions with a weak-dependency (Chris) - Peel dma-fence-chains for await to allow engine-to-engine sync (Lionel) - Prevent using semaphores to chain up to external fences (Chris) - Fix GLK watermark calculations (Ville) - Emit await(batch) before MI_BB_START (Chris) - Reset execlists registers before HWSP (Chris) - Drop no-semaphore boosting in favor of fast timeslicing (Chris) - Fix enabled infoframe states of lspcon (Gwan-gyeong) - Program DP SDPs on pipe updates (Gwan-gyeong) - Stop sending DP SDPs on ddi disable (Gwan-gyeong) - Store CS timestamp frequency in Hz (Ville) - Remove unused HAS_FWTABLE macro (Pascal) - Use batchbuffer chaining for relocations to save ring space (Chris) - Try different engines for relocs if MI ops not supported (Chris, Tvrtko) - Lazily acquire the device wakeref for freeing objects (Chris) - Streamline display code arithmetics around rounding etc. (Ville) - Use bw state for per crtc SAGV evaluation (Stanislav) - Track active_pipes in bw_state (Stanislav) - Nuke mode.vrefresh usage (Ville) - Warn if the FBC is still writing to stolen on removal (Chris) - Added new PCode commands prepping for QGV rescricting (Stansilav) - Stop holding onto the pinned_default_state (Chris) - Propagate error from completed fences (Chris) - Ignore submit-fences on the same timeline (Chris) - Pull waiting on an external dma-fence into its routine (Chris) - Replace the hardcoded I915_FENCE_TIMEOUT with Kconfig (Chris) - Mark up the racy read of execlists->context_tag (Chris) - Tidy up the return handling for completed dma-fences (Chris) - Introduce skl_plane_wm_level accessor (Stanislav) - Extract SKL SAGV checking (Stanislav) - Make active_pipes check skl specific (Stanislav) - Suspend tasklets before resume sanitization (Chris) - Remove redundant exec_fence (Chris) - Mark the addition of the initial-breadcrumb in the request (Chris) - Transfer old virtual breadcrumbs to irq_worker (Chris) - Read the DP SDPs from the video DIP (Gwan-gyeong) - Program DP SDPs with computed configs (Gwan-gyeong) - Add state readout for DP VSC and DP HDR Metadata Infoframe SDP (Gwan-gyeong) - Add compute routine for DP PSR VSC SDP (Gwan-gyeong) - Use new DP VSC SDP compute routine on PSR (Gwan-gyeong) - Restrict qgv points which don't have enough bandwidth. (Stanislav) - Nuke pointless div by 64bit (Ville) - Static checker code fixes (Nathan, Mika, Chris) - Add logging function for DP VSC SDP (Gwan-gyeong) - Include HDMI DRM infoframe, DP HDR metadata and DP VSC SDP in the crtc state dump (Gwan-gyeong) - Make timeslicing explicit engine property (Chris, Tvrtko) - Selftest and debugging improvements (Chris) - Align variable names with BSpec (Ville) - Tidy up gen8+ breadcrumb emission code (Chris) - Turn intel_digital_port_connected() in a vfunc (Ville) - Use stashed away hpd isr bits in intel_digital_port_connected() (Ville) - Extract i915_cs_timestamp_{ns_to_ticks,tick_to_ns}() (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200515160703.GA19043@jlahtine-desk.ger.corp.intel.com
2020-05-14drm/i915: Document locking guidelinesJoonas Lahtinen
To ensure cross-driver locking compatibility, document the expected guidelines for implementing the GEM locking in i915. Note that this is a description of how things should end up after being reworked, and does not reflect the current state of things. v2: Use rst note:: tag (Rodrigo) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Airlie <airlied@redhat.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: CQ Tang <cq.tang@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190830105053.17491-1-joonas.lahtinen@linux.intel.com
2020-05-08Merge tag 'drm-misc-next-2020-05-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.8: UAPI Changes: Cross-subsystem Changes: * MAINTAINERS: restore alphabetical order; update cirrus driver * Dcomuentation: document visionix, chronteli, ite vendor prefices; update documentation for Chrontel CH7033, IT6505, IVO, BOE, Panasonic, Chunghwa, AUO bindings; convert dw_mipi_dsi.txt to YAML; remove todo item for drm_display_mode.hsync removal; Core Changes: * drm: add devm_drm_dev_alloc() for managed allocations of drm_device; use DRM_MODESET_LOCK_ALL_*() in mode-object code; remove drm_display_mode.hsync; small cleanups of unused variables, compiler warnings and static functions * drm/client: dual-lincensing: GPL-2.0 or MIT * drm/mm: optimize tree searches in rb_hole_addr() Driver Changes: * drm/{many}: use devm_drm_dev_alloc(); don't use drm_device.dev_private * drm/ast: don't double-assign to drm_crtc_funcs.set_config; drop drm_connector_register() * drm/bochs: drop drm_connector_register() * drm/bridge: add support for Chrontel ch7033; fix stack usage with old gccs; return error pointer in drm_panel_bridge_add() * drm/cirrus: Move to tiny * drm/dp_mst: don't use 2nd sideband tx slot; revert "Remove single tx msg restriction" * drm/lima: support runtime PM; * drm/meson: limit modes wrt chipset * drm/panel: add support for Visionox rm69299; fix clock on boe-tv101wum-n16; fix panel type for AUO G101EVN10; add support for Ivo M133NFW4 R0; add support for BOE NV133FHM-N61; add support for AUO G121EAN01.4, G156XTN01.0, G190EAN01 * drm/pl111: improve vexpress init; fix module auto-loading * drm/stm: read number of endpoints from device tree * drm/vboxvideo: use managed PCI functions; drop DRM_MTRR_WC * drm/vkms: fix use-after-free in vkms_gem_create(); enable cursor support by default * fbdev: use boolean values in several drivers * fbdev/controlfb: fix COMPILE_TEST * fbdev/w100fb: fix double-free bug Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200507072503.GA10979@linux-uq9g
2020-04-30Merge tag 'amd-drm-next-5.8-2020-04-24' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-next-5.8-2020-04-24: amdgpu: - Documentation improvements - Enable FRU chip access on boards that support it - RAS updates - SR-IOV updates - Powerplay locking fixes for older SMU versions - VCN DPG (dynamic powergating) cleanup - VCN 2.5 DPG enablement - Rework GPU scheduler handling - Improve scheduler priority handling - Add SPM (streaming performance monitor) golden settings for navi - GFX10 clockgating fixes - DC ABM (automatic backlight modulation) fixes - DC cursor and plane fixes - DC watermark fixes - DC clock handling fixes - DC color management fixes - GPU reset fixes - Clean up MMIO access macros - EEPROM access fixes - Misc code cleanups amdkfd: - Misc code cleanups radeon: - Clean up safe reg list generation - Misc code cleanups From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200424190827.4542-1-alexander.deucher@amd.com
2020-04-29drm: Nuke mode->hsyncVille Syrjälä
Let's just calculate the hsync rate on demand. No point in wasting space storing it and risking the cached value getting out of sync with reality. v2: Move drm_mode_hsync() next to its only users Drop the TODO Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> #v1 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-2-ville.syrjala@linux.intel.com
2020-04-22Merge tag 'drm-misc-next-2020-04-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.8: UAPI Changes: - drm: error out with EBUSY when device has existing master - drm: rework SET_MASTER and DROP_MASTER perm handling Cross-subsystem Changes: - mm: export two symbols from slub/slob - fbdev: savage: fix -Wextra build warning - video: omap2: Use scnprintf() for avoiding potential buffer overflow Core Changes: - Remove drm_pci.h - drm_pci_{alloc/free)() are now legacy - Introduce managed DRM resourcesA - Allow drivers to subclass struct drm_framebuffer - Introduce struct drm_afbc_framebuffer and helpers - fbdev: remove return value from generic fbdev setup - Introduce simple-encoder helper - vram-helpers: set fence on plane - dp_mst: ACT timeout improvements - dp_mst: Remove drm_dp_mst_has_audio() - TTM: ttm_trace_dma_{map/unmap}() cleanups - dma-buf: add flag for PCIP2P support - EDID: Various improvements - Encoder: cleanup semantics of possible_clones and possible_crtcs - VBLANK documentation updates - Writeback documentation updates Driver Changes: - Convert several drivers to i2c_new_client_device() - Drop explicit drm_mode_config_cleanup() calls from drivers - Auto-release device structures with drmm_add_final_kfree() - Init bfdev console after registering DRM device - Make various .debugfs functions return 0 unconditionally; ignore errors - video: Use scnprintf() to avoid buffer overflows - Convert drivers to simple encoders - drm/amdgpu: note that we can handle peer2peer DMA-buf - drm/amdgpu: add support for exporting VRAM using DMA-buf v3 - drm/kirin: Revert change to register connectors - drm/lima: Add optional devfreq and cooling device support - drm/lima: Various improvements wrt. task handling - drm/panel: nt39016: Support multiple modes and 50Hz - drm/panel: Support Leadtek LTK050H3146W - drm/rockchip: Add support for afbc - drm/virtio: Various cleanups - drm/hisilicon/hibmc: Enforce 128-byte stride alignment - drm/qxl: Fix notify port address of cursor ring buffer - drm/sun4i: Improvements to format handling - drm/bridge: dw-hdmi: Various improvements Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200414090738.GA16827@linux-uq9g
2020-04-16Merge drm/drm-next into drm-intel-next-queuedJoonas Lahtinen
Backmerging in order to pull "topic/phy-compliance". Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-04-09drm/vram-helpers: Merge code into a single fileThomas Zimmermann
Most of the documentation was in an otherwise empty file, which was probably just left from a previous clean-up effort. So move code and documentation into a single file. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200331081238.24749-1-tzimmermann@suse.de
2020-04-07drm/writeback: wire drm_writeback.h to kernel-docSam Ravnborg
drm_writeback.h included a lot of nice kernel-doc comments. Wire it up so the header file is included in the kernel-doc generated documentation. Added a few simple comments to the two structs so they get picked up by kernel-doc. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200406194746.26433-4-sam@ravnborg.org
2020-04-01drm/amdgpu: Add documentation for unique_idKent Russell
Add the amdgpu.rst tie-ins for the unique_id documentation Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: Add documentation for PCIe accountingKent Russell
Add the amdgpu.rst tie-ins for the pcie accounting documentation Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: Add documentation for memory infoKent Russell
Add the amdgpu.rst tie-ins for the mem_info documentation Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amdgpu: Enable reading FRU chip via I2C v3Kent Russell
Allow for reading of information like manufacturer, product number and serial number from the FRU chip. Report the serial number as the new sysfs file serial_number. Note that this only works on server cards, as consumer cards do not feature the FRU chip, which contains this information. v2: Add documentation to amdgpu.rst, add helper functions, rename functions for consistency, fix bad starting offset v3: Remove testing definitions Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/core: Calculate bpp in afbc helperAndrzej Pietrasiewicz
Some drivers (komeda, malidp) don't set anything in cpp. If that is the case the right value can be inferred from the format. Then the "bpp" member can be eliminated from struct drm_afbc_framebuffer. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200331155308.6345-3-andrzej.p@collabora.com
2020-03-26drm: Add docs for managed resourcesDaniel Vetter
All collected together to provide a consistent story in one patch, instead of the somewhat bumpy refactor-evolution leading to this. Also some thoughts on what the next steps could be: - Create a macro called devm_drm_dev_alloc() which essentially wraps the kzalloc(); devm_drm_dev_init(); drmm_add_final_kfree() combo. Needs to be a macro since we'll have to do some typeof trickery and casting to make this fully generic for all drivers that embed struct drm_device into their own thing. - A lot of the simple drivers now have essentially just drm_dev_unplug(); drm_atomic_helper_shutdown(); as their $bus_driver->remove hook. We could create a devm_mode_config_reset which sets drm_atomic_helper_shutdown as it's cleanup action, and a devm_drm_dev_register with drm_dev_unplug as it's cleanup action, and simple drivers wouldn't have a need for a ->remove function at all, and we could delete them. - For more complicated drivers we need drmm_ versions of a _lot_ more things. All the userspace visible objects (crtc, plane, encoder, crtc), anything else hanging of those (maybe a drmm_get_edid, at least for panels and other built-in stuff). Also some more thoughts on why we're not reusing devm_ with maybe a fake struct device embedded into the drm_device (we can't use the kdev, since that's in each drm_minor). - Code review gets extremely tricky, since every time you see a devm_ you need to carefully check whether the fake device (with the drm_device lifetim) or the real device (with the lifetim of the underlying physical device and driver binding) are used. That's not going to help at all, and we have enormous amounts of drivers who use devm_ where they really shouldn't. Having different types makes sure the compiler type checks this for us and ensures correctness. - The set of functions are very much non-overlapping. E.g. devm_ioremap makes total sense, drmm_ioremap has the wrong lifetime, since hw resources need to be cleaned out at driver unbind and wont outlive that like a drm_device. Similar, but other way round for drmm_connector_init (which is the only correct version, devm_ for drm_connector is just buggy). Simply not having the wrong version again prevents bugs. Finally I guess this opens a huge todo for all the drivers. I'm semi-tempted to do a tree-wide s/devm_kzalloc/drmm_kzalloc/ since most likely that'll fix an enormous amount of bugs and most likely not cause any issues at all (aside from maybe holding onto memory slightly too long). v2: - Doc improvements from Laurent. - Also add kerneldoc for the new drmm_add_action_or_reset. v3: - Remove kerneldoc for drmm_remove_action. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> fixup docs Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-52-daniel.vetter@ffwll.ch
2020-03-26drm: Manage drm_mode_config_init with drmm_Daniel Vetter
drm_mode_config_cleanup is idempotent, so no harm in calling this twice. This allows us to gradually switch drivers over by removing explicit drm_mode_config_cleanup calls. With this step it's now also possible that (at least for simple drivers) automatic resource cleanup can be done correctly without a drm_driver->release hook. Therefore allow this now in devm_drm_dev_init(). Also with drmm_ explicit drm_driver->release hooks are kinda not the best option: Drivers can always just register their current release hook with drmm_add_action, but even better they could split them up to simplify the unwinding for the driver load failure case. So deprecate that hook to discourage future users. v2: Fixup the example in the kerneldoc too. v3: - For paranoia, double check that minor->dev == dev in the release hook, because I botched the pointer math in the drmm library. - Call drm_mode_config_cleanup when drmm_add_action fails, we'd be missing some mutex_destroy and ida_cleanup otherwise (Laurent) v4: Add a drmm_add_action_or_reset (like devm_ has) to encapsulate this pattern (Noralf). v5: Fix oversight in the new drmm_add_action_or_reset macro (Noralf) v4: Review from Sam: - drmm_mode_config_init wrapper (also suggested by Thomas) - improve commit message, explain better why ->relase is deprecated v5: - Make drmm_ the main function, with the old one as compat wrapper (Sam) - Add FIXME comments to drm_mode_config_cleanup/init() that drivers shouldn't use these anymore. - Move drmm_add_action_or_reset helper to an earlier patch. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-27-daniel.vetter@ffwll.ch
2020-03-26Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst
Requested for getting some i915 fixes back into drm-misc-next by danvet. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2020-03-26drm: add managed resources tied to drm_deviceDaniel Vetter
We have lots of these. And the cleanup code tends to be of dubious quality. The biggest wrong pattern is that developers use devm_, which ties the release action to the underlying struct device, whereas all the userspace visible stuff attached to a drm_device can long outlive that one (e.g. after a hotunplug while userspace has open files and mmap'ed buffers). Give people what they want, but with more correctness. Mostly copied from devres.c, with types adjusted to fit drm_device and a few simplifications - I didn't (yet) copy over everything. Since the types don't match code sharing looked like a hopeless endeavour. For now it's only super simplified, no groups, you can't remove actions (but kfree exists, we'll need that soon). Plus all specific to drm_device ofc, including the logging. Which I didn't bother to make compile-time optional, since none of the other drm logging is compile time optional either. One tricky bit here is the chicken&egg between allocating your drm_device structure and initiliazing it with drm_dev_init. For perfect onion unwinding we'd need to have the action to kfree the allocation registered before drm_dev_init registers any of its own release handlers. But drm_dev_init doesn't know where exactly the drm_device is emebedded into the overall structure, and by the time it returns it'll all be too late. And forcing drivers to be able clean up everything except the one kzalloc is silly. Work around this by having a very special final_kfree pointer. This also avoids troubles with the list head possibly disappearing from underneath us when we release all resources attached to the drm_device. v2: Do all the kerneldoc at the end, to avoid lots of fairly pointless shuffling while getting everything into shape. v3: Add static to add/del_dr (Neil) Move typo fix to the right patch (Neil) v4: Enforce contract for drmm_add_final_kfree: Use ksize() to check that the drm_device is indeed contained somewhere in the final kfree(). Because we need that or the entire managed release logic blows up in a pile of use-after-frees. Motivated by a discussion with Laurent. v5: Review from Laurent: - %zu instead of casting size_t - header guards - sorting of includes - guarding of data assignment if we didn't allocate it for a NULL pointer - delete spurious newline - cast void* data parameter correctly in ->release call, no idea how this even worked before v6: Review from Sam - Add the kerneldoc for the managed sub-struct back in, even if it doesn't show up in the generated html somehow. - Explain why __always_inline. - Fix bisectability around the final kfree() in drm_dev_relase(). This is just interim code which will disappear again. - Some whitespace polish. - Add debug output when drmm_add_action or drmm_kmalloc fail. v7: My bisectability fix wasn't up to par as noticed by smatch. v8: Remove unecessary {} around if else v9: Use kstrdup_const, which requires kfree_const and introducing a free_dr() helper (Thomas). v10: kfree_const goes boom on the plain "kmalloc" assignment, somehow we need to wrap that in kstrdup_const() too!! Also renumber revision log, I somehow reset it midway thruh. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Neil Armstrong <narmstrong@baylibre.com Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200324124540.3227396-1-daniel.vetter@ffwll.ch
2020-03-19Merge tag 'drm-intel-next-2020-03-13' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: On i915 we have a new UAPI to allow userspace to specify CS ring buffer size on construction (I915_CONTEXT_PARAM_RINGSIZE) and also new sysfs entries exposing various engine properties GVT Changes: VFIO edid getting expanded to all platforms and a big cleanup around attr group, unused vblank complete, kvmgt, Intel engine and dev_priv usages. i915 Changes: - new UAPI to allow userspace to specify CS ring buffer size on construction (I915_CONTEXT_PARAM_RINGSIZE) - (Chris) - New sysfs entries exposing various engine properties (Chris) - Tiger Lake is out of require_force_probe protection (Jose) - Changes in many places around active requests, reset and heartbeat (Chris) - Stop assigning drm-dev_private pointer (Jani) - Many code refactor in many places, including intel_modeset_init, increasing use of intel_uncore_*, vgpu, and gvt stuff (Jani) - Fixes around display pipe iterators (Anshuman) - Tigerlake enabling work (Matt Ropper, Matt Atwood, Ville, Lucas, Daniele, Jose, Anusha, Vivek, Swathi, Caz. Kai) - Code clean-up like reducing use of drm/i915_drv.h, removing unused registers, removing garbage warns, and some other code polishing (Jani, Lucas, Ville) - Selftests fixes, improvements and additions (Chris, Dan, Aditya, Matt Auld) - Fix plane possible_crtcs bit mask (Anshuman) - Fixes and cleanup on GLK pre production identification and w/a (Ville) - Fix display orientation on few cases (Hans, Ville) - dbuf clean-up and improvements for slice arrays handling (Ville) - Improvement around min cdclk calculation (Stanislav) - Fixes and refactor around display PLLs (Imre) - Other execlists and perf fixes (Chris) - Documentation fixes (Jani, Chris) - Fix build issue (Anshuman) - Many more fixes around the locking mechanisms (Chris) - Other fixes and debugability info around preemption (Chris, Tvrtko) - Add mechanism to submit a context WA on ring submission (Mika) - Clear all Eu/L3 resitual context (Prathap) - More changes around local memory (Abdiel, Matt, Chris) - Fix RPS (Chris) - DP MST fix (Lyude) - Display FBC fixes (Jose, RK) - debugfs cleanup (Tvrtko) - More convertion towards drm_debive based loggin (Wambui, Ram) - Avoid potential buffer overflow (Takashi) - Ice Lake and Elkhart Lake workarounds (Matt Roper) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200314001535.GA2969344@intel.com
2020-03-18drm/core: Add drm_afbc_framebuffer and a corresponding helperAndrzej Pietrasiewicz
The new struct contains afbc-specific data. The new function can be used by drivers which support afbc to complete the preparation of struct drm_afbc_framebuffer. It must be called after allocating the said struct and calling drm_gem_fb_init_with_funcs(). Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: James Qian Wang <james.qian.wang@arm.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200311145541.29186-3-andrzej.p@collabora.com
2020-03-17drm/i915: Fix up documentation paths after file movingChris Wilson
Redirect references to i915_gem_fence_reg.c to gt/intel_ggtt_fencing.c Fixes: dec9cf9ee8cb ("drm/i915/gt: Pull restoration of GGTT fences underneath the GT") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200317141250.20903-1-chris@chris-wilson.co.uk
2020-03-06drm/todo: Update drm_fb_helper tasksPankaj Bharadiya
drm_fb_helper tasks are completed now hence remove them from todo list. Changes since v1: * remove entire drm_fb_helper tasks from todo list. Daniel's "64914da24ea9 drm/fbdev-helper: don't force restores" already fixes first one (Daniel) Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-8-pankaj.laxminarayan.bharadiya@intel.com
2020-03-03drm/i915: Fix doclinksChris Wilson
Update locations for ./drivers/gpu/drm/i915/i915_vma.h:1: warning: 'Virtual Memory Address' not found ./drivers/gpu/drm/i915/i915_gem_gtt.c:1: warning: 'Global GTT views' not found Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200302145254.520447-1-chris@chris-wilson.co.uk
2020-03-03drm/i915: fix documentation build after renameJani Nikula
intel_csr.c was moved under display. Fixes: 06d3ff6e7451 ("drm/i915: move intel_csr.[ch] under display/") Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200302170218.16496-1-jani.nikula@intel.com
2020-02-26drm: Add helper to create a connector for a chain of bridgesLaurent Pinchart
Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues: - It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model. - It requires every bridge driver to implement similar connector handling code, resulting in code duplication. - It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver). In order to solve these issues, ownership of the connector needs to be moved to the display controller driver. To avoid code duplication in display controller drivers, add a new helper to create and manage a DRM connector backed by a chain of bridges. All connector operations are delegating to the appropriate bridge in the chain. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-21-laurent.pinchart@ideasonboard.com
2020-02-26drm/bridge: Improve overview documentationLaurent Pinchart
Clean up the drm_bridge overview documentation, and expand the operations documentation to provide more details on API usage. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-7-laurent.pinchart@ideasonboard.com
2020-02-26drm/edid: Add flag to drm_display_info to identify HDMI sinksLaurent Pinchart
The drm_display_info structure contains many fields related to HDMI sinks, but none that identifies if a sink compliant with CEA-861 (EDID) shall be treated as an HDMI sink or a DVI sink. Add such a flag, and populate it according to section 8.3.3 ("DVI/HDMI Device Discrimination") of the HDMI v1.3 specification. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-4-laurent.pinchart@ideasonboard.com
2020-01-28drm/todo: Add item for the plane->atomic_check confusionDaniel Vetter
It's frankly a mess, and the confusion around plane_state->crtc/fb that I fixed up in this series is the least of the problems. Add a todo as a future note of how this could be done a lot better, and with a lot less driver confusion. Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-1-daniel.vetter@ffwll.ch
2020-01-03Merge tag 'drm-misc-next-2020-01-02' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.6: UAPI Changes: - Commandline parser: Add support for panel orientation, and per-mode options. - Fix IOCTL naming for dma-buf heaps. Cross-subsystem Changes: - Rename DMA_HEAP_IOC_ALLOC to DMA_HEAP_IOCTL_ALLOC before it becomes abi. - Change DMA-BUF system-heap's name to system. - Fix leak in error handling in dma_heap_ioctl(), and make a symbol static. - Fix udma-buf cpu access. - Fix ti devicetree bindings. Core Changes: - Add CTA-861-G modes with VIC >= 193. - Change error handling and remove bug_on in *drm_dev_init. - Export drm_panel_of_backlight() correctly once more. - Add support for lvds decoders. - Convert drm/client and drm/(gem-,)fb-helper to drm-device based logging and update logging todo. Driver Changes: - Add support for dsi/px30 to rockchip. - Add fb damage support to virtio. - Use dma_resv locking wrappers in vc4, msm, etnaviv. - Make functions in virtio static, and perform some simplifications. - Add suspend support to sun4i. - Add A64 mipi dsi support to sun4i. - Add runtime pm suspend to komeda. - Associated driver fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/efc11139-1653-86bc-1b0f-0aefde219850@linux.intel.com
2019-12-27Merge tag 'drm-intel-next-2019-12-23' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next i915 features for v5.6: - Separate hardware and uapi state (Maarten) - Expose a number of sprite and plane formats (Ville) - DDC symlink in HDMI connector sysfs directory (Andrzej Pietrasiewicz) - Improve obj->mm.lock nesting lock annotation (Daniel) (Includes lockdep changes) - Selftest improvements across the board (Chris) - ICL/TGL VDSC support on DSI (Jani, Vandita) - TGL DSB fixes (Animesh, Lucas, Tvrtko) - VBT parsing improvements and fixes (Lucas, Matt, José, Jani, Dan Carpenter) - Fix LPSS vs. PMIC PWM backlight use on BYT/CHT (Hans) (Includes ACPI+MFD changes) - Display state, crtc, plane code refactoring (Ville) - Set opregion chpd value to indicate the driver handles hotplug (Hans de Goede) - DSI updates and fixes, TGL pipe D support, port mapping (José, Jani, Vandita) - Make HDCP 2.2 support cover CFL (Juston Li) - Fix CML PCI IDs and ULT (Shawn Lee) - CMP-V PCH fix (Imre) - TGL: Add another TGL PCH ID (James) - EHL/JSL: Add new PCI IDs (James) - Rename pipe update tracepoints (Ville) - Fix FBC on GLK+ (Ville) - GuC fixes and improvements (Daniele, Don Hiatt, Stuart Summers, Matthew Brost) - Display debugfs improvements (Ville) - Hotplug/irq fixes (Matt) - PSR fixes and improvements (José) - DRM_I915_GEM_MMAP_OFFSET ioctl (Abdiel) - Static analysis fixes (Colin Ian King) - Register sysctl path globally (Venkata Sandeep Dhanalakota) - Introduce new macros for tracing (Venkata Sandeep Dhanalakota) - Migrate gt towards intel_uncore_read/write (Andi) - Add rps frequency translation helpers (Andi) - Fix TGL transcoder clock off sequence (José) - Fix TGL port A audio (Kai Vehmanen) - TGL render decompression (DK) - GEM/GT improvements and fixes across the board (Chris) - Couple of backmerges (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Tue 24 Dec 2019 03:20:48 AM AEST # gpg: using RSA key D398079D26ABEE6F # gpg: Good signature from "Jani Nikula <jani.nikula@intel.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 1565 A65B 77B0 632E 1124 E59C D398 079D 26AB EE6F # Conflicts: # drivers/gpu/drm/i915/display/intel_fbc.c # drivers/gpu/drm/i915/gt/intel_lrc.c # drivers/gpu/drm/i915/i915_gem.c From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87lfr3rkry.fsf@intel.com
2019-12-19drm/todo: Updating logging todoDaniel Vetter
Jani has merged a new set of logging functions, which we hope to be the One True solution now, pinky promises: commit fb6c7ab8718eb2543695d77ad8302ff81e8e1e32 Author: Jani Nikula <jani.nikula@intel.com> Date: Tue Dec 10 14:30:43 2019 +0200 drm/print: introduce new struct drm_device based logging macros Update the todo entry to match the new preference. v2: Fix spelling issue Sam noticed. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Sean Paul <sean@poorly.run> Cc: Wambui Karuga <wambui.karugax@gmail.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191219161722.2779994-1-daniel.vetter@ffwll.ch
2019-12-17Merge tag 'drm-misc-next-2019-12-16' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
2019-12-10drm/doc: Drop :c:func: markupDaniel Vetter
Kernel sphinx has learned how to do that in commit d74b0d31dddeac2b44c715588d53d9a1e5b1158e Author: Jonathan Corbet <corbet@lwn.net> Date: Thu Apr 25 07:55:07 2019 -0600 Docs: An initial automarkup extension for sphinx Unfortunately it hasn't learned that yet for structures, so we're stuck with the :c:type: noise for now still. Reviewed-by: Thierry Reding <treding@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191204101933.861169-1-daniel.vetter@ffwll.ch
2019-12-10drm/atomic: Update docs around locking and commit sequencingDaniel Vetter
Both locking and especially sequencing of nonblocking commits have evolved a lot. The details are all there, but I noticed that the big picture and connections have fallen behind a bit. Apply polish. Motivated by some review discussions with Thierry. v2: Review from Thierry Reviewed-by: Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191204100011.859468-1-daniel.vetter@ffwll.ch
2019-12-09drm/i915/guc: kill the GuC clientDaniele Ceraolo Spurio
We now only use 1 client without any plan to add more. The client is also only holding information about the WQ and the process desc, so we can just move those in the intel_guc structure and always use stage_id 0. v2: fix comment (John) v3: fix the comment for real, fix kerneldoc Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-4-daniele.ceraolospurio@intel.com
2019-12-05drm/doc: Add VKMS module description and use to "Testing and Validation"Gabriela Bittencourt
Add a description on VKMS module and the cases in which it should be used. There's a brief explanation on how to set it and use it in a VM, along with an example of running an igt-test. Changes since V3: Rodrigo: - Change the log message to imperative - Fix some bad spelling/writing - Add a blank line before enumeration Changes since V2: Andre: - Avoid repetition of words in the same sentence; - Make the explanation on 'setting the kernel' shorter, eliminate the 'make menuconfig' command; - Add tab on enumeration to have one line per item; - Clarify from each machine igt-tests commands should be ran on. Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191104162705.19735-1-gabrielabittencourt00@gmail.com
2019-11-29drm: Inline drm_color_lut_extract()Ville Syrjälä
This thing can get called several thousand times per LUT so seems like we want to inline it to: - avoid the function call overhead - allow constant folding A quick synthetic test (w/o any hardware interaction) with a ridiculously large LUT size shows about 50% reduction in runtime on my HSW and BSW boxes. Slightly less with more reasonable LUT size but still easily measurable in tens of microseconds. v2: Include drm_color_mgmt.h in the .rst (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191108135654.12907-1-ville.syrjala@linux.intel.com
2019-11-29drm/todo: Add entry for fb funcs related cleanupsDaniel Vetter
We're doing a great job for really simple drivers right now, but still a lot of boilerplate for the bigger ones. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191127180035.416209-3-daniel.vetter@ffwll.ch
2019-11-07drm/todo: Convert drivers to generic fbdev emulationThomas Zimmermann
This replaces the original TODO item for drm_fb_helper_fbdev_setup() and _teardown(), which are deprecated. v2: * remove driver-specific comments * list some basic requirements * keep a TODO item on drm_fb_helper_init() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191106124727.11641-2-tzimmermann@suse.de
2019-11-06drm/amdgpu: Improve RAS documentation (v2)Alex Deucher
Clarify some areas, clean up formatting, add section for unrecoverable error handling. v2: fix grammatical errors Reviewed-by: Yong Zhao <yong.zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-04drm/doc: Update IGT documentationLeandro Ribeiro
The IGT documentation in this page is telling us to build it using make. According to commit 67993c1 ("automake: Point builders at meson") from the IGT project, this is deprecated and IGT should be built with meson. Instead of having a documentation for IGT in this page, point to their GitLab README, which should always be up to date. Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191030011211.47942-1-leandrohr@riseup.net
2019-11-04drm/todo: Add entry to remove load/unload hooksDaniel Vetter
They're midlayer, broken, and because of the old gunk, we can't fix them. For examples see the various checks in drm_mode_object.c against dev->registered, which cannot be enforced if the driver still uses the load hook. Unfortunately our biggest driver still uses load/unload, so this would be really great to get fixed. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191023144953.28190-2-daniel.vetter@ffwll.ch
2019-11-04Merge tag 'drm-intel-next-2019-11-01-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Make context persistence optional Allow userspace to tie the context lifetime to FD lifetime, effectively allowing Ctrl-C killing of a process to also clean up the hardware immediately. Compute changes: https://github.com/intel/compute-runtime/pull/228 The compute driver is shipping in Ubuntu. uAPI acked by Mesa folks. - Put future HW and their uAPIs under STAGING & BROKEN Introduces DRM_I915_UNSTABLE Kconfig menu for working on the new uAPI for future HW in upstream. We already disable driver loading by default the platform is deemed ready. This is a second level of protection based on compile time switch (STAGING & BROKEN). - Under DRM_I915_UNSTABLE: Add the fake lmem region on iGFX Fake local memory region on integrated GPU through cmdline: memmap=2G$16G i915.fake_lmem_start=0x400000000 Currently allows testing non-mappable GGTT behavior and running kernel selftest for local memory. Driver Changes: - Fix Bugzilla #112084: VGA external monitor not working (Ville) - Add support for half float framebuffers (Ville) - Add perf support on TGL (Lionel) - Replace hangcheck by heartbeats (Chris) - Allow SPT PCH on all AML devices (James) - Add new CNL PCH for CML platform (Imre) - Allow 100 ms (Kconfig) for workloads to exit before reset (Chris, Jon, Joonas) - Forcibly pre-empt a context after 100 ms (Kconfig) of delay (Chris) - Make timeslice duration Kconfig configurable (Chris) - Whitelist PS_(DEPTH|INVOCATION)_COUNT for Tigerlake (Tapani) - Support creating LMEM objects in kernel (Matt A) - Adjust the location of RING_MI_MODE in the context image for TGL (Chris) - Handle AUX interrupts for TC ports (Matt R) - Add support for devices without mappable GGTT aperture (Daniele) - Rename "inject_load_failure" module parameter to "inject_probe_failure" (Janusz) - Handle fused off HDCP, FBC, DMC and DSC (Jose) - Add support to one DP-MST stream on Tigerlake (Lucas) - Add HuC firmware (and GuC) for TGL (Daniele) - Allow ICL+ DSI on any pipe (Ville) - Check some transcoder timing minimum limits (Ville) - Don't set queue_priority_hint if we don't kick the submission (Chris) - Introduce barrier pulses along engines to flush idle/in-flight requests (Chris) - Drop assertion that ce->pin_mutex guards state updates (Chris) - Cancel banned contexts on schedule-out (Chris) - Cancel contexts when hangchecking is disabled (Chris) - Catch GTT fault errors for gen11+ planes (Matt R) - Print in debugfs if PSR is not enabled because of sink (Jose) - Do not set MOCS control values on dgfx (Lucas) - Setup io-mapping for LMEM (Abdiel) - Support kernel mapping of LMEM objects (Abdiel) - Add LMEM selftests (Matt A) - Initialise PMU spinlock before registering (Chris) - Clear DKL_TX_PMD_LANE_SUS before program TC voltage swing (Jose) - Flip interpretation of ips fmin/fmax to max rps (Chris) - Add VBT compression parameter block definition (Jani) - Limit the blitter sizes to ensure low preemption latency (Chris) - Fixup block_size rounding on BLT (Matt A) - Don't try to place HWS in non-existing mappable region (Michal Wa) - Don't allocate the ring in stolen if we lack aperture (Matt A) - Add AUX B & C to DC_OFF_POWER_DOMAINS for Tigerlake (Matt R) - Avoid HPD poll detect triggering a new detect cycle (Imre) - Document the userspace fail with possible_crtcs (Ville) - Drop lrc header page now unused by GuC (Daniele) - Do not switch aux to TBT mode for non-TC ports (Jose) - Restructure code to avoid depending on i915 but smaller structs (Chris, Tvrtko, Andi) - Remove pm park/unpark notifications (Chris) - Avoid lockdep cross-contamination between object types (Chris) - Restructure DSC code (Jani) - Fix dead locking in early workload shadow (Zhenyu) - Split the legacy submission backend from the common CS ring buffer (Chris) - Move intel_engine_context_in/out into intel_lrc.c (Tvrtko) - Describe perf/wakeref structure members in documentation (Anna) - Update renamed header files names in documentation (Anna) - Add debugs to distingiush a cd2x update from a full cdclk pll update (Ville) - Rework atomic global state locking (Ville) - Allow planes to declare their minimum acceptable cdclk (Ville) - Eliminate skl_check_pipe_max_pixel_rate() and simplify skl_max_scale() (Ville) - Making loglevel of PSR2/SU logs same (Ap) - Capture aux page table error register (Lionel) - Add is_dgfx to device info (Jose) - Split gen11_irq_handler to make it shareable (Lucas) - Encapsulate kconfig constant values inside boolean predicates (Chris) - Split memory_region initialisation into its own file (Chris) - Use _PICK() for CHICKEN_TRANS() and add CHICKEN_TRANS_D (Ville) - Add perf helper macros for comparing with whitelisted registers (Umesh) - Fix i915_inject_load_error() name to read *_probe_* (Janusz) - Drop unused AUX register offsets (Matt R) - Provide more information on DP AUX failures (Matt R) - Add GAM/SFC instdone to error state (Mika) - Always track callers to intel_rps_mark_interactive() (Chris) - Nuke 'mode' argument to intel_get_load_detect_pipe() (Ville) - Simplify LVDS crtc_mask and pipe_mask setup (Ville) - Stop frobbing crtc->base.mode (Ville) - Do s/crtc_mask/pipe_mask/ (Ville) - Split detaching and removing the vma (Chris) - Selftest improvements (Chris, Tvrtko, Mika, Matt A, Lionel) - GuC code improvements (Rob, Andi, Daniele) - Check against i915_selftest only under CONFIG_SELFTEST (Chris) - Refine occupancy test in kill_context() (Chris) - Start kthreads before stopping (Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191101104718.GA14323@jlahtine-desk.ger.corp.intel.com
2019-11-04Merge tag 'drm-misc-next-2019-10-31' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.5: UAPI Changes: -dma-buf: Introduce and revert dma-buf heap (Andrew/John/Sean) Cross-subsystem Changes: - None Core Changes: -dma-buf: add dynamic mapping to allow exporters to choose dma_resv lock state on mmap/munmap (Christian) -vram: add prepare/cleanup fb helpers to vram helpers (Thomas) -ttm: always keep bo's on the lru + ttm cleanups (Christian) -sched: allow a free_job routine to sleep (Steven) -fb_helper: remove unused drm_fb_helper_defio_init() (Thomas) Driver Changes: -bochs/hibmc/vboxvideo: Use new vram helpers for prepare/cleanup fb (Thomas) -amdgpu: Implement dma-buf import/export without drm helpers (Christian) -panfrost: Simplify devfreq integration in driver (Steven) Cc: Christian König <christian.koenig@amd.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Steven Price <steven.price@arm.com> Cc: Andrew F. Davis <afd@ti.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20191031193015.GA243509@art_vandelay
2019-10-30Merge tag 'drm-misc-next-2019-10-24-2' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.5: UAPI Changes: -syncobj: allow querying the last submitted timeline value (David) -fourcc: explicitly defineDRM_FORMAT_BIG_ENDIAN as unsigned (Adam) -omap: revert the OMAP_BO_* flags that were added -- no userspace (Sean) Cross-subsystem Changes: -MAINTAINERS: add Mihail as komeda co-maintainer (Mihail) Core Changes: -edid: a few cleanups, add AVI infoframe bar info (Ville) -todo: remove i915 device_link item and add difficulty levels (Daniel) -dp_helpers: add a few new helpers to parse dpcd (Thierry) Driver Changes: -gma500: fix a few memory disclosure leaks (Kangjie) -qxl: convert to use the new drm_gem_object_funcs.mmap (Gerd) -various: open code dp_link helpers in preparation for helper removal (Thierry) Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Adam Jackson <ajax@redhat.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Kangjie Lu <kjlu@umn.edu> Cc: Mihail Atanassov <mihail.atanassov@arm.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20191024155535.GA10294@art_vandelay
2019-10-28drm/todo: Clarify situation around fbdev and defioThomas Zimmermann
The TODO item is misleading and makes it seem as if fbdev emulation cannot be used with SHMEM. Rephrase the text to describe the current situation more correctly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191025092759.13069-3-tzimmermann@suse.de
2019-10-26Merge tag 'drm-next-5.5-2019-10-09' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-next drm-next-5.5-2019-10-09: amdgpu: - Additional RAS enablement for vega20 - RAS page retirement and bad page storage in EEPROM - No GPU reset with unrecoverable RAS errors - Reserve vram for page tables rather than trying to evict - Fix issues with GPU reset and xgmi hives - DC i2c over aux fixes - Direct submission for clears, PTE/PDE updates - Improvements to help support recoverable GPU page faults - Silence harmless SAD block messages - Clean up code for creating a bo at a fixed location - Initial DC HDCP support - Lots of documentation fixes - GPU reset for renoir - Add IH clockgating support for soc15 asics - Powerplay improvements - DC MST cleanups - Add support for MSI-X - Misc cleanups and bug fixes amdkfd: - Query KFD device info by asic type rather than pci ids - Add navi14 support - Add renoir support - Add navi12 support - gfx10 trap handler improvements - pasid cleanups - Check against device cgroup ttm: - Return -EBUSY with pipelining with no_gpu_wait radeon: - Silence harmless SAD block messages device_cgroup: - Export devcgroup_check_permission Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191010041713.3412-1-alexander.deucher@amd.com
2019-10-25doc: Update header files namesAnna Karas
Update header files containing i915_perf_stream, i915_perf_stream_ops and i915_oa_ops definitions since they have been moved from i915_drv.h to i915_perf_types.h. Cc: Robert Bragg <robert@sixbynine.org> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Anna Karas <anna.karas@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191022100906.16597-1-anna.karas@intel.com
2019-10-23Merge drm/drm-next into drm-misc-nextSean Paul
Parroting Daniel's backmerge justification from 2e79e22e092acd55da0b2db066e4826d7d152c41: Thierry needs fd70c7755bf0 ("drm/bridge: tc358767: fix max_tu_symbol value") to be able to merge his dp_link patch series. Signed-off-by: Sean Paul <seanpaul@chromium.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-26 15:38:23 +0000