summaryrefslogtreecommitdiffstats
path: root/Documentation/ABI
AgeCommit message (Collapse)Author
2014-04-02Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull devicetree changes from Grant Likely: "Updates to devicetree core code. This branch contains the following notable changes: - add reserved memory binding - make struct device_node a kobject and remove legacy /proc/device-tree - ePAPR conformance fixes - update in-kernel DTC copy to version v1.4.0 - preparatory changes for dynamic device tree overlays - minor bug fixes and documentation changes The most significant change in this branch is the conversion of struct device_node to be a kobject that is exposed via sysfs and removal of the old /proc/device-tree code. This simplifies the device tree handling code and tightens up the lifecycle on device tree nodes. [updated: added fix for dangling select PROC_DEVICETREE]" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (29 commits) dt: Remove dangling "select PROC_DEVICETREE" of: Add support for ePAPR "stdout-path" property of: device_node kobject lifecycle fixes of: only scan for reserved mem when fdt present powerpc: add support for reserved memory defined by device tree arm64: add support for reserved memory defined by device tree of: add missing major vendors of: add vendor prefix for SMSC of: remove /proc/device-tree of/selftest: Add self tests for manipulation of properties of: Make device nodes kobjects so they show up in sysfs arm: add support for reserved memory defined by device tree drivers: of: add support for custom reserved memory drivers drivers: of: add initialization code for dynamic reserved memory drivers: of: add initialization code for static reserved memory of: document bindings for reserved-memory nodes Revert "of: fix of_update_property()" kbuild: dtbs_install: new make target ARM: mvebu: Allows to get the SoC ID even without PCI enabled of: Allows to use the PCI translator without the PCI core ...
2014-04-02Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull main powerpc updates from Ben Herrenschmidt: "This time around, the powerpc merges are going to be a little bit more complicated than usual. This is the main pull request with most of the work for this merge window. I will describe it a bit more further down. There is some additional cpuidle driver work, however I haven't included it in this tree as it depends on some work in tip/timer-core which Thomas accidentally forgot to put in a topic branch. Since I didn't want to carry all of that tip timer stuff in powerpc -next, I setup a separate branch on top of Thomas tree with just that cpuidle driver in it, and Stephen has been carrying that in next separately for a while now. I'll send a separate pull request for it. Additionally, two new pieces in this tree add users for a sysfs API that Tejun and Greg have been deprecating in drivers-core-next. Thankfully Greg reverted the patch that removes the old API so this merge can happen cleanly, but once merged, I will send a patch adjusting our new code to the new API so that Greg can send you the removal patch. Now as for the content of this branch, we have a lot of perf work for power8 new counters including support for our new "nest" counters (also called 24x7) under pHyp (not natively yet). We have new functionality when running under the OPAL firmware (non-virtualized or KVM host), such as access to the firmware error logs and service processor dumps, system parameters and sensors, along with a hwmon driver for the latter. There's also a bunch of bug fixes accross the board, some LE fixes, and a nice set of selftests for validating our various types of copy loops. On the Freescale side, we see mostly new chip/board revisions, some clock updates, better support for machine checks and debug exceptions, etc..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits) powerpc/book3s: Fix CFAR clobbering issue in machine check handler. powerpc/compat: 32-bit little endian machine name is ppcle, not ppc powerpc/le: Big endian arguments for ppc_rtas() powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n) powerpc/defconfigs: Enable THP in pseries defconfig powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split powerpc: Rate-limit users spamming kernel log buffer powerpc/perf: Fix handling of L3 events with bank == 1 powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes powerpc/perf: Add kconfig option for hypervisor provided counters powerpc/perf: Add support for the hv 24x7 interface powerpc/perf: Add support for the hv gpci (get performance counter info) interface powerpc/perf: Add macros for defining event fields & formats powerpc/perf: Add a shared interface to get gpci version and capabilities powerpc/perf: Add 24x7 interface headers powerpc/perf: Add hv_gpci interface header powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info) sysfs: create bin_attributes under the requested group powerpc/perf: Enable BHRB access for EBB events powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB ...
2014-04-01Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "This patch consists of the usual driver updates (megaraid_sas, scsi_debug, qla2xxx, qla4xxx, lpfc, bnx2fc, be2iscsi, hpsa, ipr) plus an assortment of minor fixes and the first precursors of SCSI-MQ (the code path simplifications) and the bug fix for the USB oops on remove (which involves an infrastructure change, so is sent via the main tree with a delayed backport after a cycle in which it is shown to introduce no new bugs)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (196 commits) [SCSI] sd: Quiesce mode sense error messages [SCSI] add support for per-host cmd pools [SCSI] simplify command allocation and freeing a bit [SCSI] megaraid: simplify internal command handling [SCSI] ses: Use vpd information from scsi_device [SCSI] Add EVPD page 0x83 and 0x80 to sysfs [SCSI] Return VPD page length in scsi_vpd_inquiry() [SCSI] scsi_sysfs: Implement 'is_visible' callback [SCSI] hpsa: update driver version to 3.4.4-1 [SCSI] hpsa: fix bad endif placement in RAID 5 mapper code [SCSI] qla2xxx: Fix build errors related to invalid print fields on some architectures. [SCSI] bfa: Replace large udelay() with mdelay() [SCSI] vmw_pvscsi: Some improvements in pvscsi driver. [SCSI] vmw_pvscsi: Add support for I/O requests coalescing. [SCSI] vmw_pvscsi: Fix pvscsi_abort() function. [SCSI] remove deprecated IRQF_DISABLED from SCSI [SCSI] bfa: Updating Maintainers email ids [SCSI] ipr: Add new CCIN definition for Grand Canyon support [SCSI] ipr: Format HCAM overlay ID 0x21 [SCSI] ipr: Use pci_enable_msi_range() and pci_enable_msix_range() ...
2014-03-31net: sysfs: add Documentation entries for basic set of attributesFlorian Fainelli
Add sysfs attributes Documentation entries for the basic set of attributes that are exposed by a network device in /sys/class/net/<iface>/ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-31Use 'E' instead of 'X' for unsigned module taint flag.Rusty Russell
Takashi Iwai <tiwai@suse.de> says: > The letter 'X' has been already used for SUSE kernels for very long > time, to indicate the external supported modules. Can the new flag be > changed to another letter for avoiding conflict...? > (BTW, we also use 'N' for "no support", too.) Note: this code should be cleaned up, so we don't have such maps in three places! Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-03-24powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributesCody P Schafer
gpci and 24x7 expose some device specific attributes. Add some documentation for them. Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-24powerpc/perf: Make some new raw event codes available in sysfsAnshuman Khandual
This patchset adds some missing event list for POWER7 PMU raw events which are exported through sysfs interface. Also updates the ABI documentation to add all the sysfs exported raw events. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-22batman-adv: Modified forwarding behaviour for multicast packetsLinus Lüssing
With this patch a multicast packet is not always simply flooded anymore, the behaviour for the following cases is changed to reduce unnecessary overhead: If all nodes within the horizon of a certain node have signalized multicast listener announcement capability then an IPv6 multicast packet with a destination of IPv6 link-local scope (excluding ff02::1) coming from the upstream of this node... * ...is dropped if there is no according multicast listener in the translation table, * ...is forwarded via unicast if there is a single node with interested multicast listeners * ...and otherwise still gets flooded. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-03-21ptp: expose the programmable pins via sysfsRichard Cochran
This patch adds the sysfs hooks needed in order to get and set the programmable pin settings. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20f2fs: add missing documentation for dir_levelJaegeuk Kim
This patch adds missing dir_level documentation. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-20f2fs: throttle the memory footprint with a sysfs entryJaegeuk Kim
This patch introduces ram_thresh, a sysfs entry, which controls the memory footprint used by the free nid list and the nat cache. Previously, the free nid list was controlled by MAX_FREE_NIDS, while the nat cache was managed by NM_WOUT_THRESHOLD. However, this approach cannot be applied dynamically according to the system. So, this patch adds ram_thresh that users can specify the threshold, which is in order of 1 / 1024. For example, if the total ram size is 4GB and the value is set to 10 by default, f2fs tries to control the number of free nids and nat caches not to consume over 10 * (4GB / 1024) = 10MB. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-03-20Merge branches 'pm-runtime' and 'pm-sleep'Rafael J. Wysocki
* pm-runtime: PM / Runtime: Update runtime_idle() documentation for return value meaning * pm-sleep: PM / sleep: Correct whitespace errors in <linux/pm.h> PM: Add missing "freeze" state PM / Hibernate: Spelling s/anonymouns/anonymous/ PM / Runtime: Add missing "it" in comment PM / suspend: Remove unnecessary !! PCI / PM: Resume runtime-suspended devices later during system suspend ACPI / PM: Resume runtime-suspended devices later during system suspend PM / sleep: Set pm_generic functions to NULL for !CONFIG_PM_SLEEP PM: fix typo in comment PM / hibernate: use name_to_dev_t to parse resume PM / wakeup: Include appropriate header file in kernel/power/wakelock.c PM / sleep: Move prototype declaration to header file kernel/power/power.h PM / sleep: Asynchronous threads for suspend_late PM / sleep: Asynchronous threads for suspend_noirq PM / sleep: Asynchronous threads for resume_early PM / sleep: Asynchronous threads for resume_noirq PM / sleep: Two flags for async suspend_noirq and suspend_late
2014-03-16iio: documentation: Add ABI documentation for *_mean_rawSebastian Reichel
Add ABI documentation for in_*_mean_raw files, which are already supported and used in the kernel for some time. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-16iio: Add AS3935 lightning sensor supportMatt Ranostay
AS3935 chipset can detect lightning strikes and reports those back as events and the estimated distance to the storm. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-15[SCSI] hpsa: allow user to disable accelerated i/o pathScott Teel
Allow SSD Smart Path for a controller to be disabled by the user, regardless of settings in controller firmware or array configuration. To disable: echo 0 > /sys/class/scsi_host/host<id>/acciopath_status To re-enable: echo 1 > /sys/class/scsi_host/host<id>/acciopath_status To check state: cat /sys/class/scsi_host/host<id>/acciopath_status Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-13Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULEMathieu Desnoyers
Users have reported being unable to trace non-signed modules loaded within a kernel supporting module signature. This is caused by tracepoint.c:tracepoint_module_coming() refusing to take into account tracepoints sitting within force-loaded modules (TAINT_FORCED_MODULE). The reason for this check, in the first place, is that a force-loaded module may have a struct module incompatible with the layout expected by the kernel, and can thus cause a kernel crash upon forced load of that module on a kernel with CONFIG_TRACEPOINTS=y. Tracepoints, however, specifically accept TAINT_OOT_MODULE and TAINT_CRAP, since those modules do not lead to the "very likely system crash" issue cited above for force-loaded modules. With kernels having CONFIG_MODULE_SIG=y (signed modules), a non-signed module is tainted re-using the TAINT_FORCED_MODULE taint flag. Unfortunately, this means that Tracepoints treat that module as a force-loaded module, and thus silently refuse to consider any tracepoint within this module. Since an unsigned module does not fit within the "very likely system crash" category of tainting, add a new TAINT_UNSIGNED_MODULE taint flag to specifically address this taint behavior, and accept those modules within Tracepoints. We use the letter 'X' as a taint flag character for a module being loaded that doesn't know how to sign its name (proposed by Steven Rostedt). Also add the missing 'O' entry to trace event show_module_flags() list for the sake of completeness. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> NAKed-by: Ingo Molnar <mingo@redhat.com> CC: Thomas Gleixner <tglx@linutronix.de> CC: David Howells <dhowells@redhat.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-03-12PM: Add missing "freeze" stateGeert Uytterhoeven
Fix descriptions of /sys/power/state in the documentation and in a code comment. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Pavel Machek <pavel@ucw.cz> [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-11of: Make device nodes kobjects so they show up in sysfsGrant Likely
Device tree nodes are already treated as objects, and we already want to expose them to userspace which is done using the /proc filesystem today. Right now the kernel has to do a lot of work to keep the /proc view in sync with the in-kernel representation. If device_nodes are switched to be kobjects then the device tree code can be a whole lot simpler. It also turns out that switching to using /sysfs from /proc results in smaller code and data size, and the userspace ABI won't change if /proc/device-tree symlinks to /sys/firmware/devicetree/base. v7: Add missing sysfs_bin_attr_init() v6: Add __of_add_property() early init fixes from Pantelis v5: Rename firmware/ofw to firmware/devicetree Fix updating property values in sysfs v4: Fixed build error on Powerpc Fixed handling of dynamic nodes on powerpc v3: Fixed handling of duplicate attribute and child node names v2: switch to using sysfs bin_attributes which solve the problem of reporting incorrect property size. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David S. Miller <davem@davemloft.net> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-03-11[media] rc: add wakeup_protocols sysfs fileJames Hogan
Add a wakeup_protocols sysfs file which controls the new rc_dev::enabled_protocols[RC_FILTER_WAKEUP], which is the mask of protocols that are used for the wakeup filter. A new RC driver callback change_wakeup_protocol() is called to change the wakeup protocol mask. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Antti Seppälä <a.seppala@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-07powerpc/powernv Platform dump interfaceStewart Smith
This enables support for userspace to fetch and initiate FSP and Platform dumps from the service processor (via firmware) through sysfs. Based on original patch from Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Flow: - We register for OPAL notification events. - OPAL sends new dump available notification. - We make information on dump available via sysfs - Userspace requests dump contents - We retrieve the dump via OPAL interface - User copies the dump data - userspace sends ack for dump - We send ACK to OPAL. sysfs files: - We add the /sys/firmware/opal/dump directory - echoing 1 (well, anything, but in future we may support different dump types) to /sys/firmware/opal/dump/initiate_dump will initiate a dump. - Each dump that we've been notified of gets a directory in /sys/firmware/opal/dump/ with a name of the dump type and ID (in hex, as this is what's used elsewhere to identify the dump). - Each dump has files: id, type, dump and acknowledge dump is binary and is the dump itself. echoing 'ack' to acknowledge (currently any string will do) will acknowledge the dump and it will soon after disappear from sysfs. OPAL APIs: - opal_dump_init() - opal_dump_info() - opal_dump_read() - opal_dump_ack() - opal_dump_resend_notification() Currently we are only ever notified for one dump at a time (until the user explicitly acks the current dump, then we get a notification of the next dump), but this kernel code should "just work" when OPAL starts notifying us of all the dumps present. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-07powerpc/powernv: Read OPAL error log and export it through sysfsStewart Smith
Based on a patch by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> This patch adds support to read error logs from OPAL and export them to userspace through a sysfs interface. We export each log entry as a directory in /sys/firmware/opal/elog/ Currently, OPAL will buffer up to 128 error log records, we don't need to have any knowledge of this limit on the Linux side as that is actually largely transparent to us. Each error log entry has the following files: id, type, acknowledge, raw. Currently we just export the raw binary error log in the 'raw' attribute. In a future patch, we may parse more of the error log to make it a bit easier for userspace (e.g. to be able to display a brief summary in petitboot without having to have a full parser). If we have >128 logs from OPAL, we'll only be notified of 128 until userspace starts acknowledging them. This limitation may be lifted in the future and with this patch, that should "just work" from the linux side. A userspace daemon should: - wait for error log entries using normal mechanisms (we announce creation) - read error log entry - save error log entry safely to disk - acknowledge the error log entry - rinse, repeat. On the Linux side, we read the error log when we're notified of it. This possibly isn't ideal as it would be better to only read them on-demand. However, this doesn't really work with current OPAL interface, so we read the error log immediately when notified at the moment. I've tested this pretty extensively and am rather confident that the linux side of things works rather well. There is currently an issue with the service processor side of things for >128 error logs though. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-22Revert "tty: Set correct tty name in 'active' sysfs attribute"Greg Kroah-Hartman
This reverts commit d8a5dc3033af2fd6d16030d2ee4fbd073460fe54. This breaks plymouth installs, either because plymouth is using the file "incorrectly" or because the patch is incorrect. Either way, this needs to be reverted until it is all figured out. Reported-by: Josh Boyer <jwboyer@fedoraproject.org> Reported-by: Ray Strode <halfline@gmail.com> Cc: Lennart Poettering <lennart@poettering.net> Cc: Kay Sievers <kay@vrfy.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Werner Fink <werner@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/bonding/bond_3ad.h drivers/net/bonding/bond_main.c Two minor conflicts in bonding, both of which were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12net: phy: expose phydev->has_fixups to sysfsFlorian Fainelli
Expose the PHY device has_fixups boolean as a sysfs property to help troubleshooting PHY configurations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12net: phy: expose PHY device interface modeFlorian Fainelli
Expose the PHY device interface mode through sysfs since this is an useful piece of information for knowing how the attached networking device will have configured its transmit/receive path. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-11PM / QoS: Introcuce latency tolerance device PM QoS typeRafael J. Wysocki
Add a new latency tolerance device PM QoS type to be use for specifying active state (RPM_ACTIVE) memory access (DMA) latency tolerance requirements for devices. It may be used to prevent hardware from choosing overly aggressive energy-saving operation modes (causing too much latency to appear) for the whole platform. This feature reqiures hardware support, so it only will be available for devices having a new .set_latency_tolerance() callback in struct dev_pm_info populated, in which case the routine pointed to by it should implement whatever is necessary to transfer the effective requirement value to the hardware. Whenever the effective latency tolerance changes for the device, its .set_latency_tolerance() callback will be executed and the effective value will be passed to it. If that value is negative, which means that the list of latency tolerance requirements for the device is empty, the callback is expected to switch the underlying hardware latency tolerance control mechanism to an autonomous mode if available. If that value is PM_QOS_LATENCY_ANY, in turn, and the hardware supports a special "no requirement" setting, the callback is expected to use it. That allows software to prevent the hardware from automatically updating the device's latency tolerance in response to its power state changes (e.g. during transitions from D3cold to D0), which generally may be done in the autonomous latency tolerance control mode. If .set_latency_tolerance() is present for the device, a new pm_qos_latency_tolerance_us attribute will be present in the devivce's power directory in sysfs. Then, user space can use that attribute to specify its latency tolerance requirement for the device, if any. Writing "any" to it means "no requirement, but do not let the hardware control latency tolerance" and writing "auto" to it allows the hardware to be switched to the autonomous mode if there are no other requirements from the kernel side in the device's list. This changeset includes a fix from Mika Westerberg. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-07tty: Set correct tty name in 'active' sysfs attributeHannes Reinecke
The 'active' sysfs attribute should refer to the currently active tty devices the console is running on, not the currently active console. The console structure doesn't refer to any device in sysfs, only the tty the console is running on has. So we need to print out the tty names in 'active', not the console names. This resolves an issue on s390 platforms in determining the correct console device to use. Cc: Lennart Poettering <lennart@poettering.net> Cc: Kay Sievers <kay@vrfy.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Werner Fink <werner@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06[media] media: rc: add sysfs scancode filtering interfaceJames Hogan
Add and document a generic sysfs based scancode filtering interface for making use of IR data matching hardware to filter out uninteresting scancodes. Two filters exist, one for normal operation and one for filtering scancodes which are permitted to wake the system from suspend. The following files are added to /sys/class/rc/rc?/: - filter: normal scancode filter value - filter_mask: normal scancode filter mask - wakeup_filter: wakeup scancode filter value - wakeup_filter_mask: wakeup scancode filter mask A new s_filter() driver callback is added which must arrange for the specified filter to be applied at the right time. Drivers can convert the scancode filter into a raw IR data filter, which can be applied immediately or later (for wake up filters). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: linux-media@vger.kernel.org Cc: Rob Landley <rob@landley.net> Cc: linux-doc@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] media: rc: document rc class sysfs APIJames Hogan
Briefly document /sys/class/rc/ API for remote controller devices in Documentation/ABI/teting. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-29Documentation: fix multiple typo occurences s/KenelVersion/KernelVersion/Ard Biesheuvel
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Greg KH <greg@kroah.com> Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull ceph updates from Sage Weil: "This is a big batch. From Ilya we have: - rbd support for more than ~250 mapped devices (now uses same scheme that SCSI does for device major/minor numbering) - crush updates for new mapping behaviors (will be needed for coming erasure coding support, among other things) - preliminary support for tiered storage pools There is also a big series fixing a pile cephfs bugs with clustered MDSs from Yan Zheng, ACL support for cephfs from Guangliang Zhao, ceph fscache improvements from Li Wang, improved behavior when we get ENOSPC from Josh Durgin, some readv/writev improvements from Majianpeng, and the usual mix of small cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (76 commits) ceph: cast PAGE_SIZE to size_t in ceph_sync_write() ceph: fix dout() compile warnings in ceph_filemap_fault() libceph: support CEPH_FEATURE_OSD_CACHEPOOL feature libceph: follow redirect replies from osds libceph: rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid} libceph: follow {read,write}_tier fields on osd request submission libceph: add ceph_pg_pool_by_id() libceph: CEPH_OSD_FLAG_* enum update libceph: replace ceph_calc_ceph_pg() with ceph_oloc_oid_to_pg() libceph: introduce and start using oid abstraction libceph: rename MAX_OBJ_NAME_SIZE to CEPH_MAX_OID_NAME_LEN libceph: move ceph_file_layout helpers to ceph_fs.h libceph: start using oloc abstraction libceph: dout() is missing a newline libceph: add ceph_kv{malloc,free}() and switch to them libceph: support CEPH_FEATURE_EXPORT_PEER ceph: add imported caps when handling cap export message ceph: add open export target session helper ceph: remove exported caps when handling cap import message ceph: handle session flush message ...
2014-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...
2014-01-24Merge tag 'pm+acpi-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "As far as the number of commits goes, the top spot belongs to ACPI this time with cpufreq in the second position and a handful of PM core, PNP and cpuidle updates. They are fixes and cleanups mostly, as usual, with a couple of new features in the mix. The most visible change is probably that we will create struct acpi_device objects (visible in sysfs) for all devices represented in the ACPI tables regardless of their status and there will be a new sysfs attribute under those objects allowing user space to check that status via _STA. Consequently, ACPI device eject or generally hot-removal will not delete those objects, unless the table containing the corresponding namespace nodes is unloaded, which is extremely rare. Also ACPI container hotplug will be handled quite a bit differently and cpufreq will support CPU boost ("turbo") generically and not only in the acpi-cpufreq driver. Specifics: - ACPI core changes to make it create a struct acpi_device object for every device represented in the ACPI tables during all namespace scans regardless of the current status of that device. In accordance with this, ACPI hotplug operations will not delete those objects, unless the underlying ACPI tables go away. - On top of the above, new sysfs attribute for ACPI device objects allowing user space to check device status by triggering the execution of _STA for its ACPI object. From Srinivas Pandruvada. - ACPI core hotplug changes reducing code duplication, integrating the PCI root hotplug with the core and reworking container hotplug. - ACPI core simplifications making it use ACPI_COMPANION() in the code "glueing" ACPI device objects to "physical" devices. - ACPICA update to upstream version 20131218. This adds support for the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug facilities. From Bob Moore, Lv Zheng and Betty Dall. - Init code change to carry out the early ACPI initialization earlier. That should allow us to use ACPI during the timekeeping initialization and possibly to simplify the EFI initialization too. From Chun-Yi Lee. - Clenups of the inclusions of ACPI headers in many places all over from Lv Zheng and Rashika Kheria (work in progress). - New helper for ACPI _DSM execution and rework of the code in drivers that uses _DSM to execute it via the new helper. From Jiang Liu. - New Win8 OSI blacklist entries from Takashi Iwai. - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria, Tang Chen, Zhang Rui. - intel_pstate driver updates, including proper Baytrail support, from Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra. - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski. - powernow-k6 cpufreq driver fixes from Mikulas Patocka. - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown. - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar. - cpuidle cleanups from Bartlomiej Zolnierkiewicz. - Support for hibernation APM events from Bin Shi. - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled during thaw transitions from Bjørn Mork. - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson. - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa, Rashika Kheria. - New tool for profiling system suspend from Todd E Brandt and a cpupower tool cleanup from One Thousand Gnomes" * tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits) thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412) cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ Documentation: cpufreq / boost: Update BOOST documentation cpufreq: exynos: Extend Exynos cpufreq driver to support boost cpufreq / boost: Kconfig: Support for software-managed BOOST acpi-cpufreq: Adjust the code to use the common boost attribute cpufreq: Add boost frequency support in core intel_pstate: Add trace point to report internal state. cpufreq: introduce cpufreq_generic_get() routine ARM: SA1100: Create dummy clk_get_rate() to avoid build failures cpufreq: stats: create sysfs entries when cpufreq_stats is a module cpufreq: stats: free table and remove sysfs entry in a single routine cpufreq: stats: remove hotplug notifiers cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly cpufreq: speedstep: remove unused speedstep_get_state platform: introduce OF style 'modalias' support for platform bus PM / tools: new tool for suspend/resume performance optimization ACPI: fix module autoloading for ACPI enumerated devices ACPI: add module autoloading support for ACPI enumerated devices ACPI: fix create_modalias() return value handling ...
2014-01-23kdump: add /sys/kernel/vmcoreinfo ABI documentationVivek Goyal
/sys/kernel/vmcoreinfo was introduced long back but there is no ABI documentation. This patch adds the documentation. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp> Cc: Dan Aloni <da-x@monatomic.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23Merge tag 'for-f2fs-3.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, a couple of sysfs entries were introduced to tune the f2fs at runtime. In addition, f2fs starts to support inline_data and improves the read/write performance in some workloads by refactoring bio-related flows. This patch-set includes the following major enhancement patches. - support inline_data - refactor bio operations such as merge operations and rw type assignment - enhance the direct IO path - enhance bio operations - truncate a node page when it becomes obsolete - add sysfs entries: small_discards, max_victim_search, and in-place-update - add a sysfs entry to control max_victim_search The other bug fixes are as follows. - fix a bug in truncate_partial_nodes - avoid warnings during sparse and build process - fix error handling flows - fix potential bit overflows And, there are a bunch of cleanups" * tag 'for-f2fs-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (95 commits) f2fs: drop obsolete node page when it is truncated f2fs: introduce NODE_MAPPING for code consistency f2fs: remove the orphan block page array f2fs: add help function META_MAPPING f2fs: move a branch for code redability f2fs: call mark_inode_dirty to flush dirty pages f2fs: clean checkpatch warnings f2fs: missing REQ_META and REQ_PRIO when sync_meta_pages(META_FLUSH) f2fs: avoid f2fs_balance_fs call during pageout f2fs: add delimiter to seperate name and value in debug phrase f2fs: use spinlock rather than mutex for better speed f2fs: move alloc new orphan node out of lock protection region f2fs: move grabing orphan pages out of protection region f2fs: remove the needless parameter of f2fs_wait_on_page_writeback f2fs: update documents and a MAINTAINERS entry f2fs: add a sysfs entry to control max_victim_search f2fs: improve write performance under frequent fsync calls f2fs: avoid to read inline data except first page f2fs: avoid to left uninitialized data in page when read inline data f2fs: fix truncate_partial_nodes bug ...
2014-01-22Merge tag 'pci-v3.14-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v3.14 merge window: Resource management - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas) - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu) - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas) - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas) - Enforce bus address limits in resource allocation (Yinghai Lu) - Allocate 64-bit BARs above 4G when possible (Yinghai Lu) - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu) PCI device hotplug - Major rescan/remove locking update (Rafael J. Wysocki) - Make ioapic builtin only (not modular) (Yinghai Lu) - Fix release/free issues (Yinghai Lu) - Clean up pciehp (Bjorn Helgaas) - Announce pciehp slot info during enumeration (Bjorn Helgaas) MSI - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev) - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev) - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev) - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman) - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong) SR-IOV - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao) Virtualization - Add support for save/restore of extended capabilities (Alex Williamson) - Add Virtual Channel to save/restore support (Alex Williamson) - Never treat a VF as a multifunction device (Alex Williamson) - Add pci_try_reset_function(), et al (Alex Williamson) AER - Ignore non-PCIe error sources (Betty Dall) - Support ACPI HEST error sources for domains other than 0 (Betty Dall) - Consolidate HEST error source parsers (Bjorn Helgaas) - Add a TLP header print helper (Borislav Petkov) Freescale i.MX6 - Remove unnecessary code (Fabio Estevam) - Make reset-gpio optional (Marek Vasut) - Report "link up" only after link training completes (Marek Vasut) - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut) - Fix PCIe startup code (Richard Zhu) Marvell MVEBU - Remove duplicate of_clk_get_by_name() call (Andrew Lunn) - Drop writes to bridge Secondary Status register (Jason Gunthorpe) - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe) - Support a bridge with no IO port window (Jason Gunthorpe) - Use max_t() instead of max(resource_size_t,) (Jingoo Han) - Remove redundant of_match_ptr (Sachin Kamat) - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni) NVIDIA Tegra - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower) Renesas R-Car - Add runtime PM support (Valentine Barshak) - Fix rcar_pci_probe() return value check (Wei Yongjun) Synopsys DesignWare - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen) - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen) - Fix missing MSI IRQs (Harro Haan) - Add dw_pcie prefix before cfg_read/write (Pratyush Anand) - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand) - Whitespace cleanup (Jingoo Han) EISA - Call put_device() if device_register() fails (Levente Kurusa) - Revert EISA initialization breakage ((Bjorn Helgaas) Miscellaneous - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger) - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas) - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas) - Use dev_is_pci() to identify PCI devices (Yijing Wang) - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches) - Update documentation 00-INDEX (Erik Ekman)" * tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits) Revert "EISA: Initialize device before its resources" Revert "EISA: Log device resources in dmesg" vfio-pci: Use pci "try" reset interface PCI: Check parent kobject in pci_destroy_dev() xen/pcifront: Use global PCI rescan-remove locking powerpc/eeh: Use global PCI rescan-remove locking PCI: Fix pci_check_and_unmask_intx() comment typos PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus() MPT / PCI: Use pci_stop_and_remove_bus_device_locked() platform / x86: Use global PCI rescan-remove locking PCI: hotplug: Use global PCI rescan-remove locking pcmcia: Use global PCI rescan-remove locking ACPI / hotplug / PCI: Use global PCI rescan-remove locking ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug PCI: Add global pci_lock_rescan_remove() PCI: Cleanup pci.h whitespace PCI: Reorder so actual code comes before stubs PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0 ACPICA: Add helper macros to extract bus/segment numbers from HEST table. PCI: Make local functions static ...
2014-01-20Merge tag 'usb-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big USB pull request for 3.14-rc1 Lots of little things all over the place, and the usual USB gadget updates, and XHCI fixes (some for an issue reported by a lot of people). USB PHY updates as well as chipidea updates and fixes. All of these have been in the linux-next tree with no reported issues" * tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits) usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX usb: chipidea: need to mask INT_STATUS when write otgsc usb: chipidea: put hw_phymode_configure before ci_usb_phy_init usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28 usb: chipidea: add freescale imx28 special write register method usb: ehci: add freescale imx28 special write register method usb: core: check for valid id_table when using the RefId feature usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set usb: core: bail out if user gives an unknown RefId when using new_id usb: core: allow a reference device for new_id usb: core: add sanity checks when using bInterfaceClass with new_id USB: image: correct spelling mistake in comment USB: c67x00: correct spelling mistakes in comments usb: delete non-required instances of include <linux/init.h> usb:hub set hub->change_bits when over-current happens Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28" xhci: Set scatter-gather limit to avoid failed block writes. xhci: Avoid infinite loop when sg urb requires too many trbs usb: gadget: remove unused variable in gr_queue_int() ...
2014-01-20Merge tag 'staging-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver tree changes from Greg KH: "Here's the big drivers/staging/ update for 3.14-rc1 Lots and lots of cleanups, IIO driver updates are also mixed in here due to the subsystem still crossing staging and drivers/iio/, and the dwc2 driver is moved out of staging. There's a new driver (rts5208), which ends up making us adding more lines than removing, but overall there was lots of work toward moving code out of here, which was good All of this has been in linux-next with no reported issues" * tag 'staging-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1084 commits) lustre: delete linux/lustre_debug.h staging: lustre: remove some unused debug macros usb: dwc2: move device tree bindings doc to correct place staging: vt6656: sparse fixes: iwctl_giwgenie use memcpy. staging: vt6656: sparse fixes: iwctl_siwgenie use memcpy. staging: vt6656: sparse fixes ethtool_ioctl Use struct ifreq * staging: vt6656: sparse fixes: dpc.c missing dpc.h staging: lustre: libcfs_debug: small whitespace cleanups staging: lustre: libcfs_debug.h: remove extra blank lines staging: lustre: libcfs_debug.h: Align backslashes in macros staging: lustre: libcfs_debug.h: align define values staging: tidspbridge: adjust error return code (bugfix) Staging: rts5139: rts51x_card: fixed style issues staging: wlags49_h2: Fix "do not use C99 //" in wl_cs.h, wl_enc.h wl_main.h and wl_wext.h Staging: rtl8188eu: Fixed "foo * bar" related coding style issues Staging: rtl8188eu: Fixed required spaces after ',' and around '=' and '==' staging: vt6655: Fix memory leak in wpa_ioctl() imx-drm: parallel-display: honor 'native-mode' property when selecting video mode from DT staging: drm/imx: don't drop crtc offsets when doing pageflip staging: drm/imx: handle framebuffer offsets correctly ...
2014-01-20Merge tag 'char-misc-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver patches from Greg KH: "Here's the big char/misc driver patches for 3.14-rc1. Lots of little things, and a new "big" driver, genwqe. Full details are in the shortlog" * tag 'char-misc-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) mei: limit the number of consecutive resets mei: revamp mei reset state machine drivers/char: don't use module_init in non-modular ttyprintk.c VMCI: fix error handling path when registering guest driver extcon: gpio: Add power resume support Documentation: HOWTO: Updates on subsystem trees, patchwork, -next (vs. -mm) in ko_KR Documentation: HOWTO: update for 2.6.x -> 3.x versioning in ko_KR Documentation: HOWTO: update stable address in ko_KR Documentation: HOWTO: update LXR web link in ko_KR char: nwbutton: open-code interruptible_sleep_on mei: fix syntax in comments and debug output mei: nfc: mei_nfc_free has to be called under lock mei: use hbm idle state to prevent spurious resets mei: do not run reset flow from the interrupt thread misc: genwqe: fix return value check in genwqe_device_create() GenWQE: Fix warnings for sparc GenWQE: Fix compile problems for Alpha Documentation/misc-devices/mei/mei-amt-version.c: remove unneeded call of mei_deinit() GenWQE: Rework return code for flash-update ioctl sgi-xp: open-code interruptible_sleep_on_timeout ...
2014-01-10usb: core: allow a reference device for new_idWolfram Sang
Often, usb drivers need some driver_info to get a device to work. To have access to driver_info when using new_id, allow to pass a reference vendor:product tuple from which new_id will inherit driver_info. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09f2fs: update documents and a MAINTAINERS entryJaegeuk Kim
This patch adds missing some description of sysfs entries in - Documentation/ABI/testing/sysfs-fs-f2fs - Documentation/filesystems/f2fs.txt. And it adds a maintained document entry of F2FS in MAINTAINERS. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-01-08batman-adv: add isolation_mark sysfs attributeAntonio Quartulli
This attribute can be used to set and read the value and the mask of the skb mark which will be used to classify the source non-mesh client as ISOLATED. In this way a client can be advertised as such and the mark can potentially be restored at the receiving node before delivering the skb. This can be helpful for creating network wide netfilter policies. This sysfs file expects a string of the shape "$mark/$mask". Where $mark has to be a 32-bit number in any base, while $mask must be a 32bit mask expressed in hex base. Only bits in $mark covered by the bitmask are really stored. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-06Documentation: add ABI entry for intel_pstateRamkumar Ramachandra
Add a Documentation/ABI entry for /sys/devices/system/cpu/intel_pstate/max_perf_pct, /sys/devices/system/cpu/intel_pstate/min_perf_pct, and /sys/devices/system/cpu/intel_pstate/no_turbo. Cc: Dirk Brandewie <dirk.brandewie@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-31rbd: add support for single-major device number allocation schemeIlya Dryomov
Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-31rbd: add 'minor' sysfs rbd device attributeIlya Dryomov
Introduce /sys/bus/rbd/devices/<id>/minor sysfs attribute for exporting rbd whole disk minor numbers. This is a step towards single-major device number allocation scheme, but also a good thing on its own. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-29x86: Export x86 boot_params to sysfsDave Young
kexec-tools use boot_params for getting the 1st kernel hardware_subarch, the kexec kernel EFI runtime support also needs to read the old efi_info from boot_params. Currently it exists in debugfs which is not a good place for such infomation. Per HPA, we should avoid "sploit debugfs". In this patch /sys/kernel/boot_params are exported, also the setup_data is exported as a subdirectory. kexec-tools is using debugfs for hardware_subarch for a long time now so we're not removing it yet. Structure is like below: /sys/kernel/boot_params |__ data /* boot_params in binary*/ |__ setup_data | |__ 0 /* the first setup_data node */ | | |__ data /* setup_data node 0 in binary*/ | | |__ type /* setup_data type of setup_data node 0, hex string */ [snip] |__ version /* boot protocal version (in hex, "0x" prefixed)*/ Signed-off-by: Dave Young <dyoung@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-12-21efi: Export EFI runtime memory mapping to sysfsDave Young
kexec kernel will need exactly same mapping for EFI runtime memory ranges. Thus here export the runtime ranges mapping to sysfs, kexec-tools will assemble them and pass to 2nd kernel via setup_data. Introducing a new directory /sys/firmware/efi/runtime-map just like /sys/firmware/memmap. Containing below attribute in each file of that directory: attribute num_pages phys_addr type virt_addr Signed-off-by: Dave Young <dyoung@redhat.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-12-21efi: Export more EFI table variables to sysfsDave Young
Export fw_vendor, runtime and config table physical addresses to /sys/firmware/efi/{fw_vendor,runtime,config_table} because kexec kernels need them. From EFI spec these 3 variables will be updated to virtual address after entering virtual mode. But kernel startup code will need the physical address. Signed-off-by: Dave Young <dyoung@redhat.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-12-19PCI/MSI: Export MSI mode using attributes, not kobjectsGreg Kroah-Hartman
The PCI MSI sysfs code is a mess with kobjects for things that don't really need to be kobjects. This patch creates attributes dynamically for the MSI interrupts instead of using kobjects. Note, this removes a directory from sysfs. Old MSI kobjects: pci_device └── msi_irqs    └── 40    └── mode New MSI attributes: pci_device └── msi_irqs    └── 40 As there was only one file "mode" with the kobject model, the interrupt number is now a file that returns the "mode" of the interrupt (msi vs. msix). Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>