summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2020-10-07fuse: fix the ->direct_IO() treatment of iov_iterAl Viro
[ Upstream commit 933a3752babcf6513117d5773d2b70782d6ad149 ] the callers rely upon having any iov_iter_truncate() done inside ->direct_IO() countered by iov_iter_reexpand(). Reported-by: Qian Cai <cai@redhat.com> Tested-by: Qian Cai <cai@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07nvme-core: get/put ctrl and transport module in nvme_dev_open/release()Chaitanya Kulkarni
[ Upstream commit 52a3974feb1a3eec25d8836d37a508b67b0a9cd0 ] Get and put the reference to the ctrl in the nvme_dev_open() and nvme_dev_release() before and after module get/put for ctrl in char device file operations. Introduce char_dev relase function, get/put the controller and module which allows us to fix the potential Oops which can be easily reproduced with a passthru ctrl (although the problem also exists with pure user access): Entering kdb (current=0xffff8887f8290000, pid 3128) on processor 30 Oops: (null) due to oops @ 0xffffffffa01019ad CPU: 30 PID: 3128 Comm: bash Tainted: G W OE 5.8.0-rc4nvme-5.9+ #35 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.4 RIP: 0010:nvme_free_ctrl+0x234/0x285 [nvme_core] Code: 57 10 a0 e8 73 bf 02 e1 ba 3d 11 00 00 48 c7 c6 98 33 10 a0 48 c7 c7 1d 57 10 a0 e8 5b bf 02 e1 8 RSP: 0018:ffffc90001d63de0 EFLAGS: 00010246 RAX: ffffffffa05c0440 RBX: ffff8888119e45a0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff8888177e9550 RDI: ffff8888119e43b0 RBP: ffff8887d4768000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: ffffc90001d63c90 R12: ffff8888119e43b0 R13: ffff8888119e5108 R14: dead000000000100 R15: ffff8888119e5108 FS: 00007f1ef27b0740(0000) GS:ffff888817600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa05c0470 CR3: 00000007f6bee000 CR4: 00000000003406e0 Call Trace: device_release+0x27/0x80 kobject_put+0x98/0x170 nvmet_passthru_ctrl_disable+0x4a/0x70 [nvmet] nvmet_passthru_enable_store+0x4c/0x90 [nvmet] configfs_write_file+0xe6/0x150 vfs_write+0xba/0x1e0 ksys_write+0x5f/0xe0 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f1ef1eb2840 Code: Bad RIP value. RSP: 002b:00007fffdbff0eb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1ef1eb2840 RDX: 0000000000000002 RSI: 00007f1ef27d2000 RDI: 0000000000000001 RBP: 00007f1ef27d2000 R08: 000000000000000a R09: 00007f1ef27b0740 R10: 0000000000000001 R11: 0000000000000246 R12: 00007f1ef2186400 R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000 With this patch fix we take the module ref count in nvme_dev_open() and release that ref count in newly introduced nvme_dev_release(). Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07nvme-pci: disable the write zeros command for Intel 600P/P3100David Milburn
[ Upstream commit ce4cc3133dc72c31bd49ddcf22d0f9eeff47a761 ] The write zeros command does not work with 4k range. bash-4.4# ./blkdiscard /dev/nvme0n1p2 bash-4.4# strace -efallocate xfs_io -c "fzero 536895488 2048" /dev/nvme0n1p2 fallocate(3, FALLOC_FL_ZERO_RANGE, 536895488, 2048) = 0 +++ exited with 0 +++ bash-4.4# dd bs=1 if=/dev/nvme0n1p2 skip=536895488 count=512 | hexdump -C 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00000200 bash-4.4# ./blkdiscard /dev/nvme0n1p2 bash-4.4# strace -efallocate xfs_io -c "fzero 536895488 4096" /dev/nvme0n1p2 fallocate(3, FALLOC_FL_ZERO_RANGE, 536895488, 4096) = 0 +++ exited with 0 +++ bash-4.4# dd bs=1 if=/dev/nvme0n1p2 skip=536895488 count=512 | hexdump -C 00000000 5c 61 5c b0 96 21 1b 5e 85 0c 07 32 9c 8c eb 3c |\a\..!.^...2...<| 00000010 4a a2 06 ca 67 15 2d 8e 29 8d a8 a0 7e 46 8c 62 |J...g.-.)...~F.b| 00000020 bb 4c 6c c1 6b f5 ae a5 e4 a9 bc 93 4f 60 ff 7a |.Ll.k.......O`.z| Reported-by: Eric Sandeen <esandeen@redhat.com> Signed-off-by: David Milburn <dmilburn@redhat.com> Tested-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07rndis_host: increase sleep time in the query-response loopOlympia Giannou
[ Upstream commit 4202c9fdf03d79dedaa94b2c4cf574f25793d669 ] Some WinCE devices face connectivity issues via the NDIS interface. They fail to register, resulting in -110 timeout errors and failures during the probe procedure. In this kind of WinCE devices, the Windows-side ndis driver needs quite more time to be loaded and configured, so that the linux rndis host queries to them fail to be responded correctly on time. More specifically, when INIT is called on the WinCE side - no other requests can be served by the Client and this results in a failed QUERY afterwards. The increase of the waiting time on the side of the linux rndis host in the command-response loop leaves the INIT process to complete and respond to a QUERY, which comes afterwards. The WinCE devices with this special "feature" in their ndis driver are satisfied by this fix. Signed-off-by: Olympia Giannou <olympia.giannou@leica-geosystems.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07net: dec: de2104x: Increase receive ring size for TulipLucy Yan
[ Upstream commit ee460417d254d941dfea5fb7cff841f589643992 ] Increase Rx ring size to address issue where hardware is reaching the receive work limit. Before: [ 102.223342] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.245695] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.251387] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.267444] de2104x 0000:17:00.0 eth0: rx work limit reached Signed-off-by: Lucy Yan <lucyyan@google.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07hv_netvsc: Cache the current data path to avoid duplicate call and messageDexuan Cui
[ Upstream commit da26658c3d7005aa67a706dceff7b2807b59e123 ] The previous change "hv_netvsc: Switch the data path at the right time during hibernation" adds the call of netvsc_vf_changed() upon NETDEV_CHANGE, so it's necessary to avoid the duplicate call and message when the VF is brought UP or DOWN. Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07drm/sun4i: mixer: Extend regmap max_registerMartin Cerveny
[ Upstream commit 74ea06164cda81dc80e97790164ca533fd7e3087 ] Better guess. Secondary CSC registers are from 0xF0000. Signed-off-by: Martin Cerveny <m.cerveny@computer.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200906162140.5584-3-m.cerveny@computer.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07Revert "wlcore: Adding suppoprt for IGTK key in wlcore driver"Mauro Carvalho Chehab
[ Upstream commit 1264c1e0cfe55e2d6c35e869244093195529af37 ] This patch causes a regression betwen Kernel 5.7 and 5.8 at wlcore: with it applied, WiFi stops working, and the Kernel starts printing this message every second: wlcore: PHY firmware version: Rev 8.2.0.0.242 wlcore: firmware booted (Rev 8.9.0.0.79) wlcore: ERROR command execute failure 14 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 133 at drivers/net/wireless/ti/wlcore/main.c:795 wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore] Modules linked in: wl18xx wlcore mac80211 libarc4 cfg80211 rfkill snd_soc_hdmi_codec crct10dif_ce wlcore_sdio adv7511 cec kirin9xx_drm(C) kirin9xx_dw_drm_dsi(C) drm_kms_helper drm ip_tables x_tables ipv6 nf_defrag_ipv6 CPU: 0 PID: 133 Comm: kworker/0:1 Tainted: G WC 5.8.0+ #186 Hardware name: HiKey970 (DT) Workqueue: events_freezable ieee80211_restart_work [mac80211] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) pc : wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore] lr : wl12xx_queue_recovery_work+0x24/0x30 [wlcore] sp : ffff8000126c3a60 x29: ffff8000126c3a60 x28: 00000000000025de x27: 0000000000000010 x26: 0000000000000005 x25: ffff0001a5d49e80 x24: ffff8000092cf580 x23: ffff0001b7c12623 x22: ffff0001b6fcf2e8 x21: ffff0001b7e46200 x20: 00000000fffffffb x19: ffff0001a78e6400 x18: 0000000000000030 x17: 0000000000000001 x16: 0000000000000001 x15: ffff0001b7e46670 x14: ffffffffffffffff x13: ffff8000926c37d7 x12: ffff8000126c37e0 x11: ffff800011e01000 x10: ffff8000120526d0 x9 : 0000000000000000 x8 : 3431206572756c69 x7 : 6166206574756365 x6 : 0000000000000c2c x5 : 0000000000000000 x4 : ffff0001bf1361e8 x3 : ffff0001bf1790b0 x2 : 0000000000000000 x1 : ffff0001a5d49e80 x0 : 0000000000000001 Call trace: wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore] wl12xx_queue_recovery_work+0x24/0x30 [wlcore] wl1271_cmd_set_sta_key+0x258/0x25c [wlcore] wl1271_set_key+0x7c/0x2dc [wlcore] wlcore_set_key+0xe4/0x360 [wlcore] wl18xx_set_key+0x48/0x1d0 [wl18xx] wlcore_op_set_key+0xa4/0x180 [wlcore] ieee80211_key_enable_hw_accel+0xb0/0x2d0 [mac80211] ieee80211_reenable_keys+0x70/0x110 [mac80211] ieee80211_reconfig+0xa00/0xca0 [mac80211] ieee80211_restart_work+0xc4/0xfc [mac80211] process_one_work+0x1cc/0x350 worker_thread+0x13c/0x470 kthread+0x154/0x160 ret_from_fork+0x10/0x30 ---[ end trace b1f722abf9af5919 ]--- wlcore: WARNING could not set keys wlcore: ERROR Could not add or replace key wlan0: failed to set key (4, ff:ff:ff:ff:ff:ff) to hardware (-5) wlcore: Hardware recovery in progress. FW ver: Rev 8.9.0.0.79 wlcore: pc: 0x0, hint_sts: 0x00000040 count: 39 wlcore: down wlcore: down ieee80211 phy0: Hardware restart was requested mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0) wlcore: PHY firmware version: Rev 8.2.0.0.242 wlcore: firmware booted (Rev 8.9.0.0.79) wlcore: ERROR command execute failure 14 ------------[ cut here ]------------ Tested on Hikey 970. This reverts commit 2b7aadd3b9e17e8b81eeb8d9cc46756ae4658265. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/f0a2cb7ea606f1a284d4c23cbf983da2954ce9b6.1598420968.git.mchehab+huawei@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07drivers/net/wan/hdlc_fr: Add needed_headroom for PVC devicesXie He
[ Upstream commit 44a049c42681de71c783d75cd6e56b4e339488b0 ] PVC devices are virtual devices in this driver stacked on top of the actual HDLC device. They are the devices normal users would use. PVC devices have two types: normal PVC devices and Ethernet-emulating PVC devices. When transmitting data with PVC devices, the ndo_start_xmit function will prepend a header of 4 or 10 bytes. Currently this driver requests this headroom to be reserved for normal PVC devices by setting their hard_header_len to 10. However, this does not work when these devices are used with AF_PACKET/RAW sockets. Also, this driver does not request this headroom for Ethernet-emulating PVC devices (but deals with this problem by reallocating the skb when needed, which is not optimal). This patch replaces hard_header_len with needed_headroom, and set needed_headroom for Ethernet-emulating PVC devices, too. This makes the driver to request headroom for all PVC devices in all cases. Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07libbpf: Remove arch-specific include path in MakefileNaveen N. Rao
[ Upstream commit 21e9ba5373fc2cec608fd68301a1dbfd14df3172 ] Ubuntu mainline builds for ppc64le are failing with the below error (*): CALL /home/kernel/COD/linux/scripts/atomic/check-atomics.sh DESCEND bpf/resolve_btfids Auto-detecting system features: ... libelf: [ [32mon[m ] ... zlib: [ [32mon[m ] ... bpf: [ [31mOFF[m ] BPF API too old make[6]: *** [Makefile:295: bpfdep] Error 1 make[5]: *** [Makefile:54: /home/kernel/COD/linux/debian/build/build-generic/tools/bpf/resolve_btfids//libbpf.a] Error 2 make[4]: *** [Makefile:71: bpf/resolve_btfids] Error 2 make[3]: *** [/home/kernel/COD/linux/Makefile:1890: tools/bpf/resolve_btfids] Error 2 make[2]: *** [/home/kernel/COD/linux/Makefile:335: __build_one_by_one] Error 2 make[2]: Leaving directory '/home/kernel/COD/linux/debian/build/build-generic' make[1]: *** [Makefile:185: __sub-make] Error 2 make[1]: Leaving directory '/home/kernel/COD/linux' resolve_btfids needs to be build as a host binary and it needs libbpf. However, libbpf Makefile hardcodes an include path utilizing $(ARCH). This results in mixing of cross-architecture headers resulting in a build failure. The specific header include path doesn't seem necessary for a libbpf build. Hence, remove the same. (*) https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.9-rc3/ppc64el/log Reported-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200902084246.1513055-1-naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07mt76: mt7915: use ieee80211_free_txskb to free tx skbsFelix Fietkau
[ Upstream commit b4be5a53ebf478ffcfb4c98c0ccc4a8d922b9a02 ] Using dev_kfree_skb for tx skbs breaks AQL. This worked until now only by accident, because a mac80211 issue breaks AQL on drivers with firmware rate control that report the rate via ieee80211_tx_status_ext as struct rate_info. Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200812144943.91974-1-nbd@nbd.name Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07vboxsf: Fix the check for the old binary mount-arguments structHans de Goede
[ Upstream commit 9d682ea6bcc76b8b2691c79add59f7d99c881635 ] Fix the check for the mainline vboxsf code being used with the old mount.vboxsf mount binary from the out-of-tree vboxsf version doing a comparison between signed and unsigned data types. This fixes the following smatch warnings: fs/vboxsf/super.c:390 vboxsf_parse_monolithic() warn: impossible condition '(options[1] == (255)) => ((-128)-127 == 255)' fs/vboxsf/super.c:391 vboxsf_parse_monolithic() warn: impossible condition '(options[2] == (254)) => ((-128)-127 == 254)' fs/vboxsf/super.c:392 vboxsf_parse_monolithic() warn: impossible condition '(options[3] == (253)) => ((-128)-127 == 253)' Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07clocksource/drivers/timer-gx6605s: Fixup counter reloadGuo Ren
[ Upstream commit bc6717d55d07110d8f3c6d31ec2af50c11b07091 ] When the timer counts to the upper limit, an overflow interrupt is generated, and the count is reset with the value in the TIME_INI register. But the software expects to start counting from 0 when the count overflows, so it forces TIME_INI to 0 to solve the potential interrupt storm problem. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Tested-by: Xu Kai <xukai@nationalchip.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1597735877-71115-1-git-send-email-guoren@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07xen/events: don't use chip_data for legacy IRQsJuergen Gross
commit 0891fb39ba67bd7ae023ea0d367297ffff010781 upstream. Since commit c330fb1ddc0a ("XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.") Xen is using the chip_data pointer for storing IRQ specific data. When running as a HVM domain this can result in problems for legacy IRQs, as those might use chip_data for their own purposes. Use a local array for this purpose in case of legacy IRQs, avoiding the double use. Cc: stable@vger.kernel.org Fixes: c330fb1ddc0a ("XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.") Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Stefan Bader <stefan.bader@canonical.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20200930091614.13660-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07drm/amdgpu: restore proper ref count in amdgpu_display_crtc_set_configJean Delvare
commit a39d0d7bdf8c21ac7645c02e9676b5cb2b804c31 upstream. A recent attempt to fix a ref count leak in amdgpu_display_crtc_set_config() turned out to be doing too much and "fixed" an intended decrease as if it were a leak. Undo that part to restore the proper balance. This is the very nature of this function to increase or decrease the power reference count depending on the situation. Consequences of this bug is that the power reference would eventually get down to 0 while the display was still in use, resulting in that display switching off unexpectedly. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: e008fa6fb415 ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config") Cc: stable@vger.kernel.org Cc: Navid Emamdoost <navid.emamdoost@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07memstick: Skip allocating card when removing hostKai-Heng Feng
commit 62c59a8786e6bb75569cee91dab66e9da3ff4b68 upstream. After commit 6827ca573c03 ("memstick: rtsx_usb_ms: Support runtime power management"), removing module rtsx_usb_ms will be stuck. The deadlock is caused by powering on and powering off at the same time, the former one is when memstick_check() is flushed, and the later is called by memstick_remove_host(). Soe let's skip allocating card to prevent this issue. Fixes: 6827ca573c03 ("memstick: rtsx_usb_ms: Support runtime power management") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200925084952.13220-1-kai.heng.feng@canonical.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07tracing: Fix trace_find_next_entry() accounting of temp buffer sizeSteven Rostedt (VMware)
commit 851e6f61cd076954f9d521e0d79b173ad3a2453b upstream. The temp buffer size variable for trace_find_next_entry() was incorrectly being updated when the size did not change. The temp buffer size should only be updated when it is reallocated. This is mostly an issue when used with ftrace_dump(). That's because ftrace_dump() can not allocate a new buffer, and instead uses a temporary buffer with a fix size. But the variable that keeps track of that size is incorrectly updated with each call, and it could fall into the path that would try to reallocate the buffer and produce a warning. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1601 at kernel/trace/trace.c:3548 trace_find_next_entry+0xd0/0xe0 Modules linked in [..] CPU: 1 PID: 1601 Comm: bash Not tainted 5.9.0-rc5-test+ #521 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:trace_find_next_entry+0xd0/0xe0 Code: 40 21 00 00 4c 89 e1 31 d2 4c 89 ee 48 89 df e8 c6 9e ff ff 89 ab 54 21 00 00 5b 5d 41 5c 41 5d c3 48 63 d5 eb bf 31 c0 eb f0 <0f> 0b 48 63 d5 eb b4 66 0f 1f 84 00 00 00 00 00 53 48 8d 8f 60 21 RSP: 0018:ffff95a4f2e8bd70 EFLAGS: 00010046 RAX: ffffffff96679fc0 RBX: ffffffff97910de0 RCX: ffffffff96679fc0 RDX: ffff95a4f2e8bd98 RSI: ffff95a4ee321098 RDI: ffffffff97913000 RBP: 0000000000000018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000046 R12: ffff95a4f2e8bd98 R13: 0000000000000000 R14: ffff95a4ee321098 R15: 00000000009aa301 FS: 00007f8565484740(0000) GS:ffff95a55aa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055876bd43d90 CR3: 00000000b76e6003 CR4: 00000000001706e0 Call Trace: trace_print_lat_context+0x58/0x2d0 ? cpumask_next+0x16/0x20 print_trace_line+0x1a4/0x4f0 ftrace_dump.cold+0xad/0x12c __handle_sysrq.cold+0x51/0x126 write_sysrq_trigger+0x3f/0x4a proc_reg_write+0x53/0x80 vfs_write+0xca/0x210 ksys_write+0x70/0xf0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f8565579487 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffd40707948 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f8565579487 RDX: 0000000000000002 RSI: 000055876bd74de0 RDI: 0000000000000001 RBP: 000055876bd74de0 R08: 000000000000000a R09: 0000000000000001 R10: 000055876bdec280 R11: 0000000000000246 R12: 0000000000000002 R13: 00007f856564a500 R14: 0000000000000002 R15: 00007f856564a700 irq event stamp: 109958 ---[ end trace 7aab5b7e51484b00 ]--- Not only fix the updating of the temp buffer, but also do not free the temp buffer before a new buffer is allocated (there's no reason to not continue to use the current temp buffer if an allocation fails). Cc: stable@vger.kernel.org Fixes: 8e99cf91b99bb ("tracing: Do not allocate buffer in trace_find_next_entry() in atomic") Reported-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07ftrace: Move RCU is watching check after recursion checkSteven Rostedt (VMware)
commit b40341fad6cc2daa195f8090fd3348f18fff640a upstream. The first thing that the ftrace function callback helper functions should do is to check for recursion. Peter Zijlstra found that when "rcu_is_watching()" had its notrace removed, it caused perf function tracing to crash. This is because the call of rcu_is_watching() is tested before function recursion is checked and and if it is traced, it will cause an infinite recursion loop. rcu_is_watching() should still stay notrace, but to prevent this should never had crashed in the first place. The recursion prevention must be the first thing done in callback functions. Link: https://lore.kernel.org/r/20200929112541.GM2628@hirez.programming.kicks-ass.net Cc: stable@vger.kernel.org Cc: Paul McKenney <paulmck@kernel.org> Fixes: c68c0fa293417 ("ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too") Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07iio: adc: qcom-spmi-adc5: fix driver nameDmitry Baryshkov
commit fdb29f4de1374483291232ae7515e5e7bb464762 upstream. Remove superfluous '.c' from qcom-spmi-adc5 device driver name. Fixes: e13d757279bb ("iio: adc: Add QCOM SPMI PMIC5 ADC driver") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200910140000.324091-2-dmitry.baryshkov@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07Input: i8042 - add nopnp quirk for Acer Aspire 5 A515Jiri Kosina
commit 5fc27b098dafb8e30794a9db0705074c7d766179 upstream. Touchpad on this laptop is not detected properly during boot, as PNP enumerates (wrongly) AUX port as disabled on this machine. Fix that by adding this board (with admittedly quite funny DMI identifiers) to nopnp quirk list. Reported-by: Andrés Barrantes Silman <andresbs2000@protonmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2009252337340.3336@cbobk.fhfr.pm Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07i2c: i801: Exclude device from suspend direct complete optimizationJean Delvare
commit 845b89127bc5458d0152a4d63f165c62a22fcb70 upstream. By default, PCI drivers with runtime PM enabled will skip the calls to suspend and resume on system PM. For this driver, we don't want that, as we need to perform additional steps for system PM to work properly on all systems. So instruct the PM core to not skip these calls. Fixes: a9c8088c7988 ("i2c: i801: Don't restore config registers on runtime PM") Reported-by: Volker Rümelin <volker.ruemelin@googlemail.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()Mark Mielke
commit bcf3a2953d36bbfb9bd44ccb3db0897d935cc485 upstream. The kernel may fail to boot or devices may fail to come up when initializing iscsi_tcp devices starting with Linux 5.8. Commit a79af8a64d39 ("[SCSI] iscsi_tcp: use iscsi_conn_get_addr_param libiscsi function") introduced getpeername() within the session spinlock. Commit 1b66d253610c ("bpf: Add get{peer, sock}name attach types for sock_addr") introduced BPF_CGROUP_RUN_SA_PROG_LOCK() within getpeername(), which acquires a mutex and when used from iscsi_tcp devices can now lead to "BUG: scheduling while atomic:" and subsequent damage. Ensure that the spinlock is released before calling getpeername() or getsockname(). sock_hold() and sock_put() are used to ensure that the socket reference is preserved until after the getpeername() or getsockname() complete. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1877345 Link: https://lkml.org/lkml/2020/7/28/1085 Link: https://lkml.org/lkml/2020/8/31/459 Link: https://lore.kernel.org/r/20200928043329.606781-1-mark.mielke@gmail.com Fixes: a79af8a64d39 ("[SCSI] iscsi_tcp: use iscsi_conn_get_addr_param libiscsi function") Fixes: 1b66d253610c ("bpf: Add get{peer, sock}name attach types for sock_addr") Cc: stable@vger.kernel.org Reported-by: Marc Dionne <marc.c.dionne@gmail.com> Tested-by: Marc Dionne <marc.c.dionne@gmail.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Mark Mielke <mark.mielke@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07clk: socfpga: stratix10: fix the divider for the emac_ptp_free_clkDinh Nguyen
commit b02cf0c4736c65c6667f396efaae6b5521e82abf upstream. The fixed divider the emac_ptp_free_clk should be 2, not 4. Fixes: 07afb8db7340 ("clk: socfpga: stratix10: add clock driver for Stratix10 platform") Cc: stable@vger.kernel.org Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20200831202657.8224-1-dinguyen@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07clk: samsung: Keep top BPLL mux on Exynos542x enabledMarek Szyprowski
commit 0212a0483b0a36cc94cfab882b3edbb41fcfe1cd upstream. BPLL clock must not be disabled because it is needed for proper DRAM operation. This is normally handled by respective memory devfreq driver, but when that driver is not yet probed or its probe has been deferred the clock might get disabled what causes board hang. Fix this by calling clk_prepare_enable() directly from the clock provider driver. Cc: stable@vger.kernel.org Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200807133143.22748-1-m.szyprowski@samsung.com Fixes: 6e7674c3c6df ("memory: Add DMC driver for Exynos5422") Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07gpio: amd-fch: correct logic of GPIO_LINE_DIRECTIONEd Wildgoose
commit d25e8fdebdad84219b498873300b7f11dd915b88 upstream. The original commit appears to have the logic reversed in amd_fch_gpio_get_direction. Also confirmed by observing the value of "direction" in the sys tree. Signed-off-by: Ed Wildgoose <lists@wildgooses.com> Fixes: e09d168f13f0 ("gpio: AMD G-Series PCH gpio driver") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07gpio: tc35894: fix up tc35894 interrupt configurationdillon min
commit 214b0e1ad01abf4c1f6d8d28fa096bf167e47cef upstream. The offset of regmap is incorrect, j * 8 is move to the wrong register. for example: asume i = 0, j = 1. we want to set KPY5 as interrupt falling edge mode, regmap[0][1] should be TC3589x_GPIOIBE1 0xcd but, regmap[i] + j * 8 = TC3589x_GPIOIBE0 + 8 ,point to 0xd4, this is TC3589x_GPIOIE2 not TC3589x_GPIOIBE1. Fixes: d88b25be3584 ("gpio: Add TC35892 GPIO driver") Cc: Cc: stable@vger.kernel.org Signed-off-by: dillon min <dillon.minfei@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07gpio: mockup: fix resource leak in error pathBartosz Golaszewski
commit 1b02d9e770cd7087f34c743f85ccf5ea8372b047 upstream. If the module init function fails after creating the debugs directory, it's never removed. Add proper cleanup calls to avoid this resource leak. Fixes: 9202ba2397d1 ("gpio: mockup: implement event injecting over debugfs") Cc: <stable@vger.kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07gpio: siox: explicitly support only threaded irqsAhmad Fatoum
commit 45ccf6556720293323c20cda717756014ff63007 upstream. The gpio-siox driver uses handle_nested_irq() to implement its interrupt support. This is only capable of handling threaded irq actions. For a hardirq action it triggers a NULL pointer oops. (It calls action->thread_fn which is NULL then.) Prevent registration of a hardirq action by setting gpio_irq_chip::threaded to true. Cc: u.kleine-koenig@pengutronix.de Fixes: be8c8facc707 ("gpio: new driver to work with a 8x12 siox") Cc: stable@vger.kernel.org Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07usbcore/driver: Accommodate usbipM. Vefa Bicakci
commit 3fce39601a1a34d940cf62858ee01ed9dac5d459 upstream. Commit 88b7381a939d ("USB: Select better matching USB drivers when available") inadvertently broke usbip functionality. The commit in question allows USB device drivers to be explicitly matched with USB devices via the use of driver-provided identifier tables and match functions, which is useful for a specialised device driver to be chosen for a device that can also be handled by another, more generic, device driver. Prior, the USB device section of usb_device_match() had an unconditional "return 1" statement, which allowed user-space to bind USB devices to the usbip_host device driver, if desired. However, the aforementioned commit changed the default/fallback return value to zero. This breaks device drivers such as usbip_host, so this commit restores the legacy behaviour, but only if a device driver does not have an id_table and a match() function. In addition, if usb_device_match is called for a device driver and device pair where the device does not match the id_table of the device driver in question, then the device driver will be disqualified for the device. This allows avoiding the default case of "return 1", which prevents undesirable probe() calls to a driver even though its id_table did not match the device. Finally, this commit changes the specialised-driver-to-generic-driver transition code so that when a device driver returns -ENODEV, a more generic device driver is only considered if the current device driver does not have an id_table and a match() function. This ensures that "generic" drivers such as usbip_host will not be considered specialised device drivers and will not cause the device to be locked in to the generic device driver, when a more specialised device driver could be tried. All of these changes restore usbip functionality without regressions, ensure that the specialised/generic device driver selection logic works as expected with the usb and apple-mfi-fastcharge drivers, and do not negatively affect the use of devices provided by dummy_hcd. Fixes: 88b7381a939d ("USB: Select better matching USB drivers when available") Cc: <stable@vger.kernel.org> # 5.8 Cc: Bastien Nocera <hadess@hadess.net> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: <syzkaller@googlegroups.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Link: https://lore.kernel.org/r/20200922110703.720960-5-m.v.b@runbox.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07usbcore/driver: Fix incorrect downcastM. Vefa Bicakci
commit 4df30e7603432704380b12fe40a604ee7f66746d upstream. This commit resolves a minor bug in the selection/discovery of more specific USB device drivers for devices that are currently bound to generic USB device drivers. The bug is related to the way a candidate USB device driver is compared against the generic USB device driver. The code in is_dev_usb_generic_driver() assumes that the device driver in question is a USB device driver by calling to_usb_device_driver(dev->driver) to downcast; however I have observed that this assumption is not always true, through code instrumentation. This commit avoids the incorrect downcast altogether by comparing the USB device's driver (i.e., dev->driver) to the generic USB device driver directly. This method was suggested by Alan Stern. This bug was found while investigating Andrey Konovalov's report indicating usbip device driver misbehaviour with the recently merged generic USB device driver selection feature. The report is linked below. Fixes: d5643d2249b2 ("USB: Fix device driver race") Cc: <stable@vger.kernel.org> # 5.8 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Bastien Nocera <hadess@hadess.net> Cc: Shuah Khan <shuah@kernel.org> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: <syzkaller@googlegroups.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Link: https://lore.kernel.org/r/20200922110703.720960-4-m.v.b@runbox.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07usbcore/driver: Fix specific driver selectionM. Vefa Bicakci
commit aea850cd35ae3d266fe6f93fb9edb25e4a555230 upstream. This commit resolves a bug in the selection/discovery of more specific USB device drivers for devices that are currently bound to generic USB device drivers. The bug is in the logic that determines whether a device currently bound to a generic USB device driver should be re-probed by a more specific USB device driver or not. The code in __usb_bus_reprobe_drivers() used to have the following lines: if (usb_device_match_id(udev, new_udriver->id_table) == NULL && (!new_udriver->match || new_udriver->match(udev) != 0)) return 0; ret = device_reprobe(dev); As the reader will notice, the code checks whether the USB device in consideration matches the identifier table (id_table) of a specific USB device_driver (new_udriver), followed by a similar check, but this time with the USB device driver's match function. However, the match function's return value is not checked correctly. When match() returns zero, it means that the specific USB device driver is *not* applicable to the USB device in question, but the code then goes on to reprobe the device with the new USB device driver under consideration. All this to say, the logic is inverted. This bug was found by code inspection and instrumentation while investigating the root cause of the issue reported by Andrey Konovalov, where usbip took over syzkaller's virtual USB devices in an undesired manner. The report is linked below. Fixes: d5643d2249b2 ("USB: Fix device driver race") Cc: <stable@vger.kernel.org> # 5.8 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Bastien Nocera <hadess@hadess.net> Cc: Shuah Khan <shuah@kernel.org> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: <syzkaller@googlegroups.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Link: https://lore.kernel.org/r/20200922110703.720960-3-m.v.b@runbox.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07Revert "usbip: Implement a match function to fix usbip"M. Vefa Bicakci
commit d6407613c1e2ef90213dee388aa16b6e1bd08cbc upstream. This commit reverts commit 7a2f2974f265 ("usbip: Implement a match function to fix usbip"). In summary, commit d5643d2249b2 ("USB: Fix device driver race") inadvertently broke usbip functionality, which I resolved in an incorrect manner by introducing a match function to usbip, usbip_match(), that unconditionally returns true. However, the usbip_match function, as is, causes usbip to take over virtual devices used by syzkaller for USB fuzzing, which is a regression reported by Andrey Konovalov. Furthermore, in conjunction with the fix of another bug, handled by another patch titled "usbcore/driver: Fix specific driver selection" in this patch set, the usbip_match function causes unexpected USB subsystem behaviour when the usbip_host driver is loaded. The unexpected behaviour can be qualified as follows: - If commit 41160802ab8e ("USB: Simplify USB ID table match") is included in the kernel, then all USB devices are bound to the usbip_host driver, which appears to the user as if all USB devices were disconnected. - If the same commit (41160802ab8e) is not in the kernel (as is the case with v5.8.10) then all USB devices are re-probed and re-bound to their original device drivers, which appears to the user as a disconnection and re-connection of USB devices. Please note that this commit will make usbip non-operational again, until yet another patch in this patch set is merged, titled "usbcore/driver: Accommodate usbip". Cc: <stable@vger.kernel.org> # 5.8: 41160802ab8e: USB: Simplify USB ID table match Cc: <stable@vger.kernel.org> # 5.8 Cc: Bastien Nocera <hadess@hadess.net> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: <syzkaller@googlegroups.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Link: https://lore.kernel.org/r/20200922110703.720960-2-m.v.b@runbox.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07USB: gadget: f_ncm: Fix NDP16 datagram validationBryan O'Donoghue
commit 2b405533c2560d7878199c57d95a39151351df72 upstream. commit 2b74b0a04d3e ("USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()") adds important bounds checking however it unfortunately also introduces a bug with respect to section 3.3.1 of the NCM specification. wDatagramIndex[1] : "Byte index, in little endian, of the second datagram described by this NDP16. If zero, then this marks the end of the sequence of datagrams in this NDP16." wDatagramLength[1]: "Byte length, in little endian, of the second datagram described by this NDP16. If zero, then this marks the end of the sequence of datagrams in this NDP16." wDatagramIndex[1] and wDatagramLength[1] respectively then may be zero but that does not mean we should throw away the data referenced by wDatagramIndex[0] and wDatagramLength[0] as is currently the case. Breaking the loop on (index2 == 0 || dg_len2 == 0) should come at the end as was previously the case and checks for index2 and dg_len2 should be removed since zero is valid. I'm not sure how much testing the above patch received but for me right now after enumeration ping doesn't work. Reverting the commit restores ping, scp, etc. The extra validation associated with wDatagramIndex[0] and wDatagramLength[0] appears to be valid so, this change removes the incorrect restriction on wDatagramIndex[1] and wDatagramLength[1] restoring data processing between host and device. Fixes: 2b74b0a04d3e ("USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()") Cc: Ilja Van Sprundel <ivansprundel@ioactive.com> Cc: Brooke Basile <brookebasile@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20200920170158.1217068-1-bryan.odonoghue@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07mmc: sdhci: Workaround broken command queuing on Intel GLK based IRBIS modelsHans de Goede
commit afd7f30886b0b445a4240a99020458a9772f2b89 upstream. Commit bedf9fc01ff1 ("mmc: sdhci: Workaround broken command queuing on Intel GLK"), disabled command-queuing on Intel GLK based LENOVO models because of it being broken due to what is believed to be a bug in the BIOS. It seems that the BIOS of some IRBIS models, including the IRBIS NB111 model has the same issue, so disable command queuing there too. Fixes: bedf9fc01ff1 ("mmc: sdhci: Workaround broken command queuing on Intel GLK") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209397 Reported-and-tested-by: RussianNeuroMancer <russianneuromancer@ya.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200927104821.5676-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07btrfs: fix filesystem corruption after a device replaceFilipe Manana
commit 4c8f353272dd1262013873990c0fafd0e3c8f274 upstream. We use a device's allocation state tree to track ranges in a device used for allocated chunks, and we set ranges in this tree when allocating a new chunk. However after a device replace operation, we were not setting the allocated ranges in the new device's allocation state tree, so that tree is empty after a device replace. This means that a fitrim operation after a device replace will trim the device ranges that have allocated chunks and extents, as we trim every range for which there is not a range marked in the device's allocation state tree. It is also important during chunk allocation, since the device's allocation state is used to determine if a range is already allocated when allocating a new chunk. This is trivial to reproduce and the following script triggers the bug: $ cat reproducer.sh #!/bin/bash DEV1="/dev/sdg" DEV2="/dev/sdh" DEV3="/dev/sdi" wipefs -a $DEV1 $DEV2 $DEV3 &> /dev/null # Create a raid1 test fs on 2 devices. mkfs.btrfs -f -m raid1 -d raid1 $DEV1 $DEV2 > /dev/null mount $DEV1 /mnt/btrfs xfs_io -f -c "pwrite -S 0xab 0 10M" /mnt/btrfs/foo echo "Starting to replace $DEV1 with $DEV3" btrfs replace start -B $DEV1 $DEV3 /mnt/btrfs echo echo "Running fstrim" fstrim /mnt/btrfs echo echo "Unmounting filesystem" umount /mnt/btrfs echo "Mounting filesystem in degraded mode using $DEV3 only" wipefs -a $DEV1 $DEV2 &> /dev/null mount -o degraded $DEV3 /mnt/btrfs if [ $? -ne 0 ]; then dmesg | tail echo echo "Failed to mount in degraded mode" exit 1 fi echo echo "File foo data (expected all bytes = 0xab):" od -A d -t x1 /mnt/btrfs/foo umount /mnt/btrfs When running the reproducer: $ ./replace-test.sh wrote 10485760/10485760 bytes at offset 0 10 MiB, 2560 ops; 0.0901 sec (110.877 MiB/sec and 28384.5216 ops/sec) Starting to replace /dev/sdg with /dev/sdi Running fstrim Unmounting filesystem Mounting filesystem in degraded mode using /dev/sdi only mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/sdi, missing codepage or helper program, or other error. [19581.748641] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi started [19581.803842] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi finished [19582.208293] BTRFS info (device sdi): allowing degraded mounts [19582.208298] BTRFS info (device sdi): disk space caching is enabled [19582.208301] BTRFS info (device sdi): has skinny extents [19582.212853] BTRFS warning (device sdi): devid 2 uuid 1f731f47-e1bb-4f00-bfbb-9e5a0cb4ba9f is missing [19582.213904] btree_readpage_end_io_hook: 25839 callbacks suppressed [19582.213907] BTRFS error (device sdi): bad tree block start, want 30490624 have 0 [19582.214780] BTRFS warning (device sdi): failed to read root (objectid=7): -5 [19582.231576] BTRFS error (device sdi): open_ctree failed Failed to mount in degraded mode So fix by setting all allocated ranges in the replace target device when the replace operation is finishing, when we are holding the chunk mutex and we can not race with new chunk allocations. A test case for fstests follows soon. Fixes: 1c11b63eff2a67 ("btrfs: replace pending/pinned chunks lists with io tree") CC: stable@vger.kernel.org # 5.2+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07io_uring: always delete double poll wait entry on matchJens Axboe
commit 8706e04ed7d6c95004d42b22a4db97d5b2eb73b2 upstream. syzbot reports a crash with tty polling, which is using the double poll handling: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f] CPU: 0 PID: 6874 Comm: syz-executor749 Not tainted 5.9.0-rc6-next-20200924-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:io_poll_get_single fs/io_uring.c:4778 [inline] RIP: 0010:io_poll_double_wake+0x51/0x510 fs/io_uring.c:4845 Code: fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 9e 03 00 00 48 b8 00 00 00 00 00 fc ff df 49 8b 5d 08 48 8d 7b 48 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 63 03 00 00 0f b6 6b 48 bf 06 00 00 RSP: 0018:ffffc90001c1fb70 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000004 RDX: 0000000000000009 RSI: ffffffff81d9b3ad RDI: 0000000000000048 RBP: dffffc0000000000 R08: ffff8880a3cac798 R09: ffffc90001c1fc60 R10: fffff52000383f73 R11: 0000000000000000 R12: 0000000000000004 R13: ffff8880a3cac798 R14: ffff8880a3cac7a0 R15: 0000000000000004 FS: 0000000001f98880(0000) GS:ffff8880ae400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f18886916c0 CR3: 0000000094c5a000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __wake_up_common+0x147/0x650 kernel/sched/wait.c:93 __wake_up_common_lock+0xd0/0x130 kernel/sched/wait.c:123 tty_ldisc_hangup+0x1cf/0x680 drivers/tty/tty_ldisc.c:735 __tty_hangup.part.0+0x403/0x870 drivers/tty/tty_io.c:625 __tty_hangup drivers/tty/tty_io.c:575 [inline] tty_vhangup+0x1d/0x30 drivers/tty/tty_io.c:698 pty_close+0x3f5/0x550 drivers/tty/pty.c:79 tty_release+0x455/0xf60 drivers/tty/tty_io.c:1679 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:165 [inline] exit_to_user_mode_prepare+0x1e2/0x1f0 kernel/entry/common.c:192 syscall_exit_to_user_mode+0x7a/0x2c0 kernel/entry/common.c:267 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x401210 which is due to a failure in removing the double poll wait entry if we hit a wakeup match. This can cause multiple invocations of the wakeup, which isn't safe. Cc: stable@vger.kernel.org # v5.8 Reported-by: syzbot+81b3883093f772addf6d@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01Linux 5.8.13v5.8.13Greg Kroah-Hartman
Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20200929105929.719230296@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01clocksource/drivers/timer-ti-dm: Do reset before enableTony Lindgren
commit 164805157f3c6834670afbaff563353c773131f1 upstream. Commit 6cfcd5563b4f ("clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4") exposed a new issue for type2 dual mode timers on at least omap5 where the clockevent will stop when the SoC starts entering idle states during the boot. Turns out we are wrongly first enabling the system timer and then resetting it, while we must also re-enable it after reset. The current sequence leaves the timer module in a partially initialized state. This issue went unnoticed earlier with ti-sysc driver reconfiguring the timer module until we fixed the issue of ti-sysc reconfiguring system timers. Let's fix the issue by calling dmtimer_systimer_enable() from reset for both type1 and type2 timers, and switch the order of reset and enable in dmtimer_systimer_setup(). Let's also move dmtimer_systimer_enable() and dmtimer_systimer_disable() to do this without adding forward declarations. Fixes: 6cfcd5563b4f ("clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4") Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200817092428.6176-1-tony@atomide.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01dm: fix bio splitting and its bio completion order for regular IOMike Snitzer
commit ee1dfad5325ff1cfb2239e564cd411b3bfe8667a upstream. dm_queue_split() is removed because __split_and_process_bio() _must_ handle splitting bios to ensure proper bio submission and completion ordering as a bio is split. Otherwise, multiple recursive calls to ->submit_bio will cause multiple split bios to be allocated from the same ->bio_split mempool at the same time. This would result in deadlock in low memory conditions because no progress could be made (only one bio is available in ->bio_split mempool). This fix has been verified to still fix the loss of performance, due to excess splitting, that commit 120c9257f5f1 provided. Fixes: 120c9257f5f1 ("Revert "dm: always call blk_queue_split() in dm_process_bio()"") Cc: stable@vger.kernel.org # 5.0+, requires custom backport due to 5.9 changes Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetchMarc Zyngier
commit c4ad98e4b72cb5be30ea282fce935248f2300e62 upstream. KVM currently assumes that an instruction abort can never be a write. This is in general true, except when the abort is triggered by a S1PTW on instruction fetch that tries to update the S1 page tables (to set AF, for example). This can happen if the page tables have been paged out and brought back in without seeing a direct write to them (they are thus marked read only), and the fault handling code will make the PT executable(!) instead of writable. The guest gets stuck forever. In these conditions, the permission fault must be considered as a write so that the Stage-1 update can take place. This is essentially the I-side equivalent of the problem fixed by 60e21a0ef54c ("arm64: KVM: Take S1 walks into account when determining S2 write faults"). Update kvm_is_write_fault() to return true on IABT+S1PTW, and introduce kvm_vcpu_trap_is_exec_fault() that only return true when no faulting on a S1 fault. Additionally, kvm_vcpu_dabt_iss1tw() is renamed to kvm_vcpu_abt_iss1tw(), as the above makes it plain that it isn't specific to data abort. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200915104218.1284701-2-maz@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01io_uring: ensure open/openat2 name is cleaned on cancelationJens Axboe
commit f3cd4850504ff612d0ea77a0aaf29b66c98fcefe upstream. If we cancel these requests, we'll leak the memory associated with the filename. Add them to the table of ops that need cleaning, if REQ_F_NEED_CLEANUP is set. Cc: stable@vger.kernel.org Fixes: e62753e4e292 ("io_uring: call statx directly") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01s390/zcrypt: Fix ZCRYPT_PERDEV_REQCNT ioctlChristian Borntraeger
commit f7e80983f0cf470bb82036e73bff4d5a7daf8fc2 upstream. reqcnt is an u32 pointer but we do copy sizeof(reqcnt) which is the size of the pointer. This means we only copy 8 byte. Let us copy the full monty. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: stable@vger.kernel.org Fixes: af4a72276d49 ("s390/zcrypt: Support up to 256 crypto adapters.") Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01mm: don't rely on system state to detect hot-plug operationsLaurent Dufour
commit f85086f95fa36194eb0db5cd5c12e56801b98523 upstream. In register_mem_sect_under_node() the system_state's value is checked to detect whether the call is made during boot time or during an hot-plug operation. Unfortunately, that check against SYSTEM_BOOTING is wrong because regular memory is registered at SYSTEM_SCHEDULING state. In addition, memory hot-plug operation can be triggered at this system state by the ACPI [1]. So checking against the system state is not enough. The consequence is that on system with interleaved node's ranges like this: Early memory node ranges node 1: [mem 0x0000000000000000-0x000000011fffffff] node 2: [mem 0x0000000120000000-0x000000014fffffff] node 1: [mem 0x0000000150000000-0x00000001ffffffff] node 0: [mem 0x0000000200000000-0x000000048fffffff] node 2: [mem 0x0000000490000000-0x00000007ffffffff] This can be seen on PowerPC LPAR after multiple memory hot-plug and hot-unplug operations are done. At the next reboot the node's memory ranges can be interleaved and since the call to link_mem_sections() is made in topology_init() while the system is in the SYSTEM_SCHEDULING state, the node's id is not checked, and the sections registered to multiple nodes: $ ls -l /sys/devices/system/memory/memory21/node* total 0 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2 In that case, the system is able to boot but if later one of theses memory blocks is hot-unplugged and then hot-plugged, the sysfs inconsistency is detected and this is triggering a BUG_ON(): kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4 CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25 Call Trace: add_memory_resource+0x23c/0x340 (unreliable) __add_memory+0x5c/0xf0 dlpar_add_lmb+0x1b4/0x500 dlpar_memory+0x1f8/0xb80 handle_dlpar_errorlog+0xc0/0x190 dlpar_store+0x198/0x4a0 kobj_attr_store+0x30/0x50 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 vfs_write+0xe8/0x290 ksys_write+0xdc/0x130 system_call_exception+0x160/0x270 system_call_common+0xf0/0x27c This patch addresses the root cause by not relying on the system_state value to detect whether the call is due to a hot-plug operation. An extra parameter is added to link_mem_sections() detailing whether the operation is due to a hot-plug operation. [1] According to Oscar Salvador, using this qemu command line, ACPI memory hotplug operations are raised at SYSTEM_SCHEDULING state: $QEMU -enable-kvm -machine pc -smp 4,sockets=4,cores=1,threads=1 -cpu host -monitor pty \ -m size=$MEM,slots=255,maxmem=4294967296k \ -numa node,nodeid=0,cpus=0-3,mem=512 -numa node,nodeid=1,mem=512 \ -object memory-backend-ram,id=memdimm0,size=134217728 -device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0 \ -object memory-backend-ram,id=memdimm1,size=134217728 -device pc-dimm,node=0,memdev=memdimm1,id=dimm1,slot=1 \ -object memory-backend-ram,id=memdimm2,size=134217728 -device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \ -object memory-backend-ram,id=memdimm3,size=134217728 -device pc-dimm,node=0,memdev=memdimm3,id=dimm3,slot=3 \ -object memory-backend-ram,id=memdimm4,size=134217728 -device pc-dimm,node=1,memdev=memdimm4,id=dimm4,slot=4 \ -object memory-backend-ram,id=memdimm5,size=134217728 -device pc-dimm,node=1,memdev=memdimm5,id=dimm5,slot=5 \ -object memory-backend-ram,id=memdimm6,size=134217728 -device pc-dimm,node=1,memdev=memdimm6,id=dimm6,slot=6 \ Fixes: 4fbce633910e ("mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()") Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200915094143.79181-3-ldufour@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01mm: replace memmap_context by meminit_contextLaurent Dufour
commit c1d0da83358a2316d9be7f229f26126dbaa07468 upstream. Patch series "mm: fix memory to node bad links in sysfs", v3. Sometimes, firmware may expose interleaved memory layout like this: Early memory node ranges node 1: [mem 0x0000000000000000-0x000000011fffffff] node 2: [mem 0x0000000120000000-0x000000014fffffff] node 1: [mem 0x0000000150000000-0x00000001ffffffff] node 0: [mem 0x0000000200000000-0x000000048fffffff] node 2: [mem 0x0000000490000000-0x00000007ffffffff] In that case, we can see memory blocks assigned to multiple nodes in sysfs: $ ls -l /sys/devices/system/memory/memory21 total 0 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2 -rw-r--r-- 1 root root 65536 Aug 24 05:27 online -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index drwxr-xr-x 2 root root 0 Aug 24 05:27 power -r--r--r-- 1 root root 65536 Aug 24 05:27 removable -rw-r--r-- 1 root root 65536 Aug 24 05:27 state lrwxrwxrwx 1 root root 0 Aug 24 05:25 subsystem -> ../../../../bus/memory -rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent -r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones The same applies in the node's directory with a memory21 link in both the node1 and node2's directory. This is wrong but doesn't prevent the system to run. However when later, one of these memory blocks is hot-unplugged and then hot-plugged, the system is detecting an inconsistency in the sysfs layout and a BUG_ON() is raised: kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084! LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4 CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25 Call Trace: add_memory_resource+0x23c/0x340 (unreliable) __add_memory+0x5c/0xf0 dlpar_add_lmb+0x1b4/0x500 dlpar_memory+0x1f8/0xb80 handle_dlpar_errorlog+0xc0/0x190 dlpar_store+0x198/0x4a0 kobj_attr_store+0x30/0x50 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 vfs_write+0xe8/0x290 ksys_write+0xdc/0x130 system_call_exception+0x160/0x270 system_call_common+0xf0/0x27c This has been seen on PowerPC LPAR. The root cause of this issue is that when node's memory is registered, the range used can overlap another node's range, thus the memory block is registered to multiple nodes in sysfs. There are two issues here: (a) The sysfs memory and node's layouts are broken due to these multiple links (b) The link errors in link_mem_sections() should not lead to a system panic. To address (a) register_mem_sect_under_node should not rely on the system state to detect whether the link operation is triggered by a hot plug operation or not. This is addressed by the patches 1 and 2 of this series. Issue (b) will be addressed separately. This patch (of 2): The memmap_context enum is used to detect whether a memory operation is due to a hot-add operation or happening at boot time. Make it general to the hotplug operation and rename it as meminit_context. There is no functional change introduced by this patch Suggested-by: David Hildenbrand <david@redhat.com> Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200915094143.79181-1-ldufour@linux.ibm.com Link: https://lkml.kernel.org/r/20200915132624.9723-1-ldufour@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01mm/gup: fix gup_fast with dynamic page table foldingVasily Gorbik
commit d3f7b1bb204099f2f7306318896223e8599bb6a2 upstream. Currently to make sure that every page table entry is read just once gup_fast walks perform READ_ONCE and pass pXd value down to the next gup_pXd_range function by value e.g.: static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end, unsigned int flags, struct page **pages, int *nr) ... pudp = pud_offset(&p4d, addr); This function passes a reference on that local value copy to pXd_offset, and might get the very same pointer in return. This happens when the level is folded (on most arches), and that pointer should not be iterated. On s390 due to the fact that each task might have different 5,4 or 3-level address translation and hence different levels folded the logic is more complex and non-iteratable pointer to a local copy leads to severe problems. Here is an example of what happens with gup_fast on s390, for a task with 3-level paging, crossing a 2 GB pud boundary: // addr = 0x1007ffff000, end = 0x10080001000 static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end, unsigned int flags, struct page **pages, int *nr) { unsigned long next; pud_t *pudp; // pud_offset returns &p4d itself (a pointer to a value on stack) pudp = pud_offset(&p4d, addr); do { // on second iteratation reading "random" stack value pud_t pud = READ_ONCE(*pudp); // next = 0x10080000000, due to PUD_SIZE/MASK != PGDIR_SIZE/MASK on s390 next = pud_addr_end(addr, end); ... } while (pudp++, addr = next, addr != end); // pudp++ iterating over stack return 1; } This happens since s390 moved to common gup code with commit d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") and commit 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code"). s390 tried to mimic static level folding by changing pXd_offset primitives to always calculate top level page table offset in pgd_offset and just return the value passed when pXd_offset has to act as folded. What is crucial for gup_fast and what has been overlooked is that PxD_SIZE/MASK and thus pXd_addr_end should also change correspondingly. And the latter is not possible with dynamic folding. To fix the issue in addition to pXd values pass original pXdp pointers down to gup_pXd_range functions. And introduce pXd_offset_lockless helpers, which take an additional pXd entry value parameter. This has already been discussed in https://lkml.kernel.org/r/20190418100218.0a4afd51@mschwideX1 Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: <stable@vger.kernel.org> [5.2+] Link: https://lkml.kernel.org/r/patch.git-943f1e5dcff2.your-ad-here.call-01599856292-ext-8676@work.hours Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01mm, THP, swap: fix allocating cluster for swapfile by mistakeGao Xiang
commit 41663430588c737dd735bad5a0d1ba325dcabd59 upstream. SWP_FS is used to make swap_{read,write}page() go through the filesystem, and it's only used for swap files over NFS. So, !SWP_FS means non NFS for now, it could be either file backed or device backed. Something similar goes with legacy SWP_FILE. So in order to achieve the goal of the original patch, SWP_BLKDEV should be used instead. FS corruption can be observed with SSD device + XFS + fragmented swapfile due to CONFIG_THP_SWAP=y. I reproduced the issue with the following details: Environment: QEMU + upstream kernel + buildroot + NVMe (2 GB) Kernel config: CONFIG_BLK_DEV_NVME=y CONFIG_THP_SWAP=y Some reproducible steps: mkfs.xfs -f /dev/nvme0n1 mkdir /tmp/mnt mount /dev/nvme0n1 /tmp/mnt bs="32k" sz="1024m" # doesn't matter too much, I also tried 16m xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw xfs_io -f -c "pwrite -F -S 0 -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fsync" /tmp/mnt/sw mkswap /tmp/mnt/sw swapon /tmp/mnt/sw stress --vm 2 --vm-bytes 600M # doesn't matter too much as well Symptoms: - FS corruption (e.g. checksum failure) - memory corruption at: 0xd2808010 - segfault Fixes: f0eea189e8e9 ("mm, THP, swap: Don't allocate huge cluster for file backed swap device") Fixes: 38d8b4e6bdc8 ("mm, THP, swap: delay splitting THP during swap out") Signed-off-by: Gao Xiang <hsiangkao@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Eric Sandeen <esandeen@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200820045323.7809-1-hsiangkao@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01dmabuf: fix NULL pointer dereference in dma_buf_release()Charan Teja Reddy
commit 19a508bd1ad8e444de86873bf2f2b2ab8edd6552 upstream. NULL pointer dereference is observed while exporting the dmabuf but failed to allocate the 'struct file' which results into the dropping of the allocated dentry corresponding to this file in the dmabuf fs, which is ending up in dma_buf_release() and accessing the uninitialzed dentry->d_fsdata. Call stack on 5.4 is below: dma_buf_release+0x2c/0x254 drivers/dma-buf/dma-buf.c:88 __dentry_kill+0x294/0x31c fs/dcache.c:584 dentry_kill fs/dcache.c:673 [inline] dput+0x250/0x380 fs/dcache.c:859 path_put+0x24/0x40 fs/namei.c:485 alloc_file_pseudo+0x1a4/0x200 fs/file_table.c:235 dma_buf_getfile drivers/dma-buf/dma-buf.c:473 [inline] dma_buf_export+0x25c/0x3ec drivers/dma-buf/dma-buf.c:585 Fix this by checking for the valid pointer in the dentry->d_fsdata. Fixes: 4ab59c3c638c ("dma-buf: Move dma_buf_release() from fops to dentry_ops") Cc: <stable@vger.kernel.org> [5.7+] Signed-off-by: Charan Teja Reddy <charante@codeaurora.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/391319/ Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01MIPS: Loongson2ef: Disable Loongson MMI instructionsJiaxun Yang
commit b13812ddea615b6507beef24f76540c0c1143c5c upstream. It was missed when I was forking Loongson2ef from Loongson64 but should be applied to Loongson2ef as march=loongson2f will also enable Loongson MMI in GCC-9+. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Fixes: 71e2f4dd5a65 ("MIPS: Fork loongson2ef from loongson64") Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: stable@vger.kernel.org # v5.8+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01media: cec-adap.c: don't use flush_scheduled_work()Hans Verkuil
commit 288eceb0858323d66bff03cf386630a797b248ad upstream. For some inexplicable reason I decided to call flush_scheduled_work() instead of cancel_delayed_work_sync(). The problem with that is that flush_scheduled_work() waits for *all* queued scheduled work to be completed instead of just the work itself. This can cause a deadlock if a CEC driver also schedules work that takes the same lock. See the comments for flush_scheduled_work() in linux/workqueue.h. This is exactly what has been observed a few times. This patch simply replaces flush_scheduled_work() by cancel_delayed_work_sync(). Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: <stable@vger.kernel.org> # for v5.8 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01btrfs: fix overflow when copying corrupt csums for a messageJohannes Thumshirn
commit 35be8851d172c6e3db836c0f28c19087b10c9e00 upstream. Syzkaller reported a buffer overflow in btree_readpage_end_io_hook() when loop mounting a crafted image: detected buffer overflow in memcpy ------------[ cut here ]------------ kernel BUG at lib/string.c:1129! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 26 Comm: kworker/u4:2 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: btrfs-endio-meta btrfs_work_helper RIP: 0010:fortify_panic+0xf/0x20 lib/string.c:1129 RSP: 0018:ffffc90000e27980 EFLAGS: 00010286 RAX: 0000000000000022 RBX: ffff8880a80dca64 RCX: 0000000000000000 RDX: ffff8880a90860c0 RSI: ffffffff815dba07 RDI: fffff520001c4f22 RBP: ffff8880a80dca00 R08: 0000000000000022 R09: ffff8880ae7318e7 R10: 0000000000000000 R11: 0000000000077578 R12: 00000000ffffff6e R13: 0000000000000008 R14: ffffc90000e27a40 R15: 1ffff920001c4f3c FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000557335f440d0 CR3: 000000009647d000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: memcpy include/linux/string.h:405 [inline] btree_readpage_end_io_hook.cold+0x206/0x221 fs/btrfs/disk-io.c:642 end_bio_extent_readpage+0x4de/0x10c0 fs/btrfs/extent_io.c:2854 bio_endio+0x3cf/0x7f0 block/bio.c:1449 end_workqueue_fn+0x114/0x170 fs/btrfs/disk-io.c:1695 btrfs_work_helper+0x221/0xe20 fs/btrfs/async-thread.c:318 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 Modules linked in: ---[ end trace b68924293169feef ]--- RIP: 0010:fortify_panic+0xf/0x20 lib/string.c:1129 RSP: 0018:ffffc90000e27980 EFLAGS: 00010286 RAX: 0000000000000022 RBX: ffff8880a80dca64 RCX: 0000000000000000 RDX: ffff8880a90860c0 RSI: ffffffff815dba07 RDI: fffff520001c4f22 RBP: ffff8880a80dca00 R08: 0000000000000022 R09: ffff8880ae7318e7 R10: 0000000000000000 R11: 0000000000077578 R12: 00000000ffffff6e R13: 0000000000000008 R14: ffffc90000e27a40 R15: 1ffff920001c4f3c FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f95b7c4d008 CR3: 000000009647d000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 The overflow happens, because in btree_readpage_end_io_hook() we assume that we have found a 4 byte checksum instead of the real possible 32 bytes we have for the checksums. With the fix applied: [ 35.726623] BTRFS: device fsid 815caf9a-dc43-4d2a-ac54-764b8333d765 devid 1 transid 5 /dev/loop0 scanned by syz-repro (215) [ 35.738994] BTRFS info (device loop0): disk space caching is enabled [ 35.738998] BTRFS info (device loop0): has skinny extents [ 35.743337] BTRFS warning (device loop0): loop0 checksum verify failed on 1052672 wanted 0xf9c035fc8d239a54 found 0x67a25c14b7eabcf9 level 0 [ 35.743420] BTRFS error (device loop0): failed to read chunk root [ 35.745899] BTRFS error (device loop0): open_ctree failed Reported-by: syzbot+e864a35d361e1d4e29a5@syzkaller.appspotmail.com Fixes: d5178578bcd4 ("btrfs: directly call into crypto framework for checksumming") CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-01 13:40:29 +0000