| Age | Commit message (Collapse) | Author |
|---|
|
|
|
flush_dcache_range
commit 6f4679b956741d2da6ad3ebb738cbe1264ac8781 upstream.
This patch fix the below kernel crash.
BUG: Unable to handle kernel data access on read at 0xc000000380000000
Faulting instruction address: 0xc00000000008b6f0
cpu 0x5: Vector: 300 (Data Access) at [c0000000d8587790]
pc: c00000000008b6f0: arch_remove_memory+0x150/0x210
lr: c00000000008b720: arch_remove_memory+0x180/0x210
sp: c0000000d8587a20
msr: 800000000280b033
dar: c000000380000000
dsisr: 40000000
current = 0xc0000000d8558600
paca = 0xc00000000fff8f00 irqmask: 0x03 irq_happened: 0x01
pid = 1220, comm = ndctl
enter ? for help
memunmap_pages+0x33c/0x410
devm_action_release+0x30/0x50
release_nodes+0x30c/0x3a0
device_release_driver_internal+0x178/0x240
unbind_store+0x74/0x190
drv_attr_store+0x44/0x60
sysfs_kf_write+0x74/0xa0
kernfs_fop_write+0x1b0/0x260
__vfs_write+0x3c/0x70
vfs_write+0xe4/0x200
ksys_write+0x7c/0x140
system_call+0x5c/0x68
Fixes: 076265907cf9 ("powerpc: Chunk calls to flush_dcache_range in arch_*_memory")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191204052909.59145-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
[ Upstream commit c77c0a8ac4c522638a8242fcb9de9496e3cdbb2d ]
The following lockdep splat was observed when a certain hugetlbfs test
was run:
================================
WARNING: inconsistent lock state
4.18.0-159.el8.x86_64+debug #1 Tainted: G W --------- - -
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/30/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffffffff9acdc038 (hugetlb_lock){+.?.}, at: free_huge_page+0x36f/0xaa0
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0x14f/0x3b0
_raw_spin_lock+0x30/0x70
__nr_hugepages_store_common+0x11b/0xb30
hugetlb_sysctl_handler_common+0x209/0x2d0
proc_sys_call_handler+0x37f/0x450
vfs_write+0x157/0x460
ksys_write+0xb8/0x170
do_syscall_64+0xa5/0x4d0
entry_SYSCALL_64_after_hwframe+0x6a/0xdf
irq event stamp: 691296
hardirqs last enabled at (691296): [<ffffffff99bb034b>] _raw_spin_unlock_irqrestore+0x4b/0x60
hardirqs last disabled at (691295): [<ffffffff99bb0ad2>] _raw_spin_lock_irqsave+0x22/0x81
softirqs last enabled at (691284): [<ffffffff97ff0c63>] irq_enter+0xc3/0xe0
softirqs last disabled at (691285): [<ffffffff97ff0ebe>] irq_exit+0x23e/0x2b0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(hugetlb_lock);
<Interrupt>
lock(hugetlb_lock);
*** DEADLOCK ***
:
Call Trace:
<IRQ>
__lock_acquire+0x146b/0x48c0
lock_acquire+0x14f/0x3b0
_raw_spin_lock+0x30/0x70
free_huge_page+0x36f/0xaa0
bio_check_pages_dirty+0x2fc/0x5c0
clone_endio+0x17f/0x670 [dm_mod]
blk_update_request+0x276/0xe50
scsi_end_request+0x7b/0x6a0
scsi_io_completion+0x1c6/0x1570
blk_done_softirq+0x22e/0x350
__do_softirq+0x23d/0xad8
irq_exit+0x23e/0x2b0
do_IRQ+0x11a/0x200
common_interrupt+0xf/0xf
</IRQ>
Both the hugetbl_lock and the subpool lock can be acquired in
free_huge_page(). One way to solve the problem is to make both locks
irq-safe. However, Mike Kravetz had learned that the hugetlb_lock is
held for a linear scan of ALL hugetlb pages during a cgroup reparentling
operation. So it is just too long to have irq disabled unless we can
break hugetbl_lock down into finer-grained locks with shorter lock hold
times.
Another alternative is to defer the freeing to a workqueue job. This
patch implements the deferred freeing by adding a free_hpage_workfn()
work function to do the actual freeing. The free_huge_page() call in a
non-task context saves the page to be freed in the hpage_freelist linked
list in a lockless manner using the llist APIs.
The generic workqueue is used to process the work, but a dedicated
workqueue can be used instead if it is desirable to have the huge page
freed ASAP.
Thanks to Kirill Tkhai <ktkhai@virtuozzo.com> for suggesting the use of
llist APIs which simplfy the code.
Link: http://lkml.kernel.org/r/20191217170331.30893-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 92a35678ec075100ce666a2fb6969151affb0e5d ]
hsr nodes are protected by RCU and there is no write side lock.
But node insertions and deletions could be being operated concurrently.
So write side locking is needed.
Test commands:
ip netns add nst
ip link add veth0 type veth peer name veth1
ip link add veth2 type veth peer name veth3
ip link set veth1 netns nst
ip link set veth3 netns nst
ip link set veth0 up
ip link set veth2 up
ip link add hsr0 type hsr slave1 veth0 slave2 veth2
ip a a 192.168.100.1/24 dev hsr0
ip link set hsr0 up
ip netns exec nst ip link set veth1 up
ip netns exec nst ip link set veth3 up
ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3
ip netns exec nst ip a a 192.168.100.2/24 dev hsr1
ip netns exec nst ip link set hsr1 up
for i in {0..9}
do
for j in {0..9}
do
for k in {0..9}
do
for l in {0..9}
do
arping 192.168.100.2 -I hsr0 -s 00:01:3$i:4$j:5$k:6$l -c1 &
done
done
done
done
Splat looks like:
[ 236.066091][ T3286] list_add corruption. next->prev should be prev (ffff8880a5940300), but was ffff8880a5940d0.
[ 236.069617][ T3286] ------------[ cut here ]------------
[ 236.070545][ T3286] kernel BUG at lib/list_debug.c:25!
[ 236.071391][ T3286] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 236.072343][ T3286] CPU: 0 PID: 3286 Comm: arping Tainted: G W 5.5.0-rc1+ #209
[ 236.073463][ T3286] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 236.074695][ T3286] RIP: 0010:__list_add_valid+0x74/0xd0
[ 236.075499][ T3286] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 b
[ 236.078277][ T3286] RSP: 0018:ffff8880aaa97648 EFLAGS: 00010286
[ 236.086991][ T3286] RAX: 0000000000000075 RBX: ffff8880d4624c20 RCX: 0000000000000000
[ 236.088000][ T3286] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed1015552ebf
[ 236.098897][ T3286] RBP: ffff88809b53d200 R08: ffffed101b3c04f9 R09: ffffed101b3c04f9
[ 236.099960][ T3286] R10: 00000000308769a1 R11: ffffed101b3c04f8 R12: ffff8880d4624c28
[ 236.100974][ T3286] R13: ffff8880d4624c20 R14: 0000000040310100 R15: ffff8880ce17ee02
[ 236.138967][ T3286] FS: 00007f23479fa680(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000
[ 236.144852][ T3286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 236.145720][ T3286] CR2: 00007f4a14bab210 CR3: 00000000a61c6001 CR4: 00000000000606f0
[ 236.146776][ T3286] Call Trace:
[ 236.147222][ T3286] hsr_add_node+0x314/0x490 [hsr]
[ 236.153633][ T3286] hsr_forward_skb+0x2b6/0x1bc0 [hsr]
[ 236.154362][ T3286] ? rcu_read_lock_sched_held+0x90/0xc0
[ 236.155091][ T3286] ? rcu_read_lock_bh_held+0xa0/0xa0
[ 236.156607][ T3286] hsr_dev_xmit+0x70/0xd0 [hsr]
[ 236.157254][ T3286] dev_hard_start_xmit+0x160/0x740
[ 236.157941][ T3286] __dev_queue_xmit+0x1961/0x2e10
[ 236.158565][ T3286] ? netdev_core_pick_tx+0x2e0/0x2e0
[ ... ]
Reported-by: syzbot+3924327f9ad5f4d2b343@syzkaller.appspotmail.com
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1d19e2d53e8ed9e4c98fc95e0067492cda7288b0 ]
hsr_dev_finalize() is called to create new hsr interface.
There are some wrong error handling codes.
1. wrong checking return value of debugfs_create_{dir/file}.
These function doesn't return NULL. If error occurs in there,
it returns error pointer.
So, it should check error pointer instead of NULL.
2. It doesn't unregister interface if it fails to setup hsr interface.
If it fails to initialize hsr interface after register_netdevice(),
it should call unregister_netdevice().
3. Ignore failure of creation of debugfs
If creating of debugfs dir and file is failed, creating hsr interface
will be failed. But debugfs doesn't affect actual logic of hsr module.
So, ignoring this is more correct and this behavior is more general.
Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 84bb59d773853bc2dda2ac1ef8474c40eb33a3c6 ]
When hsr module is being removed, debugfs_remove() is called to remove
both debugfs directory and file.
When module is being removed, module state is changed to
MODULE_STATE_GOING then exit() is called.
At this moment, module couldn't be held so try_module_get()
will be failed.
debugfs's open() callback tries to hold the module if .owner is existing.
If it fails, warning message is printed.
CPU0 CPU1
delete_module()
try_stop_module()
hsr_exit() open() <-- WARNING
debugfs_remove()
In order to avoid the warning message, this patch makes hsr module does
not set .owner. Unsetting .owner is safe because these are protected by
inode_lock().
Test commands:
#SHELL1
ip link add dummy0 type dummy
ip link add dummy1 type dummy
while :
do
ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1
modprobe -rv hsr
done
#SHELL2
while :
do
cat /sys/kernel/debug/hsr0/node_table
done
Splat looks like:
[ 101.223783][ T1271] ------------[ cut here ]------------
[ 101.230309][ T1271] debugfs file owner did not clean up at exit: node_table
[ 101.230380][ T1271] WARNING: CPU: 3 PID: 1271 at fs/debugfs/file.c:309 full_proxy_open+0x10f/0x650
[ 101.233153][ T1271] Modules linked in: hsr(-) dummy veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_d]
[ 101.237112][ T1271] CPU: 3 PID: 1271 Comm: cat Tainted: G W 5.5.0-rc1+ #204
[ 101.238270][ T1271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 101.240379][ T1271] RIP: 0010:full_proxy_open+0x10f/0x650
[ 101.241166][ T1271] Code: 48 c1 ea 03 80 3c 02 00 0f 85 c1 04 00 00 49 8b 3c 24 e8 04 86 7e ff 84 c0 75 2d 4c 8
[ 101.251985][ T1271] RSP: 0018:ffff8880ca22fa38 EFLAGS: 00010286
[ 101.273355][ T1271] RAX: dffffc0000000008 RBX: ffff8880cc6e6200 RCX: 0000000000000000
[ 101.274466][ T1271] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffff8880c4dd5c14
[ 101.275581][ T1271] RBP: 0000000000000000 R08: fffffbfff2922f5d R09: 0000000000000000
[ 101.276733][ T1271] R10: 0000000000000001 R11: 0000000000000000 R12: ffffffffc0551bc0
[ 101.277853][ T1271] R13: ffff8880c4059a48 R14: ffff8880be50a5e0 R15: ffffffff941adaa0
[ 101.278956][ T1271] FS: 00007f8871cda540(0000) GS:ffff8880da800000(0000) knlGS:0000000000000000
[ 101.280216][ T1271] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 101.282832][ T1271] CR2: 00007f88717cfd10 CR3: 00000000b9440005 CR4: 00000000000606e0
[ 101.283974][ T1271] Call Trace:
[ 101.285328][ T1271] do_dentry_open+0x63c/0xf50
[ 101.286077][ T1271] ? open_proxy_open+0x270/0x270
[ 101.288271][ T1271] ? __x64_sys_fchdir+0x180/0x180
[ 101.288987][ T1271] ? inode_permission+0x65/0x390
[ 101.289682][ T1271] path_openat+0x701/0x2810
[ 101.290294][ T1271] ? path_lookupat+0x880/0x880
[ 101.290957][ T1271] ? check_chain_key+0x236/0x5d0
[ 101.291676][ T1271] ? __lock_acquire+0xdfe/0x3de0
[ 101.292358][ T1271] ? sched_clock+0x5/0x10
[ 101.292962][ T1271] ? sched_clock_cpu+0x18/0x170
[ 101.293644][ T1271] ? find_held_lock+0x39/0x1d0
[ 101.305616][ T1271] do_filp_open+0x17a/0x270
[ 101.306061][ T1271] ? may_open_dev+0xc0/0xc0
[ ... ]
Fixes: fc4ecaeebd26 ("net: hsr: add debugfs support for display node list")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7c68fa2bddda6d942bd387c9ba5b4300737fd991 ]
sk->sk_pacing_shift can be read and written without lock
synchronization. This patch adds annotations to
document this fact and avoid future syzbot complains.
This might also avoid unexpected false sharing
in sk_pacing_shift_update(), as the compiler
could remove the conditional check and always
write over sk->sk_pacing_shift :
if (sk->sk_pacing_shift != val)
sk->sk_pacing_shift = val;
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ff61541cc6c1962957758ba433c574b76f588d23 ]
Commit
8062382c8dbe2 ("perf/x86/intel/bts: Add BTS PMU driver")
brought in a warning with the BTS buffer initialization
that is easily tripped with (assuming KPTI is disabled):
instantly throwing:
> ------------[ cut here ]------------
> WARNING: CPU: 2 PID: 326 at arch/x86/events/intel/bts.c:86 bts_buffer_setup_aux+0x117/0x3d0
> Modules linked in:
> CPU: 2 PID: 326 Comm: perf Not tainted 5.4.0-rc8-00291-gceb9e77324fa #904
> RIP: 0010:bts_buffer_setup_aux+0x117/0x3d0
> Call Trace:
> rb_alloc_aux+0x339/0x550
> perf_mmap+0x607/0xc70
> mmap_region+0x76b/0xbd0
...
It appears to assume (for lost raisins) that PagePrivate() is set,
while later it actually tests for PagePrivate() before using
page_private().
Make it consistent and always check PagePrivate() before using
page_private().
Fixes: 8062382c8dbe2 ("perf/x86/intel/bts: Add BTS PMU driver")
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lkml.kernel.org/r/20191205142853.28894-2-alexander.shishkin@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a470552ee8965da0fe6fd4df0aa39c4cda652c7c ]
Commit:
1c5fecb61255aa12 ("efi: Export Runtime Configuration Interface table to sysfs")
... added support for a Dell specific UEFI configuration table, but
failed to take into account that mapping the table should not be
attempted unless the table actually exists. If it doesn't exist,
the code usually fails silently unless pr_debug() prints are
enabled. However, on 32-bit PAE x86, the splat below is produced due
to the attempt to map the placeholder value EFI_INVALID_TABLE_ADDR
which we use for non-existing UEFI configuration tables, and which
equals ULONG_MAX.
memremap attempted on mixed range 0x00000000ffffffff size: 0x1e
WARNING: CPU: 1 PID: 1 at kernel/iomem.c:81 memremap+0x1a3/0x1c0
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.2-smp-mine #1
Hardware name: Hewlett-Packard HP Z400 Workstation/0B4Ch, BIOS 786G3 v03.61 03/05/2018
EIP: memremap+0x1a3/0x1c0
...
Call Trace:
? map_properties+0x473/0x473
? efi_rci2_sysfs_init+0x2c/0x154
? map_properties+0x473/0x473
? do_one_initcall+0x49/0x1d4
? parse_args+0x1e8/0x2a0
? do_early_param+0x7a/0x7a
? kernel_init_freeable+0x139/0x1c2
? rest_init+0x8e/0x8e
? kernel_init+0xd/0xf2
? ret_from_fork+0x2e/0x38
Fix this by checking whether the table exists before attempting to map it.
Reported-by: Richard Narron <comet.berkeley@gmail.com>
Tested-by: Richard Narron <comet.berkeley@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Fixes: 1c5fecb61255aa12 ("efi: Export Runtime Configuration Interface table to sysfs")
Link: https://lkml.kernel.org/r/20191210090945.11501-2-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ce5c31db3645b649a31044a4d8b6057f6c723702 ]
At the moment, UBSAN report will be serialized using a spin_lock(). On
RT-systems, spinlocks are turned to rt_spin_lock and may sleep. This
will result to the following splat if the undefined behavior is in a
context that can sleep:
BUG: sleeping function called from invalid context at /src/linux/kernel/locking/rtmutex.c:968
in_atomic(): 1, irqs_disabled(): 128, pid: 3447, name: make
1 lock held by make/3447:
#0: 000000009a966332 (&mm->mmap_sem){++++}, at: do_page_fault+0x140/0x4f8
irq event stamp: 6284
hardirqs last enabled at (6283): [<ffff000011326520>] _raw_spin_unlock_irqrestore+0x90/0xa0
hardirqs last disabled at (6284): [<ffff0000113262b0>] _raw_spin_lock_irqsave+0x30/0x78
softirqs last enabled at (2430): [<ffff000010088ef8>] fpsimd_restore_current_state+0x60/0xe8
softirqs last disabled at (2427): [<ffff000010088ec0>] fpsimd_restore_current_state+0x28/0xe8
Preemption disabled at:
[<ffff000011324a4c>] rt_mutex_futex_unlock+0x4c/0xb0
CPU: 3 PID: 3447 Comm: make Tainted: G W 5.2.14-rt7-01890-ge6e057589653 #911
Call trace:
dump_backtrace+0x0/0x148
show_stack+0x14/0x20
dump_stack+0xbc/0x104
___might_sleep+0x154/0x210
rt_spin_lock+0x68/0xa0
ubsan_prologue+0x30/0x68
handle_overflow+0x64/0xe0
__ubsan_handle_add_overflow+0x10/0x18
__lock_acquire+0x1c28/0x2a28
lock_acquire+0xf0/0x370
_raw_spin_lock_irqsave+0x58/0x78
rt_mutex_futex_unlock+0x4c/0xb0
rt_spin_unlock+0x28/0x70
get_page_from_freelist+0x428/0x2b60
__alloc_pages_nodemask+0x174/0x1708
alloc_pages_vma+0x1ac/0x238
__handle_mm_fault+0x4ac/0x10b0
handle_mm_fault+0x1d8/0x3b0
do_page_fault+0x1c8/0x4f8
do_translation_fault+0xb8/0xe0
do_mem_abort+0x3c/0x98
el0_da+0x20/0x24
The spin_lock() will protect against multiple CPUs to output a report
together, I guess to prevent them from being interleaved. However, they
can still interleave with other messages (and even splat from
__might_sleep).
So the lock usefulness seems pretty limited. Rather than trying to
accomodate RT-system by switching to a raw_spin_lock(), the lock is now
completely dropped.
Link: http://lkml.kernel.org/r/20190920100835.14999-1-julien.grall@arm.com
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reported-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f9bd84a8a845d82f9b5a081a7ae68c98a11d2e84 ]
For each I/O request, blkback first maps the foreign pages for the
request to its local pages. If an allocation of a local page for the
mapping fails, it should unmap every mapping already made for the
request.
However, blkback's handling mechanism for the allocation failure does
not mark the remaining foreign pages as unmapped. Therefore, the unmap
function merely tries to unmap every valid grant page for the request,
including the pages not mapped due to the allocation failure. On a
system that fails the allocation frequently, this problem leads to
following kernel crash.
[ 372.012538] BUG: unable to handle kernel NULL pointer dereference at 0000000000000001
[ 372.012546] IP: [<ffffffff814071ac>] gnttab_unmap_refs.part.7+0x1c/0x40
[ 372.012557] PGD 16f3e9067 PUD 16426e067 PMD 0
[ 372.012562] Oops: 0002 [#1] SMP
[ 372.012566] Modules linked in: act_police sch_ingress cls_u32
...
[ 372.012746] Call Trace:
[ 372.012752] [<ffffffff81407204>] gnttab_unmap_refs+0x34/0x40
[ 372.012759] [<ffffffffa0335ae3>] xen_blkbk_unmap+0x83/0x150 [xen_blkback]
...
[ 372.012802] [<ffffffffa0336c50>] dispatch_rw_block_io+0x970/0x980 [xen_blkback]
...
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
This commit fixes this problem by marking the grant pages of the given
request that didn't mapped due to the allocation failure as invalid.
Fixes: c6cc142dac52 ("xen-blkback: use balloon pages for all mappings")
Reviewed-by: David Woodhouse <dwmw@amazon.de>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Paul Durrant <pdurrant@amazon.co.uk>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 030eab4f9ffb469344c10a46bc02c5149db0a2a9 ]
Building the kernel on s390 with -Og produces the following warning:
WARNING: vmlinux.o(.text+0x28dabe): Section mismatch in reference from the function populate_section_memmap() to the function .meminit.text:__populate_section_memmap()
The function populate_section_memmap() references
the function __meminit __populate_section_memmap().
This is often because populate_section_memmap lacks a __meminit
annotation or the annotation of __populate_section_memmap is wrong.
While -Og is not supported, in theory this might still happen with
another compiler or on another architecture. So fix this by using the
correct section annotations.
[iii@linux.ibm.com: v2]
Link: http://lkml.kernel.org/r/20191030151639.41486-1-iii@linux.ibm.com
Link: http://lkml.kernel.org/r/20191028165549.14478-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 72a81ad9d6d62dcb79f7e8ad66ffd1c768b72026 ]
If an SMT capable system is not IPL'ed from the first CPU the setup of
the physical to logical CPU mapping is broken: the IPL core gets CPU
number 0, but then the next core gets CPU number 1. Correct would be
that all SMT threads of CPU 0 get the subsequent logical CPU numbers.
This is important since a lot of code (like e.g. the CPU topology
code) assumes that CPU maps are setup like this. If the mapping is
broken the system will not IPL due to broken topology masks:
[ 1.716341] BUG: arch topology broken
[ 1.716342] the SMT domain not a subset of the MC domain
[ 1.716343] BUG: arch topology broken
[ 1.716344] the MC domain not a subset of the BOOK domain
This scenario can usually not happen since LPARs are always IPL'ed
from CPU 0 and also re-IPL is intiated from CPU 0. However older
kernels did initiate re-IPL on an arbitrary CPU. If therefore a re-IPL
from an old kernel into a new kernel is initiated this may lead to
crash.
Fix this by setting up the physical to logical CPU mapping correctly.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1d53c9e6723022b12e4a5ed4b141f67c834b7f6f ]
The btrfs writepages function collects a large range of pages flagged
for delayed allocation, and then sends them down through the COW code
for processing. When compression is on, we allocate one async_chunk
structure for every 512K, and then run those pages through the
compression code for IO submission.
writepages starts all of this off with a single page, locked by the
original call to extent_write_cache_pages(), and it's important to keep
track of this page because it has already been through
clear_page_dirty_for_io().
The btrfs async_chunk struct has a pointer to the locked_page, and when
we're redirtying the page because compression had to fallback to
uncompressed IO, we use page->index to decide if a given async_chunk
struct really owns that page.
But, this is racey. If a given delalloc range is broken up into two
async_chunks (chunkA and chunkB), we can end up with something like
this:
compress_file_range(chunkA)
submit_compress_extents(chunkA)
submit compressed bios(chunkA)
put_page(locked_page)
compress_file_range(chunkB)
...
Or:
async_cow_submit
submit_compressed_extents <--- falls back to buffered writeout
cow_file_range
extent_clear_unlock_delalloc
__process_pages_contig
put_page(locked_pages)
async_cow_submit
The end result is that chunkA is completed and cleaned up before chunkB
even starts processing. This means we can free locked_page() and reuse
it elsewhere. If we get really lucky, it'll have the same page->index
in its new home as it did before.
While we're processing chunkB, we might decide we need to fall back to
uncompressed IO, and so compress_file_range() will call
__set_page_dirty_nobufers() on chunkB->locked_page.
Without cgroups in use, this creates as a phantom dirty page, which
isn't great but isn't the end of the world. What can happen, it can go
through the fixup worker and the whole COW machinery again:
in submit_compressed_extents():
while (async extents) {
...
cow_file_range
if (!page_started ...)
extent_write_locked_range
else if (...)
unlock_page
continue;
This hasn't been observed in practice but is still possible.
With cgroups in use, we might crash in the accounting code because
page->mapping->i_wb isn't set.
BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0
IP: percpu_counter_add_batch+0x11/0x70
PGD 66534e067 P4D 66534e067 PUD 66534f067 PMD 0
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
CPU: 16 PID: 2172 Comm: rm Not tainted
RIP: 0010:percpu_counter_add_batch+0x11/0x70
RSP: 0018:ffffc9000a97bbe0 EFLAGS: 00010286
RAX: 0000000000000005 RBX: 0000000000000090 RCX: 0000000000026115
RDX: 0000000000000030 RSI: ffffffffffffffff RDI: 0000000000000090
RBP: 0000000000000000 R08: fffffffffffffff5 R09: 0000000000000000
R10: 00000000000260c0 R11: ffff881037fc26c0 R12: ffffffffffffffff
R13: ffff880fe4111548 R14: ffffc9000a97bc90 R15: 0000000000000001
FS: 00007f5503ced480(0000) GS:ffff880ff7200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000d0 CR3: 00000001e0459005 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
account_page_cleaned+0x15b/0x1f0
__cancel_dirty_page+0x146/0x200
truncate_cleanup_page+0x92/0xb0
truncate_inode_pages_range+0x202/0x7d0
btrfs_evict_inode+0x92/0x5a0
evict+0xc1/0x190
do_unlinkat+0x176/0x280
do_syscall_64+0x63/0x1a0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
The fix here is to make asyc_chunk->locked_page NULL everywhere but the
one async_chunk struct that's allowed to do things to the locked page.
Link: https://lore.kernel.org/linux-btrfs/c2419d01-5c84-3fb4-189e-4db519d08796@suse.com/
Fixes: 771ed689d2cd ("Btrfs: Optimize compressed writeback and reads")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Chris Mason <clm@fb.com>
[ update changelog from mail thread discussion ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a0cac0ec961f0d42828eeef196ac2246a2f07659 ]
Commit 9e0af2376434 ("Btrfs: fix task hang under heavy compressed
write") worked around the issue that a recycled work item could get a
false dependency on the original work item due to how the workqueue code
guarantees non-reentrancy. It did so by giving different work functions
to different types of work.
However, the fixes in the previous few patches are more complete, as
they prevent a work item from being recycled at all (except for a tiny
window that the kernel workqueue code handles for us). This obsoletes
the previous fix, so we don't need the unique helpers for correctness.
The only other reason to keep them would be so they show up in stack
traces, but they always seem to be optimized to a tail call, so they
don't show up anyways. So, let's just get rid of the extra indirection.
While we're here, rename normal_work_helper() to the more informative
btrfs_work_helper().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6abf57262166b4f4294667fb5206ae7ba1ba96f5 ]
Running stress-test test_2 in mtd-utils on ubi device, sometimes we can
get following oops message:
BUG: unable to handle page fault for address: ffffffff00000140
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 280a067 P4D 280a067 PUD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 60 Comm: kworker/u16:1 Kdump: loaded Not tainted 5.2.0 #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0
-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
Workqueue: writeback wb_workfn (flush-ubifs_0_0)
RIP: 0010:rb_next_postorder+0x2e/0xb0
Code: 80 db 03 01 48 85 ff 0f 84 97 00 00 00 48 8b 17 48 83 05 bc 80 db
03 01 48 83 e2 fc 0f 84 82 00 00 00 48 83 05 b2 80 db 03 01 <48> 3b 7a
10 48 89 d0 74 02 f3 c3 48 8b 52 08 48 83 05 a3 80 db 03
RSP: 0018:ffffc90000887758 EFLAGS: 00010202
RAX: ffff888129ae4700 RBX: ffff888138b08400 RCX: 0000000080800001
RDX: ffffffff00000130 RSI: 0000000080800024 RDI: ffff888138b08400
RBP: ffff888138b08400 R08: ffffea0004a6b920 R09: 0000000000000000
R10: ffffc90000887740 R11: 0000000000000001 R12: ffff888128d48000
R13: 0000000000000800 R14: 000000000000011e R15: 00000000000007c8
FS: 0000000000000000(0000) GS:ffff88813ba00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffff00000140 CR3: 000000013789d000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
destroy_old_idx+0x5d/0xa0 [ubifs]
ubifs_tnc_start_commit+0x4fe/0x1380 [ubifs]
do_commit+0x3eb/0x830 [ubifs]
ubifs_run_commit+0xdc/0x1c0 [ubifs]
Above Oops are due to the slab-out-of-bounds happened in do-while of
function layout_in_gaps indirectly called by ubifs_tnc_start_commit. In
function layout_in_gaps, there is a do-while loop placing index nodes
into the gaps created by obsolete index nodes in non-empty index LEBs
until rest index nodes can totally be placed into pre-allocated empty
LEBs. @c->gap_lebs points to a memory area(integer array) which records
LEB numbers used by 'in-the-gaps' method. Whenever a fitable index LEB
is found, corresponding lnum will be incrementally written into the
memory area pointed by @c->gap_lebs. The size
((@c->lst.idx_lebs + 1) * sizeof(int)) of memory area is allocated before
do-while loop and can not be changed in the loop. But @c->lst.idx_lebs
could be increased by function ubifs_change_lp (called by
layout_leb_in_gaps->ubifs_find_dirty_idx_leb->get_idx_gc_leb) during the
loop. So, sometimes oob happens when number of cycles in do-while loop
exceeds the original value of @c->lst.idx_lebs. See detail in
https://bugzilla.kernel.org/show_bug.cgi?id=204229.
This patch fixes oob in layout_in_gaps.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c305c6ae79e2ce20c22660ceda94f0d86d639a82 ]
KCSAN reported a data-race [1]
While we can use READ_ONCE() on the read sides,
we need to make sure hh->hh_len is written last.
[1]
BUG: KCSAN: data-race in eth_header_cache / neigh_resolve_output
write to 0xffff8880b9dedcb8 of 4 bytes by task 29760 on cpu 0:
eth_header_cache+0xa9/0xd0 net/ethernet/eth.c:247
neigh_hh_init net/core/neighbour.c:1463 [inline]
neigh_resolve_output net/core/neighbour.c:1480 [inline]
neigh_resolve_output+0x415/0x470 net/core/neighbour.c:1470
neigh_output include/net/neighbour.h:511 [inline]
ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116
__ip6_finish_output net/ipv6/ip6_output.c:142 [inline]
__ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127
ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175
dst_output include/net/dst.h:436 [inline]
NF_HOOK include/linux/netfilter.h:305 [inline]
ndisc_send_skb+0x459/0x5f0 net/ipv6/ndisc.c:505
ndisc_send_ns+0x207/0x430 net/ipv6/ndisc.c:647
rt6_probe_deferred+0x98/0xf0 net/ipv6/route.c:615
process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
worker_thread+0xa0/0x800 kernel/workqueue.c:2415
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
read to 0xffff8880b9dedcb8 of 4 bytes by task 29572 on cpu 1:
neigh_resolve_output net/core/neighbour.c:1479 [inline]
neigh_resolve_output+0x113/0x470 net/core/neighbour.c:1470
neigh_output include/net/neighbour.h:511 [inline]
ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116
__ip6_finish_output net/ipv6/ip6_output.c:142 [inline]
__ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127
ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175
dst_output include/net/dst.h:436 [inline]
NF_HOOK include/linux/netfilter.h:305 [inline]
ndisc_send_skb+0x459/0x5f0 net/ipv6/ndisc.c:505
ndisc_send_ns+0x207/0x430 net/ipv6/ndisc.c:647
rt6_probe_deferred+0x98/0xf0 net/ipv6/route.c:615
process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
worker_thread+0xa0/0x800 kernel/workqueue.c:2415
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 29572 Comm: kworker/1:4 Not tainted 5.4.0-rc6+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events rt6_probe_deferred
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5d1116d4c6af3e580f1ed0382ca5a94bd65a34cf ]
Christoph Hellwig complained about the following soft lockup warning
when running scrub after generic/175 when preemption is disabled and
slub debugging is enabled:
watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [xfs_scrub:161]
Modules linked in:
irq event stamp: 41692326
hardirqs last enabled at (41692325): [<ffffffff8232c3b7>] _raw_0
hardirqs last disabled at (41692326): [<ffffffff81001c5a>] trace0
softirqs last enabled at (41684994): [<ffffffff8260031f>] __do_e
softirqs last disabled at (41684987): [<ffffffff81127d8c>] irq_e0
CPU: 3 PID: 16189 Comm: xfs_scrub Not tainted 5.4.0-rc3+ #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.124
RIP: 0010:_raw_spin_unlock_irqrestore+0x39/0x40
Code: 89 f3 be 01 00 00 00 e8 d5 3a e5 fe 48 89 ef e8 ed 87 e5 f2
RSP: 0018:ffffc9000233f970 EFLAGS: 00000286 ORIG_RAX: ffffffffff3
RAX: ffff88813b398040 RBX: 0000000000000286 RCX: 0000000000000006
RDX: 0000000000000006 RSI: ffff88813b3988c0 RDI: ffff88813b398040
RBP: ffff888137958640 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffea00042b0c00
R13: 0000000000000001 R14: ffff88810ac32308 R15: ffff8881376fc040
FS: 00007f6113dea700(0000) GS:ffff88813bb80000(0000) knlGS:00000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6113de8ff8 CR3: 000000012f290000 CR4: 00000000000006e0
Call Trace:
free_debug_processing+0x1dd/0x240
__slab_free+0x231/0x410
kmem_cache_free+0x30e/0x360
xchk_ag_btcur_free+0x76/0xb0
xchk_ag_free+0x10/0x80
xchk_bmap_iextent_xref.isra.14+0xd9/0x120
xchk_bmap_iextent+0x187/0x210
xchk_bmap+0x2e0/0x3b0
xfs_scrub_metadata+0x2e7/0x500
xfs_ioc_scrub_metadata+0x4a/0xa0
xfs_file_ioctl+0x58a/0xcd0
do_vfs_ioctl+0xa0/0x6f0
ksys_ioctl+0x5b/0x90
__x64_sys_ioctl+0x11/0x20
do_syscall_64+0x4b/0x1a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
If preemption is disabled, all metadata buffers needed to perform the
scrub are already in memory, and there are a lot of records to check,
it's possible that the scrub thread will run for an extended period of
time without sleeping for IO or any other reason. Then the watchdog
timer or the RCU stall timeout can trigger, producing the backtrace
above.
To fix this problem, call cond_resched() from the scrub thread so that
we back out to the scheduler whenever necessary.
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 08ad9a3846fc72b047b110b36d162ffbcf298fa2 ]
As we may signal a request and take the engine->active.lock within the
signaler, the engine submission paths have to use a nested annotation on
their requests -- but we guarantee that we can never submit on the same
engine as the signaling fence.
<4>[ 723.763281] WARNING: possible circular locking dependency detected
<4>[ 723.763285] 5.3.0-g80fa0e042cdb-drmtip_379+ #1 Tainted: G U
<4>[ 723.763288] ------------------------------------------------------
<4>[ 723.763291] gem_exec_await/1388 is trying to acquire lock:
<4>[ 723.763294] ffff93a7b53221d8 (&engine->active.lock){..-.}, at: execlists_submit_request+0x2b/0x1e0 [i915]
<4>[ 723.763378]
but task is already holding lock:
<4>[ 723.763381] ffff93a7c25f6d20 (&i915_request_get(rq)->submit/1){-.-.}, at: __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[ 723.763420]
which lock already depends on the new lock.
<4>[ 723.763423]
the existing dependency chain (in reverse order) is:
<4>[ 723.763427]
-> #2 (&i915_request_get(rq)->submit/1){-.-.}:
<4>[ 723.763434] _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[ 723.763478] __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[ 723.763513] intel_engine_breadcrumbs_irq+0x3aa/0x5e0 [i915]
<4>[ 723.763600] cs_irq_handler+0x49/0x50 [i915]
<4>[ 723.763659] gen11_gt_irq_handler+0x17b/0x280 [i915]
<4>[ 723.763690] gen11_irq_handler+0x54/0xf0 [i915]
<4>[ 723.763695] __handle_irq_event_percpu+0x41/0x2d0
<4>[ 723.763699] handle_irq_event_percpu+0x2b/0x70
<4>[ 723.763702] handle_irq_event+0x2f/0x50
<4>[ 723.763706] handle_edge_irq+0xee/0x1a0
<4>[ 723.763709] do_IRQ+0x7e/0x160
<4>[ 723.763712] ret_from_intr+0x0/0x1d
<4>[ 723.763717] __slab_alloc.isra.28.constprop.33+0x4f/0x70
<4>[ 723.763720] kmem_cache_alloc+0x28d/0x2f0
<4>[ 723.763724] vm_area_dup+0x15/0x40
<4>[ 723.763727] dup_mm+0x2dd/0x550
<4>[ 723.763730] copy_process+0xf21/0x1ef0
<4>[ 723.763734] _do_fork+0x71/0x670
<4>[ 723.763737] __se_sys_clone+0x6e/0xa0
<4>[ 723.763741] do_syscall_64+0x4f/0x210
<4>[ 723.763744] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[ 723.763747]
-> #1 (&(&rq->lock)->rlock#2){-.-.}:
<4>[ 723.763752] _raw_spin_lock+0x2a/0x40
<4>[ 723.763789] __unwind_incomplete_requests+0x3eb/0x450 [i915]
<4>[ 723.763825] __execlists_submission_tasklet+0x9ec/0x1d60 [i915]
<4>[ 723.763864] execlists_submission_tasklet+0x34/0x50 [i915]
<4>[ 723.763874] tasklet_action_common.isra.5+0x47/0xb0
<4>[ 723.763878] __do_softirq+0xd8/0x4ae
<4>[ 723.763881] irq_exit+0xa9/0xc0
<4>[ 723.763883] smp_apic_timer_interrupt+0xb7/0x280
<4>[ 723.763887] apic_timer_interrupt+0xf/0x20
<4>[ 723.763892] cpuidle_enter_state+0xae/0x450
<4>[ 723.763895] cpuidle_enter+0x24/0x40
<4>[ 723.763899] do_idle+0x1e7/0x250
<4>[ 723.763902] cpu_startup_entry+0x14/0x20
<4>[ 723.763905] start_secondary+0x15f/0x1b0
<4>[ 723.763908] secondary_startup_64+0xa4/0xb0
<4>[ 723.763911]
-> #0 (&engine->active.lock){..-.}:
<4>[ 723.763916] __lock_acquire+0x15d8/0x1ea0
<4>[ 723.763919] lock_acquire+0xa6/0x1c0
<4>[ 723.763922] _raw_spin_lock_irqsave+0x33/0x50
<4>[ 723.763956] execlists_submit_request+0x2b/0x1e0 [i915]
<4>[ 723.764002] submit_notify+0xa8/0x13c [i915]
<4>[ 723.764035] __i915_sw_fence_complete+0x81/0x250 [i915]
<4>[ 723.764054] i915_sw_fence_wake+0x51/0x64 [i915]
<4>[ 723.764054] __i915_sw_fence_complete+0x1ee/0x250 [i915]
<4>[ 723.764054] dma_i915_sw_fence_wake_timer+0x14/0x20 [i915]
<4>[ 723.764054] dma_fence_signal_locked+0x9e/0x1c0
<4>[ 723.764054] dma_fence_signal+0x1f/0x40
<4>[ 723.764054] vgem_fence_signal_ioctl+0x67/0xc0 [vgem]
<4>[ 723.764054] drm_ioctl_kernel+0x83/0xf0
<4>[ 723.764054] drm_ioctl+0x2f3/0x3b0
<4>[ 723.764054] do_vfs_ioctl+0xa0/0x6f0
<4>[ 723.764054] ksys_ioctl+0x35/0x60
<4>[ 723.764054] __x64_sys_ioctl+0x11/0x20
<4>[ 723.764054] do_syscall_64+0x4f/0x210
<4>[ 723.764054] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[ 723.764054]
other info that might help us debug this:
<4>[ 723.764054] Chain exists of:
&engine->active.lock --> &(&rq->lock)->rlock#2 --> &i915_request_get(rq)->submit/1
<4>[ 723.764054] Possible unsafe locking scenario:
<4>[ 723.764054] CPU0 CPU1
<4>[ 723.764054] ---- ----
<4>[ 723.764054] lock(&i915_request_get(rq)->submit/1);
<4>[ 723.764054] lock(&(&rq->lock)->rlock#2);
<4>[ 723.764054] lock(&i915_request_get(rq)->submit/1);
<4>[ 723.764054] lock(&engine->active.lock);
<4>[ 723.764054]
*** DEADLOCK ***
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111862
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004194758.19679-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cd486e627e67ee9ab66914d36d3127ef057cc010 ]
Sometimes the hardware will push small packets that trigger a WARN_ON
in mac80211. Discard them early to avoid this issue.
This patch ports 2 patches from ath9k to ath9k_htc.
commit 3c0efb745a172bfe96459e20cbd37b0c945d5f8d "ath9k: discard
undersized packets".
commit df5c4150501ee7e86383be88f6490d970adcf157 "ath9k: correctly
handle short radar pulses".
[ 112.835889] ------------[ cut here ]------------
[ 112.835971] WARNING: CPU: 5 PID: 0 at net/mac80211/rx.c:804 ieee80211_rx_napi+0xaac/0xb40 [mac80211]
[ 112.835973] Modules linked in: ath9k_htc ath9k_common ath9k_hw ath mac80211 cfg80211 libarc4 nouveau snd_hda_codec_hdmi intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_hda_codec video snd_hda_core ttm snd_hwdep drm_kms_helper snd_pcm crct10dif_pclmul snd_seq_midi drm snd_seq_midi_event crc32_pclmul snd_rawmidi ghash_clmulni_intel snd_seq aesni_intel aes_x86_64 crypto_simd cryptd snd_seq_device glue_helper snd_timer sch_fq_codel i2c_algo_bit fb_sys_fops snd input_leds syscopyarea sysfillrect sysimgblt intel_cstate mei_me intel_rapl_perf soundcore mxm_wmi lpc_ich mei kvm_intel kvm mac_hid irqbypass parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear e1000e ahci libahci wmi
[ 112.836022] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.3.0-wt #1
[ 112.836023] Hardware name: MouseComputer Co.,Ltd. X99-S01/X99-S01, BIOS 1.0C-W7 04/01/2015
[ 112.836056] RIP: 0010:ieee80211_rx_napi+0xaac/0xb40 [mac80211]
[ 112.836059] Code: 00 00 66 41 89 86 b0 00 00 00 e9 c8 fa ff ff 4c 89 b5 40 ff ff ff 49 89 c6 e9 c9 fa ff ff 48 c7 c7 e0 a2 a5 c0 e8 47 41 b0 e9 <0f> 0b 48 89 df e8 5a 94 2d ea e9 02 f9 ff ff 41 39 c1 44 89 85 60
[ 112.836060] RSP: 0018:ffffaa6180220da8 EFLAGS: 00010286
[ 112.836062] RAX: 0000000000000024 RBX: ffff909a20eeda00 RCX: 0000000000000000
[ 112.836064] RDX: 0000000000000000 RSI: ffff909a2f957448 RDI: ffff909a2f957448
[ 112.836065] RBP: ffffaa6180220e78 R08: 00000000000006e9 R09: 0000000000000004
[ 112.836066] R10: 000000000000000a R11: 0000000000000001 R12: 0000000000000000
[ 112.836068] R13: ffff909a261a47a0 R14: 0000000000000000 R15: 0000000000000004
[ 112.836070] FS: 0000000000000000(0000) GS:ffff909a2f940000(0000) knlGS:0000000000000000
[ 112.836071] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 112.836073] CR2: 00007f4e3ffffa08 CR3: 00000001afc0a006 CR4: 00000000001606e0
[ 112.836074] Call Trace:
[ 112.836076] <IRQ>
[ 112.836083] ? finish_td+0xb3/0xf0
[ 112.836092] ? ath9k_rx_prepare.isra.11+0x22f/0x2a0 [ath9k_htc]
[ 112.836099] ath9k_rx_tasklet+0x10b/0x1d0 [ath9k_htc]
[ 112.836105] tasklet_action_common.isra.22+0x63/0x110
[ 112.836108] tasklet_action+0x22/0x30
[ 112.836115] __do_softirq+0xe4/0x2da
[ 112.836118] irq_exit+0xae/0xb0
[ 112.836121] do_IRQ+0x86/0xe0
[ 112.836125] common_interrupt+0xf/0xf
[ 112.836126] </IRQ>
[ 112.836130] RIP: 0010:cpuidle_enter_state+0xa9/0x440
[ 112.836133] Code: 3d bc 20 38 55 e8 f7 1d 84 ff 49 89 c7 0f 1f 44 00 00 31 ff e8 28 29 84 ff 80 7d d3 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ed 0f 89 ff 01 00 00 41 c7 44 24 10 00 00 00 00 48 83 c4 18
[ 112.836134] RSP: 0018:ffffaa61800e3e48 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
[ 112.836136] RAX: ffff909a2f96b340 RBX: ffffffffabb58200 RCX: 000000000000001f
[ 112.836137] RDX: 0000001a458adc5d RSI: 0000000026c9b581 RDI: 0000000000000000
[ 112.836139] RBP: ffffaa61800e3e88 R08: 0000000000000002 R09: 000000000002abc0
[ 112.836140] R10: ffffaa61800e3e18 R11: 000000000000002d R12: ffffca617fb40b00
[ 112.836141] R13: 0000000000000002 R14: ffffffffabb582d8 R15: 0000001a458adc5d
[ 112.836145] ? cpuidle_enter_state+0x98/0x440
[ 112.836149] ? menu_select+0x370/0x600
[ 112.836151] cpuidle_enter+0x2e/0x40
[ 112.836154] call_cpuidle+0x23/0x40
[ 112.836156] do_idle+0x204/0x280
[ 112.836159] cpu_startup_entry+0x1d/0x20
[ 112.836164] start_secondary+0x167/0x1c0
[ 112.836169] secondary_startup_64+0xa4/0xb0
[ 112.836173] ---[ end trace 9f4cd18479cc5ae5 ]---
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e01fddc19d215f6ad397894ec2a851d99bf154e2 ]
rs_datalen is be16 so we need to convert it before printing.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6b2daec19094a90435abe67d16fb43b1a5527254 upstream.
Unlike FICLONE, all of those take a pointer argument; they do need
compat_ptr() applied to arg.
Fixes: d79bdd52d8be ("vfs: wire up compat ioctl for CLONE/CLONE_RANGE")
Fixes: 54dbc1517237 ("vfs: hoist the btrfs deduplication ioctl to the vfs")
Fixes: ceac204e1da9 ("fs: make fiemap work from compat_ioctl")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 69738cfdfa7032f45d9e7462d24490e61cf163dd upstream.
According to the comment in the code and commit log, some apps
expect atime >= mtime; but the introduced code results in
atime==mtime. Fix the comparison to guard against atime<mtime.
Fixes: 9b9c5bea0b96 ("cifs: do not return atime less than mtime")
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: stfrench@microsoft.com
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit df3df923b31d298c3d3653a0380202b9f2df9864 upstream.
We don't care about module aliasing validation in
cifs_compose_mount_options(..., is_smb3) when finding the root SMB
session of an DFS namespace in order to refresh DFS referral cache.
The following issue has been observed when mounting with '-t smb3' and
then specifying 'vers=2.0':
...
Nov 08 15:27:08 tw kernel: address conversion returned 0 for FS0.WIN.LOCAL
Nov 08 15:27:08 tw kernel: [kworke] ==> dns_query((null),FS0.WIN.LOCAL,13,(null))
Nov 08 15:27:08 tw kernel: [kworke] call request_key(,FS0.WIN.LOCAL,)
Nov 08 15:27:08 tw kernel: [kworke] ==> dns_resolver_cmp(FS0.WIN.LOCAL,FS0.WIN.LOCAL)
Nov 08 15:27:08 tw kernel: [kworke] <== dns_resolver_cmp() = 1
Nov 08 15:27:08 tw kernel: [kworke] <== dns_query() = 13
Nov 08 15:27:08 tw kernel: fs/cifs/dns_resolve.c: dns_resolve_server_name_to_ip: resolved: FS0.WIN.LOCAL to 192.168.30.26
===> Nov 08 15:27:08 tw kernel: CIFS VFS: vers=2.0 not permitted when mounting with smb3
Nov 08 15:27:08 tw kernel: fs/cifs/dfs_cache.c: CIFS VFS: leaving refresh_tcon (xid = 26) rc = -22
...
Fixes: 5072010ccf05 ("cifs: Fix DFS cache refresher for DFS links")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0e4f7f920a5c6bfe5e851e989f27b35a0cc7fb7e upstream.
As the commit 677fe555cbfb ("serial: imx: Fix recursive locking bug")
has mentioned the uart driver might cause recursive locking between
normal printing and the kernel debugging facilities (e.g. sysrq and
oops). In the commit it gave out suggestion for fixing recursive
locking issue: "The solution is to avoid locking in the sysrq case
and trylock in the oops_in_progress case."
This patch follows the suggestion (also used the exactly same code with
other serial drivers, e.g. amba-pl011.c) to fix the recursive locking
issue, this can avoid stuck caused by deadlock and print out log for
sysrq and oops.
Fixes: 04896a77a97b ("msm_serial: serial driver for MSM7K onboard serial peripheral.")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191127141544.4277-2-leo.yan@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b049e03ca57f238e74a79e44ffc85904db465e72 upstream.
As platform_get_irq() now prints an error when the interrupt does not
exist, a scary warning may be printed for an optional interrupt:
phy_rcar_gen3_usb2 ee0a0200.usb-phy: IRQ index 0 not found
Fix this by calling platform_get_irq_optional() instead.
Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 72c9b5f6f75fbc6c47e0a2d02bc3838a2a47c90a upstream.
usb_otg bus needs to get initialize from the u-boot to be configured
to used as power source to SBC or usb otg port will get configured
as host device. Right now this support is missing in the u-boot and
phy driver so to avoid power failed warning, we would disable this
feature until proper fix is found.
[ 2.716048] phy phy-c0000000.phy.0: USB ID detect failed!
[ 2.720186] phy phy-c0000000.phy.0: phy poweron failed --> -22
[ 2.726001] ------------[ cut here ]------------
[ 2.730583] WARNING: CPU: 0 PID: 12 at drivers/regulator/core.c:2039 _regulator_put+0x3c/0xe8
[ 2.738983] Modules linked in:
[ 2.742005] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.2.9-1-ARCH #1
[ 2.748643] Hardware name: Hardkernel ODROID-C2 (DT)
[ 2.753566] Workqueue: events deferred_probe_work_func
[ 2.758649] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 2.763394] pc : _regulator_put+0x3c/0xe8
[ 2.767361] lr : _regulator_put+0x3c/0xe8
[ 2.771326] sp : ffff000011aa3a50
[ 2.774604] x29: ffff000011aa3a50 x28: ffff80007ed1b600
[ 2.779865] x27: ffff80007f7036a8 x26: ffff80007f7036a8
[ 2.785126] x25: 0000000000000000 x24: ffff000011a44458
[ 2.790387] x23: ffff000011344218 x22: 0000000000000009
[ 2.795649] x21: ffff000011aa3b68 x20: ffff80007ed1b500
[ 2.800910] x19: ffff80007ed1b500 x18: 0000000000000010
[ 2.806171] x17: 000000005be5943c x16: 00000000f1c73b29
[ 2.811432] x15: ffffffffffffffff x14: ffff0000117396c8
[ 2.816694] x13: ffff000091aa37a7 x12: ffff000011aa37af
[ 2.821955] x11: ffff000011763000 x10: ffff000011aa3730
[ 2.827216] x9 : 00000000ffffffd0 x8 : ffff000010871760
[ 2.832477] x7 : 00000000000000d0 x6 : ffff0000119d151b
[ 2.837739] x5 : 000000000000000f x4 : 0000000000000000
[ 2.843000] x3 : 0000000000000000 x2 : 38104b2678c20100
[ 2.848261] x1 : 0000000000000000 x0 : 0000000000000024
[ 2.853523] Call trace:
[ 2.855940] _regulator_put+0x3c/0xe8
[ 2.859562] regulator_put+0x34/0x48
[ 2.863098] regulator_bulk_free+0x40/0x58
[ 2.867153] devm_regulator_bulk_release+0x24/0x30
[ 2.871896] release_nodes+0x1f0/0x2e0
[ 2.875604] devres_release_all+0x64/0xa4
[ 2.879571] really_probe+0x1c8/0x3e0
[ 2.883194] driver_probe_device+0xe4/0x138
[ 2.887334] __device_attach_driver+0x90/0x110
[ 2.891733] bus_for_each_drv+0x8c/0xd8
[ 2.895527] __device_attach+0xdc/0x160
[ 2.899322] device_initial_probe+0x24/0x30
[ 2.903463] bus_probe_device+0x9c/0xa8
[ 2.907258] deferred_probe_work_func+0xa0/0xf0
[ 2.911745] process_one_work+0x1b4/0x408
[ 2.915711] worker_thread+0x54/0x4b8
[ 2.919334] kthread+0x12c/0x130
[ 2.922526] ret_from_fork+0x10/0x1c
[ 2.926060] ---[ end trace 51a68f4c0035d6c0 ]---
[ 2.930691] ------------[ cut here ]------------
[ 2.935242] WARNING: CPU: 0 PID: 12 at drivers/regulator/core.c:2039 _regulator_put+0x3c/0xe8
[ 2.943653] Modules linked in:
[ 2.946675] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G W 5.2.9-1-ARCH #1
[ 2.954694] Hardware name: Hardkernel ODROID-C2 (DT)
[ 2.959613] Workqueue: events deferred_probe_work_func
[ 2.964700] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 2.969445] pc : _regulator_put+0x3c/0xe8
[ 2.973412] lr : _regulator_put+0x3c/0xe8
[ 2.977377] sp : ffff000011aa3a50
[ 2.980655] x29: ffff000011aa3a50 x28: ffff80007ed1b600
[ 2.985916] x27: ffff80007f7036a8 x26: ffff80007f7036a8
[ 2.991177] x25: 0000000000000000 x24: ffff000011a44458
[ 2.996439] x23: ffff000011344218 x22: 0000000000000009
[ 3.001700] x21: ffff000011aa3b68 x20: ffff80007ed1bd00
[ 3.006961] x19: ffff80007ed1bd00 x18: 0000000000000010
[ 3.012222] x17: 000000005be5943c x16: 00000000f1c73b29
[ 3.017484] x15: ffffffffffffffff x14: ffff0000117396c8
[ 3.022745] x13: ffff000091aa37a7 x12: ffff000011aa37af
[ 3.028006] x11: ffff000011763000 x10: ffff000011aa3730
[ 3.033267] x9 : 00000000ffffffd0 x8 : ffff000010871760
[ 3.038528] x7 : 00000000000000fd x6 : ffff0000119d151b
[ 3.043790] x5 : 000000000000000f x4 : 0000000000000000
[ 3.049051] x3 : 0000000000000000 x2 : 38104b2678c20100
[ 3.054312] x1 : 0000000000000000 x0 : 0000000000000024
[ 3.059574] Call trace:
[ 3.061991] _regulator_put+0x3c/0xe8
[ 3.065613] regulator_put+0x34/0x48
[ 3.069149] regulator_bulk_free+0x40/0x58
[ 3.073203] devm_regulator_bulk_release+0x24/0x30
[ 3.077947] release_nodes+0x1f0/0x2e0
[ 3.081655] devres_release_all+0x64/0xa4
[ 3.085622] really_probe+0x1c8/0x3e0
[ 3.089245] driver_probe_device+0xe4/0x138
[ 3.093385] __device_attach_driver+0x90/0x110
[ 3.097784] bus_for_each_drv+0x8c/0xd8
[ 3.101578] __device_attach+0xdc/0x160
[ 3.105373] device_initial_probe+0x24/0x30
[ 3.109514] bus_probe_device+0x9c/0xa8
[ 3.113309] deferred_probe_work_func+0xa0/0xf0
[ 3.117796] process_one_work+0x1b4/0x408
[ 3.121762] worker_thread+0x54/0x4b8
[ 3.125384] kthread+0x12c/0x130
[ 3.128575] ret_from_fork+0x10/0x1c
[ 3.132110] ---[ end trace 51a68f4c0035d6c1 ]---
[ 3.136753] dwc2: probe of c9000000.usb failed with error -22
Fixes: 5a0803bd5ae2 ("ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes")
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 830dbce7c76ea529decac7d23b808c1e7da3d891 upstream.
The documented compatible value for R-Car H3 is
"renesas,r8a7795-rcar-usb2-clock-sel", not
"renesas,r8a77950-rcar-usb2-clock-sel".
Fixes: 311accb64570db45 ("clk: renesas: rcar-usb2-clock-sel: Add R-Car USB 2.0 clock selector PHY")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191016145650.30003-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2289adbfa559050d2a38bcd9caac1c18b800e928 upstream.
In af9005_identify_state when returning -EIO the allocated buffer should
be released. Replace the "return -EIO" with assignment into ret and move
deb_info() under a check.
Fixes: af4e067e1dcf ("V4L/DVB (5625): Add support for the AF9005 demodulator from Afatech")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 99c4f70df3a6446c56ca817c2d0f9c12d85d4e7c upstream.
The USB regulator was removed for AB8500 in
commit 41a06aa738ad ("regulator: ab8500: Remove USB regulator").
It was then added for AB8505 in
commit 547f384f33db ("regulator: ab8500: add support for ab8505").
However, there was never an entry added for it in
ab8505_regulator_match. This causes all regulators after it
to be initialized with the wrong device tree data, eventually
leading to an out-of-bounds array read.
Given that it is not used anywhere in the kernel, it seems
likely that similar arguments against supporting it exist for
AB8505 (it is controlled by hardware).
Therefore, simply remove it like for AB8500 instead of adding
an entry in ab8505_regulator_match.
Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505")
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191106173125.14496-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74a96b51a36de4d86660fbc56b05d86668162d6b upstream.
An earlier commit hard coded a return 0 to function flexcop_usb_i2c_req
even though the an -EIO was intended to be returned in the case where
ret != buflen. Fix this by replacing the return 0 with the return of
ret to return the error return code.
Addresses-Coverity: ("Unused value")
Fixes: b430eaba0be5 ("[media] flexcop-usb: don't use stack for DMA")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 388a2772979b625042524d8b91280616ab4ff5ee upstream.
Fixes: 33344e2111a3 ("arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c6d575574ec87dbccf7af20ef9dc0df02614069 upstream.
Fixes: dd5297cc8b8b ("arm64: dts: meson-gxl-s905x-khadas-vim enable Bluetooth")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d088337c38a5cd8f0230fbf2d514ff7672f9d0d3 upstream.
In the implementation of hci_connect_le_scan() when conn is added via
hci_conn_add(), if hci_explicit_conn_params_set() fails the allocated
memory for conn is leaked. Use hci_conn_del() to release it.
Fixes: f75113a26008 ("Bluetooth: add hci_connect_le_scan")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit df66499a1fab340c167250a5743931dc50d5f0fa upstream.
We used to take a lock in amp_physical_cfm() but then we moved it to
the caller function. Unfortunately the unlock on this error path was
overlooked so it leads to a double unlock.
Fixes: a514b17fab51 ("Bluetooth: Refactor locking in amp_physical_cfm")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3d44a6fd0775e6215e836423e27f8eedf8c871ea upstream.
If setup() fails a reference for runtime PM has already
been taken. Proper use of the error handling in btusb_open()is needed.
You cannot just return.
Fixes: ace31982585a3 ("Bluetooth: btusb: Add setup callback for chip init on USB")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 91a063c956084fb21cf2523bce6892514e3f1799 upstream.
These slice routines are called from the SLB miss handler, which can
lead to warnings from the IRQ code, because we have not reconciled the
IRQ state properly:
WARNING: CPU: 72 PID: 30150 at arch/powerpc/kernel/irq.c:258 arch_local_irq_restore.part.0+0xcc/0x100
Modules linked in:
CPU: 72 PID: 30150 Comm: ftracetest Not tainted 5.5.0-rc2-gcc9x-g7e0165b2f1a9 #1
NIP: c00000000001d83c LR: c00000000029ab90 CTR: c00000000026cf90
REGS: c0000007eee3b960 TRAP: 0700 Not tainted (5.5.0-rc2-gcc9x-g7e0165b2f1a9)
MSR: 8000000000021033 <SF,ME,IR,DR,RI,LE> CR: 22242844 XER: 20000000
CFAR: c00000000001d780 IRQMASK: 0
...
NIP arch_local_irq_restore.part.0+0xcc/0x100
LR trace_graph_entry+0x270/0x340
Call Trace:
trace_graph_entry+0x254/0x340 (unreliable)
function_graph_enter+0xe4/0x1a0
prepare_ftrace_return+0xa0/0x130
ftrace_graph_caller+0x44/0x94 # (get_slice_psize())
slb_allocate_user+0x7c/0x100
do_slb_fault+0xf8/0x300
instruction_access_slb_common+0x140/0x180
Fixes: 48e7b7695745 ("powerpc/64s/hash: Convert SLB miss handlers to C")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191221121337.4894-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f40ddaa059fdfb472e3aeb733c6220d8e0633a47 upstream.
A copy-paste error was introduced when bitmasks were converted to
macros, incorrectly setting the enable bitmask for ELDO2 to the one
for ELDO1 for the AXP22x units.
Fix it by using the correct macro.
On affected boards, ELDO1 and/or ELDO2 are used to power the camera,
which is currently unsupported.
Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20191218044720.21990-1-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9cd34efbd3012171c102910ce17ee632a3cccb44 upstream.
Rx threshold means the value to inform the receiver when the number of words
in Rx FIFO is equal to or more than the value. Similarly, Tx threshold means
the value to inform the sender when the number of words in Tx FIFO is equal
to or less than the value. The controller triggers the driver to start
the transfer.
In case of Rx, the driver wants to detect that the specified number of words
N are in Rx FIFO, so the value of Rx threshold should be N. In case of Tx,
the driver wants to detect that the same number of spaces as Rx are in
Tx FIFO, so the value of Tx threshold should be (FIFO size - N).
For example, in order for the driver to receive at least 3 words from
Rx FIFO, set 3 to Rx threshold.
+-+-+-+-+-+-+-+-+
| | | | | |*|*|*|
+-+-+-+-+-+-+-+-+
In order for the driver to send at least 3 words to Tx FIFO, because
it needs at least 3 spaces, set 8(FIFO size) - 3 = 5 to Tx threshold.
+-+-+-+-+-+-+-+-+
|*|*|*|*|*| | | |
+-+-+-+-+-+-+-+-+
This adds new function uniphier_spi_set_fifo_threshold() to set
threshold value to the register.
And more, FIFO counts by 'words', so this renames 'fill_bytes' with
'fill_words', and fixes the calculation using bytes_per_words.
Fixes: 37ffab817098 ("spi: uniphier: introduce polling mode")
Cc: Keiji Hayashibara <hayashibara.keiji@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1577149107-30670-2-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6f1ff76154b8b36033efcbf6453a71a3d28f52cd upstream.
The .set_ramp_delay should be for bd70528_buck_ops only.
Setting .set_ramp_delay for for bd70528_ldo_ops causes problem because
BD70528_MASK_BUCK_RAMP (0x10) overlaps with BD70528_MASK_LDO_VOLT (0x1f).
So setting ramp_delay for LDOs may change the voltage output, fix it.
Fixes: 99ea37bd1e7d ("regulator: bd70528: Support ROHM BD70528 regulator block")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20200101022406.15176-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 71dd2fe5dec171b34b71603a81bb46c24c498fde upstream.
Current code set incorrect bits when set ramp_delay for AXP20X_DCDC2,
fix it.
Fixes: d29f54df8b16 ("regulator: axp20x: add support for set_ramp_delay for AXP209")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20191221081049.32490-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9a6c274ac1c4346f5384f2290caeb42dc674c471 upstream.
If TQMX86_WDT is y and WATCHDOG_CORE is m, building fails:
drivers/watchdog/tqmx86_wdt.o: In function `tqmx86_wdt_probe':
tqmx86_wdt.c:(.text+0x46e): undefined reference to `watchdog_init_timeout'
tqmx86_wdt.c:(.text+0x4e0): undefined reference to `devm_watchdog_register_device'
Select WATCHDOG_CORE to fix this.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e3c21e088f89 ("watchdog: tqmx86: Add watchdog driver for the IO controller")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191206124259.25880-1-yuehaibing@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1148f9adbe71415836a18a36c1b4ece999ab0973 upstream.
proc_dointvec_minmax_bpf_restricted() has been firstly introduced
in commit 2e4a30983b0f ("bpf: restrict access to core bpf sysctls")
under CONFIG_HAVE_EBPF_JIT. Then, this ifdef has been removed in
ede95a63b5e8 ("bpf: add bpf_jit_limit knob to restrict unpriv
allocations"), because a new sysctl, bpf_jit_limit, made use of it.
Finally, this parameter has become long instead of integer with
fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
and thus, a new proc_dolongvec_minmax_bpf_restricted() has been
added.
With this last change, we got back to that
proc_dointvec_minmax_bpf_restricted() is used only under
CONFIG_HAVE_EBPF_JIT, but the corresponding ifdef has not been
brought back.
So, in configurations like CONFIG_BPF_JIT=y && CONFIG_HAVE_EBPF_JIT=n
since v4.20 we have:
CC net/core/sysctl_net_core.o
net/core/sysctl_net_core.c:292:1: warning: ‘proc_dointvec_minmax_bpf_restricted’ defined but not used [-Wunused-function]
292 | proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Suppress this by guarding it with CONFIG_HAVE_EBPF_JIT again.
Fixes: fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191218091821.7080-1-alobakin@dlink.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0b9173f4688dfa7c5d723426be1d979c24ce3d51 upstream.
Bridge packets that are forwarded have skb->dst == NULL and get
dropped by the check introduced by
b60a77386b1d4868f72f6353d35dabe5fbe981f2 (net: make skb_dst_force
return true when dst is refcounted).
To fix this we check skb_dst() before skb_dst_force(), so we don't
drop skb packet with dst == NULL. This holds also for skb at the
PRE_ROUTING hook so we remove the second check.
Fixes: b60a77386b1d ("net: make skb_dst_force return true when dst is refcounted")
Signed-off-by: Marco Oliverio <marco.oliverio@tanaza.com>
Signed-off-by: Rocco Folino <rocco.folino@tanaza.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e8796c6c69d129420ee94a1906b18d86b84644d4 upstream.
The CONNECT X300 uses the PMC clock for on-board components and gets
stuck during boot if the clock is disabled. Therefore, add this
device to the critical systems list.
Tested on CONNECT X300.
Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Michael Haener <michael.haener@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 69ffe5960df16938bccfe1b65382af0b3de51265 upstream.
Commit 5b094d6dac04 ("xfs: fix multi-AG deadlock in xfs_bunmapi") added
a check in __xfs_bunmapi() to stop early if we would touch multiple AGs
in the wrong order. However, this check isn't applicable for realtime
files. In most cases, it just makes us do unnecessary commits. However,
without the fix from the previous commit ("xfs: fix realtime file data
space leak"), if the last and second-to-last extents also happen to have
different "AG numbers", then the break actually causes __xfs_bunmapi()
to return without making any progress, which sends
xfs_itruncate_extents_flags() into an infinite loop.
Fixes: 5b094d6dac04 ("xfs: fix multi-AG deadlock in xfs_bunmapi")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8305e90a894f82c278c17e51a28459deee78b263 upstream.
If device_register() fails, both put_device() and kfree() are called,
ending with a double free of the scmi_dev.
Calling kfree() is needed only when a failure happens between the
allocation of the scmi_dev and its registration, so move it to there
and remove it from the error flow.
Fixes: 46edb8d1322c ("firmware: arm_scmi: provide the mandatory device release callback")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 84a1f5b1cc6fd7f6cd99fc5630c36f631b19fa60 upstream.
We used to skip reconnects on all SMB2_IOCTL commands due to SMB3+
FSCTL_VALIDATE_NEGOTIATE_INFO - which made sense since we're still
establishing a SMB session.
However, when refresh_cache_worker() calls smb2_get_dfs_refer() and
we're under reconnect, SMB2_ioctl() will not be able to get a proper
status error (e.g. -EHOSTDOWN in case we failed to reconnect) but an
-EAGAIN from cifs_send_recv() thus looping forever in
refresh_cache_worker().
Fixes: e99c63e4d86d ("SMB3: Fix deadlock in validate negotiate hits reconnect")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Suggested-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 637392a8506a3a7dd24ab9094a14f7522adb73b4 upstream.
No changeset entries are created for #address-cells and #size-cells
properties, but the duplicated properties are never freed. This
results in a memory leak which is detected by kmemleak:
unreferenced object 0x85887180 (size 64):
backtrace:
kmem_cache_alloc_trace+0x1fb/0x1fc
__of_prop_dup+0x25/0x7c
add_changeset_property+0x17f/0x370
build_changeset_next_level+0x29/0x20c
of_overlay_fdt_apply+0x32b/0x6b4
...
Fixes: 6f75118800ac ("of: overlay: validate overlay properties #address-cells and #size-cells")
Reported-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Greg Kroah-Hartman
Aneesh Kumar K.V
Waiman Long
Taehee Yoo
Eric Dumazet
Alexander Shishkin
Ard Biesheuvel
Julien Grall
SeongJae Park
Ilya Leoshkevich
Heiko Carstens
Chris Mason
Omar Sandoval
Zhihao Cheng
Darrick J. Wong
Chris Wilson
Masashi Honma
Al Viro
Deepa Dinamani
Paulo Alcantara (SUSE)
Leo Yan
Geert Uytterhoeven
Anand Moon
Navid Emamdoost
Stephan Gerhold
Colin Ian King
Christian Hewitt
Dan Carpenter
Oliver Neukum
Michael Ellerman
Chen-Yu Tsai
Kunihiko Hayashi
Axel Lin
YueHaibing
Alexander Lobakin
Marco Oliverio
Michael Haener
Wen Yang
Frank Rowand