summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2020-09-23USB: UAS: fix disconnect by unplugging a hubOliver Neukum
commit 325b008723b2dd31de020e85ab9d2e9aa4637d35 upstream. The SCSI layer can go into an ugly loop if you ignore that a device is gone. You need to report an error in the command rather than in the return value of the queue method. We need to specifically check for ENODEV. The issue goes back to the introduction of the driver. Fixes: 115bb1ffa54c3 ("USB: Add UAS driver") Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200916094026.30085-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-23USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebookPenghao
commit bcea6dafeeef7d1a6a8320a249aabf981d63b881 upstream. Add a USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for the BYD zhaoxin notebook. This notebook come with usb touchpad. And we would like to disable touchpad wakeup on this notebook by default. Signed-off-by: Penghao <penghao@uniontech.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200907023026.28189-1-penghao@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-23drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata()Yu Kuai
[ Upstream commit 0680a622318b8d657323b94082f4b9a44038dfee ] if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have a corresponding put_device(). Thus add jump target to fix the exception handling for this function implementation. Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23drm/mediatek: Add exception handing in mtk_drm_probe() if component init failYu Kuai
[ Upstream commit 64c194c00789889b0f9454f583712f079ba414ee ] mtk_ddp_comp_init() is called in a loop in mtk_drm_probe(), if it fail, previous successive init component is not proccessed. Thus uninitialize valid component and put their device if component init failed. Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23MIPS: SNI: Fix spurious interruptsThomas Bogendoerfer
[ Upstream commit b959b97860d0fee8c8f6a3e641d3c2ad76eab6be ] On A20R machines the interrupt pending bits in cause register need to be updated by requesting the chipset to do it. This needs to be done to find the interrupt cause and after interrupt service. In commit 0b888c7f3a03 ("MIPS: SNI: Convert to new irq_chip functions") the function to do after service update got lost, which caused spurious interrupts. Fixes: 0b888c7f3a03 ("MIPS: SNI: Convert to new irq_chip functions") Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23fbcon: Fix user font detection test at fbcon_resize().Tetsuo Handa
[ Upstream commit ec0972adecb391a8d8650832263a4790f3bfb4df ] syzbot is reporting OOB read at fbcon_resize() [1], for commit 39b3cffb8cf31117 ("fbcon: prevent user font height or width change from causing potential out-of-bounds access") is by error using registered_fb[con2fb_map[vc->vc_num]]->fbcon_par->p->userfont (which was set to non-zero) instead of fb_display[vc->vc_num].userfont (which remains zero for that display). We could remove tricky userfont flag [2], for we can determine it by comparing address of the font data and addresses of built-in font data. But since that commit is failing to fix the original OOB read [3], this patch keeps the change minimal in case we decide to revert altogether. [1] https://syzkaller.appspot.com/bug?id=ebcbbb6576958a496500fee9cf7aa83ea00b5920 [2] https://syzkaller.appspot.com/text?tag=Patch&x=14030853900000 [3] https://syzkaller.appspot.com/bug?id=6fba8c186d97cf1011ab17660e633b1cc4e080c9 Reported-by: syzbot <syzbot+b38b1ef6edf0c74a8d97@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 39b3cffb8cf31117 ("fbcon: prevent user font height or width change from causing potential out-of-bounds access") Cc: George Kennedy <george.kennedy@oracle.com> Link: https://lore.kernel.org/r/f6e3e611-8704-1263-d163-f52c906a4f06@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23perf test: Free formats for perf pmu parse testNamhyung Kim
[ Upstream commit d26383dcb2b4b8629fde05270b4e3633be9e3d4b ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f956ec4a1 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23MIPS: SNI: Fix MIPS_L1_CACHE_SHIFTThomas Bogendoerfer
[ Upstream commit 564c836fd945a94b5dd46597d6b7adb464092650 ] Commit 930beb5ac09a ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>") forgot to select the correct MIPS_L1_CACHE_SHIFT for SNI RM. This breaks non coherent DMA because of a wrong allocation alignment. Fixes: 930beb5ac09a ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>") Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23perf test: Fix the "signal" test inline assemblyJiri Olsa
[ Upstream commit 8a39e8c4d9baf65d88f66d49ac684df381e30055 ] When compiling with DEBUG=1 on Fedora 32 I'm getting crash for 'perf test signal': Program received signal SIGSEGV, Segmentation fault. 0x0000000000c68548 in __test_function () (gdb) bt #0 0x0000000000c68548 in __test_function () #1 0x00000000004d62e9 in test_function () at tests/bp_signal.c:61 #2 0x00000000004d689a in test__bp_signal (test=0xa8e280 <generic_ ... #3 0x00000000004b7d49 in run_test (test=0xa8e280 <generic_tests+1 ... #4 0x00000000004b7e7f in test_and_print (t=0xa8e280 <generic_test ... #5 0x00000000004b8927 in __cmd_test (argc=1, argv=0x7fffffffdce0, ... ... It's caused by the symbol __test_function being in the ".bss" section: $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [28] .bss NOBITS 0000000000c356a0 008346a0 00000000000511f8 0000000000000000 WA 0 0 32 $ nm perf | grep __test_function 0000000000c68548 B __test_function I guess most of the time we're just lucky the inline asm ended up in the ".text" section, so making it specific explicit with push and pop section clauses. $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [13] .text PROGBITS 0000000000431240 00031240 0000000000306faa 0000000000000000 AX 0 0 16 $ nm perf | grep __test_function 00000000004d62c8 T __test_function Committer testing: $ readelf -wi ~/bin/perf | grep producer -m1 <c> DW_AT_producer : (indirect string, offset: 0x254a): GNU C99 10.2.1 20200723 (Red Hat 10.2.1-1) -mtune=generic -march=x86-64 -ggdb3 -std=gnu99 -fno-omit-frame-pointer -funwind-tables -fstack-protector-all ^^^^^ ^^^^^ ^^^^^ $ Before: $ perf test signal 20: Breakpoint overflow signal handler : FAILED! $ After: $ perf test signal 20: Breakpoint overflow signal handler : Ok $ Fixes: 8fd34e1cce18 ("perf test: Improve bp_signal") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lore.kernel.org/lkml/20200911130005.1842138-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23Drivers: hv: vmbus: Add timeout to vmbus_wait_for_unloadMichael Kelley
[ Upstream commit 911e1987efc8f3e6445955fbae7f54b428b92bd3 ] vmbus_wait_for_unload() looks for a CHANNELMSG_UNLOAD_RESPONSE message coming from Hyper-V. But if the message isn't found for some reason, the panic path gets hung forever. Add a timeout of 10 seconds to prevent this. Fixes: 415719160de3 ("Drivers: hv: vmbus: avoid scheduling in interrupt context in vmbus_initiate_unload()") Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/1600026449-23651-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23ASoC: qcom: Set card->owner to avoid warningsStephan Gerhold
[ Upstream commit 3c27ea23ffb43262da6c64964163895951aaed4e ] On Linux 5.9-rc1 I get the following warning with apq8016-sbc: WARNING: CPU: 2 PID: 69 at sound/core/init.c:207 snd_card_new+0x36c/0x3b0 [snd] CPU: 2 PID: 69 Comm: kworker/2:1 Not tainted 5.9.0-rc1 #1 Workqueue: events deferred_probe_work_func pc : snd_card_new+0x36c/0x3b0 [snd] lr : snd_card_new+0xf4/0x3b0 [snd] Call trace: snd_card_new+0x36c/0x3b0 [snd] snd_soc_bind_card+0x340/0x9a0 [snd_soc_core] snd_soc_register_card+0xf4/0x110 [snd_soc_core] devm_snd_soc_register_card+0x44/0xa0 [snd_soc_core] apq8016_sbc_platform_probe+0x11c/0x140 [snd_soc_apq8016_sbc] This warning was introduced in commit 81033c6b584b ("ALSA: core: Warn on empty module"). It looks like we are supposed to set card->owner to THIS_MODULE. Fix this for all the qcom ASoC drivers. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: 79119c798649 ("ASoC: qcom: Add Storm machine driver") Fixes: bdb052e81f62 ("ASoC: qcom: add apq8016 sound card support") Fixes: a6f933f63f2f ("ASoC: qcom: apq8096: Add db820c machine driver") Fixes: 6b1687bf76ef ("ASoC: qcom: add sdm845 sound card support") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200820154511.203072-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23clk: rockchip: Fix initialization of mux_pll_src_4plls_pNathan Chancellor
[ Upstream commit e9c006bc782c488f485ffe50de20b44e1e3daa18 ] A new warning in Clang points out that the initialization of mux_pll_src_4plls_p appears incorrect: ../drivers/clk/rockchip/clk-rk3228.c:140:58: warning: suspicious concatenation of string literals in an array initialization; did you mean to separate the elements with a comma? [-Wstring-concatenation] PNAME(mux_pll_src_4plls_p) = { "cpll", "gpll", "hdmiphy" "usb480m" }; ^ , ../drivers/clk/rockchip/clk-rk3228.c:140:48: note: place parentheses around the string literal to silence warning PNAME(mux_pll_src_4plls_p) = { "cpll", "gpll", "hdmiphy" "usb480m" }; ^ 1 warning generated. Given the name of the variable and the same variable name in rv1108, it seems that this should have been four distinct elements. Fix it up by adding the comma as suggested. Fixes: 307a2e9ac524 ("clk: rockchip: add clock controller for rk3228") Link: https://github.com/ClangBuiltLinux/linux/issues/1123 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20200810044020.2063350-1-natechancellor@gmail.com Reviewed-by: Heiko Stübner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23clk: davinci: Use the correct size when allocating memoryChristophe JAILLET
[ Upstream commit 3dabfa2bda48dab717986609762ce2a49335eb99 ] 'sizeof(*pllen)' should be used in place of 'sizeof(*pllout)' to avoid a small over-allocation. Fixes: 2d1726915159 ("clk: davinci: New driver for davinci PLL clocks") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200809144959.747986-1-christophe.jaillet@wanadoo.fr Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23KVM: MIPS: Change the definition of kvm typeHuacai Chen
[ Upstream commit 15e9e35cd1dec2bc138464de6bf8ef828df19235 ] MIPS defines two kvm types: #define KVM_VM_MIPS_TE 0 #define KVM_VM_MIPS_VZ 1 In Documentation/virt/kvm/api.rst it is said that "You probably want to use 0 as machine type", which implies that type 0 be the "automatic" or "default" type. And, in user-space libvirt use the null-machine (with type 0) to detect the kvm capability, which returns "KVM not supported" on a VZ platform. I try to fix it in QEMU but it is ugly: https://lists.nongnu.org/archive/html/qemu-devel/2020-08/msg05629.html And Thomas Huth suggests me to change the definition of kvm type: https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03281.html So I define like this: #define KVM_VM_MIPS_AUTO 0 #define KVM_VM_MIPS_VZ 1 #define KVM_VM_MIPS_TE 2 Since VZ and TE cannot co-exists, using type 0 on a TE platform will still return success (so old user-space tools have no problems on new kernels); the advantage is that using type 0 on a VZ platform will not return failure. So, the only problem is "new user-space tools use type 2 on old kernels", but if we treat this as a kernel bug, we can backport this patch to old stable kernels. Signed-off-by: Huacai Chen <chenhc@lemote.com> Message-Id: <1599734031-28746-1-git-send-email-chenhc@lemote.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23spi: Fix memory leak on splited transfersGustav Wiklander
[ Upstream commit b59a7ca15464c78ea1ba3b280cfc5ac5ece11ade ] In the prepare_message callback the bus driver has the opportunity to split a transfer into smaller chunks. spi_map_msg is done after prepare_message. Function spi_res_release releases the splited transfers in the message. Therefore spi_res_release should be called after spi_map_msg. The previous try at this was commit c9ba7a16d0f1 which released the splited transfers after spi_finalize_current_message had been called. This introduced a race since the message struct could be out of scope because the spi_sync call got completed. Fixes this leak on spi bus driver spi-bcm2835.c when transfer size is greater than 65532: Kmemleak: sg_alloc_table+0x28/0xc8 spi_map_buf+0xa4/0x300 __spi_pump_messages+0x370/0x748 __spi_sync+0x1d4/0x270 spi_sync+0x34/0x58 spi_test_execute_msg+0x60/0x340 [spi_loopback_test] spi_test_run_iter+0x548/0x578 [spi_loopback_test] spi_test_run_test+0x94/0x140 [spi_loopback_test] spi_test_run_tests+0x150/0x180 [spi_loopback_test] spi_loopback_test_probe+0x50/0xd0 [spi_loopback_test] spi_drv_probe+0x84/0xe0 Signed-off-by: Gustav Wiklander <gustavwi@axis.com> Link: https://lore.kernel.org/r/20200908151129.15915-1-gustav.wiklander@axis.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23i2c: algo: pca: Reapply i2c bus settings after resetEvan Nimmo
[ Upstream commit 0a355aeb24081e4538d4d424cd189f16c0bbd983 ] If something goes wrong (such as the SCL being stuck low) then we need to reset the PCA chip. The issue with this is that on reset we lose all config settings and the chip ends up in a disabled state which results in a lock up/high CPU usage. We need to re-apply any configuration that had previously been set and re-enable the chip. Signed-off-by: Evan Nimmo <evan.nimmo@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23f2fs: Return EOF on unaligned end of file DIO readGabriel Krisman Bertazi
[ Upstream commit 20d0a107fb35f37578b919f62bd474d6d358d579 ] Reading past end of file returns EOF for aligned reads but -EINVAL for unaligned reads on f2fs. While documentation is not strict about this corner case, most filesystem returns EOF on this case, like iomap filesystems. This patch consolidates the behavior for f2fs, by making it return EOF(0). it can be verified by a read loop on a file that does a partial read before EOF (A file that doesn't end at an aligned address). The following code fails on an unaligned file on f2fs, but not on btrfs, ext4, and xfs. while (done < total) { ssize_t delta = pread(fd, buf + done, total - done, off + done); if (!delta) break; ... } It is arguable whether filesystems should actually return EOF or -EINVAL, but since iomap filesystems support it, and so does the original DIO code, it seems reasonable to consolidate on that. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23f2fs: fix indefinite loop scanning for free nidSahitya Tummala
[ Upstream commit e2cab031ba7b5003cd12185b3ef38f1a75e3dae8 ] If the sbi->ckpt->next_free_nid is not NAT block aligned and if there are free nids in that NAT block between the start of the block and next_free_nid, then those free nids will not be scanned in scan_nat_page(). This results into mismatch between nm_i->available_nids and the sum of nm_i->free_nid_count of all NAT blocks scanned. And nm_i->available_nids will always be greater than the sum of free nids in all the blocks. Under this condition, if we use all the currently scanned free nids, then it will loop forever in f2fs_alloc_nid() as nm_i->available_nids is still not zero but nm_i->free_nid_count of that partially scanned NAT block is zero. Fix this to align the nm_i->next_scan_nid to the first nid of the corresponding NAT block. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23nvme-rdma: cancel async events before freeing event structDavid Milburn
[ Upstream commit 925dd04c1f9825194b9e444c12478084813b2b5d ] Cancel async event work in case async event has been queued up, and nvme_rdma_submit_async_event() runs after event has been freed. Signed-off-by: David Milburn <dmilburn@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23nvme-fc: cancel async events before freeing event structDavid Milburn
[ Upstream commit e126e8210e950bb83414c4f57b3120ddb8450742 ] Cancel async event work in case async event has been queued up, and nvme_fc_submit_async_event() runs after event has been freed. Signed-off-by: David Milburn <dmilburn@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23openrisc: Fix cache API compile issue when not inliningStafford Horne
[ Upstream commit 3ae90d764093dfcd6ab8ab6875377302892c87d4 ] I found this when compiling a kbuild random config with GCC 11. The config enables CONFIG_DEBUG_SECTION_MISMATCH, which sets CFLAGS -fno-inline-functions-called-once. This causes the call to cache_loop in cache.c to not be inlined causing the below compile error. In file included from arch/openrisc/mm/cache.c:13: arch/openrisc/mm/cache.c: In function 'cache_loop': ./arch/openrisc/include/asm/spr.h:16:27: warning: 'asm' operand 0 probably does not match constraints 16 | #define mtspr(_spr, _val) __asm__ __volatile__ ( \ | ^~~~~~~ arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr' 25 | mtspr(reg, line); | ^~~~~ ./arch/openrisc/include/asm/spr.h:16:27: error: impossible constraint in 'asm' 16 | #define mtspr(_spr, _val) __asm__ __volatile__ ( \ | ^~~~~~~ arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr' 25 | mtspr(reg, line); | ^~~~~ make[1]: *** [scripts/Makefile.build:283: arch/openrisc/mm/cache.o] Error 1 The asm constraint "K" requires a immediate constant argument to mtspr, however because of no inlining a register argument is passed causing a failure. Fix this by using __always_inline. Link: https://lore.kernel.org/lkml/202008200453.ohnhqkjQ%25lkp@intel.com/ Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23rapidio: Replace 'select' DMAENGINES 'with depends on'Laurent Pinchart
[ Upstream commit d2b86100245080cfdf1e95e9e07477474c1be2bd ] Enabling a whole subsystem from a single driver 'select' is frowned upon and won't be accepted in new drivers, that need to use 'depends on' instead. Existing selection of DMAENGINES will then cause circular dependencies. Replace them with a dependency. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23SUNRPC: stop printk reading past end of stringJ. Bruce Fields
[ Upstream commit 8c6b6c793ed32b8f9770ebcdf1ba99af423c303b ] Since p points at raw xdr data, there's no guarantee that it's NULL terminated, so we should give a length. And probably escape any special characters too. Reported-by: Zhi Li <yieli@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23NFS: Zero-stateid SETATTR should first return delegationChuck Lever
[ Upstream commit 644c9f40cf71969f29add32f32349e71d4995c0b ] If a write delegation isn't available, the Linux NFS client uses a zero-stateid when performing a SETATTR. NFSv4.0 provides no mechanism for an NFS server to match such a request to a particular client. It recalls all delegations for that file, even delegations held by the client issuing the request. If that client happens to hold a read delegation, the server will recall it immediately, resulting in an NFS4ERR_DELAY/CB_RECALL/ DELEGRETURN sequence. Optimize out this pipeline bubble by having the client return any delegations it may hold on a file before it issues a SETATTR(zero-stateid) on that file. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23spi: spi-loopback-test: Fix out-of-bounds readVincent Whitchurch
[ Upstream commit 837ba18dfcd4db21ad58107c65bfe89753aa56d7 ] The "tx/rx-transfer - crossing PAGE_SIZE" test always fails when len=131071 and rx_offset >= 5: spi-loopback-test spi0.0: Running test tx/rx-transfer - crossing PAGE_SIZE ... with iteration values: len = 131071, tx_off = 0, rx_off = 3 with iteration values: len = 131071, tx_off = 0, rx_off = 4 with iteration values: len = 131071, tx_off = 0, rx_off = 5 loopback strangeness - rx changed outside of allowed range at: ...a4321000 spi_msg@ffffffd5a4157690 frame_length: 131071 actual_length: 131071 spi_transfer@ffffffd5a41576f8 len: 131071 tx_buf: ffffffd5a4340ffc Note that rx_offset > 3 can only occur if the SPI controller driver sets ->dma_alignment to a higher value than 4, so most SPI controller drivers are not affect. The allocated Rx buffer is of size SPI_TEST_MAX_SIZE_PLUS, which is 132 KiB (assuming 4 KiB pages). This test uses an initial offset into the rx_buf of PAGE_SIZE - 4, and a len of 131071, so the range expected to be written in this transfer ends at (4096 - 4) + 5 + 131071 == 132 KiB, which is also the end of the allocated buffer. But the code which verifies the content of the buffer reads a byte beyond the allocated buffer and spuriously fails because this out-of-bounds read doesn't return the expected value. Fix this by using ITERATE_LEN instead of ITERATE_MAX_LEN to avoid testing sizes which cause out-of-bounds reads. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20200902132341.7079-1-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23regulator: pwm: Fix machine constraints applicationVincent Whitchurch
[ Upstream commit 59ae97a7a9e1499c2070e29841d1c4be4ae2994a ] If the zero duty cycle doesn't correspond to any voltage in the voltage table, the PWM regulator returns an -EINVAL from get_voltage_sel() which results in the core erroring out with a "failed to get the current voltage" and ending up not applying the machine constraints. Instead, return -ENOTRECOVERABLE which makes the core set the voltage since it's at an unknown value. For example, with this device tree: fooregulator { compatible = "pwm-regulator"; pwms = <&foopwm 0 100000>; regulator-min-microvolt = <2250000>; regulator-max-microvolt = <2250000>; regulator-name = "fooregulator"; regulator-always-on; regulator-boot-on; voltage-table = <2250000 30>; }; Before this patch: fooregulator: failed to get the current voltage(-22) After this patch: fooregulator: Setting 2250000-2250000uV fooregulator: 2250 mV Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20200902130952.24880-1-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discoveryJames Smart
[ Upstream commit 7b08e89f98cee9907895fabb64cf437bc505ce9a ] The driver is unable to successfully login with remote device. During pt2pt login, the driver completes its FLOGI request with the remote device having WWN precedence. The remote device issues its own (delayed) FLOGI after accepting the driver's and, upon transmitting the FLOGI, immediately recognizes it has already processed the driver's FLOGI thus it transitions to sending a PLOGI before waiting for an ACC to its FLOGI. In the driver, the FLOGI is received and an ACC sent, followed by the PLOGI being received and an ACC sent. The issue is that the PLOGI reception occurs before the response from the adapter from the FLOGI ACC is received. Processing of the PLOGI sets state flags to perform the REG_RPI mailbox command and proceed with the rest of discovery on the port. The same completion routine used by both FLOGI and PLOGI is generic in nature. One of the things it does is clear flags, and those flags happen to drive the rest of discovery. So what happened was the PLOGI processing set the flags, the FLOGI ACC completion cleared them, thus when the PLOGI ACC completes it doesn't see the flags and stops. Fix by modifying the generic completion routine to not clear the rest of discovery flag (NLP_ACC_REGLOGIN) unless the completion is also associated with performing a mailbox command as part of its handling. For things such as FLOGI ACC, there isn't a subsequent action to perform with the adapter, thus there is no mailbox cmd ptr. PLOGI ACC though will perform REG_RPI upon completion, thus there is a mailbox cmd ptr. Link: https://lore.kernel.org/r/20200828175332.130300-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23scsi: libfc: Fix for double free()Javed Hasan
[ Upstream commit 5a5b80f98534416b3b253859897e2ba1dc241e70 ] Fix for '&fp->skb' double free. Link: https://lore.kernel.org/r/20200825093940.19612-1-jhasan@marvell.com Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abortDinghao Liu
[ Upstream commit ea403fde7552bd61bad6ea45e3feb99db77cb31e ] When pm8001_tag_alloc() fails, task should be freed just like it is done in the subsequent error paths. Link: https://lore.kernel.org/r/20200823091453.4782-1-dinghao.liu@zju.edu.cn Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recallOlga Kornievskaia
[ Upstream commit 3d7a9520f0c3e6a68b6de8c5812fc8b6d7a52626 ] A client should be able to handle getting an ERR_DELAY error while doing a LOCK call to reclaim state due to delegation being recalled. This is a transient error that can happen due to server moving its volumes and invalidating its file location cache and upon reference to it during the LOCK call needing to do an expensive lookup (leading to an ERR_DELAY error on a PUTFH). Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23hv_netvsc: Remove "unlikely" from netvsc_select_queueHaiyang Zhang
commit 4d820543c54c47a2bd3c95ddbf52f83c89a219a0 upstream. When using vf_ops->ndo_select_queue, the number of queues of VF is usually bigger than the synthetic NIC. This condition may happen often. Remove "unlikely" from the comparison of ndev->real_num_tx_queues. Fixes: b3bf5666a510 ("hv_netvsc: defer queue selection to VF") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-23net: handle the return value of pskb_carve_frag_list() correctlyMiaohe Lin
commit eabe861881a733fc84f286f4d5a1ffaddd4f526f upstream. pskb_carve_frag_list() may return -ENOMEM in pskb_carve_inside_nonlinear(). we should handle this correctly or we would get wrong sk_buff. Fixes: 6fa01ccd8830 ("skbuff: Add pskb_extract() helper function") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-23RDMA/bnxt_re: Restrict the max_gids to 256Naresh Kumar PBS
commit 847b97887ed4569968d5b9a740f2334abca9f99a upstream. Some adapters report more than 256 gid entries. Restrict it to 256 for now. Fixes: 1ac5a4047975("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1598292876-26529-6-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-23gfs2: initialize transaction tr_ailX_lists earlierBob Peterson
commit cbcc89b630447ec7836aa2b9242d9bb1725f5a61 upstream. Since transactions may be freed shortly after they're created, before a log_flush occurs, we need to initialize their ail1 and ail2 lists earlier. Before this patch, the ail1 list was initialized in gfs2_log_flush(). This moves the initialization to the point when the transaction is first created. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Cc: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-23scsi: qla2xxx: Reduce holding sess_lock to prevent CPU lock-upQuinn Tran
commit 0aca77843e2803bf4fab1598b7891c56c16be979 upstream. - Reduce sess_lock holding to prevent CPU Lock up. sess_lock was held across fc_port registration and deletion. These calls can be blocked by upper layer. Sess_lock is also being accessed by interrupt thread. - Reduce number of loops in processing work_list to prevent kernel complaint of CPU lockup or holding sess_lock. Reported-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Tested-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Fixes: 9ba1cb25c151 ("scsi: qla2xxx: Remove all rports if fabric scan retry fails") Link: https://lore.kernel.org/linux-scsi/D01377DD-2E86-427B-BA0C-8D7649E37870@oracle.com/T/#t Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-23scsi: qla2xxx: Move rport registration out of internal work_listQuinn Tran
commit cd4ed6b470f1569692b5d0d295b207f870570829 upstream. Currently, the rport registration is being called from a single work element that is used to process QLA internal "work_list". This work_list is meant for quick and simple task (ie no sleep). The Rport registration process sometime can be delayed by upper layer. This causes back pressure with the internal queue where other jobs are unable to move forward. This patch will schedule the registration process with a new work element (fc_port.reg_work). While the RPort is being registered, the current state of the fcport will not move forward until the registration is done. If the state of the fabric has changed, a new field/next_disc_state will record the next action on whether to 'DELETE' or 'Reverify the session/ADISC'. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-23scsi: qla2xxx: Update rscn_rcvd field to more meaningful scan_neededQuinn Tran
commit cb873ba4002095d1e2fc60521bc4d860c7b72b92 upstream. Rename rscn_rcvd field to scan_needed to be more meaningful. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-23dsa: Allow forwarding of redirected IGMP trafficDaniel Mack
commit 1ed9ec9b08addbd8d3e36d5f4a652d8590a6ddb7 upstream. The driver for Marvell switches puts all ports in IGMP snooping mode which results in all IGMP/MLD frames that ingress on the ports to be forwarded to the CPU only. The bridge code in the kernel can then interpret these frames and act upon them, for instance by updating the mdb in the switch to reflect multicast memberships of stations connected to the ports. However, the IGMP/MLD frames must then also be forwarded to other ports of the bridge so external IGMP queriers can track membership reports, and external multicast clients can receive query reports from foreign IGMP queriers. Currently, this is impossible as the EDSA tagger sets offload_fwd_mark on the skb when it unwraps the tagged frames, and that will make the switchdev layer prevent the skb from egressing on any other port of the same switch. To fix that, look at the To_CPU code in the DSA header and make forwarding of the frame possible for trapped IGMP packets. Introduce some #defines for the frame types to make the code a bit more comprehensive. This was tested on a Marvell 88E6352 variant. Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: DENG Qingfang <dqfext@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17Linux 4.19.146v4.19.146Greg Kroah-Hartman
Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17gcov: add support for GCC 10.1Peter Oberparleiter
[ Upstream commit 40249c6962075c040fd071339acae524f18bfac9 ] Using gcov to collect coverage data for kernels compiled with GCC 10.1 causes random malfunctions and kernel crashes. This is the result of a changed GCOV_COUNTERS value in GCC 10.1 that causes a mismatch between the layout of the gcov_info structure created by GCC profiling code and the related structure used by the kernel. Fix this by updating the in-kernel GCOV_COUNTERS value. Also re-enable config GCOV_KERNEL for use with GCC 10. Reported-by: Colin Ian King <colin.king@canonical.com> Reported-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Tested-by: Leon Romanovsky <leonro@nvidia.com> Tested-and-Acked-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-17usb: typec: ucsi: acpi: Check the _DEP dependenciesHeikki Krogerus
commit 1f3546ff3f0a1000971daef58406954bad3f7061 upstream. Failing probe with -EPROBE_DEFER until all dependencies listed in the _DEP (Operation Region Dependencies) object have been met. This will fix an issue where on some platforms UCSI ACPI driver fails to probe because the address space handler for the operation region that the UCSI ACPI interface uses has not been loaded yet. Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200904110918.51546-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17usb: Fix out of sync data toggle if a configured device is reconfiguredMathias Nyman
commit cfd54fa83a5068b61b7eb28d3c117d8354c74c7a upstream. Userspace drivers that use a SetConfiguration() request to "lightweight" reset an already configured usb device might cause data toggles to get out of sync between the device and host, and the device becomes unusable. The xHCI host requires endpoints to be dropped and added back to reset the toggle. If USB core notices the new configuration is the same as the current active configuration it will avoid these extra steps by calling usb_reset_configuration() instead of usb_set_configuration(). A SetConfiguration() request will reset the device side data toggles. Make sure usb_reset_configuration() function also drops and adds back the endpoints to ensure data toggles are in sync. To avoid code duplication split the current usb_disable_device() function and reuse the endpoint specific part. Cc: stable <stable@vger.kernel.org> Tested-by: Martin Thierer <mthierer@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200901082528.12557-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modulesAleksander Morgado
commit 1ac698790819b83f39fd7ea4f6cdabee9bdd7b38 upstream. These modules have 2 different USB layouts: The default layout with PID 0x9205 (AT+CUSBSELNV=1) exposes 4 TTYs and an ECM interface: T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9205 Rev=00.00 S: Manufacturer=SimTech, Incorporated S: Product=SimTech SIM7080 S: SerialNumber=1234567890ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether The purpose of each TTY is as follows: * ttyUSB0: DIAG/QCDM port. * ttyUSB1: GNSS data. * ttyUSB2: AT-capable port (control). * ttyUSB3: AT-capable port (data). In the secondary layout with PID=0x9206 (AT+CUSBSELNV=86) the module exposes 6 TTY ports: T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9206 Rev=00.00 S: Manufacturer=SimTech, Incorporated S: Product=SimTech SIM7080 S: SerialNumber=1234567890ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option The purpose of each TTY is as follows: * ttyUSB0: DIAG/QCDM port. * ttyUSB1: GNSS data. * ttyUSB2: AT-capable port (control). * ttyUSB3: QFLOG interface. * ttyUSB4: DAM interface. * ttyUSB5: AT-capable port (data). Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17USB: serial: option: support dynamic Quectel USB compositionsBjørn Mork
commit 2bb70f0a4b238323e4e2f392fc3ddeb5b7208c9e upstream. The USB composition, defining the set of exported functions, is dynamic in newer Quectel modems. Default functions can be disabled and alternative functions can be enabled instead. The alternatives includes class functions using interface pairs, which should be handled by the respective class drivers. Active interfaces are numbered consecutively, so static blacklisting based on interface numbers will fail when the composition changes. An example of such an error, where the option driver has bound to the CDC ECM data interface, preventing cdc_ether from handling this function: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0125 Rev= 3.18 S: Manufacturer=Quectel S: Product=EC25-AF C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I:* If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Another device with the same id gets correct drivers, since the interface of the network function happens to be blacklisted by option: T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0125 Rev= 3.18 S: Manufacturer=Android S: Product=Android C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Change rules for EC21, EC25, BG96 and EG95 to match vendor specific serial functions only, to prevent binding to class functions. Require 2 endpoints on ff/ff/ff functions, avoiding the 3 endpoint QMI/RMNET network functions. Cc: AceLan Kao <acelan.kao@canonical.com> Cc: Sebastian Sjoholm <ssjoholm@mac.com> Cc: Dan Williams <dcbw@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17USB: serial: ftdi_sio: add IDs for Xsens Mti USB converterPatrick Riphagen
commit 6ccc48e0eb2f3a5f3bd39954a21317e5f8874726 upstream. The device added has an FTDI chip inside. The device is used to connect Xsens USB Motion Trackers. Cc: stable@vger.kernel.org Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17usb: core: fix slab-out-of-bounds Read in read_descriptorsZeng Tao
commit a18cd6c9b6bc73dc17e8b7e9bd07decaa8833c97 upstream. The USB device descriptor may get changed between two consecutive enumerations on the same device for some reason, such as DFU or malicius device. In that case, we may access the changing descriptor if we don't take the device lock here. The issue is reported: https://syzkaller.appspot.com/bug?id=901a0d9e6519ef8dc7acab25344bd287dd3c7be9 Cc: stable <stable@vger.kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Reported-by: syzbot+256e56ddde8b8957eabd@syzkaller.appspotmail.com Fixes: 217a9081d8e6 ("USB: add all configs to the "descriptors" attribute") Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com> Link: https://lore.kernel.org/r/1599201467-11000-1-git-send-email-prime.zeng@hisilicon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY initSivaprakash Murugesan
commit afd55e6d1bd35b4b36847869011447a83a81c8e0 upstream. There were some problem in ipq8074 Gen2 PCIe phy init sequence. 1. Few register values were wrongly updated in the phy init sequence. 2. The register QSERDES_RX_SIGDET_CNTRL is a RX tuning parameter register which is added in serdes table causing the wrong register was getting updated. 3. Clocks and resets were not added in the phy init. Fix these to make Gen2 PCIe port on ipq8074 devices to work. Fixes: eef243d04b2b6 ("phy: qcom-qmp: Add support for IPQ8074") Cc: stable@vger.kernel.org Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Link: https://lore.kernel.org/r/1596036607-11877-4-git-send-email-sivaprak@codeaurora.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17staging: greybus: audio: fix uninitialized value issueVaibhav Agarwal
commit 1dffeb8b8b4c261c45416d53c75ea51e6ece1770 upstream. The current implementation for gbcodec_mixer_dapm_ctl_put() uses uninitialized gbvalue for comparison with updated value. This was found using static analysis with coverity. Uninitialized scalar variable (UNINIT) 11. uninit_use: Using uninitialized value gbvalue.value.integer_value[0]. 460 if (gbvalue.value.integer_value[0] != val) { This patch fixes the issue with fetching the gbvalue before using it for comparision. Fixes: 6339d2322c47 ("greybus: audio: Add topology parser for GB codec") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/bc4f29eb502ccf93cd2ffd98db0e319fa7d0f247.1597408126.git.vaibhav.sr@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17video: fbdev: fix OOB read in vga_8planes_imageblit()Tetsuo Handa
commit bd018a6a75cebb511bb55a0e7690024be975fe93 upstream. syzbot is reporting OOB read at vga_8planes_imageblit() [1], for "cdat[y] >> 4" can become a negative value due to "const char *cdat". [1] https://syzkaller.appspot.com/bug?id=0d7a0da1557dcd1989e00cb3692b26d4173b4132 Reported-by: syzbot <syzbot+69fbd3e01470f169c8c4@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/90b55ec3-d5b0-3307-9f7c-7ff5c5fd6ad3@i-love.sakura.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17ARM: dts: vfxxx: Add syscon compatible with OCOTPChris Healy
commit 2a6838d54128952ace6f0ca166dd8706abe46649 upstream. Add syscon compatibility with Vybrid OCOTP node. This is required to access the UID. Fixes: fa8d20c8dbb77 ("ARM: dts: vfxxx: Add node corresponding to OCOTP") Cc: stable@vger.kernel.org Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-21 01:23:38 +0000