| Age | Commit message (Collapse) | Author |
|---|
|
This was detected by the self-test thanks to Ard's chunking patch.
I finally got around to testing this out on my ancient Via box. It
turns out that the workaround got the assembly wrong and we end up
doing count + initial cycles of the loop instead of just count.
This obviously causes corruption, either by overwriting the source
that is yet to be processed, or writing over the end of the buffer.
On CPUs that don't require the workaround only ECB is affected.
On Nano CPUs both ECB and CBC are affected.
This patch fixes it by doing the subtraction prior to the assembly.
Fixes: a76c1c23d0c3 ("crypto: padlock-aes - work around Nano CPU...")
Cc: <stable@vger.kernel.org>
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The RX SGL in processing is already registered with the RX SGL tracking
list to support proper cleanup. The cleanup code path uses the
sg_num_bytes variable which must therefore be always initialized, even
in the error code path.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Reported-by: syzbot+9c251bdd09f83b92ba95@syzkaller.appspotmail.com
#syz test: https://github.com/google/kmsan.git master
CC: <stable@vger.kernel.org> #4.14
Fixes: e870456d8e7c ("crypto: algif_skcipher - overhaul memory management")
Fixes: d887c52d6ae4 ("crypto: algif_aead - overhaul memory management")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add explicit RETs to the tail calls of AEGIS and MORUS crypto algorithms
otherwise they run into INT3 padding due to
("x86/asm: Pad assembly functions with INT3 instructions")
leading to spurious debug exceptions.
Mike Galbraith <efault@gmx.de> took care of all the remaining callsites.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Building the kernel with CONFIG_THUMB2_KERNEL=y and
CONFIG_CRYPTO_SPECK_NEON set fails with the following errors:
arch/arm/crypto/speck-neon-core.S: Assembler messages:
arch/arm/crypto/speck-neon-core.S:419: Error: r13 not allowed here -- `bic sp,#0xf'
arch/arm/crypto/speck-neon-core.S:423: Error: r13 not allowed here -- `bic sp,#0xf'
arch/arm/crypto/speck-neon-core.S:427: Error: r13 not allowed here -- `bic sp,#0xf'
arch/arm/crypto/speck-neon-core.S:431: Error: r13 not allowed here -- `bic sp,#0xf'
The problem is that the 'bic' instruction can't operate on the 'sp'
register in Thumb2 mode. Fix it by using a temporary register. This
isn't in the main loop, so the performance difference is negligible.
This also matches what aes-neonbs-core.S does.
Reported-by: Stefan Agner <stefan@agner.ch>
Fixes: ede9622162fa ("crypto: arm/speck - add NEON-accelerated implementation of Speck-XTS")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
enable_best_rng() is used in hwrng_unregister() to switch away from the
currently active RNG, if that is the one currently being removed.
However enable_best_rng() might fail, if the next RNG's init routine
fails. In that case enable_best_rng() will return an error code and
the currently active RNG will remain active.
After unregistering this might lead to crashes due to use-after-free.
Fix this by dropping the currently active RNG, if enable_best_rng()
failed. This will result in no RNG to be active, if the next-best
one failed to initialize.
This problem was introduced by 142a27f0a731ddcf467546960a5585970ca98e21
Fixes: 142a27f0a731 ("hwrng: core - Reset user selected rng by...")
Reported-by: Wirz <spam@lukas-wirz.de>
Tested-by: Wirz <spam@lukas-wirz.de>
Signed-off-by: Michael Büsch <m@bues.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We must load the block from the temporary variable here, not directly
from the input.
Also add forgotten zeroing-out of the uninitialized part of the
temporary block (as is done correctly in morus1280.c).
Fixes: 396be41f16fd ("crypto: morus - Add generic MORUS AEAD implementations")
Reported-by: syzbot+1fafa9c4cf42df33f716@syzkaller.appspotmail.com
Reported-by: syzbot+d82643ba80bf6937cd44@syzkaller.appspotmail.com
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
keccakf() is the only function in kernel that uses __optimize() macro.
__optimize() breaks frame pointer unwinder as optimized code uses RBP,
and amusingly this always lead to degraded performance as gcc does not
inline across different optimizations levels, so keccakf() wasn't inlined
into its callers and keccakf_round() wasn't inlined into keccakf().
Drop __optimize() to resolve both problems.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 83dee2ce1ae7 ("crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize")
Reported-by: syzbot+37035ccfa9a0a017ffcf@syzkaller.appspotmail.com
Reported-by: syzbot+e073e4740cfbb3ae200b@syzkaller.appspotmail.com
Cc: linux-crypto@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
kernel_neon_begin, _end
In a arm64 server(QDF2400),I met a similar might-sleep warning as [1]:
[ 7.019116] BUG: sleeping function called from invalid context at
./include/crypto/algapi.h:416
[ 7.027863] in_atomic(): 1, irqs_disabled(): 0, pid: 410, name:
cryptomgr_test
[ 7.035106] 1 lock held by cryptomgr_test/410:
[ 7.039549] #0: (ptrval) (&drbg->drbg_mutex){+.+.}, at:
drbg_instantiate+0x34/0x398
[ 7.048038] CPU: 9 PID: 410 Comm: cryptomgr_test Not tainted
4.17.0-rc6+ #27
[ 7.068228] dump_backtrace+0x0/0x1c0
[ 7.071890] show_stack+0x24/0x30
[ 7.075208] dump_stack+0xb0/0xec
[ 7.078523] ___might_sleep+0x160/0x238
[ 7.082360] skcipher_walk_done+0x118/0x2c8
[ 7.086545] ctr_encrypt+0x98/0x130
[ 7.090035] simd_skcipher_encrypt+0x68/0xc0
[ 7.094304] drbg_kcapi_sym_ctr+0xd4/0x1f8
[ 7.098400] drbg_ctr_update+0x98/0x330
[ 7.102236] drbg_seed+0x1b8/0x2f0
[ 7.105637] drbg_instantiate+0x2ac/0x398
[ 7.109646] drbg_kcapi_seed+0xbc/0x188
[ 7.113482] crypto_rng_reset+0x4c/0xb0
[ 7.117319] alg_test_drbg+0xec/0x330
[ 7.120981] alg_test.part.6+0x1c8/0x3c8
[ 7.124903] alg_test+0x58/0xa0
[ 7.128044] cryptomgr_test+0x50/0x58
[ 7.131708] kthread+0x134/0x138
[ 7.134936] ret_from_fork+0x10/0x1c
Seems there is a bug in Ard Biesheuvel's commit.
Fixes: 683381747270 ("crypto: arm64/aes-blk - move kernel mode neon
en/disable into loop")
[1] https://www.spinics.net/lists/linux-crypto/msg33103.html
Signed-off-by: jia.he@hxt-semitech.com
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # 4.17
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We call chtls_free_skb() but then we dereference it on the next lines.
Also "skb" can't be NULL, we just dereferenced it on the line before.
I have moved the free down a couple lines to fix this issue.
Fixes: 17a7d24aa89d ("crypto: chtls - generic handling of data and hdr")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
- unindented continue
- check for null page
- signed return
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
skb dereferenced before check in sendpage
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
address suspicious code <gustavo@embeddedor.com>
1210 set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
1211 }
The issue is that in the code above, set_bit is never reached
due to the 'continue' statement at line 1208.
Also reported by bug report:<dan.carpenter@oracle.com>
1210 set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Not reachable.
Its required to wait for buffer in the send path and takes care of
unaddress and un-handled SOCK_NOSPACE.
v2: use csk_mem_free where appropriate
proper indent of goto do_nonblock
replace out with do_rm_wq
Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
corrected the key length to copy 128b key. Removed 192b and 256b
key as user input supports key of size 128b in gcm_ctx
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This reverts commit eb772f37ae8163a89e28a435f6a18742ae06653b, as now the
x86 Salsa20 implementation has been removed and the generic helpers are
no longer needed outside of salsa20_generic.c.
We could keep this just in case someone else wants to add a new
optimized Salsa20 implementation. But given that we have ChaCha20 now
too, I think it's unlikely. And this can always be reverted back.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The x86 assembly implementations of Salsa20 use the frame base pointer
register (%ebp or %rbp), which breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Recent (v4.10+) kernels will warn about this, e.g.
WARNING: kernel stack regs at 00000000a8291e69 in syzkaller047086:4677 has bad 'bp' value 000000001077994c
[...]
But after looking into it, I believe there's very little reason to still
retain the x86 Salsa20 code. First, these are *not* vectorized
(SSE2/SSSE3/AVX2) implementations, which would be needed to get anywhere
close to the best Salsa20 performance on any remotely modern x86
processor; they're just regular x86 assembly. Second, it's still
unclear that anyone is actually using the kernel's Salsa20 at all,
especially given that now ChaCha20 is supported too, and with much more
efficient SSSE3 and AVX2 implementations. Finally, in benchmarks I did
on both Intel and AMD processors with both gcc 8.1.0 and gcc 4.9.4, the
x86_64 salsa20-asm is actually slightly *slower* than salsa20-generic
(~3% slower on Skylake, ~10% slower on Zen), while the i686 salsa20-asm
is only slightly faster than salsa20-generic (~15% faster on Skylake,
~20% faster on Zen). The gcc version made little difference.
So, the x86_64 salsa20-asm is pretty clearly useless. That leaves just
the i686 salsa20-asm, which based on my tests provides a 15-20% speed
boost. But that's without updating the code to not use %ebp. And given
the maintenance cost, the small speed difference vs. salsa20-generic,
the fact that few people still use i686 kernels, the doubt that anyone
is even using the kernel's Salsa20 at all, and the fact that a SSE2
implementation would almost certainly be much faster on any remotely
modern x86 processor yet no one has cared enough to add one yet, I don't
think it's worthwhile to keep.
Thus, just remove both the x86_64 and i686 salsa20-asm implementations.
Reported-by: syzbot+ffa3a158337bbc01ff09@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The GET_ID command, added as of SEV API v0.16, allows the SEV firmware
to be queried about a unique CPU ID. This unique ID can then be used
to obtain the public certificate containing the Chip Endorsement Key
(CEK) public key signed by the AMD SEV Signing Key (ASK).
For more information please refer to "Section 5.12 GET_ID" of
https://support.amd.com/TechDocs/55766_SEV-KM%20API_Specification.pdf
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The DOWNLOAD_FIRMWARE command, added as of SEV API v0.15, allows the OS
to install SEV firmware newer than the currently active SEV firmware.
For the new SEV firmware to be applied it must:
* Pass the validation test performed by the existing firmware.
* Be of the same build or a newer build compared to the existing firmware.
For more information please refer to "Section 5.11 DOWNLOAD_FIRMWARE" of
https://support.amd.com/TechDocs/55766_SEV-KM%20API_Specification.pdf
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Conor McLoughlin <conor.mcloughlin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The cache parameter register configuration was being too verbose.
Use dev_dbg() to only provide the information if needed.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use managed clock handling, differentiate between no clock (possibly OK)
and clock init failure (never OK) and correctly handle clock detection
being deferred.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The product signature and HW revision register have different offset on the
older HW revisions.
This fixes the problem of the driver failing sanity check on silicon
despite working on the FPGA emulation systems.
Fixes: 27b3b22dd98c ("crypto: ccree - add support for older HW revs")
Cc: stable@vger.kernel.org
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Extends memory required for IV to include B0 Block and DMA map in
single operation.
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Send IV in WR as immediate instead of dma mapped entry for cipher.
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Change the return type based on following patch
https://www.mail-archive.com/linux-crypto@vger.kernel.org/msg28552.html
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Coverity warns about an
"Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN)"
when computing the congestion threshold value.
Even though it is highly unlikely for an overflow to happen,
use this as an opportunity to simplify the code.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In some cases the CCB DMA-based internal transfer started by the MOVE
command (src=M3 register, dst=descriptor buffer) does not finish
in time and DECO executes the unpatched descriptor.
This leads eventually to a DECO Watchdog Timer timeout error.
To make sure the transfer ends, change the MOVE command to be blocking.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Management Complex (MC) f/w detection is based on CTPR_MS[DPAA2] bit.
This is incorrect since:
-the bit is set for all CAAM blocks integrated in SoCs with a certain
Layerscape Chassis
-some SoCs with LS Chassis don't have an MC block (thus no MC f/w)
To fix this, MC f/w detection will be based on the presence of
"fsl,qoriq-mc" compatible string in the device tree.
Fixes: 297b9cebd2fc0 ("crypto: caam/jr - add support for DPAA2 parts")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Several source files have been taken from OpenSSL. In some of them a
comment that "permission to use under GPL terms is granted" was
included below a contradictory license statement. In several cases,
there was no indication that the license of the code was compatible
with the GPLv2.
This change clarifies the licensing for all of these files. I've
confirmed with the author (Andy Polyakov) that a) he has licensed the
files with the GPLv2 comment under that license and b) that he's also
happy to license the other files under GPLv2 too. In one case, the
file is already contained in his CRYPTOGAMS bundle, which has a GPLv2
option, and so no special measures are needed.
In all cases, the license status of code has been clarified by making
the GPLv2 license prominent.
The .S files have been regenerated from the updated .pl files.
This is a comment-only change. No code is changed.
Signed-off-by: Adam Langley <agl@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 56e8e57fc3a7 ("crypto: morus - Add common SIMD glue code for
MORUS") accidetally consiedered the glue code to be usable by different
architectures, but it seems to be only usable on x86.
This patch moves it under arch/x86/crypto and adds 'depends on X86' to
the Kconfig options and also removes the prompt to hide these internal
options from the user.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently testmgr has separate encryption and decryption test vectors
for symmetric ciphers. That's massively redundant, since with few
exceptions (mostly mistakes, apparently), all decryption tests are
identical to the encryption tests, just with the input/result flipped.
Therefore, eliminate the redundancy by removing the decryption test
vectors and updating testmgr to test both encryption and decryption
using what used to be the encryption test vectors. Naming is adjusted
accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext'
(ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and
'rlen'. Note that it was always the case that 'ilen == rlen'.
AES keywrap ("kw(aes)") is special because its IV is generated by the
encryption. Previously this was handled by specifying 'iv_out' for
encryption and 'iv' for decryption. To make it work cleanly with only
one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a
boolean that indicates that the IV is generated by the encryption.
In total, this removes over 10000 lines from testmgr.h, with no
reduction in test coverage since prior patches already copied the few
unique decryption test vectors into the encryption test vectors.
This covers all algorithms that used 'struct cipher_testvec', e.g. any
block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or
keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD
tests, though we probably can eliminate a similar redundancy there too.
The testmgr.h portion of this patch was automatically generated using
the following awk script, with some slight manual fixups on top (updated
'struct cipher_testvec' definition, updated a few comments, and fixed up
the AES keywrap test vectors):
BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER }
/^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC }
/^static const struct cipher_testvec.*_dec_/ { mode = DECVEC }
mode == ENCVEC && !/\.ilen[[:space:]]*=/ {
sub(/\.input[[:space:]]*=$/, ".ptext =")
sub(/\.input[[:space:]]*=/, ".ptext\t=")
sub(/\.result[[:space:]]*=$/, ".ctext =")
sub(/\.result[[:space:]]*=/, ".ctext\t=")
sub(/\.rlen[[:space:]]*=/, ".len\t=")
print
}
mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER }
mode == OTHER { print }
mode == ENCVEC && /^};/ { mode = OTHER }
mode == DECVEC && /^};/ { mode = DECVEC_TAIL }
Note that git's default diff algorithm gets confused by the testmgr.h
portion of this patch, and reports too many lines added and removed.
It's better viewed with 'git diff --minimal' (or 'git show --minimal'),
which reports "2 files changed, 919 insertions(+), 11723 deletions(-)".
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
One "kw(aes)" decryption test vector doesn't exactly match an encryption
test vector with input and result swapped. In preparation for removing
the decryption test vectors, add this test vector to the encryption test
vectors, so we don't lose any test coverage.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
None of the four "ecb(tnepres)" decryption test vectors exactly match an
encryption test vector with input and result swapped. In preparation
for removing the decryption test vectors, add these to the encryption
test vectors, so we don't lose any test coverage.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
One "cbc(des)" decryption test vector doesn't exactly match an
encryption test vector with input and result swapped. It's *almost* the
same as one, but the decryption version is "chunked" while the
encryption version is "unchunked". In preparation for removing the
decryption test vectors, make the encryption one both chunked and
unchunked, so we don't lose any test coverage.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Two "ecb(des)" decryption test vectors don't exactly match any of the
encryption test vectors with input and result swapped. In preparation
for removing the decryption test vectors, add these to the encryption
test vectors, so we don't lose any test coverage.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
AEGIS-256 key is two blocks, not one.
Fixes: 1d373d4e8e15 ("crypto: x86 - Add optimized AEGIS implementations")
Reported-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
crc32c has an unkeyed test vector but crc32 did not. Add the crc32c one
(which uses an empty input) to crc32 too, and also add a new one to both
that uses a nonempty input. These test vectors verify that crc32 and
crc32c implementations use the correct default initial state.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since testmgr uses a single tfm for all tests of each hash algorithm,
once a key is set the tfm won't be unkeyed anymore. But with crc32 and
crc32c, the key is really the "default initial state" and is optional;
those algorithms should have both keyed and unkeyed test vectors, to
verify that implementations use the correct default key.
Simply listing the unkeyed test vectors first isn't guaranteed to work
yet because testmgr makes multiple passes through the test vectors.
crc32c does have an unkeyed test vector listed first currently, but it
only works by chance because the last crc32c test vector happens to use
a key that is the same as the default key.
Therefore, teach testmgr to split hash test vectors into unkeyed and
keyed sections, and do all the unkeyed ones before the keyed ones.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The Blackfin CRC driver was removed by commit 9678a8dc53c1 ("crypto:
bfin_crc - remove blackfin CRC driver"), but it was forgotten to remove
the corresponding "hmac(crc32)" test vectors. I see no point in keeping
them since nothing else appears to implement or use "hmac(crc32)", which
isn't an algorithm that makes sense anyway because HMAC is meant to be
used with a cryptographically secure hash function, which CRC's are not.
Thus, remove the unneeded test vectors.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The __crc32_le() wrapper function is pointless. Just call crc32_le()
directly instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
crc32c-generic sets an alignmask, but actually its ->update() works with
any alignment; only its ->setkey() and outputting the final digest
assume an alignment. To prevent the buffer from having to be aligned by
the crypto API for just these cases, switch these cases over to the
unaligned access macros and remove the cra_alignmask. Note that this
also makes crc32c-generic more consistent with crc32-generic.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
crc32-generic doesn't have a cra_alignmask set, which is desired as its
->update() works with any alignment. However, it incorrectly assumes
4-byte alignment in ->setkey() and when outputting the final digest.
Fix this by using the unaligned access macros in those cases.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In do_chtls_setsockopt(), the tls crypto info is first copied from the
poiner 'optval' in userspace and saved to 'tmp_crypto_info'. Then the
'version' of the crypto info is checked. If the version is not as expected,
i.e., TLS_1_2_VERSION, error code -ENOTSUPP is returned to indicate that
the provided crypto info is not supported yet. Then, the 'cipher_type'
field of the 'tmp_crypto_info' is also checked to see if it is
TLS_CIPHER_AES_GCM_128. If it is, the whole struct of
tls12_crypto_info_aes_gcm_128 is copied from the pointer 'optval' and then
the function chtls_setkey() is invoked to set the key.
Given that the 'optval' pointer resides in userspace, a malicious userspace
process can race to change the data pointed by 'optval' between the two
copies. For example, a user can provide a crypto info with TLS_1_2_VERSION
and TLS_CIPHER_AES_GCM_128. After the first copy, the user can modify the
'version' and the 'cipher_type' fields to any versions and/or cipher types
that are not allowed. This way, the user can bypass the checks, inject
bad data to the kernel, cause chtls_setkey() to set a wrong key or other
issues.
This patch reuses the data copied in the first try so as to ensure these
checks will not be bypassed.
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds the authenc(hmac(sha1),cbc(aes)) AEAD algorithm
support to the Inside Secure SafeXcel driver.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds the authenc(hmac(sha224),cbc(aes)) AEAD algorithm
support to the Inside Secure SafeXcel driver.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for the first AEAD algorithm in the Inside
Secure SafeXcel driver, authenc(hmac(sha256),cbc(aes)). As this is the
first AEAD algorithm added to this driver, common AEAD functions are
added as well.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch improves the error reporting from the Inside Secure driver to
the upper layers and crypto consumers. All errors reported by the engine
aren't fatal, and some may be genuine.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This commit fixes the CONTEXT_CONTROL_TYPE_HASH_ENCRYPT_OUT and
CONTEXT_CONTROL_TYPE_HASH_DECRYPT_OUT types by assigning the right
value, and by renaming CONTEXT_CONTROL_TYPE_HASH_DECRYPT_OUT to
CONTEXT_CONTROL_TYPE_HASH_DECRYPT_IN.
This is not submitted as a fix for older kernel versions as these two
defines weren't used back then.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patches makes the key and context size computation dynamic when
using memzero_explicit() on these two arrays. This is safer, cleaner and
will help future modifications of the driver when these two parameters
sizes will changes (the context size will be bigger when using AEAD
algorithms).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch makes the context control size computation dynamic, not to
rely on hardcoded values. This is better for the future, and will help
adding the AEAD support.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
Herbert Xu
Stephan Mueller
Borislav Petkov
Eric Biggers
Michael Büsch
Ondrej Mosnáček
Dmitry Vyukov
Jia He
Dan Carpenter
Atul Gupta
Janakarajan Natarajan
Conor McLoughlin
Gilad Ben-Yossef
Harsh Jain
Horia Geantă
Adam Langley
Ondrej Mosnacek
Wenwen Wang
Antoine Tenart