diff options
Diffstat (limited to 'drivers')
39 files changed, 328 insertions, 750 deletions
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index c3eefa126e3b..f50072b51aef 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -266,6 +266,9 @@ static __init int efivar_ssdt_load(void) void *data; int ret; + if (!efivar_ssdt[0]) + return 0; + ret = efivar_init(efivar_ssdt_iter, &entries, true, &entries); list_for_each_entry_safe(entry, aux, &entries, list) { diff --git a/drivers/firmware/google/vpd_decode.c b/drivers/firmware/google/vpd_decode.c index e75abe9fa122..6c7ab2ba85d2 100644 --- a/drivers/firmware/google/vpd_decode.c +++ b/drivers/firmware/google/vpd_decode.c @@ -62,7 +62,7 @@ static int vpd_decode_entry(const u32 max_len, const u8 *input_buf, if (max_len - consumed < *entry_len) return VPD_FAIL; - consumed += decoded_len; + consumed += *entry_len; *_consumed = consumed; return VPD_OK; } diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index f1809a54fcee..c7f5f0be2d74 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2329,8 +2329,10 @@ static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value) if (!ret) goto set_output_value; /* Emulate open drain by not actively driving the line high */ - if (val) - return gpiod_direction_input(desc); + if (val) { + ret = gpiod_direction_input(desc); + goto set_output_flag; + } } else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) { ret = gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc), @@ -2338,8 +2340,10 @@ static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value) if (!ret) goto set_output_value; /* Emulate open source by not actively driving the line low */ - if (!val) - return gpiod_direction_input(desc); + if (!val) { + ret = gpiod_direction_input(desc); + goto set_output_flag; + } } else { gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc), PIN_CONFIG_DRIVE_PUSH_PULL); @@ -2359,6 +2363,17 @@ set_output_value: trace_gpio_value(desc_to_gpio(desc), 0, val); trace_gpio_direction(desc_to_gpio(desc), 0, ret); return ret; + +set_output_flag: + /* + * When emulating open-source or open-drain functionalities by not + * actively driving the line (setting mode to input) we still need to + * set the IS_OUT flag or otherwise we won't be able to set the line + * value anymore. + */ + if (ret == 0) + set_bit(FLAG_IS_OUT, &desc->flags); + return ret; } /** @@ -2540,8 +2555,6 @@ static void _gpio_set_open_drain_value(struct gpio_desc *desc, bool value) if (value) { err = chip->direction_input(chip, offset); - if (!err) - clear_bit(FLAG_IS_OUT, &desc->flags); } else { err = chip->direction_output(chip, offset, 0); if (!err) @@ -2571,8 +2584,6 @@ static void _gpio_set_open_source_value(struct gpio_desc *desc, bool value) set_bit(FLAG_IS_OUT, &desc->flags); } else { err = chip->direction_input(chip, offset); - if (!err) - clear_bit(FLAG_IS_OUT, &desc->flags); } trace_gpio_direction(desc_to_gpio(desc), !value, err); if (err < 0) diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c index 22426ae4af97..7d1895035af6 100644 --- a/drivers/iio/adc/ad799x.c +++ b/drivers/iio/adc/ad799x.c @@ -817,10 +817,10 @@ static int ad799x_probe(struct i2c_client *client, ret = ad799x_write_config(st, st->chip_config->default_config); if (ret < 0) - goto error_disable_reg; + goto error_disable_vref; ret = ad799x_read_config(st); if (ret < 0) - goto error_disable_reg; + goto error_disable_vref; st->config = ret; ret = iio_triggered_buffer_setup(indio_dev, NULL, diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c index 0153df01e7b6..546bbe59c241 100644 --- a/drivers/iio/adc/axp288_adc.c +++ b/drivers/iio/adc/axp288_adc.c @@ -16,6 +16,7 @@ * */ +#include <linux/dmi.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/device.h> @@ -34,6 +35,11 @@ #define AXP288_ADC_EN_MASK 0xF0 #define AXP288_ADC_TS_ENABLE 0x01 +#define AXP288_ADC_TS_BIAS_MASK GENMASK(5, 4) +#define AXP288_ADC_TS_BIAS_20UA (0 << 4) +#define AXP288_ADC_TS_BIAS_40UA (1 << 4) +#define AXP288_ADC_TS_BIAS_60UA (2 << 4) +#define AXP288_ADC_TS_BIAS_80UA (3 << 4) #define AXP288_ADC_TS_CURRENT_ON_OFF_MASK GENMASK(1, 0) #define AXP288_ADC_TS_CURRENT_OFF (0 << 0) #define AXP288_ADC_TS_CURRENT_ON_WHEN_CHARGING (1 << 0) @@ -194,10 +200,36 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev, return ret; } +/* + * We rely on the machine's firmware to correctly setup the TS pin bias current + * at boot. This lists systems with broken fw where we need to set it ourselves. + */ +static const struct dmi_system_id axp288_adc_ts_bias_override[] = { + { + /* Lenovo Ideapad 100S (11 inch) */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 100S-11IBY"), + }, + .driver_data = (void *)(uintptr_t)AXP288_ADC_TS_BIAS_80UA, + }, + {} +}; + static int axp288_adc_initialize(struct axp288_adc_info *info) { + const struct dmi_system_id *bias_override; int ret, adc_enable_val; + bias_override = dmi_first_match(axp288_adc_ts_bias_override); + if (bias_override) { + ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL, + AXP288_ADC_TS_BIAS_MASK, + (uintptr_t)bias_override->driver_data); + if (ret) + return ret; + } + /* * Determine if the TS pin is enabled and set the TS current-source * accordingly. diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c index 27005d84ed73..0dec733471d5 100644 --- a/drivers/iio/adc/hx711.c +++ b/drivers/iio/adc/hx711.c @@ -89,20 +89,35 @@ struct hx711_data { int gain_set; /* gain set on device */ int gain_chan_a; /* gain for channel A */ struct mutex lock; + /* + * delay after a rising edge on SCK until the data is ready DOUT + * this is dependent on the hx711 where the datasheet tells a + * maximum value of 100 ns + * but also on potential parasitic capacities on the wiring + */ + u32 data_ready_delay_ns; + u32 clock_frequency; }; static int hx711_cycle(struct hx711_data *hx711_data) { - int val; + unsigned long flags; /* * if preempted for more then 60us while PD_SCK is high: * hx711 is going in reset * ==> measuring is false */ - preempt_disable(); + local_irq_save(flags); gpiod_set_value(hx711_data->gpiod_pd_sck, 1); - val = gpiod_get_value(hx711_data->gpiod_dout); + + /* + * wait until DOUT is ready + * it turned out that parasitic capacities are extending the time + * until DOUT has reached it's value + */ + ndelay(hx711_data->data_ready_delay_ns); + /* * here we are not waiting for 0.2 us as suggested by the datasheet, * because the oscilloscope showed in a test scenario @@ -110,9 +125,16 @@ static int hx711_cycle(struct hx711_data *hx711_data) * and 0.56 us for PD_SCK low on TI Sitara with 800 MHz */ gpiod_set_value(hx711_data->gpiod_pd_sck, 0); - preempt_enable(); + local_irq_restore(flags); - return val; + /* + * make it a square wave for addressing cases with capacitance on + * PC_SCK + */ + ndelay(hx711_data->data_ready_delay_ns); + + /* sample as late as possible */ + return gpiod_get_value(hx711_data->gpiod_dout); } static int hx711_read(struct hx711_data *hx711_data) @@ -401,6 +423,7 @@ static const struct iio_chan_spec hx711_chan_spec[] = { static int hx711_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; struct hx711_data *hx711_data; struct iio_dev *indio_dev; int ret; @@ -474,6 +497,22 @@ static int hx711_probe(struct platform_device *pdev) hx711_data->gain_set = 128; hx711_data->gain_chan_a = 128; + hx711_data->clock_frequency = 400000; + ret = of_property_read_u32(np, "clock-frequency", + &hx711_data->clock_frequency); + + /* + * datasheet says the high level of PD_SCK has a maximum duration + * of 50 microseconds + */ + if (hx711_data->clock_frequency < 20000) { + dev_warn(dev, "clock-frequency too low - assuming 400 kHz\n"); + hx711_data->clock_frequency = 400000; + } + + hx711_data->data_ready_delay_ns = + 1000000000 / hx711_data->clock_frequency; + platform_set_drvdata(pdev, indio_dev); indio_dev->name = "hx711"; diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c index b91ebc3483ce..743fd2cfdd54 100644 --- a/drivers/iio/light/opt3001.c +++ b/drivers/iio/light/opt3001.c @@ -695,6 +695,7 @@ static irqreturn_t opt3001_irq(int irq, void *_iio) struct iio_dev *iio = _iio; struct opt3001 *opt = iio_priv(iio); int ret; + bool wake_result_ready_queue = false; if (!opt->ok_to_ignore_lock) mutex_lock(&opt->lock); @@ -729,13 +730,16 @@ static irqreturn_t opt3001_irq(int irq, void *_iio) } opt->result = ret; opt->result_ready = true; - wake_up(&opt->result_ready_queue); + wake_result_ready_queue = true; } out: if (!opt->ok_to_ignore_lock) mutex_unlock(&opt->lock); + if (wake_result_ready_queue) + wake_up(&opt->result_ready_queue); + return IRQ_HANDLED; } diff --git a/drivers/media/usb/stkwebcam/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c index c0bba773db25..a7da1356a36e 100644 --- a/drivers/media/usb/stkwebcam/stk-webcam.c +++ b/drivers/media/usb/stkwebcam/stk-webcam.c @@ -640,8 +640,7 @@ static int v4l_stk_release(struct file *fp) dev->owner = NULL; } - if (is_present(dev)) - usb_autopm_put_interface(dev->interface); + usb_autopm_put_interface(dev->interface); mutex_unlock(&dev->lock); return v4l2_fh_release(fp); } diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c index 6d0363deba61..0cbcbad8f074 100644 --- a/drivers/staging/fbtft/fbtft-core.c +++ b/drivers/staging/fbtft/fbtft-core.c @@ -828,7 +828,7 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display, if (par->gamma.curves && gamma) { if (fbtft_gamma_parse_str(par, par->gamma.curves, gamma, strlen(gamma))) - goto alloc_fail; + goto release_framebuf; } /* Transmit buffer */ @@ -845,7 +845,7 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display, if (txbuflen > 0) { txbuf = devm_kzalloc(par->info->device, txbuflen, GFP_KERNEL); if (!txbuf) - goto alloc_fail; + goto release_framebuf; par->txbuf.buf = txbuf; par->txbuf.len = txbuflen; } @@ -881,6 +881,9 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display, return info; +release_framebuf: + framebuffer_release(info); + alloc_fail: vfree(vmem); diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c index 84a915199e64..6edd87867ce0 100644 --- a/drivers/staging/vt6655/device_main.c +++ b/drivers/staging/vt6655/device_main.c @@ -1668,8 +1668,10 @@ vt6655_probe(struct pci_dev *pcid, const struct pci_device_id *ent) priv->hw->max_signal = 100; - if (vnt_init(priv)) + if (vnt_init(priv)) { + device_free_info(priv); return -ENODEV; + } device_print_info(priv); pci_set_drvdata(pcid, priv); diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index c9b8d702dadc..2e76eb4c604c 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -746,7 +746,8 @@ err_uart: static void __exit ulite_exit(void) { platform_driver_unregister(&ulite_platform_driver); - uart_unregister_driver(&ulite_uart_driver); + if (ulite_uart_driver.state) + uart_unregister_driver(&ulite_uart_driver); } module_init(ulite_init); diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index fb87c17ed6fa..50836f79f908 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -474,10 +474,12 @@ static int usblp_release(struct inode *inode, struct file *file) mutex_lock(&usblp_mutex); usblp->used = 0; - if (usblp->present) { + if (usblp->present) usblp_unlink_urbs(usblp); - usb_autopm_put_interface(usblp->intf); - } else /* finish cleanup from disconnect */ + + usb_autopm_put_interface(usblp->intf); + + if (!usblp->present) /* finish cleanup from disconnect */ usblp_cleanup(usblp); mutex_unlock(&usblp_mutex); return 0; diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index f04e91ef9e7c..7e90f786d923 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -50,6 +50,7 @@ #define DRIVER_VERSION "02 May 2005" #define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */ +#define POWER_BUDGET_3 900 /* in mA */ static const char driver_name[] = "dummy_hcd"; static const char driver_desc[] = "USB Host+Gadget Emulator"; @@ -2439,7 +2440,7 @@ static int dummy_start_ss(struct dummy_hcd *dum_hcd) dum_hcd->rh_state = DUMMY_RH_RUNNING; dum_hcd->stream_en_ep = 0; INIT_LIST_HEAD(&dum_hcd->urbp_list); - dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET; + dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3; dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING; dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1; #ifdef CONFIG_USB_OTG diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 94a7669ccb80..009b6796f405 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3223,10 +3223,10 @@ static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len, if (usb_urb_dir_out(urb)) { len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs, seg->bounce_buf, new_buff_len, enqd_len); - if (len != seg->bounce_len) + if (len != new_buff_len) xhci_warn(xhci, "WARN Wrong bounce buffer write length: %zu != %d\n", - len, seg->bounce_len); + len, new_buff_len); seg->bounce_dma = dma_map_single(dev, seg->bounce_buf, max_pkt, DMA_TO_DEVICE); } else { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8893d1566765..465d7fd507ad 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -968,7 +968,7 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup) writel(command, &xhci->op_regs->command); xhci->broken_suspend = 0; if (xhci_handshake(&xhci->op_regs->status, - STS_SAVE, 0, 10 * 1000)) { + STS_SAVE, 0, 20 * 1000)) { /* * AMD SNPS xHC 3.0 occasionally does not clear the * SSS bit of USBSTS and when driver tries to poll @@ -1044,6 +1044,18 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) hibernated = true; if (!hibernated) { + /* + * Some controllers might lose power during suspend, so wait + * for controller not ready bit to clear, just as in xHC init. + */ + retval = xhci_handshake(&xhci->op_regs->status, + STS_CNR, 0, 10 * 1000 * 1000); + if (retval) { + xhci_warn(xhci, "Controller not ready at resume %d\n", + retval); + spin_unlock_irq(&xhci->lock); + return retval; + } /* step 1: restore register */ xhci_restore_registers(xhci); /* step 2: initialize command ring buffer */ @@ -4491,12 +4503,12 @@ static int xhci_update_timeout_for_endpoint(struct xhci_hcd *xhci, alt_timeout = xhci_call_host_update_timeout_for_endpoint(xhci, udev, desc, state, timeout); - /* If we found we can't enable hub-initiated LPM, or + /* If we found we can't enable hub-initiated LPM, and * the U1 or U2 exit latency was too high to allow - * device-initiated LPM as well, just stop searching. + * device-initiated LPM as well, then we will disable LPM + * for this device, so stop searching any further. */ - if (alt_timeout == USB3_LPM_DISABLED || - alt_timeout == USB3_LPM_DEVICE_INITIATED) { + if (alt_timeout == USB3_LPM_DISABLED) { *timeout = alt_timeout; return -E2BIG; } @@ -4607,10 +4619,12 @@ static u16 xhci_calculate_lpm_timeout(struct usb_hcd *hcd, if (intf->dev.driver) { driver = to_usb_driver(intf->dev.driver); if (driver && driver->disable_hub_initiated_lpm) { - dev_dbg(&udev->dev, "Hub-initiated %s disabled " - "at request of driver %s\n", - state_name, driver->name); - return xhci_get_timeout_no_hub_lpm(udev, state); + dev_dbg(&udev->dev, "Hub-initiated %s disabled at request of driver %s\n", + state_name, driver->name); + timeout = xhci_get_timeout_no_hub_lpm(udev, + state); + if (timeout == USB3_LPM_DISABLED) + return timeout; } } diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 0b21ba757bba..f5f68866b7fb 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -720,6 +720,10 @@ static int mts_usb_probe(struct usb_interface *intf, } + if (ep_in_current != &ep_in_set[2]) { + MTS_WARNING("couldn't find two input bulk endpoints. Bailing out.\n"); + return -ENODEV; + } if ( ep_out == -1 ) { MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" ); diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 0f9f25db9163..ad78de3cbfaa 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -46,16 +46,6 @@ config USB_SEVSEG To compile this driver as a module, choose M here: the module will be called usbsevseg. -config USB_RIO500 - tristate "USB Diamond Rio500 support" - help - Say Y here if you want to connect a USB Rio500 mp3 player to your - computer's USB port. Please read <file:Documentation/usb/rio.txt> - for more information. - - To compile this driver as a module, choose M here: the - module will be called rio500. - config USB_LEGOTOWER tristate "USB Lego Infrared Tower support" help diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 109f54f5b9aa..0d416eb624bb 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -17,7 +17,6 @@ obj-$(CONFIG_USB_ISIGHTFW) += isight_firmware.o obj-$(CONFIG_USB_LCD) += usblcd.o obj-$(CONFIG_USB_LD) += ldusb.o obj-$(CONFIG_USB_LEGOTOWER) += legousbtower.o -obj-$(CONFIG_USB_RIO500) += rio500.o obj-$(CONFIG_USB_TEST) += usbtest.o obj-$(CONFIG_USB_EHSET_TEST_FIXTURE) += ehset.o obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index 1c0ada75c35d..c8c8fa3f1f46 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -79,6 +79,7 @@ struct adu_device { char serial_number[8]; int open_count; /* number of times this port has been opened */ + unsigned long disconnected:1; char *read_buffer_primary; int read_buffer_length; @@ -120,7 +121,7 @@ static void adu_abort_transfers(struct adu_device *dev) { unsigned long flags; - if (dev->udev == NULL) + if (dev->disconnected) return; /* shutdown transfer */ @@ -150,6 +151,7 @@ static void adu_delete(struct adu_device *dev) kfree(dev->read_buffer_secondary); kfree(dev->interrupt_in_buffer); kfree(dev->interrupt_out_buffer); + usb_put_dev(dev->udev); kfree(dev); } @@ -243,7 +245,7 @@ static int adu_open(struct inode *inode, struct file *file) } dev = usb_get_intfdata(interface); - if (!dev || !dev->udev) { + if (!dev) { retval = -ENODEV; goto exit_no_device; } @@ -326,7 +328,7 @@ static int adu_release(struct inode *inode, struct file *file) } adu_release_internal(dev); - if (dev->udev == NULL) { + if (dev->disconnected) { /* the device was unplugged before the file was released */ if (!dev->open_count) /* ... and we're the last user */ adu_delete(dev); @@ -355,7 +357,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, return -ERESTARTSYS; /* verify that the device wasn't unplugged */ - if (dev->udev == NULL) { + if (dev->disconnected) { retval = -ENODEV; pr_err("No device or device unplugged %d\n", retval); goto exit; @@ -520,7 +522,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer, goto exit_nolock; /* verify that the device wasn't unplugged */ - if (dev->udev == NULL) { + if (dev->disconnected) { retval = -ENODEV; pr_err("No device or device unplugged %d\n", retval); goto exit; @@ -665,7 +667,7 @@ static int adu_probe(struct usb_interface *interface, mutex_init(&dev->mtx); spin_lock_init(&dev->buflock); - dev->udev = udev; + dev->udev = usb_get_dev(udev); init_waitqueue_head(&dev->read_wait); init_waitqueue_head(&dev->write_wait); @@ -761,19 +763,21 @@ error: static void adu_disconnect(struct usb_interface *interface) { struct adu_device *dev; - int minor; dev = usb_get_intfdata(interface); - mutex_lock(&dev->mtx); /* not interruptible */ - dev->udev = NULL; /* poison */ - minor = dev->minor; usb_deregister_dev(interface, &adu_class); - mutex_unlock(&dev->mtx); + + usb_poison_urb(dev->interrupt_in_urb); + usb_poison_urb(dev->interrupt_out_urb); mutex_lock(&adutux_mutex); usb_set_intfdata(interface, NULL); + mutex_lock(&dev->mtx); /* not interruptible */ + dev->disconnected = 1; + mutex_unlock(&dev->mtx); + /* if the device is not opened, then we clean up right now */ if (!dev->open_count) adu_delete(dev); diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c index abec6e604a62..eb0795c5ff7a 100644 --- a/drivers/usb/misc/chaoskey.c +++ b/drivers/usb/misc/chaoskey.c @@ -106,6 +106,7 @@ static void chaoskey_free(struct chaoskey *dev) usb_free_urb(dev->urb); kfree(dev->name); kfree(dev->buf); + usb_put_intf(dev->interface); kfree(dev); } } @@ -153,6 +154,8 @@ static int chaoskey_probe(struct usb_interface *interface, if (dev == NULL) goto out; + dev->interface = usb_get_intf(interface); + dev->buf = kmalloc(size, GFP_KERNEL); if (dev->buf == NULL) @@ -186,8 +189,6 @@ static int chaoskey_probe(struct usb_interface *interface, strcat(dev->name, udev->serial); } - dev->interface = interface; - dev->in_ep = in_ep; if (le16_to_cpu(udev->descriptor.idVendor) != ALEA_VENDOR_ID) diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 43bee6dad5c9..7f226cc3ef8a 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -87,6 +87,7 @@ struct iowarrior { char chip_serial[9]; /* the serial number string of the chip connected */ int report_size; /* number of bytes in a report */ u16 product_id; + struct usb_anchor submitted; }; /*--------------*/ @@ -246,6 +247,7 @@ static inline void iowarrior_delete(struct iowarrior *dev) kfree(dev->int_in_buffer); usb_free_urb(dev->int_in_urb); kfree(dev->read_queue); + usb_put_intf(dev->interface); kfree(dev); } @@ -427,11 +429,13 @@ static ssize_t iowarrior_write(struct file *file, retval = -EFAULT; goto error; } + usb_anchor_urb(int_out_urb, &dev->submitted); retval = usb_submit_urb(int_out_urb, GFP_KERNEL); if (retval) { dev_dbg(&dev->interface->dev, "submit error %d for urb nr.%d\n", retval, atomic_read(&dev->write_busy)); + usb_unanchor_urb(int_out_urb); goto error; } /* submit was ok */ @@ -768,11 +772,13 @@ static int iowarrior_probe(struct usb_interface *interface, init_waitqueue_head(&dev->write_wait); dev->udev = udev; - dev->interface = interface; + dev->interface = usb_get_intf(interface); iface_desc = interface->cur_altsetting; dev->product_id = le16_to_cpu(udev->descriptor.idProduct); + init_usb_anchor(&dev->submitted); + res = usb_find_last_int_in_endpoint(iface_desc, &dev->int_in_endpoint); if (res) { dev_err(&interface->dev, "no interrupt-in endpoint found\n"); @@ -870,8 +876,6 @@ static void iowarrior_disconnect(struct usb_interface *interface) dev = usb_get_intfdata(interface); mutex_lock(&iowarrior_open_disc_lock); usb_set_intfdata(interface, NULL); - /* prevent device read, write and ioctl */ - dev->present = 0; minor = dev->minor; mutex_unlock(&iowarrior_open_disc_lock); @@ -882,8 +886,7 @@ static void iowarrior_disconnect(struct usb_interface *interface) mutex_lock(&dev->mutex); /* prevent device read, write and ioctl */ - - mutex_unlock(&dev->mutex); + dev->present = 0; if (dev->opened) { /* There is a process that holds a filedescriptor to the device , @@ -891,10 +894,13 @@ static void iowarrior_disconnect(struct usb_interface *interface) Deleting the device is postponed until close() was called. */ usb_kill_urb(dev->int_in_urb); + usb_kill_anchored_urbs(&dev->submitted); wake_up_interruptible(&dev->read_wait); wake_up_interruptible(&dev->write_wait); + mutex_unlock(&dev->mutex); } else { /* no process is using the device, cleanup now */ + mutex_unlock(&dev->mutex); iowarrior_delete(dev); } diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 6635a3c990f6..fa5cf349ae19 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -157,6 +157,7 @@ MODULE_PARM_DESC(min_interrupt_out_interval, "Minimum interrupt out interval in struct ld_usb { struct mutex mutex; /* locks this structure */ struct usb_interface *intf; /* save off the usb interface pointer */ + unsigned long disconnected:1; int open_count; /* number of times this port has been opened */ @@ -196,12 +197,10 @@ static void ld_usb_abort_transfers(struct ld_usb *dev) /* shutdown transfer */ if (dev->interrupt_in_running) { dev->interrupt_in_running = 0; - if (dev->intf) - usb_kill_urb(dev->interrupt_in_urb); + usb_kill_urb(dev->interrupt_in_urb); } if (dev->interrupt_out_busy) - if (dev->intf) - usb_kill_urb(dev->interrupt_out_urb); + usb_kill_urb(dev->interrupt_out_urb); } /** @@ -209,8 +208,6 @@ static void ld_usb_abort_transfers(struct ld_usb *dev) */ static void ld_usb_delete(struct ld_usb *dev) { - ld_usb_abort_transfers(dev); - /* free data structures */ usb_free_urb(dev->interrupt_in_urb); usb_free_urb(dev->interrupt_out_urb); @@ -266,7 +263,7 @@ static void ld_usb_interrupt_in_callback(struct urb *urb) resubmit: /* resubmit if we're still running */ - if (dev->interrupt_in_running && !dev->buffer_overflow && dev->intf) { + if (dev->interrupt_in_running && !dev->buffer_overflow) { retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC); if (retval) { dev_err(&dev->intf->dev, @@ -395,7 +392,7 @@ static int ld_usb_release(struct inode *inode, struct file *file) retval = -ENODEV; goto unlock_exit; } - if (dev->intf == NULL) { + if (dev->disconnected) { /* the device was unplugged before the file was released */ mutex_unlock(&dev->mutex); /* unlock here as ld_usb_delete frees dev */ @@ -426,7 +423,7 @@ static unsigned int ld_usb_poll(struct file *file, poll_table *wait) dev = file->private_data; - if (!dev->intf) + if (dev->disconnected) return POLLERR | POLLHUP; poll_wait(file, &dev->read_wait, wait); @@ -465,7 +462,7 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count, } /* verify that the device wasn't unplugged */ - if (dev->intf == NULL) { + if (dev->disconnected) { retval = -ENODEV; printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval); goto unlock_exit; @@ -545,7 +542,7 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer, } /* verify that the device wasn't unplugged */ - if (dev->intf == NULL) { + if (dev->disconnected) { retval = -ENODEV; printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval); goto unlock_exit; @@ -762,6 +759,9 @@ static void ld_usb_disconnect(struct usb_interface *intf) /* give back our minor */ usb_deregister_dev(intf, &ld_usb_class); + usb_poison_urb(dev->interrupt_in_urb); + usb_poison_urb(dev->interrupt_out_urb); + mutex_lock(&dev->mutex); /* if the device is not opened, then we clean up right now */ @@ -769,7 +769,7 @@ static void ld_usb_disconnect(struct usb_interface *intf) mutex_unlock(&dev->mutex); ld_usb_delete(dev); } else { - dev->intf = NULL; + dev->disconnected = 1; /* wake up pollers */ wake_up_interruptible_all(&dev->read_wait); wake_up_interruptible_all(&dev->write_wait); diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 5628f678ab59..155615aadc9c 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -183,7 +183,6 @@ static const struct usb_device_id tower_table[] = { }; MODULE_DEVICE_TABLE (usb, tower_table); -static DEFINE_MUTEX(open_disc_mutex); #define LEGO_USB_TOWER_MINOR_BASE 160 @@ -195,6 +194,7 @@ struct lego_usb_tower { unsigned char minor; /* the starting minor number for this device */ int open_count; /* number of times this port has been opened */ + unsigned long disconnected:1; char* read_buffer; size_t read_buffer_length; /* this much came in */ @@ -294,14 +294,13 @@ static inline void lego_usb_tower_debug_data(struct device *dev, */ static inline void tower_delete (struct lego_usb_tower *dev) { - tower_abort_transfers (dev); - /* free data structures */ usb_free_urb(dev->interrupt_in_urb); usb_free_urb(dev->interrupt_out_urb); kfree (dev->read_buffer); kfree (dev->interrupt_in_buffer); kfree (dev->interrupt_out_buffer); + usb_put_dev(dev->udev); kfree (dev); } @@ -336,18 +335,14 @@ static int tower_open (struct inode *inode, struct file *file) goto exit; } - mutex_lock(&open_disc_mutex); dev = usb_get_intfdata(interface); - if (!dev) { - mutex_unlock(&open_disc_mutex); retval = -ENODEV; goto exit; } /* lock this device */ if (mutex_lock_interruptible(&dev->lock)) { - mutex_unlock(&open_disc_mutex); retval = -ERESTARTSYS; goto exit; } @@ -355,12 +350,9 @@ static int tower_open (struct inode *inode, struct file *file) /* allow opening only once */ if (dev->open_count) { - mutex_unlock(&open_disc_mutex); retval = -EBUSY; goto unlock_exit; } - dev->open_count = 1; - mutex_unlock(&open_disc_mutex); /* reset the tower */ result = usb_control_msg (dev->udev, @@ -400,13 +392,14 @@ static int tower_open (struct inode *inode, struct file *file) dev_err(&dev->udev->dev, "Couldn't submit interrupt_in_urb %d\n", retval); dev->interrupt_in_running = 0; - dev->open_count = 0; goto unlock_exit; } /* save device in the file's private structure */ file->private_data = dev; + dev->open_count = 1; + unlock_exit: mutex_unlock(&dev->lock); @@ -427,10 +420,9 @@ static int tower_release (struct inode *inode, struct file *file) if (dev == NULL) { retval = -ENODEV; - goto exit_nolock; + goto exit; } - mutex_lock(&open_disc_mutex); if (mutex_lock_interruptible(&dev->lock)) { retval = -ERESTARTSYS; goto exit; @@ -442,7 +434,8 @@ static int tower_release (struct inode *inode, struct file *file) retval = -ENODEV; goto unlock_exit; } - if (dev->udev == NULL) { + + if (dev->disconnected) { /* the device was unplugged before the file was released */ /* unlock here as tower_delete frees dev */ @@ -460,10 +453,7 @@ static int tower_release (struct inode *inode, struct file *file) unlock_exit: mutex_unlock(&dev->lock); - exit: - mutex_unlock(&open_disc_mutex); -exit_nolock: return retval; } @@ -481,10 +471,9 @@ static void tower_abort_transfers (struct lego_usb_tower *dev) if (dev->interrupt_in_running) { dev->interrupt_in_running = 0; mb(); - if (dev->udev) - usb_kill_urb (dev->interrupt_in_urb); + usb_kill_urb(dev->interrupt_in_urb); } - if (dev->interrupt_out_busy && dev->udev) + if (dev->interrupt_out_busy) usb_kill_urb(dev->interrupt_out_urb); } @@ -520,7 +509,7 @@ static unsigned int tower_poll (struct file *file, poll_table *wait) dev = file->private_data; - if (!dev->udev) + if (dev->disconnected) return POLLERR | POLLHUP; poll_wait(file, &dev->read_wait, wait); @@ -567,7 +556,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count, } /* verify that the device wasn't unplugged */ - if (dev->udev == NULL) { + if (dev->disconnected) { retval = -ENODEV; pr_err("No device or device unplugged %d\n", retval); goto unlock_exit; @@ -653,7 +642,7 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t } /* verify that the device wasn't unplugged */ - if (dev->udev == NULL) { + if (dev->disconnected) { retval = -ENODEV; pr_err("No device or device unplugged %d\n", retval); goto unlock_exit; @@ -762,7 +751,7 @@ static void tower_interrupt_in_callback (struct urb *urb) resubmit: /* resubmit if we're still running */ - if (dev->interrupt_in_running && dev->udev) { + if (dev->interrupt_in_running) { retval = usb_submit_urb (dev->interrupt_in_urb, GFP_ATOMIC); if (retval) dev_err(&dev->udev->dev, @@ -825,8 +814,9 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device mutex_init(&dev->lock); - dev->udev = udev; + dev->udev = usb_get_dev(udev); dev->open_count = 0; + dev->disconnected = 0; dev->read_buffer = NULL; dev->read_buffer_length = 0; @@ -894,8 +884,10 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device get_version_reply, sizeof(*get_version_reply), 1000); - if (result < 0) { - dev_err(idev, "LEGO USB Tower get version control request failed\n"); + if (result < sizeof(*get_version_reply)) { + if (result >= 0) + result = -EIO; + dev_err(idev, "get version request failed: %d\n", result); retval = result; goto error; } @@ -913,7 +905,6 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device if (retval) { /* something prevented us from registering this driver */ dev_err(idev, "Not able to get a minor for this device.\n"); - usb_set_intfdata (interface, NULL); goto error; } dev->minor = interface->minor; @@ -945,23 +936,24 @@ static void tower_disconnect (struct usb_interface *interface) int minor; dev = usb_get_intfdata (interface); - mutex_lock(&open_disc_mutex); - usb_set_intfdata (interface, NULL); minor = dev->minor; - /* give back our minor */ + /* give back our minor and prevent further open() */ usb_deregister_dev (interface, &tower_class); + /* stop I/O */ + usb_poison_urb(dev->interrupt_in_urb); + usb_poison_urb(dev->interrupt_out_urb); + mutex_lock(&dev->lock); - mutex_unlock(&open_disc_mutex); /* if the device is not opened, then we clean up right now */ if (!dev->open_count) { mutex_unlock(&dev->lock); tower_delete (dev); } else { - dev->udev = NULL; + dev->disconnected = 1; /* wake up pollers */ wake_up_interruptible_all(&dev->read_wait); wake_up_interruptible_all(&dev->write_wait); diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c deleted file mode 100644 index c652a4fdc546..000000000000 --- a/drivers/usb/misc/rio500.c +++ /dev/null @@ -1,574 +0,0 @@ -/* -*- linux-c -*- */ - -/* - * Driver for USB Rio 500 - * - * Cesar Miquel (miquel@df.uba.ar) - * - * based on hp_scanner.c by David E. Nelson (dnelson@jump.net) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Based upon mouse.c (Brad Keryan) and printer.c (Michael Gee). - * - * Changelog: - * 30/05/2003 replaced lock/unlock kernel with up/down - * Daniele Bellucci bellucda@tiscali.it - * */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/sched/signal.h> -#include <linux/mutex.h> -#include <linux/errno.h> -#include <linux/random.h> -#include <linux/poll.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include <linux/usb.h> -#include <linux/wait.h> - -#include "rio500_usb.h" - -#define DRIVER_AUTHOR "Cesar Miquel <miquel@df.uba.ar>" -#define DRIVER_DESC "USB Rio 500 driver" - -#define RIO_MINOR 64 - -/* stall/wait timeout for rio */ -#define NAK_TIMEOUT (HZ) - -#define IBUF_SIZE 0x1000 - -/* Size of the rio buffer */ -#define OBUF_SIZE 0x10000 - -struct rio_usb_data { - struct usb_device *rio_dev; /* init: probe_rio */ - unsigned int ifnum; /* Interface number of the USB device */ - int isopen; /* nz if open */ - int present; /* Device is present on the bus */ - char *obuf, *ibuf; /* transfer buffers */ - char bulk_in_ep, bulk_out_ep; /* Endpoint assignments */ - wait_queue_head_t wait_q; /* for timeouts */ - struct mutex lock; /* general race avoidance */ -}; - -static DEFINE_MUTEX(rio500_mutex); -static struct rio_usb_data rio_instance; - -static int open_rio(struct inode *inode, struct file *file) -{ - struct rio_usb_data *rio = &rio_instance; - - /* against disconnect() */ - mutex_lock(&rio500_mutex); - mutex_lock(&(rio->lock)); - - if (rio->isopen || !rio->present) { - mutex_unlock(&(rio->lock)); - mutex_unlock(&rio500_mutex); - return -EBUSY; - } - rio->isopen = 1; - - init_waitqueue_head(&rio->wait_q); - - mutex_unlock(&(rio->lock)); - - dev_info(&rio->rio_dev->dev, "Rio opened.\n"); - mutex_unlock(&rio500_mutex); - - return 0; -} - -static int close_rio(struct inode *inode, struct file *file) -{ - struct rio_usb_data *rio = &rio_instance; - - /* against disconnect() */ - mutex_lock(&rio500_mutex); - mutex_lock(&(rio->lock)); - - rio->isopen = 0; - if (!rio->present) { - /* cleanup has been delayed */ - kfree(rio->ibuf); - kfree(rio->obuf); - rio->ibuf = NULL; - rio->obuf = NULL; - } else { - dev_info(&rio->rio_dev->dev, "Rio closed.\n"); - } - mutex_unlock(&(rio->lock)); - mutex_unlock(&rio500_mutex); - return 0; -} - -static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) -{ - struct RioCommand rio_cmd; - struct rio_usb_data *rio = &rio_instance; - void __user *data; - unsigned char *buffer; - int result, requesttype; - int retries; - int retval=0; - - mutex_lock(&(rio->lock)); - /* Sanity check to make sure rio is connected, powered, etc */ - if (rio->present == 0 || rio->rio_dev == NULL) { - retval = -ENODEV; - goto err_out; - } - - switch (cmd) { - case RIO_RECV_COMMAND: - data = (void __user *) arg; - if (data == NULL) - break; - if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) { - retval = -EFAULT; - goto err_out; - } - if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) { - retval = -EINVAL; - goto err_out; - } - buffer = (unsigned char *) __get_free_page(GFP_KERNEL); - if (buffer == NULL) { - retval = -ENOMEM; - goto err_out; - } - if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) { - retval = -EFAULT; - free_page((unsigned long) buffer); - goto err_out; - } - - requesttype = rio_cmd.requesttype | USB_DIR_IN | - USB_TYPE_VENDOR | USB_RECIP_DEVICE; - dev_dbg(&rio->rio_dev->dev, - "sending command:reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n", - requesttype, rio_cmd.request, rio_cmd.value, - rio_cmd.index, rio_cmd.length); - /* Send rio control message */ - retries = 3; - while (retries) { - result = usb_control_msg(rio->rio_dev, - usb_rcvctrlpipe(rio-> rio_dev, 0), - rio_cmd.request, - requesttype, - rio_cmd.value, - rio_cmd.index, buffer, - rio_cmd.length, - jiffies_to_msecs(rio_cmd.timeout)); - if (result == -ETIMEDOUT) - retries--; - else if (result < 0) { - dev_err(&rio->rio_dev->dev, - "Error executing ioctrl. code = %d\n", - result); - retries = 0; - } else { - dev_dbg(&rio->rio_dev->dev, - "Executed ioctl. Result = %d (data=%02x)\n", - result, buffer[0]); - if (copy_to_user(rio_cmd.buffer, buffer, - rio_cmd.length)) { - free_page((unsigned long) buffer); - retval = -EFAULT; - goto err_out; - } - retries = 0; - } - - /* rio_cmd.buffer contains a raw stream of single byte - data which has been returned from rio. Data is - interpreted at application level. For data that - will be cast to data types longer than 1 byte, data - will be little_endian and will potentially need to - be swapped at the app level */ - - } - free_page((unsigned long) buffer); - break; - - case RIO_SEND_COMMAND: - data = (void __user *) arg; - if (data == NULL) - break; - if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) { - retval = -EFAULT; - goto err_out; - } - if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) { - retval = -EINVAL; - goto err_out; - } - buffer = (unsigned char *) __get_free_page(GFP_KERNEL); - if (buffer == NULL) { - retval = -ENOMEM; - goto err_out; - } - if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) { - free_page((unsigned long)buffer); - retval = -EFAULT; - goto err_out; - } - - requesttype = rio_cmd.requesttype | USB_DIR_OUT | - USB_TYPE_VENDOR | USB_RECIP_DEVICE; - dev_dbg(&rio->rio_dev->dev, - "sending command: reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n", - requesttype, rio_cmd.request, rio_cmd.value, - rio_cmd.index, rio_cmd.length); - /* Send rio control message */ - retries = 3; - while (retries) { - result = usb_control_msg(rio->rio_dev, - usb_sndctrlpipe(rio-> rio_dev, 0), - rio_cmd.request, - requesttype, - rio_cmd.value, - rio_cmd.index, buffer, - rio_cmd.length, - jiffies_to_msecs(rio_cmd.timeout)); - if (result == -ETIMEDOUT) - retries--; - else if (result < 0) { - dev_err(&rio->rio_dev->dev, - "Error executing ioctrl. code = %d\n", - result); - retries = 0; - } else { - dev_dbg(&rio->rio_dev->dev, - "Executed ioctl. Result = %d\n", result); - retries = 0; - - } - - } - free_page((unsigned long) buffer); - break; - - default: - retval = -ENOTTY; - break; - } - - -err_out: - mutex_unlock(&(rio->lock)); - return retval; -} - -static ssize_t -write_rio(struct file *file, const char __user *buffer, - size_t count, loff_t * ppos) -{ - DEFINE_WAIT(wait); - struct rio_usb_data *rio = &rio_instance; - - unsigned long copy_size; - unsigned long bytes_written = 0; - unsigned int partial; - - int result = 0; - int maxretry; - int errn = 0; - int intr; - - intr = mutex_lock_interruptible(&(rio->lock)); - if (intr) - return -EINTR; - /* Sanity check to make sure rio is connected, powered, etc */ - if (rio->present == 0 || rio->rio_dev == NULL) { - mutex_unlock(&(rio->lock)); - return -ENODEV; - } - - - - do { - unsigned long thistime; - char *obuf = rio->obuf; - - thistime = copy_size = - (count >= OBUF_SIZE) ? OBUF_SIZE : count; - if (copy_from_user(rio->obuf, buffer, copy_size)) { - errn = -EFAULT; - goto error; - } - maxretry = 5; - while (thistime) { - if (!rio->rio_dev) { - errn = -ENODEV; - goto error; - } - if (signal_pending(current)) { - mutex_unlock(&(rio->lock)); - return bytes_written ? bytes_written : -EINTR; - } - - result = usb_bulk_msg(rio->rio_dev, - usb_sndbulkpipe(rio->rio_dev, 2), - obuf, thistime, &partial, 5000); - - dev_dbg(&rio->rio_dev->dev, - "write stats: result:%d thistime:%lu partial:%u\n", - result, thistime, partial); - - if (result == -ETIMEDOUT) { /* NAK - so hold for a while */ - if (!maxretry--) { - errn = -ETIME; - goto error; - } - prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE); - schedule_timeout(NAK_TIMEOUT); - finish_wait(&rio->wait_q, &wait); - continue; - } else if (!result && partial) { - obuf += partial; - thistime -= partial; - } else - break; - } - if (result) { - dev_err(&rio->rio_dev->dev, "Write Whoops - %x\n", - result); - errn = -EIO; - goto error; - } - bytes_written += copy_size; - count -= copy_size; - buffer += copy_size; - } while (count > 0); - - mutex_unlock(&(rio->lock)); - - return bytes_written ? bytes_written : -EIO; - -error: - mutex_unlock(&(rio->lock)); - return errn; -} - -static ssize_t -read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) -{ - DEFINE_WAIT(wait); - struct rio_usb_data *rio = &rio_instance; - ssize_t read_count; - unsigned int partial; - int this_read; - int result; - int maxretry = 10; - char *ibuf; - int intr; - - intr = mutex_lock_interruptible(&(rio->lock)); - if (intr) - return -EINTR; - /* Sanity check to make sure rio is connected, powered, etc */ - if (rio->present == 0 || rio->rio_dev == NULL) { - mutex_unlock(&(rio->lock)); - return -ENODEV; - } - - ibuf = rio->ibuf; - - read_count = 0; - - - while (count > 0) { - if (signal_pending(current)) { - mutex_unlock(&(rio->lock)); - return read_count ? read_count : -EINTR; - } - if (!rio->rio_dev) { - mutex_unlock(&(rio->lock)); - return -ENODEV; - } - this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count; - - result = usb_bulk_msg(rio->rio_dev, - usb_rcvbulkpipe(rio->rio_dev, 1), - ibuf, this_read, &partial, - 8000); - - dev_dbg(&rio->rio_dev->dev, - "read stats: result:%d this_read:%u partial:%u\n", - result, this_read, partial); - - if (partial) { - count = this_read = partial; - } else if (result == -ETIMEDOUT || result == 15) { /* FIXME: 15 ??? */ - if (!maxretry--) { - mutex_unlock(&(rio->lock)); - dev_err(&rio->rio_dev->dev, - "read_rio: maxretry timeout\n"); - return -ETIME; - } - prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE); - schedule_timeout(NAK_TIMEOUT); - finish_wait(&rio->wait_q, &wait); - continue; - } else if (result != -EREMOTEIO) { - mutex_unlock(&(rio->lock)); - dev_err(&rio->rio_dev->dev, - "Read Whoops - result:%d partial:%u this_read:%u\n", - result, partial, this_read); - return -EIO; - } else { - mutex_unlock(&(rio->lock)); - return (0); - } - - if (this_read) { - if (copy_to_user(buffer, ibuf, this_read)) { - mutex_unlock(&(rio->lock)); - return -EFAULT; - } - count -= this_read; - read_count += this_read; - buffer += this_read; - } - } - mutex_unlock(&(rio->lock)); - return read_count; -} - -static const struct file_operations usb_rio_fops = { - .owner = THIS_MODULE, - .read = read_rio, - .write = write_rio, - .unlocked_ioctl = ioctl_rio, - .open = open_rio, - .release = close_rio, - .llseek = noop_llseek, -}; - -static struct usb_class_driver usb_rio_class = { - .name = "rio500%d", - .fops = &usb_rio_fops, - .minor_base = RIO_MINOR, -}; - -static int probe_rio(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *dev = interface_to_usbdev(intf); - struct rio_usb_data *rio = &rio_instance; - int retval = 0; - - mutex_lock(&rio500_mutex); - if (rio->present) { - dev_info(&intf->dev, "Second USB Rio at address %d refused\n", dev->devnum); - retval = -EBUSY; - goto bail_out; - } else { - dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum); - } - - retval = usb_register_dev(intf, &usb_rio_class); - if (retval) { - dev_err(&dev->dev, - "Not able to get a minor for this device.\n"); - retval = -ENOMEM; - goto bail_out; - } - - rio->rio_dev = dev; - - if (!(rio->obuf = kmalloc(OBUF_SIZE, GFP_KERNEL))) { - dev_err(&dev->dev, - "probe_rio: Not enough memory for the output buffer\n"); - usb_deregister_dev(intf, &usb_rio_class); - retval = -ENOMEM; - goto bail_out; - } - dev_dbg(&intf->dev, "obuf address:%p\n", rio->obuf); - - if (!(rio->ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL))) { - dev_err(&dev->dev, - "probe_rio: Not enough memory for the input buffer\n"); - usb_deregister_dev(intf, &usb_rio_class); - kfree(rio->obuf); - retval = -ENOMEM; - goto bail_out; - } - dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf); - - mutex_init(&(rio->lock)); - - usb_set_intfdata (intf, rio); - rio->present = 1; -bail_out: - mutex_unlock(&rio500_mutex); - - return retval; -} - -static void disconnect_rio(struct usb_interface *intf) -{ - struct rio_usb_data *rio = usb_get_intfdata (intf); - - usb_set_intfdata (intf, NULL); - mutex_lock(&rio500_mutex); - if (rio) { - usb_deregister_dev(intf, &usb_rio_class); - - mutex_lock(&(rio->lock)); - if (rio->isopen) { - rio->isopen = 0; - /* better let it finish - the release will do whats needed */ - rio->rio_dev = NULL; - mutex_unlock(&(rio->lock)); - mutex_unlock(&rio500_mutex); - return; - } - kfree(rio->ibuf); - kfree(rio->obuf); - - dev_info(&intf->dev, "USB Rio disconnected.\n"); - - rio->present = 0; - mutex_unlock(&(rio->lock)); - } - mutex_unlock(&rio500_mutex); -} - -static const struct usb_device_id rio_table[] = { - { USB_DEVICE(0x0841, 1) }, /* Rio 500 */ - { } /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE (usb, rio_table); - -static struct usb_driver rio_driver = { - .name = "rio500", - .probe = probe_rio, - .disconnect = disconnect_rio, - .id_table = rio_table, -}; - -module_usb_driver(rio_driver); - -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_LICENSE("GPL"); - diff --git a/drivers/usb/misc/rio500_usb.h b/drivers/usb/misc/rio500_usb.h deleted file mode 100644 index 359abc98e706..000000000000 --- a/drivers/usb/misc/rio500_usb.h +++ /dev/null @@ -1,37 +0,0 @@ -/* ---------------------------------------------------------------------- - - Copyright (C) 2000 Cesar Miquel (miquel@df.uba.ar) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - ---------------------------------------------------------------------- */ - - - -#define RIO_SEND_COMMAND 0x1 -#define RIO_RECV_COMMAND 0x2 - -#define RIO_DIR_OUT 0x0 -#define RIO_DIR_IN 0x1 - -struct RioCommand { - short length; - int request; - int requesttype; - int value; - int index; - void __user *buffer; - int timeout; -}; diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 0f5ad896c7e3..6a50e22e0a72 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -17,6 +17,7 @@ #include <linux/slab.h> #include <linux/errno.h> #include <linux/mutex.h> +#include <linux/rwsem.h> #include <linux/uaccess.h> #include <linux/usb.h> @@ -56,6 +57,8 @@ struct usb_lcd { using up all RAM */ struct usb_anchor submitted; /* URBs to wait for before suspend */ + struct rw_semaphore io_rwsem; + unsigned long disconnected:1; }; #define to_lcd_dev(d) container_of(d, struct usb_lcd, kref) @@ -141,6 +144,13 @@ static ssize_t lcd_read(struct file *file, char __user * buffer, dev = file->private_data; + down_read(&dev->io_rwsem); + + if (dev->disconnected) { + retval = -ENODEV; + goto out_up_io; + } + /* do a blocking bulk read to get data from the device */ retval = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, @@ -157,6 +167,9 @@ static ssize_t lcd_read(struct file *file, char __user * buffer, retval = bytes_read; } +out_up_io: + up_read(&dev->io_rwsem); + return retval; } @@ -236,11 +249,18 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, if (r < 0) return -EINTR; + down_read(&dev->io_rwsem); + + if (dev->disconnected) { + retval = -ENODEV; + goto err_up_io; + } + /* create a urb, and a buffer for it, and copy the data to the urb */ urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) { retval = -ENOMEM; - goto err_no_buf; + goto err_up_io; } buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL, @@ -277,6 +297,7 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, the USB core will eventually free it entirely */ usb_free_urb(urb); + up_read(&dev->io_rwsem); exit: return count; error_unanchor: @@ -284,7 +305,8 @@ error_unanchor: error: usb_free_coherent(dev->udev, count, buf, urb->transfer_dma); usb_free_urb(urb); -err_no_buf: +err_up_io: + up_read(&dev->io_rwsem); up(&dev->limit_sem); return retval; } @@ -324,6 +346,7 @@ static int lcd_probe(struct usb_interface *interface, kref_init(&dev->kref); sema_init(&dev->limit_sem, USB_LCD_CONCURRENT_WRITES); + init_rwsem(&dev->io_rwsem); init_usb_anchor(&dev->submitted); dev->udev = usb_get_dev(interface_to_usbdev(interface)); @@ -421,6 +444,12 @@ static void lcd_disconnect(struct usb_interface *interface) /* give back our minor */ usb_deregister_dev(interface, &lcd_class); + down_write(&dev->io_rwsem); + dev->disconnected = 1; + up_write(&dev->io_rwsem); + + usb_kill_anchored_urbs(&dev->submitted); + /* decrement our usage count */ kref_put(&dev->kref, lcd_delete); diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 081570677f24..ec42f6b75564 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -64,6 +64,7 @@ struct usb_yurex { struct kref kref; struct mutex io_mutex; + unsigned long disconnected:1; struct fasync_struct *async_queue; wait_queue_head_t waitq; @@ -111,6 +112,7 @@ static void yurex_delete(struct kref *kref) dev->int_buffer, dev->urb->transfer_dma); usb_free_urb(dev->urb); } + usb_put_intf(dev->interface); usb_put_dev(dev->udev); kfree(dev); } @@ -136,6 +138,7 @@ static void yurex_interrupt(struct urb *urb) switch (status) { case 0: /*success*/ break; + /* The device is terminated or messed up, give up */ case -EOVERFLOW: dev_err(&dev->interface->dev, "%s - overflow with length %d, actual length is %d\n", @@ -144,12 +147,13 @@ static void yurex_interrupt(struct urb *urb) case -ENOENT: case -ESHUTDOWN: case -EILSEQ: - /* The device is terminated, clean up */ + case -EPROTO: + case -ETIME: return; default: dev_err(&dev->interface->dev, "%s - unknown status received: %d\n", __func__, status); - goto exit; + return; } /* handle received message */ @@ -181,7 +185,6 @@ static void yurex_interrupt(struct urb *urb) break; } -exit: retval = usb_submit_urb(dev->urb, GFP_ATOMIC); if (retval) { dev_err(&dev->interface->dev, "%s - usb_submit_urb failed: %d\n", @@ -208,7 +211,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ init_waitqueue_head(&dev->waitq); dev->udev = usb_get_dev(interface_to_usbdev(interface)); - dev->interface = interface; + dev->interface = usb_get_intf(interface); /* set up the endpoint information */ iface_desc = interface->cur_altsetting; @@ -319,8 +322,9 @@ static void yurex_disconnect(struct usb_interface *interface) /* prevent more I/O from starting */ usb_poison_urb(dev->urb); + usb_poison_urb(dev->cntl_urb); mutex_lock(&dev->io_mutex); - dev->interface = NULL; + dev->disconnected = 1; mutex_unlock(&dev->io_mutex); /* wakeup waiters */ @@ -408,7 +412,7 @@ static ssize_t yurex_read(struct file *file, char __user *buffer, size_t count, dev = file->private_data; mutex_lock(&dev->io_mutex); - if (!dev->interface) { /* already disconnected */ + if (dev->disconnected) { /* already disconnected */ mutex_unlock(&dev->io_mutex); return -ENODEV; } @@ -443,7 +447,7 @@ static ssize_t yurex_write(struct file *file, const char __user *user_buffer, goto error; mutex_lock(&dev->io_mutex); - if (!dev->interface) { /* already disconnected */ + if (dev->disconnected) { /* already disconnected */ mutex_unlock(&dev->io_mutex); retval = -ENODEV; goto error; diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h index 8c5fc12ad778..b8620aa6b72e 100644 --- a/drivers/usb/renesas_usbhs/common.h +++ b/drivers/usb/renesas_usbhs/common.h @@ -213,6 +213,7 @@ struct usbhs_priv; /* DCPCTR */ #define BSTS (1 << 15) /* Buffer Status */ #define SUREQ (1 << 14) /* Sending SETUP Token */ +#define INBUFM (1 << 14) /* (PIPEnCTR) Transfer Buffer Monitor */ #define CSSTS (1 << 12) /* CSSTS Status */ #define ACLRM (1 << 9) /* Buffer Auto-Clear Mode */ #define SQCLR (1 << 8) /* Toggle Bit Clear */ diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index b6d9308d43ba..4a486fa5473e 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -98,7 +98,7 @@ static void __usbhsf_pkt_del(struct usbhs_pkt *pkt) list_del_init(&pkt->node); } -static struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe) +struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe) { return list_first_entry_or_null(&pipe->list, struct usbhs_pkt, node); } diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h index 8b98507d7abc..c1fb39252b23 100644 --- a/drivers/usb/renesas_usbhs/fifo.h +++ b/drivers/usb/renesas_usbhs/fifo.h @@ -106,5 +106,6 @@ void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt, void *buf, int len, int zero, int sequence); struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt); void usbhs_pkt_start(struct usbhs_pipe *pipe); +struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe); #endif /* RENESAS_USB_FIFO_H */ diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index c068b673420b..0dedb0d91dcc 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -729,8 +729,7 @@ static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge) struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); struct device *dev = usbhsg_gpriv_to_dev(gpriv); unsigned long flags; - - usbhsg_pipe_disable(uep); + int ret = 0; dev_dbg(dev, "set halt %d (pipe %d)\n", halt, usbhs_pipe_number(pipe)); @@ -738,6 +737,18 @@ static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge) /******************** spin lock ********************/ usbhs_lock(priv, flags); + /* + * According to usb_ep_set_halt()'s description, this function should + * return -EAGAIN if the IN endpoint has any queue or data. Note + * that the usbhs_pipe_is_dir_in() returns false if the pipe is an + * IN endpoint in the gadget mode. + */ + if (!usbhs_pipe_is_dir_in(pipe) && (__usbhsf_pkt_get(pipe) || + usbhs_pipe_contains_transmittable_data(pipe))) { + ret = -EAGAIN; + goto out; + } + if (halt) usbhs_pipe_stall(pipe); else @@ -748,10 +759,11 @@ static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge) else usbhsg_status_clr(gpriv, USBHSG_STATUS_WEDGE); +out: usbhs_unlock(priv, flags); /******************** spin unlock ******************/ - return 0; + return ret; } static int usbhsg_ep_set_halt(struct usb_ep *ep, int value) diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c index d811f0550c04..98ed6fcacd36 100644 --- a/drivers/usb/renesas_usbhs/pipe.c +++ b/drivers/usb/renesas_usbhs/pipe.c @@ -286,6 +286,21 @@ int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe) return -EBUSY; } +bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe) +{ + u16 val; + + /* Do not support for DCP pipe */ + if (usbhs_pipe_is_dcp(pipe)) + return false; + + val = usbhsp_pipectrl_get(pipe); + if (val & INBUFM) + return true; + + return false; +} + /* * PID ctrl */ diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h index 95185fdb29b1..e4144704ee02 100644 --- a/drivers/usb/renesas_usbhs/pipe.h +++ b/drivers/usb/renesas_usbhs/pipe.h @@ -90,6 +90,7 @@ void usbhs_pipe_init(struct usbhs_priv *priv, int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe); void usbhs_pipe_clear(struct usbhs_pipe *pipe); int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe); +bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe); void usbhs_pipe_enable(struct usbhs_pipe *pipe); void usbhs_pipe_disable(struct usbhs_pipe *pipe); void usbhs_pipe_stall(struct usbhs_pipe *pipe); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d2349c094767..8b5c99df0f2b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1025,6 +1025,9 @@ static const struct usb_device_id id_table_combined[] = { /* EZPrototypes devices */ { USB_DEVICE(EZPROTOTYPES_VID, HJELMSLUND_USB485_ISO_PID) }, { USB_DEVICE_INTERFACE_NUMBER(UNJO_VID, UNJO_ISODEBUG_V1_PID, 1) }, + /* Sienna devices */ + { USB_DEVICE(FTDI_VID, FTDI_SIENNA_PID) }, + { USB_DEVICE(ECHELON_VID, ECHELON_U20_PID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index f12d806220b4..22d66217cb41 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -39,6 +39,9 @@ #define FTDI_LUMEL_PD12_PID 0x6002 +/* Sienna Serial Interface by Secyourit GmbH */ +#define FTDI_SIENNA_PID 0x8348 + /* Cyber Cortex AV by Fabulous Silicon (http://fabuloussilicon.com) */ #define CYBER_CORTEX_AV_PID 0x8698 @@ -689,6 +692,12 @@ #define BANDB_ZZ_PROG1_USB_PID 0xBA02 /* + * Echelon USB Serial Interface + */ +#define ECHELON_VID 0x0920 +#define ECHELON_U20_PID 0x7500 + +/* * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI */ #define INTREPID_VID 0x093C diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 5662d324edd2..2c5a53bdccd4 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1745,8 +1745,8 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint, ep_desc = find_ep(serial, endpoint); if (!ep_desc) { - /* leak the urb, something's wrong and the callers don't care */ - return urb; + usb_free_urb(urb); + return NULL; } if (usb_endpoint_xfer_int(ep_desc)) { ep_type_name = "INT"; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 959f462c6f72..b9fad046828d 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -422,6 +422,7 @@ static void option_instat_callback(struct urb *urb); #define CINTERION_PRODUCT_PH8_AUDIO 0x0083 #define CINTERION_PRODUCT_AHXX_2RMNET 0x0084 #define CINTERION_PRODUCT_AHXX_AUDIO 0x0085 +#define CINTERION_PRODUCT_CLS8 0x00b0 /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c @@ -1157,6 +1158,14 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff), .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1050, 0xff), /* Telit FN980 (rmnet) */ + .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1051, 0xff), /* Telit FN980 (MBIM) */ + .driver_info = NCTRL(0) | RSVD(1) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1052, 0xff), /* Telit FN980 (RNDIS) */ + .driver_info = NCTRL(2) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1053, 0xff), /* Telit FN980 (ECM) */ + .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), @@ -1850,6 +1859,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_2RMNET, 0xff) }, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_CLS8, 0xff), + .driver_info = RSVD(0) | RSVD(4) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) }, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index bb34f9f7eaf4..8115b7cccf1a 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -314,10 +314,7 @@ static void serial_cleanup(struct tty_struct *tty) serial = port->serial; owner = serial->type->driver.owner; - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) - usb_autopm_put_interface(serial->interface); - mutex_unlock(&serial->disc_mutex); + usb_autopm_put_interface(serial->interface); usb_serial_put(serial); module_put(owner); diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index bb0bd732e29a..7140d06ae04f 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -63,6 +63,7 @@ struct usb_skel { spinlock_t err_lock; /* lock for errors */ struct kref kref; struct mutex io_mutex; /* synchronize I/O with disconnect */ + unsigned long disconnected:1; wait_queue_head_t bulk_in_wait; /* to wait for an ongoing read */ }; #define to_skel_dev(d) container_of(d, struct usb_skel, kref) @@ -75,6 +76,7 @@ static void skel_delete(struct kref *kref) struct usb_skel *dev = to_skel_dev(kref); usb_free_urb(dev->bulk_in_urb); + usb_put_intf(dev->interface); usb_put_dev(dev->udev); kfree(dev->bulk_in_buffer); kfree(dev); @@ -126,10 +128,7 @@ static int skel_release(struct inode *inode, struct file *file) return -ENODEV; /* allow the device to be autosuspended */ - mutex_lock(&dev->io_mutex); - if (dev->interface) - usb_autopm_put_interface(dev->interface); - mutex_unlock(&dev->io_mutex); + usb_autopm_put_interface(dev->interface); /* decrement the count on our device */ kref_put(&dev->kref, skel_delete); @@ -241,7 +240,7 @@ static ssize_t skel_read(struct file *file, char *buffer, size_t count, if (rv < 0) return rv; - if (!dev->interface) { /* disconnect() was called */ + if (dev->disconnected) { /* disconnect() was called */ rv = -ENODEV; goto exit; } @@ -422,7 +421,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, /* this lock makes sure we don't submit URBs to gone devices */ mutex_lock(&dev->io_mutex); - if (!dev->interface) { /* disconnect() was called */ + if (dev->disconnected) { /* disconnect() was called */ mutex_unlock(&dev->io_mutex); retval = -ENODEV; goto error; @@ -507,7 +506,7 @@ static int skel_probe(struct usb_interface *interface, init_waitqueue_head(&dev->bulk_in_wait); dev->udev = usb_get_dev(interface_to_usbdev(interface)); - dev->interface = interface; + dev->interface = usb_get_intf(interface); /* set up the endpoint information */ /* use only the first bulk-in and bulk-out endpoints */ @@ -573,7 +572,7 @@ static void skel_disconnect(struct usb_interface *interface) /* prevent more I/O from starting */ mutex_lock(&dev->io_mutex); - dev->interface = NULL; + dev->disconnected = 1; mutex_unlock(&dev->io_mutex); usb_kill_anchored_urbs(&dev->submitted); |