diff options
Diffstat (limited to 'drivers/usb')
30 files changed, 254 insertions, 72 deletions
diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c index 6ed4b00dba96..7a2a9559693f 100644 --- a/drivers/usb/chipidea/otg_fsm.c +++ b/drivers/usb/chipidea/otg_fsm.c @@ -256,8 +256,10 @@ static void ci_otg_del_timer(struct ci_hdrc *ci, enum otg_fsm_timer t) ci->enabled_otg_timer_bits &= ~(1 << t); if (ci->next_otg_timer == t) { if (ci->enabled_otg_timer_bits == 0) { + spin_unlock_irqrestore(&ci->lock, flags); /* No enabled timers after delete it */ hrtimer_cancel(&ci->otg_fsm_hrtimer); + spin_lock_irqsave(&ci->lock, flags); ci->next_otg_timer = NUM_OTG_FSM_TIMERS; } else { /* Find the next timer */ diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 0522bd2d9d3c..e927631c79c6 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1883,6 +1883,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */ .driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */ }, + { USB_DEVICE(0x0c26, 0x0020), /* Icom ICF3400 Serie */ + .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ + }, { USB_DEVICE(0x0ca6, 0xa050), /* Castles VEGA3000 */ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ }, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 29cc2aa5abff..d1a7f22cb3a9 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -5851,6 +5851,11 @@ re_enumerate_no_bos: * the reset is over (using their post_reset method). * * Return: The same as for usb_reset_and_verify_device(). + * However, if a reset is already in progress (for instance, if a + * driver doesn't have pre_reset() or post_reset() callbacks, and while + * being unbound or re-bound during the ongoing reset its disconnect() + * or probe() routine tries to perform a second, nested reset), the + * routine returns -EINPROGRESS. * * Note: * The caller must own the device lock. For example, it's safe to use @@ -5884,6 +5889,10 @@ int usb_reset_device(struct usb_device *udev) return -EISDIR; } + if (udev->reset_in_progress) + return -EINPROGRESS; + udev->reset_in_progress = 1; + port_dev = hub->ports[udev->portnum - 1]; /* @@ -5948,6 +5957,7 @@ int usb_reset_device(struct usb_device *udev) usb_autosuspend_device(udev); memalloc_noio_restore(noio_flag); + udev->reset_in_progress = 0; return ret; } EXPORT_SYMBOL_GPL(usb_reset_device); diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f8f2de7899a9..35a11f7bcb65 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -362,6 +362,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM }, { USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM }, + /* Realforce 87U Keyboard */ + { USB_DEVICE(0x0853, 0x011b), .driver_info = USB_QUIRK_NO_LPM }, + /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, @@ -388,6 +391,15 @@ static const struct usb_device_id usb_quirk_list[] = { /* Kingston DataTraveler 3.0 */ { USB_DEVICE(0x0951, 0x1666), .driver_info = USB_QUIRK_NO_LPM }, + /* NVIDIA Jetson devices in Force Recovery mode */ + { USB_DEVICE(0x0955, 0x7018), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7019), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7418), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7721), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7c18), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7e19), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7f21), .driver_info = USB_QUIRK_RESET_RESUME }, + /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */ { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF }, @@ -438,6 +450,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1532, 0x0116), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Lenovo ThinkPad OneLink+ Dock twin hub controllers (VIA Labs VL812) */ + { USB_DEVICE(0x17ef, 0x1018), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x17ef, 0x1019), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Lenovo USB-C to Ethernet Adapter RTL8153-04 */ { USB_DEVICE(0x17ef, 0x720c), .driver_info = USB_QUIRK_NO_LPM }, diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index a9e86f5e6eaa..4f3099496019 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -142,9 +142,9 @@ static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) } else if (hsotg->plat && hsotg->plat->phy_init) { ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type); } else { - ret = phy_power_on(hsotg->phy); + ret = phy_init(hsotg->phy); if (ret == 0) - ret = phy_init(hsotg->phy); + ret = phy_power_on(hsotg->phy); } return ret; @@ -176,9 +176,9 @@ static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg) } else if (hsotg->plat && hsotg->plat->phy_exit) { ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); } else { - ret = phy_exit(hsotg->phy); + ret = phy_power_off(hsotg->phy); if (ret == 0) - ret = phy_power_off(hsotg->phy); + ret = phy_exit(hsotg->phy); } if (ret) return ret; diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 984faecdd7ec..465aabb6e96c 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -673,15 +673,16 @@ static void dwc3_core_exit(struct dwc3 *dwc) { dwc3_event_buffers_cleanup(dwc); + usb_phy_set_suspend(dwc->usb2_phy, 1); + usb_phy_set_suspend(dwc->usb3_phy, 1); + phy_power_off(dwc->usb2_generic_phy); + phy_power_off(dwc->usb3_generic_phy); + usb_phy_shutdown(dwc->usb2_phy); usb_phy_shutdown(dwc->usb3_phy); phy_exit(dwc->usb2_generic_phy); phy_exit(dwc->usb3_generic_phy); - usb_phy_set_suspend(dwc->usb2_phy, 1); - usb_phy_set_suspend(dwc->usb3_phy, 1); - phy_power_off(dwc->usb2_generic_phy); - phy_power_off(dwc->usb3_generic_phy); clk_bulk_disable(dwc->num_clks, dwc->clks); clk_bulk_unprepare(dwc->num_clks, dwc->clks); reset_control_assert(dwc->reset); @@ -1509,16 +1510,16 @@ err5: dwc3_debugfs_exit(dwc); dwc3_event_buffers_cleanup(dwc); - usb_phy_shutdown(dwc->usb2_phy); - usb_phy_shutdown(dwc->usb3_phy); - phy_exit(dwc->usb2_generic_phy); - phy_exit(dwc->usb3_generic_phy); - usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); phy_power_off(dwc->usb2_generic_phy); phy_power_off(dwc->usb3_generic_phy); + usb_phy_shutdown(dwc->usb2_phy); + usb_phy_shutdown(dwc->usb3_phy); + phy_exit(dwc->usb2_generic_phy); + phy_exit(dwc->usb3_generic_phy); + dwc3_ulpi_exit(dwc); err4: diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 527938eee846..955bf820f410 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -36,6 +36,11 @@ #define PCI_DEVICE_ID_INTEL_CNPH 0xa36e #define PCI_DEVICE_ID_INTEL_CNPV 0xa3b0 #define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee +#define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e +#define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee +#define PCI_DEVICE_ID_INTEL_TGPH 0x43ee +#define PCI_DEVICE_ID_INTEL_JSP 0x4dee +#define PCI_DEVICE_ID_INTEL_ADLS 0x7ae1 #define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -144,7 +149,8 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc) if (pdev->vendor == PCI_VENDOR_ID_INTEL) { if (pdev->device == PCI_DEVICE_ID_INTEL_BXT || - pdev->device == PCI_DEVICE_ID_INTEL_BXT_M) { + pdev->device == PCI_DEVICE_ID_INTEL_BXT_M || + pdev->device == PCI_DEVICE_ID_INTEL_EHLLP) { guid_parse(PCI_INTEL_BXT_DSM_GUID, &dwc->guid); dwc->has_dsm_for_pm = true; } @@ -351,6 +357,21 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICLLP), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_EHLLP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPLP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPH), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_JSP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLS), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */ diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 5bb5384f3612..9d5320562e81 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -173,6 +173,14 @@ static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom) return 0; } +/* Only usable in contexts where the role can not change. */ +static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom) +{ + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); + + return dwc->xhci; +} + static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) { if (qcom->hs_phy_irq) { @@ -280,7 +288,11 @@ static irqreturn_t qcom_dwc3_resume_irq(int irq, void *data) if (qcom->pm_suspended) return IRQ_HANDLED; - if (dwc->xhci) + /* + * This is safe as role switching is done from a freezable workqueue + * and the wakeup interrupts are disabled as part of resume. + */ + if (dwc3_qcom_is_host(qcom)) pm_runtime_resume(&dwc->xhci->dev); return IRQ_HANDLED; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 3c8ec1c07ef3..6c82ea6d8e20 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -981,8 +981,8 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS; } - /* always enable Interrupt on Missed ISOC */ - trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI; + if (!no_interrupt && !chain) + trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI; break; case USB_ENDPOINT_XFER_BULK: @@ -2363,6 +2363,10 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep, if (event->status & DEPEVT_STATUS_SHORT && !chain) return 1; + if ((trb->ctrl & DWC3_TRB_CTRL_ISP_IMI) && + DWC3_TRB_SIZE_TRBSTS(trb->size) == DWC3_TRBSTS_MISSED_ISOC) + return 1; + if ((trb->ctrl & DWC3_TRB_CTRL_IOC) || (trb->ctrl & DWC3_TRB_CTRL_LST)) return 1; diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index 1a3878a3be78..124e9f80dccd 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -142,4 +142,5 @@ void dwc3_host_exit(struct dwc3 *dwc) phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy", dev_name(dwc->dev)); platform_device_unregister(dwc->xhci); + dwc->xhci = NULL; } diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c index 2a1868b2d24c..dd5eb6202fe1 100644 --- a/drivers/usb/gadget/function/f_printer.c +++ b/drivers/usb/gadget/function/f_printer.c @@ -87,7 +87,7 @@ struct printer_dev { u8 printer_cdev_open; wait_queue_head_t wait; unsigned q_len; - char *pnp_string; /* We don't own memory! */ + char **pnp_string; /* We don't own memory! */ struct usb_function function; }; @@ -963,16 +963,16 @@ static int printer_func_setup(struct usb_function *f, if ((wIndex>>8) != dev->interface) break; - if (!dev->pnp_string) { + if (!*dev->pnp_string) { value = 0; break; } - value = strlen(dev->pnp_string); + value = strlen(*dev->pnp_string); buf[0] = (value >> 8) & 0xFF; buf[1] = value & 0xFF; - memcpy(buf + 2, dev->pnp_string, value); + memcpy(buf + 2, *dev->pnp_string, value); DBG(dev, "1284 PNP String: %x %s\n", value, - dev->pnp_string); + *dev->pnp_string); break; case GET_PORT_STATUS: /* Get Port Status */ @@ -1435,7 +1435,7 @@ static struct usb_function *gprinter_alloc(struct usb_function_instance *fi) kref_init(&dev->kref); ++opts->refcnt; dev->minor = opts->minor; - dev->pnp_string = opts->pnp_string; + dev->pnp_string = &opts->pnp_string; dev->q_len = opts->q_len; mutex_unlock(&opts->lock); diff --git a/drivers/usb/gadget/function/storage_common.c b/drivers/usb/gadget/function/storage_common.c index f7e6c42558eb..021984921f91 100644 --- a/drivers/usb/gadget/function/storage_common.c +++ b/drivers/usb/gadget/function/storage_common.c @@ -294,8 +294,10 @@ EXPORT_SYMBOL_GPL(fsg_lun_fsync_sub); void store_cdrom_address(u8 *dest, int msf, u32 addr) { if (msf) { - /* Convert to Minutes-Seconds-Frames */ - addr >>= 2; /* Convert to 2048-byte frames */ + /* + * Convert to Minutes-Seconds-Frames. + * Sector size is already set to 2048 bytes. + */ addr += 2*75; /* Lead-in occupies 2 seconds */ dest[3] = addr % 75; /* Frames */ addr /= 75; diff --git a/drivers/usb/gadget/udc/bdc/bdc_udc.c b/drivers/usb/gadget/udc/bdc/bdc_udc.c index 7bfd58c846f7..71ed3a15130f 100644 --- a/drivers/usb/gadget/udc/bdc/bdc_udc.c +++ b/drivers/usb/gadget/udc/bdc/bdc_udc.c @@ -151,6 +151,7 @@ static void bdc_uspc_disconnected(struct bdc *bdc, bool reinit) bdc->delayed_status = false; bdc->reinit = reinit; bdc->test_mode = false; + usb_gadget_set_state(&bdc->gadget, USB_STATE_NOTATTACHED); } /* TNotify wkaeup timer */ diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index e40370ed7d8a..b5a18817c807 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -565,7 +565,7 @@ struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd) * It will release and re-aquire the lock while calling ACPI * method. */ -void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, +static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index, bool on, unsigned long *flags) { struct xhci_hub *rhub; @@ -1464,6 +1464,17 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) status = bus_state->resuming_ports; + /* + * SS devices are only visible to roothub after link training completes. + * Keep polling roothubs for a grace period after xHC start + */ + if (xhci->run_graceperiod) { + if (time_before(jiffies, xhci->run_graceperiod)) + status = 1; + else + xhci->run_graceperiod = 0; + } + mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC; /* For each port, did anything change? If so, set that bit in buf. */ diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 798823ce2b34..3bfb344a164a 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -650,7 +650,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, num_stream_ctxs, &stream_info->ctx_array_dma, mem_flags); if (!stream_info->stream_ctx_array) - goto cleanup_ctx; + goto cleanup_ring_array; memset(stream_info->stream_ctx_array, 0, sizeof(struct xhci_stream_ctx)*num_stream_ctxs); @@ -711,6 +711,11 @@ cleanup_rings: } xhci_free_command(xhci, stream_info->free_streams_command); cleanup_ctx: + xhci_free_stream_ctx(xhci, + stream_info->num_stream_ctxs, + stream_info->stream_ctx_array, + stream_info->ctx_array_dma); +cleanup_ring_array: kfree(stream_info->stream_rings); cleanup_info: kfree(stream_info); @@ -901,15 +906,19 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) if (dev->eps[i].stream_info) xhci_free_stream_info(xhci, dev->eps[i].stream_info); - /* Endpoints on the TT/root port lists should have been removed - * when usb_disable_device() was called for the device. - * We can't drop them anyway, because the udev might have gone - * away by this point, and we can't tell what speed it was. + /* + * Endpoints are normally deleted from the bandwidth list when + * endpoints are dropped, before device is freed. + * If host is dying or being removed then endpoints aren't + * dropped cleanly, so delete the endpoint from list here. + * Only applicable for hosts with software bandwidth checking. */ - if (!list_empty(&dev->eps[i].bw_endpoint_list)) - xhci_warn(xhci, "Slot %u endpoint %u " - "not removed from BW list!\n", - slot_id, i); + + if (!list_empty(&dev->eps[i].bw_endpoint_list)) { + list_del_init(&dev->eps[i].bw_endpoint_list); + xhci_dbg(xhci, "Slot %u endpoint %u not removed from BW list!\n", + slot_id, i); + } } /* If this is a hub, free the TT(s) from the TT list */ xhci_free_tt_info(xhci, dev, slot_id); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index e6bbb9195554..7f640603b103 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -242,8 +242,14 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_BROKEN_STREAMS; if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && - pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) + pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) { + /* + * try to tame the ASMedia 1042 controller which reports 0.96 + * but appears to behave more like 1.0 + */ + xhci->quirks |= XHCI_SPURIOUS_SUCCESS; xhci->quirks |= XHCI_BROKEN_STREAMS; + } if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) { xhci->quirks |= XHCI_TRUST_TX_LENGTH; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 677587479d26..3a1ed63d7334 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -149,9 +149,11 @@ int xhci_start(struct xhci_hcd *xhci) xhci_err(xhci, "Host took too long to start, " "waited %u microseconds.\n", XHCI_MAX_HALT_USEC); - if (!ret) + if (!ret) { /* clear state flags. Including dying, halted or removing */ xhci->xhc_state = 0; + xhci->run_graceperiod = jiffies + msecs_to_jiffies(500); + } return ret; } @@ -774,8 +776,6 @@ static void xhci_stop(struct usb_hcd *hcd) void xhci_shutdown(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - unsigned long flags; - int i; if (xhci->quirks & XHCI_SPURIOUS_REBOOT) usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev)); @@ -791,21 +791,12 @@ void xhci_shutdown(struct usb_hcd *hcd) del_timer_sync(&xhci->shared_hcd->rh_timer); } - spin_lock_irqsave(&xhci->lock, flags); + spin_lock_irq(&xhci->lock); xhci_halt(xhci); - - /* Power off USB2 ports*/ - for (i = 0; i < xhci->usb2_rhub.num_ports; i++) - xhci_set_port_power(xhci, xhci->main_hcd, i, false, &flags); - - /* Power off USB3 ports*/ - for (i = 0; i < xhci->usb3_rhub.num_ports; i++) - xhci_set_port_power(xhci, xhci->shared_hcd, i, false, &flags); - /* Workaround for spurious wakeups at shutdown with HSW */ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) xhci_reset(xhci, XHCI_RESET_SHORT_USEC); - spin_unlock_irqrestore(&xhci->lock, flags); + spin_unlock_irq(&xhci->lock); xhci_cleanup_msix(xhci); @@ -1164,7 +1155,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* re-initialize the HC on Restore Error, or Host Controller Error */ if (temp & (STS_SRE | STS_HCE)) { reinit_xhc = true; - xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp); + if (!xhci->broken_suspend) + xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp); } if (reinit_xhc) { diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 3b29dfc6f79e..029ffcb13d62 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1811,7 +1811,7 @@ struct xhci_hcd { /* Host controller watchdog timer structures */ unsigned int xhc_state; - + unsigned long run_graceperiod; u32 command; struct s3_save s3; /* Host controller is dying - not responding to commands. "I'm not dead yet!" @@ -2145,8 +2145,6 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, int xhci_hub_status_data(struct usb_hcd *hcd, char *buf); int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1); struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd); -void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index, - bool on, unsigned long *flags); void xhci_hc_died(struct xhci_hcd *xhci); diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index bb24527f3c70..ba2b6fbab9b8 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -178,10 +178,6 @@ static int idmouse_create_image(struct usb_idmouse *dev) bytes_read += bulk_read; } - /* reset the device */ -reset: - ftip_command(dev, FTIP_RELEASE, 0, 0); - /* check for valid image */ /* right border should be black (0x00) */ for (bytes_read = sizeof(HEADER)-1 + WIDTH-1; bytes_read < IMGSIZE; bytes_read += WIDTH) @@ -193,6 +189,10 @@ reset: if (dev->bulk_in_buffer[bytes_read] != 0xFF) return -EAGAIN; + /* reset the device */ +reset: + ftip_command(dev, FTIP_RELEASE, 0, 0); + /* should be IMGSIZE == 65040 */ dev_dbg(&dev->interface->dev, "read %d bytes fingerprint data\n", bytes_read); diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index f48a23adbc35..094e812e9e69 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -1268,6 +1268,11 @@ static int mon_bin_mmap(struct file *filp, struct vm_area_struct *vma) { /* don't do anything here: "fault" will set up page table entries */ vma->vm_ops = &mon_bin_vm_ops; + + if (vma->vm_flags & VM_WRITE) + return -EPERM; + + vma->vm_flags &= ~VM_MAYWRITE; vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP; vma->vm_private_data = filp->private_data; mon_bin_vma_open(vma); diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 4622400ba4dd..8e83995fc3bd 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -760,6 +760,9 @@ static void rxstate(struct musb *musb, struct musb_request *req) musb_writew(epio, MUSB_RXCSR, csr); buffer_aint_mapped: + fifo_count = min_t(unsigned int, + request->length - request->actual, + (unsigned int)fifo_count); musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *) (request->buf + request->actual)); request->actual += fifo_count; diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index f789b60ed8c1..7eabb1bfafde 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -96,6 +96,8 @@ struct ch341_private { u8 mcr; u8 msr; u8 lcr; + + u8 version; }; static void ch341_set_termios(struct tty_struct *tty, @@ -174,13 +176,20 @@ static int ch341_set_baudrate_lcr(struct usb_device *dev, /* * CH341A buffers data until a full endpoint-size packet (32 bytes) * has been received unless bit 7 is set. + * + * At least one device with version 0x27 appears to have this bit + * inverted. */ - a |= BIT(7); + if (priv->version > 0x27) + a |= BIT(7); r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x1312, a); if (r) return r; + if (priv->version < 0x30) + return 0; + r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x2518, lcr); if (r) return r; @@ -232,7 +241,9 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) r = ch341_control_in(dev, CH341_REQ_READ_VERSION, 0, 0, buffer, size); if (r < 0) goto out; - dev_dbg(&dev->dev, "Chip version: 0x%02x\n", buffer[0]); + + priv->version = buffer[0]; + dev_dbg(&dev->dev, "Chip version: 0x%02x\n", priv->version); r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, 0, 0); if (r < 0) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 95a5c73f3f78..c7c6d5d1dfbc 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -131,6 +131,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */ { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */ { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */ + { USB_DEVICE(0x10C4, 0x8414) }, /* Decagon USB Cable Adapter */ { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ { USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7fa56728696d..1afffa92420a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1035,6 +1035,8 @@ static const struct usb_device_id id_table_combined[] = { /* IDS GmbH devices */ { USB_DEVICE(IDS_VID, IDS_SI31A_PID) }, { USB_DEVICE(IDS_VID, IDS_CM31A_PID) }, + /* Omron devices */ + { USB_DEVICE(OMRON_VID, OMRON_CS1W_CIF31_PID) }, /* U-Blox devices */ { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) }, { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) }, @@ -1302,8 +1304,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty, case 38400: div_value = ftdi_sio_b38400; break; case 57600: div_value = ftdi_sio_b57600; break; case 115200: div_value = ftdi_sio_b115200; break; - } /* baud */ - if (div_value == 0) { + default: dev_dbg(dev, "%s - Baudrate (%d) requested is not supported\n", __func__, baud); div_value = ftdi_sio_b9600; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 4e92c165c86b..31c8ccabbbb7 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -662,6 +662,12 @@ #define INFINEON_TRIBOARD_TC2X7_PID 0x0043 /* DAS JTAG TriBoard TC2X7 V1.0 */ /* + * Omron corporation (https://www.omron.com) + */ + #define OMRON_VID 0x0590 + #define OMRON_CS1W_CIF31_PID 0x00b2 + +/* * Acton Research Corp. */ #define ACTON_VID 0x0647 /* Vendor ID */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d7ea64e8b024..ebb293627129 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -162,6 +162,8 @@ static void option_instat_callback(struct urb *urb); #define NOVATELWIRELESS_PRODUCT_G2 0xA010 #define NOVATELWIRELESS_PRODUCT_MC551 0xB001 +#define UBLOX_VENDOR_ID 0x1546 + /* AMOI PRODUCTS */ #define AMOI_VENDOR_ID 0x1614 #define AMOI_PRODUCT_H01 0x0800 @@ -240,7 +242,6 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_UC15 0x9090 /* These u-blox products use Qualcomm's vendor ID */ #define UBLOX_PRODUCT_R410M 0x90b2 -#define UBLOX_PRODUCT_R6XX 0x90fa /* These Yuga products use Qualcomm's vendor ID */ #define YUGA_PRODUCT_CLM920_NC5 0x9625 @@ -253,8 +254,10 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_BG96 0x0296 #define QUECTEL_PRODUCT_EP06 0x0306 #define QUECTEL_PRODUCT_EM05G 0x030a +#define QUECTEL_PRODUCT_EM060K 0x030b #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 +#define QUECTEL_PRODUCT_RM520N 0x0801 #define QUECTEL_PRODUCT_EC200S_CN 0x6002 #define QUECTEL_PRODUCT_EC200T 0x6026 #define QUECTEL_PRODUCT_RM500K 0x7001 @@ -438,6 +441,8 @@ static void option_instat_callback(struct urb *urb); #define CINTERION_PRODUCT_MV31_2_RMNET 0x00b9 #define CINTERION_PRODUCT_MV32_WA 0x00f1 #define CINTERION_PRODUCT_MV32_WB 0x00f2 +#define CINTERION_PRODUCT_MV32_WA_RMNET 0x00f3 +#define CINTERION_PRODUCT_MV32_WB_RMNET 0x00f4 /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c @@ -573,6 +578,13 @@ static void option_instat_callback(struct urb *urb); #define WETELECOM_PRODUCT_6802 0x6802 #define WETELECOM_PRODUCT_WMD300 0x6803 +/* OPPO products */ +#define OPPO_VENDOR_ID 0x22d9 +#define OPPO_PRODUCT_R11 0x276c + +/* Sierra Wireless products */ +#define SIERRA_VENDOR_ID 0x1199 +#define SIERRA_PRODUCT_EM9191 0x90d3 /* Device flags */ @@ -1116,8 +1128,16 @@ static const struct usb_device_id option_ids[] = { /* u-blox products using Qualcomm vendor ID */ { USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M), .driver_info = RSVD(1) | RSVD(3) }, - { USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R6XX), + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x908b), /* u-blox LARA-R6 00B */ + .driver_info = RSVD(4) }, + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x90fa), .driver_info = RSVD(3) }, + /* u-blox products */ + { USB_DEVICE(UBLOX_VENDOR_ID, 0x1341) }, /* u-blox LARA-L6 */ + { USB_DEVICE(UBLOX_VENDOR_ID, 0x1342), /* u-blox LARA-L6 (RMNET) */ + .driver_info = RSVD(4) }, + { USB_DEVICE(UBLOX_VENDOR_ID, 0x1343), /* u-blox LARA-L6 (ECM) */ + .driver_info = RSVD(4) }, /* Quectel products using Quectel vendor ID */ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff), .driver_info = NUMEP2 }, @@ -1131,6 +1151,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff), .driver_info = NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0203, 0xff), /* BG95-M3 */ + .driver_info = ZLP }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), @@ -1138,6 +1160,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff), .driver_info = RSVD(6) | ZLP }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) }, @@ -1149,6 +1174,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10), .driver_info = ZLP }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) }, @@ -1993,8 +2021,12 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0)}, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA, 0xff), .driver_info = RSVD(3)}, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA_RMNET, 0xff), + .driver_info = RSVD(0) }, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB, 0xff), .driver_info = RSVD(3)}, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB_RMNET, 0xff), + .driver_info = RSVD(0) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100), .driver_info = RSVD(4) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120), @@ -2147,6 +2179,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x010a, 0xff) }, /* Fibocom MA510 (ECM mode) */ { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) }, /* Fibocom FG150 Diag */ { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) }, /* Fibocom FG150 AT */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0111, 0xff) }, /* Fibocom FM160 (MBIM mode) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff), /* Fibocom FM101-GL (laptop MBIM) */ @@ -2155,6 +2188,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */ + { USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 3f437f07356b..b7ba15d0ed6c 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -177,6 +177,7 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x413c, 0x81b3)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */ {DEVICE_SWI(0x413c, 0x81b5)}, /* Dell Wireless 5811e QDL */ {DEVICE_SWI(0x413c, 0x81b6)}, /* Dell Wireless 5811e QDL */ + {DEVICE_SWI(0x413c, 0x81c2)}, /* Dell Wireless 5811e */ {DEVICE_SWI(0x413c, 0x81cb)}, /* Dell Wireless 5816e QDL */ {DEVICE_SWI(0x413c, 0x81cc)}, /* Dell Wireless 5816e */ {DEVICE_SWI(0x413c, 0x81cf)}, /* Dell Wireless 5819 */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 66e7f5d123c4..b270be141b8e 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1275,12 +1275,6 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, USB_SC_RBC, USB_PR_BULK, NULL, 0 ), -UNUSUAL_DEV(0x090c, 0x1000, 0x1100, 0x1100, - "Samsung", - "Flash Drive FIT", - USB_SC_DEVICE, USB_PR_DEVICE, NULL, - US_FL_MAX_SECTORS_64), - /* aeb */ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, "Feiya", @@ -2294,6 +2288,13 @@ UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ), +/* Reported by Witold Lipieta <witold.lipieta@thaumatec.com> */ +UNUSUAL_DEV( 0x1fc9, 0x0117, 0x0100, 0x0100, + "NXP Semiconductors", + "PN7462AU", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Supplied with some Castlewood ORB removable drives */ UNUSUAL_DEV( 0x2027, 0xa001, 0x0000, 0x9999, "Double-H Technology", diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 2f72753c3e22..92e9bd006622 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -52,6 +52,13 @@ UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME), +/* Reported-by: Hongling Zeng <zenghongling@kylinos.cn> */ +UNUSUAL_DEV(0x090c, 0x2000, 0x0000, 0x9999, + "Hiksemi", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + /* * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI * commands in UAS mode. Observed with the 1.28 firmware; are there others? @@ -62,6 +69,13 @@ UNUSUAL_DEV(0x0984, 0x0301, 0x0128, 0x0128, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_UAS), +/* Reported-by: Tom Hu <huxiaoying@kylinos.cn> */ +UNUSUAL_DEV(0x0b05, 0x1932, 0x0000, 0x9999, + "ASUS", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + /* Reported-by: David Webb <djw@noc.ac.uk> */ UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999, "Seagate", @@ -69,6 +83,13 @@ UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_REPORT_LUNS), +/* Reported-by: Hongling Zeng <zenghongling@kylinos.cn> */ +UNUSUAL_DEV(0x0bda, 0x9210, 0x0000, 0x9999, + "Hiksemi", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + /* Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> */ UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999, "Initio Corporation", @@ -111,6 +132,13 @@ UNUSUAL_DEV(0x154b, 0xf00d, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), +/* Reported-by: Hongling Zeng <zenghongling@kylinos.cn> */ +UNUSUAL_DEV(0x17ef, 0x3899, 0x0000, 0x9999, + "Thinkplus", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + /* Reported-by: Hans de Goede <hdegoede@redhat.com> */ UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999, "VIA", diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c index 3f06e94771a7..52cdc06e1dea 100644 --- a/drivers/usb/typec/altmodes/displayport.c +++ b/drivers/usb/typec/altmodes/displayport.c @@ -91,8 +91,8 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con) case DP_STATUS_CON_UFP_D: case DP_STATUS_CON_BOTH: /* NOTE: First acting as DP source */ conf |= DP_CONF_UFP_U_AS_UFP_D; - pin_assign = DP_CAP_DFP_D_PIN_ASSIGN(dp->alt->vdo) & - DP_CAP_UFP_D_PIN_ASSIGN(dp->port->vdo); + pin_assign = DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo) & + DP_CAP_PIN_ASSIGN_DFP_D(dp->port->vdo); break; default: break; |