diff options
Diffstat (limited to 'drivers/usb/serial')
25 files changed, 340 insertions, 89 deletions
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 3bb1fff02bed..390bc4b25045 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -81,6 +81,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x4348, 0x5523) }, + { USB_DEVICE(0x1a86, 0x7522) }, { USB_DEVICE(0x1a86, 0x7523) }, { USB_DEVICE(0x1a86, 0x5523) }, { }, @@ -93,6 +94,7 @@ struct ch341_private { u8 mcr; u8 msr; u8 lcr; + unsigned long quirks; }; static void ch341_set_termios(struct tty_struct *tty, @@ -245,6 +247,53 @@ out: kfree(buffer); return r; } +static int ch341_detect_quirks(struct usb_serial_port *port) +{ + struct ch341_private *priv = usb_get_serial_port_data(port); + struct usb_device *udev = port->serial->dev; + const unsigned int size = 2; + unsigned long quirks = 0; + char *buffer; + int r; + + buffer = kmalloc(size, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + /* + * A subset of CH34x devices does not support all features. The + * prescaler is limited and there is no support for sending a RS232 + * break condition. A read failure when trying to set up the latter is + * used to detect these devices. + */ + r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), CH341_REQ_READ_REG, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + CH341_REG_BREAK, 0, buffer, size, DEFAULT_TIMEOUT); + if (r == -EPIPE) { + dev_dbg(&port->dev, "break control not supported\n"); + r = 0; + goto out; + } + + if (r != size) { + if (r >= 0) + r = -EIO; + dev_err(&port->dev, "failed to read break control: %d\n", r); + goto out; + } + + r = 0; +out: + kfree(buffer); + + if (quirks) { + dev_dbg(&port->dev, "enabling quirk flags: 0x%02lx\n", quirks); + priv->quirks |= quirks; + } + + return r; +} + static int ch341_port_probe(struct usb_serial_port *port) { struct ch341_private *priv; @@ -267,6 +316,11 @@ static int ch341_port_probe(struct usb_serial_port *port) goto error; usb_set_serial_port_data(port, priv); + + r = ch341_detect_quirks(port); + if (r < 0) + goto error; + return 0; error: kfree(priv); @@ -589,9 +643,13 @@ static int ch341_tiocmget(struct tty_struct *tty) static int ch341_reset_resume(struct usb_serial *serial) { struct usb_serial_port *port = serial->port[0]; - struct ch341_private *priv = usb_get_serial_port_data(port); + struct ch341_private *priv; int ret; + priv = usb_get_serial_port_data(port); + if (!priv) + return 0; + /* reconfigure ch341 serial port after bus-reset */ ch341_configure(serial->dev, priv); diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 979bef9bfb6b..a90801ef0055 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -125,6 +125,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ + { USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */ { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */ { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */ { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */ @@ -271,6 +272,8 @@ static struct usb_serial_driver cp210x_device = { .break_ctl = cp210x_break_ctl, .set_termios = cp210x_set_termios, .tx_empty = cp210x_tx_empty, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, .tiocmget = cp210x_tiocmget, .tiocmset = cp210x_tiocmset, .attach = cp210x_attach, @@ -914,6 +917,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, u32 baud; u16 bits; u32 ctl_hs; + u32 flow_repl; cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud); @@ -1014,6 +1018,22 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake); if (ctl_hs & CP210X_SERIAL_CTS_HANDSHAKE) { dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__); + /* + * When the port is closed, the CP210x hardware disables + * auto-RTS and RTS is deasserted but it leaves auto-CTS when + * in hardware flow control mode. When re-opening the port, if + * auto-CTS is enabled on the cp210x, then auto-RTS must be + * re-enabled in the driver. + */ + flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace); + flow_repl &= ~CP210X_SERIAL_RTS_MASK; + flow_repl |= CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_FLOW_CTL); + flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl); + cp210x_write_reg_block(port, + CP210X_SET_FLOW, + &flow_ctl, + sizeof(flow_ctl)); + cflag |= CRTSCTS; } else { dev_dbg(dev, "%s - flow control = NONE\n", __func__); diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 72d3ae1ebc64..77681229486e 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -59,6 +59,7 @@ static const struct usb_device_id id_table_earthmate[] = { static const struct usb_device_id id_table_cyphidcomrs232[] = { { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, + { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { } /* Terminating entry */ @@ -73,6 +74,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, + { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index 35e223751c0e..16b7410ad057 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -25,6 +25,9 @@ #define VENDOR_ID_CYPRESS 0x04b4 #define PRODUCT_ID_CYPHIDCOM 0x5500 +/* Simply Automated HID->COM UPB PIM (using Cypress PID 0x5500) */ +#define VENDOR_ID_SAI 0x17dd + /* FRWD Dongle - a GPS sports watch */ #define VENDOR_ID_FRWD 0x6737 #define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001 diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index b9afd12113eb..13aaf0687367 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1033,6 +1033,9 @@ static const struct usb_device_id id_table_combined[] = { /* Sienna devices */ { USB_DEVICE(FTDI_VID, FTDI_SIENNA_PID) }, { USB_DEVICE(ECHELON_VID, ECHELON_U20_PID) }, + /* U-Blox devices */ + { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) }, + { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) }, { } /* Terminating entry */ }; @@ -2434,12 +2437,11 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port, #define FTDI_RS_ERR_MASK (FTDI_RS_BI | FTDI_RS_PE | FTDI_RS_FE | FTDI_RS_OE) static int ftdi_process_packet(struct usb_serial_port *port, - struct ftdi_private *priv, char *packet, int len) + struct ftdi_private *priv, unsigned char *buf, int len) { + unsigned char status; int i; - char status; char flag; - char *ch; if (len < 2) { dev_dbg(&port->dev, "malformed packet\n"); @@ -2449,7 +2451,7 @@ static int ftdi_process_packet(struct usb_serial_port *port, /* Compare new line status to the old one, signal if different/ N.B. packet may be processed more than once, but differences are only processed once. */ - status = packet[0] & FTDI_STATUS_B0_MASK; + status = buf[0] & FTDI_STATUS_B0_MASK; if (status != priv->prev_status) { char diff_status = status ^ priv->prev_status; @@ -2475,13 +2477,12 @@ static int ftdi_process_packet(struct usb_serial_port *port, } /* save if the transmitter is empty or not */ - if (packet[1] & FTDI_RS_TEMT) + if (buf[1] & FTDI_RS_TEMT) priv->transmit_empty = 1; else priv->transmit_empty = 0; - len -= 2; - if (!len) + if (len == 2) return 0; /* status only */ /* @@ -2489,40 +2490,41 @@ static int ftdi_process_packet(struct usb_serial_port *port, * data payload to avoid over-reporting. */ flag = TTY_NORMAL; - if (packet[1] & FTDI_RS_ERR_MASK) { + if (buf[1] & FTDI_RS_ERR_MASK) { /* Break takes precedence over parity, which takes precedence * over framing errors */ - if (packet[1] & FTDI_RS_BI) { + if (buf[1] & FTDI_RS_BI) { flag = TTY_BREAK; port->icount.brk++; usb_serial_handle_break(port); - } else if (packet[1] & FTDI_RS_PE) { + } else if (buf[1] & FTDI_RS_PE) { flag = TTY_PARITY; port->icount.parity++; - } else if (packet[1] & FTDI_RS_FE) { + } else if (buf[1] & FTDI_RS_FE) { flag = TTY_FRAME; port->icount.frame++; } /* Overrun is special, not associated with a char */ - if (packet[1] & FTDI_RS_OE) { + if (buf[1] & FTDI_RS_OE) { port->icount.overrun++; tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); } } - port->icount.rx += len; - ch = packet + 2; + port->icount.rx += len - 2; if (port->port.console && port->sysrq) { - for (i = 0; i < len; i++, ch++) { - if (!usb_serial_handle_sysrq_char(port, *ch)) - tty_insert_flip_char(&port->port, *ch, flag); + for (i = 2; i < len; i++) { + if (usb_serial_handle_sysrq_char(port, buf[i])) + continue; + tty_insert_flip_char(&port->port, buf[i], flag); } } else { - tty_insert_flip_string_fixed_flag(&port->port, ch, flag, len); + tty_insert_flip_string_fixed_flag(&port->port, buf + 2, flag, + len - 2); } - return len; + return len - 2; } static void ftdi_process_read_urb(struct urb *urb) diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 22d66217cb41..e8373528264c 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1558,3 +1558,10 @@ */ #define UNJO_VID 0x22B7 #define UNJO_ISODEBUG_V1_PID 0x150D + +/* + * U-Blox products (http://www.u-blox.com). + */ +#define UBLOX_VID 0x1546 +#define UBLOX_C099F9P_ZED_PID 0x0502 +#define UBLOX_C099F9P_ODIN_PID 0x0503 diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 633550ec3025..f29c3a936a08 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1138,8 +1138,8 @@ static void garmin_read_process(struct garmin_data *garmin_data_p, send it directly to the tty port */ if (garmin_data_p->flags & FLAGS_QUEUING) { pkt_add(garmin_data_p, data, data_length); - } else if (bulk_data || - getLayerId(data) == GARMIN_LAYERID_APPL) { + } else if (bulk_data || (data_length >= sizeof(u32) && + getLayerId(data) == GARMIN_LAYERID_APPL)) { spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags |= APP_RESP_SEEN; diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 48a439298a68..4cca0b836f43 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -710,13 +710,13 @@ static void edge_interrupt_callback(struct urb *urb) /* grab the txcredits for the ports if available */ position = 2; portNumber = 0; - while ((position < length) && + while ((position < length - 1) && (portNumber < edge_serial->serial->num_ports)) { txCredits = data[position] | (data[position+1] << 8); if (txCredits) { port = edge_serial->serial->port[portNumber]; edge_port = usb_get_serial_port_data(port); - if (edge_port->open) { + if (edge_port && edge_port->open) { spin_lock_irqsave(&edge_port->ep_lock, flags); edge_port->txCredits += txCredits; @@ -1725,7 +1725,8 @@ static void edge_break(struct tty_struct *tty, int break_state) static void process_rcvd_data(struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength) { - struct device *dev = &edge_serial->serial->dev->dev; + struct usb_serial *serial = edge_serial->serial; + struct device *dev = &serial->dev->dev; struct usb_serial_port *port; struct edgeport_port *edge_port; __u16 lastBufferLength; @@ -1821,11 +1822,10 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, /* spit this data back into the tty driver if this port is open */ - if (rxLen) { - port = edge_serial->serial->port[ - edge_serial->rxPort]; + if (rxLen && edge_serial->rxPort < serial->num_ports) { + port = serial->port[edge_serial->rxPort]; edge_port = usb_get_serial_port_data(port); - if (edge_port->open) { + if (edge_port && edge_port->open) { dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n", __func__, rxLen, edge_serial->rxPort); @@ -1833,8 +1833,8 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, rxLen); edge_port->port->icount.rx += rxLen; } - buffer += rxLen; } + buffer += rxLen; break; case EXPECT_HDR3: /* Expect 3rd byte of status header */ @@ -1869,6 +1869,8 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, __u8 code = edge_serial->rxStatusCode; /* switch the port pointer to the one being currently talked about */ + if (edge_serial->rxPort >= edge_serial->serial->num_ports) + return; port = edge_serial->serial->port[edge_serial->rxPort]; edge_port = usb_get_serial_port_data(port); if (edge_port == NULL) { @@ -2901,16 +2903,18 @@ static int edge_startup(struct usb_serial *serial) response = 0; if (edge_serial->is_epic) { + struct usb_host_interface *alt; + + alt = serial->interface->cur_altsetting; + /* EPIC thing, set up our interrupt polling now and our read * urb, so that the device knows it really is connected. */ interrupt_in_found = bulk_in_found = bulk_out_found = false; - for (i = 0; i < serial->interface->altsetting[0] - .desc.bNumEndpoints; ++i) { + for (i = 0; i < alt->desc.bNumEndpoints; ++i) { struct usb_endpoint_descriptor *endpoint; int buffer_size; - endpoint = &serial->interface->altsetting[0]. - endpoint[i].desc; + endpoint = &alt->endpoint[i].desc; buffer_size = usb_endpoint_maxp(endpoint); if (!interrupt_in_found && (usb_endpoint_is_int_in(endpoint))) { diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 7643716b5299..badd38586b54 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -45,9 +45,10 @@ static int buffer_size; static int xbof = -1; static int ir_startup (struct usb_serial *serial); -static int ir_open(struct tty_struct *tty, struct usb_serial_port *port); -static int ir_prepare_write_buffer(struct usb_serial_port *port, - void *dest, size_t size); +static int ir_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static int ir_write_room(struct tty_struct *tty); +static void ir_write_bulk_callback(struct urb *urb); static void ir_process_read_urb(struct urb *urb); static void ir_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); @@ -77,8 +78,9 @@ static struct usb_serial_driver ir_device = { .num_ports = 1, .set_termios = ir_set_termios, .attach = ir_startup, - .open = ir_open, - .prepare_write_buffer = ir_prepare_write_buffer, + .write = ir_write, + .write_room = ir_write_room, + .write_bulk_callback = ir_write_bulk_callback, .process_read_urb = ir_process_read_urb, }; @@ -195,6 +197,9 @@ static int ir_startup(struct usb_serial *serial) struct usb_irda_cs_descriptor *irda_desc; int rates; + if (serial->num_bulk_in < 1 || serial->num_bulk_out < 1) + return -ENODEV; + irda_desc = irda_usb_find_class_desc(serial, 0); if (!irda_desc) { dev_err(&serial->dev->dev, @@ -251,35 +256,102 @@ static int ir_startup(struct usb_serial *serial) return 0; } -static int ir_open(struct tty_struct *tty, struct usb_serial_port *port) +static int ir_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) { - int i; + struct urb *urb = NULL; + unsigned long flags; + int ret; - for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) - port->write_urbs[i]->transfer_flags = URB_ZERO_PACKET; + if (port->bulk_out_size == 0) + return -EINVAL; - /* Start reading from the device */ - return usb_serial_generic_open(tty, port); -} + if (count == 0) + return 0; -static int ir_prepare_write_buffer(struct usb_serial_port *port, - void *dest, size_t size) -{ - unsigned char *buf = dest; - int count; + count = min(count, port->bulk_out_size - 1); + + spin_lock_irqsave(&port->lock, flags); + if (__test_and_clear_bit(0, &port->write_urbs_free)) { + urb = port->write_urbs[0]; + port->tx_bytes += count; + } + spin_unlock_irqrestore(&port->lock, flags); + + if (!urb) + return 0; /* * The first byte of the packet we send to the device contains an - * inbound header which indicates an additional number of BOFs and + * outbound header which indicates an additional number of BOFs and * a baud rate change. * * See section 5.4.2.2 of the USB IrDA spec. */ - *buf = ir_xbof | ir_baud; + *(u8 *)urb->transfer_buffer = ir_xbof | ir_baud; + + memcpy(urb->transfer_buffer + 1, buf, count); + + urb->transfer_buffer_length = count + 1; + urb->transfer_flags = URB_ZERO_PACKET; + + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret) { + dev_err(&port->dev, "failed to submit write urb: %d\n", ret); + + spin_lock_irqsave(&port->lock, flags); + __set_bit(0, &port->write_urbs_free); + port->tx_bytes -= count; + spin_unlock_irqrestore(&port->lock, flags); + + return ret; + } + + return count; +} + +static void ir_write_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + int status = urb->status; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + __set_bit(0, &port->write_urbs_free); + port->tx_bytes -= urb->transfer_buffer_length - 1; + spin_unlock_irqrestore(&port->lock, flags); + + switch (status) { + case 0: + break; + case -ENOENT: + case -ECONNRESET: + case -ESHUTDOWN: + dev_dbg(&port->dev, "write urb stopped: %d\n", status); + return; + case -EPIPE: + dev_err(&port->dev, "write urb stopped: %d\n", status); + return; + default: + dev_err(&port->dev, "nonzero write-urb status: %d\n", status); + break; + } + + usb_serial_port_softint(port); +} + +static int ir_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + int count = 0; + + if (port->bulk_out_size == 0) + return 0; + + if (test_bit(0, &port->write_urbs_free)) + count = port->bulk_out_size - 1; - count = kfifo_out_locked(&port->write_fifo, buf + 1, size - 1, - &port->lock); - return count + 1; + return count; } static void ir_process_read_urb(struct urb *urb) @@ -332,34 +404,34 @@ static void ir_set_termios(struct tty_struct *tty, switch (baud) { case 2400: - ir_baud = USB_IRDA_BR_2400; + ir_baud = USB_IRDA_LS_2400; break; case 9600: - ir_baud = USB_IRDA_BR_9600; + ir_baud = USB_IRDA_LS_9600; break; case 19200: - ir_baud = USB_IRDA_BR_19200; + ir_baud = USB_IRDA_LS_19200; break; case 38400: - ir_baud = USB_IRDA_BR_38400; + ir_baud = USB_IRDA_LS_38400; break; case 57600: - ir_baud = USB_IRDA_BR_57600; + ir_baud = USB_IRDA_LS_57600; break; case 115200: - ir_baud = USB_IRDA_BR_115200; + ir_baud = USB_IRDA_LS_115200; break; case 576000: - ir_baud = USB_IRDA_BR_576000; + ir_baud = USB_IRDA_LS_576000; break; case 1152000: - ir_baud = USB_IRDA_BR_1152000; + ir_baud = USB_IRDA_LS_1152000; break; case 4000000: - ir_baud = USB_IRDA_BR_4000000; + ir_baud = USB_IRDA_LS_4000000; break; default: - ir_baud = USB_IRDA_BR_9600; + ir_baud = USB_IRDA_LS_9600; baud = 9600; } diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index d5bff69b1769..ffbb2a8901b2 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -353,10 +353,11 @@ static void iuu_led_activity_on(struct urb *urb) struct usb_serial_port *port = urb->context; int result; char *buf_ptr = port->write_urb->transfer_buffer; - *buf_ptr++ = IUU_SET_LED; + if (xmas) { - get_random_bytes(buf_ptr, 6); - *(buf_ptr+7) = 1; + buf_ptr[0] = IUU_SET_LED; + get_random_bytes(buf_ptr + 1, 6); + buf_ptr[7] = 1; } else { iuu_rgbf_fill_buffer(buf_ptr, 255, 255, 0, 0, 0, 0, 255); } @@ -374,13 +375,14 @@ static void iuu_led_activity_off(struct urb *urb) struct usb_serial_port *port = urb->context; int result; char *buf_ptr = port->write_urb->transfer_buffer; + if (xmas) { iuu_rxcmd(urb); return; - } else { - *buf_ptr++ = IUU_SET_LED; - iuu_rgbf_fill_buffer(buf_ptr, 0, 0, 255, 255, 0, 0, 255); } + + iuu_rgbf_fill_buffer(buf_ptr, 0, 0, 255, 255, 0, 0, 255); + usb_fill_bulk_urb(port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), @@ -697,14 +699,16 @@ static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port, struct iuu_private *priv = usb_get_serial_port_data(port); unsigned long flags; - if (count > 256) - return -ENOMEM; - spin_lock_irqsave(&priv->lock, flags); + count = min(count, 256 - priv->writelen); + if (count == 0) + goto out; + /* fill the buffer */ memcpy(priv->writebuf + priv->writelen, buf, count); priv->writelen += count; +out: spin_unlock_irqrestore(&priv->lock, flags); return count; diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index e66a59ef43a1..aa3dbce22cfb 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1058,6 +1058,8 @@ static void usa49_glocont_callback(struct urb *urb) for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; p_priv = usb_get_serial_port_data(port); + if (!p_priv) + continue; if (p_priv->resend_cont) { dev_dbg(&port->dev, "%s - sending setup\n", __func__); @@ -1459,6 +1461,8 @@ static void usa67_glocont_callback(struct urb *urb) for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; p_priv = usb_get_serial_port_data(port); + if (!p_priv) + continue; if (p_priv->resend_cont) { dev_dbg(&port->dev, "%s - sending setup\n", __func__); diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 18110225d506..2ec4eeacebc7 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1833,10 +1833,6 @@ static int mos7720_startup(struct usb_serial *serial) product = le16_to_cpu(serial->dev->descriptor.idProduct); dev = serial->dev; - /* setting configuration feature to one */ - usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); - if (product == MOSCHIP_DEVICE_ID_7715) { struct urb *urb = serial->port[0]->interrupt_in_urb; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index a698d46ba773..ab4bf8d6d7df 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -119,11 +119,15 @@ /* This driver also supports * ATEN UC2324 device using Moschip MCS7840 * ATEN UC2322 device using Moschip MCS7820 + * MOXA UPort 2210 device using Moschip MCS7820 */ #define USB_VENDOR_ID_ATENINTL 0x0557 #define ATENINTL_DEVICE_ID_UC2324 0x2011 #define ATENINTL_DEVICE_ID_UC2322 0x7820 +#define USB_VENDOR_ID_MOXA 0x110a +#define MOXA_DEVICE_ID_2210 0x2210 + /* Interrupt Routine Defines */ #define SERIAL_IIR_RLS 0x06 @@ -195,6 +199,7 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, + {USB_DEVICE(USB_VENDOR_ID_MOXA, MOXA_DEVICE_ID_2210)}, {} /* terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); @@ -2020,6 +2025,7 @@ static int mos7840_probe(struct usb_serial *serial, const struct usb_device_id *id) { u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); + u16 vid = le16_to_cpu(serial->dev->descriptor.idVendor); u8 *buf; int device_type; @@ -2030,6 +2036,11 @@ static int mos7840_probe(struct usb_serial *serial, goto out; } + if (vid == USB_VENDOR_ID_MOXA && product == MOXA_DEVICE_ID_2210) { + device_type = MOSCHIP_DEVICE_ID_7820; + goto out; + } + buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -2279,11 +2290,6 @@ out: goto error; } else dev_dbg(&port->dev, "ZLP_REG5 Writing success status%d\n", status); - - /* setting configuration feature to one */ - usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - 0x03, 0x00, 0x01, 0x00, NULL, 0x00, - MOS_WDR_TIMEOUT); } return 0; error: diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index cb7aac9cd9e7..ed2b4e6dca38 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -113,7 +113,7 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype, retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), requesttype, USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, - 0, 0, buffer, 1, 0); + 0, 0, buffer, 1, USB_CTRL_SET_TIMEOUT); kfree(buffer); if (retval < 0) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 06ab016be0b6..9b7cee98ea60 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -197,6 +197,7 @@ static void option_instat_callback(struct urb *urb); #define DELL_PRODUCT_5804_MINICARD_ATT 0x819b /* Novatel E371 */ #define DELL_PRODUCT_5821E 0x81d7 +#define DELL_PRODUCT_5821E_ESIM 0x81e0 #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da @@ -244,9 +245,11 @@ static void option_instat_callback(struct urb *urb); /* These Quectel products use Quectel's vendor ID */ #define QUECTEL_PRODUCT_EC21 0x0121 #define QUECTEL_PRODUCT_EC25 0x0125 +#define QUECTEL_PRODUCT_EG95 0x0195 #define QUECTEL_PRODUCT_BG96 0x0296 #define QUECTEL_PRODUCT_EP06 0x0306 #define QUECTEL_PRODUCT_EM12 0x0512 +#define QUECTEL_PRODUCT_RM500Q 0x0800 #define CMOTECH_VENDOR_ID 0x16d8 #define CMOTECH_PRODUCT_6001 0x6001 @@ -566,6 +569,9 @@ static void option_instat_callback(struct urb *urb); /* Interface must have two endpoints */ #define NUMEP2 BIT(16) +/* Device needs ZLP */ +#define ZLP BIT(17) + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, @@ -1044,6 +1050,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) }, { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E), .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E_ESIM), + .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, @@ -1090,6 +1098,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25), .driver_info = RSVD(4) }, + { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95), + .driver_info = RSVD(4) }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), @@ -1098,6 +1108,11 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10), + .driver_info = ZLP }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003), @@ -1145,6 +1160,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1031, 0xff), /* Telit LE910C1-EUX */ + .driver_info = NCTRL(0) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1033, 0xff), /* Telit LE910C1-EUX (ECM) */ + .driver_info = NCTRL(0) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0), .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG1), @@ -1169,6 +1188,10 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(0) | RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1102, 0xff), /* Telit ME910 (ECM) */ .driver_info = NCTRL(0) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x110a, 0xff), /* Telit ME910G1 */ + .driver_info = NCTRL(0) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x110b, 0xff), /* Telit ME910G1 (ECM) */ + .driver_info = NCTRL(0) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910), .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4), @@ -1193,6 +1216,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff), /* Telit LN940 (MBIM) */ .driver_info = NCTRL(0) }, + { USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */ + .driver_info = NCTRL(0) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff), .driver_info = RSVD(1) }, @@ -1974,8 +1999,14 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */ + { USB_DEVICE_INTERFACE_CLASS(0x1435, 0xd191, 0xff), /* Wistron Neweb D19Q1 */ + .driver_info = RSVD(1) | RSVD(4) }, + { USB_DEVICE_INTERFACE_CLASS(0x1690, 0x7588, 0xff), /* ASKEY WWHC050 */ + .driver_info = RSVD(1) | RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff), /* Olicard 600 */ .driver_info = RSVD(4) }, + { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2033, 0xff), /* BroadMobi BM806U */ + .driver_info = RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2060, 0xff), /* BroadMobi BM818 */ .driver_info = RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */ @@ -1990,12 +2021,19 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) }, { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) }, { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) }, + { USB_DEVICE(0x0489, 0xe0b4), /* Foxconn T77W968 */ + .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, + { USB_DEVICE(0x0489, 0xe0b5), /* Foxconn T77W968 ESIM */ + .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 */ .driver_info = RSVD(4) | RSVD(5) | RSVD(6) }, { USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */ .driver_info = RSVD(4) | RSVD(5) }, { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */ .driver_info = RSVD(6) }, + { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ + { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ + { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); @@ -2090,6 +2128,9 @@ static int option_attach(struct usb_serial *serial) if (!(device_flags & NCTRL(iface_desc->bInterfaceNumber))) data->use_send_setup = 1; + if (device_flags & ZLP) + data->use_zlp = 1; + spin_lock_init(&data->susp_lock); usb_set_serial_data(serial, data); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index d7abde14b3cf..1322c657b951 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -93,6 +93,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD381_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index b0175f17d1a2..c98db6b650a5 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -124,6 +124,7 @@ #define HP_LM920_PRODUCT_ID 0x026b #define HP_TD620_PRODUCT_ID 0x0956 #define HP_LD960_PRODUCT_ID 0x0b39 +#define HP_LD381_PRODUCT_ID 0x0f7f #define HP_LCM220_PRODUCT_ID 0x3139 #define HP_LCM960_PRODUCT_ID 0x3239 #define HP_LD220_PRODUCT_ID 0x3524 diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 613f91add03d..0f60363c1bbc 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -155,6 +155,7 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x1199, 0x9056)}, /* Sierra Wireless Modem */ {DEVICE_SWI(0x1199, 0x9060)}, /* Sierra Wireless Modem */ {DEVICE_SWI(0x1199, 0x9061)}, /* Sierra Wireless Modem */ + {DEVICE_SWI(0x1199, 0x9062)}, /* Sierra Wireless EM7305 QDL */ {DEVICE_SWI(0x1199, 0x9063)}, /* Sierra Wireless EM7305 */ {DEVICE_SWI(0x1199, 0x9070)}, /* Sierra Wireless MC74xx */ {DEVICE_SWI(0x1199, 0x9071)}, /* Sierra Wireless MC74xx */ @@ -173,6 +174,8 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x413c, 0x81b3)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */ {DEVICE_SWI(0x413c, 0x81b5)}, /* Dell Wireless 5811e QDL */ {DEVICE_SWI(0x413c, 0x81b6)}, /* Dell Wireless 5811e QDL */ + {DEVICE_SWI(0x413c, 0x81cb)}, /* Dell Wireless 5816e QDL */ + {DEVICE_SWI(0x413c, 0x81cc)}, /* Dell Wireless 5816e */ {DEVICE_SWI(0x413c, 0x81cf)}, /* Dell Wireless 5819 */ {DEVICE_SWI(0x413c, 0x81d0)}, /* Dell Wireless 5819 */ {DEVICE_SWI(0x413c, 0x81d1)}, /* Dell Wireless 5818 */ diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index a62981ca7a73..f93b81a297d6 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -841,7 +841,10 @@ static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch) u8 newMSR = (u8) *ch; unsigned long flags; + /* May be called from qt2_process_read_urb() for an unbound port. */ port_priv = usb_get_serial_port_data(port); + if (!port_priv) + return; spin_lock_irqsave(&port_priv->lock, flags); port_priv->shadowMSR = newMSR; @@ -869,7 +872,10 @@ static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch) unsigned long flags; u8 newLSR = (u8) *ch; + /* May be called from qt2_process_read_urb() for an unbound port. */ port_priv = usb_get_serial_port_data(port); + if (!port_priv) + return; if (newLSR & UART_LSR_BI) newLSR &= (u8) (UART_LSR_OE | UART_LSR_BI); diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c index edbbb13d6de6..bd23a7cb1be2 100644 --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -86,6 +86,8 @@ DEVICE(moto_modem, MOTO_IDS); #define MOTOROLA_TETRA_IDS() \ { USB_DEVICE(0x0cad, 0x9011) }, /* Motorola Solutions TETRA PEI */ \ { USB_DEVICE(0x0cad, 0x9012) }, /* MTP6550 */ \ + { USB_DEVICE(0x0cad, 0x9013) }, /* MTP3xxx */ \ + { USB_DEVICE(0x0cad, 0x9015) }, /* MTP85xx */ \ { USB_DEVICE(0x0cad, 0x9016) } /* TPG2200 */ DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 270fb4e2ca1c..320479dec1a3 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1317,6 +1317,9 @@ static int usb_serial_register(struct usb_serial_driver *driver) return -EINVAL; } + /* Prevent individual ports from being unbound. */ + driver->driver.suppress_bind_attrs = true; + usb_serial_operations_init(driver); /* Add this device to our list of devices */ diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h index 1c120eaf4091..934e9361cf6b 100644 --- a/drivers/usb/serial/usb-wwan.h +++ b/drivers/usb/serial/usb-wwan.h @@ -38,6 +38,7 @@ struct usb_wwan_intf_private { spinlock_t susp_lock; unsigned int suspended:1; unsigned int use_send_setup:1; + unsigned int use_zlp:1; int in_flight; unsigned int open_ports; void *private; diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 7e855c87e4f7..4b9845807bee 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -270,6 +270,10 @@ static void usb_wwan_indat_callback(struct urb *urb) if (status) { dev_dbg(dev, "%s: nonzero status: %d on endpoint %02x.\n", __func__, status, endpoint); + + /* don't resubmit on fatal errors */ + if (status == -ESHUTDOWN || status == -ENOENT) + return; } else { if (urb->actual_length) { tty_insert_flip_string(&port->port, data, @@ -461,6 +465,7 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, void (*callback) (struct urb *)) { struct usb_serial *serial = port->serial; + struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); struct urb *urb; urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ @@ -471,6 +476,9 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, usb_sndbulkpipe(serial->dev, endpoint) | dir, buf, len, callback, ctx); + if (intfdata->use_zlp && dir == USB_DIR_OUT) + urb->transfer_flags |= URB_ZERO_PACKET; + return urb; } diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index aefd84f88b59..52e4e72491ee 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -559,6 +559,10 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, command_port = port->serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); + + if (command_port->bulk_out_size < datasize + 1) + return -EIO; + mutex_lock(&command_info->mutex); command_info->command_finished = false; @@ -632,6 +636,7 @@ static void firm_setup_port(struct tty_struct *tty) struct device *dev = &port->dev; struct whiteheat_port_settings port_settings; unsigned int cflag = tty->termios.c_cflag; + speed_t baud; port_settings.port = port->port_number + 1; @@ -692,11 +697,13 @@ static void firm_setup_port(struct tty_struct *tty) dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff); /* get the baud rate wanted */ - port_settings.baud = tty_get_baud_rate(tty); - dev_dbg(dev, "%s - baud rate = %d\n", __func__, port_settings.baud); + baud = tty_get_baud_rate(tty); + port_settings.baud = cpu_to_le32(baud); + dev_dbg(dev, "%s - baud rate = %u\n", __func__, baud); /* fixme: should set validated settings */ - tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud); + tty_encode_baud_rate(tty, baud, baud); + /* handle any settings that aren't specified in the tty structure */ port_settings.lloop = 0; diff --git a/drivers/usb/serial/whiteheat.h b/drivers/usb/serial/whiteheat.h index 72c1b0cf4063..56a3e8323f33 100644 --- a/drivers/usb/serial/whiteheat.h +++ b/drivers/usb/serial/whiteheat.h @@ -87,7 +87,7 @@ struct whiteheat_simple { struct whiteheat_port_settings { __u8 port; /* port number (1 to N) */ - __u32 baud; /* any value 7 - 460800, firmware calculates + __le32 baud; /* any value 7 - 460800, firmware calculates best fit; arrives little endian */ __u8 bits; /* 5, 6, 7, or 8 */ __u8 stop; /* 1 or 2, default 1 (2 = 1.5 if bits = 5) */ |