diff options
Diffstat (limited to 'drivers/usb/serial/cp210x.c')
-rw-r--r-- | drivers/usb/serial/cp210x.c | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 7ae121567098..7d602e6ccbc0 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -61,6 +61,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */ { USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */ + { USB_DEVICE(0x0988, 0x0578) }, /* Teraoka AD2000 */ { USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */ { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */ { USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */ @@ -145,6 +146,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8857) }, /* CEL EM357 ZigBee USB Stick */ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ + { USB_DEVICE(0x10C4, 0x88D8) }, /* Acuity Brands nLight Air Adapter */ { USB_DEVICE(0x10C4, 0x88FB) }, /* CESINEL MEDCAL STII Network Analyzer */ { USB_DEVICE(0x10C4, 0x8938) }, /* CESINEL MEDCAL S II Network Analyzer */ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */ @@ -201,6 +203,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1901, 0x0194) }, /* GE Healthcare Remote Alarm Box */ { USB_DEVICE(0x1901, 0x0195) }, /* GE B850/B650/B450 CP2104 DP UART interface */ { USB_DEVICE(0x1901, 0x0196) }, /* GE B850 CP2105 DP UART interface */ + { USB_DEVICE(0x1901, 0x0197) }, /* GE CS1000 Display serial interface */ + { USB_DEVICE(0x1901, 0x0198) }, /* GE CS1000 M.2 Key E serial interface */ + { USB_DEVICE(0x199B, 0xBA30) }, /* LORD WSDA-200-USB */ { USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */ @@ -271,6 +276,8 @@ static struct usb_serial_driver cp210x_device = { .break_ctl = cp210x_break_ctl, .set_termios = cp210x_set_termios, .tx_empty = cp210x_tx_empty, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, .tiocmget = cp210x_tiocmget, .tiocmset = cp210x_tiocmset, .attach = cp210x_attach, @@ -893,6 +900,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, u32 baud; u16 bits; u32 ctl_hs; + u32 flow_repl; cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud); @@ -993,6 +1001,22 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake); if (ctl_hs & CP210X_SERIAL_CTS_HANDSHAKE) { dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__); + /* + * When the port is closed, the CP210x hardware disables + * auto-RTS and RTS is deasserted but it leaves auto-CTS when + * in hardware flow control mode. When re-opening the port, if + * auto-CTS is enabled on the cp210x, then auto-RTS must be + * re-enabled in the driver. + */ + flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace); + flow_repl &= ~CP210X_SERIAL_RTS_MASK; + flow_repl |= CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_FLOW_CTL); + flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl); + cp210x_write_reg_block(port, + CP210X_SET_FLOW, + &flow_ctl, + sizeof(flow_ctl)); + cflag |= CRTSCTS; } else { dev_dbg(dev, "%s - flow control = NONE\n", __func__); |