diff options
Diffstat (limited to 'drivers/usb/dwc3/gadget.c')
| -rw-r--r-- | drivers/usb/dwc3/gadget.c | 70 |
1 files changed, 49 insertions, 21 deletions
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 4149d751719e..d0cfd3a0819d 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -276,7 +276,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, { const struct usb_endpoint_descriptor *desc = dep->endpoint.desc; struct dwc3 *dwc = dep->dwc; - u32 timeout = 1000; + u32 timeout = 5000; u32 saved_config = 0; u32 reg; @@ -310,13 +310,12 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, } if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_STARTTRANSFER) { - int needs_wakeup; + int link_state; - needs_wakeup = (dwc->link_state == DWC3_LINK_STATE_U1 || - dwc->link_state == DWC3_LINK_STATE_U2 || - dwc->link_state == DWC3_LINK_STATE_U3); - - if (unlikely(needs_wakeup)) { + link_state = dwc3_gadget_get_link_state(dwc); + if (link_state == DWC3_LINK_STATE_U1 || + link_state == DWC3_LINK_STATE_U2 || + link_state == DWC3_LINK_STATE_U3) { ret = __dwc3_gadget_wakeup(dwc); dev_WARN_ONCE(dwc->dev, ret, "wakeup failed --> %d\n", ret); @@ -606,8 +605,23 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1); if (desc->bInterval) { - params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(desc->bInterval - 1); - dep->interval = 1 << (desc->bInterval - 1); + u8 bInterval_m1; + + /* + * Valid range for DEPCFG.bInterval_m1 is from 0 to 13, and it + * must be set to 0 when the controller operates in full-speed. + */ + bInterval_m1 = min_t(u8, desc->bInterval - 1, 13); + if (dwc->gadget.speed == USB_SPEED_FULL) + bInterval_m1 = 0; + + if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT && + dwc->gadget.speed == USB_SPEED_FULL) + dep->interval = desc->bInterval; + else + dep->interval = 1 << (desc->bInterval - 1); + + params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(bInterval_m1); } return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETEPCONFIG, ¶ms); @@ -1048,19 +1062,19 @@ static struct dwc3_trb *dwc3_ep_prev_trb(struct dwc3_ep *dep, u8 index) static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep) { - struct dwc3_trb *tmp; u8 trbs_left; /* - * If enqueue & dequeue are equal than it is either full or empty. - * - * One way to know for sure is if the TRB right before us has HWO bit - * set or not. If it has, then we're definitely full and can't fit any - * more transfers in our ring. + * If the enqueue & dequeue are equal then the TRB ring is either full + * or empty. It's considered full when there are DWC3_TRB_NUM-1 of TRBs + * pending to be processed by the driver. */ if (dep->trb_enqueue == dep->trb_dequeue) { - tmp = dwc3_ep_prev_trb(dep, dep->trb_enqueue); - if (tmp->ctrl & DWC3_TRB_CTRL_HWO) + /* + * If there is any request remained in the started_list at + * this point, that means there is no TRB available. + */ + if (!list_empty(&dep->started_list)) return 0; return DWC3_TRB_NUM - 1; @@ -1656,6 +1670,8 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc) case DWC3_LINK_STATE_RESET: case DWC3_LINK_STATE_RX_DET: /* in HS, means Early Suspend */ case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */ + case DWC3_LINK_STATE_U2: /* in HS, means Sleep (L1) */ + case DWC3_LINK_STATE_U1: case DWC3_LINK_STATE_RESUME: break; default: @@ -1783,10 +1799,8 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) ret = wait_for_completion_timeout(&dwc->ep0_in_setup, msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT)); - if (ret == 0) { - dev_err(dwc->dev, "timed out waiting for SETUP phase\n"); - return -ETIMEDOUT; - } + if (ret == 0) + dev_warn(dwc->dev, "timed out waiting for SETUP phase\n"); } spin_lock_irqsave(&dwc->lock, flags); @@ -1813,6 +1827,10 @@ static void dwc3_gadget_enable_irq(struct dwc3 *dwc) if (dwc->revision < DWC3_REVISION_250A) reg |= DWC3_DEVTEN_ULSTCNGEN; + /* On 2.30a and above this bit enables U3/L2-L1 Suspend Events */ + if (dwc->revision >= DWC3_REVISION_230A) + reg |= DWC3_DEVTEN_EOPFEN; + dwc3_writel(dwc->regs, DWC3_DEVTEN, reg); } @@ -1916,6 +1934,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) /* begin to receive SETUP packets */ dwc->ep0state = EP0_SETUP_PHASE; dwc->link_state = DWC3_LINK_STATE_SS_DIS; + dwc->delayed_status = false; dwc3_ep0_out_start(dwc); dwc3_gadget_enable_irq(dwc); @@ -2681,6 +2700,15 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) dwc->connected = true; /* + * Ideally, dwc3_reset_gadget() would trigger the function + * drivers to stop any active transfers through ep disable. + * However, for functions which defer ep disable, such as mass + * storage, we will need to rely on the call to stop active + * transfers here, and avoid allowing of request queuing. + */ + dwc->connected = false; + + /* * WORKAROUND: DWC3 revisions <1.88a have an issue which * would cause a missing Disconnect Event if there's a * pending Setup Packet in the FIFO. |