diff options
Diffstat (limited to 'drivers/tty')
46 files changed, 704 insertions, 436 deletions
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c index 769e0a5d1dfc..3c6dd06ec5fb 100644 --- a/drivers/tty/ehv_bytechan.c +++ b/drivers/tty/ehv_bytechan.c @@ -136,6 +136,21 @@ static int find_console_handle(void) return 1; } +static unsigned int local_ev_byte_channel_send(unsigned int handle, + unsigned int *count, + const char *p) +{ + char buffer[EV_BYTE_CHANNEL_MAX_BYTES]; + unsigned int c = *count; + + if (c < sizeof(buffer)) { + memcpy(buffer, p, c); + memset(&buffer[c], 0, sizeof(buffer) - c); + p = buffer; + } + return ev_byte_channel_send(handle, count, p); +} + /*************************** EARLY CONSOLE DRIVER ***************************/ #ifdef CONFIG_PPC_EARLY_DEBUG_EHV_BC @@ -154,7 +169,7 @@ static void byte_channel_spin_send(const char data) do { count = 1; - ret = ev_byte_channel_send(CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE, + ret = local_ev_byte_channel_send(CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE, &count, &data); } while (ret == EV_EAGAIN); } @@ -221,7 +236,7 @@ static int ehv_bc_console_byte_channel_send(unsigned int handle, const char *s, while (count) { len = min_t(unsigned int, count, EV_BYTE_CHANNEL_MAX_BYTES); do { - ret = ev_byte_channel_send(handle, &len, s); + ret = local_ev_byte_channel_send(handle, &len, s); } while (ret == EV_EAGAIN); count -= len; s += len; @@ -401,7 +416,7 @@ static void ehv_bc_tx_dequeue(struct ehv_bc_data *bc) CIRC_CNT_TO_END(bc->head, bc->tail, BUF_SIZE), EV_BYTE_CHANNEL_MAX_BYTES); - ret = ev_byte_channel_send(bc->handle, &len, bc->buf + bc->tail); + ret = local_ev_byte_channel_send(bc->handle, &len, bc->buf + bc->tail); /* 'len' is valid only if the return code is 0 or EV_EAGAIN */ if (!ret || (ret == EV_EAGAIN)) diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index 27284a2dcd2b..cdcc64ea2554 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -302,10 +302,6 @@ int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops) vtermnos[index] = vtermno; cons_ops[index] = ops; - /* reserve all indices up to and including this index */ - if (last_hvc < index) - last_hvc = index; - /* check if we need to re-register the kernel console */ hvc_check_console(index); @@ -375,15 +371,14 @@ static int hvc_open(struct tty_struct *tty, struct file * filp) * tty fields and return the kref reference. */ if (rc) { - tty_port_tty_set(&hp->port, NULL); - tty->driver_data = NULL; - tty_port_put(&hp->port); printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc); - } else + } else { /* We are ready... raise DTR/RTS */ if (C_BAUD(tty)) if (hp->ops->dtr_rts) hp->ops->dtr_rts(hp, 1); + tty_port_set_initialized(&hp->port, true); + } /* Force wakeup of the polling thread */ hvc_kick(); @@ -393,22 +388,12 @@ static int hvc_open(struct tty_struct *tty, struct file * filp) static void hvc_close(struct tty_struct *tty, struct file * filp) { - struct hvc_struct *hp; + struct hvc_struct *hp = tty->driver_data; unsigned long flags; if (tty_hung_up_p(filp)) return; - /* - * No driver_data means that this close was issued after a failed - * hvc_open by the tty layer's release_dev() function and we can just - * exit cleanly because the kref reference wasn't made. - */ - if (!tty->driver_data) - return; - - hp = tty->driver_data; - spin_lock_irqsave(&hp->port.lock, flags); if (--hp->port.count == 0) { @@ -416,6 +401,9 @@ static void hvc_close(struct tty_struct *tty, struct file * filp) /* We are done with the tty pointer now. */ tty_port_tty_set(&hp->port, NULL); + if (!tty_port_initialized(&hp->port)) + return; + if (C_HUPCL(tty)) if (hp->ops->dtr_rts) hp->ops->dtr_rts(hp, 0); @@ -432,6 +420,7 @@ static void hvc_close(struct tty_struct *tty, struct file * filp) * waking periodically to check chars_in_buffer(). */ tty_wait_until_sent(tty, HVC_CLOSE_WAIT); + tty_port_set_initialized(&hp->port, false); } else { if (hp->port.count < 0) printk(KERN_ERR "hvc_close %X: oops, count is %d\n", @@ -960,13 +949,22 @@ struct hvc_struct *hvc_alloc(uint32_t vtermno, int data, cons_ops[i] == hp->ops) break; - /* no matching slot, just use a counter */ - if (i >= MAX_NR_HVC_CONSOLES) - i = ++last_hvc; + if (i >= MAX_NR_HVC_CONSOLES) { + + /* find 'empty' slot for console */ + for (i = 0; i < MAX_NR_HVC_CONSOLES && vtermnos[i] != -1; i++) { + } + + /* no matching slot, just use a counter */ + if (i == MAX_NR_HVC_CONSOLES) + i = ++last_hvc + MAX_NR_HVC_CONSOLES; + } hp->index = i; - cons_ops[i] = ops; - vtermnos[i] = vtermno; + if (i < MAX_NR_HVC_CONSOLES) { + cons_ops[i] = ops; + vtermnos[i] = vtermno; + } list_add_tail(&(hp->next), &hvc_structs); mutex_unlock(&hvc_structs_mutex); diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index c4e16b31f9ab..18241a78e172 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -665,11 +665,10 @@ static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len, * FIXME: lock against link layer control transmissions */ -static void gsm_data_kick(struct gsm_mux *gsm) +static void gsm_data_kick(struct gsm_mux *gsm, struct gsm_dlci *dlci) { struct gsm_msg *msg, *nmsg; int len; - int skip_sof = 0; list_for_each_entry_safe(msg, nmsg, &gsm->tx_list, list) { if (gsm->constipated && msg->addr) @@ -691,18 +690,23 @@ static void gsm_data_kick(struct gsm_mux *gsm) print_hex_dump_bytes("gsm_data_kick: ", DUMP_PREFIX_OFFSET, gsm->txframe, len); - - if (gsm->output(gsm, gsm->txframe + skip_sof, - len - skip_sof) < 0) + if (gsm->output(gsm, gsm->txframe, len) < 0) break; /* FIXME: Can eliminate one SOF in many more cases */ gsm->tx_bytes -= msg->len; - /* For a burst of frames skip the extra SOF within the - burst */ - skip_sof = 1; list_del(&msg->list); kfree(msg); + + if (dlci) { + tty_port_tty_wakeup(&dlci->port); + } else { + int i = 0; + + for (i = 0; i < NUM_DLCI; i++) + if (gsm->dlci[i]) + tty_port_tty_wakeup(&gsm->dlci[i]->port); + } } } @@ -754,7 +758,7 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) /* Add to the actual output queue */ list_add_tail(&msg->list, &gsm->tx_list); gsm->tx_bytes += msg->len; - gsm_data_kick(gsm); + gsm_data_kick(gsm, dlci); } /** @@ -1215,7 +1219,7 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command, gsm_control_reply(gsm, CMD_FCON, NULL, 0); /* Kick the link in case it is idling */ spin_lock_irqsave(&gsm->tx_lock, flags); - gsm_data_kick(gsm); + gsm_data_kick(gsm, NULL); spin_unlock_irqrestore(&gsm->tx_lock, flags); break; case CMD_FCOFF: @@ -2514,7 +2518,7 @@ static void gsmld_write_wakeup(struct tty_struct *tty) /* Queue poll */ clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); spin_lock_irqsave(&gsm->tx_lock, flags); - gsm_data_kick(gsm); + gsm_data_kick(gsm, NULL); if (gsm->tx_bytes < TX_THRESH_LO) { gsm_dlci_data_sweep(gsm); } diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index e55c79eb6430..98361acd3053 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -968,6 +968,11 @@ static int __init n_hdlc_init(void) } /* end of init_module() */ +#ifdef CONFIG_SPARC +#undef __exitdata +#define __exitdata +#endif + static const char hdlc_unregister_ok[] __exitdata = KERN_INFO "N_HDLC: line discipline unregistered\n"; static const char hdlc_unregister_fail[] __exitdata = diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index 5ba6816ebf81..bbaad2887ce7 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -632,18 +632,21 @@ init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev) tty_port_init(&info->port); info->port.ops = &rocket_port_ops; info->flags &= ~ROCKET_MODE_MASK; - switch (pc104[board][line]) { - case 422: - info->flags |= ROCKET_MODE_RS422; - break; - case 485: - info->flags |= ROCKET_MODE_RS485; - break; - case 232: - default: + if (board < ARRAY_SIZE(pc104) && line < ARRAY_SIZE(pc104_1)) + switch (pc104[board][line]) { + case 422: + info->flags |= ROCKET_MODE_RS422; + break; + case 485: + info->flags |= ROCKET_MODE_RS485; + break; + case 232: + default: + info->flags |= ROCKET_MODE_RS232; + break; + } + else info->flags |= ROCKET_MODE_RS232; - break; - } info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR; if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) { diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c index a0ac16ee6575..a9719858c950 100644 --- a/drivers/tty/serdev/core.c +++ b/drivers/tty/serdev/core.c @@ -582,6 +582,12 @@ static acpi_status acpi_serdev_register_device(struct serdev_controller *ctrl, return AE_OK; } +static const struct acpi_device_id serdev_acpi_devices_blacklist[] = { + { "INT3511", 0 }, + { "INT3512", 0 }, + { }, +}; + static acpi_status acpi_serdev_add_device(acpi_handle handle, u32 level, void *data, void **return_value) { @@ -591,6 +597,10 @@ static acpi_status acpi_serdev_add_device(acpi_handle handle, u32 level, if (acpi_bus_get_device(handle, &adev)) return AE_OK; + /* Skip if black listed */ + if (!acpi_match_device_ids(adev, serdev_acpi_devices_blacklist)) + return AE_OK; + return acpi_serdev_register_device(ctrl, adev); } diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c index d1cdd2ab8b4c..d367803e2044 100644 --- a/drivers/tty/serdev/serdev-ttyport.c +++ b/drivers/tty/serdev/serdev-ttyport.c @@ -265,7 +265,6 @@ struct device *serdev_tty_port_register(struct tty_port *port, struct device *parent, struct tty_driver *drv, int idx) { - const struct tty_port_client_operations *old_ops; struct serdev_controller *ctrl; struct serport *serport; int ret; @@ -284,7 +283,6 @@ struct device *serdev_tty_port_register(struct tty_port *port, ctrl->ops = &ctrl_ops; - old_ops = port->client_ops; port->client_ops = &client_ops; port->client_data = ctrl; @@ -297,7 +295,7 @@ struct device *serdev_tty_port_register(struct tty_port *port, err_reset_data: port->client_data = NULL; - port->client_ops = old_ops; + port->client_ops = &tty_port_default_client_ops; serdev_controller_put(ctrl); return ERR_PTR(ret); @@ -312,8 +310,8 @@ int serdev_tty_port_unregister(struct tty_port *port) return -ENODEV; serdev_controller_remove(ctrl); - port->client_ops = NULL; port->client_data = NULL; + port->client_ops = &tty_port_default_client_ops; serdev_controller_put(ctrl); return 0; diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c index 0438d9a905ce..6ba2efde7252 100644 --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -379,7 +379,6 @@ static int aspeed_vuart_probe(struct platform_device *pdev) port.port.line = rc; port.port.irq = irq_of_parse_and_map(np, 0); - port.port.irqflags = IRQF_SHARED; port.port.handle_irq = aspeed_vuart_handle_irq; port.port.iotype = UPIO_MEM; port.port.type = PORT_16550A; diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c index bd53661103eb..3173d98cb42d 100644 --- a/drivers/tty/serial/8250/8250_bcm2835aux.c +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c @@ -115,7 +115,7 @@ static int bcm2835aux_serial_remove(struct platform_device *pdev) { struct bcm2835aux_data *data = platform_get_drvdata(pdev); - serial8250_unregister_port(data->uart.port.line); + serial8250_unregister_port(data->line); clk_disable_unprepare(data->clk); return 0; diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index e441221e04b9..0c4451f7c4b9 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -173,7 +173,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up) struct hlist_head *h; struct hlist_node *n; struct irq_info *i; - int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; + int ret; mutex_lock(&hash_mutex); @@ -208,9 +208,8 @@ static int serial_link_irq_chain(struct uart_8250_port *up) INIT_LIST_HEAD(&up->list); i->head = &up->list; spin_unlock_irq(&i->lock); - irq_flags |= up->port.irqflags; ret = request_irq(up->port.irq, serial8250_interrupt, - irq_flags, up->port.name, i); + up->port.irqflags, up->port.name, i); if (ret < 0) serial_do_unlink(i, up); } @@ -524,6 +523,7 @@ static void __init serial8250_isa_init_ports(void) */ up->mcr_mask = ~ALPHA_KLUDGE_MCR; up->mcr_force = ALPHA_KLUDGE_MCR; + serial8250_set_defaults(up); } /* chain base port ops to support Remote Supervisor Adapter */ @@ -547,7 +547,6 @@ static void __init serial8250_isa_init_ports(void) port->membase = old_serial_port[i].iomem_base; port->iotype = old_serial_port[i].io_type; port->regshift = old_serial_port[i].iomem_reg_shift; - serial8250_set_defaults(up); port->irqflags |= irqflag; if (serial8250_isa_config != NULL) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 284e8d052fc3..7af6697b760f 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -494,10 +494,10 @@ static int dw8250_probe(struct platform_device *pdev) { struct uart_8250_port uart = {}; struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - int irq = platform_get_irq(pdev, 0); struct uart_port *p = &uart.port; struct device *dev = &pdev->dev; struct dw8250_data *data; + int irq; int err; u32 val; @@ -506,11 +506,9 @@ static int dw8250_probe(struct platform_device *pdev) return -EINVAL; } - if (irq < 0) { - if (irq != -EPROBE_DEFER) - dev_err(dev, "cannot get irq\n"); + irq = platform_get_irq(pdev, 0); + if (irq < 0) return irq; - } spin_lock_init(&p->lock); p->mapbase = regs->start; diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index edd6dfe055bf..4c183889f65e 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -24,6 +24,14 @@ #include "8250.h" +#define PCI_DEVICE_ID_ACCES_COM_2S 0x1052 +#define PCI_DEVICE_ID_ACCES_COM_4S 0x105d +#define PCI_DEVICE_ID_ACCES_COM_8S 0x106c +#define PCI_DEVICE_ID_ACCES_COM232_8 0x10a8 +#define PCI_DEVICE_ID_ACCES_COM_2SM 0x10d2 +#define PCI_DEVICE_ID_ACCES_COM_4SM 0x10db +#define PCI_DEVICE_ID_ACCES_COM_8SM 0x10ea + #define PCI_DEVICE_ID_COMMTECH_4224PCI335 0x0002 #define PCI_DEVICE_ID_COMMTECH_4222PCI335 0x0004 #define PCI_DEVICE_ID_COMMTECH_2324PCI335 0x000a @@ -219,7 +227,17 @@ static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p) * devices will export them as GPIOs, so we pre-configure them safely * as inputs. */ - u8 dir = pcidev->vendor == PCI_VENDOR_ID_EXAR ? 0xff : 0x00; + + u8 dir = 0x00; + + if ((pcidev->vendor == PCI_VENDOR_ID_EXAR) && + (pcidev->subsystem_vendor != PCI_VENDOR_ID_SEALEVEL)) { + // Configure GPIO as inputs for Commtech adapters + dir = 0xff; + } else { + // Configure GPIO as outputs for SeaLevel adapters + dir = 0x00; + } writeb(0x00, p + UART_EXAR_MPIOINT_7_0); writeb(0x00, p + UART_EXAR_MPIOLVL_7_0); @@ -574,6 +592,22 @@ static int __maybe_unused exar_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(exar_pci_pm, exar_suspend, exar_resume); +static const struct exar8250_board acces_com_2x = { + .num_ports = 2, + .setup = pci_xr17c154_setup, +}; + +static const struct exar8250_board acces_com_4x = { + .num_ports = 4, + .setup = pci_xr17c154_setup, +}; + +static const struct exar8250_board acces_com_8x = { + .num_ports = 8, + .setup = pci_xr17c154_setup, +}; + + static const struct exar8250_board pbn_fastcom335_2 = { .num_ports = 2, .setup = pci_fastcom335_setup, @@ -642,6 +676,15 @@ static const struct exar8250_board pbn_exar_XR17V8358 = { } static const struct pci_device_id exar_pci_tbl[] = { + EXAR_DEVICE(ACCESSIO, ACCES_COM_2S, acces_com_2x), + EXAR_DEVICE(ACCESSIO, ACCES_COM_4S, acces_com_4x), + EXAR_DEVICE(ACCESSIO, ACCES_COM_8S, acces_com_8x), + EXAR_DEVICE(ACCESSIO, ACCES_COM232_8, acces_com_8x), + EXAR_DEVICE(ACCESSIO, ACCES_COM_2SM, acces_com_2x), + EXAR_DEVICE(ACCESSIO, ACCES_COM_4SM, acces_com_4x), + EXAR_DEVICE(ACCESSIO, ACCES_COM_8SM, acces_com_8x), + + CONNECT_DEVICE(XR17C152, UART_2_232, pbn_connect), CONNECT_DEVICE(XR17C154, UART_4_232, pbn_connect), CONNECT_DEVICE(XR17C158, UART_8_232, pbn_connect), diff --git a/drivers/tty/serial/8250/8250_men_mcb.c b/drivers/tty/serial/8250/8250_men_mcb.c index 02c5aff58a74..8df89e9cd254 100644 --- a/drivers/tty/serial/8250/8250_men_mcb.c +++ b/drivers/tty/serial/8250/8250_men_mcb.c @@ -72,8 +72,8 @@ static int serial_8250_men_mcb_probe(struct mcb_device *mdev, { struct serial_8250_men_mcb_data *data; struct resource *mem; - unsigned int num_ports; - unsigned int i; + int num_ports; + int i; void __iomem *membase; mem = mcb_get_resource(mdev, IORESOURCE_MEM); @@ -88,7 +88,7 @@ static int serial_8250_men_mcb_probe(struct mcb_device *mdev, dev_dbg(&mdev->dev, "found a 16z%03u with %u ports\n", mdev->id, num_ports); - if (num_ports == 0 || num_ports > 4) { + if (num_ports <= 0 || num_ports > 4) { dev_err(&mdev->dev, "unexpected number of ports: %u\n", num_ports); return -ENODEV; @@ -133,7 +133,7 @@ static int serial_8250_men_mcb_probe(struct mcb_device *mdev, static void serial_8250_men_mcb_remove(struct mcb_device *mdev) { - unsigned int num_ports, i; + int num_ports, i; struct serial_8250_men_mcb_data *data = mcb_get_drvdata(mdev); if (!data) diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index 417c7c810df9..211c483db9a7 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -10,6 +10,7 @@ #include <linux/module.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/serial_8250.h> @@ -70,6 +71,7 @@ struct mtk8250_data { #ifdef CONFIG_SERIAL_8250_DMA enum dma_rx_status rx_status; #endif + int rx_wakeup_irq; }; /* flow control mode */ @@ -312,8 +314,21 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios, } #endif + /* + * Store the requested baud rate before calling the generic 8250 + * set_termios method. Standard 8250 port expects bauds to be + * no higher than (uartclk / 16) so the baud will be clamped if it + * gets out of that bound. Mediatek 8250 port supports speed + * higher than that, therefore we'll get original baud rate back + * after calling the generic set_termios method and recalculate + * the speed later in this method. + */ + baud = tty_termios_baud_rate(termios); + serial8250_do_set_termios(port, termios, old); + tty_termios_encode_baud_rate(termios, baud, baud); + /* * Mediatek UARTs use an extra highspeed register (MTK_UART_HIGHS) * @@ -345,6 +360,11 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios, */ spin_lock_irqsave(&port->lock, flags); + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + /* set DLAB we have cval saved in up->lcr from the call to the core */ serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB); serial_dl_write(up, quot); @@ -551,6 +571,8 @@ static int mtk8250_probe(struct platform_device *pdev) pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); + data->rx_wakeup_irq = platform_get_irq_optional(pdev, 1); + return 0; } @@ -572,15 +594,35 @@ static int mtk8250_remove(struct platform_device *pdev) static int __maybe_unused mtk8250_suspend(struct device *dev) { struct mtk8250_data *data = dev_get_drvdata(dev); + int irq = data->rx_wakeup_irq; + int err; serial8250_suspend_port(data->line); + pinctrl_pm_select_sleep_state(dev); + if (irq >= 0) { + err = enable_irq_wake(irq); + if (err) { + dev_err(dev, + "failed to enable irq wake on IRQ %d: %d\n", + irq, err); + pinctrl_pm_select_default_state(dev); + serial8250_resume_port(data->line); + return err; + } + } + return 0; } static int __maybe_unused mtk8250_resume(struct device *dev) { struct mtk8250_data *data = dev_get_drvdata(dev); + int irq = data->rx_wakeup_irq; + + if (irq >= 0) + disable_irq_wake(irq); + pinctrl_pm_select_default_state(dev); serial8250_resume_port(data->line); diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index 0277479c87e9..c15c0cf059e2 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -171,7 +171,6 @@ static int of_platform_serial_setup(struct platform_device *ofdev, port->type = type; port->uartclk = clk; - port->irqflags |= IRQF_SHARED; if (of_property_read_bool(np, "no-loopback-test")) port->flags |= UPF_SKIP_TEST; diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index df41397de478..bf6118a2f82f 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1690,12 +1690,6 @@ pci_wch_ch38x_setup(struct serial_private *priv, #define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470 #define PCIE_DEVICE_ID_WCH_CH382_2S 0x3253 -#define PCI_VENDOR_ID_PERICOM 0x12D8 -#define PCI_DEVICE_ID_PERICOM_PI7C9X7951 0x7951 -#define PCI_DEVICE_ID_PERICOM_PI7C9X7952 0x7952 -#define PCI_DEVICE_ID_PERICOM_PI7C9X7954 0x7954 -#define PCI_DEVICE_ID_PERICOM_PI7C9X7958 0x7958 - #define PCI_VENDOR_ID_ACCESIO 0x494f #define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB 0x1051 #define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S 0x1053 diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index eb2e2d141c01..5fdeec6089bb 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2253,6 +2253,10 @@ int serial8250_do_startup(struct uart_port *port) } } + /* Check if we need to have shared IRQs */ + if (port->irq && (up->port.flags & UPF_SHARE_IRQ)) + up->port.irqflags |= IRQF_SHARED; + if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) { unsigned char iir1; /* @@ -2624,6 +2628,8 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { + unsigned int tolerance = port->uartclk / 100; + /* * Ask the core to calculate the divisor for us. * Allow 1% tolerance at the upper limit so uart clks marginally @@ -2632,7 +2638,7 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port, */ return uart_get_baud_rate(port, termios, old, port->uartclk / 16 / UART_DIV_MAX, - port->uartclk); + (port->uartclk + tolerance) / 16); } void diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 0d31251e04cc..75b1de40690a 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1107,6 +1107,7 @@ config SERIAL_SIFIVE_CONSOLE bool "Console on SiFive UART" depends on SERIAL_SIFIVE=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON help Select this option if you would like to use a SiFive UART as the system console. diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 89ade213a1a9..1d501154e9f7 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -813,10 +813,8 @@ __acquires(&uap->port.lock) if (!uap->using_tx_dma) return; - /* Avoid deadlock with the DMA engine callback */ - spin_unlock(&uap->port.lock); - dmaengine_terminate_all(uap->dmatx.chan); - spin_lock(&uap->port.lock); + dmaengine_terminate_async(uap->dmatx.chan); + if (uap->dmatx.queued) { dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1, DMA_TO_DEVICE); @@ -2587,6 +2585,7 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap, uap->port.fifosize = uap->fifosize; uap->port.flags = UPF_BOOT_AUTOCONF; uap->port.line = index; + spin_lock_init(&uap->port.lock); amba_ports[index] = uap; diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 3bdd56a1021b..ea12f10610b6 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -286,6 +286,10 @@ static void ar933x_uart_set_termios(struct uart_port *port, ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, AR933X_UART_CS_HOST_INT_EN); + /* enable RX and TX ready overide */ + ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, + AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE); + /* reenable the UART */ ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S, @@ -418,6 +422,10 @@ static int ar933x_uart_startup(struct uart_port *port) ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, AR933X_UART_CS_HOST_INT_EN); + /* enable RX and TX ready overide */ + ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, + AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE); + /* Enable RX interrupts */ up->ier = AR933X_UART_INT_RX_VALID; ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 8e667967928a..dec24d85a2e3 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -618,7 +618,8 @@ static void atmel_stop_tx(struct uart_port *port) atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask); if (atmel_uart_is_half_duplex(port)) - atmel_start_rx(port); + if (!atomic_read(&atmel_port->tasklet_shutdown)) + atmel_start_rx(port); } @@ -2314,27 +2315,6 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, mode |= ATMEL_US_USMODE_NORMAL; } - /* set the mode, clock divisor, parity, stop bits and data size */ - atmel_uart_writel(port, ATMEL_US_MR, mode); - - /* - * when switching the mode, set the RTS line state according to the - * new mode, otherwise keep the former state - */ - if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) { - unsigned int rts_state; - - if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) { - /* let the hardware control the RTS line */ - rts_state = ATMEL_US_RTSDIS; - } else { - /* force RTS line to low level */ - rts_state = ATMEL_US_RTSEN; - } - - atmel_uart_writel(port, ATMEL_US_CR, rts_state); - } - /* * Set the baud rate: * Fractional baudrate allows to setup output frequency more @@ -2361,6 +2341,28 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, if (!(port->iso7816.flags & SER_ISO7816_ENABLED)) atmel_uart_writel(port, ATMEL_US_BRGR, quot); + + /* set the mode, clock divisor, parity, stop bits and data size */ + atmel_uart_writel(port, ATMEL_US_MR, mode); + + /* + * when switching the mode, set the RTS line state according to the + * new mode, otherwise keep the former state + */ + if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) { + unsigned int rts_state; + + if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) { + /* let the hardware control the RTS line */ + rts_state = ATMEL_US_RTSDIS; + } else { + /* force RTS line to low level */ + rts_state = ATMEL_US_RTSEN; + } + + atmel_uart_writel(port, ATMEL_US_CR, rts_state); + } + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN); atmel_port->tx_stopped = false; diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index ea1c85e3b432..42174a0ecd7d 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -378,8 +378,8 @@ static void lpuart_dma_tx(struct lpuart_port *sport) } sport->dma_tx_desc = dmaengine_prep_slave_sg(sport->dma_tx_chan, sgl, - sport->dma_tx_nents, - DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); + ret, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT); if (!sport->dma_tx_desc) { dma_unmap_sg(dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE); dev_err(dev, "Cannot prepare TX slave DMA!\n"); diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index ffefd218761e..31033d517e82 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -1230,6 +1230,9 @@ static int ifx_spi_spi_remove(struct spi_device *spi) struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); /* stop activity */ tasklet_kill(&ifx_dev->io_work_tasklet); + + pm_runtime_disable(&spi->dev); + /* free irq */ free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), ifx_dev); free_irq(gpio_to_irq(ifx_dev->gpio.srdy), ifx_dev); diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 10db3e54ac9e..3a7ad301ee8c 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -609,7 +609,7 @@ static void imx_uart_dma_tx(struct imx_port *sport) sport->tx_bytes = uart_circ_chars_pending(xmit); - if (xmit->tail < xmit->head) { + if (xmit->tail < xmit->head || xmit->head == 0) { sport->dma_tx_nents = 1; sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes); } else { @@ -625,7 +625,7 @@ static void imx_uart_dma_tx(struct imx_port *sport) dev_err(dev, "DMA mapping error for TX.\n"); return; } - desc = dmaengine_prep_slave_sg(chan, sgl, sport->dma_tx_nents, + desc = dmaengine_prep_slave_sg(chan, sgl, ret, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); if (!desc) { dma_unmap_sg(dev, sgl, sport->dma_tx_nents, @@ -706,22 +706,33 @@ static void imx_uart_start_tx(struct uart_port *port) } } -static irqreturn_t imx_uart_rtsint(int irq, void *dev_id) +static irqreturn_t __imx_uart_rtsint(int irq, void *dev_id) { struct imx_port *sport = dev_id; u32 usr1; - spin_lock(&sport->port.lock); - imx_uart_writel(sport, USR1_RTSD, USR1); usr1 = imx_uart_readl(sport, USR1) & USR1_RTSS; uart_handle_cts_change(&sport->port, !!usr1); wake_up_interruptible(&sport->port.state->port.delta_msr_wait); - spin_unlock(&sport->port.lock); return IRQ_HANDLED; } +static irqreturn_t imx_uart_rtsint(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + irqreturn_t ret; + + spin_lock(&sport->port.lock); + + ret = __imx_uart_rtsint(irq, dev_id); + + spin_unlock(&sport->port.lock); + + return ret; +} + static irqreturn_t imx_uart_txint(int irq, void *dev_id) { struct imx_port *sport = dev_id; @@ -732,14 +743,12 @@ static irqreturn_t imx_uart_txint(int irq, void *dev_id) return IRQ_HANDLED; } -static irqreturn_t imx_uart_rxint(int irq, void *dev_id) +static irqreturn_t __imx_uart_rxint(int irq, void *dev_id) { struct imx_port *sport = dev_id; unsigned int rx, flg, ignored = 0; struct tty_port *port = &sport->port.state->port; - spin_lock(&sport->port.lock); - while (imx_uart_readl(sport, USR2) & USR2_RDR) { u32 usr2; @@ -798,11 +807,25 @@ static irqreturn_t imx_uart_rxint(int irq, void *dev_id) } out: - spin_unlock(&sport->port.lock); tty_flip_buffer_push(port); + return IRQ_HANDLED; } +static irqreturn_t imx_uart_rxint(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + irqreturn_t ret; + + spin_lock(&sport->port.lock); + + ret = __imx_uart_rxint(irq, dev_id); + + spin_unlock(&sport->port.lock); + + return ret; +} + static void imx_uart_clear_rx_errors(struct imx_port *sport); /* @@ -861,6 +884,8 @@ static irqreturn_t imx_uart_int(int irq, void *dev_id) unsigned int usr1, usr2, ucr1, ucr2, ucr3, ucr4; irqreturn_t ret = IRQ_NONE; + spin_lock(&sport->port.lock); + usr1 = imx_uart_readl(sport, USR1); usr2 = imx_uart_readl(sport, USR2); ucr1 = imx_uart_readl(sport, UCR1); @@ -894,27 +919,25 @@ static irqreturn_t imx_uart_int(int irq, void *dev_id) usr2 &= ~USR2_ORE; if (usr1 & (USR1_RRDY | USR1_AGTIM)) { - imx_uart_rxint(irq, dev_id); + __imx_uart_rxint(irq, dev_id); ret = IRQ_HANDLED; } if ((usr1 & USR1_TRDY) || (usr2 & USR2_TXDC)) { - imx_uart_txint(irq, dev_id); + imx_uart_transmit_buffer(sport); ret = IRQ_HANDLED; } if (usr1 & USR1_DTRD) { imx_uart_writel(sport, USR1_DTRD, USR1); - spin_lock(&sport->port.lock); imx_uart_mctrl_check(sport); - spin_unlock(&sport->port.lock); ret = IRQ_HANDLED; } if (usr1 & USR1_RTSD) { - imx_uart_rtsint(irq, dev_id); + __imx_uart_rtsint(irq, dev_id); ret = IRQ_HANDLED; } @@ -929,6 +952,8 @@ static irqreturn_t imx_uart_int(int irq, void *dev_id) ret = IRQ_HANDLED; } + spin_unlock(&sport->port.lock); + return ret; } @@ -2221,8 +2246,8 @@ static int imx_uart_probe(struct platform_device *pdev) return PTR_ERR(base); rxirq = platform_get_irq(pdev, 0); - txirq = platform_get_irq(pdev, 1); - rtsirq = platform_get_irq(pdev, 2); + txirq = platform_get_irq_optional(pdev, 1); + rtsirq = platform_get_irq_optional(pdev, 2); sport->port.dev = &pdev->dev; sport->port.mapbase = res->start; diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c index bfe5e9e034ec..53e7e43cc596 100644 --- a/drivers/tty/serial/kgdboc.c +++ b/drivers/tty/serial/kgdboc.c @@ -20,6 +20,7 @@ #include <linux/vt_kern.h> #include <linux/input.h> #include <linux/module.h> +#include <linux/platform_device.h> #define MAX_CONFIG_LEN 40 @@ -27,6 +28,7 @@ static struct kgdb_io kgdboc_io_ops; /* -1 = init not run yet, 0 = unconfigured, 1 = configured. */ static int configured = -1; +static DEFINE_MUTEX(config_mutex); static char config[MAX_CONFIG_LEN]; static struct kparam_string kps = { @@ -38,6 +40,8 @@ static int kgdboc_use_kms; /* 1 if we use kernel mode switching */ static struct tty_driver *kgdb_tty_driver; static int kgdb_tty_line; +static struct platform_device *kgdboc_pdev; + #ifdef CONFIG_KDB_KEYBOARD static int kgdboc_reset_connect(struct input_handler *handler, struct input_dev *dev, @@ -133,11 +137,13 @@ static void kgdboc_unregister_kbd(void) static void cleanup_kgdboc(void) { + if (configured != 1) + return; + if (kgdb_unregister_nmi_console()) return; kgdboc_unregister_kbd(); - if (configured == 1) - kgdb_unregister_io_module(&kgdboc_io_ops); + kgdb_unregister_io_module(&kgdboc_io_ops); } static int configure_kgdboc(void) @@ -200,20 +206,79 @@ nmi_con_failed: kgdb_unregister_io_module(&kgdboc_io_ops); noconfig: kgdboc_unregister_kbd(); - config[0] = 0; configured = 0; - cleanup_kgdboc(); return err; } +static int kgdboc_probe(struct platform_device *pdev) +{ + int ret = 0; + + mutex_lock(&config_mutex); + if (configured != 1) { + ret = configure_kgdboc(); + + /* Convert "no device" to "defer" so we'll keep trying */ + if (ret == -ENODEV) + ret = -EPROBE_DEFER; + } + mutex_unlock(&config_mutex); + + return ret; +} + +static struct platform_driver kgdboc_platform_driver = { + .probe = kgdboc_probe, + .driver = { + .name = "kgdboc", + .suppress_bind_attrs = true, + }, +}; + static int __init init_kgdboc(void) { - /* Already configured? */ - if (configured == 1) + int ret; + + /* + * kgdboc is a little bit of an odd "platform_driver". It can be + * up and running long before the platform_driver object is + * created and thus doesn't actually store anything in it. There's + * only one instance of kgdb so anything is stored as global state. + * The platform_driver is only created so that we can leverage the + * kernel's mechanisms (like -EPROBE_DEFER) to call us when our + * underlying tty is ready. Here we init our platform driver and + * then create the single kgdboc instance. + */ + ret = platform_driver_register(&kgdboc_platform_driver); + if (ret) + return ret; + + kgdboc_pdev = platform_device_alloc("kgdboc", PLATFORM_DEVID_NONE); + if (!kgdboc_pdev) { + ret = -ENOMEM; + goto err_did_register; + } + + ret = platform_device_add(kgdboc_pdev); + if (!ret) return 0; - return configure_kgdboc(); + platform_device_put(kgdboc_pdev); + +err_did_register: + platform_driver_unregister(&kgdboc_platform_driver); + return ret; +} + +static void exit_kgdboc(void) +{ + mutex_lock(&config_mutex); + cleanup_kgdboc(); + mutex_unlock(&config_mutex); + + platform_device_unregister(kgdboc_pdev); + platform_driver_unregister(&kgdboc_platform_driver); } static int kgdboc_get_char(void) @@ -236,24 +301,20 @@ static int param_set_kgdboc_var(const char *kmessage, const struct kernel_param *kp) { size_t len = strlen(kmessage); + int ret = 0; if (len >= MAX_CONFIG_LEN) { pr_err("config string too long\n"); return -ENOSPC; } - /* Only copy in the string if the init function has not run yet */ - if (configured < 0) { - strcpy(config, kmessage); - return 0; - } - if (kgdb_connected) { pr_err("Cannot reconfigure while KGDB is connected.\n"); - return -EBUSY; } + mutex_lock(&config_mutex); + strcpy(config, kmessage); /* Chop out \n char as a result of echo */ if (len && config[len - 1] == '\n') @@ -262,8 +323,30 @@ static int param_set_kgdboc_var(const char *kmessage, if (configured == 1) cleanup_kgdboc(); - /* Go and configure with the new params. */ - return configure_kgdboc(); + /* + * Configure with the new params as long as init already ran. + * Note that we can get called before init if someone loads us + * with "modprobe kgdboc kgdboc=..." or if they happen to use the + * the odd syntax of "kgdboc.kgdboc=..." on the kernel command. + */ + if (configured >= 0) + ret = configure_kgdboc(); + + /* + * If we couldn't configure then clear out the config. Note that + * specifying an invalid config on the kernel command line vs. + * through sysfs have slightly different behaviors. If we fail + * to configure what was specified on the kernel command line + * we'll leave it in the 'config' and return -EPROBE_DEFER from + * our probe. When specified through sysfs userspace is + * responsible for loading the tty driver before setting up. + */ + if (ret) + config[0] = '\0'; + + mutex_unlock(&config_mutex); + + return ret; } static int dbg_restore_graphics; @@ -322,15 +405,8 @@ __setup("kgdboc=", kgdboc_option_setup); /* This is only available if kgdboc is a built in for early debugging */ static int __init kgdboc_early_init(char *opt) { - /* save the first character of the config string because the - * init routine can destroy it. - */ - char save_ch; - kgdboc_option_setup(opt); - save_ch = config[0]; - init_kgdboc(); - config[0] = save_ch; + configure_kgdboc(); return 0; } @@ -338,7 +414,7 @@ early_param("ekgdboc", kgdboc_early_init); #endif /* CONFIG_KGDB_SERIAL_CONSOLE */ module_init(init_kgdboc); -module_exit(cleanup_kgdboc); +module_exit(exit_kgdboc); module_param_call(kgdboc, param_set_kgdboc_var, param_get_string, &kps, 0644); MODULE_PARM_DESC(kgdboc, "<serial_device>[,baud]"); MODULE_DESCRIPTION("KGDB Console TTY Driver"); diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 3657a24913fc..e0718ee5d42a 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -980,6 +980,7 @@ static unsigned int msm_get_mctrl(struct uart_port *port) static void msm_reset(struct uart_port *port) { struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int mr; /* reset everything */ msm_write(port, UART_CR_CMD_RESET_RX, UART_CR); @@ -987,7 +988,10 @@ static void msm_reset(struct uart_port *port) msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR); msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); - msm_write(port, UART_CR_CMD_SET_RFR, UART_CR); + msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR); + mr = msm_read(port, UART_MR1); + mr &= ~UART_MR1_RX_RDY_CTL; + msm_write(port, mr, UART_MR1); /* Disable DM modes */ if (msm_port->is_uartdm) @@ -1576,6 +1580,7 @@ static void __msm_console_write(struct uart_port *port, const char *s, int num_newlines = 0; bool replaced = false; void __iomem *tf; + int locked = 1; if (is_uartdm) tf = port->membase + UARTDM_TF; @@ -1588,7 +1593,13 @@ static void __msm_console_write(struct uart_port *port, const char *s, num_newlines++; count += num_newlines; - spin_lock(&port->lock); + if (port->sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&port->lock); + else + spin_lock(&port->lock); + if (is_uartdm) msm_reset_dm_count(port, count); @@ -1624,7 +1635,9 @@ static void __msm_console_write(struct uart_port *port, const char *s, iowrite32_rep(tf, buf, 1); i += num_chars; } - spin_unlock(&port->lock); + + if (locked) + spin_unlock(&port->lock); } static void msm_console_write(struct console *co, const char *s, diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c index 7e7b1559fa36..c310e2e7c647 100644 --- a/drivers/tty/serial/mvebu-uart.c +++ b/drivers/tty/serial/mvebu-uart.c @@ -851,7 +851,7 @@ static int mvebu_uart_probe(struct platform_device *pdev) port->membase = devm_ioremap_resource(&pdev->dev, reg); if (IS_ERR(port->membase)) - return -PTR_ERR(port->membase); + return PTR_ERR(port->membase); mvuart = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_uart), GFP_KERNEL); diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 4c188f4079b3..63810eefa44b 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -1703,21 +1703,21 @@ static int mxs_auart_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { ret = irq; - goto out_disable_clks; + goto out_iounmap; } s->port.irq = irq; ret = devm_request_irq(&pdev->dev, irq, mxs_auart_irq_handle, 0, dev_name(&pdev->dev), s); if (ret) - goto out_disable_clks; + goto out_iounmap; platform_set_drvdata(pdev, s); ret = mxs_auart_init_gpios(s, &pdev->dev); if (ret) { dev_err(&pdev->dev, "Failed to initialize GPIOs.\n"); - goto out_disable_clks; + goto out_iounmap; } /* @@ -1725,7 +1725,7 @@ static int mxs_auart_probe(struct platform_device *pdev) */ ret = mxs_auart_request_gpio_irq(s); if (ret) - goto out_disable_clks; + goto out_iounmap; auart_port[s->port.line] = s; @@ -1751,6 +1751,9 @@ out_free_qpio_irq: mxs_auart_free_gpio_irq(s); auart_port[pdev->id] = NULL; +out_iounmap: + iounmap(s->port.membase); + out_disable_clks: if (is_asm9260_auart(s)) { clk_disable_unprepare(s->clk); @@ -1766,6 +1769,7 @@ static int mxs_auart_remove(struct platform_device *pdev) uart_remove_one_port(&auart_driver, &s->port); auart_port[pdev->id] = NULL; mxs_auart_free_gpio_irq(s); + iounmap(s->port.membase); if (is_asm9260_auart(s)) { clk_disable_unprepare(s->clk); clk_disable_unprepare(s->clk_ahb); diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c index 29a6dc6a8d23..6a0a1cdfe0a0 100644 --- a/drivers/tty/serial/owl-uart.c +++ b/drivers/tty/serial/owl-uart.c @@ -682,6 +682,12 @@ static int owl_uart_probe(struct platform_device *pdev) return PTR_ERR(owl_port->clk); } + ret = clk_prepare_enable(owl_port->clk); + if (ret) { + dev_err(&pdev->dev, "could not enable clk\n"); + return ret; + } + owl_port->port.dev = &pdev->dev; owl_port->port.line = pdev->id; owl_port->port.type = PORT_OWL; @@ -714,6 +720,7 @@ static int owl_uart_remove(struct platform_device *pdev) uart_remove_one_port(&owl_uart_driver, &owl_port->port); owl_uart_ports[pdev->id] = NULL; + clk_disable_unprepare(owl_port->clk); return 0; } @@ -742,7 +749,7 @@ static int __init owl_uart_init(void) return ret; } -static void __init owl_uart_exit(void) +static void __exit owl_uart_exit(void) { platform_driver_unregister(&owl_uart_platform_driver); uart_unregister_driver(&owl_uart_driver); diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 6157213a8359..c16234bca78f 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -233,6 +233,7 @@ struct eg20t_port { struct dma_chan *chan_rx; struct scatterlist *sg_tx_p; int nent; + int orig_nent; struct scatterlist sg_rx; int tx_dma_use; void *rx_buf_virt; @@ -787,9 +788,10 @@ static void pch_dma_tx_complete(void *arg) } xmit->tail &= UART_XMIT_SIZE - 1; async_tx_ack(priv->desc_tx); - dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE); + dma_unmap_sg(port->dev, sg, priv->orig_nent, DMA_TO_DEVICE); priv->tx_dma_use = 0; priv->nent = 0; + priv->orig_nent = 0; kfree(priv->sg_tx_p); pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); } @@ -1010,6 +1012,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__); return 0; } + priv->orig_nent = num; priv->nent = nent; for (i = 0; i < nent; i++, sg++) { diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 35e5f9c5d5be..6b34833bb3d0 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -125,6 +125,7 @@ static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop); static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop); static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port); static void qcom_geni_serial_stop_rx(struct uart_port *uport); +static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop); static const unsigned long root_freq[] = {7372800, 14745600, 19200000, 29491200, 32000000, 48000000, 64000000, 80000000, @@ -617,7 +618,7 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport) u32 irq_en; u32 status; struct qcom_geni_serial_port *port = to_dev_port(uport, uport); - u32 irq_clear = S_CMD_DONE_EN; + u32 s_irq_status; irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN); irq_en &= ~(S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN); @@ -633,10 +634,19 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport) return; geni_se_cancel_s_cmd(&port->se); - qcom_geni_serial_poll_bit(uport, SE_GENI_S_CMD_CTRL_REG, - S_GENI_CMD_CANCEL, false); + qcom_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS, + S_CMD_CANCEL_EN, true); + /* + * If timeout occurs secondary engine remains active + * and Abort sequence is executed. + */ + s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS); + /* Flush the Rx buffer */ + if (s_irq_status & S_RX_FIFO_LAST_EN) + qcom_geni_serial_handle_rx(uport, true); + writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR); + status = readl(uport->membase + SE_GENI_STATUS); - writel(irq_clear, uport->membase + SE_GENI_S_IRQ_CLEAR); if (status & S_GENI_CMD_ACTIVE) qcom_geni_serial_abort_rx(uport); } diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c index 284623eefaeb..ba5e488a0374 100644 --- a/drivers/tty/serial/rda-uart.c +++ b/drivers/tty/serial/rda-uart.c @@ -817,7 +817,7 @@ static int __init rda_uart_init(void) return ret; } -static void __init rda_uart_exit(void) +static void __exit rda_uart_exit(void) { platform_driver_unregister(&rda_uart_platform_driver); uart_unregister_driver(&rda_uart_driver); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 4223cb496764..d6aa0aafc6c4 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1106,7 +1106,7 @@ static int uart_break_ctl(struct tty_struct *tty, int break_state) if (!uport) goto out; - if (uport->type != PORT_UNKNOWN) + if (uport->type != PORT_UNKNOWN && uport->ops->break_ctl) uport->ops->break_ctl(uport, break_state); ret = 0; out: @@ -2827,6 +2827,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) if (uport->cons && uport->dev) of_console_check(uport->dev->of_node, uport->cons->name, uport->line); + tty_port_link_device(port, drv->tty_driver, uport->line); uart_configure_port(drv, state, uport); port->console = uart_console(uport); diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c index 2b400189be91..54c43e02e375 100644 --- a/drivers/tty/serial/serial_mctrl_gpio.c +++ b/drivers/tty/serial/serial_mctrl_gpio.c @@ -61,6 +61,9 @@ EXPORT_SYMBOL_GPL(mctrl_gpio_set); struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, enum mctrl_gpio_idx gidx) { + if (gpios == NULL) + return NULL; + return gpios->gpio[gidx]; } EXPORT_SYMBOL_GPL(mctrl_gpio_to_gpiod); diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index d18c680aa64b..ab92562d4ea8 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -873,9 +873,16 @@ static void sci_receive_chars(struct uart_port *port) tty_insert_flip_char(tport, c, TTY_NORMAL); } else { for (i = 0; i < count; i++) { - char c = serial_port_in(port, SCxRDR); - - status = serial_port_in(port, SCxSR); + char c; + + if (port->type == PORT_SCIF || + port->type == PORT_HSCIF) { + status = serial_port_in(port, SCxSR); + c = serial_port_in(port, SCxRDR); + } else { + c = serial_port_in(port, SCxRDR); + status = serial_port_in(port, SCxSR); + } if (uart_handle_sysrq_char(port, c)) { count--; i--; continue; @@ -2896,8 +2903,12 @@ static int sci_init_single(struct platform_device *dev, port->mapbase = res->start; sci_port->reg_size = resource_size(res); - for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i) - sci_port->irqs[i] = platform_get_irq(dev, i); + for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i) { + if (i) + sci_port->irqs[i] = platform_get_irq_optional(dev, i); + else + sci_port->irqs[i] = platform_get_irq(dev, i); + } /* The SCI generates several interrupts. They can be muxed together or * connected to different interrupt lines. In the muxed case only one diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c index be4687814353..3d56fb06c96d 100644 --- a/drivers/tty/serial/sifive.c +++ b/drivers/tty/serial/sifive.c @@ -840,6 +840,7 @@ console_initcall(sifive_console_init); static void __ssp_add_console_port(struct sifive_serial_port *ssp) { + spin_lock_init(&ssp->port.lock); sifive_serial_console_ports[ssp->port.line] = ssp; } diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index f49b7d6fbc88..538d7c588cf0 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -671,6 +671,9 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id) if (ims & SPRD_IMSR_TIMEOUT) serial_out(port, SPRD_ICLR, SPRD_ICLR_TIMEOUT); + if (ims & SPRD_IMSR_BREAK_DETECT) + serial_out(port, SPRD_ICLR, SPRD_IMSR_BREAK_DETECT); + if (ims & (SPRD_IMSR_RX_FIFO_FULL | SPRD_IMSR_BREAK_DETECT | SPRD_IMSR_TIMEOUT)) sprd_rx(port); @@ -1083,14 +1086,13 @@ static int sprd_remove(struct platform_device *dev) if (sup) { uart_remove_one_port(&sprd_uart_driver, &sup->port); sprd_port[sup->port.line] = NULL; + sprd_rx_free_buf(sup); sprd_ports_num--; } if (!sprd_ports_num) uart_unregister_driver(&sprd_uart_driver); - sprd_rx_free_buf(sup); - return 0; } diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index efd54a010243..4265f7a696be 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -29,12 +29,14 @@ #define CDNS_UART_TTY_NAME "ttyPS" #define CDNS_UART_NAME "xuartps" +#define CDNS_UART_MAJOR 0 /* use dynamic node allocation */ +#define CDNS_UART_MINOR 0 /* works best with devtmpfs */ +#define CDNS_UART_NR_PORTS 16 #define CDNS_UART_FIFO_SIZE 64 /* FIFO size */ #define CDNS_UART_REGISTER_SPACE 0x1000 /* Rx Trigger level */ static int rx_trigger_level = 56; -static int uartps_major; module_param(rx_trigger_level, uint, S_IRUGO); MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes"); @@ -180,7 +182,6 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); * @pclk: APB clock * @cdns_uart_driver: Pointer to UART driver * @baud: Current baud rate - * @id: Port ID * @clk_rate_change_nb: Notifier block for clock changes * @quirks: Flags for RXBS support. */ @@ -190,7 +191,6 @@ struct cdns_uart { struct clk *pclk; struct uart_driver *cdns_uart_driver; unsigned int baud; - int id; struct notifier_block clk_rate_change_nb; u32 quirks; bool cts_override; @@ -1115,6 +1115,8 @@ static const struct uart_ops cdns_uart_ops = { #endif }; +static struct uart_driver cdns_uart_uart_driver; + #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE /** * cdns_uart_console_putchar - write the character to the FIFO buffer @@ -1254,6 +1256,16 @@ static int cdns_uart_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } + +static struct console cdns_uart_console = { + .name = CDNS_UART_TTY_NAME, + .write = cdns_uart_console_write, + .device = uart_console_device, + .setup = cdns_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, /* Specified on the cmdline (e.g. console=ttyPS ) */ + .data = &cdns_uart_uart_driver, +}; #endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */ #ifdef CONFIG_PM_SLEEP @@ -1385,89 +1397,8 @@ static const struct of_device_id cdns_uart_of_match[] = { }; MODULE_DEVICE_TABLE(of, cdns_uart_of_match); -/* - * Maximum number of instances without alias IDs but if there is alias - * which target "< MAX_UART_INSTANCES" range this ID can't be used. - */ -#define MAX_UART_INSTANCES 32 - -/* Stores static aliases list */ -static DECLARE_BITMAP(alias_bitmap, MAX_UART_INSTANCES); -static int alias_bitmap_initialized; - -/* Stores actual bitmap of allocated IDs with alias IDs together */ -static DECLARE_BITMAP(bitmap, MAX_UART_INSTANCES); -/* Protect bitmap operations to have unique IDs */ -static DEFINE_MUTEX(bitmap_lock); - -static int cdns_get_id(struct platform_device *pdev) -{ - int id, ret; - - mutex_lock(&bitmap_lock); - - /* Alias list is stable that's why get alias bitmap only once */ - if (!alias_bitmap_initialized) { - ret = of_alias_get_alias_list(cdns_uart_of_match, "serial", - alias_bitmap, MAX_UART_INSTANCES); - if (ret && ret != -EOVERFLOW) { - mutex_unlock(&bitmap_lock); - return ret; - } - - alias_bitmap_initialized++; - } - - /* Make sure that alias ID is not taken by instance without alias */ - bitmap_or(bitmap, bitmap, alias_bitmap, MAX_UART_INSTANCES); - - dev_dbg(&pdev->dev, "Alias bitmap: %*pb\n", - MAX_UART_INSTANCES, bitmap); - - /* Look for a serialN alias */ - id = of_alias_get_id(pdev->dev.of_node, "serial"); - if (id < 0) { - dev_warn(&pdev->dev, - "No serial alias passed. Using the first free id\n"); - - /* - * Start with id 0 and check if there is no serial0 alias - * which points to device which is compatible with this driver. - * If alias exists then try next free position. - */ - id = 0; - - for (;;) { - dev_info(&pdev->dev, "Checking id %d\n", id); - id = find_next_zero_bit(bitmap, MAX_UART_INSTANCES, id); - - /* No free empty instance */ - if (id == MAX_UART_INSTANCES) { - dev_err(&pdev->dev, "No free ID\n"); - mutex_unlock(&bitmap_lock); - return -EINVAL; - } - - dev_dbg(&pdev->dev, "The empty id is %d\n", id); - /* Check if ID is empty */ - if (!test_and_set_bit(id, bitmap)) { - /* Break the loop if bit is taken */ - dev_dbg(&pdev->dev, - "Selected ID %d allocation passed\n", - id); - break; - } - dev_dbg(&pdev->dev, - "Selected ID %d allocation failed\n", id); - /* if taking bit fails then try next one */ - id++; - } - } - - mutex_unlock(&bitmap_lock); - - return id; -} +/* Temporary variable for storing number of instances */ +static int instances; /** * cdns_uart_probe - Platform driver probe @@ -1477,16 +1408,11 @@ static int cdns_get_id(struct platform_device *pdev) */ static int cdns_uart_probe(struct platform_device *pdev) { - int rc, irq; + int rc, id, irq; struct uart_port *port; struct resource *res; struct cdns_uart *cdns_uart_data; const struct of_device_id *match; - struct uart_driver *cdns_uart_uart_driver; - char *driver_name; -#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE - struct console *cdns_uart_console; -#endif cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data), GFP_KERNEL); @@ -1496,64 +1422,35 @@ static int cdns_uart_probe(struct platform_device *pdev) if (!port) return -ENOMEM; - cdns_uart_uart_driver = devm_kzalloc(&pdev->dev, - sizeof(*cdns_uart_uart_driver), - GFP_KERNEL); - if (!cdns_uart_uart_driver) - return -ENOMEM; - - cdns_uart_data->id = cdns_get_id(pdev); - if (cdns_uart_data->id < 0) - return cdns_uart_data->id; + /* Look for a serialN alias */ + id = of_alias_get_id(pdev->dev.of_node, "serial"); + if (id < 0) + id = 0; - /* There is a need to use unique driver name */ - driver_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s%d", - CDNS_UART_NAME, cdns_uart_data->id); - if (!driver_name) { - rc = -ENOMEM; - goto err_out_id; + if (id >= CDNS_UART_NR_PORTS) { + dev_err(&pdev->dev, "Cannot get uart_port structure\n"); + return -ENODEV; } - cdns_uart_uart_driver->owner = THIS_MODULE; - cdns_uart_uart_driver->driver_name = driver_name; - cdns_uart_uart_driver->dev_name = CDNS_UART_TTY_NAME; - cdns_uart_uart_driver->major = uartps_major; - cdns_uart_uart_driver->minor = cdns_uart_data->id; - cdns_uart_uart_driver->nr = 1; - + if (!cdns_uart_uart_driver.state) { + cdns_uart_uart_driver.owner = THIS_MODULE; + cdns_uart_uart_driver.driver_name = CDNS_UART_NAME; + cdns_uart_uart_driver.dev_name = CDNS_UART_TTY_NAME; + cdns_uart_uart_driver.major = CDNS_UART_MAJOR; + cdns_uart_uart_driver.minor = CDNS_UART_MINOR; + cdns_uart_uart_driver.nr = CDNS_UART_NR_PORTS; #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE - cdns_uart_console = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_console), - GFP_KERNEL); - if (!cdns_uart_console) { - rc = -ENOMEM; - goto err_out_id; - } - - strncpy(cdns_uart_console->name, CDNS_UART_TTY_NAME, - sizeof(cdns_uart_console->name)); - cdns_uart_console->index = cdns_uart_data->id; - cdns_uart_console->write = cdns_uart_console_write; - cdns_uart_console->device = uart_console_device; - cdns_uart_console->setup = cdns_uart_console_setup; - cdns_uart_console->flags = CON_PRINTBUFFER; - cdns_uart_console->data = cdns_uart_uart_driver; - cdns_uart_uart_driver->cons = cdns_uart_console; + cdns_uart_uart_driver.cons = &cdns_uart_console; #endif - rc = uart_register_driver(cdns_uart_uart_driver); - if (rc < 0) { - dev_err(&pdev->dev, "Failed to register driver\n"); - goto err_out_id; + rc = uart_register_driver(&cdns_uart_uart_driver); + if (rc < 0) { + dev_err(&pdev->dev, "Failed to register driver\n"); + return rc; + } } - cdns_uart_data->cdns_uart_driver = cdns_uart_uart_driver; - - /* - * Setting up proper name_base needs to be done after uart - * registration because tty_driver structure is not filled. - * name_base is 0 by default. - */ - cdns_uart_uart_driver->tty_driver->name_base = cdns_uart_data->id; + cdns_uart_data->cdns_uart_driver = &cdns_uart_uart_driver; match = of_match_node(cdns_uart_of_match, pdev->dev.of_node); if (match && match->data) { @@ -1630,6 +1527,7 @@ static int cdns_uart_probe(struct platform_device *pdev) port->flags = UPF_BOOT_AUTOCONF; port->ops = &cdns_uart_ops; port->fifosize = CDNS_UART_FIFO_SIZE; + port->line = id; /* * Register the port. @@ -1657,11 +1555,13 @@ static int cdns_uart_probe(struct platform_device *pdev) * If register_console() don't assign value, then console_port pointer * is cleanup. */ - if (!console_port) + if (!console_port) { + cdns_uart_console.index = id; console_port = port; + } #endif - rc = uart_add_one_port(cdns_uart_uart_driver, port); + rc = uart_add_one_port(&cdns_uart_uart_driver, port); if (rc) { dev_err(&pdev->dev, "uart_add_one_port() failed; err=%i\n", rc); @@ -1671,13 +1571,17 @@ static int cdns_uart_probe(struct platform_device *pdev) #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE /* This is not port which is used for console that's why clean it up */ if (console_port == port && - !(cdns_uart_uart_driver->cons->flags & CON_ENABLED)) + !(cdns_uart_uart_driver.cons->flags & CON_ENABLED)) { console_port = NULL; + cdns_uart_console.index = -1; + } #endif - uartps_major = cdns_uart_uart_driver->tty_driver->major; cdns_uart_data->cts_override = of_property_read_bool(pdev->dev.of_node, "cts-override"); + + instances++; + return 0; err_out_pm_disable: @@ -1693,12 +1597,8 @@ err_out_clk_disable: err_out_clk_dis_pclk: clk_disable_unprepare(cdns_uart_data->pclk); err_out_unregister_driver: - uart_unregister_driver(cdns_uart_data->cdns_uart_driver); -err_out_id: - mutex_lock(&bitmap_lock); - if (cdns_uart_data->id < MAX_UART_INSTANCES) - clear_bit(cdns_uart_data->id, bitmap); - mutex_unlock(&bitmap_lock); + if (!instances) + uart_unregister_driver(cdns_uart_data->cdns_uart_driver); return rc; } @@ -1721,10 +1621,6 @@ static int cdns_uart_remove(struct platform_device *pdev) #endif rc = uart_remove_one_port(cdns_uart_data->cdns_uart_driver, port); port->mapbase = 0; - mutex_lock(&bitmap_lock); - if (cdns_uart_data->id < MAX_UART_INSTANCES) - clear_bit(cdns_uart_data->id, bitmap); - mutex_unlock(&bitmap_lock); clk_disable_unprepare(cdns_uart_data->uartclk); clk_disable_unprepare(cdns_uart_data->pclk); pm_runtime_disable(&pdev->dev); @@ -1737,13 +1633,8 @@ static int cdns_uart_remove(struct platform_device *pdev) console_port = NULL; #endif - /* If this is last instance major number should be initialized */ - mutex_lock(&bitmap_lock); - if (bitmap_empty(bitmap, MAX_UART_INSTANCES)) - uartps_major = 0; - mutex_unlock(&bitmap_lock); - - uart_unregister_driver(cdns_uart_data->cdns_uart_driver); + if (!--instances) + uart_unregister_driver(cdns_uart_data->cdns_uart_driver); return rc; } diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index e8a9047de451..36f1a4d870eb 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -1334,10 +1334,10 @@ static void throttle(struct tty_struct * tty) DBGINFO(("%s throttle\n", info->device_name)); if (I_IXOFF(tty)) send_xchar(tty, STOP_CHAR(tty)); - if (C_CRTSCTS(tty)) { + if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->signals &= ~SerialSignal_RTS; - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -1359,10 +1359,10 @@ static void unthrottle(struct tty_struct * tty) else send_xchar(tty, START_CHAR(tty)); } - if (C_CRTSCTS(tty)) { + if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->signals |= SerialSignal_RTS; - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -2560,8 +2560,8 @@ static void change_params(struct slgt_info *info) info->read_status_mask = IRQ_RXOVER; if (I_INPCK(info->port.tty)) info->read_status_mask |= MASK_PARITY | MASK_FRAMING; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask |= MASK_BREAK; + if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + info->read_status_mask |= MASK_BREAK; if (I_IGNPAR(info->port.tty)) info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING; if (I_IGNBRK(info->port.tty)) { @@ -3192,7 +3192,7 @@ static int tiocmset(struct tty_struct *tty, info->signals &= ~SerialSignal_DTR; spin_lock_irqsave(&info->lock,flags); - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); return 0; } @@ -3203,7 +3203,7 @@ static int carrier_raised(struct tty_port *port) struct slgt_info *info = container_of(port, struct slgt_info, port); spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_signals(info); spin_unlock_irqrestore(&info->lock,flags); return (info->signals & SerialSignal_DCD) ? 1 : 0; } @@ -3218,7 +3218,7 @@ static void dtr_rts(struct tty_port *port, int on) info->signals |= SerialSignal_RTS | SerialSignal_DTR; else info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c index fcb91bf7a15b..54b897a646d0 100644 --- a/drivers/tty/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -1453,10 +1453,10 @@ static void throttle(struct tty_struct * tty) if (I_IXOFF(tty)) send_xchar(tty, STOP_CHAR(tty)); - if (C_CRTSCTS(tty)) { + if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->serial_signals &= ~SerialSignal_RTS; - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -1482,10 +1482,10 @@ static void unthrottle(struct tty_struct * tty) send_xchar(tty, START_CHAR(tty)); } - if (C_CRTSCTS(tty)) { + if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->serial_signals |= SerialSignal_RTS; - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -2470,7 +2470,7 @@ static void isr_io_pin( SLMP_INFO *info, u16 status ) if (status & SerialSignal_CTS) { if ( debug_level >= DEBUG_LEVEL_ISR ) printk("CTS tx start..."); - info->port.tty->hw_stopped = 0; + info->port.tty->hw_stopped = 0; tx_start(info); info->pending_bh |= BH_TRANSMIT; return; @@ -2479,7 +2479,7 @@ static void isr_io_pin( SLMP_INFO *info, u16 status ) if (!(status & SerialSignal_CTS)) { if ( debug_level >= DEBUG_LEVEL_ISR ) printk("CTS tx stop..."); - info->port.tty->hw_stopped = 1; + info->port.tty->hw_stopped = 1; tx_stop(info); } } @@ -2806,8 +2806,8 @@ static void change_params(SLMP_INFO *info) info->read_status_mask2 = OVRN; if (I_INPCK(info->port.tty)) info->read_status_mask2 |= PE | FRME; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask1 |= BRKD; + if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + info->read_status_mask1 |= BRKD; if (I_IGNPAR(info->port.tty)) info->ignore_status_mask2 |= PE | FRME; if (I_IGNBRK(info->port.tty)) { @@ -3177,7 +3177,7 @@ static int tiocmget(struct tty_struct *tty) unsigned long flags; spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_signals(info); spin_unlock_irqrestore(&info->lock,flags); result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS : 0) | @@ -3215,7 +3215,7 @@ static int tiocmset(struct tty_struct *tty, info->serial_signals &= ~SerialSignal_DTR; spin_lock_irqsave(&info->lock,flags); - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); return 0; @@ -3227,7 +3227,7 @@ static int carrier_raised(struct tty_port *port) unsigned long flags; spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_signals(info); spin_unlock_irqrestore(&info->lock,flags); return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; @@ -3243,7 +3243,7 @@ static void dtr_rts(struct tty_port *port, int on) info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; else info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 033ac7e6a70d..d266dd4bdff1 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2729,9 +2729,11 @@ static int compat_tty_tiocgserial(struct tty_struct *tty, struct serial_struct32 v32; struct serial_struct v; int err; - memset(&v, 0, sizeof(struct serial_struct)); - if (!tty->ops->set_serial) + memset(&v, 0, sizeof(v)); + memset(&v32, 0, sizeof(v32)); + + if (!tty->ops->get_serial) return -ENOTTY; err = tty->ops->get_serial(tty, &v); if (!err) { diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index 044c3cbdcfa4..ea80bf872f54 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -52,10 +52,11 @@ static void tty_port_default_wakeup(struct tty_port *port) } } -static const struct tty_port_client_operations default_client_ops = { +const struct tty_port_client_operations tty_port_default_client_ops = { .receive_buf = tty_port_default_receive_buf, .write_wakeup = tty_port_default_wakeup, }; +EXPORT_SYMBOL_GPL(tty_port_default_client_ops); void tty_port_init(struct tty_port *port) { @@ -68,7 +69,7 @@ void tty_port_init(struct tty_port *port) spin_lock_init(&port->lock); port->close_delay = (50 * HZ) / 100; port->closing_wait = (3000 * HZ) / 100; - port->client_ops = &default_client_ops; + port->client_ops = &tty_port_default_client_ops; kref_init(&port->kref); } EXPORT_SYMBOL(tty_port_init); diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index 515fc095e3b4..568b2171f335 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -127,7 +127,11 @@ static DEFINE_SPINLOCK(func_buf_lock); /* guard 'func_buf' and friends */ static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)]; /* keyboard key bitmap */ static unsigned char shift_down[NR_SHIFT]; /* shift state counters.. */ static bool dead_key_next; -static int npadch = -1; /* -1 or number assembled on pad */ + +/* Handles a number being assembled on the number pad */ +static bool npadch_active; +static unsigned int npadch_value; + static unsigned int diacr; static char rep; /* flag telling character repeat */ @@ -845,12 +849,12 @@ static void k_shift(struct vc_data *vc, unsigned char value, char up_flag) shift_state &= ~(1 << value); /* kludge */ - if (up_flag && shift_state != old_state && npadch != -1) { + if (up_flag && shift_state != old_state && npadch_active) { if (kbd->kbdmode == VC_UNICODE) - to_utf8(vc, npadch); + to_utf8(vc, npadch_value); else - put_queue(vc, npadch & 0xff); - npadch = -1; + put_queue(vc, npadch_value & 0xff); + npadch_active = false; } } @@ -868,7 +872,7 @@ static void k_meta(struct vc_data *vc, unsigned char value, char up_flag) static void k_ascii(struct vc_data *vc, unsigned char value, char up_flag) { - int base; + unsigned int base; if (up_flag) return; @@ -882,10 +886,12 @@ static void k_ascii(struct vc_data *vc, unsigned char value, char up_flag) base = 16; } - if (npadch == -1) - npadch = value; - else - npadch = npadch * base + value; + if (!npadch_active) { + npadch_value = 0; + npadch_active = true; + } + + npadch_value = npadch_value * base + value; } static void k_lock(struct vc_data *vc, unsigned char value, char up_flag) @@ -1491,7 +1497,7 @@ static void kbd_event(struct input_handle *handle, unsigned int event_type, if (event_type == EV_MSC && event_code == MSC_RAW && HW_RAW(handle->dev)) kbd_rawcode(value); - if (event_type == EV_KEY) + if (event_type == EV_KEY && event_code <= KEY_MAX) kbd_keycode(event_code, value, HW_RAW(handle->dev)); spin_unlock(&kbd_event_lock); diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c index 78732feaf65b..7556139cd0da 100644 --- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -16,6 +16,7 @@ #include <linux/tty.h> #include <linux/sched.h> #include <linux/mm.h> +#include <linux/mutex.h> #include <linux/slab.h> #include <linux/types.h> @@ -29,6 +30,8 @@ #include <linux/console.h> #include <linux/tty_flip.h> +#include <linux/sched/signal.h> + /* Don't take this from <ctype.h>: 011-015 on the screen aren't spaces */ #define isspace(c) ((c) == ' ') @@ -43,6 +46,7 @@ static volatile int sel_start = -1; /* cleared by clear_selection */ static int sel_end; static int sel_buffer_lth; static char *sel_buffer; +static DEFINE_MUTEX(sel_lock); /* clear_selection, highlight and highlight_pointer can be called from interrupt (via scrollback/front) */ @@ -84,6 +88,11 @@ void clear_selection(void) } EXPORT_SYMBOL_GPL(clear_selection); +bool vc_is_sel(struct vc_data *vc) +{ + return vc == sel_cons; +} + /* * User settable table: what characters are to be considered alphabetic? * 128 bits. Locked by the console lock. @@ -177,14 +186,14 @@ int set_selection_user(const struct tiocl_selection __user *sel, return set_selection_kernel(&v, tty); } -int set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty) +static int __set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty) { struct vc_data *vc = vc_cons[fg_console].d; int new_sel_start, new_sel_end, spc; char *bp, *obp; int i, ps, pe, multiplier; u32 c; - int mode; + int mode, ret = 0; poke_blanked_console(); @@ -332,7 +341,21 @@ int set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty) } } sel_buffer_lth = bp - sel_buffer; - return 0; + + return ret; +} + +int set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty) +{ + int ret; + + mutex_lock(&sel_lock); + console_lock(); + ret = __set_selection_kernel(v, tty); + console_unlock(); + mutex_unlock(&sel_lock); + + return ret; } EXPORT_SYMBOL_GPL(set_selection_kernel); @@ -350,6 +373,7 @@ int paste_selection(struct tty_struct *tty) unsigned int count; struct tty_ldisc *ld; DECLARE_WAITQUEUE(wait, current); + int ret = 0; console_lock(); poke_blanked_console(); @@ -361,10 +385,17 @@ int paste_selection(struct tty_struct *tty) tty_buffer_lock_exclusive(&vc->port); add_wait_queue(&vc->paste_wait, &wait); + mutex_lock(&sel_lock); while (sel_buffer && sel_buffer_lth > pasted) { set_current_state(TASK_INTERRUPTIBLE); + if (signal_pending(current)) { + ret = -EINTR; + break; + } if (tty_throttled(tty)) { + mutex_unlock(&sel_lock); schedule(); + mutex_lock(&sel_lock); continue; } __set_current_state(TASK_RUNNING); @@ -373,11 +404,12 @@ int paste_selection(struct tty_struct *tty) count); pasted += count; } + mutex_unlock(&sel_lock); remove_wait_queue(&vc->paste_wait, &wait); __set_current_state(TASK_RUNNING); tty_buffer_unlock_exclusive(&vc->port); tty_ldisc_deref(ld); - return 0; + return ret; } EXPORT_SYMBOL_GPL(paste_selection); diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 5c0ca1c24b6f..ec3b59f9bcb3 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -81,6 +81,7 @@ #include <linux/errno.h> #include <linux/kd.h> #include <linux/slab.h> +#include <linux/vmalloc.h> #include <linux/major.h> #include <linux/mm.h> #include <linux/console.h> @@ -350,7 +351,7 @@ static struct uni_screen *vc_uniscr_alloc(unsigned int cols, unsigned int rows) /* allocate everything in one go */ memsize = cols * rows * sizeof(char32_t); memsize += rows * sizeof(char32_t *); - p = kmalloc(memsize, GFP_KERNEL); + p = vmalloc(memsize); if (!p) return NULL; @@ -364,9 +365,14 @@ static struct uni_screen *vc_uniscr_alloc(unsigned int cols, unsigned int rows) return uniscr; } +static void vc_uniscr_free(struct uni_screen *uniscr) +{ + vfree(uniscr); +} + static void vc_uniscr_set(struct vc_data *vc, struct uni_screen *new_uniscr) { - kfree(vc->vc_uni_screen); + vc_uniscr_free(vc->vc_uni_screen); vc->vc_uni_screen = new_uniscr; } @@ -890,8 +896,9 @@ static void hide_softcursor(struct vc_data *vc) static void hide_cursor(struct vc_data *vc) { - if (vc == sel_cons) + if (vc_is_sel(vc)) clear_selection(); + vc->vc_sw->con_cursor(vc, CM_ERASE); hide_softcursor(vc); } @@ -901,7 +908,7 @@ static void set_cursor(struct vc_data *vc) if (!con_is_fg(vc) || console_blanked || vc->vc_mode == KD_GRAPHICS) return; if (vc->vc_deccm) { - if (vc == sel_cons) + if (vc_is_sel(vc)) clear_selection(); add_softcursor(vc); if ((vc->vc_cursor_type & 0x0f) != 1) @@ -936,10 +943,21 @@ static void flush_scrollback(struct vc_data *vc) WARN_CONSOLE_UNLOCKED(); set_origin(vc); - if (vc->vc_sw->con_flush_scrollback) + if (vc->vc_sw->con_flush_scrollback) { vc->vc_sw->con_flush_scrollback(vc); - else + } else if (con_is_visible(vc)) { + /* + * When no con_flush_scrollback method is provided then the + * legacy way for flushing the scrollback buffer is to use + * a side effect of the con_switch method. We do it only on + * the foreground console as background consoles have no + * scrollback buffers in that case and we obviously don't + * want to switch to them. + */ + hide_cursor(vc); vc->vc_sw->con_switch(vc); + set_cursor(vc); + } } /* @@ -1063,10 +1081,30 @@ static void visual_deinit(struct vc_data *vc) module_put(vc->vc_sw->owner); } +static void vc_port_destruct(struct tty_port *port) +{ + struct vc_data *vc = container_of(port, struct vc_data, port); + + kfree(vc); +} + +static const struct tty_port_operations vc_port_ops = { + .destruct = vc_port_destruct, +}; + +/* + * Change # of rows and columns (0 means unchanged/the size of fg_console) + * [this is to be used together with some user program + * like resize that changes the hardware videomode] + */ +#define VC_MAXCOL (32767) +#define VC_MAXROW (32767) + int vc_allocate(unsigned int currcons) /* return 0 on success */ { struct vt_notifier_param param; struct vc_data *vc; + int err; WARN_CONSOLE_UNLOCKED(); @@ -1088,6 +1126,7 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */ vc_cons[currcons].d = vc; tty_port_init(&vc->port); + vc->port.ops = &vc_port_ops; INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK); visual_init(vc, currcons, 1); @@ -1095,6 +1134,11 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */ if (!*vc->vc_uni_pagedir_loc) con_set_default_unimap(vc); + err = -EINVAL; + if (vc->vc_cols > VC_MAXCOL || vc->vc_rows > VC_MAXROW || + vc->vc_screenbuf_size > KMALLOC_MAX_SIZE || !vc->vc_screenbuf_size) + goto err_free; + err = -ENOMEM; vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL); if (!vc->vc_screenbuf) goto err_free; @@ -1113,7 +1157,7 @@ err_free: visual_deinit(vc); kfree(vc); vc_cons[currcons].d = NULL; - return -ENOMEM; + return err; } static inline int resize_screen(struct vc_data *vc, int width, int height, @@ -1128,14 +1172,6 @@ static inline int resize_screen(struct vc_data *vc, int width, int height, return err; } -/* - * Change # of rows and columns (0 means unchanged/the size of fg_console) - * [this is to be used together with some user program - * like resize that changes the hardware videomode] - */ -#define VC_RESIZE_MAXCOL (32767) -#define VC_RESIZE_MAXROW (32767) - /** * vc_do_resize - resizing method for the tty * @tty: tty being resized @@ -1171,7 +1207,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, user = vc->vc_resize_user; vc->vc_resize_user = 0; - if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW) + if (cols > VC_MAXCOL || lines > VC_MAXROW) return -EINVAL; new_cols = (cols ? cols : vc->vc_cols); @@ -1182,7 +1218,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, if (new_cols == vc->vc_cols && new_rows == vc->vc_rows) return 0; - if (new_screen_size > (4 << 20)) + if (new_screen_size > KMALLOC_MAX_SIZE || !new_screen_size) return -EINVAL; newscreen = kzalloc(new_screen_size, GFP_USER); if (!newscreen) @@ -1196,7 +1232,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, } } - if (vc == sel_cons) + if (vc_is_sel(vc)) clear_selection(); old_rows = vc->vc_rows; @@ -1205,7 +1241,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, err = resize_screen(vc, new_cols, new_rows, user); if (err) { kfree(newscreen); - kfree(new_uniscr); + vc_uniscr_free(new_uniscr); return err; } @@ -3035,10 +3071,8 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) switch (type) { case TIOCL_SETSEL: - console_lock(); ret = set_selection_user((struct tiocl_selection __user *)(p+1), tty); - console_unlock(); break; case TIOCL_PASTESEL: ret = paste_selection(tty); @@ -3244,6 +3278,7 @@ static int con_install(struct tty_driver *driver, struct tty_struct *tty) tty->driver_data = vc; vc->port.tty = tty; + tty_port_get(&vc->port); if (!tty->winsize.ws_row && !tty->winsize.ws_col) { tty->winsize.ws_row = vc_cons[currcons].d->vc_rows; @@ -3279,6 +3314,13 @@ static void con_shutdown(struct tty_struct *tty) console_unlock(); } +static void con_cleanup(struct tty_struct *tty) +{ + struct vc_data *vc = tty->driver_data; + + tty_port_put(&vc->port); +} + static int default_color = 7; /* white */ static int default_italic_color = 2; // green (ASCII) static int default_underline_color = 3; // cyan (ASCII) @@ -3360,6 +3402,7 @@ static int __init con_init(void) INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK); tty_port_init(&vc->port); visual_init(vc, currcons, 1); + /* Assuming vc->vc_{cols,rows,screenbuf_size} are sane here. */ vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT); vc_init(vc, vc->vc_rows, vc->vc_cols, currcons || !vc->vc_sw->con_save_screen); @@ -3403,7 +3446,8 @@ static const struct tty_operations con_ops = { .throttle = con_throttle, .unthrottle = con_unthrottle, .resize = vt_resize, - .shutdown = con_shutdown + .shutdown = con_shutdown, + .cleanup = con_cleanup, }; static struct cdev vc0_cdev; diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 8b0ed139592f..daf61c28ba76 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -39,11 +39,32 @@ #include <linux/kbd_diacr.h> #include <linux/selection.h> -char vt_dont_switch; -extern struct tty_driver *console_driver; +bool vt_dont_switch; -#define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count) -#define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons) +static inline bool vt_in_use(unsigned int i) +{ + const struct vc_data *vc = vc_cons[i].d; + + /* + * console_lock must be held to prevent the vc from being deallocated + * while we're checking whether it's in-use. + */ + WARN_CONSOLE_UNLOCKED(); + + return vc && kref_read(&vc->port.kref) > 1; +} + +static inline bool vt_busy(int i) +{ + if (vt_in_use(i)) + return true; + if (i == fg_console) + return true; + if (vc_is_sel(vc_cons[i].d)) + return true; + + return false; +} /* * Console (vt and kd) routines, as defined by USL SVR4 manual, and by @@ -289,16 +310,14 @@ static int vt_disallocate(unsigned int vc_num) int ret = 0; console_lock(); - if (VT_BUSY(vc_num)) + if (vt_busy(vc_num)) ret = -EBUSY; else if (vc_num) vc = vc_deallocate(vc_num); console_unlock(); - if (vc && vc_num >= MIN_NR_CONSOLES) { - tty_port_destroy(&vc->port); - kfree(vc); - } + if (vc && vc_num >= MIN_NR_CONSOLES) + tty_port_put(&vc->port); return ret; } @@ -311,17 +330,15 @@ static void vt_disallocate_all(void) console_lock(); for (i = 1; i < MAX_NR_CONSOLES; i++) - if (!VT_BUSY(i)) + if (!vt_busy(i)) vc[i] = vc_deallocate(i); else vc[i] = NULL; console_unlock(); for (i = 1; i < MAX_NR_CONSOLES; i++) { - if (vc[i] && i >= MIN_NR_CONSOLES) { - tty_port_destroy(&vc[i]->port); - kfree(vc[i]); - } + if (vc[i] && i >= MIN_NR_CONSOLES) + tty_port_put(&vc[i]->port); } } @@ -335,22 +352,13 @@ int vt_ioctl(struct tty_struct *tty, { struct vc_data *vc = tty->driver_data; struct console_font_op op; /* used in multiple places here */ - unsigned int console; + unsigned int console = vc->vc_num; unsigned char ucval; unsigned int uival; void __user *up = (void __user *)arg; int i, perm; int ret = 0; - console = vc->vc_num; - - - if (!vc_cons_allocated(console)) { /* impossible? */ - ret = -ENOIOCTLCMD; - goto out; - } - - /* * To have permissions to do most of the vt ioctls, we either have * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG. @@ -641,15 +649,16 @@ int vt_ioctl(struct tty_struct *tty, struct vt_stat __user *vtstat = up; unsigned short state, mask; - /* Review: FIXME: Console lock ? */ if (put_user(fg_console + 1, &vtstat->v_active)) ret = -EFAULT; else { state = 1; /* /dev/tty0 is always open */ + console_lock(); /* required by vt_in_use() */ for (i = 0, mask = 2; i < MAX_NR_CONSOLES && mask; ++i, mask <<= 1) - if (VT_IS_IN_USE(i)) + if (vt_in_use(i)) state |= mask; + console_unlock(); ret = put_user(state, &vtstat->v_state); } break; @@ -659,10 +668,11 @@ int vt_ioctl(struct tty_struct *tty, * Returns the first available (non-opened) console. */ case VT_OPENQRY: - /* FIXME: locking ? - but then this is a stupid API */ + console_lock(); /* required by vt_in_use() */ for (i = 0; i < MAX_NR_CONSOLES; ++i) - if (! VT_IS_IN_USE(i)) + if (!vt_in_use(i)) break; + console_unlock(); uival = i < MAX_NR_CONSOLES ? (i+1) : -1; goto setint; @@ -876,15 +886,20 @@ int vt_ioctl(struct tty_struct *tty, return -EINVAL; for (i = 0; i < MAX_NR_CONSOLES; i++) { + struct vc_data *vcp; + if (!vc_cons[i].d) continue; console_lock(); - if (v.v_vlin) - vc_cons[i].d->vc_scan_lines = v.v_vlin; - if (v.v_clin) - vc_cons[i].d->vc_font.height = v.v_clin; - vc_cons[i].d->vc_resize_user = 1; - vc_resize(vc_cons[i].d, v.v_cols, v.v_rows); + vcp = vc_cons[i].d; + if (vcp) { + if (v.v_vlin) + vcp->vc_scan_lines = v.v_vlin; + if (v.v_clin) + vcp->vc_font.height = v.v_clin; + vcp->vc_resize_user = 1; + vc_resize(vcp, v.v_cols, v.v_rows); + } console_unlock(); } break; @@ -1006,12 +1021,12 @@ int vt_ioctl(struct tty_struct *tty, case VT_LOCKSWITCH: if (!capable(CAP_SYS_TTY_CONFIG)) return -EPERM; - vt_dont_switch = 1; + vt_dont_switch = true; break; case VT_UNLOCKSWITCH: if (!capable(CAP_SYS_TTY_CONFIG)) return -EPERM; - vt_dont_switch = 0; + vt_dont_switch = false; break; case VT_GETHIFONTMASK: ret = put_user(vc->vc_hi_font_mask, @@ -1175,14 +1190,9 @@ long vt_compat_ioctl(struct tty_struct *tty, { struct vc_data *vc = tty->driver_data; struct console_font_op op; /* used in multiple places here */ - unsigned int console = vc->vc_num; void __user *up = compat_ptr(arg); int perm; - - if (!vc_cons_allocated(console)) /* impossible? */ - return -ENOIOCTLCMD; - /* * To have permissions to do most of the vt ioctls, we either have * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG. |