diff options
Diffstat (limited to 'drivers/tty/serial/8250/8250_exar.c')
-rw-r--r-- | drivers/tty/serial/8250/8250_exar.c | 45 |
1 files changed, 44 insertions, 1 deletions
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index edd6dfe055bf..4c183889f65e 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -24,6 +24,14 @@ #include "8250.h" +#define PCI_DEVICE_ID_ACCES_COM_2S 0x1052 +#define PCI_DEVICE_ID_ACCES_COM_4S 0x105d +#define PCI_DEVICE_ID_ACCES_COM_8S 0x106c +#define PCI_DEVICE_ID_ACCES_COM232_8 0x10a8 +#define PCI_DEVICE_ID_ACCES_COM_2SM 0x10d2 +#define PCI_DEVICE_ID_ACCES_COM_4SM 0x10db +#define PCI_DEVICE_ID_ACCES_COM_8SM 0x10ea + #define PCI_DEVICE_ID_COMMTECH_4224PCI335 0x0002 #define PCI_DEVICE_ID_COMMTECH_4222PCI335 0x0004 #define PCI_DEVICE_ID_COMMTECH_2324PCI335 0x000a @@ -219,7 +227,17 @@ static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p) * devices will export them as GPIOs, so we pre-configure them safely * as inputs. */ - u8 dir = pcidev->vendor == PCI_VENDOR_ID_EXAR ? 0xff : 0x00; + + u8 dir = 0x00; + + if ((pcidev->vendor == PCI_VENDOR_ID_EXAR) && + (pcidev->subsystem_vendor != PCI_VENDOR_ID_SEALEVEL)) { + // Configure GPIO as inputs for Commtech adapters + dir = 0xff; + } else { + // Configure GPIO as outputs for SeaLevel adapters + dir = 0x00; + } writeb(0x00, p + UART_EXAR_MPIOINT_7_0); writeb(0x00, p + UART_EXAR_MPIOLVL_7_0); @@ -574,6 +592,22 @@ static int __maybe_unused exar_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(exar_pci_pm, exar_suspend, exar_resume); +static const struct exar8250_board acces_com_2x = { + .num_ports = 2, + .setup = pci_xr17c154_setup, +}; + +static const struct exar8250_board acces_com_4x = { + .num_ports = 4, + .setup = pci_xr17c154_setup, +}; + +static const struct exar8250_board acces_com_8x = { + .num_ports = 8, + .setup = pci_xr17c154_setup, +}; + + static const struct exar8250_board pbn_fastcom335_2 = { .num_ports = 2, .setup = pci_fastcom335_setup, @@ -642,6 +676,15 @@ static const struct exar8250_board pbn_exar_XR17V8358 = { } static const struct pci_device_id exar_pci_tbl[] = { + EXAR_DEVICE(ACCESSIO, ACCES_COM_2S, acces_com_2x), + EXAR_DEVICE(ACCESSIO, ACCES_COM_4S, acces_com_4x), + EXAR_DEVICE(ACCESSIO, ACCES_COM_8S, acces_com_8x), + EXAR_DEVICE(ACCESSIO, ACCES_COM232_8, acces_com_8x), + EXAR_DEVICE(ACCESSIO, ACCES_COM_2SM, acces_com_2x), + EXAR_DEVICE(ACCESSIO, ACCES_COM_4SM, acces_com_4x), + EXAR_DEVICE(ACCESSIO, ACCES_COM_8SM, acces_com_8x), + + CONNECT_DEVICE(XR17C152, UART_2_232, pbn_connect), CONNECT_DEVICE(XR17C154, UART_4_232, pbn_connect), CONNECT_DEVICE(XR17C158, UART_8_232, pbn_connect), |