diff options
Diffstat (limited to 'drivers/platform/x86/thinkpad_acpi.c')
| -rw-r--r-- | drivers/platform/x86/thinkpad_acpi.c | 65 |
1 files changed, 41 insertions, 24 deletions
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 98bd8213b037..1036ec368dda 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -1198,15 +1198,6 @@ static int tpacpi_rfk_update_swstate(const struct tpacpi_rfk *tp_rfk) return status; } -/* Query FW and update rfkill sw state for all rfkill switches */ -static void tpacpi_rfk_update_swstate_all(void) -{ - unsigned int i; - - for (i = 0; i < TPACPI_RFK_SW_MAX; i++) - tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[i]); -} - /* * Sync the HW-blocking state of all rfkill switches, * do notice it causes the rfkill core to schedule uevents @@ -3145,9 +3136,6 @@ static void tpacpi_send_radiosw_update(void) if (wlsw == TPACPI_RFK_RADIO_OFF) tpacpi_rfk_update_hwblock_state(true); - /* Sync sw blocking state */ - tpacpi_rfk_update_swstate_all(); - /* Sync hw blocking state last if it is hw-unblocked */ if (wlsw == TPACPI_RFK_RADIO_ON) tpacpi_rfk_update_hwblock_state(false); @@ -3242,7 +3230,14 @@ static int hotkey_init_tablet_mode(void) in_tablet_mode = hotkey_gmms_get_tablet_mode(res, &has_tablet_mode); - if (has_tablet_mode) + /* + * The Yoga 11e series has 2 accelerometers described by a + * BOSC0200 ACPI node. This setup relies on a Windows service + * which calls special ACPI methods on this node to report + * the laptop/tent/tablet mode to the EC. The bmc150 iio driver + * does not support this, so skip the hotkey on these models. + */ + if (has_tablet_mode && !acpi_dev_present("BOSC0200", "1", -1)) tp_features.hotkey_tablet = TP_HOTKEY_TABLET_USES_GMMS; type = "GMMS"; } else if (acpi_evalf(hkey_handle, &res, "MHKG", "qd")) { @@ -4095,13 +4090,19 @@ static bool hotkey_notify_6xxx(const u32 hkey, case TP_HKEY_EV_KEY_NUMLOCK: case TP_HKEY_EV_KEY_FN: - case TP_HKEY_EV_KEY_FN_ESC: /* key press events, we just ignore them as long as the EC * is still reporting them in the normal keyboard stream */ *send_acpi_ev = false; *ignore_acpi_ev = true; return true; + case TP_HKEY_EV_KEY_FN_ESC: + /* Get the media key status to foce the status LED to update */ + acpi_evalf(hkey_handle, NULL, "GMKS", "v"); + *send_acpi_ev = false; + *ignore_acpi_ev = true; + return true; + case TP_HKEY_EV_TABLET_CHANGED: tpacpi_input_send_tabletsw(); hotkey_tablet_mode_notify_change(); @@ -4251,6 +4252,7 @@ static void hotkey_resume(void) pr_err("error while attempting to reset the event firmware interface\n"); tpacpi_send_radiosw_update(); + tpacpi_input_send_tabletsw(); hotkey_tablet_mode_notify_change(); hotkey_wakeup_reason_notify_change(); hotkey_wakeup_hotunplug_complete_notify_change(); @@ -6286,6 +6288,7 @@ enum thermal_access_mode { enum { /* TPACPI_THERMAL_TPEC_* */ TP_EC_THERMAL_TMP0 = 0x78, /* ACPI EC regs TMP 0..7 */ TP_EC_THERMAL_TMP8 = 0xC0, /* ACPI EC regs TMP 8..15 */ + TP_EC_FUNCREV = 0xEF, /* ACPI EC Functional revision */ TP_EC_THERMAL_TMP_NA = -128, /* ACPI EC sensor not available */ TPACPI_THERMAL_SENSOR_NA = -128000, /* Sensor not available */ @@ -6484,7 +6487,7 @@ static const struct attribute_group thermal_temp_input8_group = { static int __init thermal_init(struct ibm_init_struct *iibm) { - u8 t, ta1, ta2; + u8 t, ta1, ta2, ver = 0; int i; int acpi_tmp7; int res; @@ -6499,7 +6502,14 @@ static int __init thermal_init(struct ibm_init_struct *iibm) * 0x78-0x7F, 0xC0-0xC7. Registers return 0x00 for * non-implemented, thermal sensors return 0x80 when * not available + * The above rule is unfortunately flawed. This has been seen with + * 0xC2 (power supply ID) causing thermal control problems. + * The EC version can be determined by offset 0xEF and at least for + * version 3 the Lenovo firmware team confirmed that registers 0xC0-0xC7 + * are not thermal registers. */ + if (!acpi_ec_read(TP_EC_FUNCREV, &ver)) + pr_warn("Thinkpad ACPI EC unable to access EC version\n"); ta1 = ta2 = 0; for (i = 0; i < 8; i++) { @@ -6509,11 +6519,13 @@ static int __init thermal_init(struct ibm_init_struct *iibm) ta1 = 0; break; } - if (acpi_ec_read(TP_EC_THERMAL_TMP8 + i, &t)) { - ta2 |= t; - } else { - ta1 = 0; - break; + if (ver < 3) { + if (acpi_ec_read(TP_EC_THERMAL_TMP8 + i, &t)) { + ta2 |= t; + } else { + ta1 = 0; + break; + } } } if (ta1 == 0) { @@ -6526,9 +6538,12 @@ static int __init thermal_init(struct ibm_init_struct *iibm) thermal_read_mode = TPACPI_THERMAL_NONE; } } else { - thermal_read_mode = - (ta2 != 0) ? - TPACPI_THERMAL_TPEC_16 : TPACPI_THERMAL_TPEC_8; + if (ver >= 3) + thermal_read_mode = TPACPI_THERMAL_TPEC_8; + else + thermal_read_mode = + (ta2 != 0) ? + TPACPI_THERMAL_TPEC_16 : TPACPI_THERMAL_TPEC_8; } } else if (acpi_tmp7) { if (tpacpi_is_ibm() && @@ -9097,7 +9112,7 @@ static int fan_write_cmd_level(const char *cmd, int *rc) if (strlencmp(cmd, "level auto") == 0) level = TP_EC_FAN_AUTO; - else if ((strlencmp(cmd, "level disengaged") == 0) | + else if ((strlencmp(cmd, "level disengaged") == 0) || (strlencmp(cmd, "level full-speed") == 0)) level = TP_EC_FAN_FULLSPEED; else if (sscanf(cmd, "level %d", &level) != 1) @@ -9684,11 +9699,13 @@ static const struct tpacpi_quirk battery_quirk_table[] __initconst = { * Individual addressing is broken on models that expose the * primary battery as BAT1. */ + TPACPI_Q_LNV('8', 'F', true), /* Thinkpad X120e */ TPACPI_Q_LNV('J', '7', true), /* B5400 */ TPACPI_Q_LNV('J', 'I', true), /* Thinkpad 11e */ TPACPI_Q_LNV3('R', '0', 'B', true), /* Thinkpad 11e gen 3 */ TPACPI_Q_LNV3('R', '0', 'C', true), /* Thinkpad 13 */ TPACPI_Q_LNV3('R', '0', 'J', true), /* Thinkpad 13 gen 2 */ + TPACPI_Q_LNV3('R', '0', 'K', true), /* Thinkpad 11e gen 4 celeron BIOS */ }; static int __init tpacpi_battery_init(struct ibm_init_struct *ibm) |