diff options
Diffstat (limited to 'drivers/pinctrl')
| -rw-r--r-- | drivers/pinctrl/bcm/pinctrl-bcm2835.c | 6 | ||||
| -rw-r--r-- | drivers/pinctrl/cirrus/pinctrl-madera-core.c | 2 | ||||
| -rw-r--r-- | drivers/pinctrl/pinctrl-lpc18xx.c | 10 | ||||
| -rw-r--r-- | drivers/pinctrl/pinctrl-zynq.c | 9 | ||||
| -rw-r--r-- | drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 21 | ||||
| -rw-r--r-- | drivers/pinctrl/sunxi/pinctrl-sunxi.c | 11 |
6 files changed, 32 insertions, 27 deletions
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c index 08925d24180b..1bd3c10ce189 100644 --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c @@ -72,10 +72,8 @@ #define GPIO_REG_OFFSET(p) ((p) / 32) #define GPIO_REG_SHIFT(p) ((p) % 32) -enum bcm2835_pinconf_param { - /* argument: bcm2835_pinconf_pull */ - BCM2835_PINCONF_PARAM_PULL = (PIN_CONFIG_END + 1), -}; +/* argument: bcm2835_pinconf_pull */ +#define BCM2835_PINCONF_PARAM_PULL (PIN_CONFIG_END + 1) struct bcm2835_pinctrl { struct device *dev; diff --git a/drivers/pinctrl/cirrus/pinctrl-madera-core.c b/drivers/pinctrl/cirrus/pinctrl-madera-core.c index c4f4d904e4a6..618e04407ac8 100644 --- a/drivers/pinctrl/cirrus/pinctrl-madera-core.c +++ b/drivers/pinctrl/cirrus/pinctrl-madera-core.c @@ -608,7 +608,7 @@ static int madera_mux_set_mux(struct pinctrl_dev *pctldev, unsigned int n_chip_groups = priv->chip->n_pin_groups; const char *func_name = madera_mux_funcs[selector].name; unsigned int reg; - int i, ret; + int i, ret = 0; dev_dbg(priv->dev, "%s selecting %u (%s) for group %u (%s)\n", __func__, selector, func_name, group, diff --git a/drivers/pinctrl/pinctrl-lpc18xx.c b/drivers/pinctrl/pinctrl-lpc18xx.c index 190f17e4bbda..1d3b88e6ab86 100644 --- a/drivers/pinctrl/pinctrl-lpc18xx.c +++ b/drivers/pinctrl/pinctrl-lpc18xx.c @@ -630,14 +630,8 @@ static const struct pinctrl_pin_desc lpc18xx_pins[] = { LPC18XX_PIN(i2c0_sda, PIN_I2C0_SDA), }; -/** - * enum lpc18xx_pin_config_param - possible pin configuration parameters - * @PIN_CONFIG_GPIO_PIN_INT: route gpio to the gpio pin interrupt - * controller. - */ -enum lpc18xx_pin_config_param { - PIN_CONFIG_GPIO_PIN_INT = PIN_CONFIG_END + 1, -}; +/* PIN_CONFIG_GPIO_PIN_INT: route gpio to the gpio pin interrupt controller */ +#define PIN_CONFIG_GPIO_PIN_INT (PIN_CONFIG_END + 1) static const struct pinconf_generic_params lpc18xx_params[] = { {"nxp,gpio-pin-interrupt", PIN_CONFIG_GPIO_PIN_INT, 0}, diff --git a/drivers/pinctrl/pinctrl-zynq.c b/drivers/pinctrl/pinctrl-zynq.c index a0daf27042bd..90fd37e8207b 100644 --- a/drivers/pinctrl/pinctrl-zynq.c +++ b/drivers/pinctrl/pinctrl-zynq.c @@ -971,15 +971,12 @@ enum zynq_io_standards { zynq_iostd_max }; -/** - * enum zynq_pin_config_param - possible pin configuration parameters - * @PIN_CONFIG_IOSTANDARD: if the pin can select an IO standard, the argument to +/* + * PIN_CONFIG_IOSTANDARD: if the pin can select an IO standard, the argument to * this parameter (on a custom format) tells the driver which alternative * IO standard to use. */ -enum zynq_pin_config_param { - PIN_CONFIG_IOSTANDARD = PIN_CONFIG_END + 1, -}; +#define PIN_CONFIG_IOSTANDARD (PIN_CONFIG_END + 1) static const struct pinconf_generic_params zynq_dt_params[] = { {"io-standard", PIN_CONFIG_IOSTANDARD, zynq_iostd_lvcmos18}, diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index cf82db78e69e..0c30f5eb4c71 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -1028,10 +1028,23 @@ static int pmic_gpio_probe(struct platform_device *pdev) return ret; } - ret = gpiochip_add_pin_range(&state->chip, dev_name(dev), 0, 0, npins); - if (ret) { - dev_err(dev, "failed to add pin range\n"); - goto err_range; + /* + * For DeviceTree-supported systems, the gpio core checks the + * pinctrl's device node for the "gpio-ranges" property. + * If it is present, it takes care of adding the pin ranges + * for the driver. In this case the driver can skip ahead. + * + * In order to remain compatible with older, existing DeviceTree + * files which don't set the "gpio-ranges" property or systems that + * utilize ACPI the driver has to call gpiochip_add_pin_range(). + */ + if (!of_property_read_bool(dev->of_node, "gpio-ranges")) { + ret = gpiochip_add_pin_range(&state->chip, dev_name(dev), 0, 0, + npins); + if (ret) { + dev_err(dev, "failed to add pin range\n"); + goto err_range; + } } return 0; diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c index 26ebedc1f6d3..61aaaf58c599 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c @@ -1042,6 +1042,7 @@ static int sunxi_pinctrl_add_function(struct sunxi_pinctrl *pctl, static int sunxi_pinctrl_build_state(struct platform_device *pdev) { struct sunxi_pinctrl *pctl = platform_get_drvdata(pdev); + void *ptr; int i; /* @@ -1108,13 +1109,15 @@ static int sunxi_pinctrl_build_state(struct platform_device *pdev) } /* And now allocated and fill the array for real */ - pctl->functions = krealloc(pctl->functions, - pctl->nfunctions * sizeof(*pctl->functions), - GFP_KERNEL); - if (!pctl->functions) { + ptr = krealloc(pctl->functions, + pctl->nfunctions * sizeof(*pctl->functions), + GFP_KERNEL); + if (!ptr) { kfree(pctl->functions); + pctl->functions = NULL; return -ENOMEM; } + pctl->functions = ptr; for (i = 0; i < pctl->desc->npins; i++) { const struct sunxi_desc_pin *pin = pctl->desc->pins + i; |