diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e100.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e100.c | 34 |
1 files changed, 21 insertions, 13 deletions
diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index 90974462743b..20961985ed12 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -1423,7 +1423,7 @@ static int e100_phy_check_without_mii(struct nic *nic) u8 phy_type; int without_mii; - phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f; + phy_type = (le16_to_cpu(nic->eeprom[eeprom_phy_iface]) >> 8) & 0x0f; switch (phy_type) { case NoSuchPhy: /* Non-MII PHY; UNTESTED! */ @@ -1543,7 +1543,7 @@ static int e100_phy_init(struct nic *nic) mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr); } else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) && (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) && - (nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) { + (le16_to_cpu(nic->eeprom[eeprom_cnfg_mdix]) & eeprom_mdix_enabled))) { /* enable/disable MDI/MDI-X auto-switching. */ mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH); @@ -2290,9 +2290,9 @@ static int e100_asf(struct nic *nic) { /* ASF can be enabled from eeprom */ return (nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) && - (nic->eeprom[eeprom_config_asf] & eeprom_asf) && - !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) && - ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE); + (le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_asf) && + !(le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_gcl) && + ((le16_to_cpu(nic->eeprom[eeprom_smbus_addr]) & 0xFF) != 0xFE); } static int e100_up(struct nic *nic) @@ -2459,11 +2459,15 @@ static void e100_get_drvinfo(struct net_device *netdev, sizeof(info->bus_info)); } -#define E100_PHY_REGS 0x1C +#define E100_PHY_REGS 0x1D static int e100_get_regs_len(struct net_device *netdev) { struct nic *nic = netdev_priv(netdev); - return 1 + E100_PHY_REGS + sizeof(nic->mem->dump_buf); + + /* We know the number of registers, and the size of the dump buffer. + * Calculate the total size in bytes. + */ + return (1 + E100_PHY_REGS) * sizeof(u32) + sizeof(nic->mem->dump_buf); } static void e100_get_regs(struct net_device *netdev, @@ -2477,14 +2481,18 @@ static void e100_get_regs(struct net_device *netdev, buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 | ioread8(&nic->csr->scb.cmd_lo) << 16 | ioread16(&nic->csr->scb.status); - for (i = E100_PHY_REGS; i >= 0; i--) - buff[1 + E100_PHY_REGS - i] = - mdio_read(netdev, nic->mii.phy_id, i); + for (i = 0; i < E100_PHY_REGS; i++) + /* Note that we read the registers in reverse order. This + * ordering is the ABI apparently used by ethtool and other + * applications. + */ + buff[1 + i] = mdio_read(netdev, nic->mii.phy_id, + E100_PHY_REGS - 1 - i); memset(nic->mem->dump_buf, 0, sizeof(nic->mem->dump_buf)); e100_exec_cb(nic, NULL, e100_dump); msleep(10); - memcpy(&buff[2 + E100_PHY_REGS], nic->mem->dump_buf, - sizeof(nic->mem->dump_buf)); + memcpy(&buff[1 + E100_PHY_REGS], nic->mem->dump_buf, + sizeof(nic->mem->dump_buf)); } static void e100_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) @@ -2948,7 +2956,7 @@ static int e100_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* Wol magic packet can be enabled from eeprom */ if ((nic->mac >= mac_82558_D101_A4) && - (nic->eeprom[eeprom_id] & eeprom_id_wol)) { + (le16_to_cpu(nic->eeprom[eeprom_id]) & eeprom_id_wol)) { nic->flags |= wol_magic; device_set_wakeup_enable(&pdev->dev, true); } |