diff options
Diffstat (limited to 'drivers/i2c')
32 files changed, 302 insertions, 181 deletions
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 5ac93f41bfec..8ea850eed18f 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -314,7 +314,8 @@ static int pca_xfer(struct i2c_adapter *i2c_adap, DEB2("BUS ERROR - SDA Stuck low\n"); pca_reset(adap); goto out; - case 0x90: /* Bus error - SCL stuck low */ + case 0x78: /* Bus error - SCL stuck low (PCA9665) */ + case 0x90: /* Bus error - SCL stuck low (PCA9564) */ DEB2("BUS ERROR - SCL Stuck low\n"); pca_reset(adap); goto out; diff --git a/drivers/i2c/busses/i2c-altera.c b/drivers/i2c/busses/i2c-altera.c index 5255d3755411..a60042431370 100644 --- a/drivers/i2c/busses/i2c-altera.c +++ b/drivers/i2c/busses/i2c-altera.c @@ -70,6 +70,7 @@ * @isr_mask: cached copy of local ISR enables. * @isr_status: cached copy of local ISR status. * @lock: spinlock for IRQ synchronization. + * @isr_mutex: mutex for IRQ thread. */ struct altr_i2c_dev { void __iomem *base; @@ -86,6 +87,7 @@ struct altr_i2c_dev { u32 isr_mask; u32 isr_status; spinlock_t lock; /* IRQ synchronization */ + struct mutex isr_mutex; }; static void @@ -171,7 +173,7 @@ static void altr_i2c_init(struct altr_i2c_dev *idev) /* SCL Low Time */ writel(t_low, idev->base + ALTR_I2C_SCL_LOW); /* SDA Hold Time, 300ns */ - writel(div_u64(300 * clk_mhz, 1000), idev->base + ALTR_I2C_SDA_HOLD); + writel(3 * clk_mhz / 10, idev->base + ALTR_I2C_SDA_HOLD); /* Mask all master interrupt bits */ altr_i2c_int_enable(idev, ALTR_I2C_ALL_IRQ, false); @@ -245,10 +247,11 @@ static irqreturn_t altr_i2c_isr(int irq, void *_dev) struct altr_i2c_dev *idev = _dev; u32 status = idev->isr_status; + mutex_lock(&idev->isr_mutex); if (!idev->msg) { dev_warn(idev->dev, "unexpected interrupt\n"); altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ); - return IRQ_HANDLED; + goto out; } read = (idev->msg->flags & I2C_M_RD) != 0; @@ -301,6 +304,8 @@ static irqreturn_t altr_i2c_isr(int irq, void *_dev) complete(&idev->msg_complete); dev_dbg(idev->dev, "Message Complete\n"); } +out: + mutex_unlock(&idev->isr_mutex); return IRQ_HANDLED; } @@ -312,6 +317,7 @@ static int altr_i2c_xfer_msg(struct altr_i2c_dev *idev, struct i2c_msg *msg) u32 value; u8 addr = i2c_8bit_addr_from_msg(msg); + mutex_lock(&idev->isr_mutex); idev->msg = msg; idev->msg_len = msg->len; idev->buf = msg->buf; @@ -336,6 +342,7 @@ static int altr_i2c_xfer_msg(struct altr_i2c_dev *idev, struct i2c_msg *msg) altr_i2c_int_enable(idev, imask, true); altr_i2c_fill_tx_fifo(idev); } + mutex_unlock(&idev->isr_mutex); time_left = wait_for_completion_timeout(&idev->msg_complete, ALTR_I2C_XFER_TIMEOUT); @@ -384,7 +391,6 @@ static int altr_i2c_probe(struct platform_device *pdev) struct altr_i2c_dev *idev = NULL; struct resource *res; int irq, ret; - u32 val; idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL); if (!idev) @@ -410,18 +416,19 @@ static int altr_i2c_probe(struct platform_device *pdev) idev->dev = &pdev->dev; init_completion(&idev->msg_complete); spin_lock_init(&idev->lock); + mutex_init(&idev->isr_mutex); - val = device_property_read_u32(idev->dev, "fifo-size", + ret = device_property_read_u32(idev->dev, "fifo-size", &idev->fifo_size); - if (val) { + if (ret) { dev_err(&pdev->dev, "FIFO size set to default of %d\n", ALTR_I2C_DFLT_FIFO_SZ); idev->fifo_size = ALTR_I2C_DFLT_FIFO_SZ; } - val = device_property_read_u32(idev->dev, "clock-frequency", + ret = device_property_read_u32(idev->dev, "clock-frequency", &idev->bus_clk_rate); - if (val) { + if (ret) { dev_err(&pdev->dev, "Default to 100kHz\n"); idev->bus_clk_rate = 100000; /* default clock rate */ } diff --git a/drivers/i2c/busses/i2c-amd-mp2-pci.c b/drivers/i2c/busses/i2c-amd-mp2-pci.c index 455e1f36a2a3..2441682269b3 100644 --- a/drivers/i2c/busses/i2c-amd-mp2-pci.c +++ b/drivers/i2c/busses/i2c-amd-mp2-pci.c @@ -349,12 +349,12 @@ static int amd_mp2_pci_probe(struct pci_dev *pci_dev, if (!privdata) return -ENOMEM; + privdata->pci_dev = pci_dev; rc = amd_mp2_pci_init(privdata, pci_dev); if (rc) return rc; mutex_init(&privdata->c2p_lock); - privdata->pci_dev = pci_dev; pm_runtime_set_autosuspend_delay(&pci_dev->dev, 1000); pm_runtime_use_autosuspend(&pci_dev->dev); diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index fa66951b05d0..dad6e432de89 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -108,6 +108,12 @@ #define ASPEED_I2CD_S_TX_CMD BIT(2) #define ASPEED_I2CD_M_TX_CMD BIT(1) #define ASPEED_I2CD_M_START_CMD BIT(0) +#define ASPEED_I2CD_MASTER_CMDS_MASK \ + (ASPEED_I2CD_M_STOP_CMD | \ + ASPEED_I2CD_M_S_RX_CMD_LAST | \ + ASPEED_I2CD_M_RX_CMD | \ + ASPEED_I2CD_M_TX_CMD | \ + ASPEED_I2CD_M_START_CMD) /* 0x18 : I2CD Slave Device Address Register */ #define ASPEED_I2CD_DEV_ADDR_MASK GENMASK(6, 0) @@ -336,18 +342,19 @@ static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus) struct i2c_msg *msg = &bus->msgs[bus->msgs_index]; u8 slave_addr = i2c_8bit_addr_from_msg(msg); - bus->master_state = ASPEED_I2C_MASTER_START; - #if IS_ENABLED(CONFIG_I2C_SLAVE) /* * If it's requested in the middle of a slave session, set the master * state to 'pending' then H/W will continue handling this master * command when the bus comes back to the idle state. */ - if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE) + if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE) { bus->master_state = ASPEED_I2C_MASTER_PENDING; + return; + } #endif /* CONFIG_I2C_SLAVE */ + bus->master_state = ASPEED_I2C_MASTER_START; bus->buf_index = 0; if (msg->flags & I2C_M_RD) { @@ -422,20 +429,6 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status) } } -#if IS_ENABLED(CONFIG_I2C_SLAVE) - /* - * A pending master command will be started by H/W when the bus comes - * back to idle state after completing a slave operation so change the - * master state from 'pending' to 'start' at here if slave is inactive. - */ - if (bus->master_state == ASPEED_I2C_MASTER_PENDING) { - if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE) - goto out_no_complete; - - bus->master_state = ASPEED_I2C_MASTER_START; - } -#endif /* CONFIG_I2C_SLAVE */ - /* Master is not currently active, irq was for someone else. */ if (bus->master_state == ASPEED_I2C_MASTER_INACTIVE || bus->master_state == ASPEED_I2C_MASTER_PENDING) @@ -462,11 +455,15 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status) #if IS_ENABLED(CONFIG_I2C_SLAVE) /* * If a peer master starts a xfer immediately after it queues a - * master command, change its state to 'pending' then H/W will - * continue the queued master xfer just after completing the - * slave mode session. + * master command, clear the queued master command and change + * its state to 'pending'. To simplify handling of pending + * cases, it uses S/W solution instead of H/W command queue + * handling. */ if (unlikely(irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH)) { + writel(readl(bus->base + ASPEED_I2C_CMD_REG) & + ~ASPEED_I2CD_MASTER_CMDS_MASK, + bus->base + ASPEED_I2C_CMD_REG); bus->master_state = ASPEED_I2C_MASTER_PENDING; dev_dbg(bus->dev, "master goes pending due to a slave start\n"); @@ -606,6 +603,7 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id) /* Ack all interrupts except for Rx done */ writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE, bus->base + ASPEED_I2C_INTR_STS_REG); + readl(bus->base + ASPEED_I2C_INTR_STS_REG); irq_remaining = irq_received; #if IS_ENABLED(CONFIG_I2C_SLAVE) @@ -629,6 +627,14 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id) irq_handled |= aspeed_i2c_master_irq(bus, irq_remaining); } + + /* + * Start a pending master command at here if a slave operation is + * completed. + */ + if (bus->master_state == ASPEED_I2C_MASTER_PENDING && + bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE) + aspeed_i2c_do_start(bus); #else irq_handled = aspeed_i2c_master_irq(bus, irq_remaining); #endif /* CONFIG_I2C_SLAVE */ @@ -640,9 +646,11 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id) irq_received, irq_handled); /* Ack Rx done */ - if (irq_received & ASPEED_I2CD_INTR_RX_DONE) + if (irq_received & ASPEED_I2CD_INTR_RX_DONE) { writel(ASPEED_I2CD_INTR_RX_DONE, bus->base + ASPEED_I2C_INTR_STS_REG); + readl(bus->base + ASPEED_I2C_INTR_STS_REG); + } spin_unlock(&bus->lock); return irq_remaining ? IRQ_NONE : IRQ_HANDLED; } @@ -691,6 +699,15 @@ static int aspeed_i2c_master_xfer(struct i2c_adapter *adap, ASPEED_I2CD_BUS_BUSY_STS)) aspeed_i2c_recover_bus(bus); + /* + * If timed out and the state is still pending, drop the pending + * master command. + */ + spin_lock_irqsave(&bus->lock, flags); + if (bus->master_state == ASPEED_I2C_MASTER_PENDING) + bus->master_state = ASPEED_I2C_MASTER_INACTIVE; + spin_unlock_irqrestore(&bus->lock, flags); + return -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 9d71ce15db05..a51d3b795770 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -377,10 +377,8 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id) * Check for the message size against FIFO depth and set the * 'hold bus' bit if it is greater than FIFO depth. */ - if ((id->recv_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag) + if (id->recv_count > CDNS_I2C_FIFO_DEPTH) ctrl_reg |= CDNS_I2C_CR_HOLD; - else - ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD; cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET); @@ -437,11 +435,8 @@ static void cdns_i2c_msend(struct cdns_i2c *id) * Check for the message size against FIFO depth and set the * 'hold bus' bit if it is greater than FIFO depth. */ - if ((id->send_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag) + if (id->send_count > CDNS_I2C_FIFO_DEPTH) ctrl_reg |= CDNS_I2C_CR_HOLD; - else - ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD; - cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET); /* Clear the interrupts in interrupt status register. */ diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index ddfb81872906..e138c159dbbc 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -346,8 +346,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) /* Optional interface clock */ dev->pclk = devm_clk_get_optional(&pdev->dev, "pclk"); - if (IS_ERR(dev->pclk)) - return PTR_ERR(dev->pclk); + if (IS_ERR(dev->pclk)) { + ret = PTR_ERR(dev->pclk); + goto exit_reset; + } dev->clk = devm_clk_get(&pdev->dev, NULL); if (!i2c_dw_prepare_clk(dev, true)) { @@ -370,10 +372,16 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) adap->dev.of_node = pdev->dev.of_node; adap->nr = -1; - dev_pm_set_driver_flags(&pdev->dev, - DPM_FLAG_SMART_PREPARE | - DPM_FLAG_SMART_SUSPEND | - DPM_FLAG_LEAVE_SUSPENDED); + if (dev->flags & ACCESS_NO_IRQ_SUSPEND) { + dev_pm_set_driver_flags(&pdev->dev, + DPM_FLAG_SMART_PREPARE | + DPM_FLAG_LEAVE_SUSPENDED); + } else { + dev_pm_set_driver_flags(&pdev->dev, + DPM_FLAG_SMART_PREPARE | + DPM_FLAG_SMART_SUSPEND | + DPM_FLAG_LEAVE_SUSPENDED); + } /* The code below assumes runtime PM to be disabled. */ WARN_ON(pm_runtime_enabled(&pdev->dev)); diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index bb810dee8fb5..73f139690e4e 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -180,6 +180,7 @@ static const struct pci_device_id pch_pcidev_id[] = { { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_I2C), 1, }, {0,} }; +MODULE_DEVICE_TABLE(pci, pch_pcidev_id); static irqreturn_t pch_i2c_handler(int irq, void *pData); diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c index 1e2be2219a60..46aef609fb70 100644 --- a/drivers/i2c/busses/i2c-fsi.c +++ b/drivers/i2c/busses/i2c-fsi.c @@ -98,7 +98,7 @@ #define I2C_STAT_DAT_REQ BIT(25) #define I2C_STAT_CMD_COMP BIT(24) #define I2C_STAT_STOP_ERR BIT(23) -#define I2C_STAT_MAX_PORT GENMASK(19, 16) +#define I2C_STAT_MAX_PORT GENMASK(22, 16) #define I2C_STAT_ANY_INT BIT(15) #define I2C_STAT_SCL_IN BIT(11) #define I2C_STAT_SDA_IN BIT(10) diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 3a9e840a3546..a4a6825c8758 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -348,7 +348,7 @@ static struct gpio_desc *i2c_gpio_get_desc(struct device *dev, if (ret == -ENOENT) retdesc = ERR_PTR(-EPROBE_DEFER); - if (ret != -EPROBE_DEFER) + if (PTR_ERR(retdesc) != -EPROBE_DEFER) dev_err(dev, "error trying to get descriptor: %d\n", ret); return retdesc; diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c index 4df1434b3597..16cbf1ebd03d 100644 --- a/drivers/i2c/busses/i2c-hix5hd2.c +++ b/drivers/i2c/busses/i2c-hix5hd2.c @@ -478,6 +478,7 @@ static int hix5hd2_i2c_remove(struct platform_device *pdev) i2c_del_adapter(&priv->adap); pm_runtime_disable(priv->dev); pm_runtime_set_suspended(priv->dev); + clk_disable_unprepare(priv->clk); return 0; } diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c index 25dcd73acd63..8f0e1f802f2d 100644 --- a/drivers/i2c/busses/i2c-jz4780.c +++ b/drivers/i2c/busses/i2c-jz4780.c @@ -73,25 +73,6 @@ #define JZ4780_I2C_STA_TFNF BIT(1) #define JZ4780_I2C_STA_ACT BIT(0) -static const char * const jz4780_i2c_abrt_src[] = { - "ABRT_7B_ADDR_NOACK", - "ABRT_10ADDR1_NOACK", - "ABRT_10ADDR2_NOACK", - "ABRT_XDATA_NOACK", - "ABRT_GCALL_NOACK", - "ABRT_GCALL_READ", - "ABRT_HS_ACKD", - "SBYTE_ACKDET", - "ABRT_HS_NORSTRT", - "SBYTE_NORSTRT", - "ABRT_10B_RD_NORSTRT", - "ABRT_MASTER_DIS", - "ARB_LOST", - "SLVFLUSH_TXFIFO", - "SLV_ARBLOST", - "SLVRD_INTX", -}; - #define JZ4780_I2C_INTST_IGC BIT(11) #define JZ4780_I2C_INTST_ISTT BIT(10) #define JZ4780_I2C_INTST_ISTP BIT(9) @@ -529,21 +510,8 @@ done: static void jz4780_i2c_txabrt(struct jz4780_i2c *i2c, int src) { - int i; - - dev_err(&i2c->adap.dev, "txabrt: 0x%08x\n", src); - dev_err(&i2c->adap.dev, "device addr=%x\n", - jz4780_i2c_readw(i2c, JZ4780_I2C_TAR)); - dev_err(&i2c->adap.dev, "send cmd count:%d %d\n", - i2c->cmd, i2c->cmd_buf[i2c->cmd]); - dev_err(&i2c->adap.dev, "receive data count:%d %d\n", - i2c->cmd, i2c->data_buf[i2c->cmd]); - - for (i = 0; i < 16; i++) { - if (src & BIT(i)) - dev_dbg(&i2c->adap.dev, "I2C TXABRT[%d]=%s\n", - i, jz4780_i2c_abrt_src[i]); - } + dev_dbg(&i2c->adap.dev, "txabrt: 0x%08x, cmd: %d, send: %d, recv: %d\n", + src, i2c->cmd, i2c->cmd_buf[i2c->cmd], i2c->data_buf[i2c->cmd]); } static inline int jz4780_i2c_xfer_read(struct jz4780_i2c *i2c, diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-mlxcpld.c index 2fd717d8dd30..71d7bae2cbca 100644 --- a/drivers/i2c/busses/i2c-mlxcpld.c +++ b/drivers/i2c/busses/i2c-mlxcpld.c @@ -337,9 +337,9 @@ static int mlxcpld_i2c_wait_for_tc(struct mlxcpld_i2c_priv *priv) if (priv->smbus_block && (val & MLXCPLD_I2C_SMBUS_BLK_BIT)) { mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_NUM_DAT_REG, &datalen, 1); - if (unlikely(datalen > (I2C_SMBUS_BLOCK_MAX + 1))) { + if (unlikely(datalen > I2C_SMBUS_BLOCK_MAX)) { dev_err(priv->dev, "Incorrect smbus block read message len\n"); - return -E2BIG; + return -EPROTO; } } else { datalen = priv->xfer.data_len; diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index 29eae1bf4f86..2152ec5f535c 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -875,7 +875,7 @@ static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id) static u32 mtk_i2c_functionality(struct i2c_adapter *adap) { - if (adap->quirks->flags & I2C_AQ_NO_ZERO_LEN) + if (i2c_check_quirks(adap, I2C_AQ_NO_ZERO_LEN)) return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); else diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c index ee2412b7459c..78c5fcc0406c 100644 --- a/drivers/i2c/busses/i2c-nvidia-gpu.c +++ b/drivers/i2c/busses/i2c-nvidia-gpu.c @@ -8,6 +8,7 @@ #include <linux/delay.h> #include <linux/i2c.h> #include <linux/interrupt.h> +#include <linux/iopoll.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/platform_device.h> @@ -75,20 +76,15 @@ static void gpu_enable_i2c_bus(struct gpu_i2c_dev *i2cd) static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd) { - unsigned long target = jiffies + msecs_to_jiffies(1000); u32 val; + int ret; - do { - val = readl(i2cd->regs + I2C_MST_CNTL); - if (!(val & I2C_MST_CNTL_CYCLE_TRIGGER)) - break; - if ((val & I2C_MST_CNTL_STATUS) != - I2C_MST_CNTL_STATUS_BUS_BUSY) - break; - usleep_range(500, 600); - } while (time_is_after_jiffies(target)); - - if (time_is_before_jiffies(target)) { + ret = readl_poll_timeout(i2cd->regs + I2C_MST_CNTL, val, + !(val & I2C_MST_CNTL_CYCLE_TRIGGER) || + (val & I2C_MST_CNTL_STATUS) != I2C_MST_CNTL_STATUS_BUS_BUSY, + 500, 1000 * USEC_PER_MSEC); + + if (ret) { dev_err(i2cd->dev, "i2c timeout error %x\n", val); return -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-octeon-core.c b/drivers/i2c/busses/i2c-octeon-core.c index d9607905dc2f..75e3779bb650 100644 --- a/drivers/i2c/busses/i2c-octeon-core.c +++ b/drivers/i2c/busses/i2c-octeon-core.c @@ -17,6 +17,7 @@ #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/pci.h> #include "i2c-octeon-core.h" @@ -658,7 +659,16 @@ out: void octeon_i2c_set_clock(struct octeon_i2c *i2c) { int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff; - int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000; + /* starting value on search for lowest diff */ + const int huge_delta = 1000000; + /* + * Find divisors to produce target frequency, start with large delta + * to cover wider range of divisors, note thp = TCLK half period. + */ + int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = huge_delta; + + if (octeon_i2c_is_otx2(to_pci_dev(i2c->dev))) + thp = 0x3; for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) { /* @@ -672,17 +682,25 @@ void octeon_i2c_set_clock(struct octeon_i2c *i2c) */ tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10; tclk *= (1 << ndiv_idx); - thp_base = (i2c->sys_freq / (tclk * 2)) - 1; + if (octeon_i2c_is_otx2(to_pci_dev(i2c->dev))) + thp_base = (i2c->sys_freq / tclk) - 2; + else + thp_base = (i2c->sys_freq / (tclk * 2)) - 1; for (inc = 0; inc <= 1; inc++) { thp_idx = thp_base + inc; if (thp_idx < 5 || thp_idx > 0xff) continue; - foscl = i2c->sys_freq / (2 * (thp_idx + 1)); + if (octeon_i2c_is_otx2(to_pci_dev(i2c->dev))) + foscl = i2c->sys_freq / (thp_idx + 2); + else + foscl = i2c->sys_freq / + (2 * (thp_idx + 1)); foscl = foscl / (1 << ndiv_idx); foscl = foscl / (mdiv_idx + 1) / 10; diff = abs(foscl - i2c->twsi_freq); + /* Use it if smaller diff from target */ if (diff < delta_hz) { delta_hz = diff; thp = thp_idx; diff --git a/drivers/i2c/busses/i2c-octeon-core.h b/drivers/i2c/busses/i2c-octeon-core.h index 9bb9f64fdda0..15d379bf1d3c 100644 --- a/drivers/i2c/busses/i2c-octeon-core.h +++ b/drivers/i2c/busses/i2c-octeon-core.h @@ -211,6 +211,20 @@ static inline void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data) octeon_i2c_writeq_flush(data, i2c->twsi_base + TWSI_INT(i2c)); } +#define PCI_SUBSYS_DEVID_9XXX 0xB +/** + * octeon_i2c_is_otx2 - check for chip ID + * @pdev: PCI dev structure + * + * Returns TRUE if OcteonTX2, FALSE otherwise. + */ +static inline bool octeon_i2c_is_otx2(struct pci_dev *pdev) +{ + u32 chip_id = (pdev->subsystem_device >> 12) & 0xF; + + return (chip_id == PCI_SUBSYS_DEVID_9XXX); +} + /* Prototypes */ irqreturn_t octeon_i2c_isr(int irq, void *dev_id); int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num); diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c index a7a81846d5b1..635dd697ac0b 100644 --- a/drivers/i2c/busses/i2c-pca-platform.c +++ b/drivers/i2c/busses/i2c-pca-platform.c @@ -140,7 +140,7 @@ static int i2c_pca_pf_probe(struct platform_device *pdev) int ret = 0; int irq; - irq = platform_get_irq(pdev, 0); + irq = platform_get_irq_optional(pdev, 0); /* If irq is 0, we do polling. */ if (irq < 0) irq = 0; diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index cba325eb852f..2f1ff472aa78 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -957,7 +957,8 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) } if (dev->vendor == PCI_VENDOR_ID_AMD && - dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) { + (dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS || + dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)) { retval = piix4_setup_sb800(dev, id, 1); } diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 2c3c3d6935c0..d0c557c8d80f 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -312,11 +312,10 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) dev_err(dev, "IBMR: %08x IDBR: %08x ICR: %08x ISR: %08x\n", readl(_IBMR(i2c)), readl(_IDBR(i2c)), readl(_ICR(i2c)), readl(_ISR(i2c))); - dev_dbg(dev, "log: "); + dev_err(dev, "log:"); for (i = 0; i < i2c->irqlogidx; i++) - pr_debug("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]); - - pr_debug("\n"); + pr_cont(" [%03x:%05x]", i2c->isrlog[i], i2c->icrlog[i]); + pr_cont("\n"); } #else /* ifdef DEBUG */ @@ -706,11 +705,9 @@ static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c) { u32 icr; - /* - * Clear the STOP and ACK flags - */ + /* Clear the START, STOP, ACK, TB and MA flags */ icr = readl(_ICR(i2c)); - icr &= ~(ICR_STOP | ICR_ACKNAK); + icr &= ~(ICR_START | ICR_STOP | ICR_ACKNAK | ICR_TB | ICR_MA); writel(icr, _ICR(i2c)); } diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 715ddc5d0eac..509fd583de89 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -367,7 +367,6 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, geni_se_select_mode(se, GENI_SE_FIFO); writel_relaxed(len, se->base + SE_I2C_RX_TRANS_LEN); - geni_se_setup_m_cmd(se, I2C_READ, m_param); if (dma_buf && geni_se_rx_dma_prep(se, dma_buf, len, &rx_dma)) { geni_se_select_mode(se, GENI_SE_FIFO); @@ -375,6 +374,8 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, dma_buf = NULL; } + geni_se_setup_m_cmd(se, I2C_READ, m_param); + time_left = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT); if (!time_left) geni_i2c_abort_xfer(gi2c); @@ -408,7 +409,6 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, geni_se_select_mode(se, GENI_SE_FIFO); writel_relaxed(len, se->base + SE_I2C_TX_TRANS_LEN); - geni_se_setup_m_cmd(se, I2C_WRITE, m_param); if (dma_buf && geni_se_tx_dma_prep(se, dma_buf, len, &tx_dma)) { geni_se_select_mode(se, GENI_SE_FIFO); @@ -416,6 +416,8 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, dma_buf = NULL; } + geni_se_setup_m_cmd(se, I2C_WRITE, m_param); + if (!dma_buf) /* Get FIFO IRQ */ writel_relaxed(1, se->base + SE_GENI_TX_WATERMARK_REG); diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 531c01100b56..0b90aa0318df 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -580,13 +580,14 @@ static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv) rcar_i2c_write(priv, ICSIER, SDR | SSR | SAR); } - rcar_i2c_write(priv, ICSSR, ~SAR & 0xff); + /* Clear SSR, too, because of old STOPs to other clients than us */ + rcar_i2c_write(priv, ICSSR, ~(SAR | SSR) & 0xff); } /* master sent stop */ if (ssr_filtered & SSR) { i2c_slave_event(priv->slave, I2C_SLAVE_STOP, &value); - rcar_i2c_write(priv, ICSIER, SAR | SSR); + rcar_i2c_write(priv, ICSIER, SAR); rcar_i2c_write(priv, ICSSR, ~SSR & 0xff); } @@ -850,7 +851,7 @@ static int rcar_reg_slave(struct i2c_client *slave) priv->slave = slave; rcar_i2c_write(priv, ICSAR, slave->addr); rcar_i2c_write(priv, ICSSR, 0); - rcar_i2c_write(priv, ICSIER, SAR | SSR); + rcar_i2c_write(priv, ICSIER, SAR); rcar_i2c_write(priv, ICSCR, SIE | SDBS); return 0; @@ -862,11 +863,14 @@ static int rcar_unreg_slave(struct i2c_client *slave) WARN_ON(!priv->slave); - /* disable irqs and ensure none is running before clearing ptr */ + /* ensure no irq is running before clearing ptr */ + disable_irq(priv->irq); rcar_i2c_write(priv, ICSIER, 0); - rcar_i2c_write(priv, ICSCR, 0); + rcar_i2c_write(priv, ICSSR, 0); + enable_irq(priv->irq); + rcar_i2c_write(priv, ICSCR, SDBS); + rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */ - synchronize_irq(priv->irq); priv->slave = NULL; pm_runtime_put(rcar_i2c_priv_to_dev(priv)); @@ -971,6 +975,8 @@ static int rcar_i2c_probe(struct platform_device *pdev) if (ret < 0) goto out_pm_put; + rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */ + if (priv->devtype == I2C_RCAR_GEN3) { priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); if (!IS_ERR(priv->rstc)) { diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c index 54e1fc8a495e..f7f7b5b64720 100644 --- a/drivers/i2c/busses/i2c-st.c +++ b/drivers/i2c/busses/i2c-st.c @@ -434,6 +434,7 @@ static void st_i2c_wr_fill_tx_fifo(struct st_i2c_dev *i2c_dev) /** * st_i2c_rd_fill_tx_fifo() - Fill the Tx FIFO in read mode * @i2c_dev: Controller's private data + * @max: Maximum amount of data to fill into the Tx FIFO * * This functions fills the Tx FIFO with fixed pattern when * in read mode to trigger clock. diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c index 07d5dfce68d4..1da347e6a358 100644 --- a/drivers/i2c/busses/i2c-stm32.c +++ b/drivers/i2c/busses/i2c-stm32.c @@ -20,13 +20,13 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev, dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL); if (!dma) - return NULL; + return ERR_PTR(-ENOMEM); /* Request and configure I2C TX dma channel */ - dma->chan_tx = dma_request_slave_channel(dev, "tx"); - if (!dma->chan_tx) { + dma->chan_tx = dma_request_chan(dev, "tx"); + if (IS_ERR(dma->chan_tx)) { dev_dbg(dev, "can't request DMA tx channel\n"); - ret = -EINVAL; + ret = PTR_ERR(dma->chan_tx); goto fail_al; } @@ -42,10 +42,10 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev, } /* Request and configure I2C RX dma channel */ - dma->chan_rx = dma_request_slave_channel(dev, "rx"); - if (!dma->chan_rx) { + dma->chan_rx = dma_request_chan(dev, "rx"); + if (IS_ERR(dma->chan_rx)) { dev_err(dev, "can't request DMA rx channel\n"); - ret = -EINVAL; + ret = PTR_ERR(dma->chan_rx); goto fail_tx; } @@ -75,7 +75,7 @@ fail_al: devm_kfree(dev, dma); dev_info(dev, "can't use DMA\n"); - return NULL; + return ERR_PTR(ret); } void stm32_i2c_dma_free(struct stm32_i2c_dma *dma) diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index 3d90c0bb049e..c2ac212ce70c 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -305,7 +305,7 @@ struct stm32f7_i2c_dev { struct regmap *regmap; }; -/** +/* * All these values are coming from I2C Specification, Version 6.0, 4th of * April 2014. * @@ -1189,6 +1189,8 @@ static void stm32f7_i2c_slave_start(struct stm32f7_i2c_dev *i2c_dev) STM32F7_I2C_CR1_TXIE; stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask); + /* Write 1st data byte */ + writel_relaxed(value, base + STM32F7_I2C_TXDR); } else { /* Notify i2c slave that new write transfer is starting */ i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value); @@ -1262,8 +1264,8 @@ static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev, * slave[0] supports 7-bit and 10-bit slave address * slave[1] supports 7-bit slave address only */ - for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) { - if (i == 1 && (slave->flags & I2C_CLIENT_PEC)) + for (i = STM32F7_I2C_MAX_SLAVE - 1; i >= 0; i--) { + if (i == 1 && (slave->flags & I2C_CLIENT_TEN)) continue; if (!i2c_dev->slave[i]) { *id = i; @@ -1498,7 +1500,7 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data) void __iomem *base = i2c_dev->base; struct device *dev = i2c_dev->dev; struct stm32_i2c_dma *dma = i2c_dev->dma; - u32 mask, status; + u32 status; status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR); @@ -1523,12 +1525,15 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data) f7_msg->result = -EINVAL; } - /* Disable interrupts */ - if (stm32f7_i2c_is_slave_registered(i2c_dev)) - mask = STM32F7_I2C_XFER_IRQ_MASK; - else - mask = STM32F7_I2C_ALL_IRQ_MASK; - stm32f7_i2c_disable_irq(i2c_dev, mask); + if (!i2c_dev->slave_running) { + u32 mask; + /* Disable interrupts */ + if (stm32f7_i2c_is_slave_registered(i2c_dev)) + mask = STM32F7_I2C_XFER_IRQ_MASK; + else + mask = STM32F7_I2C_ALL_IRQ_MASK; + stm32f7_i2c_disable_irq(i2c_dev, mask); + } /* Disable dma */ if (i2c_dev->use_dma) { @@ -1946,6 +1951,15 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) i2c_dev->dma = stm32_i2c_dma_request(i2c_dev->dev, phy_addr, STM32F7_I2C_TXDR, STM32F7_I2C_RXDR); + if (PTR_ERR(i2c_dev->dma) == -ENODEV) + i2c_dev->dma = NULL; + else if (IS_ERR(i2c_dev->dma)) { + ret = PTR_ERR(i2c_dev->dma); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "Failed to request dma error %i\n", ret); + goto clk_free; + } platform_set_drvdata(pdev, i2c_dev); @@ -1976,6 +1990,11 @@ pm_disable: pm_runtime_set_suspended(i2c_dev->dev); pm_runtime_dont_use_autosuspend(i2c_dev->dev); + if (i2c_dev->dma) { + stm32_i2c_dma_free(i2c_dev->dma); + i2c_dev->dma = NULL; + } + clk_free: clk_disable_unprepare(i2c_dev->clk); @@ -1986,21 +2005,21 @@ static int stm32f7_i2c_remove(struct platform_device *pdev) { struct stm32f7_i2c_dev *i2c_dev = platform_get_drvdata(pdev); - if (i2c_dev->dma) { - stm32_i2c_dma_free(i2c_dev->dma); - i2c_dev->dma = NULL; - } - i2c_del_adapter(&i2c_dev->adap); pm_runtime_get_sync(i2c_dev->dev); - clk_disable_unprepare(i2c_dev->clk); - pm_runtime_put_noidle(i2c_dev->dev); pm_runtime_disable(i2c_dev->dev); pm_runtime_set_suspended(i2c_dev->dev); pm_runtime_dont_use_autosuspend(i2c_dev->dev); + if (i2c_dev->dma) { + stm32_i2c_dma_free(i2c_dev->dma); + i2c_dev->dma = NULL; + } + + clk_disable_unprepare(i2c_dev->clk); + return 0; } diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c index 19f8eec38717..2449a6dac19b 100644 --- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c +++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c @@ -200,6 +200,12 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev, if (ret) goto error; + /* + * For OcteonTX2 chips, set reference frequency to 100MHz + * as refclk_src in TWSI_MODE register defaults to 100MHz. + */ + if (octeon_i2c_is_otx2(pdev)) + i2c->sys_freq = 100000000; octeon_i2c_set_clock(i2c); i2c->adap = thunderx_i2c_ops; diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c index d84095591e45..ac5150ee0803 100644 --- a/drivers/i2c/i2c-core-acpi.c +++ b/drivers/i2c/i2c-core-acpi.c @@ -39,6 +39,7 @@ struct i2c_acpi_lookup { int index; u32 speed; u32 min_speed; + u32 force_speed; }; /** @@ -259,6 +260,19 @@ i2c_acpi_match_device(const struct acpi_device_id *matches, return acpi_match_device(matches, &client->dev); } +static const struct acpi_device_id i2c_acpi_force_400khz_device_ids[] = { + /* + * These Silead touchscreen controllers only work at 400KHz, for + * some reason they do not work at 100KHz. On some devices the ACPI + * tables list another device at their bus as only being capable + * of 100KHz, testing has shown that these other devices work fine + * at 400KHz (as can be expected of any recent i2c hw) so we force + * the speed of the bus to 400 KHz if a Silead device is present. + */ + { "MSSL1680", 0 }, + {} +}; + static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level, void *data, void **return_value) { @@ -277,6 +291,9 @@ static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level, if (lookup->speed <= lookup->min_speed) lookup->min_speed = lookup->speed; + if (acpi_match_device_ids(adev, i2c_acpi_force_400khz_device_ids) == 0) + lookup->force_speed = 400000; + return AE_OK; } @@ -314,7 +331,16 @@ u32 i2c_acpi_find_bus_speed(struct device *dev) return 0; } - return lookup.min_speed != UINT_MAX ? lookup.min_speed : 0; + if (lookup.force_speed) { + if (lookup.force_speed != lookup.min_speed) + dev_warn(dev, FW_BUG "DSDT uses known not-working I2C bus speed %d, forcing it to %d\n", + lookup.min_speed, lookup.force_speed); + return lookup.force_speed; + } else if (lookup.min_speed != UINT_MAX) { + return lookup.min_speed; + } else { + return 0; + } } EXPORT_SYMBOL_GPL(i2c_acpi_find_bus_speed); @@ -345,10 +371,18 @@ static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle) static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev) { struct device *dev; + struct i2c_client *client; dev = bus_find_device(&i2c_bus_type, NULL, adev, i2c_acpi_find_match_device); - return dev ? i2c_verify_client(dev) : NULL; + if (!dev) + return NULL; + + client = i2c_verify_client(dev); + if (!client) + put_device(dev); + + return client; } static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value, diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 9e43508d4567..d46ae60fd8d0 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -186,10 +186,11 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap) * If we can set SDA, we will always create a STOP to ensure additional * pulses will do no harm. This is achieved by letting SDA follow SCL * half a cycle later. Check the 'incomplete_write_byte' fault injector - * for details. + * for details. Note that we must honour tsu:sto, 4us, but lets use 5us + * here for simplicity. */ bri->set_scl(adap, scl); - ndelay(RECOVERY_NDELAY / 2); + ndelay(RECOVERY_NDELAY); if (bri->set_sda) bri->set_sda(adap, scl); ndelay(RECOVERY_NDELAY / 2); @@ -211,7 +212,13 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap) scl = !scl; bri->set_scl(adap, scl); /* Creating STOP again, see above */ - ndelay(RECOVERY_NDELAY / 2); + if (scl) { + /* Honour minimum tsu:sto */ + ndelay(RECOVERY_NDELAY); + } else { + /* Honour minimum tf and thd:dat */ + ndelay(RECOVERY_NDELAY / 2); + } if (bri->set_sda) bri->set_sda(adap, scl); ndelay(RECOVERY_NDELAY / 2); @@ -329,8 +336,10 @@ static int i2c_device_probe(struct device *dev) } else if (ACPI_COMPANION(dev)) { irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 0); } - if (irq == -EPROBE_DEFER) - return irq; + if (irq == -EPROBE_DEFER) { + status = irq; + goto put_sync_adapter; + } if (irq < 0) irq = 0; @@ -344,16 +353,20 @@ static int i2c_device_probe(struct device *dev) */ if (!driver->id_table && !i2c_acpi_match_device(dev->driver->acpi_match_table, client) && - !i2c_of_match_device(dev->driver->of_match_table, client)) - return -ENODEV; + !i2c_of_match_device(dev->driver->of_match_table, client)) { + status = -ENODEV; + goto put_sync_adapter; + } if (client->flags & I2C_CLIENT_WAKE) { int wakeirq = -ENOENT; if (dev->of_node) { wakeirq = of_irq_get_byname(dev->of_node, "wakeup"); - if (wakeirq == -EPROBE_DEFER) - return wakeirq; + if (wakeirq == -EPROBE_DEFER) { + status = wakeirq; + goto put_sync_adapter; + } } device_init_wakeup(&client->dev, true); @@ -401,6 +414,10 @@ err_detach_pm_domain: err_clear_wakeup_irq: dev_pm_clear_wake_irq(&client->dev); device_init_wakeup(&client->dev, false); +put_sync_adapter: + if (client->flags & I2C_CLIENT_HOST_NOTIFY) + pm_runtime_put_sync(&client->adapter->dev); + return status; } @@ -721,7 +738,7 @@ static int i2c_dev_irq_from_resources(const struct resource *resources, * This returns the new i2c client, which may be saved for later use with * i2c_unregister_device(); or an ERR_PTR to describe the error. */ -static struct i2c_client * +struct i2c_client * i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *info) { struct i2c_client *client; @@ -887,8 +904,7 @@ static struct i2c_driver dummy_driver = { * This returns the new i2c client, which should be saved for later use with * i2c_unregister_device(); or an ERR_PTR to describe the error. */ -static struct i2c_client * -i2c_new_dummy_device(struct i2c_adapter *adapter, u16 address) +struct i2c_client *i2c_new_dummy_device(struct i2c_adapter *adapter, u16 address) { struct i2c_board_info info = { I2C_BOARD_INFO("dummy", address), diff --git a/drivers/i2c/i2c-core-of.c b/drivers/i2c/i2c-core-of.c index 406e5f695a7e..f0914a660316 100644 --- a/drivers/i2c/i2c-core-of.c +++ b/drivers/i2c/i2c-core-of.c @@ -249,14 +249,14 @@ static int of_i2c_notify(struct notifier_block *nb, unsigned long action, } client = of_i2c_register_device(adap, rd->dn); - put_device(&adap->dev); - if (IS_ERR(client)) { dev_err(&adap->dev, "failed to create client for '%pOF'\n", rd->dn); + put_device(&adap->dev); of_node_clear_flag(rd->dn, OF_POPULATED); return notifier_from_errno(PTR_ERR(client)); } + put_device(&adap->dev); break; case OF_RECONFIG_CHANGE_REMOVE: /* already depopulated? */ diff --git a/drivers/i2c/i2c-core-slave.c b/drivers/i2c/i2c-core-slave.c index 5427f047faf0..1589179d5eb9 100644 --- a/drivers/i2c/i2c-core-slave.c +++ b/drivers/i2c/i2c-core-slave.c @@ -18,10 +18,8 @@ int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb) { int ret; - if (!client || !slave_cb) { - WARN(1, "insufficient data\n"); + if (WARN(IS_ERR_OR_NULL(client) || !slave_cb, "insufficient data\n")) return -EINVAL; - } if (!(client->flags & I2C_CLIENT_SLAVE)) dev_warn(&client->dev, "%s: client slave flag not set. You might see address collisions\n", @@ -60,6 +58,9 @@ int i2c_slave_unregister(struct i2c_client *client) { int ret; + if (IS_ERR_OR_NULL(client)) + return -EINVAL; + if (!client->adapter->algo->unreg_slave) { dev_err(&client->dev, "%s: not supported by adapter\n", __func__); return -EOPNOTSUPP; diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c index 3ac426a8ab5a..c2ae8c8cd429 100644 --- a/drivers/i2c/i2c-core-smbus.c +++ b/drivers/i2c/i2c-core-smbus.c @@ -495,6 +495,13 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, break; case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_BLOCK_PROC_CALL: + if (msg[1].buf[0] > I2C_SMBUS_BLOCK_MAX) { + dev_err(&adapter->dev, + "Invalid block size returned: %d\n", + msg[1].buf[0]); + status = -EPROTO; + goto cleanup; + } for (i = 0; i < msg[1].buf[0] + 1; i++) data->block[i] = msg[1].buf[i]; break; diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 2ea4585d18c5..94beacc41302 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -40,7 +40,7 @@ struct i2c_dev { struct list_head list; struct i2c_adapter *adap; - struct device *dev; + struct device dev; struct cdev cdev; }; @@ -84,12 +84,14 @@ static struct i2c_dev *get_free_i2c_dev(struct i2c_adapter *adap) return i2c_dev; } -static void put_i2c_dev(struct i2c_dev *i2c_dev) +static void put_i2c_dev(struct i2c_dev *i2c_dev, bool del_cdev) { spin_lock(&i2c_dev_list_lock); list_del(&i2c_dev->list); spin_unlock(&i2c_dev_list_lock); - kfree(i2c_dev); + if (del_cdev) + cdev_device_del(&i2c_dev->cdev, &i2c_dev->dev); + put_device(&i2c_dev->dev); } static ssize_t name_show(struct device *dev, @@ -628,6 +630,14 @@ static const struct file_operations i2cdev_fops = { static struct class *i2c_dev_class; +static void i2cdev_dev_release(struct device *dev) +{ + struct i2c_dev *i2c_dev; + + i2c_dev = container_of(dev, struct i2c_dev, dev); + kfree(i2c_dev); +} + static int i2cdev_attach_adapter(struct device *dev, void *dummy) { struct i2c_adapter *adap; @@ -644,27 +654,23 @@ static int i2cdev_attach_adapter(struct device *dev, void *dummy) cdev_init(&i2c_dev->cdev, &i2cdev_fops); i2c_dev->cdev.owner = THIS_MODULE; - res = cdev_add(&i2c_dev->cdev, MKDEV(I2C_MAJOR, adap->nr), 1); - if (res) - goto error_cdev; - - /* register this i2c device with the driver core */ - i2c_dev->dev = device_create(i2c_dev_class, &adap->dev, - MKDEV(I2C_MAJOR, adap->nr), NULL, - "i2c-%d", adap->nr); - if (IS_ERR(i2c_dev->dev)) { - res = PTR_ERR(i2c_dev->dev); - goto error; + + device_initialize(&i2c_dev->dev); + i2c_dev->dev.devt = MKDEV(I2C_MAJOR, adap->nr); + i2c_dev->dev.class = i2c_dev_class; + i2c_dev->dev.parent = &adap->dev; + i2c_dev->dev.release = i2cdev_dev_release; + dev_set_name(&i2c_dev->dev, "i2c-%d", adap->nr); + + res = cdev_device_add(&i2c_dev->cdev, &i2c_dev->dev); + if (res) { + put_i2c_dev(i2c_dev, false); + return res; } pr_debug("i2c-dev: adapter [%s] registered as minor %d\n", adap->name, adap->nr); return 0; -error: - cdev_del(&i2c_dev->cdev); -error_cdev: - put_i2c_dev(i2c_dev); - return res; } static int i2cdev_detach_adapter(struct device *dev, void *dummy) @@ -680,9 +686,7 @@ static int i2cdev_detach_adapter(struct device *dev, void *dummy) if (!i2c_dev) /* attach_adapter must have failed */ return 0; - cdev_del(&i2c_dev->cdev); - put_i2c_dev(i2c_dev); - device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); + put_i2c_dev(i2c_dev, true); pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name); return 0; diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c index 0e16490eb3a1..5365199a31f4 100644 --- a/drivers/i2c/muxes/i2c-demux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c @@ -272,6 +272,7 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev) err_rollback_available: device_remove_file(&pdev->dev, &dev_attr_available_masters); err_rollback: + i2c_demux_deactivate_master(priv); for (j = 0; j < i; j++) { of_node_put(priv->chan[j].parent_np); of_changeset_destroy(&priv->chan[j].chgset); |